Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian User (http://www.linux-archive.org/debian-user/)
-   -   wrestling with xrandr (http://www.linux-archive.org/debian-user/582178-wrestling-xrandr.html)

Harry Putnam 09-30-2011 09:54 PM

wrestling with xrandr
 
I've spent a couple of fun hours trying to understand how xrandr
works. How to come up with a command that will do what I want done.

Its quite a complex tool and there are volumes written about how to
use it. Even some examples in the manpage. However... I have not
understood very much of it. No doubt due to a deep seated stupidity.

I finally just resorted to trying any commands from the manpage or
google that seemed to be about my objective.

My objective is to have a panning desktop. That is, a size that is
larger than my monitor by a fair bit.

After tinkering exessively, I'm no nearer to having that panning
desktop than before, although I've created some interesting setups and
very odd setups.

It would seem that a command like this:

xrandr --output DVI-I-1 --panning 2880x1800
or maybe this:
xrandr --fb 1024x768 --output DVI-I-1 --panning 3600x2250

would come pretty close.

Both of those change the screen a small amount just enough for the
mouse pointer to disappear at any border but only just barely.
I want a lot more panning than that. But I'll be darned if I can
really follow how this is supposed to work... I'm sure there is some
tried and true way to do this.

Of the dozens of other combinations I've tried some give an error
like:

,----
| X Error of failed request: BadMatch (invalid parameter attributes)
| Major opcode of failed request: 150 (RANDR)
| Minor opcode of failed request: 29 (RRSetPanning)
| Serial number of failed request: 30
| Current serial number in output stream: 30
| HOST:reader ~
`----

Words like `BadMatch' would seem to indicate there is some way to
arrive at (mathmatically) parameters that are not a BadMatch. But I
am not getting it.

I have high hopes that someone here will know how it is done or at
least be able to put me on the right track.

It all starts with the command `xrandr' <by itself> to show what mode
the screen is currently at and what the output device name is so I'm
inlining that output below along with the output of xwininfo: But
first a little equipment info:

Machine: (custom older) Celeron single core 3.02 Ghz
2 GB Ram
Video Card: MSI Nvidia FX 5700LE 256m ram
Monitor: Asus 25.5 inch LCD
native resolution: 1900 x 1280

------- --------- ---=--- --------- --------
Xrandr output

xrandr

Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 550mm x 340mm
1280x1024 75.0 60.0
1440x900 59.9*
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
TV-1 connected 720x576+1440+0 (normal left inverted right x axis y axis) 0mm x 0mm
720x576 50.0*+
1024x768 50.0
800x600 50.0
720x480 50.0
640x480 50.0
400x300 100.0
320x240 100.0
320x200 100.0
------- --------- ---=--- --------- --------

xwininfo output:

xwininfo: Window id: 0x140001d "x-nautilus-desktop"

Absolute upper-left X: 0
Absolute upper-left Y: 0
Relative upper-left X: 0
Relative upper-left Y: 0
Width: 2160
Height: 900
Depth: 24
Visual: 0x21
Visual Class: TrueColor
Border width: 0
Class: InputOutput
Colormap: 0x20 (installed)
Bit Gravity State: NorthWestGravity
Window Gravity State: NorthWestGravity
Backing Store State: NotUseful
Save Under State: no
Map State: IsViewable
Override Redirect State: no
Corners: +0+0 -0+0 -0-0 +0-0
-geometry 2160x900+0+0


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87y5x566i3.fsf@newsguy.com">http://lists.debian.org/87y5x566i3.fsf@newsguy.com

Scott Ferguson 10-01-2011 04:21 AM

wrestling with xrandr
 
On 01/10/11 07:54, Harry Putnam wrote:

<snipped>

> My objective is to have a panning desktop. That is, a size that is
> larger than my monitor by a fair bit.
>
> After tinkering exessively, I'm no nearer to having that panning
> desktop than before, although I've created some interesting setups and
> very odd setups.

I'm not sure that's advisable.... but it 'should' be OK.
Caveat: Keith Packard is a brilliant programmer, but I don't think you
can expect a refund if you manage to screw a card or display ;-p

>
> It would seem that a command like this:
>
> xrandr --output DVI-I-1 --panning 2880x1800

Yes - it's the basis of the correct parameters - best to determine
requirements and device capabilities. See further down this post.

<snipped>

Hence my "do not use" "example" :-)

NOTE: sending new emails using the same subject breaks the thread and
makes it difficult to re-read all the posts trying to get all the
relevant information.

What Debian release are you running?
$ cat /etc/issue

<snipped>

> It all starts with the command `xrandr' <by itself>

Should be:-
# xrandr -q

(or # "xrandr -q --verbose")

<snipped>

> Machine: (custom older) Celeron single core 3.02 Ghz
> 2 GB Ram
> Video Card: MSI Nvidia FX 5700LE 256m ram
> Monitor: Asus 25.5 inch LCD
> native resolution: 1900 x 1280

Thankyou.

>
> ------- --------- ---=--- --------- --------
> Xrandr output
>
> xrandr
>
> Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
> VGA-1 disconnected (normal left inverted right x axis y axis)


^^ Do you use VGA out?
If so please provide monitor/display information.



> DVI-I-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 550mm x 340mm
> 1280x1024 75.0 60.0
> 1440x900 59.9*
<snipped>

Do you want 1440x900 resolution?



> TV-1 connected 720x576+1440+0 (normal left inverted right x axis y axis) 0mm x 0mm
> 720x576 50.0*+
> 1024x768 50.0
<snipped>
Are you happy with only 720x576 resolution on the TV-out?
1024x768 is possible.


>
> xwininfo output:
>
> xwininfo: Window id: 0x140001d "x-nautilus-desktop"
>
<snipped>

You wanted 2048x1536 for panning - I'm not certain that's possible
without losing accelerated 3D and reduced colour depth. I also don't
know you card, so can't advise as to it's ability to do DVI and VGA and
TV simultaneously.

What do you get from:-
$ cvt -v 1440 900
$ cvt -v 1680 1050
$ cvt -v 2048 1536
# get-edid | parse-edid


You may need to install read-edid (for get-edid and parse-edid).
cvt is part of xserver-xorg-core.

When you post the missing information I should be able to give you the
xrandr parameters you need. If you are in a hurry - "man xrandr" and
"man X" are good places to find relevant information.

Cheers


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E86955F.5040705@gmail.com">http://lists.debian.org/4E86955F.5040705@gmail.com

Harry Putnam 10-01-2011 03:47 PM

wrestling with xrandr
 
Scott Ferguson <prettyfly.productions@gmail.com> writes:

NOTE: Correction to monitor native resolution posted in OP
Native resolution: 1920 x 1200 (I previously said 1900x1280)

[...]

> What Debian release are you running?
> $ cat /etc/issue

Debian GNU/Linux wheezy/sid

(Installed from new 11.4 install disc (the small one))

> <snipped>
>
>> It all starts with the command `xrandr' <by itself>
>
> Should be:-
> # xrandr -q
>
> (or # "xrandr -q --verbose")

xrandr -q --verbose is inlined at the end ... thanks.

[...]

>> Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
>> VGA-1 disconnected (normal left inverted right x axis y axis)
>
>
> ^^ Do you use VGA out?
> If so please provide monitor/display information.

No


>
>> DVI-I-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 550mm x 340mm
>> 1280x1024 75.0 60.0
>> 1440x900 59.9*
> <snipped>
>
> Do you want 1440x900 resolution?

I don't really know what I want yet... My old xorg.conf setting was on
a 17.5 inch crt... now I'm on a 25.5 inch lcd.

Fonts look pretty terrible with the current settings... Actually it
looks worse that it did on the crt.

>> TV-1 connected 720x576+1440+0 (normal left inverted right x axis y axis) 0mm x 0mm
>> 720x576 50.0*+
>> 1024x768 50.0
> <snipped>
> Are you happy with only 720x576 resolution on the TV-out?
> 1024x768 is possible.

No TV is done on this monitor But I'd still like to know how to get
1024x768.

[...]

> You wanted 2048x1536 for panning - I'm not certain that's possible
> without losing accelerated 3D and reduced colour depth. I also don't
> know you card, so can't advise as to it's ability to do DVI and VGA and
> TV simultaneously.

As I mentioned above that 2048x1536 is from xorg.conf that was being
used on a 17.5 in crt... so now I'm not sure what it would have to be
to allow plenty of planning on a 25.5 screen. This monitor has a
maximum resolution of 1920 x 1200

> What do you get from:-
> $ cvt -v 1440 900
> $ cvt -v 1680 1050
> $ cvt -v 2048 1536
> # get-edid | parse-edid

cvt -v 1440 900
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync


cvt -v 1680 1050
# 1680x1050 59.95 Hz (CVT 1.76MA) hsync: 65.29 kHz; pclk: 146.25 MHz
Modeline "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

cvt -v 2048 1536
# 2048x1536 59.95 Hz (CVT 3.15M3) hsync: 95.45 kHz; pclk: 267.25 MHz
Modeline "2048x1536_60.00" 267.25 2048 2208 2424 2800 1536 1539 1543 1592 -hsync +vsync

------- --------- ---=--- --------- --------
------- --------- ---=--- --------- --------

sudo get-edid | parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0

Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful

VBE version 300
VBE string at 0x2110 "NVIDIA"

VBE/DDC service about to be called
Report DDC capabilities

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful

Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
Read EDID

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed

The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
parse-edid: IO error reading EDID

------- --------- ---=--- --------- --------
------- --------- ---=--- --------- --------

xrandr -q --verbose
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x91
Timestamp: 17094468
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
DVI-I-1 connected 1440x900+0+0 (0x96) normal (normal left inverted right x axis y axis) 550mm x 340mm
Identifier: 0x92
Timestamp: 17094468
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000469a4263a490000
1f140103803722782acbd0a35a49a024
135054bfef00714f0101814081809500
b30001010101283c80a070b023403020
360026542100001a000000ff0041384c
4d54463031383734360a000000fd0032
4b1e5511000a202020202020000000fc
0041535553205657323636480a2000b2
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1280x1024 (0x94) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x95) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x96) 106.5MHz -HSync +VSync *current
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x97) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1152x864 (0x98) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1024x768 (0x99) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x9a) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x9b) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x9c) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x9d) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x9e) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x9f) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0xa0) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0xa1) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0xa2) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0xa3) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0xa4) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0xa5) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
TV-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x93
Timestamp: 17094468
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
overscan: 50 (0x00000032) range: (0,100)
hue: 0 (0x00000000) range: (0,100)
saturation: 50 (0x00000032) range: (0,100)
flicker reduction: 50 (0x00000032) range: (0,100)
mode: PAL
supported: PAL PAL-M PAL-N PAL-Nc
NTSC-M NTSC-J
subconnector: Unknown
supported: Unknown Composite SVIDEO Component
SCART
select subconnector: Automatic
supported: Automatic Composite SVIDEO Component
SCART


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87sjncogs1.fsf@newsguy.com">http://lists.debian.org/87sjncogs1.fsf@newsguy.com

Lisi 10-01-2011 07:18 PM

wrestling with xrandr
 
On Saturday 01 October 2011 16:47:26 Harry Putnam wrote:
> Debian GNU/Linux wheezy/sid
>
> (Installed from new 11.4 install disc (the small one))

11.4??? Wheezy hasn't got a number yet, and Squeeze is 6.0. So do you in
fact mean Ubuntu? And if so, where does the wheezy/sid come from? Or am I
in severe need of some sleep?? (A very possible explanation!)

Lisi


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201110012018.02972.lisi.reisz@gmail.com">http://lists.debian.org/201110012018.02972.lisi.reisz@gmail.com

Harry Putnam 10-01-2011 08:09 PM

wrestling with xrandr
 
Lisi <lisi.reisz@gmail.com> writes:

> On Saturday 01 October 2011 16:47:26 Harry Putnam wrote:
>> Debian GNU/Linux wheezy/sid
>>
>> (Installed from new 11.4 install disc (the small one))
>
> 11.4??? Wheezy hasn't got a number yet, and Squeeze is 6.0. So do you in
> fact mean Ubuntu? And if so, where does the wheezy/sid come from? Or am I
> in severe need of some sleep?? (A very possible explanation!)
>
Yikes... sorry. I was dinking around with the latest ubuntu around
the same time... I confused the the two. I downloaded the latest
installed ISO for debian.

Its debian alright and captureing a cat /etc/issue here:

Debian GNU/Linux wheezy/sid
l




--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87wrcoxymj.fsf@newsguy.com">http://lists.debian.org/87wrcoxymj.fsf@newsguy.com

Scott Ferguson 10-02-2011 04:04 AM

wrestling with xrandr
 
On 02/10/11 01:47, Harry Putnam wrote:
> Scott Ferguson <prettyfly.productions@gmail.com> writes:
>
> NOTE: Correction to monitor native resolution posted in OP Native
> resolution: 1920 x 1200 (I previously said 1900x1280)

Thanks.
It would be appreciated, greatly, if you could use "Reply" to continue a
thread - saves searching through lots of posts in order to patch
together all the needed information.

>
> [...]
>
>> What Debian release are you running? $ cat /etc/issue
>
> Debian GNU/Linux wheezy/sid

OK. You must be mixing sources (hopefully with judicious pinning).

>
> (Installed from new 11.4 install disc (the small one))

Lisi's question and your response is noted.

>
>> <snipped>

>
>>> Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x
>>> 4096 VGA-1 disconnected (normal left inverted right x axis y
>>> axis)
>>
>>
>> ^^ Do you use VGA out? If so please provide monitor/display
>> information.
>
> No

Thanks

>
>
>>
>>> DVI-I-1

Note: ^ that "output" name is determined by the manufacturer of your
video card (another reason I didn't supply a working example -
insufficient information about your system).


>>> connected 1440x900+0+0 (normal left inverted right x axis y axis)
>>> 550mm x 340mm 1280x1024 75.0 60.0 1440x900 59.9*
>> <snipped>
>>
>> Do you want 1440x900 resolution?
>
> I don't really know what I want yet... My old xorg.conf setting was
> on a 17.5 inch crt... now I'm on a 25.5 inch lcd.
>
> Fonts look pretty terrible with the current settings... Actually it
> looks worse that it did on the crt.

Your CRT monitor was a different aspect ratio - less width, similar height.
Your current, default, resolution is 1440x900 - anything higher will
either require custom >100dpi font settings (or a telescope) in order to
read small fonts.

I'm assuming you know that a bigger screen means smaller fonts? Some
people find that counter-intuitive...
What fonts do you use and what DPI do you have set?
Do you have antialiasing and subpixel hinting enabled? If not, then
enable them.


>
>>> TV-1 connected 720x576+1440+0 (normal left inverted right x axis
>>> y axis) 0mm x 0mm 720x576 50.0*+ 1024x768 50.0
>> <snipped> Are you happy with only 720x576 resolution on the
>> TV-out? 1024x768 is possible.
>
> No TV is done on this monitor

xrandr is just reporting what resolutions are available for TV-out
connection - not whether what is connected is a television, or whether
TV is piped to that display (or from).
TV-out is just an analogue output designed originally for the old
analogue CRT type television sets (with S-video/SCART/VGA inputs)

> But I'd still like to know how to get 1024x768.

I'll add it to the xrandr command.

>
> [...]
>
>> You wanted 2048x1536 for panning - I'm not certain that's possible
>> without losing accelerated 3D and reduced colour depth. I also
>> don't know you card, so can't advise as to it's ability to do DVI
>> and VGA and TV simultaneously.
>
> As I mentioned above that 2048x1536 is from xorg.conf that was being
> used on a 17.5 in crt... so now I'm not sure what it would have to
> be to allow plenty of planning on a 25.5 screen. This monitor has a
> maximum resolution of 1920 x 1200

Noted.
I'd suggest using the current default resolution (1440x900) and a
panning resolution of 1680x1050 (saves scaling problems)


>
>> What do you get from:- $ cvt -v 1440 900 $ cvt -v 1680 1050 $ cvt
<snipped>

Thankyou.
We have some identical displays - but not video cards, that information
gives me an idea what your card is capable of.

Brian has pointed a bug report that might be relevant. I believe the
scaling problem is still outstanding - but (with new mode creation)
panning is definitely not a problem with nouveau (I use it on my
netbooks). I don't know about Testing though (and can't test it this
weekend).

Which video driver are you using?
(eg. nouveau, debian nvidia, or, proprietary nvidia).

I'll test it tomorrow (when the weekend guests depart) and post the results.

Cheers


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E87E2E1.5060406@gmail.com">http://lists.debian.org/4E87E2E1.5060406@gmail.com

Ralf Jung 10-02-2011 09:46 AM

wrestling with xrandr
 
Hi,

> > [...]
> >
> >> What Debian release are you running? $ cat /etc/issue
> >
> > Debian GNU/Linux wheezy/sid
>
> OK. You must be mixing sources (hopefully with judicious pinning).
Are you sure?

$ cat /etc/issue
Debian GNU/Linux wheezy/sid
l

And I definitely do not have any packages installed from unstable or
experimental...

Kind regards,
Ralf


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201110021146.30761.ralfjung-e@gmx.de">http://lists.debian.org/201110021146.30761.ralfjung-e@gmx.de

Harry Putnam 10-02-2011 12:46 PM

wrestling with xrandr
 
Scott Ferguson <prettyfly.productions@gmail.com> writes:

> On 02/10/11 01:47, Harry Putnam wrote:
>> Scott Ferguson <prettyfly.productions@gmail.com> writes:
>>
>> NOTE: Correction to monitor native resolution posted in OP Native
>> resolution: 1920 x 1200 (I previously said 1900x1280)
>
> Thanks.
> It would be appreciated, greatly, if you could use "Reply" to continue a
> thread - saves searching through lots of posts in order to patch
> together all the needed information.

I'm not sure what problem you are having with threading. Your previous
reply that I responded to (the response you are quoting here) has the
Reference header in the full headers that show it was a response to
your prior post:
Message-ID: <4E86955F.5040705@gmail.com>

My post that you quote here has References header:
References: <87y5x566i3.fsf@newsguy.com> <4E86955F.5040705@gmail.com>

Note your message-ID there. That indicates the post you quote here
was a response to your message-id: <4E86955F.5040705@gmail.com>.

That is, it is exactly as it should be. What do you read with?.
For me this thread is normally threaded. (I use emacs/gnus)

>>
>> [...]
>>
>>> What Debian release are you running? $ cat /etc/issue
>>
>> Debian GNU/Linux wheezy/sid
>
> OK. You must be mixing sources (hopefully with judicious pinning).

No, not mixing.

[...]

>>>> DVI-I-1
>
> Note: ^ that "output" name is determined by the manufacturer of your
> video card (another reason I didn't supply a working example -
> insufficient information about your system).

Yes, you've mentioned that several times now... I've tried to include
as much as I was asked for... sorry if it did not meet expectations.

> I'm assuming you know that a bigger screen means smaller fonts? Some
> people find that counter-intuitive...
> What fonts do you use and what DPI do you have set?
> Do you have antialiasing and subpixel hinting enabled? If not, then
> enable them.

Yes I know they would be smaller... that is what I'd like to see.
I'm using the standard fonts that are installed with xorg and gnome
desktop. I'm not using the gnome desktop. I use fluxbox, but I
believe the same fonts are used.

I'm not really sure what drivers are being used. T think it is
Nouvea. I see that mentioned in Xorg.log, and have included Xorg.log
at the end. Several modules are mentioned. I'm not sure how to
interpret all that. I see several modules loaded. There is probably
some handier way to get the information but I don't know it.

I've fired up gnome desktop and have this information from
Settings/Appearance fonts tab:

Application font: sans 7
Document font: sans 7
desktop: sans 7
Window title: Sans Bold 8
Fixed width monospace 9

Monochrom [], Best contrast [], Best shapes [] and Subpixel smoothing [x]

I have Subpixel Smoothing turned on as you see above, but honestly I
see no differnce no matter which of those I select.

The `details' button shows 96dpi

>>
>>>> TV-1 connected 720x576+1440+0 (normal left inverted right x axis
>>>> y axis) 0mm x 0mm 720x576 50.0*+ 1024x768 50.0
>>> <snipped> Are you happy with only 720x576 resolution on the
>>> TV-out? 1024x768 is possible.
>>
>> No TV is done on this monitor
>
> xrandr is just reporting what resolutions are available for TV-out
> connection - not whether what is connected is a television, or whether
> TV is piped to that display (or from).
> TV-out is just an analogue output designed originally for the old
> analogue CRT type television sets (with S-video/SCART/VGA inputs)
>
>> But I'd still like to know how to get 1024x768.
>
> I'll add it to the xrandr command.

>> [...]
>>
>>> You wanted 2048x1536 for panning - I'm not certain that's possible
>>> without losing accelerated 3D and reduced colour depth. I also
>>> don't know you card, so can't advise as to it's ability to do DVI
>>> and VGA and TV simultaneously.
>>
>> As I mentioned above that 2048x1536 is from xorg.conf that was being
>> used on a 17.5 in crt... so now I'm not sure what it would have to
>> be to allow plenty of planning on a 25.5 screen. This monitor has a
>> maximum resolution of 1920 x 1200
>
> Noted.
> I'd suggest using the current default resolution (1440x900) and a
> panning resolution of 1680x1050 (saves scaling problems)

Thanks for the tip. But I'm not sure what the command syntax would
be. I'm guessing:

xrandr --fb 1440x900 --output DVI-I-1 --panning 1680x1050

If that is it, then it fails here:
xrandr --fb 1440x900 --output DVI-I-1 --panning 1680x1050
xrandr: specified screen 1440x900 not large enough for output TV-1 (720x576+1440+0)
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 29 (RRSetPanning)
Serial number of failed request: 32
Current serial number in output stream: 32

I'm not sure how to change the TV setting. Or even if it can be
changed to accommodate that command.


Trying:
xrandr --output DVI-I-1 --panning 1680x1050

That shakes the screen a bit, and the mouse can now disappear slightly
at the edges, but as reported in the bug...it appears that panning is
being blocked.

As you've noted there is a bug that might prevent panning in any case.


> Brian has pointed a bug report that might be relevant. I believe the
> scaling problem is still outstanding - but (with new mode creation)
> panning is definitely not a problem with nouveau (I use it on my
> netbooks). I don't know about Testing though (and can't test it this
> weekend).

I didn't quite follow what you meant by "(with new mode creation)".

So you are able to do panning then? At least on a netbook.

I'll be glad to hear of any testing you may do latter on.

For me there is no urgency... but I'd like to get it setup eventually.

------- --------- ---=--- --------- --------
------- --------- ---=--- --------- --------
Xorg.log

[ 5163.573]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 5163.574] X Protocol Version 11, Revision 0
[ 5163.574] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 5163.574] Current Operating System: Linux reader 3.0.0-1-686-pae #1 SMP Sat Aug 27 16:41:03 UTC 2011 i686
[ 5163.574] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-1-686-pae root=UUID=83a94f1d-e6e6-432e-86ad-b24754755fff ro quiet splash
[ 5163.574] Build Date: 24 September 2011 10:02:42AM
[ 5163.574] xorg-server 2:1.11.1-1 (Cyril Brulebois <kibi@debian.org>)
[ 5163.574] Current version of pixman: 0.22.2
[ 5163.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5163.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5163.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 2 07:12:54 2011
[ 5163.574] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5163.575] (==) No Layout section. Using the first Screen section.
[ 5163.575] (==) No screen section available. Using defaults.
[ 5163.575] (**) |-->Screen "Default Screen Section" (0)
[ 5163.575] (**) | |-->Monitor "<default monitor>"
[ 5163.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5163.575] (==) Automatically adding devices
[ 5163.575] (==) Automatically enabling devices
[ 5163.575] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5163.575] Entry deleted from font path.
[ 5163.575] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[ 5163.575] Entry deleted from font path.
[ 5163.576] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[ 5163.576] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 5163.576] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5163.576] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5163.576] (II) Loader magic: 0x822b800
[ 5163.576] (II) Module ABI versions:
[ 5163.576] X.Org ANSI C Emulation: 0.4
[ 5163.576] X.Org Video Driver: 11.0
[ 5163.576] X.Org XInput driver : 13.0
[ 5163.576] X.Org Server Extension : 6.0
[ 5163.577] (--) PCI:*(0:1:0:0) 10de:0343:1462:9590 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, BIOS @ 0x????????/131072
[ 5163.577] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5163.577] (II) LoadModule: "extmod"
[ 5163.578] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 5163.579] (II) Module extmod: vendor="X.Org Foundation"
[ 5163.579] compiled for 1.11.1, module version = 1.0.0
[ 5163.579] Module class: X.Org Server Extension
[ 5163.579] ABI class: X.Org Server Extension, version 6.0
[ 5163.579] (II) Loading extension SELinux
[ 5163.579] (II) Loading extension MIT-SCREEN-SAVER
[ 5163.579] (II) Loading extension XFree86-VidModeExtension
[ 5163.579] (II) Loading extension XFree86-DGA
[ 5163.579] (II) Loading extension DPMS
[ 5163.579] (II) Loading extension XVideo
[ 5163.579] (II) Loading extension XVideo-MotionCompensation
[ 5163.579] (II) Loading extension X-Resource
[ 5163.579] (II) LoadModule: "dbe"
[ 5163.579] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 5163.579] (II) Module dbe: vendor="X.Org Foundation"
[ 5163.579] compiled for 1.11.1, module version = 1.0.0
[ 5163.579] Module class: X.Org Server Extension
[ 5163.579] ABI class: X.Org Server Extension, version 6.0
[ 5163.579] (II) Loading extension DOUBLE-BUFFER
[ 5163.579] (II) LoadModule: "glx"
[ 5163.580] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5163.580] (II) Module glx: vendor="X.Org Foundation"
[ 5163.580] compiled for 1.11.1, module version = 1.0.0
[ 5163.580] ABI class: X.Org Server Extension, version 6.0
[ 5163.580] (==) AIGLX enabled
[ 5163.580] (II) Loading extension GLX
[ 5163.580] (II) LoadModule: "record"
[ 5163.580] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 5163.580] (II) Module record: vendor="X.Org Foundation"
[ 5163.581] compiled for 1.11.1, module version = 1.13.0
[ 5163.581] Module class: X.Org Server Extension
[ 5163.581] ABI class: X.Org Server Extension, version 6.0
[ 5163.581] (II) Loading extension RECORD
[ 5163.581] (II) LoadModule: "dri"
[ 5163.581] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5163.581] (II) Module dri: vendor="X.Org Foundation"
[ 5163.581] compiled for 1.11.1, module version = 1.0.0
[ 5163.581] ABI class: X.Org Server Extension, version 6.0
[ 5163.581] (II) Loading extension XFree86-DRI
[ 5163.581] (II) LoadModule: "dri2"
[ 5163.582] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5163.582] (II) Module dri2: vendor="X.Org Foundation"
[ 5163.582] compiled for 1.11.1, module version = 1.2.0
[ 5163.582] ABI class: X.Org Server Extension, version 6.0
[ 5163.582] (II) Loading extension DRI2
[ 5163.582] (==) Matched nouveau as autoconfigured driver 0
[ 5163.582] (==) Matched nv as autoconfigured driver 1
[ 5163.582] (==) Matched vesa as autoconfigured driver 2
[ 5163.582] (==) Matched fbdev as autoconfigured driver 3
[ 5163.582] (==) Assigned the driver to the xf86ConfigLayout
[ 5163.582] (II) LoadModule: "nouveau"
[ 5163.582] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 5163.583] (II) Module nouveau: vendor="X.Org Foundation"
[ 5163.583] compiled for 1.11.0, module version = 0.0.16
[ 5163.583] Module class: X.Org Video Driver
[ 5163.583] ABI class: X.Org Video Driver, version 11.0
[ 5163.583] (II) LoadModule: "nv"
[ 5163.584] (WW) Warning, couldn't open module nv
[ 5163.584] (II) UnloadModule: "nv"
[ 5163.584] (II) Unloading nv
[ 5163.584] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5163.584] (II) LoadModule: "vesa"
[ 5163.584] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5163.584] (II) Module vesa: vendor="X.Org Foundation"
[ 5163.584] compiled for 1.11.0, module version = 2.3.0
[ 5163.584] Module class: X.Org Video Driver
[ 5163.584] ABI class: X.Org Video Driver, version 11.0
[ 5163.584] (II) LoadModule: "fbdev"
[ 5163.585] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5163.585] (II) Module fbdev: vendor="X.Org Foundation"
[ 5163.585] compiled for 1.11.0, module version = 0.4.2
[ 5163.585] ABI class: X.Org Video Driver, version 11.0
[ 5163.585] (II) NOUVEAU driver Date: Thu Mar 24 02:13:12 2011 +1000
[ 5163.585] (II) NOUVEAU driver for NVIDIA chipset families :
[ 5163.585] RIVA TNT (NV04)
[ 5163.585] RIVA TNT2 (NV05)
[ 5163.585] GeForce 256 (NV10)
[ 5163.585] GeForce 2 (NV11, NV15)
[ 5163.585] GeForce 4MX (NV17, NV18)
[ 5163.585] GeForce 3 (NV20)
[ 5163.585] GeForce 4Ti (NV25, NV28)
[ 5163.586] GeForce FX (NV3x)
[ 5163.586] GeForce 6 (NV4x)
[ 5163.586] GeForce 7 (G7x)
[ 5163.586] GeForce 8 (G8x)
[ 5163.586] GeForce GTX 200 (NVA0)
[ 5163.586] GeForce GTX 400 (NVC0)
[ 5163.586] (II) VESA: driver for VESA chipsets: vesa
[ 5163.586] (II) FBDEV: driver for framebuffer: fbdev
[ 5163.586] (++) using VT number 8

[ 5163.590] drmOpenDevice: node name is /dev/dri/card0
[ 5163.590] drmOpenDevice: open result is 8, (OK)
[ 5163.590] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 5163.590] drmOpenDevice: node name is /dev/dri/card0
[ 5163.590] drmOpenDevice: open result is 8, (OK)
[ 5163.590] drmOpenByBusid: drmOpenMinor returns 8
[ 5163.590] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 5163.590] (II) [drm] nouveau interface version: 0.0.16
[ 5163.591] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 5163.591] (WW) Falling back to old probe method for vesa
[ 5163.591] (WW) Falling back to old probe method for fbdev
[ 5163.591] (II) Loading sub module "fbdevhw"
[ 5163.591] (II) LoadModule: "fbdevhw"
[ 5163.591] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5163.591] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5163.591] compiled for 1.11.1, module version = 0.0.2
[ 5163.591] ABI class: X.Org Video Driver, version 11.0
[ 5163.591] (II) Loading sub module "dri"
[ 5163.592] (II) LoadModule: "dri"
[ 5163.592] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5163.592] (II) Module dri: vendor="X.Org Foundation"
[ 5163.592] compiled for 1.11.1, module version = 1.0.0
[ 5163.592] ABI class: X.Org Server Extension, version 6.0
[ 5163.592] (II) NOUVEAU(0): Loaded DRI module
[ 5163.592] drmOpenDevice: node name is /dev/dri/card0
[ 5163.592] drmOpenDevice: open result is 9, (OK)
[ 5163.592] drmOpenDevice: node name is /dev/dri/card0
[ 5163.592] drmOpenDevice: open result is 9, (OK)
[ 5163.592] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 5163.592] drmOpenDevice: node name is /dev/dri/card0
[ 5163.592] drmOpenDevice: open result is 9, (OK)
[ 5163.592] drmOpenByBusid: drmOpenMinor returns 9
[ 5163.592] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 5163.592] (II) [drm] DRM interface version 1.4
[ 5163.592] (II) [drm] DRM open master succeeded.
[ 5163.593] (--) NOUVEAU(0): Chipset: "NVIDIA NV36"
[ 5163.593] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5163.593] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 5163.593] (==) NOUVEAU(0): RGB weight 888
[ 5163.593] (==) NOUVEAU(0): Default visual is TrueColor
[ 5163.593] (==) NOUVEAU(0): Using HW cursor
[ 5163.593] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 5163.593] (==) NOUVEAU(0): Page flipping enabled
[ 5163.660] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 5163.765] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 5163.820] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 5163.876] (II) NOUVEAU(0): EDID for output VGA-1
[ 5163.981] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 5163.981] (II) NOUVEAU(0): Manufacturer: ACI Model: 26a4 Serial#: 18746
[ 5163.981] (II) NOUVEAU(0): Year: 2010 Week: 31
[ 5163.981] (II) NOUVEAU(0): EDID Version: 1.3
[ 5163.981] (II) NOUVEAU(0): Digital Display Input
[ 5163.981] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 55 vert.: 34
[ 5163.981] (II) NOUVEAU(0): Gamma: 2.20
[ 5163.981] (II) NOUVEAU(0): DPMS capabilities: Off
[ 5163.982] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5163.982] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 5163.982] (II) NOUVEAU(0): redX: 0.640 redY: 0.352 greenX: 0.287 greenY: 0.628
[ 5163.982] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.075 whiteX: 0.312 whiteY: 0.328
[ 5163.982] (II) NOUVEAU(0): Supported established timings:
[ 5163.982] (II) NOUVEAU(0): 720x400@70Hz
[ 5163.982] (II) NOUVEAU(0): 640x480@60Hz
[ 5163.982] (II) NOUVEAU(0): 640x480@67Hz
[ 5163.982] (II) NOUVEAU(0): 640x480@72Hz
[ 5163.982] (II) NOUVEAU(0): 640x480@75Hz
[ 5163.982] (II) NOUVEAU(0): 800x600@56Hz
[ 5163.982] (II) NOUVEAU(0): 800x600@60Hz
[ 5163.982] (II) NOUVEAU(0): 800x600@72Hz
[ 5163.982] (II) NOUVEAU(0): 800x600@75Hz
[ 5163.982] (II) NOUVEAU(0): 832x624@75Hz
[ 5163.982] (II) NOUVEAU(0): 1024x768@60Hz
[ 5163.982] (II) NOUVEAU(0): 1024x768@70Hz
[ 5163.982] (II) NOUVEAU(0): 1024x768@75Hz
[ 5163.982] (II) NOUVEAU(0): 1280x1024@75Hz
[ 5163.982] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 5163.982] (II) NOUVEAU(0): Supported standard timings:
[ 5163.982] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 5163.982] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 5163.982] (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 5163.982] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 5163.982] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 5163.982] (II) NOUVEAU(0): Supported detailed timing:
[ 5163.982] (II) NOUVEAU(0): clock: 154.0 MHz Image Size: 550 x 340 mm
[ 5163.982] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5163.982] (II) NOUVEAU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 5163.982] (II) NOUVEAU(0): Serial No: A8LMTF018746
[ 5163.982] (II) NOUVEAU(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 175 MHz
[ 5163.982] (II) NOUVEAU(0): Monitor name: ASUS VW266H
[ 5163.982] (II) NOUVEAU(0): EDID (in hex):
[ 5163.982] (II) NOUVEAU(0): 00ffffffffffff000469a4263a490000
[ 5163.982] (II) NOUVEAU(0): 1f140103803722782acbd0a35a49a024
[ 5163.982] (II) NOUVEAU(0): 135054bfef00714f0101814081809500
[ 5163.982] (II) NOUVEAU(0): b30001010101283c80a070b023403020
[ 5163.982] (II) NOUVEAU(0): 360026542100001a000000ff0041384c
[ 5163.983] (II) NOUVEAU(0): 4d54463031383734360a000000fd0032
[ 5163.983] (II) NOUVEAU(0): 4b1e5511000a202020202020000000fc
[ 5163.983] (II) NOUVEAU(0): 0041535553205657323636480a2000b2
[ 5163.983] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 5163.983] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5163.983] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5164.036] (II) NOUVEAU(0): EDID for output TV-1
[ 5164.036] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 5164.036] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 5164.036] (II) NOUVEAU(0): Output TV-1 disconnected
[ 5164.036] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 5164.036] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1440x900
[ 5164.036] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5164.036] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 5164.036] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5164.036] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5164.037] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 5164.037] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5164.037] (==) NOUVEAU(0): DPI set to (96, 96)
[ 5164.037] (II) Loading sub module "fb"
[ 5164.037] (II) LoadModule: "fb"
[ 5164.037] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5164.038] (II) Module fb: vendor="X.Org Foundation"
[ 5164.038] compiled for 1.11.1, module version = 1.0.0
[ 5164.038] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5164.038] (II) Loading sub module "exa"
[ 5164.038] (II) LoadModule: "exa"
[ 5164.038] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5164.039] (II) Module exa: vendor="X.Org Foundation"
[ 5164.039] compiled for 1.11.1, module version = 2.5.0
[ 5164.039] ABI class: X.Org Video Driver, version 11.0
[ 5164.039] (II) Loading sub module "shadowfb"
[ 5164.039] (II) LoadModule: "shadowfb"
[ 5164.039] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5164.039] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5164.039] compiled for 1.11.1, module version = 1.0.0
[ 5164.039] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5164.039] (II) UnloadModule: "vesa"
[ 5164.039] (II) Unloading vesa
[ 5164.039] (II) UnloadModule: "fbdev"
[ 5164.039] (II) Unloading fbdev
[ 5164.040] (II) UnloadModule: "fbdevhw"
[ 5164.040] (II) Unloading fbdevhw
[ 5164.040] (--) Depth 24 pixmap format is 32 bpp
[ 5164.041] (II) NOUVEAU(0): Opened GPU channel 1
[ 5164.041] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5164.041] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5164.041] (II) NOUVEAU(0): GART: 256MiB available
[ 5164.044] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 5164.044] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5164.044] (II) EXA(0): Driver registered support for the following operations:
[ 5164.044] (II) Solid
[ 5164.044] (II) Copy
[ 5164.044] (II) Composite (RENDER acceleration)
[ 5164.044] (II) UploadToScreen
[ 5164.044] (II) DownloadFromScreen
[ 5164.044] (==) NOUVEAU(0): Backing store disabled
[ 5164.044] (==) NOUVEAU(0): Silken mouse enabled
[ 5164.045] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 5164.045] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5164.045] (==) NOUVEAU(0): DPMS enabled
[ 5164.045] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5164.045] (--) RandR disabled
[ 5164.045] (II) Initializing built-in extension Generic Event Extension
[ 5164.045] (II) Initializing built-in extension SHAPE
[ 5164.045] (II) Initializing built-in extension MIT-SHM
[ 5164.045] (II) Initializing built-in extension XInputExtension
[ 5164.045] (II) Initializing built-in extension XTEST
[ 5164.045] (II) Initializing built-in extension BIG-REQUESTS
[ 5164.045] (II) Initializing built-in extension SYNC
[ 5164.045] (II) Initializing built-in extension XKEYBOARD
[ 5164.046] (II) Initializing built-in extension XC-MISC
[ 5164.046] (II) Initializing built-in extension SECURITY
[ 5164.046] (II) Initializing built-in extension XINERAMA
[ 5164.046] (II) Initializing built-in extension XFIXES
[ 5164.046] (II) Initializing built-in extension RENDER
[ 5164.046] (II) Initializing built-in extension RANDR
[ 5164.046] (II) Initializing built-in extension COMPOSITE
[ 5164.046] (II) Initializing built-in extension DAMAGE
[ 5164.046] (II) SELinux: Disabled on system
[ 5164.059] (EE) AIGLX error: dlopen of /usr/lib/i386-linux-gnu/dri/nouveau_dri.so failed (/usr/lib/i386-linux-gnu/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
[ 5164.060] (EE) AIGLX: reverting to software rendering
[ 5164.060] (II) AIGLX: Screen 0 is not DRI capable
[ 5164.064] (II) AIGLX: Loaded and initialized swrast
[ 5164.064] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 5164.070] (II) NOUVEAU(0): NVEnterVT is called.
[ 5164.140] (II) NOUVEAU(0): Setting screen physical size to 380 x 238
[ 5164.140] resize called 1440 900
[ 5164.209] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 5164.210] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5164.210] (II) LoadModule: "evdev"
[ 5164.210] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.210] (II) Module evdev: vendor="X.Org Foundation"
[ 5164.210] compiled for 1.11.0, module version = 2.6.0
[ 5164.210] Module class: X.Org XInput Driver
[ 5164.210] ABI class: X.Org XInput driver, version 13.0
[ 5164.210] (II) Using input driver 'evdev' for 'Power Button'
[ 5164.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.211] (**) Power Button: always reports core events
[ 5164.211] (**) Power Button: Device: "/dev/input/event4"
[ 5164.211] (--) Power Button: Found keys
[ 5164.211] (II) Power Button: Configuring as keyboard
[ 5164.211] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 5164.211] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5164.211] (**) Option "xkb_rules" "evdev"
[ 5164.211] (**) Option "xkb_model" "pc105"
[ 5164.211] (**) Option "xkb_layout" "us"
[ 5164.212] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5164.212] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5164.212] (II) Using input driver 'evdev' for 'Power Button'
[ 5164.212] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.212] (**) Power Button: always reports core events
[ 5164.212] (**) Power Button: Device: "/dev/input/event3"
[ 5164.212] (--) Power Button: Found keys
[ 5164.212] (II) Power Button: Configuring as keyboard
[ 5164.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 5164.213] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5164.213] (**) Option "xkb_rules" "evdev"
[ 5164.213] (**) Option "xkb_model" "pc105"
[ 5164.213] (**) Option "xkb_layout" "us"
[ 5164.214] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event0)
[ 5164.214] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 5164.214] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 5164.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.214] (**) Razer Razer DeathAdder: always reports core events
[ 5164.214] (**) Razer Razer DeathAdder: Device: "/dev/input/event0"
[ 5164.214] (--) Razer Razer DeathAdder: Found 12 mouse buttons
[ 5164.214] (--) Razer Razer DeathAdder: Found scroll wheel(s)
[ 5164.214] (--) Razer Razer DeathAdder: Found relative axes
[ 5164.214] (--) Razer Razer DeathAdder: Found x and y relative axes
[ 5164.214] (II) Razer Razer DeathAdder: Configuring as mouse
[ 5164.214] (II) Razer Razer DeathAdder: Adding scrollwheel support
[ 5164.214] (**) Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 5164.214] (**) Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5164.214] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 5164.214] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 8)
[ 5164.214] (II) Razer Razer DeathAdder: initialized for relative axes.
[ 5164.215] (**) Razer Razer DeathAdder: (accel) keeping acceleration scheme 1
[ 5164.215] (**) Razer Razer DeathAdder: (accel) acceleration profile 0
[ 5164.215] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 5164.215] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 5164.215] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 5164.215] (II) No input driver/identifier specified (ignoring)
[ 5164.216] (II) config/udev: Adding input device IOGEAR GCS1104 V1.2.113 (/dev/input/event1)
[ 5164.216] (**) IOGEAR GCS1104 V1.2.113: Applying InputClass "evdev keyboard catchall"
[ 5164.216] (II) Using input driver 'evdev' for 'IOGEAR GCS1104 V1.2.113'
[ 5164.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.217] (**) IOGEAR GCS1104 V1.2.113: always reports core events
[ 5164.217] (**) IOGEAR GCS1104 V1.2.113: Device: "/dev/input/event1"
[ 5164.217] (--) IOGEAR GCS1104 V1.2.113: Found keys
[ 5164.217] (II) IOGEAR GCS1104 V1.2.113: Configuring as keyboard
[ 5164.217] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input1/event1"
[ 5164.217] (II) XINPUT: Adding extended input device "IOGEAR GCS1104 V1.2.113" (type: KEYBOARD, id 9)
[ 5164.217] (**) Option "xkb_rules" "evdev"
[ 5164.217] (**) Option "xkb_model" "pc105"
[ 5164.217] (**) Option "xkb_layout" "us"
[ 5164.218] (II) config/udev: Adding input device IOGEAR GCS1104 V1.2.113 (/dev/input/event2)
[ 5164.218] (**) IOGEAR GCS1104 V1.2.113: Applying InputClass "evdev pointer catchall"
[ 5164.218] (II) Using input driver 'evdev' for 'IOGEAR GCS1104 V1.2.113'
[ 5164.218] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5164.218] (**) IOGEAR GCS1104 V1.2.113: always reports core events
[ 5164.218] (**) IOGEAR GCS1104 V1.2.113: Device: "/dev/input/event2"
[ 5164.218] (--) IOGEAR GCS1104 V1.2.113: Found 9 mouse buttons
[ 5164.218] (--) IOGEAR GCS1104 V1.2.113: Found scroll wheel(s)
[ 5164.218] (--) IOGEAR GCS1104 V1.2.113: Found relative axes
[ 5164.218] (--) IOGEAR GCS1104 V1.2.113: Found x and y relative axes
[ 5164.218] (II) IOGEAR GCS1104 V1.2.113: Configuring as mouse
[ 5164.219] (II) IOGEAR GCS1104 V1.2.113: Adding scrollwheel support
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: YAxisMapping: buttons 4 and 5
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5164.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/input/input2/event2"
[ 5164.219] (II) XINPUT: Adding extended input device "IOGEAR GCS1104 V1.2.113" (type: MOUSE, id 10)
[ 5164.219] (II) IOGEAR GCS1104 V1.2.113: initialized for relative axes.
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: (accel) keeping acceleration scheme 1
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: (accel) acceleration profile 0
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: (accel) acceleration factor: 2.000
[ 5164.219] (**) IOGEAR GCS1104 V1.2.113: (accel) acceleration threshold: 4
[ 5164.220] (II) config/udev: Adding input device IOGEAR GCS1104 V1.2.113 (/dev/input/mouse1)
[ 5164.220] (II) No input driver/identifier specified (ignoring)
[ 5164.220] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5164.221] (II) No input driver/identifier specified (ignoring)
[ 5164.938] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5164.939] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 5164.939] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 5164.939] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5164.939] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5164.939] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5165.273] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5165.273] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5165.273] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5165.273] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5165.273] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5165.274] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5165.609] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5165.609] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5165.609] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5165.609] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5165.609] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5165.609] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5165.609] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5165.610] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5180.749] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5180.749] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5180.749] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5180.749] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5180.749] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5180.749] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5180.749] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5180.750] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5181.086] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5181.086] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5181.086] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5181.086] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5181.086] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5181.086] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5181.429] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5181.430] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5181.430] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5181.430] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5181.430] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5181.430] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 5184.436] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 5185.202] (II) NOUVEAU(0): Using hsync ranges from config file
[ 5185.202] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 5185.202] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5185.202] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 5185.202] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 6586.809] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 6586.809] (II) NOUVEAU(0): Using hsync ranges from config file
[ 6586.809] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 6586.809] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 6586.809] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 6586.810] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 6586.956] resize called 2160 900
[ 6716.445] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 6716.445] (II) NOUVEAU(0): Using hsync ranges from config file
[ 6716.445] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 6716.445] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 6716.445] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 6716.446] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 6716.616] resize called 1440 900
[ 6716.882] resize called 1440 900
[ 6729.185] (II) NOUVEAU(0): EDID vendor "ACI", prod id 9892
[ 6729.185] (II) NOUVEAU(0): Using hsync ranges from config file
[ 6729.185] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 6729.185] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 6729.185] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 6729.186] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 6729.246] resize called 1680 1050





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 871uuvsgs1.fsf@newsguy.com">http://lists.debian.org/871uuvsgs1.fsf@newsguy.com

Arnt Karlsen 10-02-2011 09:56 PM

wrestling with xrandr
 
On Sat, 01 Oct 2011 10:47:26 -0500, Harry wrote in message
<87sjncogs1.fsf@newsguy.com>:

> Scott Ferguson <prettyfly.productions@gmail.com> writes:
>
> NOTE: Correction to monitor native resolution posted in OP
> Native resolution: 1920 x 1200 (I previously said 1900x1280)

..you wanna try it at the native resolution. ;o)
If you find the font sizes small, you wanna blow them up
to suit your taste, rather than trash your screen with a
postage stamp size resolution.

--
..med vennlig hilsen = with Kind Regards from Arnt Karlsen
...with a number of polar bear hunters in his ancestry...
Scenarios always come in sets of three:
best case, worst case, and just in case.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111002235633.0c766c56@nb6.lan">http://lists.debian.org/20111002235633.0c766c56@nb6.lan

Scott Ferguson 10-03-2011 06:26 AM

wrestling with xrandr
 
On 02/10/11 23:46, Harry Putnam wrote:
> Scott Ferguson <prettyfly.productions@gmail.com> writes:
>
>> On 02/10/11 01:47, Harry Putnam wrote:
>>> Scott Ferguson <prettyfly.productions@gmail.com> writes:
>>>

<snipped>

>> It would be appreciated, greatly, if you could use "Reply" to
>> continue a thread - saves searching through lots of posts in order
>> to patch together all the needed information.
>
> I'm not sure what problem you are having with threading.

This is "wrestling with xrandr", you started with a thread called
"virtual resolution of desktop"

<snipped>

>>>
>>> [...]
>>>
>>>> What Debian release are you running? $ cat /etc/issue

^^^ this is obviously a mistake *I've* made...
I assumed that as you didn't initially say what Debian release you were
running - that you didn't know. And I should have more clearly separated
the question from the fallback query so that your email client wouldn't
reformat them onto the same line - as it has.
My apologies.

What Debian release are you running?
Your xlog says Pixman 0.22.2... (Wheezy or Sid)
Your /etc/issue said testing/unstable - confusing.

In an earlier post I suggested that:-
http://wiki.debian.org/XStrikeForce/HowToRandR12
was only relevant to Thinkpads - that is incorrect (I was wrongly
referring to another page). The page is useful - those commands, except
where superseded, still apply to current version

<snipped>

> I'm using the standard fonts that are installed with xorg and gnome
> desktop.

Thanks - GNOME tells me a bit about your system.

> I'm not using the gnome desktop. I use fluxbox, but I believe the
> same fonts are used.

They are - unless you specifically change them.

>
> I'm not really sure what drivers are being used. T think it is
> Nouvea.

The proprietary driver has problems with panning.
I don't know which version of libxrandr2 you are running (I use 1.3)

> I see that mentioned in Xorg.log, and have included Xorg.log at the
> end.

Thankyou.

> I'm not sure how to interpret all that. I see several modules
> loaded.

That is usual. (multiple modules, difficult to interpret)

> There is probably some handier way to get the information but I don't
> know it.

/var/log/Xorg.0.log (I assume that's what you mean by xorg.log)

>
> I've fired up gnome desktop and have this information from
> Settings/Appearance fonts tab:
>
> Application font: sans 7 Document font: sans 7 desktop:
> sans 7 Window title: Sans Bold 8 Fixed width monospace 9

I assume you mean the DejaVu family.

>
> Monochrom [], Best contrast [], Best shapes [] and Subpixel smoothing
> [x]
>
> I have Subpixel Smoothing turned on as you see above, but honestly I
> see no differnce no matter which of those I select.

It makes a slight difference - it also means you have anti-aliasing
enabled (I suspect that's default).
It doesn't appear that you are running TrueType fonts which make more
use of subpixel rendering.
I wouldn't worry about it until you stop running the vesa video driver.

>
> The `details' button shows 96dpi

I'm not sure why you have trouble with the fonts - all those settings
seem about normal for people with normal vision.

>
>>>
>>>>> TV-1 connected 720x576+1440+0 (normal left inverted right x
>>>>> axis y axis) 0mm x 0mm 720x576 50.0*+ 1024x768
>>>>> 50.0
>>>> <snipped> Are you happy with only 720x576 resolution on the
>>>> TV-out? 1024x768 is possible.
>>>

<snipped>

>>> But I'd still like to know how to get 1024x768.
>>
>> I'll add it to the xrandr command.
>
<snipped>

>> I'd suggest using the current default resolution (1440x900) and a
>> panning resolution of 1680x1050 (saves scaling problems)
>
> Thanks for the tip. But I'm not sure what the command syntax would
> be. I'm guessing:
>
> xrandr --fb 1440x900 --output DVI-I-1 --panning 1680x1050

what do you get from:-
$ xrandr --output default --dryrun --mode 1440x900 --panning 1680x1050

if no errors, try without the dryrun parameter

if you get error codes please post - if screen refreshes (without
printing errors) but doesn't seem to pan, try Ctrl++ or Ctrl+-

(this may also work:-
$ xrandr -s 1440x900 --dryrun --panning 1680x1050)

NOTE: I haven't done the virtual screen/VRAM math - your card doesn't
have a lot of VRAM and you do want big screens....

>
> If that is it, then it fails here: xrandr --fb 1440x900 --output
> DVI-I-1 --panning 1680x1050

Those parameters are incorrect.

> xrandr: specified screen 1440x900 not large enough for output TV-1
> (720x576+1440+0) X Error of failed request: BadMatch (invalid
> parameter attributes) Major opcode of failed request: 150 (RANDR)
> Minor opcode of failed request: 29 (RRSetPanning) Serial number of
> failed request: 32 Current serial number in output stream: 32
>
> I'm not sure how to change the TV setting. Or even if it can be
> changed to accommodate that command.

try:-
$ xrandr --output 'TV-1' --dryrun --mode 1024x768

if *no* errors (probably will be due to a output name problem) *then*
try without the dryrun parameter.

Might have to create a minimal xorg.conf for that...

>
>
> Trying: xrandr --output DVI-I-1 --panning 1680x1050
>
> That shakes the screen a bit, and the mouse can now disappear
> slightly at the edges, but as reported in the bug...it appears that
> panning is being blocked.

2 pixel variation in screen width and height? If so that's the bug in v1.3.2

>
> As you've noted there is a bug that might prevent panning in any
> case.
>
>
>> Brian has pointed a bug report that might be relevant. I believe
>> the scaling problem is still outstanding - but (with new mode
>> creation) panning is definitely not a problem with nouveau (I use
>> it on my netbooks). I don't know about Testing though (and can't
>> test it this weekend).
>
> I didn't quite follow what you meant by "(with new mode creation)".

xrandr can only use existing modes - either those detected by X on boot
(shown in /var/log/Xorg.0.log) or those written in /etc/X11/xorg.conf.
cvt is used to determine valid modes - to use those that X doesn't know
about, xrandr creates them using the newmode or addmode parameters.

>
> So you are able to do panning then? At least on a netbook.

Yes.
Squeeze running Trinity v.1.3.0 of libxrandr2

<snipped>

> Xorg.log
>
> [ 5163.573] X.Org X Server 1.11.1 Release Date: 2011-09-24 [
> 5163.574] X Protocol Version 11, Revision 0 [ 5163.574] Build
> Operating System: Linux 2.6.32-5-amd64 i686 Debian [ 5163.574]
> Current Operating System: Linux reader 3.0.0-1-686-pae #1 SMP Sat Aug
> 27 16:41:03 UTC 2011 i686

Is this a custom kernel?

> [ 5163.574] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-1-686-pae
> root=UUID=83a94f1d-e6e6-432e-86ad-b24754755fff ro quiet splash
<snipped>

> [ 5163.575] (WW) `fonts.dir' not found (or not valid) in
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType". [ 5163.575]
> Entry deleted from font path. [ 5163.576] (Run 'mkfontdir' on
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").

^^^
<snipped>

> [ 5163.582] (==) Matched nouveau as autoconfigured driver 0 [
> 5163.582] (==) Matched nv as autoconfigured driver 1 [ 5163.582]
> (==) Matched vesa as autoconfigured driver 2 [ 5163.582] (==)
> Matched fbdev as autoconfigured driver 3 [ 5163.582] (==) Assigned
> the driver to the xf86ConfigLayout [ 5163.582] (II) LoadModule:
> "nouveau" [ 5163.582] (II) Loading
> /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 5163.583] (II) Module
> nouveau: vendor="X.Org Foundation" [ 5163.583] compiled for 1.11.0,
> module version = 0.0.16 [ 5163.583] Module class: X.Org Video
> Driver [ 5163.583] ABI class: X.Org Video Driver, version 11.0 [
> 5163.583] (II) LoadModule: "nv" [ 5163.584] (WW) Warning, couldn't
> open module nv [ 5163.584] (II) UnloadModule: "nv" [ 5163.584] (II)
> Unloading nv [ 5163.584] (EE) Failed to load module "nv" (module
> does not exist, 0)

^^^^^^^^^^^^^^^^^^^^^^^^

> [ 5163.584] (II) LoadModule: "vesa"


Falling back to vesa(?)


> [ 5163.584] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
<snipped>

> [ 5163.592] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [
> 5163.592] (II) [drm] DRM interface version 1.4 [ 5163.592] (II)
> [drm] DRM open master succeeded. [ 5163.593] (--) NOUVEAU(0):
> Chipset: "NVIDIA NV36" [ 5163.593] (II) NOUVEAU(0): Creating default
> Display subsection in Screen section "Default Screen Section" for
> depth/fbbpp 24/32 [ 5163.593] (==) NOUVEAU(0): Depth 24, (--)
> framebuffer bpp 32 [ 5163.593] (==) NOUVEAU(0): RGB weight 888 [
> 5163.593] (==) NOUVEAU(0): Default visual is TrueColor [ 5163.593]
> (==) NOUVEAU(0): Using HW cursor [ 5163.593] (==) NOUVEAU(0): GLX
> sync to VBlank disabled. [ 5163.593] (==) NOUVEAU(0): Page flipping
> enabled [ 5163.660] (II) NOUVEAU(0): Output VGA-1 has no monitor
> section [ 5163.765] (II) NOUVEAU(0): Output DVI-I-1 has no monitor
> section [ 5163.820] (II) NOUVEAU(0): Output TV-1 has no monitor
> section [ 5163.876] (II) NOUVEAU(0): EDID for output VGA-1 [
> 5163.981] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 5163.981] (II)
> NOUVEAU(0): Manufacturer: ACI Model: 26a4 Serial#: 18746 [
> 5163.981] (II) NOUVEAU(0): Year: 2010 Week: 31 [ 5163.981] (II)
> NOUVEAU(0): EDID Version: 1.3 [ 5163.981] (II) NOUVEAU(0): Digital
> Display Input [ 5163.981] (II) NOUVEAU(0): Max Image Size [cm]:
> horiz.: 55 vert.: 34 [ 5163.981] (II) NOUVEAU(0): Gamma: 2.20 [
> 5163.981] (II) NOUVEAU(0): DPMS capabilities: Off [ 5163.982] (II)
> NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [
> 5163.982] (II) NOUVEAU(0): First detailed timing is preferred mode [
> 5163.982] (II) NOUVEAU(0): redX: 0.640 redY: 0.352 greenX: 0.287
> greenY: 0.628 [ 5163.982] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.075
> whiteX: 0.312 whiteY: 0.328 [ 5163.982] (II) NOUVEAU(0): Supported
> established timings:

^^^ all that looks fine.

<snipped>

> [ 5164.044] (==) NOUVEAU(0): Backing store disabled [ 5164.044]
> (==) NOUVEAU(0): Silken mouse enabled [ 5164.045] (II) NOUVEAU(0):
> [XvMC] Associated with NV30 texture adapter. [ 5164.045] (II)
> NOUVEAU(0): [XvMC] Extension initialized. [ 5164.045] (==)
> NOUVEAU(0): DPMS enabled [ 5164.045] (II) NOUVEAU(0): RandR 1.2
> enabled, ignore the following RandR disabled message. [ 5164.045]
> (--) RandR disabled

??!!

> [ 5164.045] (II) Initializing built-in extension Generic Event
> Extension [ 5164.045] (II) Initializing built-in extension SHAPE [
> 5164.045] (II) Initializing built-in extension MIT-SHM [ 5164.045]
> (II) Initializing built-in extension XInputExtension [ 5164.045]
> (II) Initializing built-in extension XTEST [ 5164.045] (II)
> Initializing built-in extension BIG-REQUESTS [ 5164.045] (II)
> Initializing built-in extension SYNC [ 5164.045] (II) Initializing
> built-in extension XKEYBOARD [ 5164.046] (II) Initializing built-in
> extension XC-MISC [ 5164.046] (II) Initializing built-in extension
> SECURITY [ 5164.046] (II) Initializing built-in extension XINERAMA [
> 5164.046] (II) Initializing built-in extension XFIXES [ 5164.046]
> (II) Initializing built-in extension RENDER [ 5164.046] (II)
> Initializing built-in extension RANDR [ 5164.046] (II) Initializing
> built-in extension COMPOSITE [ 5164.046] (II) Initializing built-in
> extension DAMAGE [ 5164.046] (II) SELinux: Disabled on system [
> 5164.059] (EE) AIGLX error: dlopen of
> /usr/lib/i386-linux-gnu/dri/nouveau_dri.so failed
> (/usr/lib/i386-linux-gnu/dri/nouveau_dri.so: cannot open shared
> object file: No such file or directory)

3D hardware disabled...

<snipped>

That log makes little sense to me - where you modifying settings during
this particular session?
If so please:-
boot up your box
login (and startx)
$ cat /var/log/Xorg.0.log > ~/xorg.log
attach xorg.log to post.

I haven't had a chance to test on identical hardware today - perhaps
later in the week. I won't be able to test with the same Debian release
- so I won't be able to guarantee it'll work :-(

Cheers


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4E8955AC.8070403@gmail.com">http://lists.debian.org/4E8955AC.8070403@gmail.com


All times are GMT. The time now is 09:41 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.