FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 04-13-2008, 02:12 PM
David Baron
 
Default Getting gl518sm sensors working

I recently replaced by MB is an aopen (via chipset). After compiling the
needed module (found by sensor-detect), here is what I get:
~$ sensors
gl518sm-i2c-0-2d
Adapter: SMBus Via Pro adapter at 5000
+5V: +0.00 V (min = +4.68 V, max = +5.18 V)
+3.3V: +0.00 V (min = +3.74 V, max = +4.14 V)
+12V: +0.00 V (min = +15.69 V, max = +17.36 V)
Vcore: +2.03 V (min = +3.74 V, max = +4.14 V)
fan1: 9230 RPM (min = 1200 RPM, div = 8)
fan2: 0 RPM (min = 1200 RPM, div = 8)
temp1: +30.0C (high = +80.0C, hyst = +75.0C)
beep_enable:enabled

Only the core voltage registers. The chassis fan is not plugged into the MB.

My old board had working plus and minus voltages, agp temperature, etc.

Anyone played with such a chipset and got more results?
 

Thread Tools




All times are GMT. The time now is 04:25 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org