FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 03-10-2011, 11:34 PM
Liam Cassidey
 
Default unable to install nfs-kernel-server

On Thu, Mar 10, 2011 at 8:27 AM, Tom H <tomh0665@gmail.com> wrote:


On Wed, Mar 9, 2011 at 9:43 PM, Brian <btmick@gmail.com> wrote:

> On Wed, Mar 9, 2011 at 1:19 PM, Tom H <tomh0665@gmail.com> wrote:

>> On Wed, Mar 9, 2011 at 2:28 AM, Scott Ferguson

>> <prettyfly.productions@gmail.com> wrote:

>>> On 09/03/11 17:45, Liam Cassidey wrote:

>>>>

>>>> I've removed all entries from /etc/exports, have portmap and nfs-common

>>>> running, the firewall down, have an empty /etc/hosts.deny and a single

>>>> entry in hosts.allow (taken from the portmap man page):

>>>

>>> perhaps you could try something like this for hosts.allow

>>> nfsd: 192.168.x.y/255.255.255.255

>>> rpcbind: 192.168.x.y/255.255.255.255

>>> mountd: 192.168.x.y/255.255.255.255

>>

>> Or test first with an empty "/etc/hosts.allow".

>

> So I've tested it with an empty /etc/hosts.allow, one with ALL: ALL and I

> feel like every incarnation involving nfsd, rpcbind, mountd, portmap and

> various ip's and masks. None seem to make any difference to the results I'm

> seeing so far -- still the same old "svc: failed to register lockdv1 RPC

> service (errno 13)." error.

>

> Also, iptables has been completely disabled so there shouldn't be anything

> at the network layer blocking it.

>

> It's been suggested that their may be a bug in the version of nfs-common I'm

> using. I have version 1:1.2.2-4 installed and it appears, at least according

> to http://packages.debian.org/search?keywords=nfs-common, that this same

> version is also in stable. So I guess my next question is: has anyone had

> luck running an nfs server on any system since lenny? If so, what versions

> of the 3 (portmap, nfs-common, and nfs-kernel-server) are you running and

> with what kind of configuration?



I have that version running in production on stable. I've also just

duped and upgraded a VM to unstable and it's also running fine.



nfs-kernel-server and nfs-common are 1:1.2.2-4. portmap is 6.0.0-2.



Do you compile your own kernels?




No, I didn't compile this kernel -- it's version 2.6.32-5-686 (Debian2.6.32-21).
I've attached a copy of dmesg.


After starting portmap, then nfs-common, then nfs-kernel-server, the followingmessages appear:
/var/log/messages:Mar 10 19:29:18 server portmap: Removing stale lockfile for pid 966

Mar 10 19:29:34 server kernel: [ *561.636331] svc: failed to register lockdv1 RPC service (errno 13).
/var/log/syslog:Mar 10 19:29:18 server portmap: Removing stale lockfile for pid 966

Mar 10 19:29:24 server rpc.statd[2287]: Version 1.2.2 startingMar 10 19:29:24 server sm-notify[2288]: Version 1.2.2 startingMar 10 19:29:24 server sm-notify[2288]: Already notifying clients; Exiting!

Mar 10 19:29:34 server kernel: [ *561.636331] svc: failed to register lockdv1 RPC service (errno 13).
And rpcinfo -p reports the following:server:~# rpcinfo -p** program vers proto * port

** *100000 * *2 * tcp * *111 *portmapper** *100000 * *2 * udp * *111 *portmapper** *100024 * *1 * udp *59745 *status** *100024 * *1 * tcp *51755 *statusserver:~#


And here are the versions of the packages:server:~# dpkg -l portmap nfs-common nfs-kernel-serverDesired=Unknown/Install/Remove/Purge/Hold| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend

|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)||/ Name * * * * * * * * * * * * *Version * * * * * * * * * * * Description+++-=============================-=============================-================================================== ========================

ii *nfs-common * * * * * * * * * *1:1.2.2-4 * * * * * * * * * * NFS support files common to client and serveriF *nfs-kernel-server * * * * * * 1:1.2.2-4 * * * * * * * * * * support for NFS kernel server

ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapperserver:~#

What does rpcinfo -p report for you guys?

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 14:28:12 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe8cc00 (usable)
[ 0.000000] BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fe8ec00 - 000000007fe90c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe90c00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7fe8c max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 36e30000 - 3770f17d
[ 0.000000] Allocated new RAMDISK: 00100000 - 009df17d
[ 0.000000] Move RAMDISK from 0000000036e30000 - 000000003770f17c to 00100000 - 009df17c
[ 0.000000] ACPI: RSDP 000febf0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fccb4 0003C (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 000fccf0 00074 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT fffc7525 02AEE (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 7fe8cc00 00040
[ 0.000000] ACPI: SSDT fffca013 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fcd64 00072 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fcdd6 00028 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: MCFG 000fcdfe 0003E (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: HPET 000fce3c 00038 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c6b94] TEXT DATA BSS ==> [0001000000 - 00014c6b94]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014c7000 - 00014cd164] BRK ==> [00014c7000 - 00014cd164]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00009df17d] NEW RAMDISK ==> [0000100000 - 00009df17d]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fe8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0007fe8c
[ 0.000000] On node 0 totalpages: 523820
[ 0.000000] free_area_init_node: node 0, pgdat c13b26e0, node_mem_map c14cf000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295288 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519726
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=/dev/mapper/server-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fe8c)
[ 0.000000] Memory: 2062700k/2095664k available (2496k kernel code, 31492k reserved, 1328k data, 368k init, 1190456k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc1419000 ( 368 kB)
[ 0.000000] .data : 0xc1270259 - 0xc13bc260 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270259 (2496 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3391.019 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6782.03 BogoMIPS (lpj=13564076)
[ 0.004022] Security Framework initialized
[ 0.004028] SELinux: Disabled at boot.
[ 0.004036] Mount-cache hash table entries: 512
[ 0.004168] Initializing cgroup subsys ns
[ 0.004173] Initializing cgroup subsys cpuacct
[ 0.004178] Initializing cgroup subsys devices
[ 0.004180] Initializing cgroup subsys freezer
[ 0.004183] Initializing cgroup subsys net_cls
[ 0.004209] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004212] CPU: L2 cache: 2048K
[ 0.004215] CPU: Physical Processor ID: 0
[ 0.004217] CPU: Processor Core ID: 0
[ 0.004220] mce: CPU supports 4 MCE banks
[ 0.004232] CPU0: Thermal monitoring enabled (TM1)
[ 0.004236] using mwait in idle threads.
[ 0.004245] Performance Events: no PMU driver, software events only.
[ 0.004252] Checking 'hlt' instruction... OK.
[ 0.021353] ACPI: Core revision 20090903
[ 0.066094] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.066423] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.106110] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
[ 0.108001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.192056] CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
[ 0.192071] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.196067] Brought up 2 CPUs
[ 0.196072] Total of 2 processors activated (13565.05 BogoMIPS).
[ 0.196518] CPU0 attaching sched-domain:
[ 0.196523] domain 0: span 0-1 level SIBLING
[ 0.196526] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.196533] domain 1: span 0-1 level MC
[ 0.196536] groups: 0-1 (cpu_power = 1178)
[ 0.196543] CPU1 attaching sched-domain:
[ 0.196545] domain 0: span 0-1 level SIBLING
[ 0.196548] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.196553] domain 1: span 0-1 level MC
[ 0.196556] groups: 0-1 (cpu_power = 1178)
[ 0.196677] devtmpfs: initialized
[ 0.196677] regulator: core version 0.5
[ 0.196677] NET: Registered protocol family 16
[ 0.196677] ACPI: bus type pci registered
[ 0.196677] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.196677] PCI: MCFG area at e0000000 reserved in E820
[ 0.196677] PCI: Using MMCONFIG for extended config space
[ 0.196677] PCI: Using configuration type 1 for base access
[ 0.196677] bio: create slab <bio-0> at 0
[ 0.196677] ACPI: EC: Look up EC in DSDT
[ 0.222579] ACPI: Interpreter enabled
[ 0.222585] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.222612] ACPI: Using IOAPIC for interrupt routing
[ 0.256150] ACPI: No dock devices found.
[ 0.258966] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.259086] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.259090] pci 0000:00:01.0: PME# disabled
[ 0.259178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259183] pci 0000:00:1c.0: PME# disabled
[ 0.259249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.259254] pci 0000:00:1c.1: PME# disabled
[ 0.259306] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.259356] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.259407] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.259456] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
[ 0.259512] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.259564] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.259569] pci 0000:00:1d.7: PME# disabled
[ 0.259682] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.259687] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.259692] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
[ 0.259696] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
[ 0.259721] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.259729] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.259736] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.259743] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.259750] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.259793] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.259800] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.259806] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.259812] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.259819] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
[ 0.259826] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdffffc00-0xdfffffff]
[ 0.259846] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.259850] pci 0000:00:1f.2: PME# disabled
[ 0.259897] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[ 0.259956] pci 0000:01:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
[ 0.259966] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.259976] pci 0000:01:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff]
[ 0.259985] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[ 0.260042] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.260100] pci 0000:00:01.0: bridge 32bit mmio: [0xdd000000-0xdfefffff]
[ 0.260104] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.260169] pci 0000:02:00.0: reg 10 64bit mmio: [0xdcff0000-0xdcffffff]
[ 0.260243] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.260249] pci 0000:02:00.0: PME# disabled
[ 0.260280] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.260355] pci 0000:00:1c.0: bridge 32bit mmio: [0xdcf00000-0xdcffffff]
[ 0.260402] pci 0000:00:1c.1: bridge 32bit mmio: [0xdce00000-0xdcefffff]
[ 0.260444] pci 0000:04:00.0: reg 10 io port: [0xd460-0xd46f]
[ 0.260452] pci 0000:04:00.0: reg 14 io port: [0xd470-0xd47f]
[ 0.260460] pci 0000:04:00.0: reg 18 io port: [0xd480-0xd48f]
[ 0.260468] pci 0000:04:00.0: reg 1c io port: [0xd490-0xd49f]
[ 0.260475] pci 0000:04:00.0: reg 20 io port: [0xd4a0-0xd4bf]
[ 0.260483] pci 0000:04:00.0: reg 24 io port: [0xd800-0xd8ff]
[ 0.260491] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xdcd00000-0xdcd0ffff]
[ 0.260550] pci 0000:04:01.0: reg 10 io port: [0xd4c0-0xd4ff]
[ 0.260599] pci 0000:04:01.0: supports D1 D2
[ 0.260633] pci 0000:04:01.1: reg 10 io port: [0xd458-0xd45f]
[ 0.260681] pci 0000:04:01.1: supports D1 D2
[ 0.260717] pci 0000:04:01.2: reg 10 32bit mmio: [0xdccfa800-0xdccfafff]
[ 0.260726] pci 0000:04:01.2: reg 14 32bit mmio: [0xdccfc000-0xdccfffff]
[ 0.260771] pci 0000:04:01.2: supports D1 D2
[ 0.260774] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.260779] pci 0000:04:01.2: PME# disabled
[ 0.260829] pci 0000:04:02.0: reg 10 32bit mmio: [0xdccfb000-0xdccfbfff]
[ 0.260837] pci 0000:04:02.0: reg 14 io port: [0xdc00-0xdcff]
[ 0.260885] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 0.260890] pci 0000:04:02.0: PME# disabled
[ 0.260940] pci 0000:00:1e.0: transparent bridge
[ 0.260945] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.260950] pci 0000:00:1e.0: bridge 32bit mmio: [0xdcc00000-0xdcdfffff]
[ 0.260972] pci_bus 0000:00: on NUMA node 0
[ 0.260977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.261255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.261579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.261751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.261922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.517603] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.517931] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.518257] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.518578] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.518903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.519228] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.519551] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.519878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.520060] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.520067] vgaarb: loaded
[ 0.520103] PCI: Using ACPI for IRQ routing
[ 0.520231] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.520240] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.524022] Switching to clocksource tsc
[ 0.525471] pnp: PnP ACPI init
[ 0.525486] ACPI: bus type pnp registered
[ 0.529857] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.529862] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.547763] pnp: PnP ACPI: found 12 devices
[ 0.547767] ACPI: ACPI bus type pnp unregistered
[ 0.547773] PnPBIOS: Disabled by ACPI PNP
[ 0.547785] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 0.547795] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.547799] system 00:09: iomem range 0x100000-0xffffff could not be reserved
[ 0.547803] system 00:09: iomem range 0x1000000-0x7fe8cbff could not be reserved
[ 0.547806] system 00:09: iomem range 0xc0000-0xfffff could not be reserved
[ 0.547810] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.547814] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.547817] system 00:09: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.547821] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.547824] system 00:09: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.547831] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.547835] system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 0.582615] pci 0000:04:00.0: BAR 6: address space collision on of device [0xdcd00000-0xdcd0ffff]
[ 0.582689] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.582692] pci 0000:00:01.0: IO window: disabled
[ 0.582697] pci 0000:00:01.0: MEM window: 0xdd000000-0xdfefffff
[ 0.582701] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
[ 0.582707] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.582711] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.582716] pci 0000:00:1c.0: MEM window: 0xdcf00000-0xdcffffff
[ 0.582721] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.582728] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.582732] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.582737] pci 0000:00:1c.1: MEM window: 0xdce00000-0xdcefffff
[ 0.582742] pci 0000:00:1c.1: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.582750] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.582754] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.582760] pci 0000:00:1e.0: MEM window: 0xdcc00000-0xdcdfffff
[ 0.582765] pci 0000:00:1e.0: PREFETCH window: 0x80400000-0x804fffff
[ 0.582782] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.582787] pci 0000:00:01.0: setting latency timer to 64
[ 0.582797] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.582801] pci 0000:00:1c.0: setting latency timer to 64
[ 0.582812] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.582816] pci 0000:00:1c.1: setting latency timer to 64
[ 0.582824] pci 0000:00:1e.0: setting latency timer to 64
[ 0.582829] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.582832] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.582836] pci_bus 0000:01: resource 1 mem: [0xdd000000-0xdfefffff]
[ 0.582839] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.582842] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.582845] pci_bus 0000:02: resource 1 mem: [0xdcf00000-0xdcffffff]
[ 0.582849] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.582852] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.582855] pci_bus 0000:03: resource 1 mem: [0xdce00000-0xdcefffff]
[ 0.582858] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.582862] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.582865] pci_bus 0000:04: resource 1 mem: [0xdcc00000-0xdcdfffff]
[ 0.582868] pci_bus 0000:04: resource 2 pref mem [0x80400000-0x804fffff]
[ 0.582871] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.582875] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.582908] NET: Registered protocol family 2
[ 0.583008] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.583370] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.583822] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.584047] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.584050] TCP reno registered
[ 0.584141] NET: Registered protocol family 1
[ 0.584253] pci 0000:01:00.0: Boot video device
[ 0.584320] Unpacking initramfs...
[ 0.863925] Freeing initrd memory: 9084k freed
[ 0.868919] Simple Boot Flag at 0x7a set to 0x1
[ 0.869222] audit: initializing netlink socket (disabled)
[ 0.869237] type=2000 audit(1299802813.867:1): initialized
[ 0.872430] highmem bounce pool size: 64 pages
[ 0.872436] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.874092] VFS: Disk quotas dquot_6.5.2
[ 0.874155] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.874243] msgmni has been set to 1723
[ 0.874487] alg: No test for stdrng (krng)
[ 0.874550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.874554] io scheduler noop registered
[ 0.874556] io scheduler anticipatory registered
[ 0.874558] io scheduler deadline registered
[ 0.874599] io scheduler cfq registered (default)
[ 0.874732] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.874740] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.874851] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.874860] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.874989] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.874998] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.875182] isapnp: Scanning for PnP cards...
[ 1.228195] isapnp: No Plug & Play device found
[ 1.229969] Linux agpgart interface v0.103
[ 1.230115] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.230218] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.230575] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.230682] serial 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.230820] 0000:04:02.0: ttyS1 at I/O 0xdc08 (irq = 18) is a 16450
[ 1.230909] 0000:04:02.0: ttyS2 at I/O 0xdc10 (irq = 18) is a 8250
[ 1.230998] 0000:04:02.0: ttyS3 at I/O 0xdc18 (irq = 18) is a 16450
[ 1.231028] Couldn't register serial port 0000:04:02.0: -28
[ 1.231109] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 1.231112] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.231789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.231871] mice: PS/2 mouse device common for all mice
[ 1.231931] rtc_cmos 00:05: RTC can wake from S4
[ 1.231970] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.232015] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.232029] cpuidle: using governor ladder
[ 1.232032] cpuidle: using governor menu
[ 1.232038] No iBFT detected.
[ 1.232435] TCP cubic registered
[ 1.232568] NET: Registered protocol family 10
[ 1.233156] lo: Disabled Privacy Extensions
[ 1.233580] Mobile IPv6
[ 1.233584] NET: Registered protocol family 17
[ 1.233599] Using IPI No-Shortcut mode
[ 1.233683] PM: Resume from disk failed.
[ 1.233695] registered taskstats version 1
[ 1.234055] rtc_cmos 00:05: setting system clock to 2011-03-11 00:20:14 UTC (1299802814)
[ 1.234096] Initalizing network drop monitor service
[ 1.234127] Freeing unused kernel memory: 368k freed
[ 1.234366] Write protecting the kernel text: 2500k
[ 1.234389] Write protecting the kernel read-only data: 920k
[ 1.253245] udev: starting version 161
[ 1.264949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.409096] SCSI subsystem initialized
[ 1.439044] usbcore: registered new interface driver usbfs
[ 1.439131] usbcore: registered new interface driver hub
[ 1.439261] usbcore: registered new device driver usb
[ 1.465567] libata version 3.00 loaded.
[ 1.467333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.467383] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.467404] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.467410] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.467440] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.467474] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.471258] sata_via 0000:04:00.0: version 2.4
[ 1.471275] sata_via 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.471321] sata_via 0000:04:00.0: routed to hard irq line 11
[ 1.471369] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.471618] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 1.475550] scsi0 : sata_via
[ 1.475766] scsi1 : sata_via
[ 1.475914] scsi2 : sata_via
[ 1.475977] ata1: SATA max UDMA/133 port i16@0xd460 bmdma 0xd4a0 irq 16
[ 1.475983] ata2: SATA max UDMA/133 port i16@0xd470 bmdma 0xd4a8 irq 16
[ 1.475987] ata3: PATA max UDMA/133 port i16@0xd480 bmdma 0xd4b0 irq 16
[ 1.484530] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.484565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.484570] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.484575] usb usb1: Product: EHCI Host Controller
[ 1.484579] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.484582] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.484711] usb usb1: configuration #1 chosen from 1 choice
[ 1.484763] hub 1-0:1.0: USB hub found
[ 1.484774] hub 1-0:1.0: 8 ports detected
[ 1.484883] ata_piix 0000:00:1f.1: version 2.13
[ 1.484899] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.484948] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.485024] scsi3 : ata_piix
[ 1.485105] scsi4 : ata_piix
[ 1.485164] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.485169] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.485202] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.485220] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.485440] ata5: port disabled. ignoring.
[ 1.491254] tg3.c:v3.102 (September 1, 2009)
[ 1.491275] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.491286] tg3 0000:02:00.0: setting latency timer to 64
[ 1.491431] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.509043] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:11:d2:81:15
[ 1.509048] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.509051] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.509054] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.640029] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.640298] scsi5 : ata_piix
[ 1.640449] scsi6 : ata_piix
[ 1.640499] ata6: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
[ 1.640509] ata7: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
[ 1.640573] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.640582] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.640586] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.640599] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.640627] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 1.640668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.640671] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640674] usb usb2: Product: UHCI Host Controller
[ 1.640677] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.640679] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.640764] usb usb2: configuration #1 chosen from 1 choice
[ 1.640801] hub 2-0:1.0: USB hub found
[ 1.640809] hub 2-0:1.0: 2 ports detected
[ 1.640869] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.640876] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.640879] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.640888] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.640919] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 1.640953] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.640956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640959] usb usb3: Product: UHCI Host Controller
[ 1.640961] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.640964] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.641032] usb usb3: configuration #1 chosen from 1 choice
[ 1.641064] hub 3-0:1.0: USB hub found
[ 1.641072] hub 3-0:1.0: 2 ports detected
[ 1.641126] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.641132] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.641136] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.641152] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.641183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.641221] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.641224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.641227] usb usb4: Product: UHCI Host Controller
[ 1.641229] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.641232] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.641298] usb usb4: configuration #1 chosen from 1 choice
[ 1.641332] hub 4-0:1.0: USB hub found
[ 1.641341] hub 4-0:1.0: 2 ports detected
[ 1.641397] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.641404] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.641408] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.641418] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.641448] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 1.641484] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.641487] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.641490] usb usb5: Product: UHCI Host Controller
[ 1.641492] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.641495] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.641562] usb usb5: configuration #1 chosen from 1 choice
[ 1.641595] hub 5-0:1.0: USB hub found
[ 1.641603] hub 5-0:1.0: 2 ports detected
[ 1.649439] ata4.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33
[ 1.649483] ata4.01: ATAPI: PHILIPS DVD+/-RW DVD8631, CD21, max UDMA/33
[ 1.656867] ata4.00: configured for UDMA/33
[ 1.672990] ata4.01: configured for UDMA/33
[ 1.796159] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.807217] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.807858] ata6.00: ATA-6: ST3160023AS, 8.12, max UDMA/133
[ 1.807863] ata6.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.808336] ata7.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 1.808340] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.820571] ata7.00: configured for UDMA/133
[ 1.820612] ata6.00: configured for UDMA/133
[ 1.928372] usb 1-3: New USB device found, idVendor=0424, idProduct=2504
[ 1.928376] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.928464] usb 1-3: configuration #1 chosen from 1 choice
[ 1.928809] hub 1-3:1.0: USB hub found
[ 1.928892] hub 1-3:1.0: 4 ports detected
[ 2.040024] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 2.134969] ata2: SATA link down (SStatus 0 SControl 310)
[ 2.172906] usb 1-4: New USB device found, idVendor=0bc2, idProduct=3300
[ 2.172910] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.172913] usb 1-4: Product: Desktop
[ 2.172915] usb 1-4: Manufacturer: Seagate
[ 2.172918] usb 1-4: SerialNumber: 2GHMWR56
[ 2.172993] usb 1-4: configuration #1 chosen from 1 choice
[ 2.181897] Initializing USB Mass Storage driver...
[ 2.182052] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2.182201] usb-storage: device found at 3
[ 2.182206] usb-storage: waiting for device to settle before scanning
[ 2.182221] usbcore: registered new interface driver usb-storage
[ 2.182226] USB Mass Storage support registered.
[ 2.300066] scsi 3:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5
[ 2.302463] scsi 3:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8631 CD21 PQ: 0 ANSI: 5
[ 2.302720] scsi 5:0:0:0: Direct-Access ATA ST3160023AS 8.12 PQ: 0 ANSI: 5
[ 2.302923] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 2.305692] firewire_ohci 0000:04:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.333354] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 2.333359] Uniform CD-ROM driver Revision: 3.20
[ 2.333679] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.341029] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.341338] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 2.341656] sd 5:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
[ 2.341757] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.341922] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.341928] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.341953] sd 5:0:0:0: [sda] Write Protect is off
[ 2.341958] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.341996] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.342071] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.342338] sda:
[ 2.342422] sdb: sdb1
[ 2.357836] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.361596] sda1 sda2
[ 2.362126] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.371234] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 2.371553] sr 3:0:1:0: Attached scsi generic sg1 type 5
[ 2.371671] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.371858] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.376521] firewire_ohci: Added fw-ohci device 0000:04:01.2, OHCI version 1.10
[ 2.624443] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 2.655117] device-mapper: uevent: version 1.0.3
[ 2.655430] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.778831] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.780357] SGI XFS Quota Management subsystem
[ 2.785884] XFS mounting filesystem dm-0
[ 2.799651] usb 5-2: New USB device found, idVendor=046d, idProduct=c016
[ 2.799655] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.799658] usb 5-2: Product: Optical USB Mouse
[ 2.799661] usb 5-2: Manufacturer: Logitech
[ 2.799764] usb 5-2: configuration #1 chosen from 1 choice
[ 2.814832] usbcore: registered new interface driver hiddev
[ 2.827877] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input1
[ 2.827968] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.3-2/input0
[ 2.827991] usbcore: registered new interface driver usbhid
[ 2.827995] usbhid: v2.6:USB HID core driver
[ 2.876086] firewire_core: created device fw0: GUID 00023c019104cf1b, S400
[ 2.927972] Ending clean XFS mount for filesystem: dm-0
[ 4.923746] udev[356]: starting version 166
[ 5.450520] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.450538] ACPI: Power Button [VBTN]
[ 5.450662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.450670] ACPI: Power Button [PWRF]
[ 5.555095] processor LNXCPU:00: registered as cooling_device0
[ 5.555400] processor LNXCPU:01: registered as cooling_device1
[ 5.883623] intel_rng: Firmware space is locked read-only. If you can't or
[ 5.883625] intel_rng: don't want to disable this in firmware setup, and if
[ 5.883627] intel_rng: you are certain that your system has a functional
[ 5.883628] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 5.951034] gameport: EMU10K1 is pci0000:04:01.1/gameport0, io 0xd458, speed 466kHz
[ 5.986552] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.986611] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.175818] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.238785] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.264718] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.924579] nvidia: module license 'NVIDIA' taints kernel.
[ 6.924584] Disabling lock debugging due to kernel taint
[ 7.180656] usb-storage: device scan complete
[ 7.181145] scsi 7:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
[ 7.181989] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 7.183378] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.183998] sd 7:0:0:0: [sdc] Write Protect is off
[ 7.184005] sd 7:0:0:0: [sdc] Mode Sense: 2f 08 00 00
[ 7.184009] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 7.185376] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 7.185417] sdc: sdc1
[ 7.208377] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 7.208416] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 7.895969] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.895981] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.895987] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=nonew ns=io+mem
[ 7.896273] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.31 Tue Jun 1 22:08:27 PDT 2010
[ 8.053320] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.101572] EMU10K1_Audigy 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.101655] BUG: unable to handle kernel paging request at 6406f297
[ 8.101747] IP: [<c10896e9>] zone_watermark_ok+0x5c/0x9d
[ 8.101814] *pde = 00000000
[ 8.101872] Oops: 0000 [#1] SMP
[ 8.101957] last sysfs file: /sys/devices/platform/pcspkr/input/input4/event4/uevent
[ 8.101993] Modules linked in: snd_emu10k1(+) snd_rawmidi snd_ac97_codec ac97_bus snd_seq_device snd_util_mem nvidia(P) snd_pcm snd_timer snd_page_alloc dcdbas i2c_i801 snd_hwdep pcspkr parport_pc snd emu10k1_gp gameport rng_core i2c_core parport evdev soundcore processor button usbhid hid xfs exportfs dm_mod sg sd_mod sr_mod crc_t10dif cdrom ata_generic firewire_ohci usb_storage ahci uhci_hcd tg3 ata_piix firewire_core sata_via ehci_hcd libata usbcore libphy scsi_mod crc_itu_t nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 8.103568]
[ 8.103607] Pid: 567, comm: modprobe Tainted: P (2.6.32-5-686 #1) Dimension 8400
[ 8.103658] EIP: 0060:[<c10896e9>] EFLAGS: 00010246 CPU: 0
[ 8.103699] EIP is at zone_watermark_ok+0x5c/0x9d
[ 8.103740] EAX: e8bb01a3 EBX: c11aebff ECX: 00000000 EDX: 2079c085
[ 8.103781] ESI: 00000000 EDI: 00000000 EBP: 5356c789 ESP: f6035d50
[ 8.103822] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 8.103863] Process modprobe (pid: 567, ti=f6034000 task=f60d1540 task.ti=f6034000)
[ 8.103911] Stack:
[ 8.103948] f6fa1540 2079c085 f669d800 f6fa1480 f6035dc0 00000000 000002d4 f6c56000
[ 8.104003] <0> c108b1f0 e8bb01a3 00000041 f6035d98 00000000 f6035d98 e8bb01a3 00000000
[ 8.104003] <0> 00000000 000202d4 c13b538c 00314b30 00000000 00000000 00000000 00000000
[ 8.104003] Call Trace:
[ 8.104003] [<c108b1f0>] ? get_page_from_freelist+0xc0/0x3c7
[ 8.104003] [<c11aebff>] ? pci_hp_diva_setup+0x0/0x6b
[ 8.104003] [<c108b7b8>] ? __alloc_pages_nodemask+0xf3/0x4e0
[ 8.104003] [<c11aebff>] ? pci_hp_diva_setup+0x0/0x6b
[ 8.104003] [<c10ae2f9>] ? __kmalloc+0x11c/0x128
[ 8.104003] [<fa0390ca>] ? __snd_util_memblk_new+0x19/0x56 [snd_util_mem]
[ 8.104003] [<c11aebff>] ? pci_hp_diva_setup+0x0/0x6b
[ 8.104003] [<fa18b3c3>] ? snd_emu10k1_synth_alloc+0xd2/0x1d3 [snd_emu10k1]
[ 8.104003] [<fa19395e>] ? snd_emu10k1_create+0x4ca/0x5fb [snd_emu10k1]
[ 8.104003] [<f8aff3f4>] ? snd_card_create+0x28d/0x2f5 [snd]
[ 8.104003] [<fa193248>] ? snd_card_emu10k1_probe+0xd2/0x31e [snd_emu10k1]
[ 8.104003] [<c11456b5>] ? local_pci_probe+0xb/0xc
[ 8.104003] [<c1145fff>] ? pci_device_probe+0x41/0x63
[ 8.104003] [<c11b1f82>] ? driver_probe_device+0x8a/0x11e
[ 8.104003] [<c11b2056>] ? __driver_attach+0x40/0x5b
[ 8.104003] [<c11b19c5>] ? bus_for_each_dev+0x37/0x5f
[ 8.104003] [<c11b1e55>] ? driver_attach+0x11/0x13
[ 8.104003] [<c11b2016>] ? __driver_attach+0x0/0x5b
[ 8.104003] [<c11b148d>] ? bus_add_driver+0x99/0x1c5
[ 8.104003] [<c11b2287>] ? driver_register+0x87/0xe0
[ 8.104003] [<c11461d0>] ? __pci_register_driver+0x33/0x89
[ 8.104003] [<fa1a5000>] ? alsa_card_emu10k1_init+0x0/0x14 [snd_emu10k1]
[ 8.104003] [<c100113e>] ? do_one_initcall+0x55/0x155
[ 8.104003] [<c1056fb9>] ? sys_init_module+0xa7/0x1d7
[ 8.104003] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 8.104003] Code: c6 20 00 00 00 74 0f 89 e8 b9 02 00 00 00 99 f7 f9 89 04 24 29 c5 83 e6 10 74 0c 89 e8 be 04 00 00 00 99 f7 fe 29 c5 8b 44 24 24 <8b> 4c 83 0c 8d 44 0d 00 39 44 24 04 76 29 8b 74 24 04 31 d2 eb
[ 8.104003] EIP: [<c10896e9>] zone_watermark_ok+0x5c/0x9d SS:ESP 0068:f6035d50
[ 8.104003] CR2: 000000006406f297
[ 8.107972] ---[ end trace a3347c58b8a60f2c ]---
[ 9.546361] loop: module loaded
[ 10.010189] Adding 6078456k swap on /dev/mapper/server-swap_1. Priority:-1 extents:1 across:6078456k
[ 10.523647] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 10.922573] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 12.510254] fuse init (API version 7.13)
[ 12.837724] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.747483] RPC: Registered udp transport module.
[ 13.747528] RPC: Registered tcp transport module.
[ 13.747568] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.196182] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.313108] svc: failed to register lockdv1 RPC service (errno 13).
[ 14.313156] lockd_up: makesock failed, error=-13
[ 14.446829] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 14.446879] tg3: eth0: Flow control is on for TX and on for RX.
[ 14.447057] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.085948] lp0: using parport0 (interrupt-driven).
[ 17.107386] ppdev: user-space parallel port driver
[ 40.296341] [drm] Initialized drm 1.1.0 20060810
 
Old 03-11-2011, 10:01 AM
Tom H
 
Default unable to install nfs-kernel-server

On Thu, Mar 10, 2011 at 7:34 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
>
> server:~# dpkg -l portmap nfs-common nfs-kernel-server
> Desired=Unknown/Install/Remove/Purge/Hold
> |
> Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
> |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
> ||/ Name * * * * * * * * * * * * *Version * * * * * * * * * * * Description
> +++-================================================== =====================
> ii *nfs-common * * * * * * * * * *1:1.2.2-4 * * * * * * * * * * NFS support files common to client and server
> iF *nfs-kernel-server * * * * * * 1:1.2.2-4 * * * * * * * * * * support for NFS kernel server
> ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapper
> server:~#

This reminds me (and the tile of the thread should've done so too!)
that nfs-kernel-server's not fully installed.

If "apt-get -f install" doesn't install and configure it fully,
"apt-get install --reinstall nfs-kernel-server" should.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTikbKs4mJKDocFTPQyFoMa8i4CmkK+sZah7boa62@mail .gmail.com">http://lists.debian.org/AANLkTikbKs4mJKDocFTPQyFoMa8i4CmkK+sZah7boa62@mail .gmail.com
 
Old 03-11-2011, 09:49 PM
Liam Cassidey
 
Default unable to install nfs-kernel-server

On Fri, Mar 11, 2011 at 11:01 AM, Tom H <tomh0665@gmail.com> wrote:


On Thu, Mar 10, 2011 at 7:34 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:

>

> server:~# dpkg -l portmap nfs-common nfs-kernel-server

> Desired=Unknown/Install/Remove/Purge/Hold

> |

> Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend

> |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

> ||/ Name * * * * * * * * * * * * *Version * * * * * * * * * * * Description

> +++-================================================== =====================

> ii *nfs-common * * * * * * * * * *1:1.2.2-4 * * * * * * * * * * NFS support files common to client and server

> iF *nfs-kernel-server * * * * * * 1:1.2.2-4 * * * * * * * * * * support for NFS kernel server

> ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapper

> server:~#



This reminds me (and the tile of the thread should've done so too!)

that nfs-kernel-server's not fully installed.



If "apt-get -f install" doesn't install and configure it fully,

"apt-get install --reinstall nfs-kernel-server" should.



This brings me back to my original problem:
server:~# apt-get -f install nfs-kernel-serverReading package lists... Done

Building dependency tree * * **Reading state information... Donenfs-kernel-server is already the newest version.0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

1 not fully installed or removed.After this operation, 0 B of additional disk space will be used.Do you want to continue [Y/n]?*Setting up nfs-kernel-server (1:1.2.2-4) ...Starting NFS common utilities: statd.

Exporting directories for NFS kernel daemon....Starting NFS kernel daemon: nfsdrpc.nfsd: Setting version failed: errno 16 (Device or resource busy)rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)

rpc.nfsd: unable to set any sockets for nfsd*failed!invoke-rc.d: initscript nfs-kernel-server, action "start" failed.dpkg: error processing nfs-kernel-server (--configure):

*subprocess installed post-installation script returned error exit status 1configured to not write apport reports** * * * * * * * * * * * * * * * * * *Errors were encountered while processing:

*nfs-kernel-serverE: Sub-process /usr/bin/dpkg returned an error code (1)server:~# apt-get install --reinstall nfs-kernel-serverReading package lists... DoneBuilding dependency tree * * **

Reading state information... Done0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.1 not fully installed or removed.After this operation, 0 B of additional disk space will be used.

Setting up nfs-kernel-server (1:1.2.2-4) ...Starting NFS common utilities: statd.Exporting directories for NFS kernel daemon....Starting NFS kernel daemon: nfsdrpc.nfsd: Setting version failed: errno 16 (Device or resource busy)

rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)rpc.nfsd: unable to set any sockets for nfsd*failed!invoke-rc.d: initscript nfs-kernel-server, action "start" failed.

dpkg: error processing nfs-kernel-server (--configure):*subprocess installed post-installation script returned error exit status 1configured to not write apport reports** * * * * * * * * * * * * * * * * * *Errors were encountered while processing:

*nfs-kernel-serverE: Sub-process /usr/bin/dpkg returned an error code (1)server:~# *
 
Old 03-12-2011, 09:54 PM
Liam Cassidey
 
Default unable to install nfs-kernel-server

On Fri, Mar 11, 2011 at 10:49 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:




On Fri, Mar 11, 2011 at 11:01 AM, Tom H <tomh0665@gmail.com> wrote:



On Thu, Mar 10, 2011 at 7:34 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:

>

> server:~# dpkg -l portmap nfs-common nfs-kernel-server

> Desired=Unknown/Install/Remove/Purge/Hold

> |

> Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend

> |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

> ||/ Name * * * * * * * * * * * * *Version * * * * * * * * * * * Description

> +++-================================================== =====================

> ii *nfs-common * * * * * * * * * *1:1.2.2-4 * * * * * * * * * * NFS support files common to client and server

> iF *nfs-kernel-server * * * * * * 1:1.2.2-4 * * * * * * * * * * support for NFS kernel server

> ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapper

> server:~#



This reminds me (and the tile of the thread should've done so too!)

that nfs-kernel-server's not fully installed.



If "apt-get -f install" doesn't install and configure it fully,

"apt-get install --reinstall nfs-kernel-server" should.



This brings me back to my original problem:
server:~# apt-get -f install nfs-kernel-serverReading package lists... Done


Building dependency tree * * **Reading state information... Donenfs-kernel-server is already the newest version.0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


1 not fully installed or removed.After this operation, 0 B of additional disk space will be used.Do you want to continue [Y/n]?*Setting up nfs-kernel-server (1:1.2.2-4) ...

Starting NFS common utilities: statd.
Exporting directories for NFS kernel daemon....Starting NFS kernel daemon: nfsdrpc.nfsd: Setting version failed: errno 16 (Device or resource busy)rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)


rpc.nfsd: unable to set any sockets for nfsd*failed!invoke-rc.d: initscript nfs-kernel-server, action "start" failed.dpkg: error processing nfs-kernel-server (--configure):


*subprocess installed post-installation script returned error exit status 1configured to not write apport reports** * * * * * * * * * * * * * * * * * *Errors were encountered while processing:


*nfs-kernel-serverE: Sub-process /usr/bin/dpkg returned an error code (1)server:~# apt-get install --reinstall nfs-kernel-serverReading package lists... Done

Building dependency tree * * **
Reading state information... Done0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.1 not fully installed or removed.After this operation, 0 B of additional disk space will be used.


Setting up nfs-kernel-server (1:1.2.2-4) ...Starting NFS common utilities: statd.Exporting directories for NFS kernel daemon....Starting NFS kernel daemon: nfsdrpc.nfsd: Setting version failed: errno 16 (Device or resource busy)


rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)rpc.nfsd: unable to set any sockets for nfsd*failed!invoke-rc.d: initscript nfs-kernel-server, action "start" failed.


dpkg: error processing nfs-kernel-server (--configure):*subprocess installed post-installation script returned error exit status 1configured to not write apport reports** * * * * * * * * * * * * * * * * * *Errors were encountered while processing:


*nfs-kernel-serverE: Sub-process /usr/bin/dpkg returned an error code (1)server:~# *



Some more debugging...
I've narrowed down the error to the rpc.nfsd binary:
server:~# rpc.nfsd -drpc.nfsd: knfsd is currently down

rpc.nfsd: Writing version string to kernel: +4.1 +2 +3 +4*rpc.nfsd: Setting version failed: errno 16 (Device or resource busy)rpc.nfsd: Creating inet TCP socket.rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)

rpc.nfsd: unable to set any sockets for nfsdserver:~#

When running with strace, I see the following suspicious lines:
open("/proc/fs/nfsd/versions", O_WRONLY|O_LARGEFILE) = 3

write(2, "rpc.nfsd: ", 10rpc.nfsd: ) * * * * * * *= 10write(2, "Writing version string to kernel"..., 48Writing version string to kernel: +4.1 +2 +3 +4 ) = 48write(2, "
", 1

) * * * * * * * * * * * = 1write(3, "+4.1 +2 +3 +4
", 15) * * * *= -1 EBUSY (Device or resource busy)write(2, "rpc.nfsd: ", 10rpc.nfsd: ) * * * * * * *= 10write(2, "Setting version failed: errno 16"..., 58Setting version failed: errno 16 (Device or resource busy)) = 58



This filesystem is definitely mounted:
server:~# mount | grep nfsnfsd on /proc/fs/nfsd type nfsd (rw)server:~#:



Here are the contents of my /etc/fstab:
# /etc/fstab: static file system information.## Use 'vol_id --uuid' to print the universally unique identifier for a

# device; this may be used with UUID= as a more robust way to name devices# that works even if disks are added and removed. See fstab(5).## <file system> * * * * * * * * * * * * * * <mount point> * <type> * * *<options> * * * <dump> *<pass>

proc * * * * * * * * * * * * * * * * * * * */proc * * * * * proc * * * *defaults * * * *0 * * * 0/dev/mapper/server-root * * * * * * * * * * / * * * * * * * xfs * * * * defaults * * * *0 * * * 1

UUID=562b0f53-e127-48f0-90ff-c2dea9ffbf8a * /boot * * * * * ext2 * * * *defaults * * * *0 * * * 2UUID=bea5cc69-50a4-42d9-8921-58683852510b * /stor * * * * * ext2 * * * *defaults * * * *0 * * * 0UUID=0f3734a8-34c6-49ec-9dd9-76221af8ac03 * /ext * * * * * *ext4 * * * *defaults * * * *0 * * * 0

/dev/mapper/server-swap_1 * * * * * * * * * none * * * * * *swap * * * *sw * * * * * * *0 * * * 0/dev/hda * * * * * * * * * * * * * * * * * */media/cdrom0 * udf,iso9660 user,noauto * * 0 * * * 0

/dev/hdb * * * * * * * * * * * * * * * * * */media/cdrom1 * udf,iso9660 user,noauto * * 0 * * * 0


Any ideas?
Thanks.
 
Old 03-14-2011, 08:14 AM
Tom H
 
Default unable to install nfs-kernel-server

On Fri, Mar 11, 2011 at 5:49 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
> On Fri, Mar 11, 2011 at 11:01 AM, Tom H <tomh0665@gmail.com> wrote:
>>
>> If "apt-get -f install" doesn't install and configure it fully,
>> "apt-get install --reinstall nfs-kernel-server" should.
>
> This brings me back to my original problem:



Been googling to understand. Are you using rpcbind or portmap?


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTi=BeaTGAct3sOfiLE38oG428-r00BwnMYKUoEOt@mail.gmail.com">http://lists.debian.org/AANLkTi=BeaTGAct3sOfiLE38oG428-r00BwnMYKUoEOt@mail.gmail.com
 
Old 03-14-2011, 08:30 AM
Tom H
 
Default unable to install nfs-kernel-server

On Sat, Mar 12, 2011 at 5:54 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
>
> Some more debugging...
>
> I've narrowed down the error to the rpc.nfsd binary:
>
> server:~# rpc.nfsd -d
> rpc.nfsd: knfsd is currently down
> rpc.nfsd: Writing version string to kernel: +4.1 +2 +3 +4
> rpc.nfsd: Setting version failed: errno 16 (Device or resource busy)
> rpc.nfsd: Creating inet TCP socket.
> rpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)
> rpc.nfsd: unable to set any sockets for nfsd
> server:~#
>
> When running with strace, I see the following suspicious lines:
> open("/proc/fs/nfsd/versions", O_WRONLY|O_LARGEFILE) = 3
> write(2, "rpc.nfsd: ", 10rpc.nfsd: ) * * * * * * *= 10
> write(2, "Writing version string to kernel"..., 48Writing version string to
> kernel: +4.1 +2 +3 +4 ) = 48
> write(2, "
", 1
> ) * * * * * * * * * * * = 1
> write(3, "+4.1 +2 +3 +4
", 15) * * * *= -1 EBUSY (Device or resource busy)
> write(2, "rpc.nfsd: ", 10rpc.nfsd: ) * * * * * * *= 10
> write(2, "Setting version failed: errno 16"..., 58Setting version failed:
> errno 16 (Device or resource busy)) = 58

I've just replied to an earlier email of yours about googling for your problem.

This looks exactly like a RHEL or Fedora bug report that I read and it
was an rpcbind-related problem.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTi=aRLyS567x09H1CTs9Nz08F6t9D_4yPtMNM3Vq@mail .gmail.com">http://lists.debian.org/AANLkTi=aRLyS567x09H1CTs9Nz08F6t9D_4yPtMNM3Vq@mail .gmail.com
 
Old 03-14-2011, 08:41 AM
Tom H
 
Default unable to install nfs-kernel-server

On Sat, Mar 12, 2011 at 5:54 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
>
> ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapper

Remembered the above when I sent my last post and thought that I might
have gone down an incorrect path.

I've just tried to install pcbind and it conflicts with portmap...


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTi=g92y6bw-6SaHZQ0ZDvVk7PkHyjcTdsL6CroJy@mail.gmail.com">http ://lists.debian.org/AANLkTi=g92y6bw-6SaHZQ0ZDvVk7PkHyjcTdsL6CroJy@mail.gmail.com
 
Old 03-15-2011, 11:11 PM
Liam Cassidey
 
Default unable to install nfs-kernel-server

On Mon, Mar 14, 2011 at 9:41 AM, Tom H <tomh0665@gmail.com> wrote:


On Sat, Mar 12, 2011 at 5:54 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:

>

> ii *portmap * * * * * * * * * * * 6.0.0-2 * * * * * * * * * * * RPC port mapper



Remembered the above when I sent my last post and thought that I might

have gone down an incorrect path.



I've just tried to install pcbind and it conflicts with portmap...





--
Yep, I'm definitely using portmap. It's installed and running fine.*
 
Old 03-23-2011, 06:24 AM
Tom H
 
Default unable to install nfs-kernel-server

On Sat, Mar 16, 2011 at 0:11 AM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
> On Mon, Mar 14, 2011 at 9:41 AM, Tom H <tomh0665@gmail.com> wrote:
>> On Sat, Mar 12, 2011 at 5:54 PM, Liam Cassidey <liam.cassidey@gmail.com> wrote:
>>>
>>> ii portmap 6.0.0-2 RPC port mapper
>>
>> Remembered the above when I sent my last post and thought that I might
>> have gone down an incorrect path.
>>
>> I've just tried to install pcbind and it conflicts with portmap...
>
> Yep, I'm definitely using portmap. It's installed and running fine.

I was looking through the archives and noticed that a reply that I thought that I'd sent isn't there.

IIRC, I'd written that googling your problem only turned up correcting it through downgrading, ensuring that daemons on which nfsd depends are started before nfsd, or re-installing.

You could try downgrading through http://snapshot.debian.org/ or upgrading if there are more recent versions of nfs-common and nfs-kernel-server in unstable or experimental.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 7D4EE010-5C7A-48A7-9F57-E0B8AACF67A1@gmail.com">http://lists.debian.org/7D4EE010-5C7A-48A7-9F57-E0B8AACF67A1@gmail.com
 

Thread Tools




All times are GMT. The time now is 11:19 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org