FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 11-06-2008, 11:27 AM
"Zaki Akhmad"
 
Default X-Window on HP ProLiant ML110

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, Nov 6, 2008 at 1:37 AM, Florian Kulzer wrote:
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: http://getfiregpg.org

iEUEARECAAYFAkkS4pEACgkQT4k8JfIMt5dAZgCfVMoruAh/3sFtRWAPp3eiQEKF
OTMAmMoXOF5F5jhfQHfvUDNYLESGd2Y=
=hdHU
-----END PGP SIGNATURE-----

>
> It should still be possible to specify you desired resolution(s) in
> the Screen section of xorg.conf like this:
>
> Section "Screen"
> Identifier "Default Screen"
> Monitor "Configured Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1280x1024" "1024x768" "800x600"
> EndSubSection
> EndSection
>
> If you specify more than one resolution, like in my example above, then
> you can switch between them by holding down CTRL and ALT and using the
> plus or minus key on the numerical keypad. If you have an LCD screen
> with a fixed number of pixels then you should use exactly the matching
> resolution. If your graphics card cannot support your desired resolution
> then you might have to decrease the Depth from 24 to 16.

Yup, I think my VGA card only support 16 colour depth. And I am using LCD.

> If you want to be on the safe side then you can furthermore look up the
> acceptable horizontal and vertical frequency ranges for your monitor (do
> not just copy the values that I give in the example below!) and add them
> to the monitor section like this:
>
> Section "Monitor"
> Identifier "Configured Monitor"
> HorizSync 31-80
> VertRefresh 56-75
> DisplaySize 335 270
> EndSection
>
> HorizSync is in kHz, VertRefresh is in Hz. The DisplaySize is width and
> height in millimeters; it is not absolutely necessary that you specify
> it, but it can help to avoid inconsistencies with the sizes of fonts.

Ok, Florian. Thank's a lot for your hint. I'll let others know the
result later when I'm done testing with new xorg.conf configuration.

--
Zaki Akhmad


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 11-06-2008, 11:32 AM
"Krishna Chandra Prajapati"
 
Default X-Window on HP ProLiant ML110

Hi,

I also faced the same issue. Then i tried dpkg-reconfigure xserver-xorg. But it didn't worked.
So, i have copied the file /etc/X11/xorg.conf* It works,

On Thu, Nov 6, 2008 at 5:57 PM, Zaki Akhmad <zakiakhmad@gmail.com> wrote:

-----BEGIN PGP SIGNED MESSAGE-----

Hash: SHA1



On Thu, Nov 6, 2008 at 1:37 AM, Florian Kulzer *wrote:

-----BEGIN PGP SIGNATURE-----

Version: GnuPG v1.4.9 (GNU/Linux)

Comment: http://getfiregpg.org



iEUEARECAAYFAkkS4pEACgkQT4k8JfIMt5dAZgCfVMoruAh/3sFtRWAPp3eiQEKF

OTMAmMoXOF5F5jhfQHfvUDNYLESGd2Y=

=hdHU

-----END PGP SIGNATURE-----



>

> It should still be possible to specify you desired resolution(s) in

> the Screen section of xorg.conf like this:

>

> Section "Screen"

> * * *Identifier * * *"Default Screen"

> * * *Monitor * * * * "Configured Monitor"

> * * *DefaultDepth * *24

> * * *SubSection "Display"

> * * * * * * *Depth * * * 24

> * * * * * * *Modes * * * "1280x1024" "1024x768" "800x600"

> * * *EndSubSection

> EndSection

>

> If you specify more than one resolution, like in my example above, then

> you can switch between them by holding down CTRL and ALT and using the

> plus or minus key on the numerical keypad. If you have an LCD screen

> with a fixed number of pixels then you should use exactly the matching

> resolution. If your graphics card cannot support your desired resolution

> then you might have to decrease the Depth from 24 to 16.



Yup, I think my VGA card only support 16 colour depth. And I am using LCD.



> If you want to be on the safe side then you can furthermore look up the

> acceptable horizontal and vertical frequency ranges for your monitor (do

> not just copy the values that I give in the example below!) and add them

> to the monitor section like this:

>

> Section "Monitor"

> * * * *Identifier * * *"Configured Monitor"

> * * * *HorizSync * * * 31-80

> * * * *VertRefresh * * 56-75

> * * * *DisplaySize * * 335 270

> EndSection

>

> HorizSync is in kHz, VertRefresh is in Hz. The DisplaySize is width and

> height in millimeters; it is not absolutely necessary that you specify

> it, but it can help to avoid inconsistencies with the sizes of fonts.



Ok, Florian. Thank's a lot for your hint. I'll let others know the

result later when I'm done testing with new xorg.conf configuration.



--

Zaki Akhmad





--

To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org

with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org





--
Krishna Chandra Prajapati
MySQL DBA,
Ed Ventures e-Learning Pvt.Ltd.
1-8-303/48/15, Sindhi Colony
P.G.Road, Secunderabad.
Pin Code: 500003
Office Number: 040-66489771

Mob: 9912924044
URL: ed-ventures-online.com
Email-id: prajapatikc@gmail.com
 
Old 11-06-2008, 11:37 AM
"Zaki Akhmad"
 
Default X-Window on HP ProLiant ML110

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1



On Thu, Nov 6, 2008 at 7:32 PM, Krishna Chandra Prajapati wrote:
> Hi,
>
> I also faced the same issue. Then i tried dpkg-reconfigure xserver-xorg. But
> it didn't worked.
> So, i have copied the file /etc/X11/xorg.conf It works,

Hi Krishna, did you use HP ProLian ML110 too?
You copy based on from Florian's suggestion?

- --
Zaki Akhmad


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: http://getfiregpg.org

iEYEARECAAYFAkkS5QEACgkQT4k8JfIMt5c8AACfSIoUC+BZsc UabBQt1f8lY05Z
JLQAoI9DdWG2/if79yWoYY9iAFmod+l4
=wC43
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 11-07-2008, 06:16 AM
"Zaki Akhmad"
 
Default X-Window on HP ProLiant ML110

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


On Thu, Nov 6, 2008 at 1:37 AM, Florian Kulzer wrote:
>
> This option has been removed from the debconf dialog, which can lead to
> problems if the correct resolution settings cannot be detected from the
> monitor and/or the video driver does not support RandR. (See Teemu
> Likonen's earlier mail for a link to a bug report.)
>
> It should still be possible to specify you desired resolution(s) in
> the Screen section of xorg.conf like this:
>
> Section "Screen"
> Identifier "Default Screen"
> Monitor "Configured Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1280x1024" "1024x768" "800x600"
> EndSubSection
> EndSection

It still won't work :-(
I've added that configuration, and changed to 16 depth color configuration.

I put part of /var/log/Xorg.0.log[1]

- --
Zaki Akhmad

[1] /var/log/Xorg.0.log
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(--) MGA(0): Chipset: "mgag200 SE A PCI"
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(**) MGA(0): Option "UseFBDev" "true"
(II) MGA(0): Disabling MTRR support.
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(**) MGA(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.0.2
ABI class: X.Org Video Driver, version 2.0
(--) MGA(0): Linear framebuffer at 0xEE000000
(==) MGA(0): MMIO registers at 0xEF800000
(--) MGA(0): Pseudo-DMA transfer window at 0xEF000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07A80
(--) MGA(0): VideoRAM: 1664 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(EE) MGA(0): mmap mmio: Invalid argument
(EE) MGA(0): Unable to map MMIO.
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 230 MHz
(II) MGA(0): Configured Monitor: Using hsync range of 31.00-80.00 kHz
(II) MGA(0): Configured Monitor: Using vrefresh range of 56.00-75.00 Hz
(II) MGA(0): Clock range: 17.75 to 230.00 MHz
II) MGA(0): Not using default mode "640x350" (unknown reason)
(II) MGA(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x400" (unknown reason)
(II) MGA(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "720x400" (unknown reason)
(II) MGA(0): Not using default mode "360x200" (unknown reason)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "320x240" (unknown reason)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "400x300" (unknown reason)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "400x300" (unknown reason)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "400x300" (unknown reason)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "400x300" (unknown reason)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "400x300" (unknown reason)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "512x384" (unknown reason)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "512x384" (unknown reason)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "512x384" (unknown reason)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "512x384" (unknown reason)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "512x384" (unknown reason)
(II) MGA(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) MGA(0): Not using default mode "576x432" (unknown reason)
(II) MGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x480" (unknown reason)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x512" (unknown reason)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x512" (unknown reason)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x512" (unknown reason)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (unknown reason)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (unknown reason)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (unknown reason)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (unknown reason)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (unknown reason)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (unknown reason)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (unknown reason)
(II) MGA(0): Not using default mode "832x624" (unknown reason)
(II) MGA(0): Not using default mode "416x312" (unknown reason)
(II) MGA(0): Not using default mode "1280x768" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x384" (unknown reason)
(II) MGA(0): Not using default mode "1280x800" (insufficient memory for mode)
(II) MGA(0): Not using default mode "640x400" (unknown reason)
(II) MGA(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) MGA(0): Not using default mode "576x384" (unknown reason)
(II) MGA(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) MGA(0): Not using default mode "576x432" (unknown reason)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "700x525" (unknown reason)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "700x525" (unknown reason)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "700x525" (unknown reason)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "700x525" (unknown reason)
(II) MGA(0): Not using default mode "1440x900" (insufficient memory for mode)
(II) MGA(0): Not using default mode "720x450" (unknown reason)
(II) MGA(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x512" (unknown reason)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (unknown reason)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x600" (unknown reason)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x600" (unknown reason)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (unknown reason)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (unknown reason)
(WW) MGA(0): Mode pool is empty
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
(II) MGA(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768
772 776 792 -hsync -vsync -csync (59.9 kHz)
(**) MGA(0): Display dimensions: (335, 270) mm
(**) MGA(0): DPI set to (77, 72)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xef000000 - 0xef7fffff (0x800000) MX[b]
[1] 0 0 0xef800000 - 0xef803fff (0x4000) MX[b]
[2] 0 0 0xee000000 - 0xeeffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xef900000 - 0xef90ffff (0x10000) MX[b]
[8] -1 0 0xefc00400 - 0xefc007ff (0x400) MX[b]
[9] -1 0 0xefc00000 - 0xefc003ff (0x400) MX[b]
[10] -1 0 0xef000000 - 0xef7fffff (0x800000) MX[b](B)
[11] -1 0 0xef800000 - 0xef803fff (0x4000) MX[b](B)
[12] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00003090 - 0x0000309f (0x10) IX[b]
[19] -1 0 0x000030b8 - 0x000030bb (0x4) IX[b]
[20] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[b]
[21] -1 0 0x000030bc - 0x000030bf (0x4) IX[b]
[22] -1 0 0x000030c8 - 0x000030cf (0x8) IX[b]
[23] -1 0 0x00003080 - 0x0000308f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00003060 - 0x0000307f (0x20) IX[b]
[29] -1 0 0x00003040 - 0x0000305f (0x20) IX[b]
[30] -1 0 0x00003020 - 0x0000303f (0x20) IX[b]
[31] -1 0 0x00003000 - 0x0000301f (0x20) IX[b]
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(EE) MGA(0): mmap mmio: Invalid argument
(EE) MGA(0): Unable to map MMIO.

Fatal server error:
AddScreen/ScreenInit failed for driver 0


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: http://getfiregpg.org

iEYEARECAAYFAkkT6z4ACgkQT4k8JfIMt5cOZwCfYPsWZlURk3 gAPetRZpPbtdr9
1UgAn26cvqD9mCjrEYr8rwWJmjJAooPJ
=POu/
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 11-07-2008, 06:29 AM
"Zaki Akhmad"
 
Default X-Window on HP ProLiant ML110

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Problems solved now :-)
I use vesa driver

Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection

- -za,


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: http://getfiregpg.org

iEYEARECAAYFAkkT7lQACgkQT4k8JfIMt5durgCffzBfa7SpZ5 9Ju+S6Ui6Mb7IR
PbwAoIWNVEUq0vqvhaG3xAvVa4Agq33q
=rM9P
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 07:09 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org