Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2 linux distro on my External USB portable seagate 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP pavilion dv 2762 tx with config:-
Both these distro works with all other older laptops Like HP, Dell studio* 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it works fine . i use this cd as a live media but when i tried same Ubuntu 10.10 on live usb it gives blank screen or error which i mentioned below.
To check that my iso file damaged or my download has been corrupted or not, i tried different distros with different desktop enviornment like Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't know what is this some kind of bug or lack of support with dell chipset (hardware). if live cd boots well then i think there is nohardware compatibility issue with linux. I think this is lack of usb support because may be Linux has no support until now for latest motherboards or hardware architects.
These are the errors i got with different distros. i am not able to figure out what's going on bcz i'm rookie in Linux programming. But if anyone can do it, plz help me i haven't run my linux from previous 1 and half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have write the full error i got bcz may be it helps somebody to find what's going on)
BOOT FAILED !
The debian live image failed to boot. Please file a bug against the 'live-initramfs' package or email the debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting with debug command line parameter will greatly increase it's verbosity which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any update regarding problem soon i'll release it's second version. lolz!!!*
Regards
Navdeep Singh
07-08-2011, 10:15 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2 linux distro on my External USB portable seagate 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP pavilion dv 2762 tx with config:-
Both these distro works with all other older laptops Like HP, Dell studio* 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it works fine . i use this cd as a live media but when i tried same Ubuntu 10.10 on live usb it gives blank screen or error which i mentioned below.
To check that my iso file damaged or my download has been corrupted or not, i tried different distros with different desktop enviornment like Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't know what is this some kind of bug or lack of support with dell chipset (hardware). if live cd boots well then i think there is nohardware compatibility issue with linux. I think this is lack of usb support because may be Linux has no support until now for latest motherboards or hardware architects.
These are the errors i got with different distros. i am not able to figure out what's going on bcz i'm rookie in Linux programming. But if anyone can do it, plz help me i haven't run my linux from previous 1 and half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have write the full error i got bcz may be it helps somebody to find what's going on)
BOOT FAILED !
The debian live image failed to boot. Please file a bug against the 'live-initramfs' package or email the debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting with debug command line parameter will greatly increase it's verbosity which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any update regarding problem soon i'll release it's second version. lolz!!!*
Regards
Navdeep Singh
--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
07-08-2011, 10:15 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2 linux distro on my External USB portable seagate 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP pavilion dv 2762 tx with config:-
Both these distro works with all other older laptops Like HP, Dell studio* 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it works fine . i use this cd as a live media but when i tried same Ubuntu 10.10 on live usb it gives blank screen or error which i mentioned below.
To check that my iso file damaged or my download has been corrupted or not, i tried different distros with different desktop enviornment like Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't know what is this some kind of bug or lack of support with dell chipset (hardware). if live cd boots well then i think there is nohardware compatibility issue with linux. I think this is lack of usb support because may be Linux has no support until now for latest motherboards or hardware architects.
These are the errors i got with different distros. i am not able to figure out what's going on bcz i'm rookie in Linux programming. But if anyone can do it, plz help me i haven't run my linux from previous 1 and half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have write the full error i got bcz may be it helps somebody to find what's going on)
BOOT FAILED !
The debian live image failed to boot. Please file a bug against the 'live-initramfs' package or email the debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting with debug command line parameter will greatly increase it's verbosity which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any update regarding problem soon i'll release it's second version. lolz!!!*
Regards
Navdeep Singh
--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
07-08-2011, 10:19 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2 linux distro on my External USB portable seagate 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP pavilion dv 2762 tx with config:-
Both these distro works with all other older laptops Like HP, Dell studio* 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it works fine . i use this cd as a live media but when i tried same Ubuntu 10.10 on live usb it gives blank screen or error which i mentioned below.
To check that my iso file damaged or my download has been corrupted or not, i tried different distros with different desktop enviornment like Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't know what is this some kind of bug or lack of support with dell chipset (hardware). if live cd boots well then i think there is nohardware compatibility issue with linux. I think this is lack of usb support because may be Linux has no support until now for latest motherboards or hardware architects.
These are the errors i got with different distros. i am not able to figure out what's going on bcz i'm rookie in Linux programming. But if anyone can do it, plz help me i haven't run my linux from previous 1 and half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have write the full error i got bcz may be it helps somebody to find what's going on)
BOOT FAILED !
The debian live image failed to boot. Please file a bug against the 'live-initramfs' package or email the debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting with debug command line parameter will greatly increase it's verbosity which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any update regarding problem soon i'll release it's second version. lolz!!!*
Regards
Navdeep Singh
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
07-08-2011, 10:19 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2 linux distro on my External USB portable seagate 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP pavilion dv 2762 tx with config:-
Both these distro works with all other older laptops Like HP, Dell studio* 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it works fine . i use this cd as a live media but when i tried same Ubuntu 10.10 on live usb it gives blank screen or error which i mentioned below.
To check that my iso file damaged or my download has been corrupted or not, i tried different distros with different desktop enviornment like Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't know what is this some kind of bug or lack of support with dell chipset (hardware). if live cd boots well then i think there is nohardware compatibility issue with linux. I think this is lack of usb support because may be Linux has no support until now for latest motherboards or hardware architects.
These are the errors i got with different distros. i am not able to figure out what's going on bcz i'm rookie in Linux programming. But if anyone can do it, plz help me i haven't run my linux from previous 1 and half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have write the full error i got bcz may be it helps somebody to find what's going on)
BOOT FAILED !
The debian live image failed to boot. Please file a bug against the 'live-initramfs' package or email the debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting with debug command line parameter will greatly increase it's verbosity which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any update regarding problem soon i'll release it's second version. lolz!!!*
Regards
Navdeep Singh
--
devel mailing list
devel@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
07-08-2011, 10:26 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2
linux distro on my External USB portable seagate 500 GB hardisk fedora
15 & Ubuntu 11.04. i have installed these distro by using HP
pavilion dv 2762 tx with config:-
Both
these distro works with all other older laptops Like HP, Dell studio* 1
yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check
my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it
works fine . i use this cd as a live media but when i tried same Ubuntu
10.10 on live usb it gives blank screen or error which i mentioned
below.
To check that my iso file damaged or my download has been corrupted or
not, i tried different distros with different desktop enviornment like
Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu
10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't
know what is this some kind of bug or lack of support with dell chipset
(hardware). if live cd boots well then i think there is nohardware
compatibility issue with linux. I think this is lack of usb support
because may be Linux has no support until now for latest motherboards or
hardware architects.
These are the errors i got with different distros. i am not able to
figure out what's going on bcz i'm rookie in Linux programming. But if
anyone can do it, plz help me i haven't run my linux from previous 1 and
half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have
write the full error i got bcz may be it helps somebody to find what's
going on)
BOOT FAILED !
The debian live image failed to boot.
Please file a bug against the 'live-initramfs' package or email the
debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting
with debug command line parameter will greatly increase it's verbosity
which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any
update regarding problem soon i'll release it's second version. lolz!!!
Regards
Navdeep Singh
--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
07-08-2011, 10:29 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2
linux distro on my External USB portable seagate 500 GB hardisk fedora
15 & Ubuntu 11.04. i have installed these distro by using HP
pavilion dv 2762 tx with config:-
Both
these distro works with all other older laptops Like HP, Dell studio* 1
yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check
my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it
works fine . i use this cd as a live media but when i tried same Ubuntu
10.10 on live usb it gives blank screen or error which i mentioned
below.
To check that my iso file damaged or my download has been corrupted or
not, i tried different distros with different desktop enviornment like
Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu
10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't
know what is this some kind of bug or lack of support with dell chipset
(hardware). if live cd boots well then i think there is nohardware
compatibility issue with linux. I think this is lack of usb support
because may be Linux has no support until now for latest motherboards or
hardware architects.
These are the errors i got with different distros. i am not able to
figure out what's going on bcz i'm rookie in Linux programming. But if
anyone can do it, plz help me i haven't run my linux from previous 1 and
half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have
write the full error i got bcz may be it helps somebody to find what's
going on)
BOOT FAILED !
The debian live image failed to boot.
Please file a bug against the 'live-initramfs' package or email the
debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting
with debug command line parameter will greatly increase it's verbosity
which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any
update regarding problem soon i'll release it's second version. lolz!!!
Regards
Navdeep Singh
07-08-2011, 10:32 PM
Navdeep Singh Sidhu
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
I have Dell Xps 15 with config:-
8 Gb RAM
2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus Techonology
720 GB hardisk
Motherboard Dell XPS system L502X
Intel centrino 6230 Network Card with BT 3.0
I have installed 2
linux distro on my External USB portable seagate 500 GB hardisk fedora
15 & Ubuntu 11.04. i have installed these distro by using HP
pavilion dv 2762 tx with config:-
Both
these distro works with all other older laptops Like HP, Dell studio* 1
yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
To check
my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it
works fine . i use this cd as a live media but when i tried same Ubuntu
10.10 on live usb it gives blank screen or error which i mentioned
below.
To check that my iso file damaged or my download has been corrupted or
not, i tried different distros with different desktop enviornment like
Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu
10.04, ubuntu 11.04. slackware,eduboss each with avail flavors.
But all i have tried gives almost same error with each distro. i don't
know what is this some kind of bug or lack of support with dell chipset
(hardware). if live cd boots well then i think there is nohardware
compatibility issue with linux. I think this is lack of usb support
because may be Linux has no support until now for latest motherboards or
hardware architects.
These are the errors i got with different distros. i am not able to
figure out what's going on bcz i'm rookie in Linux programming. But if
anyone can do it, plz help me i haven't run my linux from previous 1 and
half month and i'm a linux addicted.
starting from Fedora 15 gnome(almost same for kde except starting numbers)
error:-
[** 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 LXDE
[** 2.514402] nonveau 0000:01:00.0:invalid ROM contents
[** 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table invalid
[** 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
[** 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
Fedora 15 XCFE
[** 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
[** 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED
Dropping to debug shell.
sh.can't acess tty:job control off
dracut:/#
EDUBOSS (Debian derivative) (I apologize but i have
write the full error i got bcz may be it helps somebody to find what's
going on)
BOOT FAILED !
The debian live image failed to boot.
Please file a bug against the 'live-initramfs' package or email the
debian Live mailing list at <debian-live@lists.debian.org> make sure to note the exact version, name and distribution of the image you were attempt to boot.
The file /live.log contains same debugging information but booting
with debug command line parameter will greatly increase it's verbosity
which is extremely useful when diagnosing issues.
live-initramfs will start a shell.
The error message was: Unable to find a medium containing a live file system.
Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash)
Enter 'help' for a list of built in commands.
<bin/sh:can't access tty:job control turned off (initramfs)-*
Ubuntu 11.04 Gnome
Black screen nothing.
Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it is ubuntu 10.04 based distro)
GLIB_________________________(some kind of error i could note bcz it stays for few seconds)
stdin:error0
/init:line7:can't open /dev/sr0:no medium found
/init:line7:can't open /dev/sr0:no medium found
same error repeating
I also tried to check disc for error option but same error as above .
Slackware
Bcz it's command line it has direct option of installation no live media.
I have created live usb using unetbootin latest version.* if i get any
update regarding problem soon i'll release it's second version. lolz!!!
Regards
Navdeep Singh
--
devel mailing list
devel@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
07-10-2011, 02:48 PM
James McKenzie
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
On 7/8/11 3:19 PM, Navdeep Singh Sidhu wrote:
>
> I have Dell Xps 15 with config:-
> 8 Gb RAM
> 2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz
> Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus
> Techonology
> 720 GB hardisk
> Motherboard Dell XPS system L502X
> Intel centrino 6230 Network Card with BT 3.0
>
> I have installed 2 linux distro on my External USB portable seagate
> 500 GB hardisk fedora 15 & Ubuntu 11.04. i have installed these distro
> by using HP pavilion dv 2762 tx with config:-
>
> Core2duo 1.83Ghz
> 2Gb ram
> nvidia geforce 9600m graphics card
>
> Both these distro works with all other older laptops Like HP, Dell
> studio 1 yr old config , Compaq 5 yr old, but not on my Dell XPS 15.
> To check my laptops hardware compatibility i used a Ubuntu 10.10 live
> Cd. it works fine . i use this cd as a live media but when i tried
> same Ubuntu 10.10 on live usb it gives blank screen or error which i
> mentioned below.
> To check that my iso file damaged or my download has been corrupted or
> not, i tried different distros with different desktop enviornment like
> Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04,
> ubuntu 11.04. slackware,eduboss each with avail flavors.
> But all i have tried gives almost same error with each distro. i don't
> know what is this some kind of bug or lack of support with dell
> chipset (hardware). if live cd boots well then i think there is
> nohardware compatibility issue with linux. I think this is lack of usb
> support because may be Linux has no support until now for latest
> motherboards or hardware architects.
>
> These are the errors i got with different distros. i am not able to
> figure out what's going on bcz i'm rookie in Linux programming. But if
> anyone can do it, plz help me i haven't run my linux from previous 1
> and half month and i'm a linux addicted.
> starting from Fedora 15 gnome(almost same for kde except starting numbers)
>
> error:-
> [ 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
> [ 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
>
> Dropping to debug shell.
> sh.can't acess tty:job control off
> dracut:/#
>
>
> Fedora 15 LXDE
>
> [ 2.514402] nonveau 0000:01:00.0:invalid ROM contents
> [ 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table
> invalid
> [ 2.639331] [drm] nonveau 0000:01:00.0:0xd518:12cwr fail: -6
> [ 2.75332] [drm] nonveau 0000:01:00.0:PGRAPH:unsupported
> chipset,please report!
> [ 2.753646] [drm] nonveau 0000:01:00.0:PGRAPH:unknown config:2/0/0/0,1
> [ 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d
>
>
> [ 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
> [ 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
>
> Dropping to debug shell.
> sh.can't acess tty:job control off
> dracut:/#
>
>
> Fedora 15 XCFE
>
> [ 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
> [ 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL
> FAILED
What kind and model of video card is installed in the system you are
creating the boot USB from and what is in the Dell? Looks like a video
mismatch AND a video card NOT supported by the open source ATI video driver.
James McKenzie
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Need Support For Hardware & Live Usb Issue + Bugs version 0.1
