Linux Archive

Linux Archive (
-   Debian User (
-   -   Squeeze NetInstal broke on Ethernet controller detection (

Scott Ferguson 09-26-2010 02:37 PM

Squeeze NetInstal broke on Ethernet controller detection
On 26/09/10 22:57, Willy Lambert wrote:
> Hi all,
> I am quite new with using community supports so please be patient and
> let me learn if something is wrong. Be sure that I search a week on the
> net to find a solution. I'm desesperated :)
> *
> *
> *summary :*
> I am trying to install a Debian "Squeeze" distribution with a netinstall
> on a CD media but the installation failed when detected the ethernet
> card (despite it should work with the e1000e driver which is included in
> Debian). It tried to go further without LAN, but seems to be an infite
> chain of problems : if I want to compile the driver I need to "apt-get"
> build tools for which I need Internet... So my strategy is to make the
> installer working.
> *hardware :*
> The target is an Advantech PCM-3362 card (quite the same content as a
> netbook without the wifi in a PC104 size)
> the aim is to embedded it in a mobile robot.
> Its Ethernet controller is an Intel 82567V, which should be working with
> an e1000e driver
> ang=eng
> < ang=eng>
> You can find here a detailed article about the Advantech board, in
> particular its bus and component architecture at the end :
> lspci shows :
> 00:19.0 Ethernet controller : Intel Corporation 82567V-3 Gigabit Network
> Connection (rev 04)
> 00.1e.0 PCI bridge : Intel Corporation 82801 Mobile PCI Bridge (rev f4)
> and other things
> *details :*
> The installer broke when detecting the ethernet controller. I have a
> menu in which I can choose "e1000e" (and also "e100" "e1000"). when I
> choose it, the screen became blue, things happens (see below) and then
> the menu is back again as if it has not found my controller
> In the the fourth console (ctrl+f4=installer log) I can read after
> hiting "e1000e" in the menu when "things happens":
> _ ${date} kernel [$[time]] e1000e : Intel (R) PRO/1000 Network Driver
> -
> _ ${date} kernel [$[time]] e1000e : Copyrigth (c) 1999-20008 Intel
> Corporation
> _ ethdetect : insmod
> /lib/modules/2.6.30-2-484/kernel/drivers/net/e1000e/e1000e.ko
> when I test in the installer console (ctrl+f2 or ctrl+f3) lsmod, I found
> the e1000e module (it was not here before I choose it in the ethernet
> detection menu). So everything seems to be correct.
> I used an i386 version of debian whereas my CPU is an Atom 64b, I don't
> know if this is problematic
> *help :*
> So anyone could help me finding why this menu don't want to select my
> controller ?
> thanks in advance for your attention

Are you sure about your CPU?
I make it as an Atom N450:-
in which case you "might" get more mileage with amd64....

Appears that some parts of the board are non-standard:-

I could tell you more about the nic if I could just get the *&&^%$!
website to let me download the driver :-X
You might fare better than I:-


There is no path to where no others have gone

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact

All times are GMT. The time now is 05:15 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.