OFF-TOPIC: HTML to send data out a certain port
Yes, off-topic, but you folks are the brightest group with which I'm
We're thinking of building a Debian-based web-server that offers up a
"remote control" interface for a smart classroom in a university. We
want a web interface so it'll be universal (particularly working with
mobile devices such as smartphones, iPads, etc.). This web interface
would allow the the teacher to control the various multimedia devices in
the room (projector, volume on the sound system, doc-cam, DVD player,
etc) just by bringing up the web site on his Android phone, etc, and
clicking hyperlink-type buttons. In this way he can power up the
projector, tell the projector to show the signal from the laptop port in
the podium or to switch to the image from the document camera, crank up
the sound system volume, dim the room lights, etc.
In order to do this, we have to convert the web clicks into infrared
signals going to the various IR-enabled devices, essentially replacing
the remote controls that came with the devices.
Global Cache (http://www.globalcache.com/products/itach/models2/) has
devices that, as I understand it, will send out the various IR signals
to the various devices, based on ASCII commands sent to it via a
My problem is how to convert a click on a web page into the proper code
to be sent over the wireless network to the Global Cache device. I don't
have the Global Cache yet to play with, but I'm trying to get a feel for
how to do things before we start spending money. The API documentation
from their web site indicates it's a matter of just sending the correct
ASCII sequence out the web server's TCP socket on Port 4998.
Here's a snippet from their documentation that might help set some
Commands are initiated by short ASCII string representing the command
type. Typically, physical address and data information will follow.
The structures of iTach commands are described in the following
sections. Text enclosed in brackets (<text>) must be substituted by
its ASCII definition. Multiple ASCII choices are divided by separator
( | ) characters.
Note: Commands are case sensitive.
Example: The network settings are queried with the get_NET command:
<connectoraddress> is 0:1 (network module address)
The command ASCII string sent to the iTach is:
Note: get_NET command is documented fully in section 5.1 below.
Can anyone provide me a snippet of HTML (and/or related, such as php,
etc) code for sending an ASCII string (such as the above "net_NET,0:1
<CR>") to TCP socket Port 4998?
Better yet, can anyone also provide me a means of testing if I'm sending
to that port without yet having the hardware in-hand? Like, if I manage
to send data to port 4998, how do I know I sent it and what it looks
like on the other side?
And is this called "raw socket programming", or what? If I knew what
terms to google for, I might not need to bother y'all any more.
Praise Yah! o/
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact email@example.com
|All times are GMT. The time now is 01:36 PM.|
VBulletin, Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.