FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 03-11-2011, 01:22 AM
Long Wind
 
Default problem with ati display card

>From looking at the chipset of the card
I believe the card is rage 128 pro
I remove xorg.conf
below is part of output by startx



X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.28-dsa-ia32 i686 Debian
Current Operating System: Linux debian 2.6.32-5-686 #1 SMP Wed Jan 12
04:01:41 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=16bdbaa9-ca3c-457a-8206-a4e2a5908a62 ro quiet
Build Date: 12 January 2011 03:44:48AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 11 10:11:03 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) R128(0): No DFP detected
error setting MTRR (base = 0xd8000000, size = 0x01000000, type = 1)
Invalid argument (22)
(EE) R128(0): R128DRICloseScreen: CCE stop -22
SELinux: Disabled on system, not enabling in X server
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTimHs6Jxnid9Qoc5nFiRYVHc9iyr3h-LO0NL78gi@mail.gmail.com">http://lists.debian.org/AANLkTimHs6Jxnid9Qoc5nFiRYVHc9iyr3h-LO0NL78gi@mail.gmail.com
 
Old 03-11-2011, 02:36 AM
Long Wind
 
Default problem with ati display card

The last reply may have errors because the Chinese government block
google when I send it.
(For the same reason, I maybe unable to reply quickly)
So I re-send it below:


>From looking at the chipset of the card
I believe the card is rage 128 pro
I remove xorg.conf
below is part of output by startx

Build Date: 12 January 2011 03:44:48AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 11 11:24:31 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) R128(0): No DFP detected
error setting MTRR (base = 0xd8000000, size = 0x01000000, type = 1)
Invalid argument (22)
(EE) R128(0): R128DRICloseScreen: CCE stop -22
SELinux: Disabled on system, not enabling in X server
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTikFw7=P2N=yQyQMEG7gvXR+QygAjeCEhAT+jVa9@mail .gmail.com">http://lists.debian.org/AANLkTikFw7=P2N=yQyQMEG7gvXR+QygAjeCEhAT+jVa9@mail .gmail.com
 
Old 03-11-2011, 04:05 AM
Greg Madden
 
Default problem with ati display card

On Thursday 10 March 2011 06:36:38 pm Long Wind wrote:
> The last reply may have errors because the Chinese government block
> google when I send it.
> (For the same reason, I maybe unable to reply quickly)
>
> So I re-send it below:
> >From looking at the chipset of the card
>
> I believe the card is rage 128 pro
> I remove xorg.conf
> below is part of output by startx

The 'ati' driver is the one that 'supposed' to support the Rage 128 Pro. If the
ati driver is present and if the Xorg.0.log file indicates X is trying to use it
and fails I take that as a sign to use the vesa driver. I don't have box to test
that card/driver combo.

The /var/log/Xorg.0.log is the file to read, not sure what is meant by 'output by
startx' screen or ~/Xorg.0.log ?


--
Peace,

Greg


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201103102005.53146.gomadtroll@gci.net">http://lists.debian.org/201103102005.53146.gomadtroll@gci.net
 
Old 03-11-2011, 04:30 AM
Long Wind
 
Default problem with ati display card

the output is by command below:

startx >& output

the output is unlimited, because it prints messages below forever:

(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...

it hangs and I have to shutdown.

other distro can use my display card.
maybe I shall dump debian


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTi=is=zvDTBiH7U3Xx9kHkf6cvcxYnGVKi2QSx7b@mail .gmail.com">http://lists.debian.org/AANLkTi=is=zvDTBiH7U3Xx9kHkf6cvcxYnGVKi2QSx7b@mail .gmail.com
 
Old 03-11-2011, 09:36 AM
Long Wind
 
Default problem with ati display card

I copy /var/log/Xorg.0.log below
it seems that DRI2 is not capable

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.28-dsa-ia32 i686 Debian
Current Operating System: Linux debian 2.6.32-5-686 #1 SMP Wed Jan 12
04:01:41 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=16bdbaa9-ca3c-457a-8206-a4e2a5908a62 ro quiet
Build Date: 12 January 2011 03:44:48AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 11 17:50:14 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5446:1002:0008 ATI Technologies Inc Rage 128
Pro Ultra TF rev 0, Mem @ 0xd8000000/67108864, 0xdfdfc000/16384, I/O @
0x00009800/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for vesa
(II) R128(0): PCI bus 1 card 0 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TF (AGP)" (ChipID = 0x5446)
(--) R128(0): Linear framebuffer at 0xd8000000
(--) R128(0): MMIO registers at 0xdfdfc000
(--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=35000; xclk=13000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 16384 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: PHL Model: e013 Serial#: 263259
(II) R128(0): Year: 2003 Week: 49
(II) R128(0): EDID Version: 1.3
(II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) R128(0): Sync: Separate
(II) R128(0): Max Image Size [cm]: horiz.: 31 vert.: 23
(II) R128(0): Gamma: 2.87
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): First detailed timing not preferred mode in violation of standard!
(II) R128(0): redX: 0.620 redY: 0.350 greenX: 0.290 greenY: 0.610
(II) R128(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297
(II) R128(0): Supported established timings:
(II) R128(0): 720x400@70Hz
(II) R128(0): 640x480@60Hz
(II) R128(0): 640x480@72Hz
(II) R128(0): 640x480@75Hz
(II) R128(0): 800x600@60Hz
(II) R128(0): 800x600@72Hz
(II) R128(0): 800x600@75Hz
(II) R128(0): 832x624@75Hz
(II) R128(0): 1024x768@60Hz
(II) R128(0): 1024x768@70Hz
(II) R128(0): 1024x768@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported standard timings:
(II) R128(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) R128(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) R128(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) R128(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) R128(0): #4: hsize: 640 vsize 480 refresh: 100 vid: 26673
(II) R128(0): #5: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) R128(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) R128(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) R128(0): Supported detailed timing:
(II) R128(0): clock: 25.2 MHz Image Size: 306 x 230 mm
(II) R128(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end
800 h_border: 0
(II) R128(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking:
449 v_border: 0
(II) R128(0): Serial No: BZ 263259
(II) R128(0): Monitor name: PHILIPS 107S5
(II) R128(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71
kHz, PixClock max 115 MHz
(II) R128(0): EDID (in hex):
(II) R128(0): 00ffffffffffff00410c13e05b040400
(II) R128(0): 310d0103681f17bbe8e5b89e594a9c26
(II) R128(0): 10484cadee0031594559615981803168
(II) R128(0): 45688140714fd60980a0205e63101060
(II) R128(0): 520832e61000001a000000ff0020425a
(II) R128(0): 20203236333235390a20000000fc0050
(II) R128(0): 48494c495053203130375335000000fd
(II) R128(0): 0032a01e470b000a202020202020009d
(II) R128(0): EDID vendor "PHL", prod id 57363
(II) R128(0): Using EDID range info for horizontal sync
(II) R128(0): Using EDID range info for vertical refresh
(II) R128(0): Printing DDC gathered Modelines:
(II) R128(0): Modeline "640x350"x0.0 25.18 640 656 752 800 350 387
389 449 +hsync -vsync (31.5 kHz)
(II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481
484 500 -hsync -vsync (37.5 kHz)
(II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489
492 520 -hsync -vsync (37.9 kHz)
(II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz)
(II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412
414 449 -hsync +vsync (31.5 kHz)
(II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328
768 771 777 806 -hsync -vsync (56.5 kHz)
(II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
625 628 667 -hsync -vsync (49.7 kHz)
(II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
601 604 625 +hsync +vsync (46.9 kHz)
(II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600
637 643 666 +hsync +vsync (48.1 kHz)
(II) R128(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481
484 509 -hsync -vsync (43.3 kHz)
(II) R128(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600
601 604 631 +hsync +vsync (53.7 kHz)
(II) R128(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376
768 769 772 808 +hsync +vsync (68.7 kHz)
(II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688
1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) R128(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480
481 484 509 -hsync +vsync (50.9 kHz)
(II) R128(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600
601 604 636 -hsync +vsync (63.6 kHz)
(II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800
960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600
864 865 868 900 +hsync +vsync (67.5 kHz)
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(EE) R128(0): No DFP detected
(II) R128(0): <default monitor>: Using hsync range of 30.00-71.00 kHz
(II) R128(0): <default monitor>: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): <default monitor>: Using maximum pixel clock of 115.00 MHz
(II) R128(0): Estimated virtual size for aspect ratio 1.3478 is 1280x960
(II) R128(0): Clock range: 12.50 to 350.00 MHz
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (height too large for
virtual size)
(II) R128(0): Not using default mode "1280x1024" (height too large for
virtual size)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (height too large for
virtual size)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (width too large for
virtual size)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (width too large for
virtual size)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (width too large for
virtual size)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (width too large for
virtual size)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (width too large for
virtual size)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (width too large for
virtual size)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1360x768" (width too large for
virtual size)
(II) R128(0): Not using default mode "1360x768" (width too large for
virtual size)
(II) R128(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1440x900" (width too large for
virtual size)
(II) R128(0): Not using default mode "1600x1024" (width too large for
virtual size)
(II) R128(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "840x525" (hsync out of range)
(II) R128(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "840x525" (hsync out of range)
(II) R128(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) R128(0): Not using default mode "840x525" (hsync out of range)
(II) R128(0): Not using default mode "1920x1080" (width too large for
virtual size)
(II) R128(0): Not using default mode "1920x1200" (width too large for
virtual size)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (width too large for
virtual size)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (width too large for
virtual size)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (width too large for
virtual size)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (width too large for
virtual size)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using driver mode "1280x1024" (height too large for
virtual size)
(--) R128(0): Virtual size is 1280x960 (pitch 1280)
(**) R128(0): *Driver mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800
960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) R128(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800
960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) R128(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) R128(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600
864 865 868 900 +hsync +vsync (67.5 kHz)
(**) R128(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) R128(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600
864 865 868 900 +hsync +vsync (67.5 kHz)
(**) R128(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) R128(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552
864 865 868 902 -hsync +vsync (67.6 kHz)
(**) R128(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) R128(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536
864 865 868 900 -hsync +vsync (63.0 kHz)
(**) R128(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) R128(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520
864 865 868 895 -hsync +vsync (53.7 kHz)
(**) R128(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376
768 769 772 808 +hsync +vsync (68.7 kHz)
(**) R128(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(**) R128(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328
768 771 777 806 -hsync -vsync (56.5 kHz)
(**) R128(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(**) R128(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376
768 769 772 808 +hsync +vsync (68.7 kHz)
(**) R128(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(**) R128(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328
768 771 777 806 -hsync -vsync (56.5 kHz)
(**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(**) R128(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) R128(0): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264
768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) R128(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624
625 628 667 -hsync -vsync (49.7 kHz)
(**) R128(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624
625 628 667 -hsync -vsync (49.7 kHz)
(**) R128(0): *Driver mode "800x600": 68.2 MHz, 63.6 kHz, 100.0 Hz
(II) R128(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600
601 604 636 -hsync +vsync (63.6 kHz)
(**) R128(0): *Driver mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600
601 604 631 +hsync +vsync (53.7 kHz)
(**) R128(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600
601 604 625 +hsync +vsync (46.9 kHz)
(**) R128(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600
637 643 666 +hsync +vsync (48.1 kHz)
(**) R128(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600
601 604 631 +hsync +vsync (53.7 kHz)
(**) R128(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600
601 604 625 +hsync +vsync (46.9 kHz)
(**) R128(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600
637 643 666 +hsync +vsync (48.1 kHz)
(**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525
526 529 544 doublescan -hsync +vsync (65.3 kHz)
(**) R128(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525
526 532 541 doublescan +hsync +vsync (64.9 kHz)
(**) R128(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512
512 514 533 doublescan +hsync +vsync (64.0 kHz)
(**) R128(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) R128(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450
451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) R128(0): *Driver mode "640x480": 43.2 MHz, 50.9 kHz, 100.0 Hz
(II) R128(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480
481 484 509 -hsync +vsync (50.9 kHz)
(**) R128(0): *Driver mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480
481 484 509 -hsync -vsync (43.3 kHz)
(**) R128(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480
481 484 500 -hsync -vsync (37.5 kHz)
(**) R128(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480
489 492 520 -hsync -vsync (37.9 kHz)
(**) R128(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(**) R128(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480
481 484 509 -hsync -vsync (43.3 kHz)
(**) R128(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480
481 484 500 -hsync -vsync (37.5 kHz)
(**) R128(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480
489 492 520 -hsync -vsync (37.9 kHz)
(**) R128(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480
480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(**) R128(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) R128(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400
412 414 449 -hsync +vsync (31.5 kHz)
(**) R128(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) R128(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400
401 404 446 -hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384
385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) R128(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) R128(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384
385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) R128(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400
401 404 445 -hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432
432 434 450 doublescan +hsync +vsync (67.5 kHz)
(**) R128(0): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432
432 434 451 doublescan -hsync +vsync (67.6 kHz)
(**) R128(0): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) R128(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432
432 434 450 doublescan -hsync +vsync (63.0 kHz)
(**) R128(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432
432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) R128(0): *Driver mode "640x350": 25.2 MHz, 31.5 kHz, 70.1 Hz
(II) R128(0): Modeline "640x350"x70.1 25.18 640 656 752 800 350
387 389 449 +hsync -vsync (31.5 kHz)
(**) R128(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350
382 385 445 +hsync -vsync (37.9 kHz)
(**) R128(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) R128(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384
384 386 404 doublescan +hsync +vsync (68.7 kHz)
(**) R128(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384
384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) R128(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) R128(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384
385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) R128(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384
385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) R128(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) R128(0): Modeline "512x384"x86.6 22.45 512 516 604 632 384
384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
(**) R128(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) R128(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312
312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) R128(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300
300 302 315 doublescan +hsync +vsync (53.7 kHz)
(**) R128(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) R128(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300
300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) R128(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) R128(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300
318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300
300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300
300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) R128(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240
240 242 254 doublescan -hsync -vsync (43.3 kHz)
(**) R128(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240
240 242 250 doublescan -hsync -vsync (37.5 kHz)
(**) R128(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) R128(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240
244 246 260 doublescan -hsync -vsync (37.9 kHz)
(**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240
245 246 262 doublescan -hsync -vsync (31.5 kHz)
(**) R128(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) R128(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200
200 202 223 doublescan -hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200
200 202 222 doublescan -hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "320x175"x85.3 15.75 320 336 368 416 175
191 192 222 doublescan +hsync -vsync (37.9 kHz)
(**) R128(0): Display dimensions: (310, 230) mm
(**) R128(0): DPI set to (104, 106)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "r128" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0xd8000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x1f000211 [AGP 0x8086/0x1a30; Card 0x1002/0x5446]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0xe0000000
(II) R128(0): [agp] Ring mapped at 0xb7270000
(II) R128(0): [agp] ring read ptr handle = 0xe0101000
(II) R128(0): [agp] Ring read ptr mapped at 0xb77fc000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0xb5f87000
(II) R128(0): [agp] AGP texture map handle = 0xe0302000
(II) R128(0): [agp] AGP Texture map mapped at 0xb5aa7000
(II) R128(0): [drm] register handle = 0xdfdfc000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1280,3276)
(II) R128(0): Reserved area from (0,960) to (1280,962)
(II) R128(0): Largest offscreen area available: 1280 x 2314
(II) R128(0): Reserved back buffer from (0,962) to (1280,1922)
(II) R128(0): Reserved depth buffer from (0,1922) to (1280,2883)
(II) R128(0): Reserved depth span from (0,2882) offset 0xe12800
(II) R128(0): Reserved 0 kb for textures at offset 0xfff000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
30 128x128 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 11532)
(II) R128(0): Largest offscreen area available: 1280 x 391
(==) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(EE) R128(0): R128DRICloseScreen: CCE stop -22
(II) R128(0): [drm] removed 1 reserved context for kernel
(II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xd4896000 at 0xb73c3000
(II) R128(0): [drm] Closed DRM master.
(WW) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTim9PN2wCjzXayZM_KKdhrZUwBqephxTNb2Om8sd@mail .gmail.com">http://lists.debian.org/AANLkTim9PN2wCjzXayZM_KKdhrZUwBqephxTNb2Om8sd@mail .gmail.com
 

Thread Tools




All times are GMT. The time now is 05:48 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org