FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 05-07-2012, 10:00 AM
 
Default AMD 990X/SB950 USB 2 controler not working on wheezy (kernel 3.2.X-amd64)

When running the latest kernel from wheezy AMD 64, all USB 2 and 3
controlers work. But when running the latest kernel 3.2.0-2-amd64
from wheezy amd64, only the usb 2 controlers do not work anymore.
For information, the usb 3 controler is not from the same vendor.

The USB 2 controlers are listed like this with lspci:

00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
...
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller

Regarding the mainboard specs, the controler is an AMD SB950.

Below is the relevant part from dmesg while booting on the kernel 3.2:

[ 1.272856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.272876] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.272892] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.272911] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.272919] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.272939] QUIRK: Enable AMD PLL fix
[ 1.272948] ehci_hcd 0000:00:12.2: debug port 1
[ 1.272969] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf4105000
[ 1.273568] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
[ 1.273581] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 1.273584] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.273591] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.273704] xhci_hcd 0000:04:00.0: irq 50, io mem 0xf6400000
[ 1.273743] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[ 1.273748] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[ 1.273752] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
[ 1.273757] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
[ 1.273761] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
[ 1.273829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.273831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.273833] usb usb2: Product: xHCI Host Controller
[ 1.273834] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 xhci_hcd
[ 1.273836] usb usb2: SerialNumber: 0000:04:00.0
[ 1.277559] libata version 3.00 loaded.
[ 1.279143] xHCI xhci_add_endpoint called for root hub
[ 1.279145] xHCI xhci_check_bandwidth called for root hub
[ 1.279174] hub 2-0:1.0: USB hub found
[ 1.279180] hub 2-0:1.0: 2 ports detected
[ 1.279243] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.279249] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.279269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.279271] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279273] usb usb3: Product: xHCI Host Controller
[ 1.279274] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 xhci_hcd
[ 1.279275] usb usb3: SerialNumber: 0000:04:00.0
[ 1.279478] xHCI xhci_add_endpoint called for root hub
[ 1.279480] xHCI xhci_check_bandwidth called for root hub
[ 1.279511] hub 3-0:1.0: USB hub found
[ 1.279517] hub 3-0:1.0: 2 ports detected
[ 1.284038] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.284065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.284068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.284070] usb usb1: Product: EHCI Host Controller
[ 1.284072] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.284073] usb usb1: SerialNumber: 0000:00:12.2
[ 1.284164] hub 1-0:1.0: USB hub found
[ 1.284173] hub 1-0:1.0: 5 ports detected
[ 1.284263] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.284288] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.284294] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.284301] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.284319] ehci_hcd 0000:00:13.2: debug port 1
[ 1.284331] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf4103000
[ 1.292301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.296039] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.296052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.296054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.296056] usb usb4: Product: EHCI Host Controller
[ 1.296057] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.296058] usb usb4: SerialNumber: 0000:00:13.2
[ 1.296137] hub 4-0:1.0: USB hub found
[ 1.296141] hub 4-0:1.0: 5 ports detected
[ 1.296196] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.296216] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.296222] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 1.296227] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.296242] ehci_hcd 0000:00:16.2: debug port 1
[ 1.296252] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf4100000
[ 1.308037] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.308052] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.308054] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.308056] usb usb5: Product: EHCI Host Controller
[ 1.308058] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.308059] usb usb5: SerialNumber: 0000:00:16.2
[ 1.308155] hub 5-0:1.0: USB hub found
[ 1.308158] hub 5-0:1.0: 4 ports detected
[ 1.308226] ahci 0000:00:11.0: version 3.0
[ 1.308241] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.308338] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.308341] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.309079] scsi0 : ahci
[ 1.309176] scsi1 : ahci
[ 1.309225] scsi2 : ahci
[ 1.309287] scsi3 : ahci
[ 1.309340] scsi4 : ahci
[ 1.309404] scsi5 : ahci
[ 1.309455] ata1: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107100 irq 19
[ 1.309458] ata2: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107180 irq 19
[ 1.309461] ata3: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107200 irq 19
[ 1.309463] ata4: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107280 irq 19
[ 1.309466] ata5: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107300 irq 19
[ 1.309468] ata6: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107380 irq 19
[ 1.309492] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.309511] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.309520] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 1.309546] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf4106000
[ 1.368026] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368028] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368030] usb usb6: Product: OHCI Host Controller
[ 1.368031] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.368032] usb usb6: SerialNumber: 0000:00:12.0
[ 1.368113] hub 6-0:1.0: USB hub found
[ 1.368118] hub 6-0:1.0: 5 ports detected
[ 1.368165] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.368187] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.368192] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.368204] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf4104000
[ 1.428024] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.428026] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.428028] usb usb7: Product: OHCI Host Controller
[ 1.428029] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.428030] usb usb7: SerialNumber: 0000:00:13.0
[ 1.428109] hub 7-0:1.0: USB hub found
[ 1.428113] hub 7-0:1.0: 5 ports detected
[ 1.428156] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.428168] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.428173] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.428183] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf4102000
[ 1.488024] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.488026] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.488027] usb usb8: Product: OHCI Host Controller
[ 1.488028] usb usb8: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.488030] usb usb8: SerialNumber: 0000:00:14.5
[ 1.488105] hub 8-0:1.0: USB hub found
[ 1.488110] hub 8-0:1.0: 2 ports detected
[ 1.488160] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.488174] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.488181] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.488194] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf4101000
[ 1.548056] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.548058] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.548060] usb usb9: Product: OHCI Host Controller
[ 1.548061] usb usb9: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.548063] usb usb9: SerialNumber: 0000:00:16.0
[ 1.548138] hub 9-0:1.0: USB hub found
[ 1.548143] hub 9-0:1.0: 4 ports detected
[ 1.628038] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.800033] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.800766] ata1.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 1.800769] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.801557] ata1.00: configured for UDMA/133
[ 1.801661] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 1.804034] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.804051] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.804068] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.805491] ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
[ 1.805493] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.807318] ata4.00: configured for UDMA/133
[ 1.807426] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS90, HN00S300, max UDMA/100
[ 1.808804] ata5.00: configured for UDMA/100
[ 1.810476] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.810478] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.816946] ata2.00: configured for UDMA/133
[ 1.817036] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 1.916020] usb 7-1: new low-speed USB device number 2 using ohci_hcd
[ 1.945957] Refined TSC clocksource calibration: 4200.274 MHz.
[ 1.945965] Switching to clocksource tsc
[ 2.028017] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.028787] ata3.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133
[ 2.028790] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.030591] ata3.00: configured for UDMA/133
...
[ 2.308021] usb 7-1: device descriptor read/64, error -32
[ 2.548022] usb 7-1: new low-speed USB device number 3 using ohci_hcd
[ 2.688016] usb 7-1: device descriptor read/64, error -32
[ 2.932031] usb 7-1: device descriptor read/64, error -32
[ 3.172026] usb 7-1: new low-speed USB device number 4 using ohci_hcd
[ 3.580010] usb 7-1: device not accepting address 4, error -32
[ 3.716010] usb 7-1: new low-speed USB device number 5 using ohci_hcd
[ 4.124013] usb 7-1: device not accepting address 5, error -32
[ 4.124076] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 4.415301] PM: Starting manual resume from disk
[ 4.415303] PM: Hibernation image partition 8:2 present
[ 4.415304] PM: Looking for hibernation image.
[ 4.415464] PM: Image not found (code -22)
[ 4.415466] PM: Hibernation image not present or could not be loaded.
[ 4.416013] usb 6-4: new full-speed USB device number 2 using ohci_hcd
[ 4.421764] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4.422033] SGI XFS Quota Management subsystem
[ 4.423027] XFS (sda3): Mounting Filesystem
[ 4.529402] XFS (sda3): Ending clean mount
[ 4.556040] usb 6-4: device descriptor read/64, error -32
[ 4.804019] usb 6-4: device descriptor read/64, error -32
[ 5.072024] usb 6-4: new full-speed USB device number 3 using ohci_hcd
[ 5.212024] usb 6-4: device descriptor read/64, error -32
[ 5.428114] udevd[349]: starting version 175
[ 5.460027] usb 6-4: device descriptor read/64, error -32
[ 5.621520] wmi: Mapper loaded
[ 5.657795] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 5.657799] ACPI: Power Button [PWRB]
[ 5.657851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.657853] ACPI: Power Button [PWRF]
[ 5.657925] ACPI: acpi_idle registered with cpuidle
[ 5.700139] usb 6-4: new full-speed USB device number 4 using ohci_hcd
[ 5.779476] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.801594] EDAC MC: Ver: 2.1.0
[ 5.834733] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.929306] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.929368] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 6.012988] MCE: In-kernel MCE decoding enabled.
[ 6.013639] AMD64 EDAC driver v3.4.0
[ 6.013685] EDAC amd64: DRAM ECC disabled.
[ 6.013691] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.013692] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.013693] (Note that use of the override may cause unknown side effects.)
[ 6.108104] usb 6-4: device not accepting address 4, error -32
[ 6.233984] snd_ctxfi 0000:03:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 6.234257] snd_ctxfi 0000:03:00.0: setting latency timer to 64
[ 6.243184] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[ 6.243186] hda_intel: Disabling MSI
[ 6.243215] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 6.244019] usb 6-4: new full-speed USB device number 5 using ohci_hcd
[ 6.652027] usb 6-4: device not accepting address 5, error -32
[ 6.652091] hub 6-0:1.0: unable to enumerate USB device on port 4

Below is the relevant part of dmesg while trying to plug an USB device on
such a controler while running a kernel 3.2:

[ 163.484102] usb 7-1: new low-speed USB device number 6 using ohci_hcd
[ 163.624100] usb 7-1: device descriptor read/64, error -32
[ 163.868107] usb 7-1: device descriptor read/64, error -32
[ 164.108107] usb 7-1: new low-speed USB device number 7 using ohci_hcd
[ 164.248100] usb 7-1: device descriptor read/64, error -32
[ 164.492100] usb 7-1: device descriptor read/64, error -32
[ 164.732101] usb 7-1: new low-speed USB device number 8 using ohci_hcd
[ 165.140163] usb 7-1: device not accepting address 8, error -32
[ 165.276110] usb 7-1: new low-speed USB device number 9 using ohci_hcd
[ 165.684087] usb 7-1: device not accepting address 9, error -32
[ 165.684168] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 169.092108] usb 6-4: new full-speed USB device number 6 using ohci_hcd
[ 169.232100] usb 6-4: device descriptor read/64, error -32
[ 169.476104] usb 6-4: device descriptor read/64, error -32
[ 169.716101] usb 6-4: new full-speed USB device number 7 using ohci_hcd
[ 169.856182] usb 6-4: device descriptor read/64, error -32
[ 170.100100] usb 6-4: device descriptor read/64, error -32
[ 170.340101] usb 6-4: new full-speed USB device number 8 using ohci_hcd
[ 170.748099] usb 6-4: device not accepting address 8, error -32
[ 170.884108] usb 6-4: new full-speed USB device number 9 using ohci_hcd
[ 171.292090] usb 6-4: device not accepting address 9, error -32
[ 171.292166] hub 6-0:1.0: unable to enumerate USB device on port 4
[ 221.032103] usb 7-4: new low-speed USB device number 10 using ohci_hcd
[ 221.172104] usb 7-4: device descriptor read/64, error -32
[ 221.416103] usb 7-4: device descriptor read/64, error -32
[ 221.656101] usb 7-4: new low-speed USB device number 11 using ohci_hcd
[ 221.796179] usb 7-4: device descriptor read/64, error -32
[ 222.040105] usb 7-4: device descriptor read/64, error -32
[ 222.280102] usb 7-4: new low-speed USB device number 12 using ohci_hcd
[ 222.688095] usb 7-4: device not accepting address 12, error -32
[ 222.824119] usb 7-4: new low-speed USB device number 13 using ohci_hcd
[ 223.232100] usb 7-4: device not accepting address 13, error -32
[ 223.232202] hub 7-0:1.0: unable to enumerate USB device on port 4
[ 250.896108] usb 6-3: new low-speed USB device number 10 using ohci_hcd
[ 251.036104] usb 6-3: device descriptor read/64, error -32
[ 251.280101] usb 6-3: device descriptor read/64, error -32
[ 251.520101] usb 6-3: new low-speed USB device number 11 using ohci_hcd
[ 251.660100] usb 6-3: device descriptor read/64, error -32
[ 251.904107] usb 6-3: device descriptor read/64, error -32
[ 252.144108] usb 6-3: new low-speed USB device number 12 using ohci_hcd
[ 252.552102] usb 6-3: device not accepting address 12, error -32
[ 252.688106] usb 6-3: new low-speed USB device number 13 using ohci_hcd
[ 253.096104] usb 6-3: device not accepting address 13, error -32
[ 253.096207] hub 6-0:1.0: unable to enumerate USB device on port 3
[ 253.232107] usb 6-4: new full-speed USB device number 14 using ohci_hcd
[ 253.372100] usb 6-4: device descriptor read/64, error -32
[ 253.616101] usb 6-4: device descriptor read/64, error -32
[ 253.856122] usb 6-4: new full-speed USB device number 15 using ohci_hcd
[ 253.996101] usb 6-4: device descriptor read/64, error -32
[ 254.240102] usb 6-4: device descriptor read/64, error -32
[ 254.480101] usb 6-4: new full-speed USB device number 16 using ohci_hcd
[ 254.888166] usb 6-4: device not accepting address 16, error -32
[ 255.024105] usb 6-4: new full-speed USB device number 17 using ohci_hcd
[ 255.432099] usb 6-4: device not accepting address 17, error -32
[ 255.432208] hub 6-0:1.0: unable to enumerate USB device on port 4
[ 266.176101] usb 6-4: new full-speed USB device number 18 using ohci_hcd
[ 266.316101] usb 6-4: device descriptor read/64, error -32
[ 266.560101] usb 6-4: device descriptor read/64, error -32
[ 266.800103] usb 6-4: new full-speed USB device number 19 using ohci_hcd
[ 266.940104] usb 6-4: device descriptor read/64, error -32
[ 267.184100] usb 6-4: device descriptor read/64, error -32
[ 267.424101] usb 6-4: new full-speed USB device number 20 using ohci_hcd
[ 267.832098] usb 6-4: device not accepting address 20, error -32
[ 267.968107] usb 6-4: new full-speed USB device number 21 using ohci_hcd
[ 268.376100] usb 6-4: device not accepting address 21, error -32
[ 268.376202] hub 6-0:1.0: unable to enumerate USB device on port 4


Below is the relevant part of dmesg while booting on a kernel 2.6:

[ 0.748286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.748304] alloc irq_desc for 18 on node -1
[ 0.748306] alloc kstat_irqs on node -1
[ 0.748312] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.748374] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.748390] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.748416] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf4106000
[ 0.748580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.748582] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.749877] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.749891] alloc irq_desc for 46 on node -1
[ 0.749892] alloc kstat_irqs on node -1
[ 0.749897] r8169 0000:02:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
[ 0.749932] r8169 0000:02:00.0: setting latency timer to 64
[ 0.749938] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 0.749981] alloc irq_desc for 60 on node -1
[ 0.749982] alloc kstat_irqs on node -1
[ 0.749991] r8169 0000:02:00.0: irq 60 for MSI/MSI-X
[ 0.750442] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000c4c000, 8c:89:a5:61:54:1e, XID 0c900800 IRQ 60
[ 0.751383] alloc irq_desc for 50 on node -1
[ 0.751385] alloc kstat_irqs on node -1
[ 0.751390] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
[ 0.751406] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 0.751409] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.751415] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 0.751517] xhci_hcd 0000:04:00.0: irq 50, io mem 0xf6400000
[ 0.754981] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 0.754988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.754990] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.754992] usb usb2: Product: xHCI Host Controller
[ 0.754993] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 0.754994] usb usb2: SerialNumber: 0000:04:00.0
[ 0.755072] usb usb2: configuration #1 chosen from 1 choice
[ 0.755075] xHCI xhci_add_endpoint called for root hub
[ 0.755076] xHCI xhci_check_bandwidth called for root hub
[ 0.755116] hub 2-0:1.0: USB hub found
[ 0.755121] hub 2-0:1.0: 4 ports detected
[ 0.770831] libata version 3.00 loaded.
[ 0.808356] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808360] usb usb1: Product: OHCI Host Controller
[ 0.808361] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.808362] usb usb1: SerialNumber: 0000:00:12.0
[ 0.808413] usb usb1: configuration #1 chosen from 1 choice
[ 0.808435] hub 1-0:1.0: USB hub found
[ 0.808442] hub 1-0:1.0: 5 ports detected
[ 0.808496] alloc irq_desc for 17 on node -1
[ 0.808497] alloc kstat_irqs on node -1
[ 0.808502] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.808521] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.808531] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 0.808540] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 0.808556] ehci_hcd 0000:00:12.2: debug port 1
[ 0.808570] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf4105000
[ 0.820416] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.820430] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.820432] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.820433] usb usb3: Product: EHCI Host Controller
[ 0.820434] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.820435] usb usb3: SerialNumber: 0000:00:12.2
[ 0.820476] usb usb3: configuration #1 chosen from 1 choice
[ 0.820495] hub 3-0:1.0: USB hub found
[ 0.820499] hub 3-0:1.0: 5 ports detected
[ 0.820538] ahci 0000:00:11.0: version 3.0
[ 0.820544] alloc irq_desc for 19 on node -1
[ 0.820545] alloc kstat_irqs on node -1
[ 0.820549] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.820629] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.820631] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.820844] scsi0 : ahci
[ 0.820912] scsi1 : ahci
[ 0.820960] scsi2 : ahci
[ 0.821002] scsi3 : ahci
[ 0.821046] scsi4 : ahci
[ 0.821089] scsi5 : ahci
[ 0.821122] ata1: SATA max UDMA/133 irq 19, PHY RDY changed
[ 0.821124] ata2: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107180 irq 19
[ 0.821126] ata3: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107200 irq 19
[ 0.821128] ata4: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107280 irq 19
[ 0.821130] ata5: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107300 irq 19
[ 0.821132] ata6: SATA max UDMA/133 abar m1024@0xf4107000 port 0xf4107380 irq 19
[ 0.821154] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.821164] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.821171] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.821185] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf4104000
[ 0.880391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.880393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880395] usb usb4: Product: OHCI Host Controller
[ 0.880411] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.880412] usb usb4: SerialNumber: 0000:00:13.0
[ 0.880457] usb usb4: configuration #1 chosen from 1 choice
[ 0.880473] hub 4-0:1.0: USB hub found
[ 0.880479] hub 4-0:1.0: 5 ports detected
[ 0.880521] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.880531] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.880537] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 0.880545] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 0.880560] ehci_hcd 0000:00:13.2: debug port 1
[ 0.880569] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf4103000
[ 0.892360] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.892372] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.892373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.892374] usb usb5: Product: EHCI Host Controller
[ 0.892376] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.892377] usb usb5: SerialNumber: 0000:00:13.2
[ 0.892424] usb usb5: configuration #1 chosen from 1 choice
[ 0.892440] hub 5-0:1.0: USB hub found
[ 0.892444] hub 5-0:1.0: 5 ports detected
[ 0.892482] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.892493] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.892499] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 0.892511] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf4102000
[ 0.952414] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952416] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952417] usb usb6: Product: OHCI Host Controller
[ 0.952419] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.952420] usb usb6: SerialNumber: 0000:00:14.5
[ 0.952462] usb usb6: configuration #1 chosen from 1 choice
[ 0.952477] hub 6-0:1.0: USB hub found
[ 0.952483] hub 6-0:1.0: 2 ports detected
[ 0.952522] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.952533] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 0.952538] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 0.952546] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 0.952560] ehci_hcd 0000:00:16.2: debug port 1
[ 0.952569] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf4100000
[ 1.048024] usb 2-4: new low speed USB device using xhci_hcd and address 0
[ 1.060015] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.060027] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.060028] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060030] usb usb7: Product: EHCI Host Controller
[ 1.060031] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.060032] usb usb7: SerialNumber: 0000:00:16.2
[ 1.060077] usb usb7: configuration #1 chosen from 1 choice
[ 1.060092] hub 7-0:1.0: USB hub found
[ 1.060097] hub 7-0:1.0: 4 ports detected
[ 1.060134] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.060146] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.060152] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8
[ 1.060166] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf4101000
[ 1.088090] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.094080] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.099080] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.100090] usb 2-4: New USB device found, idVendor=046d, idProduct=c31d
[ 1.100092] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.100093] usb 2-4: Product: USB Keyboard
[ 1.100094] usb 2-4: Manufacturer: Logitech
[ 1.100137] usb 2-4: configuration #1 chosen from 1 choice
[ 1.100143] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.100146] usb 2-4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 1.107081] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.113080] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.119081] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.120233] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.120235] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120254] usb usb8: Product: OHCI Host Controller
[ 1.120255] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.120257] usb usb8: SerialNumber: 0000:00:16.0
[ 1.120306] usb usb8: configuration #1 chosen from 1 choice
[ 1.120325] hub 8-0:1.0: USB hub found
[ 1.120332] hub 8-0:1.0: 4 ports detected
[ 1.125208] usbcore: registered new interface driver hiddev
[ 1.132039] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.138225] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb2/2-4/2-4:1.0/input/input1
[ 1.138251] generic-usb 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-4/input0
[ 1.167084] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.170084] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.173094] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1.174147] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb2/2-4/2-4:1.1/input/input2
[ 1.174171] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-4/input1
[ 1.174185] usbcore: registered new interface driver usbhid
[ 1.174187] usbhid: v2.6:USB HID core driver
[ 1.296029] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.296032] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.297422] ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
[ 1.297424] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.299248] ata4.00: configured for UDMA/133
[ 1.299481] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS90, HN00S300, max UDMA/100
[ 1.300021] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.300866] ata5.00: configured for UDMA/100
[ 1.306437] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.306439] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.312903] ata2.00: configured for UDMA/133
[ 1.496010] usb 1-4: new full speed USB device using ohci_hcd and address 2
[ 1.524019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.524796] ata3.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133
[ 1.524797] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.525648] ata3.00: configured for UDMA/133
[ 1.668427] usb 1-4: New USB device found, idVendor=1532, idProduct=002f
[ 1.668429] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.668430] usb 1-4: Product: Razer Imperator
[ 1.668431] usb 1-4: Manufacturer: Razer
[ 1.668473] usb 1-4: configuration #1 chosen from 1 choice
[ 1.674531] input: Razer Razer Imperator as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4:1.0/input/input3
[ 1.674578] generic-usb 0003:1532:002F.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:12.0-4/input0
[ 1.690507] input: Razer Razer Imperator as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4:1.1/input/input4
[ 1.690534] generic-usb 0003:1532:002F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:12.0-4/input1

Below is the relevant part of dmesg after plugin an USB device on the USB
2 port, running on a kernel 2.6:

[ 57.488298] usb 2-4: USB disconnect, address 2
[ 63.316099] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 63.485227] usb 4-1: New USB device found, idVendor=046d, idProduct=c31d
[ 63.485233] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 63.485238] usb 4-1: Product: USB Keyboard
[ 63.485241] usb 4-1: Manufacturer: Logitech
[ 63.485363] usb 4-1: configuration #1 chosen from 1 choice
[ 63.498499] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input8
[ 63.498542] generic-usb 0003:046D:C31D.0005: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
[ 63.512360] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.1/input/input9
[ 63.512409] generic-usb 0003:046D:C31D.0006: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:13.0-1/input1


Let me know if you need more information.

Regards.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 586285100.112457122.1336384847947.JavaMail.root@zi mbra33-e6.priv.proxad.net">http://lists.debian.org/586285100.112457122.1336384847947.JavaMail.root@zi mbra33-e6.priv.proxad.net
 
Old 05-07-2012, 04:01 PM
Camaleón
 
Default AMD 990X/SB950 USB 2 controler not working on wheezy (kernel 3.2.X-amd64)

On Mon, 07 May 2012 12:00:47 +0200, dagecko wrote:

> When running the latest kernel from wheezy AMD 64, all USB 2 and 3
> controlers work. But when running the latest kernel 3.2.0-2-amd64 from
> wheezy amd64, only the usb 2 controlers do not work anymore. For
> information, the usb 3 controler is not from the same vendor.
>
> The USB 2 controlers are listed like this with lspci:

(...)

> Regarding the mainboard specs, the controler is an AMD SB950.
>
> Below is the relevant part from dmesg while booting on the kernel 3.2:

(keeping the interesting lines)

> [ 1.272856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.272876] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 1.272892] ehci_hcd 0000:00:12.2: EHCI Host Controller
> [ 1.272911] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
> [ 1.272919] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [ 1.272939] QUIRK: Enable AMD PLL fix

(...)

Okay, what "good" start :-P

Your USB 2.0 host controller is detected and the kernel kindly prints out
that "encouraing" message (seems like kernel developers want their users to
suffer trying to understand what that "quirk", "fix" and "dummy" exactly
means here >:-) ).

> Below is the relevant part of dmesg while trying to plug an USB device
> on such a controler while running a kernel 3.2:
>
> [ 163.484102] usb 7-1: new low-speed USB device number 6 using ohci_hcd
> [ 163.624100] usb 7-1: device descriptor read/64, error -32
> [ 163.868107] usb 7-1: device descriptor read/64, error -32

(...)

Are you attaching a USB 1.x device on a 2.0 high-speed port, right?

Have you tried with another kind of USB device (e.g., a USB key) instead?
Is there any change or are you still getting the same errors?

Anyway, check this:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=669894
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=649937#57

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: jo8rki$e2o$5@dough.gmane.org">http://lists.debian.org/jo8rki$e2o$5@dough.gmane.org
 

Thread Tools




All times are GMT. The time now is 04:57 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org