FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 11-05-2010, 12:27 AM
Kjetil brinchmann Halvorsen
 
Default Problems configuring wireless with wicd on amd64 lenny

I have just installed lenny from cd-1 (5.0.6), but I cannot get wireless network
to work. I have installed wicd from lenny-backports, and followed the
instructions on
the page
http://wiki.debian.org/WiFi/HowToUse
but wicd does not recognize the wireless network (which is there,
I am sending this via it, from a live cd of ubuntu).


Any ideas?

If is is relevant, I am using a laptop
HP Pavillion dv69211a Notebook,
with TL-60 AMD Turion 64.

Kjetil

--
"If you want a picture of the future - imagine a boot stamping on the
human face - forever."

George Orwell (1984)


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTik+8sgQ8Bm5nDx3NMT4-Uc+Y2DYcF0He5NCXg+=@mail.gmail.com">http://lists.debian.org/AANLkTik+8sgQ8Bm5nDx3NMT4-Uc+Y2DYcF0He5NCXg+=@mail.gmail.com
 
Old 11-05-2010, 10:07 AM
Andrei Popescu
 
Default Problems configuring wireless with wicd on amd64 lenny

On Jo, 04 nov 10, 22:27:45, Kjetil brinchmann Halvorsen wrote:
> I have just installed lenny from cd-1 (5.0.6), but I cannot get wireless network
> to work. I have installed wicd from lenny-backports, and followed the
> instructions on
> the page
> http://wiki.debian.org/WiFi/HowToUse
> but wicd does not recognize the wireless network (which is there,
> I am sending this via it, from a live cd of ubuntu).

My cristal ball says you are missing some firmware package specific to
your wireless card or you need a newer kernel. Please post the output of
'lspci -nn' and 'dmesg | grep -i firmware' on the Lenny system.

Regards,
Andrei
--
Offtopic discussions among Debian users and developers:
http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic
 
Old 11-05-2010, 01:49 PM
 
Default Problems configuring wireless with wicd on amd64 lenny

From: Kjetil brinchmann Halvorsen <kjetil1001@gmail.co.>
Date: Thu, 04 Nov 2010 22:27:45 -0300
> ... wicd does not recognize the wireless network

Do you have a twisted pair adapter for the machine? PCMCIA or USB.
Might help to get a wired connection working first.

Regards, ... Peter E.

--
Telephone 1 360 450 2132. 7785886232 is gone.
Shop pages http://carnot.yi.org/ accessible as long as the old
drives survive; installation of NetBSD on new drives pending.
Personal pages, http://members.shaw.ca/peasthope/ .


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 171056677.31829.30318@cantor.invalid">http://lists.debian.org/171056677.31829.30318@cantor.invalid
 
Old 11-05-2010, 02:12 PM
Kjetil brinchmann Halvorsen
 
Default Problems configuring wireless with wicd on amd64 lenny

see below.

On Fri, Nov 5, 2010 at 11:07, Andrei Popescu <andreimpopescu@gmail.com> wrote:
> On Jo, 04 nov 10, 22:27:45, Kjetil brinchmann Halvorsen wrote:
>> I have just installed lenny from cd-1 (5.0.6), but I cannot get wireless network
>> to work. I have installed wicd from lenny-backports, and followed the
>> instructions on
>> the page
>> http://wiki.debian.org/WiFi/HowToUse
>> but wicd does not recognize the wireless network (which is there,
>> I am sending this via it, from a live cd of ubuntu).
>
> My cristal ball says you are missing some firmware package specific to
> your wireless card or you need a newer kernel. Please post the output of
> 'lspci -nn' and 'dmesg | grep -i firmware' on the Lenny system.
>
output of lspci -nn :
00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller
[10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge
[10de:0548] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP67 SMBus [10de:0542] (rev a2)
00:01.2 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller
[10de:0541] (rev a2)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP67 Co-processor
[10de:0543] (rev a2)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1
Controller [10de:055e] (rev a2)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0
Controller [10de:055f] (rev a2)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1
Controller [10de:055e] (rev a2)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0
Controller [10de:055f] (rev a2)
00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller
[10de:0560] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition
Audio [10de:055c] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Bridge
[10de:0561] (rev a2)
00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller
[10de:0550] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet
[10de:054c] (rev a2)
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:12.0 VGA compatible controller [0300]: nVidia Corporation GeForce
7150M [10de:0531] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
02:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
Controller [1180:0832] (rev 05)
02:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
02:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host
Controller [1180:0843] (rev 12)
02:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
Host Adapter [1180:0592] (rev 12)
02:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card
Controller [1180:0852] (rev ff)
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)


output od dmesg grep -i `firmware`
is nothing --- blank.

I give the total (large) output of dmesg at the ver end of this message.

Kjetil

> Regards,
> Andrei
> --
> Offtopic discussions among Debian users and developers:
> http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.10 (GNU/Linux)
>
> iQEcBAEBCAAGBQJM0+V+AAoJEHNWs3jeoi3phWIIALgfrrwshn PUPcVUMWIrlhrb
> tTO2pZzGeTgWByMYQ3TfbMI7mF9mJwAaK0IQv5vrjz0rjQ8lJn eQKoPWk+g302aQ
> SnXV+ZP/46aSEl6ZjjrqRAmUfWUeniPbFYanUxUg31tMh1qfODtqkS1Dae i8ZPmm
> DhOvEogWh4tiH/kgSxnasqaR0T47GH0qHRdCq0pIuxTutV2MrXcvGlcHTAYQta+X
> asqp9LIc0LbMlg2evCC6tCUZ707WsxzQa0zy1nbiqvUOuA/W80zMeHkpyU6/Km/3
> LlhSZFGHU1lT3znySgvbtYcYvfuRvMAV+HPXiEb3xJD+Bbq230 xl817DPS2enTA=
> =1kjw
> -----END PGP SIGNATURE-----
>
>



--
"If you want a picture of the future - imagine a boot stamping on the
human face - forever."

George Orwell (1984)



[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-25lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Thu Sep 16 15:56:38 UTC 2010
[ 0.000000] Command line:
root=UUID=7c58dea8-7e9f-4885-bc54-317fec47f06b ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable)
[ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 507728) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7BF5C0CE, 006C (r1 HPQOEM SLIC-MPC 6040000
LTP 0)
[ 0.000000] ACPI: FACP 7BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000
PTL_ F4240)
[ 0.000000] ACPI: DSDT 7BF5C13A, 880C (r1 NVIDIA MCP67 6040000
MSFT 3000000)
[ 0.000000] ACPI: FACS 7BF65FC0, 0040
[ 0.000000] ACPI: TCPA 7BF64AAE, 0032 (r1 Phoeni x 6040000
TL 0)
[ 0.000000] ACPI: SRAT 7BF64AE0, 00A0 (r1 AMD HAMMER 6040000
AMD 1)
[ 0.000000] ACPI: SSDT 7BF64B80, 0206 (r1 PTLTD POWERNOW 6040000
LTP 1)
[ 0.000000] ACPI: MCFG 7BF64D86, 003C (r1 PTLTD MCFG 6040000
LTP 0)
[ 0.000000] ACPI: HPET 7BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000
LTP 1)
[ 0.000000] ACPI: APIC 7BF64DFA, 0068 (r1 PTLTD APIC 6040000
LTP 0)
[ 0.000000] ACPI: BOOT 7BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: SLIC 7BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000
LTP 1)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] Entering add_active_range(0, 256, 507728) 1 entries of 3200 used
[ 0.000000] NUMA: Allocated memnodemap from c000 - d080
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007bf50000
[ 0.000000] NODE_DATA [000000000000d080 - 000000000001207f]
[ 0.000000] bootmap [0000000000013000 - 00000000000227ef] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
[ 0.000000] early res: 3 [37daa000-37fef478] RAMDISK
[ 0.000000] early res: 4 [9e000-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] early res: 6 [c000-d07f] MEMNODEMAP
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD ->
[ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 158
[ 0.000000] 0: 256 -> 507728
[ 0.000000] On node 0 totalpages: 507630
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1249 pages reserved
[ 0.000000] DMA zone: 2693 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6886 pages used for memmap
[ 0.000000] DMA32 zone: 496746 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 499439
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
root=UUID=7c58dea8-7e9f-4885-bc54-317fec47f06b ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2000.187 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ c20000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 1994668k/2030912k available (2228k kernel code,
35852k reserved, 1084k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083851] Calibrating delay using timer specific routine..
4004.74 BogoMIPS (lpj=8009499)
[ 0.083906] Security Framework initialized
[ 0.083912] SELinux: Disabled at boot.
[ 0.083915] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084005] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] ACPI: Core revision 20080321
[ 0.140516] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.140520] Using local APIC timer interrupts.
[ 0.148009] APIC timer calibration result 12501177
[ 0.148009] Detected 12.501 MHz APIC timer.
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine..
4000.43 BogoMIPS (lpj=8000868)
[ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.156009] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.156009] CPU 1/1 -> Node 0
[ 0.156009] CPU: Physical Processor ID: 0
[ 0.156009] CPU: Processor Core ID: 1
[ 0.156009] AMD C1E detected late. Force timer broadcast.
[ 0.235827] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.235849] Brought up 2 CPUs
[ 0.235852] Total of 2 processors activated (8005.18 BogoMIPS).
[ 0.236010] CPU0 attaching sched-domain:
[ 0.236013] domain 0: span 0-1
[ 0.236014] groups: 0 1
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] CPU1 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 1 0
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] net_namespace: 1224 bytes
[ 0.236014] Booting paravirtualized kernel on bare hardware
[ 0.236014] NET: Registered protocol family 16
[ 0.236014] node 0 link 0: io port [1000, fffff]
[ 0.236014] TOM: 0000000080000000 aka 2048M
[ 0.236014] node 0 link 0: mmio [a0000, bffff]
[ 0.236014] node 0 link 0: mmio [80000000, dfffffff]
[ 0.236014] node 0 link 0: mmio [e0000000, efffffff]
[ 0.236014] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.236014] bus: [00,ff] on node 0 link 0
[ 0.236014] bus: 00 index 0 io port: [0, ffff]
[ 0.236014] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.236014] bus: 00 index 2 mmio: [80000000, fcffffffff]
[ 0.236014] ACPI: bus type pci registered
[ 0.236014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.236014] PCI: MCFG area at e0000000 reserved in E820
[ 0.236014] PCI: Using MMCONFIG at e0000000 - e04fffff
[ 0.236014] PCI: Using configuration type 1 for base access
[ 0.236014] ACPI: EC: Look up EC in DSDT
[ 0.239145] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.239911] ACPI: Interpreter enabled
[ 0.239914] ACPI: (supports S0 S3 S4 S5)
[ 0.239930] ACPI: Using IOAPIC for interrupt routing
[ 0.239911] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.263912] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.263912] ACPI: EC: driver started in interrupt mode
[ 0.263912] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.263913] PCI: Transparent bridge - 0000:00:08.0
[ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.299915] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
[ 0.299915] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.299915] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.299915] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.299915] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 0.299915] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.299915] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.299915] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[ 0.299915] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[ 0.299915] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 0.299915] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[ 0.303915] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
[ 0.303915] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
[ 0.303915] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[ 0.303915] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.303915] pnp: PnP ACPI init
[ 0.303915] ACPI: bus type pnp registered
[ 0.303915] pnp 00:00: parse allocated resources
[ 0.303915] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.303915] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 0.303915] pnp 00:01: parse allocated resources
[ 0.303915] pnp 00:01: add irq 8 flags 0x1
[ 0.303915] pnp 00:01: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.303915] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.303915] pnp 00:02: parse allocated resources
[ 0.303915] pnp 00:02: add mem 0xe0000000-0xefffffff flags 0x1
[ 0.303915] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.303915] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303915] pnp 00:03: parse allocated resources
[ 0.303915] pnp 00:03: add io 0x1000-0x107f flags 0x1
[ 0.303915] pnp 00:03: add io 0x1080-0x10ff flags 0x1
[ 0.303915] pnp 00:03: add io 0x1400-0x147f flags 0x1
[ 0.303915] pnp 00:03: add io 0x1480-0x14ff flags 0x1
[ 0.303915] pnp 00:03: add io 0x1800-0x187f flags 0x1
[ 0.303915] pnp 00:03: add io 0x1880-0x18ff flags 0x1
[ 0.303915] pnp 00:03: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.303915] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303915] pnp 00:04: parse allocated resources
[ 0.303915] pnp 00:04: add io 0x10-0x1f flags 0x1
[ 0.303915] pnp 00:04: add io 0x22-0x3f flags 0x1
[ 0.303915] pnp 00:04: add io 0x44-0x5f flags 0x1
[ 0.303915] pnp 00:04: add io 0x63-0x63 flags 0x1
[ 0.303915] pnp 00:04: add io 0x65-0x65 flags 0x1
[ 0.303915] pnp 00:04: add io 0x67-0x6f flags 0x1
[ 0.303915] pnp 00:04: add io 0x72-0x73 flags 0x1
[ 0.303915] pnp 00:04: add io 0x74-0x7f flags 0x1
[ 0.303915] pnp 00:04: add io 0x80-0x80 flags 0x1
[ 0.303915] pnp 00:04: add io 0x84-0x84 flags 0x1
[ 0.303915] pnp 00:04: add io 0x91-0x93 flags 0x1
[ 0.303915] pnp 00:04: add io 0x97-0x9f flags 0x1
[ 0.303915] pnp 00:04: add io 0xa2-0xbf flags 0x1
[ 0.303915] pnp 00:04: add io 0xe0-0xef flags 0x1
[ 0.303915] pnp 00:04: add io 0x360-0x361 flags 0x1
[ 0.303915] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
[ 0.303915] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.303915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303915] pnp 00:05: parse allocated resources
[ 0.303915] pnp 00:05: add io 0x0-0x8 flags 0x1
[ 0.303915] pnp 00:05: add io 0xa-0xf flags 0x1
[ 0.303915] pnp 00:05: add io 0x81-0x83 flags 0x1
[ 0.303915] pnp 00:05: add io 0x87-0x87 flags 0x1
[ 0.303915] pnp 00:05: add io 0x89-0x8b flags 0x1
[ 0.303915] pnp 00:05: add io 0x8f-0x8f flags 0x1
[ 0.303915] pnp 00:05: add io 0xc0-0xd1 flags 0x1
[ 0.303915] pnp 00:05: add io 0xd4-0xdf flags 0x1
[ 0.303915] pnp 00:05: add dma 4 flags 0x4
[ 0.303915] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.303915] pnp 00:06: parse allocated resources
[ 0.303915] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.303915] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.303915] pnp 00:07: parse allocated resources
[ 0.303915] pnp 00:07: add io 0x70-0x71 flags 0x1
[ 0.303915] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303915] pnp 00:08: parse allocated resources
[ 0.303915] pnp 00:08: add io 0xf0-0xf1 flags 0x1
[ 0.303915] pnp 00:08: add irq 13 flags 0x1
[ 0.303915] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.303915] pnp 00:09: parse allocated resources
[ 0.303915] pnp 00:09: add io 0x60-0x60 flags 0x1
[ 0.303915] pnp 00:09: add io 0x64-0x64 flags 0x1
[ 0.303915] pnp 00:09: add irq 1 flags 0x1
[ 0.303915] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303915] pnp 00:0a: parse allocated resources
[ 0.303915] pnp 00:0a: add irq 12 flags 0x1
[ 0.303915] pnp 00:0a: Plug and Play ACPI device, IDs SYN013b
SYN0100 SYN0002 PNP0f13 (active)
[ 0.307915] pnp 00:0b: parse allocated resources
[ 0.307915] pnp 00:0b: add mem 0xffc00000-0xffffffff flags 0x0
[ 0.307915] pnp 00:0b: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.307915] pnp 00:0b: add mem 0xfee00000-0xfeefffff flags 0x1
[ 0.307915] pnp 00:0b: add mem 0xfed00000-0xfed00fff flags 0x1
[ 0.307915] pnp 00:0b: add mem 0x0-0xffffffffffffffff flags 0x10000001
[ 0.307915] pnp 00:0b: add mem 0xfef00000-0xfef00fff flags 0x1
[ 0.307915] pnp 00:0b: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.307915] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.307915] pnp: PnP ACPI: found 12 devices
[ 0.307915] ACPI: ACPI bus type pnp unregistered
[ 0.307915] usbcore: registered new interface driver usbfs
[ 0.307915] usbcore: registered new interface driver hub
[ 0.307915] usbcore: registered new device driver usb
[ 0.307915] PCI: Using ACPI for IRQ routing
[ 0.323916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.323916] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.323916] ACPI: RTC can wake from S4
[ 0.327945] Clockevents: could not switch to one-shot mode: lapic
is not functional.
[ 0.327949] Could not switch to high resolution mode on CPU 0
[ 0.335941] Clockevents: could not switch to one-shot mode: lapic
is not functional.
[ 0.335941] Could not switch to high resolution mode on CPU 1
[ 0.343932] pnp: the driver 'system' has been registered
[ 0.343932] system 00:02: iomem range 0xe0000000-0xefffffff could
not be reserved
[ 0.343932] system 00:02: driver attached
[ 0.343932] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 0.343932] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.343932] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.343932] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 0.343932] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.343932] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.343932] system 00:03: driver attached
[ 0.343932] system 00:04: ioport range 0x360-0x361 has been reserved
[ 0.343932] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.343932] system 00:04: driver attached
[ 0.343932] system 00:0b: iomem range 0xffc00000-0xffffffff could
not be reserved
[ 0.343932] system 00:0b: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.343932] system 00:0b: iomem range 0xfee00000-0xfeefffff could
not be reserved
[ 0.343932] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.343932] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.343932] system 00:0b: driver attached
[ 0.343932] PCI: Bridge: 0000:00:08.0
[ 0.343932] IO window: disabled.
[ 0.343932] MEM window: 0xf6100000-0xf61fffff
[ 0.343932] PREFETCH window: disabled.
[ 0.343932] PCI: Bridge: 0000:00:0c.0
[ 0.343932] IO window: 4000-4fff
[ 0.343932] MEM window: 0xf2000000-0xf3ffffff
[ 0.343932] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[ 0.343932] PCI: Bridge: 0000:00:0d.0
[ 0.343932] IO window: disabled.
[ 0.343932] MEM window: 0xf6000000-0xf60fffff
[ 0.343932] PREFETCH window: disabled.
[ 0.343932] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 0.343932] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.343932] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.343932] NET: Registered protocol family 2
[ 0.387934] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.387934] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.387934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.387934] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.387934] TCP reno registered
[ 0.403940] NET: Registered protocol family 1
[ 0.403940] checking if image is initramfs... it is
[ 0.511929] Clockevents: could not switch to one-shot
mode:<6>Clockevents: could not switch to one-shot mode: lapic is not
functional.
[ 0.511935] Could not switch to high resolution mode on CPU 0
[ 0.511929] lapic is not functional.
[ 0.511929] Could not switch to high resolution mode on CPU 1
[ 0.551928] Freeing initrd memory: 2325k freed
[ 0.551928] Simple Boot Flag at 0x36 set to 0x1
[ 0.552843] audit: initializing netlink socket (disabled)
[ 0.552843] type=2000 audit(1288965240.544:1): initialized
[ 0.552843] Total HugeTLB memory allocated, 0
[ 0.552899] VFS: Disk quotas dquot_6.5.1
[ 0.552936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.552986] msgmni has been set to 3900
[ 0.553138] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.553141] io scheduler noop registered
[ 0.553143] io scheduler anticipatory registered
[ 0.553145] io scheduler deadline registered
[ 0.553163] io scheduler cfq registered (default)
[ 0.553192] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.553359] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.553374] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.553389] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.553405] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.553420] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 0.553435] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.553449] pci 0000:00:12.0: Boot video device
[ 0.553608] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.553629] assign_interrupt_mode Found MSI capability
[ 0.553651] Allocate Port Service[0000:00:0c.0cie00]
[ 0.553735] Allocate Port Service[0000:00:0c.0cie03]
[ 0.553826] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.553845] assign_interrupt_mode Found MSI capability
[ 0.553862] Allocate Port Service[0000:00:0d.0cie00]
[ 0.553942] Allocate Port Service[0000:00:0d.0cie03]
[ 0.557846] hpet_resources: 0xfed00000 is busy
[ 0.557932] Linux agpgart interface v0.103
[ 0.557935] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 0.558335] pnp: the driver 'serial' has been registered
[ 0.560571] brd: module loaded
[ 0.560668] input: Macintosh mouse button emulation as /class/input/input0
[ 0.560803] pnp: the driver 'i8042 kbd' has been registered
[ 0.560815] i8042 kbd 00:09: driver attached
[ 0.560849] pnp: the driver 'i8042 aux' has been registered
[ 0.560849] i8042 aux 00:0a: driver attached
[ 0.560849] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
[ 0.589003] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.589003] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.605871] mice: PS/2 mouse device common for all mice
[ 0.605944] pnp: the driver 'rtc_cmos' has been registered
[ 0.606022] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.606046] rtc0: alarms up to one year, y3k
[ 0.606048] rtc_cmos 00:07: driver attached
[ 0.606108] cpuidle: using governor ladder
[ 0.606110] cpuidle: using governor menu
[ 0.606115] No iBFT detected.
[ 0.606530] TCP cubic registered
[ 0.606533] NET: Registered protocol family 17
[ 0.606743] registered taskstats version 1
[ 0.606942] rtc_cmos 00:07: setting system clock to 2010-11-05
13:54:01 UTC (1288965241)
[ 0.606951] Freeing unused kernel memory: 392k freed
[ 0.623798] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.645509] Uniform Multi-Platform E-IDE driver
[ 0.645515] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 0.647206] No dock devices found.
[ 0.654671] SCSI subsystem initialized
[ 0.661805] libata version 3.00 loaded.
[ 0.664623] ahci 0000:00:09.0: version 3.0
[ 0.664992] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 0.664992] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] ->
GSI 23 (level, low) -> IRQ 23
[ 1.669022] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0xf impl IDE mode
[ 1.669026] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 1.669030] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 1.669394] scsi0 : ahci
[ 1.669581] scsi1 : ahci
[ 1.669692] scsi2 : ahci
[ 1.669803] scsi3 : ahci
[ 1.669926] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port
0xf6484100 irq 1277
[ 1.669929] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port
0xf6484180 irq 1277
[ 1.669932] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port
0xf6484200 irq 1277
[ 1.669935] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port
0xf6484280 irq 1277
[ 2.172998] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.172998] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100
[ 2.172998] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.172998] ata1.00: configured for UDMA/100
[ 2.504990] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.836982] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.168986] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.168986] scsi 0:0:0:0: Direct-Access ATA FUJITSU
MHZ2160B 8909 PQ: 0 ANSI: 5
[ 3.193761] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.193860] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.193865] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.193865] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.193865] ACPI: ACPI0007:01 is registered as cooling_device1
[ 3.193865] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.193865] ACPI Exception (thermal-0377): AE_OK, No or invalid
critical threshold [20080321]
[ 3.285701] Driver 'sd' needs updating - please use bus_type methods
[ 3.285813] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.285829] sd 0:0:0:0: [sda] Write Protect is off
[ 3.285832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.285854] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.285909] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.285921] sd 0:0:0:0: [sda] Write Protect is off
[ 3.285923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.285944] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.285947] sda: sda1 sda2 sda3 sda4
[ 3.314482] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.756678] PM: Starting manual resume from disk
[ 3.804676] kjournald starting. Commit interval 5 seconds
[ 3.804676] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.102933] udevd version 125 started
[ 5.568656] input: Power Button (FF) as /class/input/input2
[ 5.628656] ACPI: Power Button (FF) [PWRF]
[ 5.628656] input: Sleep Button (CM) as /class/input/input3
[ 5.692655] ACPI: Sleep Button (CM) [SLPB]
[ 5.692655] input: Lid Switch as /class/input/input4
[ 5.724655] ACPI: Lid Switch [LID]
[ 5.748654] ACPI: AC Adapter [ACAD] (on-line)
[ 5.748654] input: Power Button (CM) as /class/input/input5
[ 5.788654] ACPI: Power Button (CM) [PWRB]
[ 6.061009] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 6.061415] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 6.061425] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] ->
GSI 18 (level, low) -> IRQ 18
[ 6.061440] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 6.061443] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.061615] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 1
[ 6.061636] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
[ 6.118933] usb usb1: configuration #1 chosen from 1 choice
[ 6.118971] hub 1-0:1.0: USB hub found
[ 6.118983] hub 1-0:1.0: 7 ports detected
[ 6.220998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.221002] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.221005] usb usb1: Product: OHCI Host Controller
[ 6.221007] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 6.221009] usb usb1: SerialNumber: 0000:00:02.0
[ 6.221456] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
[ 6.221459] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] ->
GSI 18 (level, low) -> IRQ 18
[ 6.221473] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 6.221477] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 6.221531] ohci_hcd 0000:00:04.0: new USB bus registered, assigned
bus number 2
[ 6.221547] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
[ 6.232654] ACPI: Battery Slot [BAT0] (battery present)
[ 6.232654] ACPI: WMI: Mapper loaded
[ 6.278943] usb usb2: configuration #1 chosen from 1 choice
[ 6.278978] hub 2-0:1.0: USB hub found
[ 6.278988] hub 2-0:1.0: 2 ports detected
[ 6.380969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.380973] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.380976] usb usb2: Product: OHCI Host Controller
[ 6.380978] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 6.380980] usb usb2: SerialNumber: 0000:00:04.0
[ 6.384648] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 6.384648] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUS2] ->
GSI 22 (level, low) -> IRQ 22
[ 6.384648] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 6.384648] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.384648] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 3
[ 6.384648] ehci_hcd 0000:00:02.1: debug port 1
[ 6.384648] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 6.384648] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[ 6.458732] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 6.458735] ricoh-mmc: Copyright(c) Philip Langdale
[ 6.496652] ACPI: device:25 is registered as cooling_device2
[ 6.496652] input: Video Bus as /class/input/input6
[ 6.524881] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 6.544646] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 6.544646] usb usb3: configuration #1 chosen from 1 choice
[ 6.544646] hub 3-0:1.0: USB hub found
[ 6.544646] hub 3-0:1.0: 7 ports detected
[ 6.548653] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 6.604646] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 6.652645] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.652645] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.652645] usb usb3: Product: EHCI Host Controller
[ 6.652645] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 6.652645] usb usb3: SerialNumber: 0000:00:02.1
[ 6.652645] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[ 6.652645] ACPI: PCI Interrupt 0000:00:04.1[b] -> Link [Z019] ->
GSI 22 (level, low) -> IRQ 22
[ 6.652645] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 6.652645] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 6.652645] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 4
[ 6.652645] ehci_hcd 0000:00:04.1: debug port 1
[ 6.652645] PCI: cache line size of 64 is not supported by device
0000:00:04.1
[ 6.652645] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
[ 6.652645] input: PC Speaker as /class/input/input7
[ 6.667400] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 6.667503] usb usb4: configuration #1 chosen from 1 choice
[ 6.667540] hub 4-0:1.0: USB hub found
[ 6.667550] hub 4-0:1.0: 2 ports detected
[ 6.773234] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.773234] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.773234] usb usb4: Product: EHCI Host Controller
[ 6.773234] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 6.773234] usb usb4: SerialNumber: 0000:00:04.1
[ 6.773234] NFORCE-MCP67: 0000:00:06.0 (rev a1) UDMA133 controller
[ 6.773234] NFORCE-MCP67: IDE controller (0x10de:0x0560 rev 0xa1)
at PCI slot 0000:00:06.0
[ 6.773234] NFORCE-MCP67: not 100% native mode: will probe irqs later
[ 6.773234] NFORCE-MCP67: BIOS didn't set cable bits correctly.
Enabling workaround.
[ 6.773234] NFORCE-MCP67: IDE port disabled
[ 6.773234] ide0: BM-DMA at 0x30c0-0x30c7
[ 6.773234] Probing IDE interface ide0...
[ 6.816649] sdhci: Secure Digital Host Controller Interface driver
[ 6.816649] sdhci: Copyright(c) Pierre Ossman
[ 7.433984] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 7.524637] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1,
caps: 0xa04711/0xa00000
[ 7.552637] hda: TSSTcorp CDDVDW TS-L632N, ATAPI CD/DVD-ROM drive
[ 7.584637] usb 3-2: configuration #1 chosen from 1 choice
[ 7.584637] usb 3-2: New USB device found, idVendor=04fc, idProduct=0c15
[ 7.584637] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 7.584637] usb 3-2: Product: USB to Serial-ATA bridge
[ 7.584637] usb 3-2: Manufacturer: Sunplus Technology Co.,Ltd.
[ 7.584637] usb 3-2: SerialNumber: CFD0CAF080000
[ 7.600636] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 8.264630] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 8.264630] hda: MWDMA2 mode selected
[ 8.264630] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 8.280629] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
[ 8.280629] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 8.280629] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] ->
GSI 20 (level, low) -> IRQ 20
[ 8.280629] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 8.312629] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 8.472628] usb 4-2: configuration #1 chosen from 1 choice
[ 8.476628] usb 4-2: New USB device found, idVendor=0408, idProduct=030c
[ 8.476628] usb 4-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 8.476628] usb 4-2: Product: HP Webcam
[ 8.476628] usb 4-2: Manufacturer: QCM
[ 8.476628] usb 4-2: SerialNumber: SN0001
[ 8.800624] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 8.808625] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1,
addr 00:1e:68:87:4a:4a
[ 8.808625] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq
lnktim msi desc-v3
[ 8.808625] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 8.808625] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] ->
GSI 21 (level, low) -> IRQ 21
[ 8.808625] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 8.889162] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2
[1180:0843] (rev 12)
[ 8.889179] ricoh-mmc: Controller is now disabled.
[ 8.889364] ohci1394 0000:02:05.0: enabling device (0100 -> 0102)
[ 8.889748] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 8.889759] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] ->
GSI 5 (level, low) -> IRQ 5
[ 8.941910] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]
MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.945910] sdhci: SDHCI controller found at 0000:02:05.1
[1180:0822] (rev 22)
[ 8.945910] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 8.945910] ACPI: PCI Interrupt 0000:02:05.1[b] -> Link [LNK2] ->
GSI 7 (level, low) -> IRQ 7
[ 8.949910] mmc0: Will use DMA mode even though HW doesn't fully
claim to support it.
[ 8.949910] mmc0: SDHCI at 0xf6100800 irq 7 DMA
[ 8.949910] Initializing USB Mass Storage driver...
[ 8.953417] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 8.953430] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] ->
GSI 19 (level, low) -> IRQ 19
[ 8.953439] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 8.953484] ath5k_pci 0000:03:00.0: registered as 'phy0'
[ 8.958255] ath5k phy0: Support for RF2425 is under development.
[ 8.996575] phy0: Selected rate control algorithm 'pid'
[ 9.022343] usb 1-4: configuration #1 chosen from 1 choice
[ 9.028201] usb 1-4: New USB device found, idVendor=04d9, idProduct=0499
[ 9.028201] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.164206] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 9.164206] Uniform CD-ROM driver Revision: 3.20
[ 9.276200] Linux video capture interface: v2.00
[ 9.277825] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 9.336199] usb 1-7: new full speed USB device using ohci_hcd and address 4
[ 9.556196] usb 1-7: configuration #1 chosen from 1 choice
[ 9.560200] usb 1-7: New USB device found, idVendor=08ff, idProduct=2580
[ 9.560200] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.560200] usb 1-7: Product: Fingerprint Sensor
[ 9.560200] scsi4 : SCSI emulation for USB Mass Storage devices
[ 9.560200] usb-storage: device found at 2
[ 9.560203] usb-storage: waiting for device to settle before scanning
[ 9.560200] usbcore: registered new interface driver usb-storage
[ 9.560200] USB Mass Storage support registered.
[ 9.564203] usbcore: registered new interface driver hiddev
[ 9.564203] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c)
[ 9.568201] input: HP Webcam as /class/input/input9
[ 9.600201] usbcore: registered new interface driver uvcvideo
[ 9.600201] USB Video Class driver (v0.1.0)
[ 9.608202] input: HID 04d9:0499 as /class/input/input10
[ 9.672196] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on
usb-0000:00:02.0-4
[ 9.672196] usbcore: registered new interface driver usbhid
[ 9.672196] usbhid: v2.6:USB HID core driver
[ 10.180191] Adding 3903784k swap on /dev/sda2. Priority:-1
extents:1 across:3903784k
[ 10.218199] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0052200c01]
[ 10.633471] EXT3 FS on sda1, internal journal
[ 11.305464] loop: module loaded
[ 12.265454] kjournald starting. Commit interval 5 seconds
[ 12.273455] EXT3 FS on sda3, internal journal
[ 12.273455] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.297454] kjournald starting. Commit interval 5 seconds
[ 12.305454] EXT3 FS on sda4, internal journal
[ 12.305454] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.389450] eth0: no link during initialization.
[ 14.569431] usb-storage: device scan complete
[ 14.569431] isa bounce pool size: 16 pages
[ 14.573436] scsi 4:0:0:0: Direct-Access CSD CAW0 80S
PQ: 0 ANSI: 2
[ 14.597431] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 14.601431] sd 4:0:0:0: [sdb] Write Protect is off
[ 14.601431] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 14.601431] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 14.605431] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 14.609431] sd 4:0:0:0: [sdb] Write Protect is off
[ 14.609431] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 14.609431] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 14.609431] sdb: sdb1
[ 14.609431] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 36.625281] pnp: the driver 'parport_pc' has been registered
[ 36.625281] lp: driver loaded but no devices found
[ 36.661318] ppdev: user-space parallel port driver
[ 57.409128] NET: Registered protocol family 10
[ 57.409128] lo: Disabled Privacy Extensions
[ 57.409128] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 220.783933] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1768.015105] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 1808.097588] CPU0 attaching NULL sched-domain.
[ 1808.097588] CPU1 attaching NULL sched-domain.
[ 1808.113582] CPU0 attaching sched-domain:
[ 1808.113582] domain 0: span 0-1
[ 1808.113582] groups: 0 1
[ 1808.113582] domain 1: span 0-1
[ 1808.113582] groups: 0-1
[ 1808.113582] CPU1 attaching sched-domain:
[ 1808.113582] domain 0: span 0-1
[ 1808.113582] groups: 1 0
[ 1808.113582] domain 1: span 0-1
[ 1808.113582] groups: 0-1


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/AANLkTi?X0Qho9rm-+rXjJR-3V5q+P7FaLo+9RMD8J-@mail.gmail.com
 
Old 11-05-2010, 02:43 PM
Andrei Popescu
 
Default Problems configuring wireless with wicd on amd64 lenny

On Vi, 05 nov 10, 15:12:28, Kjetil brinchmann Halvorsen wrote:
> see below.

> 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
> 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)


> [ 8.953484] ath5k_pci 0000:03:00.0: registered as 'phy0'
> [ 8.958255] ath5k phy0: Support for RF2425 is under development.
> [ 8.996575] phy0: Selected rate control algorithm 'pid'

...

> [ 9.277825] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)

Nothing unusual here

> [ 220.783933] ADDRCONF(NETDEV_UP): wlan0: link is not ready

But it doesn't associate. I assume you double-checked your
configuration, especially the passphrase, or switch your AP temporarily
to allow connections without encryption.

You could also try a newer kernel from backports.

Regards,
Andrei
--
Offtopic discussions among Debian users and developers:
http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic
 
Old 11-05-2010, 03:08 PM
Volkan YAZICI
 
Default Problems configuring wireless with wicd on amd64 lenny

Hi,

wicd just parses the outputs of ifconfig/iwconfig/iwlist/wpa_supplicant
commands. Maybe manually executing this sequence may help you to spot
the problem. Here it goes:

# ifconfig wlan0 up

Now, you should be able to see the available list accessible APs:

# iwlist wlan0 scan

If everything is ok so far, proceed to next.

# iwconfig wlan0 essid <ESSID>

Than create an entry in your /etc/wpa_supplicant/wpa_supplicant.conf
file. Take mine as an example:

# cat /etc/wpa_supplicant/wpa_supplicant.conf
...
network={
ssid="<ESSID>"
psk="<PASSPHRASE>"
}

Now cross your fingers and hope wpa_supplicant do the rest:

# wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d

The debugging output should tell you more. Inform us about the progress,
maybe we can help you further.


Regards.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87r5ezrbx2.fsf@alamut.ozu.edu.tr">http://lists.debian.org/87r5ezrbx2.fsf@alamut.ozu.edu.tr
 
Old 11-05-2010, 03:22 PM
Volkan YAZICI
 
Default Problems configuring wireless with wicd on amd64 lenny

On Fri, 05 Nov 2010, Volkan YAZICI <yazicivo@ttmail.com> writes:
> Now cross your fingers and hope wpa_supplicant do the rest:
>
> # wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d
>
> The debugging output should tell you more. Inform us about the progress,
> maybe we can help you further.

And of course after you see "completed" in the wpa_supplicant output,
then just issue a

# dhclient wlan0

to get an IP address from the AP.


Regards.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87mxpnrb8v.fsf@alamut.ozu.edu.tr">http://lists.debian.org/87mxpnrb8v.fsf@alamut.ozu.edu.tr
 
Old 11-05-2010, 07:32 PM
Rob Owens
 
Default Problems configuring wireless with wicd on amd64 lenny

On Thu, Nov 04, 2010 at 10:27:45PM -0300, Kjetil brinchmann Halvorsen wrote:
> I have just installed lenny from cd-1 (5.0.6), but I cannot get wireless network
> to work. I have installed wicd from lenny-backports, and followed the
> instructions on
> the page
> http://wiki.debian.org/WiFi/HowToUse
> but wicd does not recognize the wireless network (which is there,
> I am sending this via it, from a live cd of ubuntu).
>
>
> Any ideas?
>
If you haven't already, you need to set the wireless interface device in
wicd's preferences. To find out what device name to use, run
/sbin/iwconfig and look for "eth1" or "wlan0" or something similar.

-Rob


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20101105203238.GE10017@aurora.owens.net">http://lists.debian.org/20101105203238.GE10017@aurora.owens.net
 
Old 11-06-2010, 12:33 AM
Kjetil brinchmann Halvorsen
 
Default Problems configuring wireless with wicd on amd64 lenny

see below.

On Fri, Nov 5, 2010 at 13:08, Volkan YAZICI <yazicivo@ttmail.com> wrote:
> Hi,
>
> wicd just parses the outputs of ifconfig/iwconfig/iwlist/wpa_supplicant
> commands. Maybe manually executing this sequence may help you to spot
> the problem. Here it goes:
>
> *# ifconfig wlan0 up
>
> Now, you should be able to see the available list accessible APs:
>
> *# iwlist wlan0 scan
>
> If everything is ok so far, proceed to next.
>
> *# iwconfig wlan0 essid <ESSID>
>
> Than create an entry in your /etc/wpa_supplicant/wpa_supplicant.conf
> file. Take mine as an example:
>
> *# cat /etc/wpa_supplicant/wpa_supplicant.conf
> *...
> *network={
> * * *ssid="<ESSID>"
> * * *psk="<PASSPHRASE>"
> *}
>
> Now cross your fingers and hope wpa_supplicant do the rest:
>
> *# wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d
>
> The debugging output should tell you more. Inform us about the progress,
> maybe we can help you further.
>
I tried this, here is how long I got:

: ifconfig wlan0 up
succeeds, do not print anything.
: iwlist wlan0 scan
wlan0 No scan results.
: iwconfig wlan0 essis ""
do not print anything
:
: Now I wrote the file /etc/wpa_supplicant/wpa_supplicant.conf, as follows:
(I have problems with the keyboard on this live CD, I cannot
write braces, so instead i write the words leftbrace rightbrace)
network= leftbrace
ssid = ""
psk = ""
rightbrace

(my wireless network do not use encryption)

: wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d

which prints:
kjetil:/home/kjetil# wpa_supplicant -c
/etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d
Initializing interface 'wlan0' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default'
ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
Line 1: Invalid configuration line 'network = {'.
Line 2: Invalid configuration line 'ssid = ""'.
Line 3: Invalid configuration line 'psk = ""'.
Line 4: Invalid configuration line '}'.
Failed to read or parse configuration '/etc/wpa_supplicant/wpa_supplicant.conf'.
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout


---

Thats as far as I got.

Kjetil (still working on installing a new kernel from testing)




>
> Regards.
>



--
"If you want a picture of the future - imagine a boot stamping on the
human face - forever."

George Orwell (1984)


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTin2r38Yf6fmmycgXPLgQ1SA41s2sh9i+o-GJSr-@mail.gmail.com">http://lists.debian.org/AANLkTin2r38Yf6fmmycgXPLgQ1SA41s2sh9i+o-GJSr-@mail.gmail.com
 
Old 11-06-2010, 09:41 AM
Volkan YAZICI
 
Default Problems configuring wireless with wicd on amd64 lenny

On Fri, 5 Nov 2010, Kjetil brinchmann Halvorsen <kjetil1001@gmail.com> writes:
> : ifconfig wlan0 up
> succeeds, do not print anything.
> : iwlist wlan0 scan
> wlan0 No scan results.

There is a problem at this point. It should have been listing available
APs in your range. I can think of two reasons:

- Some notebook models (e.g. Lenovo 3000 series) have a wireless switch
on their outer surface. You need to turn this on to be able make
wireless network card tx/rx radio packages.

- You still couldn't manage to install the card drivers properly.

[Continue reading...]

On Fri, 5 Nov 2010, Kjetil brinchmann Halvorsen <kjetil1001@gmail.com> writes:
> 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

I think there is a problem here. Would you mind checking this by sending
us "lspci -vnn" and "dmesg" messages produced by Ubuntu GNU/Linux Live?
(Please do not wrap lines in the outputs while sending the message.)
168c:001c appears[1] to be supported by ath5k, but I wonder what trick
we are missing that Ubuntu successfully does.


Regards.

[1] http://linuxwireless.org/en/users/Drivers/ath5k#supported_chips


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87eiayspii.fsf@alamut.ozu.edu.tr">http://lists.debian.org/87eiayspii.fsf@alamut.ozu.edu.tr
 

Thread Tools




All times are GMT. The time now is 03:12 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org