FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 12-30-2010, 12:03 PM
Kousik Maiti
 
Default Broadband Configuration

Hi list,
I try to configure USB broadband on Debian Lenny.

I have installed ppp,setserial,wvdial for that.dmesg message after inserting* USB modem is


[ 9430.162554] usb 4-2: new full speed USB device using uhci_hcd and address 2


[ 9430.322890] usb 4-2: configuration #1 chosen from 1 choice
[ 9430.326985] usb 4-2: New USB device found, idVendor=19d2, idProduct=fff5
[ 9430.326985] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3


[ 9430.326985] usb 4-2: Product: USB Storage
[ 9430.326985] usb 4-2: Manufacturer: ZTE, Incorporated
[ 9430.326985] usb 4-2: SerialNumber: 000000000002
[ 9430.443496] Initializing USB Mass Storage driver...
[ 9430.443496] scsi3 : SCSI emulation for USB Mass Storage devices


[ 9430.443496] usbcore: registered new interface driver usb-storage
[ 9430.443496] USB Mass Storage support registered.
[ 9430.467616] usb-storage: device found at 2
[ 9430.467623] usb-storage: waiting for device to settle before scanning


[ 9435.489410] usb-storage: device scan complete
[ 9435.491888] scsi 3:0:0:0: CD-ROM*********** ZTE***** USB Storage FFF1 2.31 PQ: 0 ANSI: 2
[ 9435.494246] scsi 3:0:0:1: Direct-Access**** ZTE***** USB Storage FFF1 2.31 PQ: 0 ANSI: 2


[ 9435.518029] sr1: scsi-1 drive
[ 9435.518029] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 9435.518029] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 9435.521322] sd 3:0:0:1: [sdb] Attached SCSI removable disk
[ 9435.521322] sd 3:0:0:1: Attached scsi generic sg3 type 0


[ 9437.181364] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9437.205848] ISOFS: changing to secondary root
*

And when I run #wvdialconf its complaining like this

Editing `/etc/wvdial.conf'.



Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0** S1** S2** S3**


Sorry, no modem was detected!* Is it in use by another program?
Did you configure it properly with setserial?



Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.



Can anybody help?
Thanks in advance.



--
Wishing you the very best of everything, always!!!
Kousik Maiti(কৌশিক মাইতি)
Registered Linux User #474025
Registered Ubuntu User # 28654
 
Old 12-30-2010, 12:21 PM
Daniel Bareiro
 
Default Broadband Configuration

On Thursday, 30 December 2010 18:33:32 +0530,
Kousik Maiti wrote:

> Hi list,

Hi, Kousik.

> I try to configure USB broadband on Debian Lenny.
>
> I have installed ppp,setserial,wvdial for that.dmesg message after
> inserting USB modem is
>
>
> [ 9430.162554] usb 4-2: new full speed USB device using uhci_hcd and address
> 2
> [ 9430.322890] usb 4-2: configuration #1 chosen from 1 choice
> [ 9430.326985] usb 4-2: New USB device found, idVendor=19d2, idProduct=fff5
> [ 9430.326985] usb 4-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 9430.326985] usb 4-2: Product: USB Storage
> [ 9430.326985] usb 4-2: Manufacturer: ZTE, Incorporated
> [ 9430.326985] usb 4-2: SerialNumber: 000000000002
> [ 9430.443496] Initializing USB Mass Storage driver...
> [ 9430.443496] scsi3 : SCSI emulation for USB Mass Storage devices
> [ 9430.443496] usbcore: registered new interface driver usb-storage
> [ 9430.443496] USB Mass Storage support registered.
> [ 9430.467616] usb-storage: device found at 2
> [ 9430.467623] usb-storage: waiting for device to settle before scanning
> [ 9435.489410] usb-storage: device scan complete
> [ 9435.491888] scsi 3:0:0:0: CD-ROM ZTE USB Storage FFF1
> 2.31 PQ: 0 ANSI: 2
> [ 9435.494246] scsi 3:0:0:1: Direct-Access ZTE USB Storage FFF1
> 2.31 PQ: 0 ANSI: 2
> [ 9435.518029] sr1: scsi-1 drive
> [ 9435.518029] sr 3:0:0:0: Attached scsi CD-ROM sr1
> [ 9435.518029] sr 3:0:0:0: Attached scsi generic sg2 type 5
> [ 9435.521322] sd 3:0:0:1: [sdb] Attached SCSI removable disk
> [ 9435.521322] sd 3:0:0:1: Attached scsi generic sg3 type 0
> [ 9437.181364] ISO 9660 Extensions: Microsoft Joliet Level 3
> [ 9437.205848] ISOFS: changing to secondary root

Perhaps the modem uses the zero-cd technology ([1], [2]). Have you tried
using usb_modeswitch? Unfortunately there is not a package in Debian
Lenny, so you'd have to compile it.

Regards,
Daniel

[1] http://standy.blog.ugm.ac.id/2010/01/13/usb_modeswitch-activating-switchable-usb-devices-on-linux/
[2] http://www.otubo.net/2009/12/vivo-3g-using-huawei-e1756-on-ubuntu.html
--
Fingerprint: BFB3 08D6 B4D1 31B2 72B9 29CE 6696 BF1B 14E6 1D37
Powered by Debian GNU/Linux Lenny - Linux user #188.598
 

Thread Tools




All times are GMT. The time now is 03:02 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org