FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 10-26-2008, 03:27 AM
Serena Cantor
 
Default (solved) how to save alsa configuration

I add snd-sb16 to /etc/modules, it now can detect my card automatically. Thanks!

To Nigel Henry:
I found 2 lines suggested by you in /etc/modprobe.d/sound

alias snd-card-0 snd-sb16
options snd-sb16 isapnp=0

So I needn't enter manually. Thanks anyway!




--- On Sat, 10/25/08, Nigel Henry <cave.dnb2m97pp@aliceadsl.fr> wrote:

> From: Nigel Henry <cave.dnb2m97pp@aliceadsl.fr>
> Subject: Re: how to save alsa configuration
> To: debian-user@lists.debian.org
> Date: Saturday, October 25, 2008, 8:18 PM
> Update below.
>
> On Saturday 25 October 2008 23:06, Nigel Henry wrote:
> > On Saturday 25 October 2008 21:53, Serena Cantor
> wrote:
> > > I enter the command "alsactl store" and
> reboot, it doesn't work!
> >
> > Hi Serena. I have an SB16 ISA card on the machine
> I'm posting from (FC2),
> > but it's only set up for one of the distros on the
> machine as a second
> > soundcard on the Fedora Core 3 install. The other
> distros use an Ensoniq
> > (ens1371) soundcard. I'll reboot into FC3, and see
> if there is anything
> > in /etc/modprobe.conf that might help you. If there is
> you could add the
> > lines to /etc/modprobe.d/alsa-base, which may resolve
> your problem.
> >
> > I'm not sure how it may work with Etch, as I
> don't have it installed on
> > this machine.
> >
> > I'll post back later.
> >
> > Nigel.
>
> Hi Again. I rebooted into FC3, which has both the Ensoniq,
> and SB16 soundcards
> configured. Both cards work fine after the reboot.
>
> The output from cat /proc/asound/cards is below. The only
> problem that I had
> when I added the SB16 card to this machine, and then ran
> alsaconf, is that it
> insisted on being card0. The Ensoniq card had been card0,
> but after running
> alsaconf for adding the SB16, the SB16 was set as card0,
> and the Ensoniq card
> became card1. Not a big problem, and I did try to change
> it, but with no
> success,
>
> [djmons@localhost ~]$ cat /proc/asound/cards
> 0 [S16 ]: SB16 - Sound Blaster 16
> Sound Blaster 16 at 0x220, irq 5, dma
> 1&5
> 1 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
> Ensoniq AudioPCI ENS1371 at 0x1080,
> irq 11
> [djmons@localhost ~]$
>
> Moving on to /etc/modprobe.conf , there are 2 lines that
> alsaconf has set for
> the SB16 card, and its worth adding these to your
> /etc/modprobe.d/alsa-base
> file, as it may fix your problem. See below.
>
> alias eth0 3c59x
> remove snd-ens1371 { /usr/sbin/alsactl store >/dev/null
> 2>&1
> || : ; }; /sbin/modprobe -r --ignore-remove snd-ens1371
> alias usb-controller uhci-hcd
>
> #alias snd-card-0 snd-ens1371
> #alias snd-card-1 snd-sb16
> #options snd-ens1371 index=0
> #options snd-sb16 index=1
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 1.0.9rc1 ---
> alias snd-card-0 snd-sb16
> options snd-sb16 isapnp=0
> # --- END: Generated by ALSACONF, do not edit. ---
>
> The 2 lines that you need to add to the
> /etc/modprobe.d/alsa-base file are,
> alias snd-card-0 snd-sb16
> options snd-sb16 isapnp=0
>
> As you can see from my /etc/modprobe.conf file above, these
> were created when
> I ran Alsaconf for the SB16 soundcard.
>
> As I said. I don't have Etch installed on the machine
> with the SB16 card, so
> the suggestion above, may, or may not work.
>
> Nigel.
>
>
> --
> To UNSUBSCRIBE, email to
> debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 01:42 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org