FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 01-28-2010, 03:29 AM
godo
 
Default My Sid box is lost Module p80211

Hi all,
I have to manage WiFi on my up to date Sin [lenovo s10e (Broadcom-of
course)] with http://wiki.debian.org/wl#Sid instructions.

Everything was just fine until rebooting before two days ago.

WiFi is stop working, actually he see other networks with 20% quality.
In the same time IBM R51 (Squeeze) see much more networks and same
networks have much better quality.


Google search wasn't enlightening at all, i found lot's p80211 problem
but I'm not sure are this solutions write for me.

Any help is appreciate.

Here are some outputs:

# ifup wlan0
FATAL: Module p80211 not found.
Failed to load p80211.ko.
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with
return code 1

ioctl[SIOCGIFFLAGS]: No such device
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.

---------------------------------------------------------------------

# lsmod
Module Size Used by
b43legacy 91536 0
b43 132341 0
ssb 33327 2 b43legacy,b43
mmc_core 38095 2 b43,ssb
pcmcia 17442 2 b43,ssb
rng_core 2178 2 b43legacy,b43
mac80211 121381 2 b43legacy,b43
cfg80211 86910 3 b43legacy,b43,mac80211
led_class 1757 2 b43legacy,b43
pcmcia_core 20406 3 b43,ssb,pcmcia
i915 217023 2
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
uinput 4796 1
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 4
l2cap 21677 16 bnep,rfcomm
crc16 1027 1 l2cap
acpi_cpufreq 4907 0
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1444 0
microcode 8374 0
fuse 43554 3
snd_hda_codec_realtek 162851 1
snd_hda_intel 15263 4
snd_hda_codec 45998 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47350 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3480 0
btusb 7997 2
snd_rawmidi 12313 1 snd_seq_midi
uvcvideo 45194 0
snd_seq_midi_event 3684 1 snd_seq_midi
bluetooth 36259 9 sco,bnep,rfcomm,l2cap,btusb
snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event
videodev 25445 1 uvcvideo
joydev 6771 0
snd_timer 12258 2 snd_pcm,snd_seq
v4l1_compat 10250 2 uvcvideo,videodev
rfkill 10196 3 cfg80211,bluetooth
lib80211_crypt_tkip 6677 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 33551 19
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device


wl 1256423 0
i2c_i801 6442 0
soundcore 3450 1 snd
serio_raw 2916 0
lib80211 2834 2 lib80211_crypt_tkip,wl
i2c_core 12612 5 i915,drm,i2c_algo_bit,videodev,i2c_i801
psmouse 44409 0
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
evdev 5609 24
pcspkr 1207 0
processor 25803 3 acpi_cpufreq
battery 3782 0
ac 1640 0
ext3 93828 1
jbd 31965 1 ext3
mbcache 3762 1 ext3
usbhid 26784 0
hid 50545 1 usbhid
ide_gd_mod 17103 2
sd_mod 25717 3
crc_t10dif 1012 1 sd_mod
usb_storage 29825 0
ata_generic 2015 0
ide_pci_generic 1924 0
video 14605 1 i915
ata_piix 16513 3
uhci_hcd 15953 0
intel_agp 20145 1
piix 3564 1
libata 113728 2 ata_generic,ata_piix
tg3 88049 0
output 1204 1 video
libphy 11238 1 tg3
agpgart 19516 2 drm,intel_agp
ide_core 63850 3 ide_gd_mod,ide_pci_generic,piix
ehci_hcd 27230 0
scsi_mod 101073 3 sd_mod,usb_storage,libata
usbcore 97930 7
btusb,uvcvideo,usbhid,usb_storage,uhci_hcd,ehci_hc d

nls_base 4541 1 usbcore
button 3598 1 i915
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan

---------------------------------------------------------------------

# modprobe p80211; echo $?
FATAL: Module p80211 not found.
1

---------------------------------------------------------------------

# /etc/init.d/networking start
...
Configuring network interfaces...FATAL: Module p80211 not found.
Failed to load p80211.ko.
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with
return code 1

ioctl[SIOCGIFFLAGS]: No such device
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.
done.

Thank you all for help,
Goran Dobosevic


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-28-2010, 07:44 PM
Celejar
 
Default My Sid box is lost Module p80211

On Thu, 28 Jan 2010 05:29:07 +0100
godo <goran@dobosevic.com> wrote:

> Hi all,
> I have to manage WiFi on my up to date Sin [lenovo s10e (Broadcom-of
> course)] with http://wiki.debian.org/wl#Sid instructions.
> Everything was just fine until rebooting before two days ago.
>
> WiFi is stop working, actually he see other networks with 20% quality.
> In the same time IBM R51 (Squeeze) see much more networks and same
> networks have much better quality.
>
> Google search wasn't enlightening at all, i found lot's p80211 problem
> but I'm not sure are this solutions write for me.
> Any help is appreciate.
>
> Here are some outputs:
>
> # ifup wlan0
> FATAL: Module p80211 not found.
> Failed to load p80211.ko.
> run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with
> return code 1
> ioctl[SIOCGIFFLAGS]: No such device

[snip]

Well, nothing else is going to work if the appropriate module isn't
being loaded. Let's start from the beginning: what HW do you have
(relevant output of lspci / dmesg)?

Celejar
--
foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solver and Generator


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-29-2010, 12:56 AM
"goran@dobosevic.com"
 
Default My Sid box is lost Module p80211

Celejar wrote:

On Thu, 28 Jan 2010 05:29:07 +0100
godo <goran@dobosevic.com> wrote:


Hi all,
I have to manage WiFi on my up to date Sin [lenovo s10e (Broadcom-of
course)] with http://wiki.debian.org/wl#Sid instructions.

Everything was just fine until rebooting before two days ago.

WiFi is stop working, actually he see other networks with 20% quality.
In the same time IBM R51 (Squeeze) see much more networks and same
networks have much better quality.


Google search wasn't enlightening at all, i found lot's p80211 problem
but I'm not sure are this solutions write for me.

Any help is appreciate.

Here are some outputs:

# ifup wlan0
FATAL: Module p80211 not found.
Failed to load p80211.ko.
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with
return code 1

ioctl[SIOCGIFFLAGS]: No such device


[snip]

Well, nothing else is going to work if the appropriate module isn't
being loaded. Let's start from the beginning: what HW do you have
(relevant output of lspci / dmesg)?

Celejar


Hi,
here it is:

$lspci -nn | grep Broadcom
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink
BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
05:00.0 Network controller [0280]: Broadcom Corporation BCM4312
802.11b/g [14e4:4315] (rev 01)


-------------------------------------------

$dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5)
(ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun
Jan 10 06:32:16 UTC 2010

[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106

[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 2f1c0000 - 2f95b0a8
[ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6dac38 00084 (v01 LENOVO CB-01 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1bd7 000F4 (v03 INTEL CALISTGA 06040000
ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6dbe3a 05D29 (v01 INTEL CALISTGA 06040000
INTL 20061109)

[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1ccb 00038 (v01 INTEL CALISTGA 06040000
LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1d03 0003C (v01 INTEL CALISTGA 06040000
LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1d3f 00032 (v01 PTLTD CALISTGA 06040000
PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1d71 00026 (v01 PTLTD 06040000
PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1d97 00068 (v01 PTLTD ? APIC 06040000
LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1dff 00028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] ACPI: SLIC 3f6e1e27 00176 (v01 LENOVO CB-01 06040000
LTP 00000000)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000
PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6db258 0025F (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6db1b2 000A6 (v01 PmRef Cpu1Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6dacbc 004F6 (v02 PmRef CpuPm 00003000
INTL 20050624)

[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==>
[0001000000 - 00014a1334]
[ 0.000000] #4 [002f1c0000 - 002f95b0a8] RAMDISK ==>
[002f1c0000 - 002f95b0a8]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==>
[000009f800 - 0000100000]
[ 0.000000] #6 [00014a2000 - 00014a8210] BRK ==>
[00014a2000 - 00014a8210]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==>
[0000009000 - 0000010000]

[ 0.000000] found SMP MP-table at [c00f7b70] f7b70
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259695
[ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map
c14aa000

[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 33228 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 -
00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:a0000000)

[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272
u2097152

[ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 257665
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686
root=UUID=e9b72294-f851-4bd1-9345-044c0f45d227 ro quiet

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)

[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f6d0)
[ 0.000000] Memory: 1016588k/1039168k available (2414k kernel code,
21656k reserved, 1266k data, 368k init, 133960k highmem)

[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
[ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1

[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer

[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.278 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3192.55 BogoMIPS (lpj=6385112)

[ 0.004045] Security Framework initialized
[ 0.004053] SELinux: Disabled at boot.
[ 0.004067] Mount-cache hash table entries: 512
[ 0.004288] Initializing cgroup subsys ns
[ 0.004297] Initializing cgroup subsys cpuacct
[ 0.004305] Initializing cgroup subsys devices
[ 0.004311] Initializing cgroup subsys freezer
[ 0.004316] Initializing cgroup subsys net_cls
[ 0.004349] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004355] CPU: L2 cache: 512K
[ 0.004360] CPU: Physical Processor ID: 0
[ 0.004364] CPU: Processor Core ID: 0
[ 0.004371] mce: CPU supports 5 MCE banks
[ 0.004385] CPU0: Thermal monitoring handled by SMI
[ 0.004392] using mwait in idle threads.
[ 0.004403] Performance Events: Atom events, Intel PMU driver.
[ 0.004416] ... version: 3
[ 0.004420] ... bit width: 40
[ 0.004424] ... generic registers: 2
[ 0.004428] ... value mask: 000000ffffffffff
[ 0.004432] ... max period: 000000007fffffff
[ 0.004437] ... fixed-purpose events: 3
[ 0.004441] ... event mask: 0000000700000003
[ 0.004449] Checking 'hlt' instruction... OK.
[ 0.021651] ACPI: Core revision 20090903
[ 0.036561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079784] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 3191.93
BogoMIPS (lpj=6383875)

[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.164129] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.164158] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168079] Brought up 2 CPUs
[ 0.168087] Total of 2 processors activated (6384.49 BogoMIPS).
[ 0.168316] CPU0 attaching sched-domain:
[ 0.168324] domain 0: span 0-1 level SIBLING
[ 0.168330] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.168342] domain 1: span 0-1 level MC
[ 0.168347] groups: 0-1 (cpu_power = 1178)
[ 0.168358] CPU1 attaching sched-domain:
[ 0.168363] domain 0: span 0-1 level SIBLING
[ 0.168368] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.168379] domain 1: span 0-1 level MC
[ 0.168384] groups: 0-1 (cpu_power = 1178)
[ 0.168711] devtmpfs: initialized
[ 0.169503] regulator: core version 0.5
[ 0.169619] NET: Registered protocol family 16
[ 0.169803] ACPI: bus type pci registered
[ 0.169935] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255

[ 0.169942] PCI: MCFG area at e0000000 reserved in E820
[ 0.169946] PCI: Using MMCONFIG for extended config space
[ 0.169950] PCI: Using configuration type 1 for base access
[ 0.170774] bio: create slab <bio-0> at 0
[ 0.172194] ACPI: EC: Look up EC in DSDT
[ 0.176548] ACPI: BIOS _OSI(Linux) query ignored
[ 0.184208] ACPI: Interpreter enabled
[ 0.184251] ACPI: (supports S0 S3 S4 S5)
[ 0.184296] ACPI: Using IOAPIC for interrupt routing
[ 0.205896] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.206370] ACPI: No dock devices found.
[ 0.207397] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.207533] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0500000-0xf057ffff]
[ 0.207544] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.207553] pci 0000:00:02.0: reg 18 32bit mmio pref:
[0xd0000000-0xdfffffff]

[ 0.207562] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0600000-0xf063ffff]
[ 0.207614] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0580000-0xf05fffff]
[ 0.207749] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff]
[ 0.207820] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.207828] pci 0000:00:1b.0: PME# disabled
[ 0.207937] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.207945] pci 0000:00:1c.0: PME# disabled
[ 0.208070] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.208078] pci 0000:00:1c.1: PME# disabled
[ 0.208188] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.208196] pci 0000:00:1c.2: PME# disabled
[ 0.208282] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.208368] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.208450] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.208535] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.208624] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0844000-0xf08443ff]
[ 0.208703] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208712] pci 0000:00:1d.7: PME# disabled
[ 0.208901] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
ACPI/GPIO/TCO
[ 0.208910] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6
GPIO
[ 0.208921] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
0380 (mask 0007)

[ 0.208991] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.209004] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.209016] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.209029] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.209042] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.209112] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.209124] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.209136] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.209148] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.209160] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.209173] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0844400-0xf08447ff]
[ 0.209208] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.209216] pci 0000:00:1f.2: PME# disabled
[ 0.209286] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.209556] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff]
[ 0.209799] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.209813] pci 0000:02:00.0: PME# disabled
[ 0.209923] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.209932] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.209945] pci 0000:00:1c.0: bridge 64bit mmio pref:
[0xf0000000-0xf00fffff]

[ 0.210013] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.210022] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[ 0.210034] pci 0000:00:1c.1: bridge 64bit mmio pref:
[0xf0100000-0xf01fffff]

[ 0.210404] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.210629] pci 0000:05:00.0: supports D1 D2
[ 0.210634] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.210649] pci 0000:05:00.0: PME# disabled
[ 0.210794] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.210880] pci 0000:00:1e.0: transparent bridge
[ 0.210924] pci_bus 0000:00: on NUMA node 0
[ 0.210935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.211336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.211489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.211638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.211827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.224869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.225055] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12
14 15)
[ 0.225237] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12
14 15)
[ 0.225418] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.225601] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.225785] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.225968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[ 0.226149] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12
14 15)
[ 0.226340] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none

[ 0.226362] vgaarb: loaded
[ 0.226514] PCI: Using ACPI for IRQ routing
[ 0.227276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.227287] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232048] Switching to clocksource tsc
[ 0.234235] pnp: PnP ACPI init
[ 0.234274] ACPI: bus type pnp registered
[ 0.239827] pnp: PnP ACPI: found 10 devices
[ 0.239833] ACPI: ACPI bus type pnp unregistered
[ 0.239841] PnPBIOS: Disabled by ACPI PNP
[ 0.239879] system 00:01: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.239887] system 00:01: iomem range 0xfed14000-0xfed17fff has been
reserved
[ 0.239895] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.239902] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.239910] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.239917] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.239925] system 00:01: iomem range 0xfed40000-0xfed44fff has been
reserved
[ 0.239933] system 00:01: iomem range 0xfed45000-0xfed8ffff has been
reserved
[ 0.239947] system 00:03: iomem range 0xfed00000-0xfed003ff has been
reserved

[ 0.239962] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.239970] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.239977] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.239984] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.239991] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.239998] system 00:05: ioport range 0x380-0x384 has been reserved
[ 0.240006] system 00:05: ioport range 0x386-0x387 has been reserved
[ 0.240018] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.240025] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.275063] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.275072] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.275083] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf02fffff
[ 0.275092] pci 0000:00:1c.0: PREFETCH window:
0x000000f0000000-0x000000f00fffff

[ 0.275104] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.275111] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.275121] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff
[ 0.275129] pci 0000:00:1c.1: PREFETCH window:
0x000000f0100000-0x000000f01fffff

[ 0.275142] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.275149] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.275159] pci 0000:00:1c.2: MEM window: 0xf0400000-0xf04fffff
[ 0.275168] pci 0000:00:1c.2: PREFETCH window:
0x00000040000000-0x000000401fffff

[ 0.275180] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.275184] pci 0000:00:1e.0: IO window: disabled
[ 0.275193] pci 0000:00:1e.0: MEM window: disabled
[ 0.275200] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.275232] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.275241] pci 0000:00:1c.0: setting latency timer to 64
[ 0.275260] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.275268] pci 0000:00:1c.1: setting latency timer to 64
[ 0.275286] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.275294] pci 0000:00:1c.2: setting latency timer to 64
[ 0.275307] pci 0000:00:1e.0: setting latency timer to 64
[ 0.275317] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.275323] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.275330] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.275336] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff]
[ 0.275342] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff]
[ 0.275349] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.275355] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff]
[ 0.275361] pci_bus 0000:03: resource 2 pref mem [0xf0100000-0xf01fffff]
[ 0.275368] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 0.275374] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.275381] pci_bus 0000:05: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.275387] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.275393] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.275458] NET: Registered protocol family 2
[ 0.275657] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.276299] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)

[ 0.277253] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.277739] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.277746] TCP reno registered
[ 0.277951] NET: Registered protocol family 1
[ 0.277996] pci 0000:00:02.0: Boot video device
[ 0.278232] Unpacking initramfs...
[ 0.658825] Freeing initrd memory: 7788k freed
[ 0.666457] Simple Boot Flag at 0x36 set to 0x1
[ 0.667105] audit: initializing netlink socket (disabled)
[ 0.667128] type=2000 audit(1264693584.663:1): initialized
[ 0.667436] highmem bounce pool size: 64 pages
[ 0.667446] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.670624] VFS: Disk quotas dquot_6.5.2
[ 0.670750] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.670902] msgmni has been set to 1740
[ 0.671305] alg: No test for stdrng (krng)
[ 0.671422] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)

[ 0.671428] io scheduler noop registered
[ 0.671433] io scheduler anticipatory registered
[ 0.671437] io scheduler deadline registered
[ 0.671518] io scheduler cfq registered (default)
[ 0.671775] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.671795] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.672032] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.672048] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.672270] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.672285] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.672599] efifb: probing for efifb
[ 0.672693] efifb: framebuffer at 0xd0000000, mapped to 0xf7c80000,
using 1200k, total 1200k

[ 0.672700] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.672704] efifb: scrolling: redraw
[ 0.672710] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.689379] Console: switching to colour frame buffer device 80x30
[ 0.705840] fb0: EFI VGA frame buffer device
[ 0.705895] isapnp: Scanning for PnP cards...
[ 1.060351] isapnp: No Plug & Play device found
[ 1.063555] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.064305] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.081943] Failed to disable AUX port, but continuing anyway... Is
this a SiS?
[ 1.081948] If AUX port is really absent please use the 'i8042.noaux'
option.

[ 1.105966] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.105980] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.106141] mice: PS/2 mouse device common for all mice
[ 1.106189] Driver 'rtc_cmos' needs updating - please use bus_type
methods

[ 1.106235] rtc_cmos 00:07: RTC can wake from S4
[ 1.106325] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.106372] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.106399] cpuidle: using governor ladder
[ 1.106405] cpuidle: using governor menu
[ 1.106415] No iBFT detected.
[ 1.107411] TCP cubic registered
[ 1.107813] NET: Registered protocol family 10
[ 1.108841] lo: Disabled Privacy Extensions
[ 1.109556] Mobile IPv6
[ 1.109563] NET: Registered protocol family 17
[ 1.109595] Using IPI No-Shortcut mode
[ 1.109763] registered taskstats version 1
[ 1.110712] rtc_cmos 00:07: setting system clock to 2010-01-28
15:46:25 UTC (1264693585)

[ 1.110866] Freeing unused kernel memory: 368k freed
[ 1.111154] Write protecting the kernel text: 2416k
[ 1.111195] Write protecting the kernel read-only data: 872k
[ 1.136875] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0

[ 1.341470] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.341488] ACPI: Thermal Zone [TZ00] (57 C)
[ 1.505549] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[ 1.505567] ACPI: Power Button [PWRB]
[ 1.505766] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2

[ 1.505780] ACPI: Sleep Button [SLPB]
[ 1.505986] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3

[ 1.605229] ACPI: Lid Switch [LID]
[ 1.605512] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 1.605528] ACPI: Power Button [PWRF]
[ 1.615559] Linux agpgart interface v0.103
[ 1.621255] acpi device:03: registered as cooling_device0
[ 1.621737] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.621758] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)

[ 1.642030] usbcore: registered new interface driver usbfs
[ 1.642229] usbcore: registered new interface driver hub
[ 1.643061] usbcore: registered new device driver usb
[ 1.700653] SCSI subsystem initialized
[ 1.703270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.703346] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23

[ 1.703391] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.703402] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.703461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1

[ 1.703509] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.703531] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.707426] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.707462] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 1.720028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.720115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.720124] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 1.720133] usb usb1: Product: EHCI Host Controller
[ 1.720140] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 1.720148] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.720518] usb usb1: configuration #1 chosen from 1 choice
[ 1.720727] hub 1-0:1.0: USB hub found
[ 1.720753] hub 1-0:1.0: 8 ports detected
[ 1.725095] Uniform Multi-Platform E-IDE driver
[ 1.755683] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.756072] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.759171] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.825921] libata version 3.00 loaded.
[ 1.826264] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.826301] PIIX_IDE 0000:00:1f.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19

[ 1.826325] piix 0000:00:1f.1: IDE port disabled
[ 1.826348] piix 0000:00:1f.1: not 100% native mode: will probe irqs
later

[ 1.826363] ide0: BM-DMA at 0x1810-0x1817
[ 1.826379] Probing IDE interface ide0...
[ 1.840725] tg3.c:v3.102 (September 1, 2009)
[ 1.840807] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.840831] tg3 0000:02:00.0: setting latency timer to 64
[ 1.847719] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.088087] usb 1-3: new high speed USB device using ehci_hcd and
address 3

[ 2.113399] hda: SSD 4G, CFA DISK drive
[ 2.150667] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express)
MAC address 00:23:8b:35:17:a0
[ 2.150675] eth0: attached PHY is 5906 (10/100Base-TX Ethernet)
(WireSpeed[0])

[ 2.150682] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 2.150688] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.393926] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
[ 2.393942] usb 1-3: New USB device strings: Mfr=3, Product=1,
SerialNumber=0

[ 2.393955] usb 1-3: Product: Lenovo EasyCamera
[ 2.393964] usb 1-3: Manufacturer: BISON Corporation
[ 2.394174] usb 1-3: configuration #1 chosen from 1 choice
[ 2.449230] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.449298] hda: UDMA/100 mode selected
[ 2.449394] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.461492] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23

[ 2.461512] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.461521] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.461564] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2

[ 2.461613] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.461724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.461733] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 2.461741] usb usb2: Product: UHCI Host Controller
[ 2.461748] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 2.461755] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.461991] usb usb2: configuration #1 chosen from 1 choice
[ 2.462084] hub 2-0:1.0: USB hub found
[ 2.462104] hub 2-0:1.0: 2 ports detected
[ 2.462257] ata_piix 0000:00:1f.2: version 2.13
[ 2.462295] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19

[ 2.462308] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 2.616103] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.616269] scsi0 : ata_piix
[ 2.616473] scsi1 : ata_piix
[ 2.616602] ata1: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma
0x18b0 irq 19
[ 2.616611] ata2: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma
0x18b8 irq 19
[ 2.616832] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19

[ 2.616851] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.616860] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.616895] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3

[ 2.616947] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 2.617076] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.617085] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 2.617093] usb usb3: Product: UHCI Host Controller
[ 2.617100] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 2.617107] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.617316] usb usb3: configuration #1 chosen from 1 choice
[ 2.617392] hub 3-0:1.0: USB hub found
[ 2.617409] hub 3-0:1.0: 2 ports detected
[ 2.617733] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18

[ 2.617754] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.617764] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.617791] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4

[ 2.617858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.617972] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.617982] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 2.617989] usb usb4: Product: UHCI Host Controller
[ 2.617996] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 2.618004] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.618249] usb usb4: configuration #1 chosen from 1 choice
[ 2.618358] hub 4-0:1.0: USB hub found
[ 2.618381] hub 4-0:1.0: 2 ports detected
[ 2.618879] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16

[ 2.618903] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.618913] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.618945] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5

[ 2.619017] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 2.619128] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.619137] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 2.619145] usb usb5: Product: UHCI Host Controller
[ 2.619152] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 2.619160] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.619393] usb usb5: configuration #1 chosen from 1 choice
[ 2.619500] hub 5-0:1.0: USB hub found
[ 2.619522] hub 5-0:1.0: 2 ports detected
[ 2.652097] usb 1-5: new high speed USB device using ehci_hcd and
address 5
[ 2.784128] ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC4EC, max
UDMA/100

[ 2.784145] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.795231] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[ 2.795245] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[ 2.795257] usb 1-5: Product: USB2.0-CRW
[ 2.795266] usb 1-5: Manufacturer: Generic
[ 2.795275] usb 1-5: SerialNumber: 20071114173400000
[ 2.795490] usb 1-5: configuration #1 chosen from 1 choice
[ 2.800768] ata1.00: configured for UDMA/100
[ 2.800976] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54321
FB2Z PQ: 0 ANSI: 5

[ 2.830281] ide-gd driver 1.18
[ 2.830367] hda: max request size: 128KiB
[ 2.830376] hda: 7880544 sectors (4034 MB) w/1KiB Cache, CHS=7818/16/63
[ 2.830482] hda: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }

[ 2.831281] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[ 2.831953] hda: possibly failed opcode: 0xef
[ 2.832598] hda: hda1
[ 2.842212] Initializing USB Mass Storage driver...
[ 2.852827] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)

[ 2.853000] sd 0:0:0:0: [sda] Write Protect is off
[ 2.853010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.853101] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA

[ 2.853568] sda:
[ 2.853908] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.854154] usbcore: registered new interface driver usb-storage
[ 2.854165] USB Mass Storage support registered.
[ 2.854181] usb-storage: device found at 5
[ 2.854186] usb-storage: waiting for device to settle before scanning
[ 2.877588] sda1 sda2 < sda5 >
[ 2.907738] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.913111] usb 2-2: new low speed USB device using uhci_hcd and
address 2

[ 3.088615] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
[ 3.088631] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0

[ 3.088644] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 3.088653] usb 2-2: Manufacturer: Logitech
[ 3.088879] usb 2-2: configuration #1 chosen from 1 choice
[ 3.118225] usbcore: registered new interface driver hiddev
[ 3.132323] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
[ 3.132634] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0

[ 3.132690] usbcore: registered new interface driver usbhid
[ 3.132944] usbhid: v2.6:USB HID core driver
[ 3.200133] usb 3-2: new full speed USB device using uhci_hcd and
address 2

[ 3.293388] kjournald starting. Commit interval 5 seconds
[ 3.293423] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.378944] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
[ 3.378956] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[ 3.378966] usb 3-2: Product: BCM2046 Bluetooth Device
[ 3.378973] usb 3-2: Manufacturer: Broadcom Corp
[ 3.378980] usb 3-2: SerialNumber: 00242CFD493C
[ 3.379223] usb 3-2: configuration #1 chosen from 1 choice
[ 6.959044] udev: starting version 150
[ 7.852397] usb-storage: device scan complete
[ 7.854387] scsi 2:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS

[ 7.859220] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.662220] ACPI: SSDT 3f6dbb21 00245 (v02 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 8.663342] ACPI: SSDT 3f6db4b7 005E5 (v02 PmRef Cpu0Cst 00003001
INTL 20050624)

[ 8.721979] Monitor-Mwait will be used to enter C-1 state
[ 8.722079] Monitor-Mwait will be used to enter C-2 state
[ 8.722151] Monitor-Mwait will be used to enter C-3 state
[ 8.722172] Marking TSC unstable due to TSC halts in idle
[ 8.722534] processor LNXCPU:00: registered as cooling_device1
[ 8.723684] ACPI: SSDT 3f6dbd66 000D4 (v02 PmRef Cpu1Ist 00003000
INTL 20050624)
[ 8.724587] ACPI: SSDT 3f6dba9c 00085 (v02 PmRef Cpu1Cst 00003000
INTL 20050624)

[ 8.725760] Switching to clocksource hpet
[ 8.761449] processor LNXCPU:01: registered as cooling_device2
[ 8.792042] ACPI: AC Adapter [ACAD] (on-line)
[ 8.876618] ACPI: Battery Slot [BAT0] (battery present)
[ 9.105623] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.699659] lib80211: common routines for IEEE802.11 drivers
[ 9.699670] lib80211_crypt: registered algorithm 'NULL'
[ 9.754695] intel_rng: FWH not detected
[ 9.784115] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 9.784130] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts
with ACPI region SMBI [0x18e0-0x18ef]
[ 9.810876] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 10.101341] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
[ 10.204259] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input8

[ 10.355077] wl: module license 'MIXED/Proprietary' taints kernel.
[ 10.355086] Disabling lock debugging due to kernel taint
[ 10.365258] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.365280] wl 0000:05:00.0: setting latency timer to 64
[ 10.755648] lib80211_crypt: registered algorithm 'TKIP'
[ 10.756319] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
[ 11.693490] Bluetooth: Core ver 2.15
[ 11.701427] NET: Registered protocol family 31
[ 11.701434] Bluetooth: HCI device and connection manager initialized
[ 11.701441] Bluetooth: HCI socket layer initialized
[ 11.706599] Linux video capture interface: v2.00
[ 11.999422] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.000193] usbcore: registered new interface driver btusb
[ 12.010814] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 12.016472] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input9

[ 12.016698] usbcore: registered new interface driver uvcvideo
[ 12.016784] USB Video Class driver (v0.1.0)
[ 12.047965] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22

[ 12.048087] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.234534] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 13.534232] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1
across:2650684k

[ 13.761980] EXT3 FS on sda1, internal journal
[ 14.325239] fuse init (API version 7.13)
[ 17.091883] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 17.141714] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.799124] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 18.799132] tg3: eth0: Flow control is on for TX and on for RX.
[ 18.799516] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.182573] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 19.182589] platform microcode: firmware: requesting intel-ucode/06-1c-02
[ 19.228346] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 19.228358] platform microcode: firmware: requesting intel-ucode/06-1c-02
[ 19.234923] Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba

[ 19.552009] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 19.564662] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 20.109701] apm: BIOS not found.
[ 28.884067] eth0: no IPv6 routers present
[ 35.757716] Bluetooth: L2CAP ver 2.14
[ 35.757724] Bluetooth: L2CAP socket layer initialized
[ 35.817352] Bluetooth: RFCOMM TTY layer initialized
[ 35.817365] Bluetooth: RFCOMM socket layer initialized
[ 35.817371] Bluetooth: RFCOMM ver 1.11
[ 35.942520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.942528] Bluetooth: BNEP filters: protocol multicast
[ 36.032172] Bridge firewalling registered
[ 36.392900] Bluetooth: SCO (Voice Link) ver 0.6
[ 36.392907] Bluetooth: SCO socket layer initialized
[ 37.474698] lp: driver loaded but no devices found
[ 37.515450] ppdev: user-space parallel port driver
[ 40.540070] eth1: no IPv6 routers present
[ 41.464047] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input11

[ 45.465816] [drm] Initialized drm 1.1.0 20060810
[ 45.590961] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 45.590972] i915 0000:00:02.0: setting latency timer to 64
[ 45.608731] [drm] set up 7M of stolen space
[ 46.233848] fb: conflicting fb hw usage inteldrmfb vs EFI VGA -
removing generic driver

[ 46.234029] fb1: inteldrmfb frame buffer device
[ 46.234035] registered panic notifier
[ 46.234052] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0

[ 46.340128] [drm] LVDS-8: set mode 1024x576 e
[ 77.268326] CPUFREQ: Per core ondemand sysfs interface is deprecated
- up_threshold

[ 77.581988] CPU0 attaching NULL sched-domain.
[ 77.582006] CPU1 attaching NULL sched-domain.
[ 77.612304] CPU0 attaching sched-domain:
[ 77.612319] domain 0: span 0-1 level SIBLING
[ 77.612332] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 77.612357] domain 1: span 0-1 level MC
[ 77.612367] groups: 0-1 (cpu_power = 1178)
[ 77.612387] CPU1 attaching sched-domain:
[ 77.612397] domain 0: span 0-1 level SIBLING
[ 77.612407] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 77.612429] domain 1: span 0-1 level MC
[ 77.612439] groups: 0-1 (cpu_power = 1178)
[ 87.820372] ACPI: EC: GPE storm detected, transactions will use
polling mode

[ 129.043378] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 1487.324561] hda-intel: IRQ timing workaround is activated for card
#0. Suggest a bigger bdl_pos_adj.

[ 5686.621063] CE: hpet increasing min_delta_ns to 15000 nsec
[ 6661.777314] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 6661.829793] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6663.484488] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 6663.484495] tg3: eth0: Flow control is on for TX and on for RX.
[ 6663.485200] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6674.344067] eth0: no IPv6 routers present
[ 7539.000074] ------------[ cut here ]------------
[ 7539.000105] WARNING: at
/tmp/buildd/linux-2.6-2.6.32/debian/build/source_i386_none/net/sched/sch_generic.c:261
dev_watchdog+0xbd/0x15d()

[ 7539.000118] Hardware name: 40682VG
[ 7539.000128] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out
[ 7539.000136] Modules linked in: i915 drm_kms_helper drm i2c_algo_bit
uinput ppdev lp parport sco bridge stp bnep rfcomm l2cap crc16
acpi_cpufreq cpufreq_powersave cpufreq_stats cpufreq_conservative
cpufreq_userspace microcode fuse snd_hda_codec_realtek snd_hda_intel
uvcvideo btusb snd_hda_codec snd_hwdep videodev bluetooth snd_pcm_oss
snd_mixer_oss v4l1_compat rfkill snd_pcm lib80211_crypt_tkip
snd_seq_midi snd_rawmidi snd_seq_midi_event joydev snd_seq wl(P)
snd_timer snd_seq_device i2c_i801 i2c_core lib80211 snd soundcore
snd_page_alloc pcspkr serio_raw psmouse evdev battery ac processor ext3
jbd mbcache usbhid hid sd_mod crc_t10dif usb_storage ide_gd_mod
ata_generic ide_pci_generic ata_piix uhci_hcd tg3 piix libata intel_agp
libphy ide_core ehci_hcd scsi_mod usbcore agpgart nls_base video output
button thermal fan thermal_sys [last unloaded: rng_core]
[ 7539.000396] Pid: 0, comm: swapper Tainted: P
2.6.32-trunk-686 #1

[ 7539.000405] Call Trace:
[ 7539.000426] [<c1030ba1>] ? warn_slowpath_common+0x5e/0x8a
[ 7539.000443] [<c11d778c>] ? dev_watchdog+0x0/0x15d
[ 7539.000458] [<c1030bff>] ? warn_slowpath_fmt+0x26/0x2a
[ 7539.000473] [<c11d7849>] ? dev_watchdog+0xbd/0x15d
[ 7539.000490] [<c102520b>] ? __wake_up+0x29/0x39
[ 7539.000506] [<c1041826>] ? insert_work+0x71/0x78
[ 7539.000521] [<c1041b9f>] ? delayed_work_timer_fn+0x0/0x28
[ 7539.000537] [<c103b360>] ? run_timer_softirq+0x16a/0x1eb
[ 7539.000566] [<c1035c80>] ? __do_softirq+0xaa/0x151
[ 7539.000581] [<c1035d58>] ? do_softirq+0x31/0x3c
[ 7539.000595] [<c1035e2e>] ? irq_exit+0x26/0x58
[ 7539.000610] [<c1004c91>] ? do_IRQ+0x78/0x89
[ 7539.000625] [<c10037f0>] ? common_interrupt+0x30/0x38
[ 7539.000667] [<f81410d7>] ? acpi_idle_enter_bm+0x246/0x281 [processor]
[ 7539.000686] [<c11b5421>] ? cpuidle_idle_call+0x68/0xbb
[ 7539.000700] [<c1002388>] ? cpu_idle+0x89/0xa5
[ 7539.000717] [<c1399800>] ? start_kernel+0x30c/0x311
[ 7539.000727] ---[ end trace 43b094347271e0ed ]---
[ 7539.000736] tg3: eth0: transmit timed out, resetting
[ 7539.000791] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[ 7539.000810] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[ 7539.139314] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[ 7539.278338] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[ 7539.416963] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[ 7539.557248] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[ 7539.567737] tg3: eth0: Link is down.
[ 7540.178165] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 7540.301302] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7541.821457] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 7541.821466] tg3: eth0: Flow control is on for TX and on for RX.
[ 7541.821996] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7552.428056] eth0: no IPv6 routers present
[ 7862.753301] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 7862.837760] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7864.460455] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 7864.460462] tg3: eth0: Flow control is on for TX and on for RX.
[ 7864.460859] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7875.228070] eth0: no IPv6 routers present
[ 8887.633350] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 8887.685783] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8889.340559] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 8889.340567] tg3: eth0: Flow control is on for TX and on for RX.
[ 8889.340972] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8899.928039] eth0: no IPv6 routers present
[ 9479.772308] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 9479.837684] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9481.479495] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 9481.479502] tg3: eth0: Flow control is on for TX and on for RX.
[ 9481.479985] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9492.012041] eth0: no IPv6 routers present
[10072.636287] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[10072.673607] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10074.364760] tg3: eth0: Link is up at 100 Mbps, full duplex.
[10074.364771] tg3: eth0: Flow control is on for TX and on for RX.
[10074.365329] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[10085.312059] eth0: no IPv6 routers present
[11128.684125] CE: hpet increasing min_delta_ns to 22500 nsec
[11290.657322] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[11290.713817] ADDRCONF(NETDEV_UP): eth0: link is not ready
[11292.407108] tg3: eth0: Link is up at 100 Mbps, full duplex.
[11292.407118] tg3: eth0: Flow control is on for TX and on for RX.
[11292.407666] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[11302.728074] eth0: no IPv6 routers present
[15083.000079] tg3: eth0: transmit timed out, resetting
[15083.000140] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[15083.000160] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[15083.139030] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[15083.278073] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[15083.417789] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[15083.428362] tg3: eth0: Link is down.
[15084.968502] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[15085.004921] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15086.654412] tg3: eth0: Link is up at 100 Mbps, full duplex.
[15086.654420] tg3: eth0: Flow control is on for TX and on for RX.
[15086.654800] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[15097.568077] eth0: no IPv6 routers present
[16237.024128] CE: hpet increasing min_delta_ns to 33750 nsec
[17187.000068] tg3: eth0: transmit timed out, resetting
[17187.000134] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[17187.000159] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[17187.138833] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[17187.277752] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[17187.416637] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[17187.427202] tg3: eth0: Link is down.
[17188.804330] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[17188.840412] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17190.830995] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17190.831004] tg3: eth0: Flow control is on for TX and on for RX.
[17190.831563] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[17201.292072] eth0: no IPv6 routers present
[23821.000077] tg3: eth0: transmit timed out, resetting
[23821.000139] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[23821.000159] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[23821.138736] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[23821.278020] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[23821.416629] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[23821.555159] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[23821.565781] tg3: eth0: Link is down.
[23822.612342] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[23822.647147] ADDRCONF(NETDEV_UP): eth0: link is not ready
[23824.340755] tg3: eth0: Link is up at 100 Mbps, full duplex.
[23824.340762] tg3: eth0: Flow control is on for TX and on for RX.
[23824.341179] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[23834.852084] eth0: no IPv6 routers present
[25355.000078] tg3: eth0: transmit timed out, resetting
[25355.000140] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[25355.000160] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[25355.138687] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[25355.277728] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[25355.416481] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[25355.556096] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[25355.566697] tg3: eth0: Link is down.
[25356.029307] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[25356.081973] ADDRCONF(NETDEV_UP): eth0: link is not ready
[25357.672632] tg3: eth0: Link is up at 100 Mbps, full duplex.
[25357.672641] tg3: eth0: Flow control is on for TX and on for RX.
[25357.673177] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[25368.064085] eth0: no IPv6 routers present
[25803.000093] tg3: eth0: transmit timed out, resetting
[25803.000154] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[25803.000174] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[25803.138610] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[25803.278203] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[25803.416529] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[25803.555101] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[25803.565593] tg3: eth0: Link is down.
[25803.997340] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[25804.046846] ADDRCONF(NETDEV_UP): eth0: link is not ready
[25805.640634] tg3: eth0: Link is up at 100 Mbps, full duplex.
[25805.640644] tg3: eth0: Flow control is on for TX and on for RX.
[25805.641194] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[25816.580065] eth0: no IPv6 routers present
[26356.000085] tg3: eth0: transmit timed out, resetting
[26356.000147] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[26356.000179] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[26356.138713] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[26356.277626] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[26356.416100] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[26356.554740] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[26356.565322] tg3: eth0: Link is down.
[26357.140333] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[26357.205755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[26358.783621] tg3: eth0: Link is up at 100 Mbps, full duplex.
[26358.783630] tg3: eth0: Flow control is on for TX and on for RX.
[26358.784325] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[26368.992081] eth0: no IPv6 routers present
[26894.000091] tg3: eth0: transmit timed out, resetting
[26894.000156] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[26894.000181] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[26894.138860] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[26894.278269] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[26894.416804] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[26894.555690] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[26894.566284] tg3: eth0: Link is down.
[26895.017311] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[26895.065740] ADDRCONF(NETDEV_UP): eth0: link is not ready
[26896.660560] tg3: eth0: Link is up at 100 Mbps, full duplex.
[26896.660569] tg3: eth0: Flow control is on for TX and on for RX.
[26896.661110] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[26907.240089] eth0: no IPv6 routers present
[27347.000081] tg3: eth0: transmit timed out, resetting
[27347.000153] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[27347.000174] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[27347.138855] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[27347.277864] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[27347.416264] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[27347.556279] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[27347.566805] tg3: eth0: Link is down.
[27348.032313] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[27348.068848] ADDRCONF(NETDEV_UP): eth0: link is not ready
[27349.675592] tg3: eth0: Link is up at 100 Mbps, full duplex.
[27349.675601] tg3: eth0: Flow control is on for TX and on for RX.
[27349.676660] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[27360.028058] eth0: no IPv6 routers present
[27805.000073] tg3: eth0: transmit timed out, resetting
[27805.000139] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[27805.000159] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[27805.139627] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[27805.278999] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[27805.417483] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[27805.555826] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[27805.566389] tg3: eth0: Link is down.
[27806.017342] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[27806.074480] ADDRCONF(NETDEV_UP): eth0: link is not ready
[27807.660521] tg3: eth0: Link is up at 100 Mbps, full duplex.
[27807.660530] tg3: eth0: Flow control is on for TX and on for RX.
[27807.660983] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[27818.312076] eth0: no IPv6 routers present
[29063.000078] tg3: eth0: transmit timed out, resetting
[29063.000140] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[29063.000159] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[29063.139281] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[29063.278193] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[29063.416772] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[29063.555385] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[29063.565831] tg3: eth0: Link is down.
[29064.249554] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[29064.300143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[29065.935487] tg3: eth0: Link is up at 100 Mbps, full duplex.
[29065.935494] tg3: eth0: Flow control is on for TX and on for RX.
[29065.935868] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[29075.944075] eth0: no IPv6 routers present
[29701.000075] tg3: eth0: transmit timed out, resetting
[29701.000137] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[29701.000156] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[29701.138591] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[29701.278057] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[29701.416687] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[29701.427225] tg3: eth0: Link is down.
[29702.013304] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[29702.070491] ADDRCONF(NETDEV_UP): eth0: link is not ready
[29703.656592] tg3: eth0: Link is up at 100 Mbps, full duplex.
[29703.656602] tg3: eth0: Flow control is on for TX and on for RX.
[29703.657135] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[29713.744052] eth0: no IPv6 routers present
[30474.000069] tg3: eth0: transmit timed out, resetting
[30474.000130] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[30474.000150] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[30474.138582] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[30474.278248] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[30474.416894] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
[30474.557386] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[30474.567886] tg3: eth0: Link is down.
[30475.056317] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[30475.091640] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30476.699608] tg3: eth0: Link is up at 100 Mbps, full duplex.
[30476.699618] tg3: eth0: Flow control is on for TX and on for RX.
[30476.700137] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30487.244071] eth0: no IPv6 routers present
[30952.000088] tg3: eth0: transmit timed out, resetting
[30952.000152] tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000000]
[30952.000175] tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
[30952.139437] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
[30952.278831] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
[30952.417620] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
[30952.428093] tg3: eth0: Link is down.
[30952.869328] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[30952.930434] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30954.512657] tg3: eth0: Link is up at 100 Mbps, full duplex.
[30954.512666] tg3: eth0: Flow control is on for TX and on for RX.
[30954.513200] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30964.756065] eth0: no IPv6 routers present



--
Bye,
Goran Dobosevic
Hrvatski: www.dobosevic.com
English: www.dobosevic.com/en/


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-29-2010, 02:50 AM
Celejar
 
Default My Sid box is lost Module p80211

On Fri, 29 Jan 2010 02:56:19 +0100
"goran@dobosevic.com" <goran@dobosevic.com> wrote:

> Celejar wrote:
> > On Thu, 28 Jan 2010 05:29:07 +0100
> > godo <goran@dobosevic.com> wrote:

[newly non-working wireless]

> > Well, nothing else is going to work if the appropriate module isn't
> > being loaded. Let's start from the beginning: what HW do you have
> > (relevant output of lspci / dmesg)?
> >
> > Celejar
>
> Hi,
> here it is:
>
> $lspci -nn | grep Broadcom
> 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink
> BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)

This is the wired interface.

> 05:00.0 Network controller [0280]: Broadcom Corporation BCM4312
> 802.11b/g [14e4:4315] (rev 01)

This is your wireless card.

> $dmesg

...

> [ 10.355077] wl: module license 'MIXED/Proprietary' taints kernel.
> [ 10.355086] Disabling lock debugging due to kernel taint
> [ 10.365258] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 10.365280] wl 0000:05:00.0: setting latency timer to 64
> [ 10.755648] lib80211_crypt: registered algorithm 'TKIP'
> [ 10.756319] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9

This looks like you're using the proprietary Broadcom driver, not the
FLOSS b43. I don't know anything about this driver - perhaps someone
else can help.

Celejar
--
foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solver and Generator


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-29-2010, 05:28 AM
godo
 
Default My Sid box is lost Module p80211

This looks like you're using the proprietary Broadcom driver, not the
FLOSS b43. I don't know anything about this driver - perhaps someone
else can help.

Celejar


Thanks in any case.
--
Bye,
Goran Dobosevic
Hrvatski: www.dobosevic.com
English: www.dobosevic.com/en/
Registered Linux User #503414


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 01:24 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org