FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 03-07-2011, 10:23 AM
Glyn Astill
 
Default Squeeze + aacraid + Adaptec 2610SA bug?

Hi Guys,

I've recently installed squeeze amd64 on an old machine to do some tests and I'm having problems with the aacraid driver and a 2610SA controller.
It seems the contorller has issues whilst I'm formatting a partition on it, then shuts down completely. I've pasted relevent dmesg and syslog bits below.

This controller has been used in the past with no issues, that's not to say it's not a hardware error, just that I don't think so.

I was thinking of trying an alternative driver, perhaps the ones form the adaptec site. Are there any other options?

dmesg:

[ 0.688358] Adaptec aacraid driver 1.1-5[2461]-ms
[ 0.752149] aacraid 0000:04:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.768500] IRQ 21/aacraid: IRQF_DISABLED is not guaranteed on shared IRQ

syslog:

Mar 4 15:27:28 debian kernel: [ 5098.804065] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804071] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804076] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804081] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804086] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804092] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804097] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804102] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804107] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804112] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804117] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804122] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804128] aacraid: Host adapter abort request (8,0,0,0)
Mar 4 15:27:28 debian kernel: [ 5098.804203] aacraid: Host adapter reset request. SCSI hang ?
Mar 4 15:27:29 debian kernel: [ 5099.020030] AAC: Host adapter BLINK LED 0xc9
Mar 4 15:27:30 debian kernel: [ 5100.016028] AAC0: adapter kernel panic'd c9.
Mar 4 15:27:31 debian kernel: [ 5101.024042] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024045] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024047] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024049] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024051] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024052] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024055] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024056] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024058] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024060] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024062] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024064] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024066] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024068] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024070] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024072] sd 8:0:0:0: Device offlined - not ready after error recovery
Mar 4 15:27:31 debian kernel: [ 5101.024083] sd 8:0:0:0: [sdd] Unhandled error code
Mar 4 15:27:31 debian kernel: [ 5101.024085] sd 8:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
Mar 4 15:27:31 debian kernel: [ 5101.024089] sd 8:0:0:0: [sdd] CDB: Write(10): 2a 00 00 00 40 f0 00 00 88 00
Mar 4 15:27:31 debian kernel: [ 5101.024096] end_request: I/O error, dev sdd, sector 16624
Mar 4 15:27:31 debian kernel: [ 5101.024105] Buffer I/O error on device sdd1, logical block 1822
Mar 4 15:27:31 debian kernel: [ 5101.024115] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024122] Buffer I/O error on device sdd1, logical block 1823
Mar 4 15:27:31 debian kernel: [ 5101.024132] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024135] Buffer I/O error on device sdd1, logical block 1824
Mar 4 15:27:31 debian kernel: [ 5101.024144] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024147] Buffer I/O error on device sdd1, logical block 1825
Mar 4 15:27:31 debian kernel: [ 5101.024157] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024160] Buffer I/O error on device sdd1, logical block 1826
Mar 4 15:27:31 debian kernel: [ 5101.024169] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024173] Buffer I/O error on device sdd1, logical block 1827
Mar 4 15:27:31 debian kernel: [ 5101.024182] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024186] Buffer I/O error on device sdd1, logical block 1828
Mar 4 15:27:31 debian kernel: [ 5101.024195] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024198] Buffer I/O error on device sdd1, logical block 1829
Mar 4 15:27:31 debian kernel: [ 5101.024208] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024211] Buffer I/O error on device sdd1, logical block 1830
Mar 4 15:27:31 debian kernel: [ 5101.024220] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024224] Buffer I/O error on device sdd1, logical block 1831
Mar 4 15:27:31 debian kernel: [ 5101.024233] lost page write due to I/O error on sdd1
Mar 4 15:27:31 debian kernel: [ 5101.024256] sd 8:0:0:0: rejecting I/O to offline device
Mar 4 15:27:31 debian kernel: [ 5101.024288] sd 8:0:0:0: rejecting I/O to offline device
Mar 4 15:27:31 debian kernel: [ 5101.024319] sd 8:0:0:0: rejecting I/O to offline devic





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 465701.89562.qm@web26005.mail.ukl.yahoo.com">http://lists.debian.org/465701.89562.qm@web26005.mail.ukl.yahoo.com
 
Old 03-07-2011, 02:30 PM
Camaleón
 
Default Squeeze + aacraid + Adaptec 2610SA bug?

On Mon, 07 Mar 2011 11:23:39 +0000, Glyn Astill wrote:

> I've recently installed squeeze amd64 on an old machine to do some tests
> and I'm having problems with the aacraid driver and a 2610SA controller.
> It seems the contorller has issues whilst I'm formatting a partition on
> it, then shuts down completely. I've pasted relevent dmesg and syslog
> bits below.
>
> This controller has been used in the past with no issues, that's not to
> say it's not a hardware error, just that I don't think so.
>
> I was thinking of trying an alternative driver, perhaps the ones form
> the adaptec site. Are there any other options?

(...)

> syslog:

> Mar 4 15:27:28 debian kernel: [ 5098.804203] aacraid: Host adapter reset request. SCSI hang ?
> Mar 4 15:27:29 debian kernel: [ 5099.020030] AAC: Host adapter BLINK LED 0xc9
> Mar 4 15:27:30 debian kernel: [ 5100.016028] AAC0: adapter kernel panic'd c9.

Seems to go completely offline :-?

Does the card start beeping indicating a broken raid (rebuild) or the
array status is ok?

Have you checked for any BIOS update (for your motherboard and also for
the controller itself?)

Another thing you could try is to perfom the formatting from a LiveCD
(i.e., SystemRescueCD, GParted...) to discard a problem with the
kernel version used in Squeeze.

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: pan.2011.03.07.15.30.22@gmail.com">http://lists.debian.org/pan.2011.03.07.15.30.22@gmail.com
 
Old 03-07-2011, 03:03 PM
Glyn Astill
 
Default Squeeze + aacraid + Adaptec 2610SA bug?

--- On Mon, 7/3/11, Camaleón <noelamac@gmail.com> wrote:

> > I've recently installed squeeze amd64 on an old
> machine to do some tests
> > and I'm having problems with the aacraid driver and a
> 2610SA controller.
> > It seems the contorller has issues whilst I'm
> formatting a partition on
> > it, then shuts down completely. I've pasted relevent
> dmesg and syslog
> > bits below.
> >
> > This controller has been used in the past with no
> issues, that's not to
> > say it's not a hardware error, just that I don't think
> so.
> >
> > I was thinking of trying an alternative driver,
> perhaps the ones form
> > the adaptec site. Are there any other options?
>
> (...)
>
> > syslog:
>
> > Mar* 4 15:27:28 debian kernel: [ 5098.804203]
> aacraid: Host adapter reset request. SCSI hang ?
> > Mar* 4 15:27:29 debian kernel: [ 5099.020030]
> AAC: Host adapter BLINK LED 0xc9
> > Mar* 4 15:27:30 debian kernel: [ 5100.016028]
> AAC0: adapter kernel panic'd c9.
>
> Seems to go completely offline :-?
>

Yeah entirely offline.

> Does the card start beeping indicating a broken raid
> (rebuild) or the
> array status is ok?
>

Nothing reported by the card, all the VDs are in the optimal state.

> Have you checked for any BIOS update (for your motherboard
> and also for
> the controller itself?)
>

The controller is on the latest bios, and the motherboard is on the latest I can find.

> Another thing you could try is to perfom the formatting
> from a LiveCD
> (i.e., SystemRescueCD, GParted...) to discard a problem
> with the
> kernel version used in Squeeze.
>

Ah I may have a bash at that then just to see if I can format it.

I've another controller in the machine, an LSI SAS controller that's working fine. I'll double check the firmware and have a test with a live cd too.

I definately had this machine up and running with lenny not too long ago, so I'm still leaning towards a driver issue.





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 841431.44877.qm@web26003.mail.ukl.yahoo.com">http://lists.debian.org/841431.44877.qm@web26003.mail.ukl.yahoo.com
 
Old 07-17-2011, 10:53 PM
Thomas Burger
 
Default Squeeze + aacraid + Adaptec 2610SA bug?

Hello there,

i can confirm the issue. No solution yet. Have seen it with the adaptec
2610 and the equivalent raid-card dell cerc. Seems those cards are
finally out of driver support


Regards
Thomas


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 4E236807.6050701@eritron.de">http://lists.debian.org/4E236807.6050701@eritron.de
 

Thread Tools




All times are GMT. The time now is 01:29 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org