Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian User (http://www.linux-archive.org/debian-user/)
-   -   Darkice y Icecast2 en radio no se oye (http://www.linux-archive.org/debian-user/583977-darkice-y-icecast2-en-radio-no-se-oye.html)

10-05-2011 04:58 PM

Darkice y Icecast2 en radio no se oye
 
Hello

I installed and configured so far and Icecast2 darkice with ALSA

The two say they are running well but when I try in my PC or another
simply says you are playing but no sound

What can happen??

Use squeeze Debian

My configuration files and s as follows:

darkice.cfg
-----------

[general]
duration = 0
bufferSecs = 10
reconnect = yes

[input]
device = hw:0,0
sampleRate = 44100
bitsPerSample = 16
channel = 2

[icecast2-0]
bitrateMode = cbr
format = vorbis
bitrate = 96
server = 192.168.23.11

port = 9990
password = hackme
mountPoint = radio.ogg
name = radio

description = Radio en red LAN

url = http://inf.zav.co.cu

genre = varios
public = yes


icecast2.xml
------------

<icecast>
<limits>
<clients>100</clients>
<sources>5</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- If enabled, this will provide a burst of data when a client
first connects, thereby significantly reducing the startup
time for listeners that do substantial buffering. However,
it also significantly increases latency between the source
client and listening client. For low-latency setups, you
might want to disable this. -->
<burst-on-connect>1</burst-on-connect>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints -->
<burst-size>65535</burst-size>
</limits>

<authentication>
<!-- Sources log in with username 'source' -->
<source-password>hackme</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>hackme</relay-password>

<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>hackme</admin-password>
</authentication>

<!-- set the mountpoint for a shoutcast source to use, the default if not
specified is /stream but you can change it here if an alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->

<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->

<!-- This is the hostname other people will use to connect to your
server.
It affects mainly the urls generated by Icecast for playlists and yp
listings. -->
<hostname>inf.zav.co.cu</hostname>

<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>9990</port>
<!-- <bind-address>192.168.23.11</bind-address> -->
<!-- <shoutcast-mount>/radio</shoutcast-mount> -->
</listen-socket>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->

<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->

<!-- setting this makes all relays on-demand unless overridden, this is
useful for master relays which do not have <relay> definitions here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->

<!--
<relay>
<server>192.168.23.11</server>
<port>8001</port>
<mount>/radio.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>0</on-demand>

<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->

<!-- Only define a <mount> section if you want to use advanced options,
like alternative usernames or passwords
<mount>
<mount-name>/example-complex.ogg</mount-name>

<username>othersource</username>
<password>hackmemore</password>

<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/example_intro.ogg</intro>
<hidden>1</hidden>
<no-yp>1</no-yp>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>

<mount>
<mount-name>/auth_example.ogg</mount-name>
<authentication type="url">
<option name="mount_add"
value="http://myauthserver.net/notify_mount.php"/>
<option name="mount_remove"
value="http://myauthserver.net/notify_mount.php"/>
<option name="listener_add"
value="http://myauthserver.net/notify_listener.php"/>
<option name="listener_remove"
value="http://myauthserver.net/notify_listener.php"/>
</authentication>
</mount>

-->

<fileserve>1</fileserve>

<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>/usr/share/icecast2</basedir>

<!-- Note that if <chroot> is turned on below, these paths must both
be relative to the new root, not the original root -->
<logdir>/var/log/icecast2</logdir>
<webroot>/usr/share/icecast2/web</webroot>
<adminroot>/usr/share/icecast2/admin</adminroot>
<!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->

<!-- Aliases: treat requests for 'source' path as being for 'dest'
path
May be made specific to a port or bound address using the "port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" dest="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for
http://server:port/ to
the status page
-->
<alias source="/" dest="/status.xsl"/>
</paths>

<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<!-- <playlistlog>playlist.log</playlistlog> -->
<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error
-->
<logsize>10000</logsize> <!-- Max size of a logfile -->
<!-- If logarchive is enabled (1), then when logsize is reached
the logfile will be moved to
[error|access|playlist].log.DATESTAMP,
otherwise it will be moved to [error|access|playlist].log.old.
Default is non-archive mode (i.e. overwrite)
-->
<!-- <logarchive>1</logarchive> -->
</logging>

<security>
<chroot>0</chroot>
<!--
<changeowner>
<user>nobody</user>
<group>nogroup</group>
</changeowner>
-->
</security>
</icecast>





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: b1156e1b72d5e7c107ae0dccb0008f46.squirrel@sax.esid .gecgr.co.cu">http://lists.debian.org/b1156e1b72d5e7c107ae0dccb0008f46.squirrel@sax.esid .gecgr.co.cu

10-05-2011 04:58 PM

Darkice y Icecast2 en radio no se oye
 
Hello

I installed and configured so far and Icecast2 darkice with ALSA

The two say they are running well but when I try in my PC or another
simply says you are playing but no sound

What can happen??

Use squeeze Debian

My configuration files and s as follows:

darkice.cfg
-----------

[general]
duration = 0
bufferSecs = 10
reconnect = yes

[input]
device = hw:0,0
sampleRate = 44100
bitsPerSample = 16
channel = 2

[icecast2-0]
bitrateMode = cbr
format = vorbis
bitrate = 96
server = 192.168.23.11

port = 9990
password = hackme
mountPoint = radio.ogg
name = radio

description = Radio en red LAN

url = http://inf.zav.co.cu

genre = varios
public = yes


icecast2.xml
------------

<icecast>
<limits>
<clients>100</clients>
<sources>5</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- If enabled, this will provide a burst of data when a client
first connects, thereby significantly reducing the startup
time for listeners that do substantial buffering. However,
it also significantly increases latency between the source
client and listening client. For low-latency setups, you
might want to disable this. -->
<burst-on-connect>1</burst-on-connect>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints -->
<burst-size>65535</burst-size>
</limits>

<authentication>
<!-- Sources log in with username 'source' -->
<source-password>hackme</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>hackme</relay-password>

<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>hackme</admin-password>
</authentication>

<!-- set the mountpoint for a shoutcast source to use, the default if not
specified is /stream but you can change it here if an alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->

<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->

<!-- This is the hostname other people will use to connect to your
server.
It affects mainly the urls generated by Icecast for playlists and yp
listings. -->
<hostname>inf.zav.co.cu</hostname>

<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>9990</port>
<!-- <bind-address>192.168.23.11</bind-address> -->
<!-- <shoutcast-mount>/radio</shoutcast-mount> -->
</listen-socket>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->

<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->

<!-- setting this makes all relays on-demand unless overridden, this is
useful for master relays which do not have <relay> definitions here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->

<!--
<relay>
<server>192.168.23.11</server>
<port>8001</port>
<mount>/radio.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>0</on-demand>

<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->

<!-- Only define a <mount> section if you want to use advanced options,
like alternative usernames or passwords
<mount>
<mount-name>/example-complex.ogg</mount-name>

<username>othersource</username>
<password>hackmemore</password>

<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/example_intro.ogg</intro>
<hidden>1</hidden>
<no-yp>1</no-yp>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>

<mount>
<mount-name>/auth_example.ogg</mount-name>
<authentication type="url">
<option name="mount_add"
value="http://myauthserver.net/notify_mount.php"/>
<option name="mount_remove"
value="http://myauthserver.net/notify_mount.php"/>
<option name="listener_add"
value="http://myauthserver.net/notify_listener.php"/>
<option name="listener_remove"
value="http://myauthserver.net/notify_listener.php"/>
</authentication>
</mount>

-->

<fileserve>1</fileserve>

<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>/usr/share/icecast2</basedir>

<!-- Note that if <chroot> is turned on below, these paths must both
be relative to the new root, not the original root -->
<logdir>/var/log/icecast2</logdir>
<webroot>/usr/share/icecast2/web</webroot>
<adminroot>/usr/share/icecast2/admin</adminroot>
<!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->

<!-- Aliases: treat requests for 'source' path as being for 'dest'
path
May be made specific to a port or bound address using the "port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" dest="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for
http://server:port/ to
the status page
-->
<alias source="/" dest="/status.xsl"/>
</paths>

<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<!-- <playlistlog>playlist.log</playlistlog> -->
<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error
-->
<logsize>10000</logsize> <!-- Max size of a logfile -->
<!-- If logarchive is enabled (1), then when logsize is reached
the logfile will be moved to
[error|access|playlist].log.DATESTAMP,
otherwise it will be moved to [error|access|playlist].log.old.
Default is non-archive mode (i.e. overwrite)
-->
<!-- <logarchive>1</logarchive> -->
</logging>

<security>
<chroot>0</chroot>
<!--
<changeowner>
<user>nobody</user>
<group>nogroup</group>
</changeowner>
-->
</security>
</icecast>





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: b1156e1b72d5e7c107ae0dccb0008f46.squirrel@sax.esid .gecgr.co.cu">http://lists.debian.org/b1156e1b72d5e7c107ae0dccb0008f46.squirrel@sax.esid .gecgr.co.cu


All times are GMT. The time now is 07:13 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.