Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Laptop (http://www.linux-archive.org/debian-laptop/)
-   -   wifi problem after starting laptop with empty usb stick (http://www.linux-archive.org/debian-laptop/712763-wifi-problem-after-starting-laptop-empty-usb-stick.html)

Fernando Gadea 01-28-2013 06:49 AM

wifi problem after starting laptop with empty usb stick
 
Hi, I just started my netbook with an empty usb stick and now I cannot see wireless conections around. Debian squeeze is the os, and Im sending lspci, dmesg and lsmod in a txt file.
Please, I really nead help. Im backpacking in Argentina and it`s not very common to find a cyber cafe around, but the gas stations have wifi.I will connect tomorrow whenever Im able to.Thank you,
Fernando
[ 0.296357] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.296932] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.296937] TCP reno registered
[ 0.297109] NET: Registered protocol family 1
[ 0.297152] pci 0000:00:01.0: Boot video device
[ 0.392108] Unpacking initramfs...
[ 0.728765] Freeing initrd memory: 9178k freed
[ 0.734324] Simple Boot Flag at 0x44 set to 0x1
[ 0.734876] audit: initializing netlink socket (disabled)
[ 0.734895] type=2000 audit(1359349792.731:1): initialized
[ 0.740580] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.743400] VFS: Disk quotas dquot_6.5.2
[ 0.743538] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.743711] msgmni has been set to 15211
[ 0.744661] alg: No test for stdrng (krng)
[ 0.744803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.744810] io scheduler noop registered
[ 0.744813] io scheduler anticipatory registered
[ 0.744816] io scheduler deadline registered
[ 0.744913] io scheduler cfq registered (default)
[ 0.745095] alloc irq_desc for 24 on node -1
[ 0.745099] alloc kstat_irqs on node -1
[ 0.745117] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.745127] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.745257] alloc irq_desc for 25 on node -1
[ 0.745260] alloc kstat_irqs on node -1
[ 0.745271] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.745280] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.747906] Linux agpgart interface v0.103
[ 0.748097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.748690] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.748781] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.757689] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.757702] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.757826] mice: PS/2 mouse device common for all mice
[ 0.757940] rtc_cmos 00:05: RTC can wake from S4
[ 0.757999] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.758045] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.758063] cpuidle: using governor ladder
[ 0.758066] cpuidle: using governor menu
[ 0.758074] No iBFT detected.
[ 0.758584] TCP cubic registered
[ 0.758783] NET: Registered protocol family 10
[ 0.760034] Mobile IPv6
[ 0.760040] NET: Registered protocol family 17
[ 0.760199] PM: Resume from disk failed.
[ 0.760217] registered taskstats version 1
[ 0.760846] rtc_cmos 00:05: setting system clock to 2013-01-28 05:09:53 UTC (1359349793)
[ 0.760969] Initalizing network drop monitor service
[ 0.761058] Freeing unused kernel memory: 592k freed
[ 0.761389] Write protecting the kernel read-only data: 4240k
[ 0.762182] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.796198] udev[56]: starting version 164
[ 1.012375] usbcore: registered new interface driver usbfs
[ 1.012610] usbcore: registered new interface driver hub
[ 1.012863] usbcore: registered new device driver usb
[ 1.015682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.015740] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.015809] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.015815] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.015859] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.015895] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.015941] ehci_hcd 0000:00:12.2: debug port 1
[ 1.015979] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024c000
[ 1.036854] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.036900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.036904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.036909] usb usb1: Product: EHCI Host Controller
[ 1.036912] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.036916] usb usb1: SerialNumber: 0000:00:12.2
[ 1.037129] usb usb1: configuration #1 chosen from 1 choice
[ 1.037233] hub 1-0:1.0: USB hub found
[ 1.037256] hub 1-0:1.0: 5 ports detected
[ 1.037421] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.037476] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.037482] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.037498] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.037516] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.037551] ehci_hcd 0000:00:13.2: debug port 1
[ 1.037573] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a000
[ 1.040445] SCSI subsystem initialized
[ 1.044746] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.044806] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.044880] r8169 0000:01:00.0: setting latency timer to 64
[ 1.044925] alloc irq_desc for 26 on node -1
[ 1.044929] alloc kstat_irqs on node -1
[ 1.044950] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 1.046256] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xffffc90000c6c000, 68:b5:99:d4:60:24, XID 0c200000 IRQ 26
[ 1.048107] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.048183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.048188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.048192] usb usb2: Product: EHCI Host Controller
[ 1.048196] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.048199] usb usb2: SerialNumber: 0000:00:13.2
[ 1.048359] usb usb2: configuration #1 chosen from 1 choice
[ 1.048421] hub 2-0:1.0: USB hub found
[ 1.048437] hub 2-0:1.0: 5 ports detected
[ 1.048660] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.048727] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 1.048733] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.048750] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.048768] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.048801] ehci_hcd 0000:00:16.2: debug port 1
[ 1.048824] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0248000
[ 1.053827] ACPI Warning for \_TZ_.THRM._AL0: Return Package has no elements (empty) (20090903/nspredef-433)
[ 1.053840] ACPI: [Package] has zero elements (ffff880202d74b80)
[ 1.053938] ACPI: Invalid active0 threshold
[ 1.060635] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.060726] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.060730] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060734] usb usb3: Product: EHCI Host Controller
[ 1.060738] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.060741] usb usb3: SerialNumber: 0000:00:16.2
[ 1.061422] usb usb3: configuration #1 chosen from 1 choice
[ 1.061574] hub 3-0:1.0: USB hub found
[ 1.061593] hub 3-0:1.0: 4 ports detected
[ 1.068702] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.068719] ACPI: Thermal Zone [THRM] (53 C)
[ 1.071321] libata version 3.00 loaded.
[ 1.077038] ahci 0000:00:11.0: version 3.0
[ 1.077105] alloc irq_desc for 19 on node -1
[ 1.077109] alloc kstat_irqs on node -1
[ 1.077124] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.077561] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.077569] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.077782] scsi0 : ahci
[ 1.077986] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 19
[ 1.114571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.114661] alloc irq_desc for 18 on node -1
[ 1.114666] alloc kstat_irqs on node -1
[ 1.114680] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.115123] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.115130] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.115154] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.115227] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf024d000
[ 1.172288] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.172296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172300] usb usb4: Product: OHCI Host Controller
[ 1.172304] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.172307] usb usb4: SerialNumber: 0000:00:12.0
[ 1.172483] usb usb4: configuration #1 chosen from 1 choice
[ 1.172553] hub 4-0:1.0: USB hub found
[ 1.172619] hub 4-0:1.0: 5 ports detected
[ 1.172734] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.172791] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.172797] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.172813] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.172848] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf024b000
[ 1.232790] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.232797] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232802] usb usb5: Product: OHCI Host Controller
[ 1.232805] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.232809] usb usb5: SerialNumber: 0000:00:13.0
[ 1.232985] usb usb5: configuration #1 chosen from 1 choice
[ 1.233038] hub 5-0:1.0: USB hub found
[ 1.233104] hub 5-0:1.0: 5 ports detected
[ 1.233225] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.233283] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 1.233289] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.233304] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 1.233338] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0249000
[ 1.292304] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.292311] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292315] usb usb6: Product: OHCI Host Controller
[ 1.292319] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.292322] usb usb6: SerialNumber: 0000:00:16.0
[ 1.292489] usb usb6: configuration #1 chosen from 1 choice
[ 1.292564] hub 6-0:1.0: USB hub found
[ 1.292629] hub 6-0:1.0: 4 ports detected
[ 1.364293] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.560245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.561654] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OCH0A, max UDMA/100
[ 1.561667] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.563582] ata1.00: configured for UDMA/100
[ 1.576704] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O PQ: 0 ANSI: 5
[ 1.586760] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.587409] sd 0:0:0:0: [sda] Write Protect is off
[ 1.587418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.587464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588821] sda: sda1 sda2 sda3
[ 1.638684] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.147079] PM: Starting manual resume from disk
[ 2.147088] PM: Resume from partition 8:2
[ 2.147091] PM: Checking hibernation image.
[ 2.147506] PM: Error -22 checking image file
[ 2.147515] PM: Resume from disk failed.
[ 2.233118] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.400009] usb 2-1: New USB device found, idVendor=04f2, idProduct=b236
[ 2.400022] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.400030] usb 2-1: Product: CNFA033
[ 2.400037] usb 2-1: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.400044] usb 2-1: SerialNumber: 0x0001
[ 2.400215] usb 2-1: configuration #1 chosen from 1 choice
[ 2.528290] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 2.674628] usb 2-2: New USB device found, idVendor=0bda, idProduct=0138
[ 2.674640] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.674649] usb 2-2: Product: USB2.0-CRW
[ 2.674655] usb 2-2: Manufacturer: Generic
[ 2.674661] usb 2-2: SerialNumber: 20090516388200000
[ 2.674828] usb 2-2: configuration #1 chosen from 1 choice
[ 4.014897] udev[367]: starting version 164
[ 4.282770] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.282783] ACPI: Power Button [PWRB]
[ 4.282925] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 4.284697] ACPI: Lid Switch [LID]
[ 4.291988] processor LNXCPU:00: registered as cooling_device0
[ 4.292174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.292185] ACPI: Power Button [PWRF]
[ 4.300278] processor LNXCPU:01: registered as cooling_device1
[ 4.443698] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.443705] Disabling lock debugging due to kernel taint
[ 4.630438] [fglrx] Maximum main memory to use for locked dma buffers: 7380 MBytes.
[ 4.630544] [fglrx] vendor: 1002 device: 9802 count: 1
[ 4.632056] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[ 4.632084] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.632092] pci 0000:00:01.0: setting latency timer to 64
[ 4.632960] ACPI: AC Adapter [AC] (off-line)
[ 4.633821] [fglrx] Kernel PAT support is enabled
[ 4.633865] [fglrx] module loaded - fglrx 8.93.4 [Dec 5 2011] with 1 minors
[ 4.710300] ACPI: Battery Slot [BAT0] (battery present)
[ 4.768770] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.894024] ACPI: WMI: Mapper loaded
[ 5.663233] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400
[ 5.723509] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.919966] register rt2860
[ 5.920064] rt2860 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.920176] rt2860 0000:02:00.0: setting latency timer to 64
[ 5.920566]
[ 5.920568]
[ 5.920569] === pAd = ffffc90005788000, size = 580536 ===
[ 5.920571]
[ 5.920624] <-- RTMPAllocTxRxRingMemory, Status=0
[ 5.920782] <-- RTMPAllocAdapterBlock, Status=0
[ 5.920787] pAd->CSRBaseAddress =0xffffc90007500000, csr_addr=0xffffc90007500000!
[ 5.935577] Initializing USB Mass Storage driver...
[ 5.935898] scsi1 : SCSI emulation for USB Mass Storage devices
[ 5.936060] usbcore: registered new interface driver usb-storage
[ 5.936064] USB Mass Storage support registered.
[ 5.937148] usb-storage: device found at 3
[ 5.937151] usb-storage: waiting for device to settle before scanning
[ 5.997275] Linux video capture interface: v2.00
[ 6.001917] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.014058] uvcvideo: Found UVC 1.00 device CNFA033 (04f2:b236)
[ 6.043561] acpi device:01: registered as cooling_device2
[ 6.044259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.044384] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.044587] input: CNFA033 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
[ 6.044726] usbcore: registered new interface driver uvcvideo
[ 6.044732] USB Video Class driver (v0.1.0)
[ 6.288907] lis3lv02d: laptop model unknown, using default axes configuration
[ 6.563184] lis3lv02d: unknown sensor type 0x33
[ 6.563298] lis3lv02d: probe of HPQ0004:00 failed with error -22
[ 6.563338] lis3lv02d driver loaded.
[ 6.625021] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.625101] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 6.710216] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.710352] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 6.801575] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.809226] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 6.809403] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 7.570117] Adding 8787532k swap on /dev/sda2. Priority:-1 extents:1 across:8787532k
[ 8.025565] loop: module loaded
[ 8.437866] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 9.509345] fuse init (API version 7.13)
[ 10.940947] usb-storage: device scan complete
[ 10.944629] scsi 1:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 10.955857] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 11.630419] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 13.791814] r8169 0000:01:00.0: firmware: requesting rtl_nic/rtl8168e-2.fw
[ 13.996281] r8169 0000:01:00.0: eth0: link down
[ 13.998133] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.001572] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 14.004896] RX DESC ffff880037814000 size = 2048
[ 14.005699] RTMP_TimerListAdd: add timer obj ffffc900057d9410!
[ 14.005707] RTMP_TimerListAdd: add timer obj ffffc900057d9480!
[ 14.005711] RTMP_TimerListAdd: add timer obj ffffc900057d94f0!
[ 14.005715] RTMP_TimerListAdd: add timer obj ffffc900057d93a0!
[ 14.005720] RTMP_TimerListAdd: add timer obj ffffc900057d9250!
[ 14.005723] RTMP_TimerListAdd: add timer obj ffffc900057d92c0!
[ 14.005727] RTMP_TimerListAdd: add timer obj ffffc900057a37d0!
[ 14.005731] RTMP_TimerListAdd: add timer obj ffffc900057a3840!
[ 14.005734] RTMP_TimerListAdd: add timer obj ffffc900057a36e8!
[ 14.005737] RTMP_TimerListAdd: add timer obj ffffc90005792990!
[ 14.005741] RTMP_TimerListAdd: add timer obj ffffc90005792a08!
[ 14.005746] RTMP_TimerListAdd: add timer obj ffffc900057a3608!
[ 14.005751] RTMP_TimerListAdd: add timer obj ffffc900057a38d0!
[ 14.040289] Key1Str is Invalid key length(0) or Type(0)
[ 14.040321] Key2Str is Invalid key length(0) or Type(0)
[ 14.040351] Key3Str is Invalid key length(0) or Type(0)
[ 14.040382] Key4Str is Invalid key length(0) or Type(0)
[ 14.040921] 1. Phy Mode = 9
[ 14.040924] 2. Phy Mode = 9
[ 14.040928] NVM is Efuse and its size =2d[2d0-2fc]
[ 14.041616] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 14.042016] 3. Phy Mode = 9
[ 14.044853] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 14.044928] MCS Set = ff 00 00 00 01
[ 14.044931] <==== rt28xx_init, Status=0
[ 14.045050] 0x1300 = 00064300
[ 14.045067] AUX_CTRL = 0x 4c02
[ 14.045071] Read AUX_CTRL = 0x4c02
[ 14.045075] Write AUX_CTRL = 0x5c02
[ 14.045078] OSC_CTRL = 0x3ff11
[ 14.045158] ====> rt30xx Read PowerLevelMode = 0x3.
[ 14.045161] ====> rt30xx F Write 0x83 Command = 0x3.
[ 16.323756] Bluetooth: Core ver 2.15
[ 16.323852] NET: Registered protocol family 31
[ 16.323855] Bluetooth: HCI device and connection manager initialized
[ 16.323861] Bluetooth: HCI socket layer initialized
[ 16.528283] Bluetooth: L2CAP ver 2.14
[ 16.528288] Bluetooth: L2CAP socket layer initialized
[ 16.550097] Bluetooth: RFCOMM TTY layer initialized
[ 16.550105] Bluetooth: RFCOMM socket layer initialized
[ 16.550109] Bluetooth: RFCOMM ver 1.11
[ 17.001287] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.001292] Bluetooth: BNEP filters: protocol multicast
[ 17.108828] lp: driver loaded but no devices found
[ 17.127091] Bridge firewalling registered
[ 17.362251] ppdev: user-space parallel port driver
[ 17.852723] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.852729] Bluetooth: SCO socket layer initialized
[ 20.429136] powernow-k8: Found 1 AMD E-350 Processor processors (2 cpu cores) (version 2.20.00)
[ 20.429219] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 20.429222] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 20.429226] powernow-k8: 2 : pstate 2 (800 MHz)
[ 20.429230] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[ 20.429621] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[ 20.638238] alloc irq_desc for 27 on node -1
[ 20.638245] alloc kstat_irqs on node -1
[ 20.638264] fglrx_pci 0000:00:01.0: irq 27 for MSI/MSI-X
[ 20.639150] [fglrx] Firegl kernel thread PID: 1887
[ 20.639284] [fglrx] Firegl kernel thread PID: 1888
[ 20.639412] [fglrx] Firegl kernel thread PID: 1889
[ 20.639592] [fglrx] IRQ 27 Enabled
[ 20.957530] [fglrx] Gart USWC size:1280 M.
[ 20.957542] [fglrx] Gart cacheable size:508 M.
[ 20.957558] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 20.957567] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 20.957575] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 24.240232] ra0: no IPv6 routers present
[ 35.234102] CPU0 attaching NULL sched-domain.
[ 35.234122] CPU1 attaching NULL sched-domain.
[ 35.256302] CPU0 attaching sched-domain:
[ 35.256315] domain 0: span 0-1 level MC
[ 35.256324] groups: group ffff88000860fbf0 cpus 0 group ffff88000868fbf0 cpus 1
[ 35.256345] domain 1: span 0-1 level CPU
[ 35.256352] groups: group ffff88000860fd00 cpus 0-1 (cpu_power = 2048)
[ 35.256372] CPU1 attaching sched-domain:
[ 35.256379] domain 0: span 0-1 level MC
[ 35.256385] groups: group ffff88000868fbf0 cpus 1 group ffff88000860fbf0 cpus 0
[ 35.256401] domain 1: span 0-1 level CPU
[ 35.256408] groups: group ffff88000860fd00 cpus 0-1 (cpu_power = 2048)
[ 144.175881] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2313.792326] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2313.927652] usb 1-2: New USB device found, idVendor=04e8, idProduct=1f0a
[ 2313.927679] usb 1-2: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[ 2313.927688] usb 1-2: Product: Samsung S2 Portable
[ 2313.927694] usb 1-2: Manufacturer: JMicron
[ 2313.927700] usb 1-2: SerialNumber: 00000011E09310500217
[ 2313.928014] usb 1-2: configuration #1 chosen from 1 choice
[ 2313.930111] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2313.930475] usb-storage: device found at 2
[ 2313.930484] usb-storage: waiting for device to settle before scanning
[ 2318.929747] usb-storage: device scan complete
[ 2318.972782] scsi 2:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
[ 2318.979740] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2318.980922] sd 2:0:0:0: [sdc] Write Protect is off
[ 2318.980936] sd 2:0:0:0: [sdc] Mode Sense: 28 00 00 00
[ 2318.980944] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 2318.983727] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 2318.984649] sdc: sdc1 sdc2
[ 2319.015055] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 2319.015073] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2322.755713] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[ 2322.889420] EXT4-fs (sdc1): recovery complete
[ 2322.987070] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 3944.007329] usb 1-2: USB disconnect, address 2
root@ulises:/home/nan# lsmod
Module Size Used by
powernow_k8 10978 0
cpufreq_powersave 902 0
cpufreq_stats 2740 0
cpufreq_conservative 5162 0
cpufreq_userspace 1992 0
sco 7225 2
parport_pc 18855 0
ppdev 5030 0
bridge 39646 0
stp 1440 1 bridge
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
bnep 9427 2
rfcomm 29629 0
l2cap 24752 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 2 bluetooth
binfmt_misc 6431 1
uinput 6376 1
fuse 50924 1
loop 11799 0
snd_hda_codec_idt 42513 1
snd_hda_codec_atihdmi 2251 1
snd_hda_intel 20035 3
snd_hda_codec 54244 3 snd_hda_codec_idt,snd_hda_codec_atihdmi,snd_hda_in tel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
hp_accel 11056 0
snd_seq 42881 0
lis3lv02d 5173 1 hp_accel
snd_timer 15598 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
snd 46526 14 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
input_polldev 1967 1 lis3lv02d
video 17445 0
uvcvideo 52127 0
i2c_piix4 8328 0
videodev 30041 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8474 1 videodev
soundcore 4598 1 snd
joydev 8459 0
led_class 2433 1 hp_accel
output 1692 1 video
usb_storage 40217 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
i2c_core 15819 2 i2c_piix4,videodev
rt5390sta 1227241 1
wmi 4323 0
psmouse 49937 0
evdev 7352 23
pcspkr 1699 0
serio_raw 3752 0
battery 4998 0
ac 2192 0
fglrx 3053321 75
button 4650 1 fglrx
processor 29935 3 powernow_k8
ext4 288382 2
mbcache 5050 1 ext4
jbd2 67079 1 ext4
crc16 1319 2 l2cap,ext4
sd_mod 29937 4
crc_t10dif 1276 1 sd_mod
ohci_hcd 19343 0
ahci 32870 3
libata 133776 1 ahci
thermal 11674 0
r8169 36840 0
mii 3210 1 r8169
scsi_mod 126725 3 usb_storage,sd_mod,libata
ehci_hcd 32097 0
thermal_sys 11942 3 video,processor,thermal
usbcore 123122 5 uvcvideo,usb_storage,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
root@ulises:/home/nan#

Florian Reitmeir 01-28-2013 03:54 PM

wifi problem after starting laptop with empty usb stick
 
Hi,

Fernando Gadea wrote:

I just started my netbook with an empty usb stick and now I cannot see
wireless conections around.
Debian squeeze is the os, and Im sending lspci, dmesg and lsmod in a
txt file.
Please, I really nead help. Im backpacking in Argentina and it`s not
very common to find a cyber cafe around, but the gas stations have wifi.
I will connect tomorrow whenever Im able to.


more helpful would have been:

- did it ever work?
- did you check the wifi switch?
- output of lspci
- output of lsusb
- output of iwconfig
- output of "iwlist scan"


--
Florian Reitmeir
E-Mail: florian@reitmeir.org
Tel: +43 650 2661660


--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 5106AD63.6000302@reitmeir.org">http://lists.debian.org/5106AD63.6000302@reitmeir.org

Fernando Gadea 01-28-2013 04:17 PM

wifi problem after starting laptop with empty usb stick
 
I*didnt check the switch and Im ashamed. it was off. Really sorry of having wasted your time, please forgive me.Thank you a lot.


2013/1/28 Florian Reitmeir <florian@reitmeir.org>

Hi,



Fernando Gadea wrote:


I just started my netbook with an empty usb stick and now I cannot see

wireless conections around.

Debian squeeze is the os, and Im sending lspci, dmesg and lsmod in a

txt file.

Please, I really nead help. Im backpacking in Argentina and it`s not

very common to find a cyber cafe around, but the gas stations have wifi.

I will connect tomorrow whenever Im able to.




more helpful would have been:



- did it ever work?

- did you check the wifi switch?

- output of lspci

- output of lsusb

- output of iwconfig

- output of "iwlist scan"





--

Florian Reitmeir

E-Mail: florian@reitmeir.org

Tel: +43 650 2661660





--

To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org

with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: http://lists.debian.org/5106AD63.6000302@reitmeir.org


All times are GMT. The time now is 05:11 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.