FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 04-30-2011, 08:51 PM
Roger Morgan
 
Default Problem with Samba on Squeeze

Samba is running but I can't connect to it, and when I do the following test
(from the Samba server):
smbclient -L servername

the response (after entering correct password) is:
----cut here---
Receiving SMB: Server stopped responding
session setup failed: Call timed out: server did not respond after 20000
milliseconds
---end of response--

the Samba programs are running, here's the relevant part of the output of ps -ef
| grep mb
root 1969 1 0 18:13 ? 00:00:00 /usr/sbin/smbd -D
root 1983 1969 0 18:13 ? 00:00:00 /usr/sbin/smbd -D
root 2308 1 0 18:13 ? 00:00:00 /usr/sbin/nmbd -D

And here's my smb.conf file:
#======================= Global Settings =======================

[global]
log file = /var/log/samba/log.%m
load printers = yes
guest account = leong
printer = ML-1510_700
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:*
%n
*passwordsupdatedssuccessfully* .
obey pam restrictions = yes
write list = leong
encrypt passwords = true
public = yes
passwd program = /usr/bin/passwd %u
passdb backend = tdbsam
dns proxy = no
writeable = yes
server string = %h server
path = /var/common
unix password sync = yes
workgroup = galaxy
comment = lyra smbshare
# valid users = leong (no valid users list means anyone can login)
syslog = 0
panic action = /usr/share/samba/panic-action %d
max log size = 1000
directory mode = 766
pam password change = yes

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.


# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de>
for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \%Nprofiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \%N\%Uprofile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d
/var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

#======================= Share Definitions =======================

[homes]
comment = Home Directories
browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700

# By default, serverusername shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to serverusername
# This might need tweaking when using external authentication schemes
valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
create mask = 0700
comment = All Printers
browseable = no
printable = yes
writeable = no
path = /var/spool/samba

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /media/cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom


[Samsung1510]
printable = yes

[common]


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 504948.40680.qm@web65501.mail.ac4.yahoo.com">http://lists.debian.org/504948.40680.qm@web65501.mail.ac4.yahoo.com
 
Old 05-01-2011, 03:15 PM
Camaleón
 
Default Problem with Samba on Squeeze

On Sat, 30 Apr 2011 13:51:51 -0700, Roger Morgan wrote:

> Samba is running but I can't connect to it, and when I do the following
> test (from the Samba server):
> smbclient -L servername
>
> the response (after entering correct password) is:
> ----cut here---
> Receiving SMB: Server stopped responding session setup failed: Call
> timed out: server did not respond after 20000 milliseconds
> ---end of response--

(...)

It looks something related to authentication.

Is there anything interesting at samba logs? I know samba logs are pretty
hard to understand :-) but maybe there is something in there that give
you any clue.

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: pan.2011.05.01.15.15.50@gmail.com">http://lists.debian.org/pan.2011.05.01.15.15.50@gmail.com
 
Old 05-01-2011, 05:58 PM
Roger Morgan
 
Default Problem with Samba on Squeeze

> From: Camaleón <noelamac@gmail.com>

> To: debian-user@lists.debian.org
> Sent: Sun, May 1, 2011 5:15:50 PM
> Subject: Re: Problem with Samba on Squeeze
>
> On Sat, 30 Apr 2011 13:51:51 -0700, Roger Morgan wrote:
>
> > Samba is running but I can't connect to it, and when I do the following
> > test (from the Samba server):
> > smbclient -L servername
> >
> > the response (after entering correct password) is:
> > ----cut here---
> > Receiving SMB: Server stopped responding session setup failed: Call
> > timed out: server did not respond after 20000 milliseconds
> > ---end of response--
>
> (...)
>
> It looks something related to authentication.
>
> Is there anything interesting at samba logs? I know samba logs are pretty
> hard to understand :-) but maybe there is something in there that give
> you any clue.
>
Here are the logs for the relevant time. First log.nmbd :
---cut here---
[2011/04/30 18:13:03, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/04/30 18:13:03.057129, 0] nmbd/nmbd.c:696(open_sockets)
[2011/04/30 18:13:13, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/04/30 18:13:44.242349, 0]
nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
*****

Samba name server LYRA is now a local master browser for workgroup GALAXY on
subnet 192.168.1.3

*****
[2011/04/30 22:55:38.467321, 0] nmbd/nmbd.c:71(terminate)
Got SIGTERM: going down...
[2011/05/01 06:50:24, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
--end of log.nmbd extract ---

Then log.smbd:
----cut here--start of log.smbd extract---
[2011/04/30 06:23:08, 0] smbd/server.c:1123(main)
smbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/04/30 07:53:45.799147, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 08:25:45.948255, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 11:05:46.656557, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 11:37:46.807467, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 13:13:47.238251, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 14:17:47.532892, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 14:49:47.677722, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 15:21:47.821676, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 18:01:50.789490, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/04/30 18:13:03, 0] smbd/server.c:1123(main)
smbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/04/30 20:41:49.436355, 0] lib/util_sock.c:1441(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
[2011/05/01 06:50:24, 0] smbd/server.c:1123(main)
smbd version 3.5.6 started.
---end of log.smbd extract---
I don't understand the getpeername error message.

Roger


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 861007.84510.qm@web65502.mail.ac4.yahoo.com">http://lists.debian.org/861007.84510.qm@web65502.mail.ac4.yahoo.com
 
Old 05-01-2011, 06:15 PM
Camaleón
 
Default Problem with Samba on Squeeze

On Sun, 01 May 2011 10:58:01 -0700, Roger Morgan wrote:

>> From: Camaleón
>
>> It looks something related to authentication.
>>
>> Is there anything interesting at samba logs? I know samba logs are
>> pretty hard to understand :-) but maybe there is something in there
>> that give you any clue.
>>
> Here are the logs for the relevant time.

(...)

Sadly those are pretty generic errors and don't tell much about the cause
of the failure. Try by increasing samba log level¹ ("log level = 3"),
restart samba daemons, run smbclient again and review again the logs.

P.S. 1 - Don't forget to restore to the previous samba log level or your
disk will be quickly flooded :-)

P.S. 2 - Before sending the logs, review the content to avoid sending
sensible data (replace/delete anything you don't want to be viewed by
everyone).

¹http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#LOGLEVEL

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: pan.2011.05.01.18.15.10@gmail.com">http://lists.debian.org/pan.2011.05.01.18.15.10@gmail.com
 
Old 05-02-2011, 09:32 AM
Roger Morgan
 
Default Problem with Samba on Squeeze

> From: Camaleón <noelamac@gmail.com>

> To: debian-user@lists.debian.org
> Sent: Sun, May 1, 2011 8:15:10 PM
> Subject: Re: Problem with Samba on Squeeze
>
> On Sun, 01 May 2011 10:58:01 -0700, Roger Morgan wrote:
>
> >> From: Camaleón
> >
> >> It looks something related to authentication.
> >>
> >> Is there anything interesting at samba logs? I know samba logs are
> >> pretty hard to understand :-) but maybe there is something in there
> >> that give you any clue.
> >>
> > Here are the logs for the relevant time.
>
> (...)
>
> Sadly those are pretty generic errors and don't tell much about the cause
> of the failure. Try by increasing samba log level¹ ("log level = 3"),
> restart samba daemons, run smbclient again and review again the logs.
>
> P.S. 1 - Don't forget to restore to the previous samba log level or your
> disk will be quickly flooded :-)
>
> P.S. 2 - Before sending the logs, review the content to avoid sending
> sensible data (replace/delete anything you don't want to be viewed by

After setting log level = 3, rebooting, and running smbclient again,
there are 4 logfiles. The extra 2 are log.lyra and log.__fff_127.0.0.1
All four are copied below ....
----start log.nmbd-------------------------
[2011/05/02 11:03:53, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/05/02 11:03:53.585807, 2] lib/tallocmsg.c:106(register_msg_pool_usage)
Registered MSG_REQ_POOL_USAGE
[2011/05/02 11:03:53.585855, 2] lib/dmallocmsg.c:77(register_dmalloc_msgs)
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2011/05/02 11:03:53.585904, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2011/05/02 11:03:53.586029, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2011/05/02 11:03:53.586067, 3] param/loadparm.c:7842(do_section)
Processing section "[global]"
[2011/05/02 11:03:53.586524, 3] nmbd/nmbd.c:383(reload_nmbd_services)
services not loaded
[2011/05/02 11:03:53.596088, 2] nmbd/nmbd.c:890(main)
Becoming a daemon.
[2011/05/02 11:03:53.599547, 3] nmbd/nmbd.c:951(main)
Opening sockets 137
[2011/05/02 11:03:53.599695, 3]
../lib/util/util_net.c:68(interpret_string_addr_internal)
interpret_string_addr_internal: getaddrinfo failed for name 0.0.0.0 [Address
family for hostname not supported]
[2011/05/02 11:03:53.599750, 0] nmbd/nmbd.c:696(open_sockets)
[2011/05/02 11:04:04, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/05/02 11:04:04.655530, 2] lib/tallocmsg.c:106(register_msg_pool_usage)
Registered MSG_REQ_POOL_USAGE
[2011/05/02 11:04:04.655571, 2] lib/dmallocmsg.c:77(register_dmalloc_msgs)
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2011/05/02 11:04:04.655620, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2011/05/02 11:04:04.655740, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2011/05/02 11:04:04.655777, 3] param/loadparm.c:7842(do_section)
Processing section "[global]"
[2011/05/02 11:04:04.656233, 3] nmbd/nmbd.c:383(reload_nmbd_services)
services not loaded
[2011/05/02 11:04:04.656294, 2] nmbd/nmbd.c:890(main)
Becoming a daemon.
[2011/05/02 11:04:04.659356, 3] nmbd/nmbd.c:951(main)
Opening sockets 137
[2011/05/02 11:04:04.659551, 3] nmbd/nmbd.c:739(open_sockets)
open_sockets: Broadcast sockets opened.
[2011/05/02 11:04:04.659675, 2] lib/interface.c:340(add_interface)
added interface eth1 ip=fe80::211:43ff:fea5:5e0e%eth1
bcast=fe80::ffff:ffff:ffff:ffff%eth1 netmask=ffff:ffff:ffff:ffff::
[2011/05/02 11:04:04.659792, 2] lib/interface.c:340(add_interface)
added interface eth1 ip=192.168.1.3 bcast=192.168.1.255 netmask=255.255.255.0
[2011/05/02 11:04:04.659896, 2] nmbd/nmbd_subnetdb.c:171(make_subnet)
making subnet name:192.168.1.3 Broadcast address:192.168.1.255 Subnet
mask:255.255.255.0
[2011/05/02 11:04:04.659931, 2] nmbd/nmbd_subnetdb.c:288(create_subnets)
create_subnets: ignoring non IPv4 interface.
[2011/05/02 11:04:04.659958, 2] nmbd/nmbd_subnetdb.c:171(make_subnet)
making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet
mask:0.0.0.0
[2011/05/02 11:04:04.659988, 2] nmbd/nmbd_subnetdb.c:171(make_subnet)
making subnet name:REMOTE_BROADCAST_SUBNET Broadcast address:0.0.0.0 Subnet
mask:0.0.0.0
[2011/05/02 11:04:04.744805, 2] nmbd/nmbd_lmhosts.c:41(load_lmhosts_file)
load_lmhosts_file: Can't open lmhosts file /etc/samba/lmhosts. Error was No
such file or directory
[2011/05/02 11:04:04.744903, 3] nmbd/nmbd.c:973(main)
Loaded hosts file /etc/samba/lmhosts
[2011/05/02 11:04:04.745293, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<00> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:04.745339, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<20> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:04.745380, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:04.745418, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:04.745661, 3]
nmbd/nmbd_serverlistdb.c:156(create_server_on_workgroup )
create_server_on_workgroup: Created server entry LYRA of type 40819a03 (lyra
server) on workgroup GALAXY.
[2011/05/02 11:04:04.745700, 3]
nmbd/nmbd_workgroupdb.c:264(initiate_myworkgroup_startu p)
initiate_myworkgroup_startup: Added server name entry LYRA on subnet
192.168.1.3
[2011/05/02 11:04:04.745750, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<00> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745787, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<20> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745828, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745865, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745908, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<20> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745947, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<03> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.745985, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<00> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.746025, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<00> with first IP 192.168.1.3
ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.746064, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<1e> with first IP 192.168.1.3
ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2011/05/02 11:04:04.746099, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<00> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2011/05/02 11:04:04.746135, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name *<20> with first IP 192.168.1.3 ttl=0
nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2011/05/02 11:04:04.746171, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2011/05/02 11:04:04.746207, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2011/05/02 11:04:04.746394, 3]
nmbd/nmbd_sendannounce.c:207(send_host_announcement)
send_host_announcement: type 819a03 for host LYRA on subnet 192.168.1.3 for
workgroup GALAXY
[2011/05/02 11:04:08.760260, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<20> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:08.760357, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<03> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:08.760399, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name LYRA<00> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:08.760438, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<00> with first IP 192.168.1.3
ttl=0 nb_flags=80 to subnet 192.168.1.3
[2011/05/02 11:04:08.760478, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<1e> with first IP 192.168.1.3
ttl=0 nb_flags=80 to subnet 192.168.1.3
[2011/05/02 11:04:08.760515, 2]
nmbd/nmbd_elections.c:107(check_for_master_browser_fail )
check_for_master_browser_fail: Forcing election on workgroup GALAXY subnet
192.168.1.3
[2011/05/02 11:04:08.760553, 3] nmbd/nmbd_elections.c:364(check_elections)
check_elections: >>> Starting election for workgroup GALAXY on subnet
192.168.1.3 <<<
[2011/05/02 11:04:11.330976, 3] nmbd/nmbd_serverlistdb.c:423(write_browse_list)
write_browse_list: Wrote browse list into file /var/cache/samba/browse.dat
[2011/05/02 11:04:12.332068, 2] nmbd/nmbd_elections.c:40(send_election_dgram)
send_election_dgram: Sending election packet for workgroup GALAXY on subnet
192.168.1.3
[2011/05/02 11:04:14.333657, 2] nmbd/nmbd_elections.c:40(send_election_dgram)
send_election_dgram: Sending election packet for workgroup GALAXY on subnet
192.168.1.3
[2011/05/02 11:04:16.336179, 2] nmbd/nmbd_elections.c:40(send_election_dgram)
send_election_dgram: Sending election packet for workgroup GALAXY on subnet
192.168.1.3
[2011/05/02 11:04:18.337661, 2] nmbd/nmbd_elections.c:40(send_election_dgram)
send_election_dgram: Sending election packet for workgroup GALAXY on subnet
192.168.1.3
[2011/05/02 11:04:20.339996, 2] nmbd/nmbd_elections.c:40(send_election_dgram)
send_election_dgram: Sending election packet for workgroup GALAXY on subnet
192.168.1.3
[2011/05/02 11:04:20.340115, 2] nmbd/nmbd_elections.c:200(run_elections)
run_elections: >>> Won election for workgroup GALAXY on subnet 192.168.1.3 <<<
[2011/05/02 11:04:20.340151, 2]
nmbd/nmbd_become_lmb.c:536(become_local_master_browser)
become_local_master_browser: Starting to become a master browser for workgroup
GALAXY on subnet 192.168.1.3
[2011/05/02 11:04:20.340181, 3]
nmbd/nmbd_become_lmb.c:538(become_local_master_browser)
become_local_master_browser: first stage - attempt to register
^1^2__MSBROWSE__^2^1
[2011/05/02 11:04:20.340417, 3] nmbd/nmbd_serverlistdb.c:423(write_browse_list)
write_browse_list: Wrote browse list into file /var/cache/samba/browse.dat
[2011/05/02 11:04:24.343952, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __MSBROWSE__<01> with first IP
192.168.1.3 ttl=0 nb_flags=80 to subnet 192.168.1.3
[2011/05/02 11:04:24.344055, 3]
nmbd/nmbd_become_lmb.c:451(become_local_master_stage1)
become_local_master_stage1: go to stage 2: register the GALAXY<1d> name.
[2011/05/02 11:04:24.344093, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name __MSBROWSE__<01> with first IP
192.168.1.3 ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2011/05/02 11:04:28.348592, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<1d> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet 192.168.1.3
[2011/05/02 11:04:28.348698, 3]
nmbd/nmbd_become_lmb.c:352(become_local_master_stage2)
become_local_master_stage2: registered as master browser for workgroup GALAXY
on subnet 192.168.1.3
[2011/05/02 11:04:28.348752, 3]
nmbd/nmbd_sendannounce.c:68(broadcast_announce_request)
broadcast_announce_request: sending announce request for workgroup GALAXY to
subnet 192.168.1.3
[2011/05/02 11:04:28.348810, 3] nmbd/nmbd_namelistdb.c:250(add_name_to_subnet)
add_name_to_subnet: Added netbios name GALAXY<1d> with first IP 192.168.1.3
ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2011/05/02 11:04:28.348844, 0]
nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
*****

Samba name server LYRA is now a local master browser for workgroup GALAXY on
subnet 192.168.1.3

*****
[2011/05/02 11:04:28.348938, 3]
nmbd/nmbd_sendannounce.c:165(send_local_master_announce ment)
send_local_master_announcement: type 849a03 for name LYRA on subnet
192.168.1.3 for workgroup GALAXY
[2011/05/02 11:04:28.348986, 3]
nmbd/nmbd_sendannounce.c:184(send_workgroup_announcemen t)
send_workgroup_announcement: on subnet 192.168.1.3 for workgroup GALAXY
[2011/05/02 11:04:48.369400, 3] nmbd/nmbd_serverlistdb.c:423(write_browse_list)
write_browse_list: Wrote browse list into file /var/cache/samba/browse.dat
[2011/05/02 11:06:38.469664, 3]
nmbd/nmbd_sendannounce.c:165(send_local_master_announce ment)
send_local_master_announcement: type 849a03 for name LYRA on subnet
192.168.1.3 for workgroup GALAXY
[2011/05/02 11:06:38.469800, 3]
nmbd/nmbd_sendannounce.c:184(send_workgroup_announcemen t)
send_workgroup_announcement: on subnet 192.168.1.3 for workgroup GALAXY
-----end of log.nmbd-----
-----start log.smbd------
[2011/05/02 11:03:53, 0] smbd/server.c:1123(main)
smbd version 3.5.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/05/02 11:03:54.013782, 2] lib/tallocmsg.c:106(register_msg_pool_usage)
Registered MSG_REQ_POOL_USAGE
[2011/05/02 11:03:54.014115, 2] lib/dmallocmsg.c:77(register_dmalloc_msgs)
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2011/05/02 11:03:54.014174, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2011/05/02 11:03:54.014307, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2011/05/02 11:03:54.014342, 3] param/loadparm.c:7842(do_section)
Processing section "[global]"
[2011/05/02 11:03:54.014562, 2] param/loadparm.c:7859(do_section)
Processing section "[homes]"
[2011/05/02 11:03:54.037271, 2] param/loadparm.c:7859(do_section)
Processing section "[printers]"
[2011/05/02 11:03:54.037410, 2] param/loadparm.c:7859(do_section)
Processing section "[print$]"
[2011/05/02 11:03:54.037512, 2] param/loadparm.c:7859(do_section)
Processing section "[Samsung1510]"
[2011/05/02 11:03:54.037586, 2] param/loadparm.c:7859(do_section)
Processing section "[common]"
[2011/05/02 11:03:54.037784, 3] param/loadparm.c:6313(lp_add_ipc)
adding IPC service
[2011/05/02 11:03:54.127975, 3] printing/pcap.c:136(pcap_cache_reload)
reloading printcap cache
[2011/05/02 11:03:54.160703, 3] printing/pcap.c:243(pcap_cache_reload)
reload status: ok
[2011/05/02 11:03:54.160845, 3] param/loadparm.c:6352(lp_add_printer)
adding printer service Samsung_ML-1510_700
[2011/05/02 11:03:54.161041, 2] lib/interface.c:340(add_interface)
added interface eth1 ip=fe80::211:43ff:fea5:5e0e%eth1
bcast=fe80::ffff:ffff:ffff:ffff%eth1 netmask=ffff:ffff:ffff:ffff::
[2011/05/02 11:03:54.299969, 3] smbd/server.c:1165(main)
loaded services
[2011/05/02 11:03:54.300020, 3] smbd/server.c:1180(main)
Becoming a daemon.
[2011/05/02 11:03:54.543360, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.543446, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.543479, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.543590, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:03:54.543620, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:03:54.543646, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:03:54.544698, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 3
[2011/05/02 11:03:54.544737, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 2
[2011/05/02 11:03:54.544763, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 3
[2011/05/02 11:03:54.553470, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:03:54.553533, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.553570, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.553703, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.553732, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.553758, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661005, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661122, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661152, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661179, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661286, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661316, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661343, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661370, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661412, 3] auth/token_util.c:436(create_local_nt_token)
Failed to fetch domain sid for GALAXY
[2011/05/02 11:03:54.661446, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661501, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661528, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661554, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661675, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661706, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661733, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661758, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661798, 3] auth/token_util.c:467(create_local_nt_token)
Failed to fetch domain sid for GALAXY
[2011/05/02 11:03:54.661829, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661856, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.661885, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.661910, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.662233, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.662286, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID
[S-1-5-21-38502757-452903869-1500568620-1000]
[2011/05/02 11:03:54.662339, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-5-2]
[2011/05/02 11:03:54.662374, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-5-11]
[2011/05/02 11:03:54.729672, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.729731, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.729759, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.729914, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730161, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730214, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730241, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730323, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730372, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730399, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730425, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730490, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730537, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730564, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730590, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730667, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730714, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730743, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730770, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730833, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730880, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.730907, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.730934, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731065, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731141, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731169, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731195, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731281, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731310, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731336, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731361, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731402, 3] auth/token_util.c:436(create_local_nt_token)
Failed to fetch domain sid for GALAXY
[2011/05/02 11:03:54.731433, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731486, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731515, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731541, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731628, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731658, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731684, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731710, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731748, 3] auth/token_util.c:467(create_local_nt_token)
Failed to fetch domain sid for GALAXY
[2011/05/02 11:03:54.731779, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731820, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.731847, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.731872, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.732424, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.732463, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID
[S-1-5-21-38502757-452903869-1500568620-501]
[2011/05/02 11:03:54.732501, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-22-2-1001]
[2011/05/02 11:03:54.732542, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-5-2]
[2011/05/02 11:03:54.732578, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-5-32-546]
[2011/05/02 11:03:54.732613, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-22-2-0]
[2011/05/02 11:03:54.732647, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-22-2-7]
[2011/05/02 11:03:54.732682, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-22-2-24]
[2011/05/02 11:03:54.732716, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID [S-1-22-2-29]
[2011/05/02 11:03:54.732757, 3] lib/privileges.c:63(get_privileges)
get_privileges: No privileges assigned to SID
[S-1-5-21-38502757-452903869-1500568620-3003]
[2011/05/02 11:03:54.732811, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.732838, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.732865, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.732943, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.732994, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.733021, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.733046, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.733121, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.733173, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.733200, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:03:54.733226, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:03:54.733303, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:03:54.743967, 3]
printing/printing.c:1412(start_background_queue)
start_background_queue: Starting background LPQ thread
[2011/05/02 11:03:54.744550, 3]
../lib/util/util_net.c:68(interpret_string_addr_internal)
interpret_string_addr_internal: getaddrinfo failed for name 0.0.0.0 [Address
family for hostname not supported]
[2011/05/02 11:03:54.744630, 3]
../lib/util/util_net.c:68(interpret_string_addr_internal)
interpret_string_addr_internal: getaddrinfo failed for name 0.0.0.0 [Address
family for hostname not supported]
[2011/05/02 11:03:54.745308, 2] smbd/server.c:721(smbd_parent_loop)
waiting for connections
-----end log.smbd-----
----start log.lyra -----
[2011/05/02 11:05:52.748104, 3] auth/auth.c:216(check_ntlm_password)
check_ntlm_password: Checking password for unmapped user
[GALAXY][roger]@[LYRA] with the new password interface
[2011/05/02 11:05:52.748160, 3] auth/auth.c:219(check_ntlm_password)
check_ntlm_password: mapped user is: [LYRA][roger]@[LYRA]
[2011/05/02 11:05:52.748201, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748232, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:05:52.748264, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748384, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.748413, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748439, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.748497, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748539, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.748565, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748591, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.748632, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748836, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.748866, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.748892, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749038, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749105, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749134, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749160, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749204, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749258, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749285, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749311, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749355, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749429, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749457, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749484, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749523, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 3
[2011/05/02 11:05:52.749549, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749575, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 3
[2011/05/02 11:05:52.749707, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.749743, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749778, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.749904, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.749931, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:05:52.749957, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750017, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.750047, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750073, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:05:52.750099, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750275, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750304, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750330, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750403, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750452, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750479, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750505, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750572, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750619, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750647, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750674, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750738, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750785, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750812, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750838, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750899, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750946, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.750973, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.750999, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751061, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751108, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751135, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751161, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751222, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751269, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751296, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751322, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751389, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751436, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751463, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751489, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751553, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751600, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751643, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751669, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 2
[2011/05/02 11:05:52.751729, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751766, 3] smbd/sec_ctx.c:418(pop_sec_ctx)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.751795, 3] auth/auth.c:265(check_ntlm_password)
check_ntlm_password: sam authentication for user [roger] succeeded
[2011/05/02 11:05:52.751822, 3] smbd/sec_ctx.c:210(push_sec_ctx)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2011/05/02 11:05:52.751849, 3] smbd/uid.c:429(push_conn_ctx)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2011/05/02 11:05:52.751875, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
---end log.lyra------
----start log.__ffff_127.0.0.1
[2011/05/02 11:05:52.666521, 3] smbd/oplock.c:895(init_oplocks)
init_oplocks: initializing messages.
[2011/05/02 11:05:52.672795, 3]
smbd/oplock_linux.c:224(linux_init_kernel_oplocks)
Linux kernel oplocks enabled
[2011/05/02 11:05:52.672920, 3] smbd/process.c:1485(process_smb)
Transaction 0 of length 194 (0 toread)
[2011/05/02 11:05:52.672960, 3] smbd/process.c:1294(switch_message)
switch message SMBnegprot (pid 2421) conn 0x0
[2011/05/02 11:05:52.672996, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.683800, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [PC NETWORK PROGRAM 1.0]
[2011/05/02 11:05:52.683838, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [MICROSOFT NETWORKS 1.03]
[2011/05/02 11:05:52.683866, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [MICROSOFT NETWORKS 3.0]
[2011/05/02 11:05:52.683893, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [LANMAN1.0]
[2011/05/02 11:05:52.683919, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [LM1.2X002]
[2011/05/02 11:05:52.683946, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [DOS LANMAN2.1]
[2011/05/02 11:05:52.683973, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [LANMAN2.1]
[2011/05/02 11:05:52.683999, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [Samba]
[2011/05/02 11:05:52.684026, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [NT LANMAN 1.0]
[2011/05/02 11:05:52.684053, 3] smbd/negprot.c:586(reply_negprot)
Requested protocol [NT LM 0.12]
[2011/05/02 11:05:52.696005, 3] smbd/negprot.c:404(reply_nt1)
using SPNEGO
[2011/05/02 11:05:52.696039, 3] smbd/negprot.c:691(reply_negprot)
Selected protocol NT LANMAN 1.0
[2011/05/02 11:05:52.709103, 3] smbd/process.c:1485(process_smb)
Transaction 1 of length 162 (0 toread)
[2011/05/02 11:05:52.709145, 3] smbd/process.c:1294(switch_message)
switch message SMBsesssetupX (pid 2421) conn 0x0
[2011/05/02 11:05:52.709173, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.736147, 3] smbd/sesssetup.c:1436(reply_sesssetup_and_X)
wct=12 flg2=0xc801
[2011/05/02 11:05:52.736188, 3]
smbd/sesssetup.c:1190(reply_sesssetup_and_X_spnego)
Doing spnego session setup
[2011/05/02 11:05:52.736220, 3]
smbd/sesssetup.c:1232(reply_sesssetup_and_X_spnego)
NativeOS=[Unix] NativeLanMan=[Samba] PrimaryDomain=[]
[2011/05/02 11:05:52.736283, 3] smbd/sesssetup.c:806(reply_spnego_negotiate)
reply_spnego_negotiate: Got secblob of size 42
[2011/05/02 11:05:52.746851, 3] libsmb/ntlmssp.c:65(debug_ntlmssp_flags)
Got NTLMSSP neg_flags=0x60088215
[2011/05/02 11:05:52.747801, 3] smbd/process.c:1485(process_smb)
Transaction 2 of length 254 (0 toread)
[2011/05/02 11:05:52.747846, 3] smbd/process.c:1294(switch_message)
switch message SMBsesssetupX (pid 2421) conn 0x0
[2011/05/02 11:05:52.747874, 3] smbd/sec_ctx.c:310(set_sec_ctx)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2011/05/02 11:05:52.747910, 3] smbd/sesssetup.c:1436(reply_sesssetup_and_X)
wct=12 flg2=0xc801
[2011/05/02 11:05:52.747937, 3]
smbd/sesssetup.c:1190(reply_sesssetup_and_X_spnego)
Doing spnego session setup
[2011/05/02 11:05:52.747966, 3]
smbd/sesssetup.c:1232(reply_sesssetup_and_X_spnego)
NativeOS=[Unix] NativeLanMan=[Samba] PrimaryDomain=[]
[2011/05/02 11:05:52.748014, 3] libsmb/ntlmssp.c:747(ntlmssp_server_auth)
Got user=[roger] domain=[GALAXY] workstation=[LYRA] len1=24 len2=24
----end log.__ffff_127.0.0.1

I hope you can see something useful here!
Roger


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 519487.51763.qm@web65504.mail.ac4.yahoo.com">http://lists.debian.org/519487.51763.qm@web65504.mail.ac4.yahoo.com
 
Old 05-02-2011, 01:20 PM
Camaleón
 
Default Problem with Samba on Squeeze

On Mon, 02 May 2011 02:32:16 -0700, Roger Morgan wrote:

>> From: Camaleón

>> Sadly those are pretty generic errors and don't tell much about the
>> cause of the failure. Try by increasing samba log level¹ ("log level =
>> 3"), restart samba daemons, run smbclient again and review again the
>> logs.

(...)

> After setting log level = 3, rebooting, and running smbclient again,
> there are 4 logfiles. The extra 2 are log.lyra and log.__fff_127.0.0.1
> All four are copied below ....
> ----start log.nmbd-------------------------

(...)

I think the relevant ones here are the smbd logs. Anyway, I didn't see
any noticeable error or nmbd, it seems to be operating fine :-?

> -----start log.smbd------

(...)

I keep the messages I think can be relevant (or at least the ones that
are "human readable").

> [2011/05/02 11:03:54.662286, 3] lib/privileges.c:63(get_privileges)
> get_privileges: No privileges assigned to SID
> [S-1-5-21-38502757-452903869-1500568620-1000]
> [2011/05/02 11:03:54.662339, 3] lib/privileges.c:63(get_privileges)
> get_privileges: No privileges assigned to SID [S-1-5-2]
> [2011/05/02 11:03:54.662374, 3] lib/privileges.c:63(get_privileges)
> get_privileges: No privileges assigned to SID [S-1-5-11]

(...)

> [2011/05/02 11:03:54.731748, 3] auth/token_util.c:467
> (create_local_nt_token) Failed to fetch domain sid for GALAXY

This bunch of messages seems to be all related but I can't understand
their meaning nor know if they can lead to the error you are seeing :-?

> printing/printing.c:1412(start_background_queue)
> start_background_queue: Starting background LPQ thread
> [2011/05/02 11:03:54.744550, 3]
> ../lib/util/util_net.c:68(interpret_string_addr_internal)
> interpret_string_addr_internal: getaddrinfo failed for name 0.0.0.0
> [Address family for hostname not supported]
> [2011/05/02 11:03:54.744630, 3]
> ../lib/util/util_net.c:68(interpret_string_addr_internal)
> interpret_string_addr_internal: getaddrinfo failed for name 0.0.0.0
> [Address family for hostname not supported]
> [2011/05/02 11:03:54.745308, 2] smbd/server.c:721(smbd_parent_loop)
> waiting for connections

(...)

These ones seem coming from the printing spooler.

> ----start log.lyra -----
> [2011/05/02 11:05:52.748104, 3] auth/auth.c:216(check_ntlm_password)
> check_ntlm_password: Checking password for unmapped user
> [GALAXY][roger]@[LYRA] with the new password interface
> [2011/05/02 11:05:52.748160, 3] auth/auth.c:219(check_ntlm_password)
> check_ntlm_password: mapped user is: [LYRA][roger]@[LYRA]

This record seems to indicate that the user has been logged successfully.

> ----start log.__ffff_127.0.0.1

(...)

> [2011/05/02 11:05:52.696039, 3] smbd/negprot.c:691(reply_negprot)
> Selected protocol NT LANMAN 1.0

Here it selects the protocol...

> [2011/05/02 11:05:52.747966, 3]
> smbd/sesssetup.c:1232(reply_sesssetup_and_X_spnego)
> NativeOS=[Unix] NativeLanMan=[Samba] PrimaryDomain=[]
> [2011/05/02 11:05:52.748014, 3]
> libsmb/ntlmssp.c:747(ntlmssp_server_auth)
> Got user=[roger] domain=[GALAXY] workstation=[LYRA] len1=24 len2=24
> ----end log.__ffff_127.0.0.1

And the user is logged (just the same we see in the "log.lyra" file
record of above).

> I hope you can see something useful here! Roger

I wish I can understand samba logs (they look like gibberish to me) but
at least we can see the user gets authenticated okay so the problem with
the first of the messages you sent can have another source and not an
auth issue per se but a samba timeout problem... :-?

Make a quick test. Try "smbclient -L servername" but when asked for the
user's password just press [enter] to log anonymously and check if you
get any output differenet than the first one.

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: pan.2011.05.02.13.20.00@gmail.com">http://lists.debian.org/pan.2011.05.02.13.20.00@gmail.com
 
Old 05-03-2011, 01:41 PM
Camaleón
 
Default Problem with Samba on Squeeze

El 2011-05-03 a las 02:50 -0700, Roger Morgan escribió:

(resending to the list, no sensible data on it)

> > From: Camaleón <noelamac@gmail.com>
>
> >
> > Make a quick test. Try "smbclient -L servername" but when asked for the
> > user's password just press [enter] to log anonymously and check if you
> > get any output differenet than the first one.
> >
> Yes, it is different:
>
> ~$ smbclient -L lyra
> Enter roger's password:
> Anonymous login successful

Wow. It logs just fine. So in the end there must be something with
authentication which does not like samba but dunno "what" nor "why" :-?

Sorry, I'm out of ideas :-( and the full logs you sent was not showing
any specific error or warning on the authentication side. Let's see if
someone here can suggest another thing to test...

> Domain=[GALAXY] OS=[Unix] Server=[Samba 3.5.6]
>
> Sharename Type Comment
> --------- ---- -------
> print$ Disk Printer Drivers
> Samsung1510 Printer lyra smbshare
> common Disk lyra smbshare
> IPC$ IPC IPC Service (lyra server)
> Samsung_ML-1510_700 Printer Samsung ML-1510_700
> Anonymous login successful
> Domain=[GALAXY] OS=[Unix] Server=[Samba 3.5.6]
>
> Server Comment
> --------- -------
> LYRA lyra server
>
> Workgroup Master
> --------- -------
> GALAXY LYRA

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110503134138.GA5844@stt008.linux.site">http://lists.debian.org/20110503134138.GA5844@stt008.linux.site
 
Old 05-03-2011, 07:45 PM
Sean Crosby
 
Default Problem with Samba on Squeeze

On Sun, May 1, 2011 at 6:51 AM, Roger Morgan <halbtaxabo-deb@yahoo.com> wrote:

Samba is running but I can't connect to it, and when I do the following test

(from the Samba server):

smbclient -L servername



the response (after entering correct password) is:

----cut here---

Receiving SMB: Server stopped responding

session setup failed: Call timed out: server did not respond after 20000

milliseconds

---end of response--



the Samba programs are running, here's the relevant part of the output of ps -ef

| grep mb

root * * *1969 * * 1 *0 18:13 ? * * * *00:00:00 /usr/sbin/smbd -D

root * * *1983 *1969 *0 18:13 ? * * * *00:00:00 /usr/sbin/smbd -D

root * * *2308 * * 1 *0 18:13 ? * * * *00:00:00 /usr/sbin/nmbd -D



And here's my smb.conf file:

#======================= Global Settings =======================



[global]

* *log file = /var/log/samba/log.%m

* *load printers = yes

* *guest account = leong

add:* * * *map to guest = *Bad User



* *printer = ML-1510_700

* *passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:*

%n
*passwordsupdatedssuccessfully* .

* *obey pam restrictions = yes

* *write list = leong
*Delete write list

* *encrypt passwords = true

* *public = yes

Delete public*
* *passwd program = /usr/bin/passwd %u

* *passdb backend = tdbsam

* *dns proxy = no

* *writeable = yes

Delete writeable*
* *server string = %h server

* *path = /var/common

Delete path*
* *unix password sync = yes

* *workgroup = galaxy

* *comment = lyra smbshare

# * *valid users = leong *(no valid users list means anyone can login)

* *syslog = 0

* *panic action = "" %d

* *max log size = 1000

* *directory mode = 766

Delete directory mode**
* *pam password change = yes



## Browsing/Identification ###



# Change this to the workgroup/NT-domain name your Samba server will part of



# server string is the equivalent of the NT Description field



# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

# * wins support = no



# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; * wins server = w.x.y.z



# This will prevent nmbd to search for NetBIOS names through DNS.



# What naming service and in what order should we use to resolve host names

# to IP addresses

; * name resolve order = lmhosts host wins bcast



#### Networking ####



# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; * interfaces = 127.0.0.0/8 eth0



# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. *However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; * bind interfaces >






#### Debugging/Accounting ####



# This tells Samba to use a separate log file for each machine

# that connects



# Cap the size of the individual log files (in KiB).



# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

# * syslog >


# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.



# Do something sensible when Samba crashes: mail the admin a backtrace





####### Authentication #######



# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

# in the samba-doc package for details.

* security = user



# You may wish to use password encryption. *See the section on

# 'encrypt passwords' in the smb.conf(5) manpage before enabling.



# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.





# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.



# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de>

for

# sending the correct chat script for the passwd program in Debian Sarge).



# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.



########## Domains ###########



# Is this machine able to authenticate users. Both PDC and BDC

# must have this setting enabled. If you are the BDC you must

# change the 'domain master' setting to no

#

; * domain logons = yes

#

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of the user's profile directory

# from the client point of view)

# The following required a [profiles] share to be setup on the

# samba server (see below)

; * logon path = \%Nprofiles\%U

# Another common choice is storing the profile in the user's home directory

# (this is Samba's default)

# * logon path = \%N\%Uprofile



# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

; * logon drive = H:

# * logon home = \%N\%U



# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

; * logon script = logon.cmd



# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe. *The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u



# This allows machine accounts to be created on the domain controller via the

# SAMR RPC pipe.

# The following assumes a "machines" group exists on the system

; add machine script *= /usr/sbin/useradd -g machines -c "%u machine account" -d

/var/lib/samba -s /bin/false %u



# This allows Unix groups to be created on the domain controller via the SAMR

# RPC pipe.

; add group script = /usr/sbin/addgroup --force-badname %g



########## Printing ##########



# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

# * load printers = yes



# lpr(ng) printing. You may wish to override the location of the

# printcap file

; * printing = bsd

; * printcap name = /etc/printcap



# CUPS printing. *See also the cupsaddsmb(8) manpage in the

# cupsys-client package.

; * printing = cups

; * printcap name = cups



############ Misc ############



# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

; * include = /home/samba/etc/smb.conf.%m



# Most people will find that this option gives better performance.

# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

# for details

# You may want to add the following on a Linux system:

# * * * * SO_RCVBUF=8192 SO_SNDBUF=8192

# * socket options = TCP_NODELAY



# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

; * message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &



# Domain Master specifies Samba to be the Domain Master Browser. If this

# machine will be configured as a BDC (a secondary logon server), you

# must set this to 'no'; otherwise, the default behavior is recommended.

# * domain master = auto



# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

; * idmap uid = 10000-20000

; * idmap gid = 10000-20000

; * template shell = /bin/bash



# The following was the default behaviour in sarge,

# but samba upstream reverted the default because it might induce

# performance issues in large organizations.

# See Debian bug #368251 for some of the consequences of *not*

# having this setting and smb.conf(5) for details.

; * winbind enum groups = yes

; * winbind enum users = yes



# Setup usershare options to enable non-root users to share folders

# with the net usershare command.



# Maximum number of usershare. 0 (default) means that usershare is disabled.

; * usershare max shares = 100



#======================= Share Definitions =======================



[homes]

* comment = Home Directories

* browseable = no



# By default, the home directories are exported read-only. Change the

# next parameter to 'no' if you want to be able to write to them.

* read >


# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

* create mask = 0700



# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

* directory mask = 0700



# By default, serverusername shares can be connected to by anyone

# with access to the samba server.

# The following parameter makes sure that only "username" can connect

# to serverusername

# This might need tweaking when using external authentication schemes

* valid users = %S



# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

; * comment = Network Logon Service

; * path = /home/samba/netlogon

; * guest ok = yes

; * read >
; * share modes = no



# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

;[profiles]

; * comment = Users profiles

; * path = /home/samba/profiles

; * guest ok = no

; * browseable = no

; * create mask = 0600

; * directory mask = 0700



[printers]

* *create mask = 0700

* *comment = All Printers

* *browseable = no

* *printable = yes

* *writeable = no

* *path = /var/spool/samba



# Windows clients look for this share name as a source of downloadable

# printer drivers

[print$]

* comment = Printer Drivers

* path = /var/lib/samba/printers

* browseable = yes

* read >
* guest ok = no

# Uncomment to allow remote administration of Windows print drivers.

# You may need to replace 'lpadmin' with the name of the group your

# admin users are members of.

# Please note that you also need to set appropriate Unix permissions

# to the drivers directory for these users to have write rights in it

; * write list = root, @lpadmin



# A sample share for sharing your CD-ROM with others.

;[cdrom]

; * comment = Samba server's CD-ROM

; * read >
; * locking = no

; * path = /media/cdrom

; * guest ok = yes



# The next two parameters show how to auto-mount a CD-ROM when the

# * *cdrom share is accesed. For this to work /etc/fstab must contain

# * *an entry like this:

#

# * * * /dev/scd0 * /cdrom *iso9660 defaults,noauto,ro,user * 0 0

#

# The CD-ROM gets unmounted automatically after the connection to the

#

# If you don't want to use auto-mounting/unmounting make sure the CD

# * *is mounted on /cdrom

#

; * preexec = /bin/mount /cdrom

; * postexec = /bin/umount /cdrom





[Samsung1510]

* *printable = yes



[common]





The reason why I say to delete those lines are because they are associated with shares, not global. I don't know if they work as global options, but given you aren't getting anywhere at the moment, lets delete the lines and see if you get authentication back.
 
Old 05-03-2011, 08:45 PM
Tom H
 
Default Problem with Samba on Squeeze

On Tue, May 3, 2011 at 9:41 AM, Camaleón <noelamac@gmail.com> wrote:
> El 2011-05-03 a las 02:50 -0700, Roger Morgan escribió:


> (resending to the list, no sensible data on it)

I think that you mean "sensitive."


>> > From: Camaleón <noelamac@gmail.com>
>> > Make *a quick test. Try "smbclient -L servername" but when asked for the
>> > user's *password just press [enter] to log anonymously and check if you
>> > get any *output differenet than the first one.
>> >
>> Yes, it is different:
>>
>> ~$ smbclient -L lyra
>> Enter roger's password:
>> Anonymous login successful
>
> Wow. It logs just fine. So in the end there must be something with
> authentication which does not like samba but dunno "what" nor "why" :-?
>
> Sorry, I'm out of ideas :-( and the full logs you sent was not showing
> any specific error or warning on the authentication side. Let's see if
> someone here can suggest another thing to test...
>
>> Domain=[GALAXY] OS=[Unix] Server=[Samba 3.5.6]
>>
>> * * * * Sharename * * * Type * * *Comment
>> * * * * --------- * * * ---- * * *-------
>> * * * * print$ * * * * *Disk * * *Printer Drivers
>> * * * * Samsung1510 * * Printer * lyra smbshare
>> * * * * common * * * * *Disk * * *lyra smbshare
>> * * * * IPC$ * * * * * *IPC * * * IPC Service (lyra server)
>> * * * * Samsung_ML-1510_700 Printer * Samsung ML-1510_700
>> Anonymous login successful
>> Domain=[GALAXY] OS=[Unix] Server=[Samba 3.5.6]
>> * * * * Server * * * * * * * Comment
>> * * * * --------- * * * * * *-------
>> * * * * LYRA * * * * * * * * lyra server
>> * * * * Workgroup * * * * * *Master
>> * * * * --------- * * * * * *-------
>> * * * * GALAXY * * * * * * * LYRA

0. (Unrelated to your problem)
If this is your only samba server, you might want to have
preferred master = yes
local master = yes
domain master = yes
os level = 65
in smb.conf to prevent master browser election

1. Does running "smblient -L 127.0.1.1" make a difference?

2. Does restricting the smb ports to either 139 or 445 with "smb ports
= ..."in smb.conf make a difference?

3. Does "testparm -s" flag any problems?

4. Does "pdbedit -Lv" out output the users that you want to have in
samba? Are the samba users' passwords the same in the system and for
samba?


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BANLkTiniOCO0seeqD7f3thi6aKWD3_v52A@mail.gmail.com ">http://lists.debian.org/BANLkTiniOCO0seeqD7f3thi6aKWD3_v52A@mail.gmail.com
 
Old 05-04-2011, 11:57 AM
Camaleón
 
Default Problem with Samba on Squeeze

On Tue, 03 May 2011 16:45:57 -0400, Tom H wrote:

> On Tue, May 3, 2011 at 9:41 AM, Camaleón <noelamac@gmail.com> wrote:
>> El 2011-05-03 a las 02:50 -0700, Roger Morgan escribió:
>
>
>> (resending to the list, no sensible data on it)
>
> I think that you mean "sensitive."

(...)

Ooops! I did it again :-P

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: pan.2011.05.04.11.57.47@gmail.com">http://lists.debian.org/pan.2011.05.04.11.57.47@gmail.com
 

Thread Tools




All times are GMT. The time now is 04:03 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org