I decided to change from 686 to AMD64 architecture after all the buzz
the past few days about the virtues of using the AMD64 architecture.
After installing Lenny, I have no sound at all. (with 686, I had sound
from the install, no problem).
moe:~# cat /proc/asound/cards
--- no soundcards ---
moe:~# cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux moe 2.6.26-1-amd64 #1 SMP Mon Dec 15 17:25:36 UTC 2008 x86_64
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
moe:~# ls -l /dev/{snd,dsp}
ls: cannot access /dev/dsp: No such file or directory
/dev/snd:
total 0
crw-rw---- 1 root audio 116, 1 2009-01-10 07:28 seq
crw-rw---- 1 root audio 116, 33 2009-01-10 07:28 timer
I've done a good bit of searching in the archives, but as of yet I've
not found a solution.
Thanks in advance,
Mike
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-10-2009, 11:42 PM
"M. Lewis"
AMD64 No sound
M. Lewis wrote:
Lenny
KDE
I decided to change from 686 to AMD64 architecture after all the buzz
the past few days about the virtues of using the AMD64 architecture.
After installing Lenny, I have no sound at all. (with 686, I had sound
from the install, no problem).
moe:~# cat /proc/asound/cards
--- no soundcards ---
moe:~# cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux moe 2.6.26-1-amd64 #1 SMP Mon Dec 15 17:25:36 UTC 2008 x86_64
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
moe:~# ls -l /dev/{snd,dsp}
ls: cannot access /dev/dsp: No such file or directory
/dev/snd:
total 0
crw-rw---- 1 root audio 116, 1 2009-01-10 07:28 seq
crw-rw---- 1 root audio 116, 33 2009-01-10 07:28 timer
I've done a good bit of searching in the archives, but as of yet I've
not found a solution.
Thanks in advance,
Mike
Doing more digging, I find I also have this [1] problem (problem #1).
I'm not sure if the two issues are related at all. I have tried booting
with iommu=soft, still no sound.
To iterate is human; to recurse, divine. - Robert Heller
18:40:01 up 11 min, 2 users, load average: 0.12, 0.09, 0.08
Linux Registered User #241685 http://counter.li.org
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-11-2009, 07:33 AM
"M. Lewis"
AMD64 No sound
M. Lewis wrote:
M. Lewis wrote:
Lenny
KDE
I decided to change from 686 to AMD64 architecture after all the buzz
the past few days about the virtues of using the AMD64 architecture.
After installing Lenny, I have no sound at all. (with 686, I had sound
from the install, no problem).
moe:~# cat /proc/asound/cards
--- no soundcards ---
moe:~# cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux moe 2.6.26-1-amd64 #1 SMP Mon Dec 15 17:25:36 UTC 2008
x86_64
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
moe:~# ls -l /dev/{snd,dsp}
ls: cannot access /dev/dsp: No such file or directory
/dev/snd:
total 0
crw-rw---- 1 root audio 116, 1 2009-01-10 07:28 seq
crw-rw---- 1 root audio 116, 33 2009-01-10 07:28 timer
I've done a good bit of searching in the archives, but as of yet I've
not found a solution.
Thanks in advance,
Mike
Doing more digging, I find I also have this [1] problem (problem #1).
I'm not sure if the two issues are related at all. I have tried booting
with iommu=soft, still no sound.
I may be getting closer to the solution. I did get sound out of the
machine a few minutes ago. I found this entry in /var/log/messages when
the sound was working:
Jan 11 02:04:28 moe kernel: [ 6431.540366] ACPI: PCI Interrupt
0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Jan 11 02:06:39 moe kernel: [ 6578.403702] hda-intel: Invalid position
buffer, using LPIB read method instead.
After a reboot and trying to use the sound, I see these messages in
/var/log/messages:
So it would seem that my sound is not getting (for some strange reason)
an interrupt because it is disabled. Note, nothing was changed in the
BIOS during this reboot.
Thanks for any clues,
Mike
--
Don't diddle code to make it faster; find a better algorithm.
02:25:01 up 14 min, 1 user, load average: 0.00, 0.04, 0.06
Linux Registered User #241685 http://counter.li.org
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-12-2009, 10:54 AM
Bob
AMD64 No sound
M. Lewis wrote:
M. Lewis wrote:
M. Lewis wrote:
Lenny
KDE
I decided to change from 686 to AMD64 architecture after all the
buzz the past few days about the virtues of using the AMD64
architecture. After installing Lenny, I have no sound at all. (with
686, I had sound from the install, no problem).
moe:~# cat /proc/asound/cards
--- no soundcards ---
moe:~# cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux moe 2.6.26-1-amd64 #1 SMP Mon Dec 15 17:25:36 UTC 2008
x86_64
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
moe:~# ls -l /dev/{snd,dsp}
ls: cannot access /dev/dsp: No such file or directory
/dev/snd:
total 0
crw-rw---- 1 root audio 116, 1 2009-01-10 07:28 seq
crw-rw---- 1 root audio 116, 33 2009-01-10 07:28 timer
I've done a good bit of searching in the archives, but as of yet
I've not found a solution.
Thanks in advance,
Mike
Doing more digging, I find I also have this [1] problem (problem #1).
I'm not sure if the two issues are related at all. I have tried
booting with iommu=soft, still no sound.
I may be getting closer to the solution. I did get sound out of the
machine a few minutes ago. I found this entry in /var/log/messages
when the sound was working:
Jan 11 02:04:28 moe kernel: [ 6431.540366] ACPI: PCI Interrupt
0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Jan 11 02:06:39 moe kernel: [ 6578.403702] hda-intel: Invalid position
buffer, using LPIB read method instead.
After a reboot and trying to use the sound, I see these messages in
/var/log/messages:
So it would seem that my sound is not getting (for some strange
reason) an interrupt because it is disabled. Note, nothing was changed
in the BIOS during this reboot.
Thanks for any clues,
Mike
I had a recent update knacker my sound but in a different way.
You want to read the bit on snd-hda-intel in
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
try to identify your card and put a line a bit like this in
/etc/modprobe.d/alsa-base
options snd-hda-intel model=6stack-dig position_fix=1
I don't know how much tweaking the Debian team do to ALSA but I've found
the wiki a good place for help, particularly in getting digital output going
http://alsa.opensrc.org/index.php/Main_Page
Good luck, keep us posted.
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-12-2009, 02:27 PM
"M. Lewis"
AMD64 No sound
Bob wrote:
M. Lewis wrote:
M. Lewis wrote:
M. Lewis wrote:
Lenny
KDE
I decided to change from 686 to AMD64 architecture after all the
buzz the past few days about the virtues of using the AMD64
architecture. After installing Lenny, I have no sound at all. (with
686, I had sound from the install, no problem).
moe:~# cat /proc/asound/cards
--- no soundcards ---
moe:~# cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.16 emulation code)
Kernel: Linux moe 2.6.26-1-amd64 #1 SMP Mon Dec 15 17:25:36 UTC 2008
x86_64
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
moe:~# ls -l /dev/{snd,dsp}
ls: cannot access /dev/dsp: No such file or directory
/dev/snd:
total 0
crw-rw---- 1 root audio 116, 1 2009-01-10 07:28 seq
crw-rw---- 1 root audio 116, 33 2009-01-10 07:28 timer
I've done a good bit of searching in the archives, but as of yet
I've not found a solution.
Thanks in advance,
Mike
Doing more digging, I find I also have this [1] problem (problem #1).
I'm not sure if the two issues are related at all. I have tried
booting with iommu=soft, still no sound.
I may be getting closer to the solution. I did get sound out of the
machine a few minutes ago. I found this entry in /var/log/messages
when the sound was working:
Jan 11 02:04:28 moe kernel: [ 6431.540366] ACPI: PCI Interrupt
0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Jan 11 02:06:39 moe kernel: [ 6578.403702] hda-intel: Invalid position
buffer, using LPIB read method instead.
After a reboot and trying to use the sound, I see these messages in
/var/log/messages:
So it would seem that my sound is not getting (for some strange
reason) an interrupt because it is disabled. Note, nothing was changed
in the BIOS during this reboot.
Thanks for any clues,
Mike
I had a recent update knacker my sound but in a different way.
You want to read the bit on snd-hda-intel in
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
try to identify your card and put a line a bit like this in
/etc/modprobe.d/alsa-base
options snd-hda-intel model=6stack-dig position_fix=1
I don't know how much tweaking the Debian team do to ALSA but I've found
the wiki a good place for help, particularly in getting digital output
going
http://alsa.opensrc.org/index.php/Main_Page
Good luck, keep us posted.
Thanks Bob. Yes, I'm aware of the ALSA-Configuration.txt and have tried
several possibilities. I've also read quite a bit on the Alsa site.
Something I'm missing somewhere though. Sound is still eluding me.
Thanks,
Mike
--
UNIX is many things to many people, but it has never been everything
to anybody.
09:25:01 up 5:15, 1 user, load average: 0.07, 0.06, 0.02
Linux Registered User #241685 http://counter.li.org
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-13-2009, 05:08 AM
"Javier Barroso"
AMD64 No sound
Hello,
On Mon, Jan 12, 2009 at 12:54 PM, Bob <spam@homeurl.co.uk> wrote:
> M. Lewis wrote:
>>>>
>>>> I decided to change from 686 to AMD64 architecture after all the buzz
>>>> the past few days about the virtues of using the AMD64 architecture. After
>>>> installing Lenny, I have no sound at all. (with 686, I had sound from the
>>>> install, no problem).
>>>>
>>>> moe:~# lspci | grep -i audio
>>>> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
>
> You want to read the bit on snd-hda-intel in
> /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
> try to identify your card and put a line a bit like this in
> /etc/modprobe.d/alsa-base
> options snd-hda-intel model=6stack-dig position_fix=1
>From [1] your could probe another line in /etc/modprobe.d/alsa-base
options snd-hda-intel model=acer position_fix=1
In the last post they say "thanks", but I'm not sure if the sound worked again
Regards,
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
01-13-2009, 05:29 AM
"M. Lewis"
AMD64 No sound
Javier Barroso wrote:
Hello,
On Mon, Jan 12, 2009 at 12:54 PM, Bob <spam@homeurl.co.uk> wrote:
M. Lewis wrote:
I decided to change from 686 to AMD64 architecture after all the buzz
the past few days about the virtues of using the AMD64 architecture. After
installing Lenny, I have no sound at all. (with 686, I had sound from the
install, no problem).
You want to read the bit on snd-hda-intel in
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
try to identify your card and put a line a bit like this in
/etc/modprobe.d/alsa-base
options snd-hda-intel model=6stack-dig position_fix=1
From [1] your could probe another line in /etc/modprobe.d/alsa-base
You want to read the bit on snd-hda-intel in
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
try to identify your card and put a line a bit like this in
/etc/modprobe.d/alsa-base
options snd-hda-intel model=6stack-dig position_fix=1
>From [1] your could probe another line in /etc/modprobe.d/alsa-base
options snd-hda-intel model=acer position_fix=1
AMD64 No sound
