atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
 

On Sun, Nov 8, 2009 at 12:30 PM, Mathieu Malaterre
<mathieu.malaterre@gmail.com> wrote:
> Hi there,
>
> *When trying to setup wifi on my DELL Precision M6300, I discover
> that pressing the Radio Frequency Kill Switch (Fn+F2), reported some
> bizarre stuff in dmesg:
>
> [ *147.025486] iwlagn 0000:0c:00.0: Radio Frequency Kill Switch is On:
> [ *147.025491] Kill switch must be turned off for wireless networking to work.
> [ *147.026488] atkbd.c: Unknown key pressed (translated set 2, code
> 0x88 on isa0060/serio0).
> [ *147.026495] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>
>
> which lead to:
>
> $ sudo /sbin/iwconfig
> lo * * * *no wireless extensions.
>
> eth0 * * *no wireless extensions.
>
> wmaster0 *no wireless extensions.
>
> wlan0 * * IEEE 802.11abgn *ESSID:""
> * * * * *Mode:Managed *Frequency:2.412 GHz *Access Point: Not-Associated
> * * * * *Tx-Power=0 dBm
> * * * * *Retry min limit:7 * RTS thr:off * Fragment thr:off
> * * * * *Encryption key:off
> * * * * *Power Management:off
> * * * * *Link Quality:0 *Signal level:0 *Noise level:0
> * * * * *Rx invalid nwid:0 *Rx invalid crypt:0 *Rx invalid frag:0
> * * * * *Tx excessive retries:0 *Invalid misc:0 * Missed beacon:0
>
> pan0 * * *no wireless extensions.
>
>
> and then pressing it again:
>
> [ *147.025486] iwlagn 0000:0c:00.0: Radio Frequency Kill Switch is On:
> [ *147.025491] Kill switch must be turned off for wireless networking to work.
> [ *147.026488] atkbd.c: Unknown key pressed (translated set 2, code
> 0x88 on isa0060/serio0).
> [ *147.026495] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
> [ *372.677144] CE: hpet increasing min_delta_ns to 15000 nsec
> [ *446.068109] atkbd.c: Unknown key pressed (translated set 2, code
> 0x88 on isa0060/serio0).
> [ *446.068117] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>
>
> $ sudo /sbin/iwconfig
> lo * * * *no wireless extensions.
>
> eth0 * * *no wireless extensions.
>
> wmaster0 *no wireless extensions.
>
> wlan0 * * IEEE 802.11abgn *ESSID:""
> * * * * *Mode:Managed *Frequency:2.412 GHz *Access Point: Not-Associated
> * * * * *Tx-Power=0 dBm
> * * * * *Retry min limit:7 * RTS thr:off * Fragment thr:off
> * * * * *Encryption key:off
> * * * * *Power Management:off
> * * * * *Link Quality:0 *Signal level:0 *Noise level:0
> * * * * *Rx invalid nwid:0 *Rx invalid crypt:0 *Rx invalid frag:0
> * * * * *Tx excessive retries:0 *Invalid misc:0 * Missed beacon:0
>
> pan0 * * *no wireless extensions.
>
>
> 1. It seems that Fn+F2 is not working as expected
> 2. If so, what should I do ?
> 3. Should I fill in a bug report ?
>
> Thanks,
>
> --
> Mathieu
>

After discovering

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=475851

the solution was simply to do:

sudo apt-get install -t testing hal-info

Cheers
--
Mathieu


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
 

Hi there,

I am hitting this problem now :

[ 118.586044] atkbd.c: Unknown key pressed (translated set 2, code
0x88 on isa0060/serio0).
[ 118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.


In the past I was able to fix it using hal-info from testing, but
today this is not working anymore. What do I need to get the special
WLAN key (Alt-F2 on DELL M6300) to work on a Debian/Lenny system ?

dmesg output:
[ 118.586044] iwl4965: Radio Frequency Kill Switch is On:
[ 118.586044] Kill switch must be turned off for wireless networking to work.
[ 118.586044] atkbd.c: Unknown key pressed (translated set 2, code
0x88 on isa0060/serio0).
[ 118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 118.716437] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 118.725402] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.020807] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.030904] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.301369] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.509042] CE: hpet increasing min_delta_ns to 15000 nsec
[ 119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.734078] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 120.090892] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC
[ 120.163248] iwl4965: WARNING: Requesting MAC access during RFKILL
wakes up NIC


Package:

$ apt-cache policy hal hal-info
hal:
Installed: 0.5.13-4
Candidate: 0.5.13-4
Version table:
0.5.13-6 0
100 http://ftp.fr.debian.org unstable/main Packages
*** 0.5.13-4 0
200 http://ftp.fr.debian.org testing/main Packages
100 /var/lib/dpkg/status
0.5.11-8 0
500 http://ftp.fr.debian.org lenny/main Packages
hal-info:
Installed: 20091130-1
Candidate: 20091130-1
Version table:
*** 20091130-1 0
100 http://ftp.fr.debian.org unstable/main Packages
100 /var/lib/dpkg/status
20090716-1 0
200 http://ftp.fr.debian.org testing/main Packages
20080508+git20080601-1 0
500 http://ftp.fr.debian.org lenny/main Packages


The worst part is that I can see the DELL keycode:

$ grep F2 /usr/share/hal/fdi/information/10freedesktop/30-keymap-dell.fdi
<append key="input.keymap.data"
type="strlist">e008:wlan</append> <!-- Fn+F2 Turn On/Off Wireless -->

Thanks again !
--
Mathieu


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
 

If that helps I can get lshal -m to work for the following:

12:38:47.903: computer_logicaldev_input_2 condition ButtonPressed =
switch-videomode
12:38:51.014: computer_power_supply_battery_BAT0 property
battery.voltage.current = 12578 (0x3122)

I tried pressing Fn+F1 -> F12, but only two got recognized. The
hal-info seems ok, but the event seems in-turn not to be registered...

Thanks for help

On Wed, Dec 2, 2009 at 12:35 PM, Mathieu Malaterre
<mathieu.malaterre@gmail.com> wrote:
> Hi there,
>
> *I am hitting this problem now :
>
> [ *118.586044] atkbd.c: Unknown key pressed (translated set 2, code
> 0x88 on isa0060/serio0).
> [ *118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>
>
> *In the past I was able to fix it using hal-info from testing, but
> today this is not working anymore. What do I need to get the special
> WLAN key (Alt-F2 on DELL M6300) to work on a Debian/Lenny system ?
>
> dmesg output:
> [ *118.586044] iwl4965: Radio Frequency Kill Switch is On:
> [ *118.586044] Kill switch must be turned off for wireless networking to work.
> [ *118.586044] atkbd.c: Unknown key pressed (translated set 2, code
> 0x88 on isa0060/serio0).
> [ *118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
> [ *118.716437] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *118.725402] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.020807] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.030904] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.301369] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.509042] CE: hpet increasing min_delta_ns to 15000 nsec
> [ *119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.734078] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *120.090892] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
> [ *120.163248] iwl4965: WARNING: Requesting MAC access during RFKILL
> wakes up NIC
>
>
> Package:
>
> $ apt-cache policy hal hal-info
> hal:
> *Installed: 0.5.13-4
> *Candidate: 0.5.13-4
> *Version table:
> * * 0.5.13-6 0
> * * * *100 http://ftp.fr.debian.org unstable/main Packages
> **** 0.5.13-4 0
> * * * *200 http://ftp.fr.debian.org testing/main Packages
> * * * *100 /var/lib/dpkg/status
> * * 0.5.11-8 0
> * * * *500 http://ftp.fr.debian.org lenny/main Packages
> hal-info:
> *Installed: 20091130-1
> *Candidate: 20091130-1
> *Version table:
> **** 20091130-1 0
> * * * *100 http://ftp.fr.debian.org unstable/main Packages
> * * * *100 /var/lib/dpkg/status
> * * 20090716-1 0
> * * * *200 http://ftp.fr.debian.org testing/main Packages
> * * 20080508+git20080601-1 0
> * * * *500 http://ftp.fr.debian.org lenny/main Packages
>
>
> The worst part is that I can see the DELL keycode:
>
> $ grep F2 /usr/share/hal/fdi/information/10freedesktop/30-keymap-dell.fdi
> * * * * *<append key="input.keymap.data"
> type="strlist">e008:wlan</append> <!-- Fn+F2 Turn On/Off Wireless -->
>
> Thanks again !
> --
> Mathieu
>



--
Mathieu


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
 

installing hotkey-setup seems to get me a little further...

On Wed, Dec 2, 2009 at 12:40 PM, Mathieu Malaterre
<mathieu.malaterre@gmail.com> wrote:
> If that helps I can get lshal -m to work for the following:
>
> 12:38:47.903: computer_logicaldev_input_2 condition ButtonPressed =
> switch-videomode
> 12:38:51.014: computer_power_supply_battery_BAT0 property
> battery.voltage.current = 12578 (0x3122)
>
> I tried pressing Fn+F1 -> F12, but only two got recognized. The
> hal-info seems ok, but the event seems in-turn not to be registered...
>
> Thanks for help
>
> On Wed, Dec 2, 2009 at 12:35 PM, Mathieu Malaterre
> <mathieu.malaterre@gmail.com> wrote:
>> Hi there,
>>
>> *I am hitting this problem now :
>>
>> [ *118.586044] atkbd.c: Unknown key pressed (translated set 2, code
>> 0x88 on isa0060/serio0).
>> [ *118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>>
>>
>> *In the past I was able to fix it using hal-info from testing, but
>> today this is not working anymore. What do I need to get the special
>> WLAN key (Alt-F2 on DELL M6300) to work on a Debian/Lenny system ?
>>
>> dmesg output:
>> [ *118.586044] iwl4965: Radio Frequency Kill Switch is On:
>> [ *118.586044] Kill switch must be turned off for wireless networking to work.
>> [ *118.586044] atkbd.c: Unknown key pressed (translated set 2, code
>> 0x88 on isa0060/serio0).
>> [ *118.586044] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>> [ *118.716437] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *118.725402] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.020807] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.030904] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.301369] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.509042] CE: hpet increasing min_delta_ns to 15000 nsec
>> [ *119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.565446] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.734078] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *119.942087] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *120.090892] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>> [ *120.163248] iwl4965: WARNING: Requesting MAC access during RFKILL
>> wakes up NIC
>>
>>
>> Package:
>>
>> $ apt-cache policy hal hal-info
>> hal:
>> *Installed: 0.5.13-4
>> *Candidate: 0.5.13-4
>> *Version table:
>> * * 0.5.13-6 0
>> * * * *100 http://ftp.fr.debian.org unstable/main Packages
>> **** 0.5.13-4 0
>> * * * *200 http://ftp.fr.debian.org testing/main Packages
>> * * * *100 /var/lib/dpkg/status
>> * * 0.5.11-8 0
>> * * * *500 http://ftp.fr.debian.org lenny/main Packages
>> hal-info:
>> *Installed: 20091130-1
>> *Candidate: 20091130-1
>> *Version table:
>> **** 20091130-1 0
>> * * * *100 http://ftp.fr.debian.org unstable/main Packages
>> * * * *100 /var/lib/dpkg/status
>> * * 20090716-1 0
>> * * * *200 http://ftp.fr.debian.org testing/main Packages
>> * * 20080508+git20080601-1 0
>> * * * *500 http://ftp.fr.debian.org lenny/main Packages
>>
>>
>> The worst part is that I can see the DELL keycode:
>>
>> $ grep F2 /usr/share/hal/fdi/information/10freedesktop/30-keymap-dell.fdi
>> * * * * *<append key="input.keymap.data"
>> type="strlist">e008:wlan</append> <!-- Fn+F2 Turn On/Off Wireless -->
>>
>> Thanks again !
>> --
>> Mathieu
>>
>
>
>
> --
> Mathieu
>



--
Mathieu


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org