FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 01-07-2010, 08:14 AM
Olivier Ramare
 
Default Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful

Dear friends,

I tried to enter the realm of mp3/mp4-reader utensils.
I bought an archos 3 vision:

http://www.archos.com/products/mp3_players/archos_3/specs.html?country=ng&lang=en

since it seems to work with my debian

Linux lib59-3-82-233-191-86 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC
2009 i686 GNU/Linux


I added the usbmount module (hal and pmount were already aboard).
I managed to see an icon once, and dmesg was saying it didn't
like mu utf8 for a FAT system. Nothing much to worry about if
I'm not wrong.
It seems the usb (2) port has something awry --

So some elements of diagnosis:
----------------------------------------------------
lsusb (first try):
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 071b:3203 Domain Technologies, Inc.
Bus 001 Device 002: ID 03f0:4117 Hewlett-Packard Printing Support
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The "Domain Technologies, Inc. " is the archos guy.
dmessg (interesting part):
[ 1033.548015] usb 1-3: new high speed USB device using ehci_hcd and
address 6

[ 1033.672013] usb 1-3: device descriptor read/64, error -71
[ 1034.304012] usb 1-3: device not accepting address 6, error -71
[ 1034.416021] usb 1-3: new high speed USB device using ehci_hcd and
address 7

[ 1034.544014] usb 1-3: device descriptor read/64, error -71
[ 1034.772014] usb 1-3: device descriptor read/64, error -71
[ 1034.988012] usb 1-3: new high speed USB device using ehci_hcd and
address 8

[ 1035.035414] usb 1-3: string descriptor 0 read error: -71
[ 1035.035419] usb 1-3: New USB device found, idVendor=071b, idProduct=3203
[ 1035.035423] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[ 1035.035536] usb 1-3: configuration #1 chosen from 1 choice
[ 1035.119892] Initializing USB Mass Storage driver...
[ 1035.120500] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1035.120635] usbcore: registered new interface driver usb-storage
[ 1035.120642] USB Mass Storage support registered.
[ 1035.121105] usb-storage: device found at 8
[ 1035.121109] usb-storage: waiting for device to settle before scanning
[ 1040.124450] usb-storage: device scan complete
[ 1040.456431] scsi 2:0:0:0: Direct-Access Archos3 1.00 PQ: 0 ANSI: 0
[ 1040.460291] sd 2:0:0:0: [sdb] 16023552 512-byte hardware sectors:
(8.20 GB/7.64 GiB)

[ 1040.460298] sd 2:0:0:0: [sdb] Assuming Write Enabled
[ 1040.460301] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1040.511410] sd 2:0:0:0: [sdb] Assuming Write Enabled
[ 1040.511416] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1040.511423] sdb:
[ 1040.512388] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1040.736023] usb 1-3: reset high speed USB device using ehci_hcd and
address 8

[ 1040.804307] usb 1-3: USB disconnect, address 8
[ 1040.804363] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804369] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK

[ 1040.804376] end_request: I/O error, dev sdb, sector 64
[ 1040.804382] Buffer I/O error on device sdb, logical block 8
[ 1040.804390] Buffer I/O error on device sdb, logical block 9
[ 1040.804395] Buffer I/O error on device sdb, logical block 10
[ 1040.804400] Buffer I/O error on device sdb, logical block 11
[ 1040.804405] Buffer I/O error on device sdb, logical block 12
[ 1040.804410] Buffer I/O error on device sdb, logical block 13
[ 1040.804415] Buffer I/O error on device sdb, logical block 14
[ 1040.804420] Buffer I/O error on device sdb, logical block 15
[ 1040.804539] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804544] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK

[ 1040.804550] end_request: I/O error, dev sdb, sector 0
[ 1040.804555] Buffer I/O error on device sdb, logical block 0
[ 1040.804563] Buffer I/O error on device sdb, logical block 1
[ 1040.804594] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804598] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK

[ 1040.804604] end_request: I/O error, dev sdb, sector 128
[ 1040.804623] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804628] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK

[ 1040.804633] end_request: I/O error, dev sdb, sector 192
-----------------------------------------------------------
lsusb (later):
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 03f0:4117 Hewlett-Packard Printing Support
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-----------------------------------------------------------

Sometimes, it is recognized at boot time:
[ 17.844026] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 17.980915] usb 1-1: New USB device found, idVendor=071b, idProduct=3203
[ 17.980970] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[ 17.981022] usb 1-1: Product: Archos3
[ 17.981069] usb 1-1: Manufacturer: ARCHOS
[ 17.981116] usb 1-1: SerialNumber: USBV1.00
[ 17.981271] usb 1-1: configuration #1 chosen from 1 choice
[ 17.981755] hub 1-0:1.0: over-current change on port 5
[ 18.088021] hub 1-0:1.0: over-current change on port 6
[ 18.154180] Initializing USB Mass Storage driver...
[ 18.154546] scsi2 : SCSI emulation for USB Mass Storage devices
[ 18.154750] usbcore: registered new interface driver usb-storage
[ 18.154805] USB Mass Storage support registered.
[ 18.155044] usb-storage: device found at 3
[ 18.155049] usb-storage: waiting for device to settle before scanning
[ 18.192023] hub 1-0:1.0: over-current change on port 7
[ 18.296113] hub 1-0:1.0: over-current change on port 8
[ 23.152204] usb-storage: device scan complete
[ 23.272020] usb 1-1: reset high speed USB device using ehci_hcd and
address 3

[ 23.620008] eth0: no IPv6 routers present
[ 23.808019] usb 1-1: device not accepting address 3, error -71
[ 23.920025] usb 1-1: reset high speed USB device using ehci_hcd and
address 3

[ 24.444015] usb 1-1: device not accepting address 3, error -71
[ 24.556024] usb 1-1: reset high speed USB device using ehci_hcd and
address 3

---------------------------------------------------------------------
So either error -71, either mounted as sdb with error as a result --
Any hint ? I'm in quite of a fix --
Best,
Amities,
Olivier


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-07-2010, 08:37 AM
Camaleón
 
Default Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful

On Thu, 07 Jan 2010 10:14:49 +0100, Olivier Ramare wrote:

> I tried to enter the realm of mp3/mp4-reader utensils. I bought an
> archos 3 vision:
>
> http://www.archos.com/products/mp3_players/archos_3/specs.html?
country=ng&lang=en
>
> since it seems to work with my debian
>
> Linux lib59-3-82-233-191-86 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC
> 2009 i686 GNU/Linux
>
> I added the usbmount module (hal and pmount were already aboard). I
> managed to see an icon once, and dmesg was saying it didn't like mu utf8
> for a FAT system. Nothing much to worry about if I'm not wrong.
> It seems the usb (2) port has something awry --
>
> So some elements of diagnosis:

(...)

[ 23.808019] usb 1-1: device
> not accepting address 3, error -71 [ 23.920025] usb 1-1: reset high
> speed USB device using ehci_hcd and address 3
> [ 24.444015] usb 1-1: device not accepting address 3, error -71 [
> 24.556024] usb 1-1: reset high speed USB device using ehci_hcd and
> address 3
> ---------------------------------------------------------------------
> So
> either error -71, either mounted as sdb with error as a result -- Any
> hint ? I'm in quite of a fix --

1/ Try plug in the device into another usb port of the board.
2/ Try with another usb cable.
3/ Try to connect the device in another computer.

And see how it behaves in each case.

I would suspect the usb card/host controller going bad. How old is your
computer?

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-07-2010, 09:00 AM
Olivier Ramare
 
Default Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful

Camaleón a écrit :

1/ Try plug in the device into another usb port of the board.


Ok, I have a second usb2 port for the printing machine.
So I unplugged this one and plugged my archos machine there,
to no avail.

I plugged the printer to the usb-port I was using for the archos
and it works (I even effectively printed a page).

2/ Try with another usb cable.


I don't have any around.

3/ Try to connect the device in another computer.


That's going to be hard, but I'll try in some hours.

And see how it behaves in each case.

I would suspect the usb card/host controller going bad. How old is your
computer?

About 6 years old I think.
The usb port has been used very less and I even cleaned everything
yesterday

------------------------------------------------------------------------------------------------------
Additional element:
In between it got recognized as (/etc/mtab)
----------------------------------------------
/dev/sdb /media/Archos3 vfat
rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,s hortname=mixed,dmask=0077,utf8=1,flush
0 0
------------------------------------------------
I tried to copy a file:
[ 3501.864011] usb 1-1: device descriptor read/64, error -71
[ 3502.036311] usb 1-1: USB disconnect, address 10
[ 3502.036360] sd 4:0:0:0: [sdb] Unhandled error code
[ 3502.036365] sd 4:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK

[ 3502.036372] end_request: I/O error, dev sdb, sector 316760
[...]
[ 3502.037647] sd 4:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK

[ 3502.037654] end_request: I/O error, dev sdb, sector 316952
[ 3502.046704] VFS: busy inodes on changed media or resized disk sdb
[ 3502.050904] FAT: Directory bread(block 316688) failed
[ 3502.050955] FAT: Directory bread(block 316689) failed
[...]
[ 3502.057225] FAT: FAT read failed (blocknr 340)
[ 3502.066281] FAT: unable to read inode block for updating (i_pos 5067017)
------------------------------------------------------

Many thanks for the fast reply!
Best,
Amities,
Olivier


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-07-2010, 10:21 AM
Camaleón
 
Default Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful

On Thu, 07 Jan 2010 11:00:21 +0100, Olivier Ramare wrote:

> Camaleón a écrit :
>> 1/ Try plug in the device into another usb port of the board.
>>
> Ok, I have a second usb2 port for the printing machine. So I unplugged
> this one and plugged my archos machine there, to no avail.
>
> I plugged the printer to the usb-port I was using for the archos and it
> works (I even effectively printed a page).
>> 2/ Try with another usb cable.
>>
> I don't have any around.
>> 3/ Try to connect the device in another computer.
>>
> That's going to be hard, but I'll try in some hours.
>> And see how it behaves in each case.
>>
>> I would suspect the usb card/host controller going bad. How old is your
>> computer?
> About 6 years old I think.
> The usb port has been used very less and I even cleaned everything
> yesterday

USB ports are deep dependant (let's say "sensible") on power supply and
voltages. Is not uncommon that usb ports get very easily damaged by non-
filtered spikes and after blackouts if the computer is not properly
protected (i.e., if the user has no UPS unit).

------------------------------------------------------------------------------------------------------
> Additional element:
> In between it got recognized as (/etc/mtab)
> ---------------------------------------------- /dev/sdb /media/Archos3
> vfat
>
rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,s hortname=mixed,dmask=0077,utf8=1,flush
> 0 0
> ------------------------------------------------ I tried to copy a file:
> [ 3501.864011] usb 1-1: device descriptor read/64, error -71 [
> 3502.036311] usb 1-1: USB disconnect, address 10 [ 3502.036360] sd
> 4:0:0:0: [sdb] Unhandled error code [ 3502.036365] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
> [ 3502.036372] end_request: I/O error, dev sdb, sector 316760 [...]
> [ 3502.037647] sd 4:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
> driverbyte=DRIVER_OK
> [ 3502.037654] end_request: I/O error, dev sdb, sector 316952 [
> 3502.046704] VFS: busy inodes on changed media or resized disk sdb [
> 3502.050904] FAT: Directory bread(block 316688) failed [ 3502.050955]
> FAT: Directory bread(block 316689) failed [...]
> [ 3502.057225] FAT: FAT read failed (blocknr 340) [ 3502.066281] FAT:
> unable to read inode block for updating (i_pos 5067017)
> ------------------------------------------------------

You are still facing problems with the usb port ("disconnect" and "read
errors") which are definitively not good.

Another test you can try is by attaching another usb flash disk and check
the results (dmesg). A printer will hardy tell you how bad is your usb
port ;-)

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 01-07-2010, 07:04 PM
Olivier Ramare
 
Default Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful

Dear all,

About tests:
(1) I plugged the archos device on an old windows (vista) computer
and it worked, I copied some files and it plays music.
This satisfies me from another aspect: I was afraid the usb
plugs had evolved, but both these computers have about the
same age.
(2) I plugged a usb key on both my usb2 ports and it works.
Well, this key would work also with usb 1, so it is a suboptimal
test.
(3) I tried to help my system by adding an entry in /etc/fstab
and creating the corresponding mount point (/media/Archos3)
---------------------------------------
All to no avail, though things seem to be a bit clearer.
[...]
USB ports are deep dependant (let's say "sensible") on power supply and
voltages. Is not uncommon that usb ports get very easily damaged by non-
filtered spikes and after blackouts if the computer is not properly
protected (i.e., if the user has no UPS unit).


I guess my powering system is not very stable.
Sometimes my fan even does not start without my giving it a shove.
I have a "Sensing sensors limits: failed" at start.

I still get this -71 error around "address 3":
---------------------------------------------------------------------------------------
[ 286.012023] usb 1-1: new high speed USB device using ehci_hcd and
address 3

[ 286.353230] usb 1-1: New USB device found, idVendor=071b, idProduct=3203
[ 286.353236] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[ 286.353240] usb 1-1: Product: Archos3
[ 286.353243] usb 1-1: Manufacturer: ARCHOS
[ 286.353245] usb 1-1: SerialNumber: USBV1.00

[ 286.353360] usb 1-1: configuration #1 chosen from 1 choice
[ 286.354645] hub 1-0:1.0: over-current change on port 5
[ 286.425060] Initializing USB Mass Storage driver...
[ 286.427051] scsi2 : SCSI emulation for USB Mass Storage devices
[ 286.427190] usbcore: registered new interface driver usb-storage
[ 286.427197] USB Mass Storage support registered.
[ 286.427669] usb-storage: device found at 3
[ 286.427674] usb-storage: waiting for device to settle before scanning
[ 286.456056] hub 1-0:1.0: over-current change on port 6
[ 286.560024] hub 1-0:1.0: over-current change on port 7
[ 286.664033] hub 1-0:1.0: over-current change on port 8
[ 291.428019] usb-storage: device scan complete
[ 291.544091] usb 1-1: reset high speed USB device using ehci_hcd and
address 3

[ 292.076018] usb 1-1: device not accepting address 3, error -71
[ 292.132804] usb 1-1: USB disconnect, address 3
------------------------------------------------------------------------------------------------------
I definitely don't know why [291.544091] it is trying to reset the device .
In [286.012023], it is detected to use address 3, but in [292.076018]
it seems it does not.
This is foreign language to me
Best,
Amities,
Olivier


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 05:21 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org