FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 01-16-2010, 11:38 PM
Marco Vaschetto
 
Default problem whit optic fibre adapter (emulex LP952)

Hello,

I got a problem whit Debian Lenny and a emulex the model is LP952

I search alot about this problem, but, until now, I didn't fix, I have
load a kernel modules right "lpfc" and when I run on the bash the command
"lspci -vv" the respond is "kernel modules: lpfc" but nothing kernel
driver (it is right?)

on the bootstrap the error I receive is this:"
Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0
Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0"


I try to make communication the Debian Server whit a MSA1500 CS for make
a storage controller and iSCSI server but now I'm stop for this problem
tank's to every one can help me.


Marco Vaschetto.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-17-2010, 07:45 PM
Stan Hoeppner
 
Default problem whit optic fibre adapter (emulex LP952)

Marco Vaschetto put forth on 1/16/2010 6:38 PM:

> Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
> failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0
> Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
> failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0"

This could be caused by any number of things. Send complete lspci (no switches)
output and we'll go from there.

--
Stan


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-19-2010, 07:35 AM
Marco Vaschetto
 
Default problem whit optic fibre adapter (emulex LP952)

Stan Hoeppner ha scritto:

Marco Vaschetto put forth on 1/16/2010 6:38 PM:



Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0
Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0"



This could be caused by any number of things. Send complete lspci (no switches)
output and we'll go from there.



Hi,

this is the complite output of lspci -vv

00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Kernel modules: sworks-agp

00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Kernel modules: sworks-agp

00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA controller])

Subsystem: Compaq Computer Corporation Proliant Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at f5ff0000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 98040000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X
Gigabit Ethernet (rev 02)
Subsystem: Compaq Computer Corporation NC7760 Gigabit Server
Adapter (PCI-X, 10/100/1000-T)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f5fe0000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 98060000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-

Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
Queue=0/3 Enable-

Address: 084280808000409c Data: 14a6
Kernel driver in use: tg3
Kernel modules: tg3

00:05.0 System peripheral: Compaq Computer Corporation Advanced System
Management Controller

Subsystem: Compaq Computer Corporation Device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=256]

00:06.0 RAID bus controller: Compaq Computer Corporation Smart Array
64xx (rev 01)

Subsystem: Compaq Computer Corporation Smart Array 641
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f5fc0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 2800 [size=256]
Region 3: Memory at f5f80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 98000000 [disabled] [size=256K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [dc] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=2048 OST=8
Status: Dev=fd:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=128 RSCEM- 266MHz- 533MHz-

Capabilities: [f0] Vital Product Data <?>
Kernel driver in use: cciss
Kernel modules: cciss

00:07.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f7800000-f7bfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel modules: shpchp

00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f7c00000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel modules: shpchp

00:09.0 Fibre Channel: Emulex Corporation LP952 Fibre Channel Host
Adapter (rev 01)

Subsystem: Emulex Corporation LP952 Fibre Channel Host Adapter
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin A routed to IRQ 27
Region 0: Memory at f5f70000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at f5f60000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2c00 [size=256]
Kernel modules: lpfc

00:0e.0 IDE interface: Broadcom CSB6 IDE Controller (rev a0) (prog-if 82
[Master PriP])

Subsystem: Broadcom Device 0213
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64
Interrupt: pin ? routed to IRQ 14
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 2000 [size=16]
Capabilities: [b0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks

00:0f.0 ISA bridge: Broadcom CSB6 South Bridge (rev a0)
Subsystem: Broadcom Device 0201
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-

Latency: 32
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:0f.2 USB Controller: Broadcom CSB6 OHCI USB Controller (rev 05)
(prog-if 10 [OHCI])

Subsystem: Broadcom Device 0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f5f50000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0f.3 Host bridge: Broadcom GCLE-2 Host Bridge
Subsystem: Broadcom Device 0230
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
Kernel modules: sworks-agp

01:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 08)
Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC
(dual port)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7bf0000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Region 2: Memory at f7a00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: eepro100, e100

01:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 08)
Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC
(dual port)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f79f0000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3040 [size=64]
Region 2: Memory at f7800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: eepro100, e100

02:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 08)
Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC
(dual port)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 4000 [size=64]
Region 2: Memory at f7e00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: eepro100, e100

02:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 08)
Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC
(dual port)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7df0000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 4040 [size=64]
Region 2: Memory at f7c00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: eepro100, e100

tank's.

Marco Vaschetto


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-19-2010, 09:45 PM
Stan Hoeppner
 
Default problem whit optic fibre adapter (emulex LP952)

Can we get some relevant dmesg and /var/log/boot output? Also, are you loading
libfc? You'll need it in addition to lpfc.

Have you tried building a custom kernel with all the stuff built in, not as modules?

--
Stan


Marco Vaschetto put forth on 1/19/2010 2:35 AM:
> Stan Hoeppner ha scritto:
>> Marco Vaschetto put forth on 1/16/2010 6:38 PM:
>>
>>
>>> Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
>>> failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0
>>> Jan 14 14:10:28 ssdsmb1tls kernel: lpfc 0000:03:01.0: 0:0442 Adapter
>>> failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0"
>>>
>>
>> This could be caused by any number of things. Send complete lspci (no
>> switches)
>> output and we'll go from there.
>>
>>
> Hi,
>
> this is the complite output of lspci -vv
>
> 00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel modules: sworks-agp
>
> 00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel modules: sworks-agp
>
> 00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> (prog-if 00 [VGA controller])
> Subsystem: Compaq Computer Corporation Proliant Rage XL
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min), Cache Line Size: 64 bytes
> Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: I/O ports at 2400 [size=256]
> Region 2: Memory at f5ff0000 (32-bit, non-prefetchable) [size=4K]
> [virtual] Expansion ROM at 98040000 [disabled] [size=128K]
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X
> Gigabit Ethernet (rev 02)
> Subsystem: Compaq Computer Corporation NC7760 Gigabit Server
> Adapter (PCI-X, 10/100/1000-T)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at f5fe0000 (64-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at 98060000 [disabled] [size=64K]
> Capabilities: [40] PCI-X non-bridge device
> Command: DPERE- ERO- RBC=512 OST=1
> Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data <?>
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/3 Enable-
> Address: 084280808000409c Data: 14a6
> Kernel driver in use: tg3
> Kernel modules: tg3
>
> 00:05.0 System peripheral: Compaq Computer Corporation Advanced System
> Management Controller
> Subsystem: Compaq Computer Corporation Device b0f3
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 1800 [size=256]
> Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=256]
>
> 00:06.0 RAID bus controller: Compaq Computer Corporation Smart Array
> 64xx (rev 01)
> Subsystem: Compaq Computer Corporation Smart Array 641
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at f5fc0000 (64-bit, non-prefetchable) [size=8K]
> Region 2: I/O ports at 2800 [size=256]
> Region 3: Memory at f5f80000 (64-bit, non-prefetchable) [size=256K]
> [virtual] Expansion ROM at 98000000 [disabled] [size=256K]
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [dc] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=2048 OST=8
> Status: Dev=fd:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=8 DMCRS=128 RSCEM- 266MHz- 533MHz-
> Capabilities: [f0] Vital Product Data <?>
> Kernel driver in use: cciss
> Kernel modules: cciss
>
> 00:07.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: f7800000-f7bfffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Kernel modules: shpchp
>
> 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: f7c00000-f7ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Kernel modules: shpchp
>
> 00:09.0 Fibre Channel: Emulex Corporation LP952 Fibre Channel Host
> Adapter (rev 01)
> Subsystem: Emulex Corporation LP952 Fibre Channel Host Adapter
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 27
> Region 0: Memory at f5f70000 (64-bit, non-prefetchable) [size=4K]
> Region 2: Memory at f5f60000 (64-bit, non-prefetchable) [size=256]
> Region 4: I/O ports at 2c00 [size=256]
> Kernel modules: lpfc
>
> 00:0e.0 IDE interface: Broadcom CSB6 IDE Controller (rev a0) (prog-if 82
> [Master PriP])
> Subsystem: Broadcom Device 0213
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin ? routed to IRQ 14
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 2000 [size=16]
> Capabilities: [b0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: Serverworks_IDE
> Kernel modules: serverworks
>
> 00:0f.0 ISA bridge: Broadcom CSB6 South Bridge (rev a0)
> Subsystem: Broadcom Device 0201
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 32
> Kernel driver in use: piix4_smbus
> Kernel modules: i2c-piix4
>
> 00:0f.2 USB Controller: Broadcom CSB6 OHCI USB Controller (rev 05)
> (prog-if 10 [OHCI])
> Subsystem: Broadcom Device 0220
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (20000ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at f5f50000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:0f.3 Host bridge: Broadcom GCLE-2 Host Bridge
> Subsystem: Broadcom Device 0230
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Kernel modules: sworks-agp
>
> 01:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
> Pro 100 (rev 08)
> Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC (dual
> port)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at f7bf0000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3000 [size=64]
> Region 2: Memory at f7a00000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: eepro100, e100
>
> 01:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
> Pro 100 (rev 08)
> Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC (dual
> port)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 24
> Region 0: Memory at f79f0000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3040 [size=64]
> Region 2: Memory at f7800000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: eepro100, e100
>
> 02:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
> Pro 100 (rev 08)
> Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC (dual
> port)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 25
> Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 4000 [size=64]
> Region 2: Memory at f7e00000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: eepro100, e100
>
> 02:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
> Pro 100 (rev 08)
> Subsystem: Compaq Computer Corporation NC3134 Fast Ethernet NIC (dual
> port)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 26
> Region 0: Memory at f7df0000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 4040 [size=64]
> Region 2: Memory at f7c00000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: eepro100, e100
>
> tank's.
>
> Marco Vaschetto
>
>


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-20-2010, 07:36 AM
Marco Vaschetto
 
Default problem whit optic fibre adapter (emulex LP952)

Stan Hoeppner ha scritto:

Can we get some relevant dmesg and /var/log/boot output? Also, are you loading
libfc? You'll need it in addition to lpfc.

Have you tried building a custom kernel with all the stuff built in, not as modules?


No, in fact I didn't try whit a compiled kernel but only precompiled
kernel,


the version I have try is 2.6.26-2-686 and 2.6.32-trunk-686, but steal
now is not work


now I will give you the output of a "clean" based system of Debian
Lenny kernel 2.6.26-2-686 and to day I will try your suggestion


of use a recompiled kernel; and no, is without the libfc. I will try to
fix that.


so this is the output on the bootstrap:

the file log of boot is empty

LSAXYZAEYY:~# cat /var/log/boot
(Nothing has been logged yet.)


this is the output of dmesg (complete)of a new installation:

LSAXYZAEYY:/# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009

[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000008fffa000 (usable)
[ 0.000000] BIOS-e820: 000000008fffa000 - 0000000090000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] 1407MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f4fd0] 000f4fd0
[ 0.000000] Entering add_active_range(0, 0, 589818) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 589818
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 589818
[ 0.000000] On node 0 totalpages: 589818
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2816 pages used for memmap
[ 0.000000] HighMem zone: 357626 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ)
[ 0.000000] ACPI: RSDT 8FFFA000, 0030 (r1 COMPAQ D15
2  162E)
[ 0.000000] ACPI: FACP 8FFFA040, 0074 (r1 COMPAQ D15
2  162E)
[ 0.000000] ACPI: DSDT 8FFFA240, 22F1 (r1 COMPAQ DSDT 1
MSFT 100000B)

[ 0.000000] ACPI: FACS 8FFFA0C0, 0040
[ 0.000000] ACPI: APIC 8FFFA100, 00AC (r1 COMPAQ 00000083
2  162E)
[ 0.000000] ACPI: SPCR 8FFFA1C0, 0050 (r1 COMPAQ SPCRRBSU
1  162E)

[ 0.000000] ACPI: PM-Timer IO Port: 0x920
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
0-15

[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI
16-31

[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI
32-47

[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
[ 0.000000] IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI
48-63

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 4 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 98000000 (gap:
90000000:6ec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000

[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 585210
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=/dev/cciss/c0d0p1 ro

[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec01000)
[ 0.000000] mapped IOAPIC to ffff8000 (fec02000)
[ 0.000000] mapped IOAPIC to ffff7000 (fec03000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3065.986 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 2333484k/2359272k available (1770k kernel code,
24676k reserved, 750k data, 244k init, 1441768k highmem)

[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02baaa1 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02baaa1 (1770 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.

[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084008] Calibrating delay using timer specific routine.. 6137.22
BogoMIPS (lpj=12274457)

[ 0.084159] Security Framework initialized
[ 0.084223] SELinux: Disabled at boot.
[ 0.084280] Capability LSM initialized
[ 0.084353] Mount-cache hash table entries: 512
[ 0.084640] Initializing cgroup subsys ns
[ 0.084699] Initializing cgroup subsys cpuacct
[ 0.084754] Initializing cgroup subsys devices
[ 0.084833] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.084923] CPU: L2 cache: 512K
[ 0.084976] CPU: Physical Processor ID: 0
[ 0.085033] Intel machine check architecture supported.
[ 0.085091] Intel machine check reporting enabled on CPU#0.
[ 0.085146] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.085205] CPU0: Thermal monitoring enabled
[ 0.085276] Checking 'hlt' instruction... OK.
[ 0.101415] ACPI: Core revision 20080321
[ 0.112007] ENABLING IO-APIC IRQs
[ 0.112007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.151663] CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
[ 0.152009] Booting processor 1/1 ip 6000
[ 0.160010] Initializing CPU#1
[ 0.160010] Calibrating delay using timer specific routine.. 6131.91
BogoMIPS (lpj=12263831)

[ 0.160010] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.160010] CPU: L2 cache: 512K
[ 0.160010] CPU: Physical Processor ID: 0
[ 0.160010] Intel machine check architecture supported.
[ 0.160010] Intel machine check reporting enabled on CPU#1.
[ 0.160010] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.160010] CPU1: Thermal monitoring enabled
[ 0.239895] CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
[ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.244015] Brought up 2 CPUs
[ 0.244015] Total of 2 processors activated (12269.14 BogoMIPS).
[ 0.244015] CPU0 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 0 1
[ 0.244015] domain 1: span 0-1
[ 0.244015] groups: 0-1
[ 0.244015] CPU1 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 1 0
[ 0.244015] domain 1: span 0-1
[ 0.244015] groups: 0-1
[ 0.244015] net_namespace: 660 bytes
[ 0.244015] Booting paravirtualized kernel on bare hardware
[ 0.244015] NET: Registered protocol family 16
[ 0.244015] ACPI: bus type pci registered
[ 0.256016] PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=2
[ 0.256016] PCI: Using configuration type 1 for base access
[ 0.256016] Setting up standard PCI resources
[ 0.264016] ACPI: EC: Look up EC in DSDT
[ 0.267115] ACPI: Interpreter enabled
[ 0.267175] ACPI: (supports S0 S4 S5)
[ 0.267343] ACPI: Using IOAPIC for interrupt routing
[ 0.272017] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276017] ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 10 11 15) *3
[ 0.276017] ACPI: PCI Interrupt Link [RAID] (IRQs 11) *0, disabled.
[ 0.276017] ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 *11 15)
[ 0.276017] ACPI: PCI Interrupt Link [IN19] (IRQs *4 5 7 10 11 15)
[ 0.276017] ACPI: PCI Interrupt Link [IN21] (IRQs 4 *5 7 10 11 15)
[ 0.276017] ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0,
disabled.

[ 0.276017] ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 *11 15)
[ 0.276487] ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 *7 10 11 15)
[ 0.276951] ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 *10 11 15)
[ 0.277419] ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 *11 15)
[ 0.280017] ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 *10 11 15)
[ 0.280481] ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0,
disabled.

[ 0.282147] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.282147] pnp: PnP ACPI init
[ 0.282147] ACPI: bus type pnp registered
[ 0.286148] pnp: PnP ACPI: found 10 devices
[ 0.286148] ACPI: ACPI bus type pnp unregistered
[ 0.286148] PnPBIOS: Disabled by ACPI PNP
[ 0.286148] PCI: Using ACPI for IRQ routing
[ 0.295447] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.295507] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.295564] system 00:01: ioport range 0x900-0x903 has been reserved
[ 0.295622] system 00:01: ioport range 0x904-0x904 has been reserved
[ 0.295680] system 00:01: ioport range 0x910-0x911 has been reserved
[ 0.295738] system 00:01: ioport range 0x920-0x923 has been reserved
[ 0.295796] system 00:01: ioport range 0x930-0x937 has been reserved
[ 0.295853] system 00:01: ioport range 0x940-0x947 has been reserved
[ 0.295911] system 00:01: ioport range 0x950-0x957 has been reserved
[ 0.295969] system 00:01: ioport range 0xc06-0xc08 has been reserved
[ 0.296027] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.296085] system 00:01: ioport range 0xc49-0xc4a has been reserved
[ 0.296142] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.296199] system 00:01: ioport range 0xc6c-0xc6f has been reserved
[ 0.296258] system 00:01: ioport range 0x230-0x233 has been reserved
[ 0.296315] system 00:01: ioport range 0x260-0x267 has been reserved
[ 0.296373] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.296431] system 00:01: ioport range 0x700-0x713 has been reserved
[ 0.296487] system 00:01: ioport range 0x800-0x81f has been reserved
[ 0.296545] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.298424] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.298482] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.298542] system 00:01: ioport range 0x1900-0x1903 has been reserved
[ 0.329947] PCI: Bridge: 0000:00:07.0
[ 0.330004] IO window: 3000-3fff
[ 0.330061] MEM window: 0xf7800000-0xf7bfffff
[ 0.330117] PREFETCH window: disabled.
[ 0.330174] PCI: Bridge: 0000:00:08.0
[ 0.330227] IO window: 4000-4fff
[ 0.330283] MEM window: 0xf7c00000-0xf7ffffff
[ 0.330339] PREFETCH window: disabled.
[ 0.330459] NET: Registered protocol family 2
[ 0.341936] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.342413] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)

[ 0.344098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.344306] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.344306] TCP reno registered
[ 0.349538] NET: Registered protocol family 1
[ 0.349763] checking if image is initramfs... it is
[ 0.487730] Freeing initrd memory: 1838k freed
[ 0.489138] platform rtc_cmos: registered platform RTC device (no PNP
device found)

[ 0.493115] audit: initializing netlink socket (disabled)
[ 0.493115] type=2000 audit(1263974814.484:1): initialized
[ 0.493115] highmem bounce pool size: 64 pages
[ 0.493115] Total HugeTLB memory allocated, 0
[ 0.493115] VFS: Disk quotas dquot_6.5.1
[ 0.493115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.493115] msgmni has been set to 1746
[ 0.493115] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)

[ 0.493115] io scheduler noop registered
[ 0.493115] io scheduler anticipatory registered
[ 0.493115] io scheduler deadline registered
[ 0.493115] io scheduler cfq registered (default)
[ 0.493115] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.493115] pci 0000:00:00.1: MSI quirk detected; MSI disabled
[ 0.493115] pci 0000:00:03.0: Boot video device
[ 0.507092] pci 0000:01:04.0: Firmware left e100 interrupts enabled;
disabling
[ 0.507177] pci 0000:01:05.0: Firmware left e100 interrupts enabled;
disabling
[ 0.507262] pci 0000:02:04.0: Firmware left e100 interrupts enabled;
disabling
[ 0.507346] pci 0000:02:05.0: Firmware left e100 interrupts enabled;
disabling

[ 0.509114] isapnp: Scanning for PnP cards...
[ 0.818524] isapnp: No Plug & Play device found
[ 0.821109] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled

[ 0.821109] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.821109] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.825106] brd: module loaded
[ 0.825106] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at
0x60,0x64 irq 1,12

[ 0.826135] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.826197] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.828749] mice: PS/2 mouse device common for all mice
[ 0.828749] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.828749] rtc0: alarms up to one day
[ 0.831691] Switched to high resolution mode on CPU 1
[ 0.832804] Switched to high resolution mode on CPU 0
[ 0.844745] input: AT Translated Set 2 keyboard as /class/input/input0
[ 0.844745] cpuidle: using governor ladder
[ 0.844745] cpuidle: using governor menu
[ 0.844745] No iBFT detected.
[ 0.844745] TCP cubic registered
[ 0.844745] NET: Registered protocol family 17
[ 0.844745] Using IPI No-Shortcut mode
[ 0.844745] registered taskstats version 1
[ 0.844745] rtc_cmos rtc_cmos: setting system clock to 2010-01-20
08:06:55 UTC (1263974815)

[ 0.844745] Freeing unused kernel memory: 244k freed
[ 0.912745] SCSI subsystem initialized
[ 0.916762] HP CISS Driver (v 3.6.20)
[ 0.916762] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 21 (level,
low) -> IRQ 21

[ 0.958551] cciss0: <0x46> at PCI 0000:00:06.0 IRQ 21 using DAC
[ 0.969814] blocks= 71119755 block_size= 512
[ 0.973801] heads=255, sectors=63, cylinders=4427
[ 0.973803]
[ 0.975277] blocks= 71119755 block_size= 512
[ 0.975277] heads=255, sectors=63, cylinders=4427
[ 0.975277]
[ 0.975277] cciss/c0d0: p1 p2 < p5 >
[ 1.003291] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.003291] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.007286] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.007286] ACPI: Thermal Zone [THM0] (8 C)
[ 1.371292] PM: Starting manual resume from disk
[ 1.402844] kjournald starting. Commit interval 5 seconds
[ 1.402844] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.517164] udevd version 125 started
[ 3.429486] Linux agpgart interface v0.103
[ 3.461501] tg3.c:v3.92.1 (June 9, 2008)
[ 3.461591] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level,
low) -> IRQ 19
[ 3.504207] eth0: Tigon3 [partno(N/A) rev 1002 PHY(5703)]
(PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:85:69:7b:9a
[ 3.504315] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
WireSpeed[1] TSOcap[1]

[ 3.504411] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 3.516651] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.526127] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.605524] No dock devices found.
[ 3.654713] Emulex LightPulse Fibre Channel SCSI driver 8.2.6
[ 3.654781] Copyright(c) 2004-2008 Emulex. All rights reserved.
[ 3.654902] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 27 (level,
low) -> IRQ 27

[ 3.696556] scsi0 : on PCI bus 00 device 48 irq 27
[ 5.722476] libata version 3.00 loaded.
[ 5.736537] input: PC Speaker as /class/input/input1
[ 5.814374] usbcore: registered new interface driver usbfs
[ 5.814485] usbcore: registered new interface driver hub
[ 5.857757] usbcore: registered new device driver usb
[ 5.862214] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver

[ 5.908648] input: Power Button (FF) as /class/input/input2
[ 5.954659] ACPI: Power Button (FF) [PWRF]
[ 6.369720] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 6.477188] Floppy drive(s): fd0 is 1.44M
[ 6.494944] FDC 0 is a National Semiconductor PC87306
[ 6.589343] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 6.589415] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.609750] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.774218] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.774218] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 13.751240] lpfc 0000:00:09.0: 0:0442 Adapter failed to init, mbxCmd
x88 CONFIG_PORT, mbxStatus x12 Data: x0
[ 18.555926] lpfc 0000:00:09.0: 0:0442 Adapter failed to init, mbxCmd
x88 CONFIG_PORT, mbxStatus x12 Data: x0

[ 18.559835] ACPI: PCI interrupt for device 0000:00:09.0 disabled
[ 18.559835] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 18.924658] ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 10
[ 18.924754] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [IUSB] -> GSI
10 (level, low) -> IRQ 10

[ 18.924962] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 18.925500] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned
bus number 1

[ 18.925603] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xf5f50000
[ 18.981950] usb usb1: configuration #1 chosen from 1 choice
[ 18.982048] hub 1-0:1.0: USB hub found
[ 18.982115] hub 1-0:1.0: 4 ports detected
[ 19.093719] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.093719] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[ 19.093722] usb usb1: Product: OHCI Host Controller
[ 19.093776] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 19.093831] usb usb1: SerialNumber: 0000:00:0f.2
[ 19.101835] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 23 (level,
low) -> IRQ 23
[ 19.201851] e100: eth1: e100_probe: addr 0xf7bf0000, irq 23, MAC addr
00:02:a5:8e:ce:a6
[ 19.201851] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 24 (level,
low) -> IRQ 24
[ 19.297833] e100: eth2: e100_probe: addr 0xf79f0000, irq 24, MAC addr
00:02:a5:8e:ce:a7
[ 19.297866] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 25 (level,
low) -> IRQ 25
[ 19.397831] e100: eth3: e100_probe: addr 0xf7ff0000, irq 25, MAC addr
00:02:a5:89:86:92
[ 19.397831] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 26 (level,
low) -> IRQ 26
[ 19.497848] e100: eth4: e100_probe: addr 0xf7df0000, irq 26, MAC addr
00:02:a5:89:86:93

[ 19.497848] Uniform Multi-Platform E-IDE driver
[ 19.497934] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 19.507840] SvrWks CSB6: IDE controller (0x1166:0x0217 rev 0xa0) at
PCI slot 0000:00:0e.0

[ 19.507840] SvrWks CSB6: not 100% native mode: will probe irqs later
[ 19.507840] ide2: BM-DMA at 0x2000-0x2007
[ 19.507840] Probing IDE interface ide2...
[ 20.762833] hdf: LITE-ON DVD SOHD-16P9S, ATAPI CD/DVD-ROM drive
[ 21.150606] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 21.150690] hdf: UDMA/44 mode selected
[ 21.150881] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.234227] hdf: ATAPI 48X DVD-ROM drive, 254kB Cache
[ 21.234227] Uniform CD-ROM driver Revision: 3.20
[ 21.875344] Adding 1510068k swap on /dev/cciss/c0d0p5. Priority:-1
extents:1 across:1510068k

[ 22.220130] EXT3 FS on cciss/c0d0p1, internal journal
[ 22.690017] loop: module loaded
[ 24.737362] NET: Registered protocol family 10
[ 24.738441] lo: Disabled Privacy Extensions
[ 24.738660] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.942663] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 24.942663] tg3: eth0: Flow control is on for TX and on for RX.
[ 24.942924] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.889054] eth0: no IPv6 routers present


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-20-2010, 09:26 AM
Stan Hoeppner
 
Default problem whit optic fibre adapter (emulex LP952)

This may point you in the right direction:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1263982812391+28 353475&threadId=760337

Looks like you might need to update the card's firmware, try it in another PCI-X
slot, or remove all the other PCI/X cards to see if there is a conflict. I
don't have any direct experience with FC cards and Linux, only VMware ESX. I
have seen situations where drivers fail when the card is not attached to a
switch. Way back in the day I've seen SCSI drivers fail during boot if there
were no drives attached. Goofy stuff.

I'm betting you're in a similar goofy situation. That card and driver combo
appear to be finicky.

--
Stan


Marco Vaschetto put forth on 1/20/2010 2:36 AM:
> Stan Hoeppner ha scritto:
>> Can we get some relevant dmesg and /var/log/boot output? Also, are
>> you loading
>> libfc? You'll need it in addition to lpfc.
>>
>> Have you tried building a custom kernel with all the stuff built in,
>> not as modules?
>>
>>
> No, in fact I didn't try whit a compiled kernel but only precompiled
> kernel,
>
> the version I have try is 2.6.26-2-686 and 2.6.32-trunk-686, but steal
> now is not work
>
> now I will give you the output of a "clean" based system of Debian
> Lenny kernel 2.6.26-2-686 and to day I will try your suggestion
>
> of use a recompiled kernel; and no, is without the libfc. I will try to
> fix that.
>
> so this is the output on the bootstrap:
>
> the file log of boot is empty
>
> LSAXYZAEYY:~# cat /var/log/boot (Nothing has been logged yet.)
>
> this is the output of dmesg (complete)of a new installation:
>
> LSAXYZAEYY:/# dmesg
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2)
> (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
> 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000008fffa000 (usable)
> [ 0.000000] BIOS-e820: 000000008fffa000 - 0000000090000000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> [ 0.000000] 1407MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] found SMP MP-table at [c00f4fd0] 000f4fd0
> [ 0.000000] Entering add_active_range(0, 0, 589818) 0 entries of 256
> used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 589818
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 589818
> [ 0.000000] On node 0 totalpages: 589818
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 2816 pages used for memmap
> [ 0.000000] HighMem zone: 357626 pages, LIFO batch:31
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ)
> [ 0.000000] ACPI: RSDT 8FFFA000, 0030 (r1 COMPAQ D15
> 2  162E)
> [ 0.000000] ACPI: FACP 8FFFA040, 0074 (r1 COMPAQ D15
> 2  162E)
> [ 0.000000] ACPI: DSDT 8FFFA240, 22F1 (r1 COMPAQ DSDT 1
> MSFT 100000B)
> [ 0.000000] ACPI: FACS 8FFFA0C0, 0040
> [ 0.000000] ACPI: APIC 8FFFA100, 00AC (r1 COMPAQ 00000083
> 2  162E)
> [ 0.000000] ACPI: SPCR 8FFFA1C0, 0050 (r1 COMPAQ SPCRRBSU
> 1  162E)
> [ 0.000000] ACPI: PM-Timer IO Port: 0x920
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
> 0-15
> [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
> [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI
> 16-31
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
> [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI
> 32-47
> [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
> [ 0.000000] IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI
> 48-63
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 4 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 98000000 (gap:
> 90000000:6ec00000)
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
> [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 585210
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=/dev/cciss/c0d0p1 ro
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] mapped IOAPIC to ffff9000 (fec01000)
> [ 0.000000] mapped IOAPIC to ffff8000 (fec02000)
> [ 0.000000] mapped IOAPIC to ffff7000 (fec03000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Detected 3065.986 MHz processor.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 0.004000] Memory: 2333484k/2359272k available (1770k kernel code,
> 24676k reserved, 750k data, 244k init, 1441768k highmem)
> [ 0.004000] virtual kernel memory layout:
> [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
> [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
> [ 0.004000] .data : 0xc02baaa1 - 0xc0376620 ( 750 kB)
> [ 0.004000] .text : 0xc0100000 - 0xc02baaa1 (1770 kB)
> [ 0.004000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.084008] Calibrating delay using timer specific routine.. 6137.22
> BogoMIPS (lpj=12274457)
> [ 0.084159] Security Framework initialized
> [ 0.084223] SELinux: Disabled at boot.
> [ 0.084280] Capability LSM initialized
> [ 0.084353] Mount-cache hash table entries: 512
> [ 0.084640] Initializing cgroup subsys ns
> [ 0.084699] Initializing cgroup subsys cpuacct
> [ 0.084754] Initializing cgroup subsys devices
> [ 0.084833] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [ 0.084923] CPU: L2 cache: 512K
> [ 0.084976] CPU: Physical Processor ID: 0
> [ 0.085033] Intel machine check architecture supported.
> [ 0.085091] Intel machine check reporting enabled on CPU#0.
> [ 0.085146] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> [ 0.085205] CPU0: Thermal monitoring enabled
> [ 0.085276] Checking 'hlt' instruction... OK.
> [ 0.101415] ACPI: Core revision 20080321
> [ 0.112007] ENABLING IO-APIC IRQs
> [ 0.112007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.151663] CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
> [ 0.152009] Booting processor 1/1 ip 6000
> [ 0.160010] Initializing CPU#1
> [ 0.160010] Calibrating delay using timer specific routine.. 6131.91
> BogoMIPS (lpj=12263831)
> [ 0.160010] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [ 0.160010] CPU: L2 cache: 512K
> [ 0.160010] CPU: Physical Processor ID: 0
> [ 0.160010] Intel machine check architecture supported.
> [ 0.160010] Intel machine check reporting enabled on CPU#1.
> [ 0.160010] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
> [ 0.160010] CPU1: Thermal monitoring enabled
> [ 0.239895] CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
> [ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.244015] Brought up 2 CPUs
> [ 0.244015] Total of 2 processors activated (12269.14 BogoMIPS).
> [ 0.244015] CPU0 attaching sched-domain:
> [ 0.244015] domain 0: span 0-1
> [ 0.244015] groups: 0 1
> [ 0.244015] domain 1: span 0-1
> [ 0.244015] groups: 0-1
> [ 0.244015] CPU1 attaching sched-domain:
> [ 0.244015] domain 0: span 0-1
> [ 0.244015] groups: 1 0
> [ 0.244015] domain 1: span 0-1
> [ 0.244015] groups: 0-1
> [ 0.244015] net_namespace: 660 bytes
> [ 0.244015] Booting paravirtualized kernel on bare hardware
> [ 0.244015] NET: Registered protocol family 16
> [ 0.244015] ACPI: bus type pci registered
> [ 0.256016] PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=2
> [ 0.256016] PCI: Using configuration type 1 for base access
> [ 0.256016] Setting up standard PCI resources
> [ 0.264016] ACPI: EC: Look up EC in DSDT
> [ 0.267115] ACPI: Interpreter enabled
> [ 0.267175] ACPI: (supports S0 S4 S5)
> [ 0.267343] ACPI: Using IOAPIC for interrupt routing
> [ 0.272017] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.276017] ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 10 11 15) *3
> [ 0.276017] ACPI: PCI Interrupt Link [RAID] (IRQs 11) *0, disabled.
> [ 0.276017] ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 *11 15)
> [ 0.276017] ACPI: PCI Interrupt Link [IN19] (IRQs *4 5 7 10 11 15)
> [ 0.276017] ACPI: PCI Interrupt Link [IN21] (IRQs 4 *5 7 10 11 15)
> [ 0.276017] ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0,
> disabled.
> [ 0.276017] ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 *11 15)
> [ 0.276487] ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 *7 10 11 15)
> [ 0.276951] ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 *10 11 15)
> [ 0.277419] ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 *11 15)
> [ 0.280017] ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 *10 11 15)
> [ 0.280481] ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0,
> disabled.
> [ 0.282147] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.282147] pnp: PnP ACPI init
> [ 0.282147] ACPI: bus type pnp registered
> [ 0.286148] pnp: PnP ACPI: found 10 devices
> [ 0.286148] ACPI: ACPI bus type pnp unregistered
> [ 0.286148] PnPBIOS: Disabled by ACPI PNP
> [ 0.286148] PCI: Using ACPI for IRQ routing
> [ 0.295447] system 00:01: ioport range 0xf50-0xf58 has been reserved
> [ 0.295507] system 00:01: ioport range 0x408-0x40f has been reserved
> [ 0.295564] system 00:01: ioport range 0x900-0x903 has been reserved
> [ 0.295622] system 00:01: ioport range 0x904-0x904 has been reserved
> [ 0.295680] system 00:01: ioport range 0x910-0x911 has been reserved
> [ 0.295738] system 00:01: ioport range 0x920-0x923 has been reserved
> [ 0.295796] system 00:01: ioport range 0x930-0x937 has been reserved
> [ 0.295853] system 00:01: ioport range 0x940-0x947 has been reserved
> [ 0.295911] system 00:01: ioport range 0x950-0x957 has been reserved
> [ 0.295969] system 00:01: ioport range 0xc06-0xc08 has been reserved
> [ 0.296027] system 00:01: ioport range 0xc14-0xc14 has been reserved
> [ 0.296085] system 00:01: ioport range 0xc49-0xc4a has been reserved
> [ 0.296142] system 00:01: ioport range 0xc50-0xc52 has been reserved
> [ 0.296199] system 00:01: ioport range 0xc6c-0xc6f has been reserved
> [ 0.296258] system 00:01: ioport range 0x230-0x233 has been reserved
> [ 0.296315] system 00:01: ioport range 0x260-0x267 has been reserved
> [ 0.296373] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.296431] system 00:01: ioport range 0x700-0x713 has been reserved
> [ 0.296487] system 00:01: ioport range 0x800-0x81f has been reserved
> [ 0.296545] system 00:01: ioport range 0xc80-0xc83 has been reserved
> [ 0.298424] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
> [ 0.298482] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
> [ 0.298542] system 00:01: ioport range 0x1900-0x1903 has been reserved
> [ 0.329947] PCI: Bridge: 0000:00:07.0
> [ 0.330004] IO window: 3000-3fff
> [ 0.330061] MEM window: 0xf7800000-0xf7bfffff
> [ 0.330117] PREFETCH window: disabled.
> [ 0.330174] PCI: Bridge: 0000:00:08.0
> [ 0.330227] IO window: 4000-4fff
> [ 0.330283] MEM window: 0xf7c00000-0xf7ffffff
> [ 0.330339] PREFETCH window: disabled.
> [ 0.330459] NET: Registered protocol family 2
> [ 0.341936] IP route cache hash table entries: 32768 (order: 5,
> 131072 bytes)
> [ 0.342413] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.344098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.344306] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.344306] TCP reno registered
> [ 0.349538] NET: Registered protocol family 1
> [ 0.349763] checking if image is initramfs... it is
> [ 0.487730] Freeing initrd memory: 1838k freed
> [ 0.489138] platform rtc_cmos: registered platform RTC device (no PNP
> device found)
> [ 0.493115] audit: initializing netlink socket (disabled)
> [ 0.493115] type=2000 audit(1263974814.484:1): initialized
> [ 0.493115] highmem bounce pool size: 64 pages
> [ 0.493115] Total HugeTLB memory allocated, 0
> [ 0.493115] VFS: Disk quotas dquot_6.5.1
> [ 0.493115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.493115] msgmni has been set to 1746
> [ 0.493115] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 0.493115] io scheduler noop registered
> [ 0.493115] io scheduler anticipatory registered
> [ 0.493115] io scheduler deadline registered
> [ 0.493115] io scheduler cfq registered (default)
> [ 0.493115] pci 0000:00:00.0: MSI quirk detected; MSI disabled
> [ 0.493115] pci 0000:00:00.1: MSI quirk detected; MSI disabled
> [ 0.493115] pci 0000:00:03.0: Boot video device
> [ 0.507092] pci 0000:01:04.0: Firmware left e100 interrupts enabled;
> disabling
> [ 0.507177] pci 0000:01:05.0: Firmware left e100 interrupts enabled;
> disabling
> [ 0.507262] pci 0000:02:04.0: Firmware left e100 interrupts enabled;
> disabling
> [ 0.507346] pci 0000:02:05.0: Firmware left e100 interrupts enabled;
> disabling
> [ 0.509114] isapnp: Scanning for PnP cards...
> [ 0.818524] isapnp: No Plug & Play device found
> [ 0.821109] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [ 0.821109] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.821109] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.825106] brd: module loaded
> [ 0.825106] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at
> 0x60,0x64 irq 1,12
> [ 0.826135] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.826197] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.828749] mice: PS/2 mouse device common for all mice
> [ 0.828749] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
> [ 0.828749] rtc0: alarms up to one day
> [ 0.831691] Switched to high resolution mode on CPU 1
> [ 0.832804] Switched to high resolution mode on CPU 0
> [ 0.844745] input: AT Translated Set 2 keyboard as /class/input/input0
> [ 0.844745] cpuidle: using governor ladder
> [ 0.844745] cpuidle: using governor menu
> [ 0.844745] No iBFT detected.
> [ 0.844745] TCP cubic registered
> [ 0.844745] NET: Registered protocol family 17
> [ 0.844745] Using IPI No-Shortcut mode
> [ 0.844745] registered taskstats version 1
> [ 0.844745] rtc_cmos rtc_cmos: setting system clock to 2010-01-20
> 08:06:55 UTC (1263974815)
> [ 0.844745] Freeing unused kernel memory: 244k freed
> [ 0.912745] SCSI subsystem initialized
> [ 0.916762] HP CISS Driver (v 3.6.20)
> [ 0.916762] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 21 (level,
> low) -> IRQ 21
> [ 0.958551] cciss0: <0x46> at PCI 0000:00:06.0 IRQ 21 using DAC
> [ 0.969814] blocks= 71119755 block_size= 512
> [ 0.973801] heads=255, sectors=63, cylinders=4427
> [ 0.973803]
> [ 0.975277] blocks= 71119755 block_size= 512
> [ 0.975277] heads=255, sectors=63, cylinders=4427
> [ 0.975277]
> [ 0.975277] cciss/c0d0: p1 p2 < p5 >
> [ 1.003291] ACPI: ACPI0007:00 is registered as cooling_device0
> [ 1.003291] ACPI: ACPI0007:01 is registered as cooling_device1
> [ 1.007286] ACPI: LNXTHERM:01 is registered as thermal_zone0
> [ 1.007286] ACPI: Thermal Zone [THM0] (8 C)
> [ 1.371292] PM: Starting manual resume from disk
> [ 1.402844] kjournald starting. Commit interval 5 seconds
> [ 1.402844] EXT3-fs: mounted filesystem with ordered data mode.
> [ 2.517164] udevd version 125 started
> [ 3.429486] Linux agpgart interface v0.103
> [ 3.461501] tg3.c:v3.92.1 (June 9, 2008)
> [ 3.461591] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level,
> low) -> IRQ 19
> [ 3.504207] eth0: Tigon3 [partno(N/A) rev 1002 PHY(5703)]
> (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:85:69:7b:9a
> [ 3.504315] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
> WireSpeed[1] TSOcap[1]
> [ 3.504411] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
> [ 3.516651] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 3.526127] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 3.605524] No dock devices found.
> [ 3.654713] Emulex LightPulse Fibre Channel SCSI driver 8.2.6
> [ 3.654781] Copyright(c) 2004-2008 Emulex. All rights reserved.
> [ 3.654902] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 27 (level,
> low) -> IRQ 27
> [ 3.696556] scsi0 : on PCI bus 00 device 48 irq 27
> [ 5.722476] libata version 3.00 loaded.
> [ 5.736537] input: PC Speaker as /class/input/input1
> [ 5.814374] usbcore: registered new interface driver usbfs
> [ 5.814485] usbcore: registered new interface driver hub
> [ 5.857757] usbcore: registered new device driver usb
> [ 5.862214] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
> (OHCI) Driver
> [ 5.908648] input: Power Button (FF) as /class/input/input2
> [ 5.954659] ACPI: Power Button (FF) [PWRF]
> [ 6.369720] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
> [ 6.477188] Floppy drive(s): fd0 is 1.44M
> [ 6.494944] FDC 0 is a National Semiconductor PC87306
> [ 6.589343] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
> [ 6.589415] e100: Copyright(c) 1999-2006 Intel Corporation
> [ 6.609750] Error: Driver 'pcspkr' is already registered, aborting...
> [ 6.774218] parport_pc 00:07: reported by Plug and Play ACPI
> [ 6.774218] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 13.751240] lpfc 0000:00:09.0: 0:0442 Adapter failed to init, mbxCmd
> x88 CONFIG_PORT, mbxStatus x12 Data: x0
> [ 18.555926] lpfc 0000:00:09.0: 0:0442 Adapter failed to init, mbxCmd
> x88 CONFIG_PORT, mbxStatus x12 Data: x0
> [ 18.559835] ACPI: PCI interrupt for device 0000:00:09.0 disabled
> [ 18.559835] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
> [ 18.924658] ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 10
> [ 18.924754] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [IUSB] -> GSI
> 10 (level, low) -> IRQ 10
> [ 18.924962] ohci_hcd 0000:00:0f.2: OHCI Host Controller
> [ 18.925500] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned
> bus number 1
> [ 18.925603] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xf5f50000
> [ 18.981950] usb usb1: configuration #1 chosen from 1 choice
> [ 18.982048] hub 1-0:1.0: USB hub found
> [ 18.982115] hub 1-0:1.0: 4 ports detected
> [ 19.093719] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 19.093719] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 19.093722] usb usb1: Product: OHCI Host Controller
> [ 19.093776] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
> [ 19.093831] usb usb1: SerialNumber: 0000:00:0f.2
> [ 19.101835] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 23 (level,
> low) -> IRQ 23
> [ 19.201851] e100: eth1: e100_probe: addr 0xf7bf0000, irq 23, MAC addr
> 00:02:a5:8e:ce:a6
> [ 19.201851] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 24 (level,
> low) -> IRQ 24
> [ 19.297833] e100: eth2: e100_probe: addr 0xf79f0000, irq 24, MAC addr
> 00:02:a5:8e:ce:a7
> [ 19.297866] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 25 (level,
> low) -> IRQ 25
> [ 19.397831] e100: eth3: e100_probe: addr 0xf7ff0000, irq 25, MAC addr
> 00:02:a5:89:86:92
> [ 19.397831] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 26 (level,
> low) -> IRQ 26
> [ 19.497848] e100: eth4: e100_probe: addr 0xf7df0000, irq 26, MAC addr
> 00:02:a5:89:86:93
> [ 19.497848] Uniform Multi-Platform E-IDE driver
> [ 19.497934] ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> [ 19.507840] SvrWks CSB6: IDE controller (0x1166:0x0217 rev 0xa0) at
> PCI slot 0000:00:0e.0
> [ 19.507840] SvrWks CSB6: not 100% native mode: will probe irqs later
> [ 19.507840] ide2: BM-DMA at 0x2000-0x2007
> [ 19.507840] Probing IDE interface ide2...
> [ 20.762833] hdf: LITE-ON DVD SOHD-16P9S, ATAPI CD/DVD-ROM drive
> [ 21.150606] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [ 21.150690] hdf: UDMA/44 mode selected
> [ 21.150881] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 21.234227] hdf: ATAPI 48X DVD-ROM drive, 254kB Cache
> [ 21.234227] Uniform CD-ROM driver Revision: 3.20
> [ 21.875344] Adding 1510068k swap on /dev/cciss/c0d0p5. Priority:-1
> extents:1 across:1510068k
> [ 22.220130] EXT3 FS on cciss/c0d0p1, internal journal
> [ 22.690017] loop: module loaded
> [ 24.737362] NET: Registered protocol family 10
> [ 24.738441] lo: Disabled Privacy Extensions
> [ 24.738660] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 24.942663] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [ 24.942663] tg3: eth0: Flow control is on for TX and on for RX.
> [ 24.942924] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 36.889054] eth0: no IPv6 routers present
>
>


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-20-2010, 07:36 PM
Marco Vaschetto
 
Default problem whit optic fibre adapter (emulex LP952)

Stan Hoeppner ha scritto:

This may point you in the right direction:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1263982812391+28 353475&threadId=760337

Looks like you might need to update the card's firmware, try it in another PCI-X
slot, or remove all the other PCI/X cards to see if there is a conflict. I
don't have any direct experience with FC cards and Linux, only VMware ESX. I
have seen situations where drivers fail when the card is not attached to a
switch. Way back in the day I've seen SCSI drivers fail during boot if there
were no drives attached. Goofy stuff.

I'm betting you're in a similar goofy situation. That card and driver combo
appear to be finicky.


I try to take out all the pci device, but infect I never try to take out
the pci array controller I hope the machine can start whit ide
controller on-board


now I fix the problem of libfc before is missing now have in the new
kernel but the problem still have.


Later try whit out a array controller pci my idea is finish.

anyone have some idea?

Thank's

Marco Vaschetto





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-21-2010, 12:45 AM
Stan Hoeppner
 
Default problem whit optic fibre adapter (emulex LP952)

Marco Vaschetto put forth on 1/20/2010 2:36 PM:
> Stan Hoeppner ha scritto:
>> This may point you in the right direction:
>> http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1263982812391+28 353475&threadId=760337
>>
>>
>> Looks like you might need to update the card's firmware, try it in
>> another PCI-X
>> slot, or remove all the other PCI/X cards to see if there is a
>> conflict. I
>> don't have any direct experience with FC cards and Linux, only VMware
>> ESX. I
>> have seen situations where drivers fail when the card is not attached
>> to a
>> switch. Way back in the day I've seen SCSI drivers fail during boot
>> if there
>> were no drives attached. Goofy stuff.
>>
>> I'm betting you're in a similar goofy situation. That card and driver
>> combo
>> appear to be finicky.
>>
>>
> I try to take out all the pci device, but infect I never try to take out
> the pci array controller I hope the machine can start whit ide
> controller on-board
>
> now I fix the problem of libfc before is missing now have in the new
> kernel but the problem still have.
>
> Later try whit out a array controller pci my idea is finish.
>
> anyone have some idea?

Did you read the first post in the document linked above at hp.com? Have you
updated the adapter firmware to the latest version? (Ignore the 2nd and 3rd
posts as that driver kit is 6 years old now)

Also, hardware drivers are kernel components. You're better off asking for help
with this FC adapter on the Linux-scsi list or lkml than on debian-users.

http://vger.kernel.org/vger-lists.html#linux-scsi

Debian is not a "commercial" distribution. Fiber channel is only found in
commercial environments. Thus, most of the people around the world using FC
adapters with Linux are NOT using Debian Linux, but rather Red Hat Enterprise or
SuSE Linux. Notice I am the only person on this list to try to help you? And
as I previously stated, I've not actually used FC cards with Linux on bare
metal. You need to be talking to an audience that actually has FC experience on
bare metal Linux. You may even try a SuSE or Red Hat mailing list as well.

Sorry I couldn't be or more help.

--
Stan


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-21-2010, 09:29 AM
Marco Vaschetto
 
Default problem whit optic fibre adapter (emulex LP952)

Stan Hoeppner ha scritto:

Marco Vaschetto put forth on 1/20/2010 2:36 PM:


Stan Hoeppner ha scritto:


This may point you in the right direction:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1263982812391+28 353475&threadId=760337


Looks like you might need to update the card's firmware, try it in
another PCI-X
slot, or remove all the other PCI/X cards to see if there is a
conflict. I
don't have any direct experience with FC cards and Linux, only VMware
ESX. I
have seen situations where drivers fail when the card is not attached
to a
switch. Way back in the day I've seen SCSI drivers fail during boot
if there
were no drives attached. Goofy stuff.

I'm betting you're in a similar goofy situation. That card and driver
combo
appear to be finicky.




I try to take out all the pci device, but infect I never try to take out
the pci array controller I hope the machine can start whit ide
controller on-board

now I fix the problem of libfc before is missing now have in the new
kernel but the problem still have.

Later try whit out a array controller pci my idea is finish.

anyone have some idea?



Did you read the first post in the document linked above at hp.com? Have you
updated the adapter firmware to the latest version? (Ignore the 2nd and 3rd
posts as that driver kit is 6 years old now)

Also, hardware drivers are kernel components. You're better off asking for help
with this FC adapter on the Linux-scsi list or lkml than on debian-users.

http://vger.kernel.org/vger-lists.html#linux-scsi

Debian is not a "commercial" distribution. Fiber channel is only found in
commercial environments. Thus, most of the people around the world using FC
adapters with Linux are NOT using Debian Linux, but rather Red Hat Enterprise or
SuSE Linux. Notice I am the only person on this list to try to help you? And
as I previously stated, I've not actually used FC cards with Linux on bare
metal. You need to be talking to an audience that actually has FC experience on
bare metal Linux. You may even try a SuSE or Red Hat mailing list as well.

Sorry I couldn't be or more help.



I want say tank you for your time,

and I have just a question but this is about the ESX, in my company we
do testing about virtualization solution the machine whit the optic
fibre must


do a iSCSI server, my question is how you feel about ESX and do you have
try ESXi ? I mean about the performance, in my company have do the


benchmark on the windows se 2k3 virtualized on xenserver but we wold
like try ESXi and ESX witch one is better for you?


Tank's again for your time.

Marco Vaschetto


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-21-2010, 06:40 PM
Gilles Mocellin
 
Default problem whit optic fibre adapter (emulex LP952)

On Wed, Jan 20, 2010 at 07:45:58PM -0600, Stan Hoeppner wrote:
> Marco Vaschetto put forth on 1/20/2010 2:36 PM:
[...]

> Debian is not a "commercial" distribution. Fiber channel is only found in
> commercial environments. Thus, most of the people around the world using FC
> adapters with Linux are NOT using Debian Linux, but rather Red Hat Enterprise or
> SuSE Linux. Notice I am the only person on this list to try to help you? And
> as I previously stated, I've not actually used FC cards with Linux on bare
> metal. You need to be talking to an audience that actually has FC experience on
> bare metal Linux. You may even try a SuSE or Red Hat mailing list as well.

Sorry but I use Debian on our SAN, with QLogic and Emulex FC cards.
I have no problems, but use different Emulex models...
(Zephyr-X LightPulse Fibre Channel Host Adapter)

You're right that with Debian, it is not easy to have the hardware vendor support
you...
There support Matirix is so restrictive about firmware and driver
versions... (HP here)
 

Thread Tools




All times are GMT. The time now is 09:33 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org