FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 12-13-2007, 02:38 PM
Marc Auslander
 
Default Latest kernel security update wont boot

I am running etch on a Dell with ide drives, using LILO

I just used aptitude to install the latest security update to the
2.6.18 kernel, 2.6.18.dfsg.1-13etch5

The install produced a message about the fact that it was updating the
running kernel and I should reboot right away - which I did.

Reboot failed with kernel panic which was something like:

VFS - cannot open root device "302" or block 302 not found (this is
approximate).

I tried root=/dev/hda2, and root=/dev/ide/bus0/target0/lun0/part1 -
neither worked.

I copied a backup of my old 2.6.18 kernel and initrd.img as another
kernel image and ran lilo, all from the rescue cd.

I booted the old system successfully. I then ran a reinstall of the
kernel under aptitude, but it still won't boot.

Any suggestions?

Have my devices been somehow renumbered here? If so, how do I figure
out what the new numbering is?

Any other possibilities?


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-13-2007, 04:38 PM
Graham
 
Default Latest kernel security update wont boot

On 13 Dec 2007 10:38:00 -0500
Marc Auslander <marcslists@gmail.com> wrote:

> I am running etch on a Dell with ide drives, using LILO
>
> I just used aptitude to install the latest security update to the
> 2.6.18 kernel, 2.6.18.dfsg.1-13etch5
>
> The install produced a message about the fact that it was updating the
> running kernel and I should reboot right away - which I did.
>
> Reboot failed with kernel panic which was something like:
>
> VFS - cannot open root device "302" or block 302 not found (this is
> approximate).
>
> I tried root=/dev/hda2, and root=/dev/ide/bus0/target0/lun0/part1 -
> neither worked.
>
> I copied a backup of my old 2.6.18 kernel and initrd.img as another
> kernel image and ran lilo, all from the rescue cd.
>
> I booted the old system successfully. I then ran a reinstall of the
> kernel under aptitude, but it still won't boot.
>
> Any suggestions?
>
> Have my devices been somehow renumbered here? If so, how do I figure
> out what the new numbering is?
>
> Any other possibilities?

Probably a stupid question, but still worth asking: when you saw the
message that you should reboot the machine after the new kernel is
installed, did you hit the tab key to highlight the "OK" at the bottom
of the message, then hit enter, or did you just reboot straight away
without doing so? There is still stuff to do with the kernel
installation after that message is displayed, so you should of hit the
"OK" instead of immediately rebooting. If you followed the procedure
correctly, then sorry if I've wasted your time, but thought it worth
asking.


Graham


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-13-2007, 06:36 PM
Marc Auslander
 
Default Latest kernel security update wont boot

Graham wrote:

On 13 Dec 2007 10:38:00 -0500
Marc Auslander <marcslists@gmail.com> wrote:


I am running etch on a Dell with ide drives, using LILO

I just used aptitude to install the latest security update to the
2.6.18 kernel, 2.6.18.dfsg.1-13etch5

The install produced a message about the fact that it was updating the
running kernel and I should reboot right away - which I did.

Reboot failed with kernel panic which was something like:

VFS - cannot open root device "302" or block 302 not found (this is
approximate).

I tried root=/dev/hda2, and root=/dev/ide/bus0/target0/lun0/part1 -
neither worked.

I copied a backup of my old 2.6.18 kernel and initrd.img as another
kernel image and ran lilo, all from the rescue cd.

I booted the old system successfully. I then ran a reinstall of the
kernel under aptitude, but it still won't boot.

Any suggestions?

Have my devices been somehow renumbered here? If so, how do I figure
out what the new numbering is?

Any other possibilities?


Probably a stupid question, but still worth asking: when you saw the
message that you should reboot the machine after the new kernel is
installed, did you hit the tab key to highlight the "OK" at the bottom
of the message, then hit enter, or did you just reboot straight away
without doing so? There is still stuff to do with the kernel
installation after that message is displayed, so you should of hit the
"OK" instead of immediately rebooting. If you followed the procedure
correctly, then sorry if I've wasted your time, but thought it worth
asking.


Graham


Not what I saw. I hit enter and then eventually returned to aptitude.
I was seeing a text interface, not a curses interface on the terminal.


Another fact - initrd.img is tiny. So something didn't get built.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-13-2007, 07:12 PM
Marc Auslander
 
Default Latest kernel security update wont boot

I tried again - I did in fact (ignore earlier post) see the OK and
clicked on it. initrd.img winds up being 89 bytes long. The output
of the configure follow. The only anomoly is the comment about a
missing link.

There is a /lib/modules/2.6.18-5-686, but it does not contain an entry
names source.

Done.
Unpacking replacement linux-image-2.6.18-5-686 ...
Setting up linux-image-2.6.18-5-686 (2.6.18.dfsg.1-13etch5) ...

Hmm. The package shipped with a symbolic link /lib/modules/2.6.18-5-686/source
However, I can not read the target: No such file or directory
Therefore, I am deleting /lib/modules/2.6.18-5-686/source

Running depmod.
Finding valid ramdisk creators.
Using mkinitramfs-kpkg to build the ramdisk.
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.18.dfsg.1-13etch5 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.18.dfsg.1-13etch5 was configured last, according to dpkg)
You already have a LILO configuration in /etc/lilo.conf
Running boot loader as requested
Testing lilo.conf ...
Testing successful.
Installing the partition boot sector...
Running /sbin/lilo ...
Installation successful.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-13-2007, 07:32 PM
Andrew Sackville-West
 
Default Latest kernel security update wont boot

On Thu, Dec 13, 2007 at 02:36:42PM -0500, Marc Auslander wrote:

>> Marc Auslander <marcslists@gmail.com> wrote:
>>
>>> I am running etch on a Dell with ide drives, using LILO
>>>
>>> I just used aptitude to install the latest security update to the
>>> 2.6.18 kernel, 2.6.18.dfsg.1-13etch5
>>>
>>> The install produced a message about the fact that it was updating the
>>> running kernel and I should reboot right away - which I did.
>>>
>>> Reboot failed with kernel panic which was something like:
>>>
>>> VFS - cannot open root device "302" or block 302 not found (this is
>>> approximate).
>
> Another fact - initrd.img is tiny. So something didn't get built.
>

missing some modules in initrd? try rebuilding it and see what
happens. look at mkinitrd or mkinitramfs (I don't remember which comes
with etch).

the command will be something like

mkinitramfs -o initrd.img-2.6.18-version-arch -k 2.6.18-version-arch

be sure to move the other one aside first. and since you're using
lilo, make sure you aer aware of what your symlinks are and so forth.

A
 
Old 12-13-2007, 08:22 PM
Marc Auslander
 
Default Latest kernel security update wont boot

On 12/13/2007 Andrew Sackville-West wrote:

the command will be something like

mkinitramfs -o initrd.img-2.6.18-version-arch -k 2.6.18-version-arch


be sure to move the other one aside first. and since you're using
lilo, make sure you aer aware of what your symlinks are and so forth.


I tried update-ramfs instead since mkinitramfs said to.

I wind up with this tiny initrd:

-rw-r--r-- 1 root root 89 Dec 13 16:17 initrd.img-2.6.18-5-686

after seeing output like:

(/boot)# update-initramfs -v -c -k 2.6.18-5-686
update-initramfs: Generating /boot/initrd.img-2.6.18-5-686
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/usb/core/usbcore.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/usb/host/ehci-hcd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/usb/host/ohci-hcd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/usb/host/uhci-hcd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/usb/input/usbhid.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/ide-core.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/scsi_mod.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/usb/storage/usb-storage.ko

Adding module /lib/modules/2.6.18-5-686/kernel/fs/mbcache.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/ext2/ext2.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/jbd/jbd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/ext3/ext3.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/isofs/isofs.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/jfs/jfs.ko
Adding module /lib/modules/2.6.18-5-686/kernel/net/sunrpc/sunrpc.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/nfs_common/nfs_acl.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/lockd/lockd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/nfs/nfs.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/reiserfs/reiserfs.ko
Adding module /lib/modules/2.6.18-5-686/kernel/fs/xfs/xfs.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/mii.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/3c59x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/8139cp.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/8139too.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/8390.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/b44.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/bnx2.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/defxx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/dl2k.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/e1000/e1000.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/e100.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/epic100.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/eql.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/fealnx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/forcedeth.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/hp100.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/base/firmware_class.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/net/myri10ge/myri10ge.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/natsemi.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/ne2k-pci.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/netconsole.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/ns83820.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/pcnet32.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/r8169.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/s2io.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/sis900.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/skge.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/slhc.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/starfire.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/sundance.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/sungem_phy.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/sungem.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/sunhme.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tg3.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tlan.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/de2104x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/de4x5.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/dmfe.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/tulip.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/winbond-840.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/net/tulip/xircom_cb.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/via-rhine.ko
Adding module /lib/modules/2.6.18-5-686/kernel/lib/crc-ccitt.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/via-velocity.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/net/yellowfin.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/cdrom/cdrom.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/ide-cd.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/ide-disk.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/ide-generic.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/aec62xx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/alim15x3.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/amd74xx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/atiixp.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/cmd64x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/cs5520.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/cs5530.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/cy82c693.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/generic.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/hpt34x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/hpt366.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/it821x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/jmicron.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/ns87415.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/opti621.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/pdc202xx_new.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/pdc202xx_old.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/piix.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/rz1000.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/sc1200.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/serverworks.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/siimage.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/sis5513.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/slc90e66.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/triflex.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/trm290.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ide/pci/via82cxxx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/3w-9xxx.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/3w-xxxx.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/aacraid/aacraid.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/advansys.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/libata.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/ahci.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/scsi_transport_spi.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/aic7xxx/aic79xx.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/aic7xxx/aic7xxx.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/arcmsr/arcmsr.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/ata_piix.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/atp870u.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/BusLogic.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/block/cciss.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/ch.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/block/cpqarray.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/block/DAC960.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/dc395x.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/dmx3191d.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/dpt_i2o.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/eata.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/fdomain.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/gdth.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/hptiop.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/initio.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/ipr.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/ips.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/scsi_transport_fc.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/lpfc/lpfc.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/megaraid.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/megaraid/megaraid_mm.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/megaraid/megaraid_mbox.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/megaraid/megaraid_sas.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/fusion/mptbase.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/fusion/mptscsih.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/fusion/mptfc.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/scsi_transport_sas.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/fusion/mptsas.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/fusion/mptspi.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/nsp32.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/osst.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/qla1280.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/qla2xxx/qla2xxx.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/qlogicfas408.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_mv.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_nv.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_promise.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_qstor.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_sil.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_sil24.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_sis.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_svw.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_sx4.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_uli.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_via.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sata_vsc.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/scsi_transport_iscsi.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/sd_mod.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/scsi/tmscsim.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/i2o/i2o_core.ko
Adding module
/lib/modules/2.6.18-5-686/kernel/drivers/message/i2o/i2o_block.ko

Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ieee1394/ieee1394.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ieee1394/ohci1394.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/ieee1394/sbp2.ko
Adding binary /usr/share/initramfs-tools/init
Adding binary /etc/initramfs-tools/initramfs.conf
Adding binary /etc/initramfs-tools/conf.d/resume
Adding binary /bin/busybox
Adding library /lib/libcrypt.so.1
Adding library /lib/libm.so.6
Adding library /lib/libc.so.6
Adding library /lib/ld-linux.so.2
Adding binary /sbin/modprobe
Adding binary /sbin/depmod
Adding binary /sbin/rmmod
Calling hook kernelextras
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/video/vgastate.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/video/vga16fb.ko
Calling hook thermal
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/acpi/fan.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/acpi/processor.ko
Adding module /lib/modules/2.6.18-5-686/kernel/drivers/acpi/thermal.ko
Calling hook udev
Adding binary /sbin/udevd
Adding library /lib/libselinux.so.1
Adding library /lib/libdl.so.2
Adding library /lib/libsepol.so.1
Adding binary /sbin/udevtrigger
Adding binary /sbin/udevsettle
Adding binary /lib/udev/ide.agent
Adding binary /lib/udev/ata_id
Adding binary /lib/udev/cdrom_id
Adding binary /lib/udev/edd_id
Adding binary /lib/udev/path_id
Adding binary /lib/udev/scsi_id
Adding binary /lib/udev/usb_id
Adding binary /lib/udev/vol_id
Adding library /lib/libvolume_id.so.0
Building cpio /boot/initrd.img-2.6.18-5-686 initramfs


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-13-2007, 09:09 PM
Andrew Sackville-West
 
Default Latest kernel security update wont boot

On Thu, Dec 13, 2007 at 04:22:10PM -0500, Marc Auslander wrote:
> On 12/13/2007 Andrew Sackville-West wrote:
>> the command will be something like
>>
>> mkinitramfs -o initrd.img-2.6.18-version-arch -k 2.6.18-version-arch
>> be sure to move the other one aside first. and since you're using
>> lilo, make sure you aer aware of what your symlinks are and so forth.
>
> I tried update-ramfs instead since mkinitramfs said to.
>
> I wind up with this tiny initrd:
>
> -rw-r--r-- 1 root root 89 Dec 13 16:17 initrd.img-2.6.18-5-686

that's not right... but then you knew that.

do you possibly have a full disk somewhere?

I don't know where that filesysten gets built, but a full disk might
lead to problems.


A
 

Thread Tools




All times are GMT. The time now is 07:55 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org