FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 01-10-2008, 09:08 AM
Anders Nordby
 
Default Problems scanning past LUN 7 during boot

Hi,

I have a QLA2432 dual path fibre channel adapter connected with two
links to a Hitachi SAN. I run Debian GNU/Linux 4.0 (etch) with 2.6.18
(64-bit) kernel. Firmware is firmware-qlogic 0.4 from Debian stable
repository (http://packages.debian.org/etch/firmware-qlogic). The driver
version in the kernel I use seems to be: QLogic Fibre Channel HBA
Driver: 8.01.07-k1.

Now, my problem is scanning past LUN 7. I can see disks with LUN up to 7
just fine. Also I can manually add LUNS with this command:

echo "scsi add-single-device 0 0 0 8" >/proc/scsi/scsi
echo "scsi add-single-device 0 0 1 8" >/proc/scsi/scsi

This adds LUN 8 on both links.

But how do I add scanning past LUN 7 in a proper way so that its done
during boot? I want to be able to reboot and get all LUNs scanned in
time for LVM to be able to use all disks without manual intervention.

I tried adding max_scsi_luns=<n> as a kernel option in the grub setup,
but it did not help.

Any ideas?

Bye,

--
Anders.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 03:56 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org