FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-30-2008, 11:17 AM
Shai Berger
 
Default Bug#483664: linux-image-2.6.25-2-686: sound only works when one virtual X console in use

Package: linux-image-2.6.25-2-686
Version: 2.6.25-4
Severity: normal


Yesterday I upgraded the kernel from 2.6.24 to 2.6.25 (I was waiting
for the nVidia kernel source fix). Since then, sound stops working
as soon as a second user logs in.

All users use virtual consoles -- the machine is a desktop. The problem
arises when there are two graphical users (i.e. X servers on vt7 and vt8).
When the problem starts, there is no sound on either session.

Sound did work when there was an X session on vt7 and a text session
on vt1.

When I went back to 2.6.24, I had to run alsaconf fixed sound. Then
I came back again to 2.6.25, only to have the problem repeat. Running
alsaconf yet again seems to have fixed it.

-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 15:38:35 UTC 2008

** Command line:
root=/dev/sda1 ro

** Tainted: P (1)

** Kernel log:
[ 1.352098] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
[ 1.496103] ahci 0000:00:1f.2: version 3.0
[ 1.496103] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.552178] firewire_core: created device fw0: GUID 0090270001c9c70a, S400
[ 1.512135] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.512196] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
[ 1.512247] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.512502] scsi2 : ahci
[ 1.512626] scsi3 : ahci
[ 1.516156] scsi4 : ahci
[ 1.516272] scsi5 : ahci
[ 1.516374] scsi6 : ahci
[ 1.516483] scsi7 : ahci
[ 1.516600] ata3: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225100 irq 217
[ 1.516656] ata4: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225180 irq 217
[ 1.516712] ata5: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225200 irq 217
[ 1.516768] ata6: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225280 irq 217
[ 1.516824] ata7: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225300 irq 217
[ 1.516880] ata8: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225380 irq 217
[ 1.416104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592119] ata3.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[ 1.592119] ata3.00: 488397168 sectors, multi 0: LBA48
[ 1.592119] ata3.00: configured for UDMA/133
[ 1.456104] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.504107] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.544109] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.592114] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.616121] ata7.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66, ATAPI AN
[ 1.616411] ata7.00: configured for UDMA/66
[ 1.636115] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.528105] scsi 2:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[ 1.624121] scsi 6:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5
[ 1.379904] Uniform Multi-Platform E-IDE driver
[ 1.379950] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.632584] Driver 'sd' needs updating - please use bus_type methods
[ 1.632688] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 1.632745] sd 2:0:0:0: [sda] Write Protect is off
[ 1.632790] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.632808] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.632904] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 1.632960] sd 2:0:0:0: [sda] Write Protect is off
[ 1.633005] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.633023] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.633112] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 1.648123] sda1 sda2 < sda5 sda6 >
[ 1.648123] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.552107] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.552111] Uniform CD-ROM driver Revision: 3.20
[ 1.552193] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.402324] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.402398] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 1.470376] PM: Starting manual resume from disk
[ 1.743559] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.743610] EXT3-fs: write access will be enabled during recovery.
[ 1.740115] kjournald starting. Commit interval 5 seconds
[ 1.880142] EXT3-fs: recovery complete.
[ 1.880142] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.297865] Linux agpgart interface v0.103
[ 2.717770] input: Power Button (FF) as /class/input/input1
[ 2.763808] ACPI: Power Button (FF) [PWRF]
[ 2.763921] input: Sleep Button (CM) as /class/input/input2
[ 2.801148] Real Time Clock Driver v1.12ac
[ 2.801814] ACPI: Sleep Button (CM) [SLPB]
[ 2.836884] input: PC Speaker as /class/input/input3
[ 2.880206] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 2.880206] iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
[ 2.880206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.018787] ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 21 (level, low) -> IRQ 21
[ 3.165559] input: PS2++ Logitech Wheel Mouse as /class/input/input4
[ 3.203904] parport_pc 00:07: reported by Plug and Play ACPI
[ 3.204024] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 3.209355] parport0: Printer, Xerox Phaser 3121
[ 3.293040] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 3.293145] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 3.888270] Adding 497972k swap on /dev/sda6. Priority:-1 extents:1 across:497972k
[ 3.932361] EXT3 FS on sda1, internal journal
[ 4.048281] loop: module loaded
[ 4.104535] device-mapper: uevent: version 1.0.3
[ 4.104840] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.931519] kjournald starting. Commit interval 5 seconds
[ 4.236293] EXT3 FS on sda5, internal journal
[ 4.236293] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.693440] NET: Registered protocol family 10
[ 4.693943] lo: Disabled Privacy Extensions
[ 4.694379] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.168756] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 5.168758] eth0: 10/100 speed: disabling TSO
[ 5.168902] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.405366] ACPI: WMI: Mapper loaded
[ 7.177356] lp0: using parport0 (interrupt-driven).
[ 7.189672] ppdev: user-space parallel port driver
[ 7.860534] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 8.932606] eth0: no IPv6 routers present
[ 9.179938] nvidia: module license 'NVIDIA' taints kernel.
[ 9.432172] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.432184] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 9.432282] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 584.428285] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 676.903865] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 676.903891] PCI: Setting latency timer of device 0000:00:1b.0 to 64

** Loaded modules:
Module Size Used by
snd_hda_intel 310008 2
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 3780 0
snd_seq_oss 28544 0
snd_seq_midi 8064 0
snd_rawmidi 22528 1 snd_seq_midi
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21320 2 snd_pcm,snd_seq
snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 48772 13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
soundcore 7488 1 snd
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
nvidia 7815872 44
ppdev 8676 0
lp 11012 0
autofs4 20708 0
ac 4448 0
video 19728 0
output 3712 1 video
battery 8448 0
wmi 7880 0
sbs 8544 0
container 4736 0
sbshc 6784 1 sbs
acpi_cpufreq 9228 0
cpufreq_stats 5216 0
cpufreq_ondemand 8428 4
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 3812 0
cpufreq_conservative 7432 0
cpufreq_powersave 1856 0
ipv6 241956 20
dm_snapshot 17444 0
dm_mirror 25316 0
dm_mod 55656 2 dm_snapshot,dm_mirror
firewire_sbp2 15956 0
loop 16708 0
i2c_i801 9520 0
parport_pc 25860 1
parport 33868 3 ppdev,lp,parport_pc
i2c_core 22548 2 nvidia,i2c_i801
psmouse 35920 0
iTCO_wdt 11204 0
pcspkr 3136 0
serio_raw 6532 0
button 8240 0
intel_agp 25084 0
agpgart 31720 2 nvidia,intel_agp
evdev 11328 3
ext3 120264 2
jbd 43444 1 ext3
mbcache 8260 1 ext3
sg 33140 0
sr_mod 16804 0
sd_mod 26072 4
cdrom 31872 1 sr_mod
ide_pci_generic 4228 0 [permanent]
ide_core 100312 1 ide_pci_generic
ata_generic 8004 0
firewire_ohci 20836 0
firewire_core 35680 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
ahci 27336 3
pata_marvell 6912 0
libata 142032 3 ata_generic,ahci,pata_marvell
scsi_mod 138508 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 32620 0
dock 10448 1 libata
uhci_hcd 22352 0
usbcore 130032 3 ehci_hcd,uhci_hcd
e1000e 85156 0
thermal 19100 0
processor 39660 2 acpi_cpufreq,thermal
fan 5636 0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-92ffffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 93226100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Device [8086:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 216
Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 93224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 93225c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Intel Corporation Device [8086:2504]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 93220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: 93300000-933fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 93100000-931fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: 93400000-934fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: 93500000-935fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: 93600000-936fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 93225800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Memory behind bridge: 93000000-930fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at 3108 [size=8]
Region 1: I/O ports at 3114 [size=4]
Region 2: I/O ports at 3100 [size=8]
Region 3: I/O ports at 3110 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at 93225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 93226000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8500 GT [10de:0421] (rev a1)
Subsystem: Giga-byte Technology Device [1458:3445]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 93100000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: pata_marvell

07:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 93004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 93000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci





-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 15:38:35 UTC 2008

** Command line:
root=/dev/sda1 ro

** Tainted: P (1)

** Kernel log:
[ 1.304087] ata2: DUMMY
[ 1.416527] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 1.288086] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.352098] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
[ 1.496103] ahci 0000:00:1f.2: version 3.0
[ 1.496103] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.552178] firewire_core: created device fw0: GUID 0090270001c9c70a, S400
[ 1.512135] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.512196] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
[ 1.512247] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.512502] scsi2 : ahci
[ 1.512626] scsi3 : ahci
[ 1.516156] scsi4 : ahci
[ 1.516272] scsi5 : ahci
[ 1.516374] scsi6 : ahci
[ 1.516483] scsi7 : ahci
[ 1.516600] ata3: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225100 irq 217
[ 1.516656] ata4: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225180 irq 217
[ 1.516712] ata5: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225200 irq 217
[ 1.516768] ata6: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225280 irq 217
[ 1.516824] ata7: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225300 irq 217
[ 1.516880] ata8: SATA max UDMA/133 abar m2048@0x93225000 port 0x93225380 irq 217
[ 1.416104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592119] ata3.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[ 1.592119] ata3.00: 488397168 sectors, multi 0: LBA48
[ 1.592119] ata3.00: configured for UDMA/133
[ 1.456104] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.504107] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.544109] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.592114] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.616121] ata7.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66, ATAPI AN
[ 1.616411] ata7.00: configured for UDMA/66
[ 1.636115] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.528105] scsi 2:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[ 1.624121] scsi 6:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5
[ 1.379904] Uniform Multi-Platform E-IDE driver
[ 1.379950] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.632584] Driver 'sd' needs updating - please use bus_type methods
[ 1.632688] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 1.632745] sd 2:0:0:0: [sda] Write Protect is off
[ 1.632790] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.632808] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.632904] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 1.632960] sd 2:0:0:0: [sda] Write Protect is off
[ 1.633005] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.633023] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.633112] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 1.648123] sda1 sda2 < sda5 sda6 >
[ 1.648123] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.552107] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.552111] Uniform CD-ROM driver Revision: 3.20
[ 1.552193] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.402324] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.402398] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 1.470376] PM: Starting manual resume from disk
[ 1.743559] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.743610] EXT3-fs: write access will be enabled during recovery.
[ 1.740115] kjournald starting. Commit interval 5 seconds
[ 1.880142] EXT3-fs: recovery complete.
[ 1.880142] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.297865] Linux agpgart interface v0.103
[ 2.717770] input: Power Button (FF) as /class/input/input1
[ 2.763808] ACPI: Power Button (FF) [PWRF]
[ 2.763921] input: Sleep Button (CM) as /class/input/input2
[ 2.801148] Real Time Clock Driver v1.12ac
[ 2.801814] ACPI: Sleep Button (CM) [SLPB]
[ 2.836884] input: PC Speaker as /class/input/input3
[ 2.880206] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 2.880206] iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
[ 2.880206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.018787] ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 21 (level, low) -> IRQ 21
[ 3.165559] input: PS2++ Logitech Wheel Mouse as /class/input/input4
[ 3.203904] parport_pc 00:07: reported by Plug and Play ACPI
[ 3.204024] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 3.209355] parport0: Printer, Xerox Phaser 3121
[ 3.293040] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 3.293145] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 3.888270] Adding 497972k swap on /dev/sda6. Priority:-1 extents:1 across:497972k
[ 3.932361] EXT3 FS on sda1, internal journal
[ 4.048281] loop: module loaded
[ 4.104535] device-mapper: uevent: version 1.0.3
[ 4.104840] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.931519] kjournald starting. Commit interval 5 seconds
[ 4.236293] EXT3 FS on sda5, internal journal
[ 4.236293] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.693440] NET: Registered protocol family 10
[ 4.693943] lo: Disabled Privacy Extensions
[ 4.694379] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.168756] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 5.168758] eth0: 10/100 speed: disabling TSO
[ 5.168902] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.405366] ACPI: WMI: Mapper loaded
[ 7.177356] lp0: using parport0 (interrupt-driven).
[ 7.189672] ppdev: user-space parallel port driver
[ 7.860534] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 8.932606] eth0: no IPv6 routers present
[ 9.179938] nvidia: module license 'NVIDIA' taints kernel.
[ 9.432172] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.432184] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 9.432282] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008

** Loaded modules:
Module Size Used by
nvidia 7815872 44
ppdev 8676 0
lp 11012 0
autofs4 20708 0
ac 4448 0
video 19728 0
output 3712 1 video
battery 8448 0
wmi 7880 0
sbs 8544 0
container 4736 0
sbshc 6784 1 sbs
acpi_cpufreq 9228 0
cpufreq_stats 5216 0
cpufreq_ondemand 8428 4
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 3812 0
cpufreq_conservative 7432 0
cpufreq_powersave 1856 0
ipv6 241956 20
dm_snapshot 17444 0
dm_mirror 25316 0
dm_mod 55656 2 dm_snapshot,dm_mirror
firewire_sbp2 15956 0
loop 16708 0
snd_hda_intel 310008 5
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
snd_pcm 68228 3 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 3780 0
snd_seq_oss 28544 0
snd_seq_midi 8064 0
snd_rawmidi 22528 1 snd_seq_midi
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21320 3 snd_pcm,snd_seq
snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
i2c_i801 9520 0
parport_pc 25860 1
snd 48772 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
parport 33868 3 ppdev,lp,parport_pc
i2c_core 22548 2 nvidia,i2c_i801
psmouse 35920 0
iTCO_wdt 11204 0
pcspkr 3136 0
serio_raw 6532 0
soundcore 7488 1 snd
rtc 14272 0
button 8240 0
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
intel_agp 25084 0
agpgart 31720 2 nvidia,intel_agp
evdev 11328 3
ext3 120264 2
jbd 43444 1 ext3
mbcache 8260 1 ext3
sg 33140 0
sr_mod 16804 0
sd_mod 26072 4
cdrom 31872 1 sr_mod
ide_pci_generic 4228 0 [permanent]
ide_core 100312 1 ide_pci_generic
ata_generic 8004 0
firewire_ohci 20836 0
firewire_core 35680 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
ahci 27336 3
pata_marvell 6912 0
libata 142032 3 ata_generic,ahci,pata_marvell
scsi_mod 138508 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 32620 0
dock 10448 1 libata
uhci_hcd 22352 0
usbcore 130032 3 ehci_hcd,uhci_hcd
e1000e 85156 0
thermal 19100 0
processor 39660 2 acpi_cpufreq,thermal
fan 5636 0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-92ffffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 93226100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Device [8086:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 216
Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 93224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 93225c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Intel Corporation Device [8086:2504]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 93220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: 93300000-933fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 93100000-931fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: 93400000-934fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: 93500000-935fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: 93600000-936fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 93225800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Memory behind bridge: 93000000-930fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at 3108 [size=8]
Region 1: I/O ports at 3114 [size=4]
Region 2: I/O ports at 3100 [size=8]
Region 3: I/O ports at 3110 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at 93225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 93226000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8500 GT [10de:0421] (rev a1)
Subsystem: Giga-byte Technology Device [1458:3445]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 93100000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: pata_marvell

07:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 93004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 93000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.25-2-686 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-11 GNU C Library: Shared libraries [i

-- debconf information:
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-30-2008, 11:35 AM
maximilian attems
 
Default Bug#483664: linux-image-2.6.25-2-686: sound only works when one virtual X console in use

On Fri, May 30, 2008 at 02:17:51PM +0300, Shai Berger wrote:
> Package: linux-image-2.6.25-2-686
> Version: 2.6.25-4
> Severity: normal
>
>
> Yesterday I upgraded the kernel from 2.6.24 to 2.6.25 (I was waiting
> for the nVidia kernel source fix). Since then, sound stops working
> as soon as a second user logs in.
>
> All users use virtual consoles -- the machine is a desktop. The problem
> arises when there are two graphical users (i.e. X servers on vt7 and vt8).
> When the problem starts, there is no sound on either session.
>
> Sound did work when there was an X session on vt7 and a text session
> on vt1.
>
> When I went back to 2.6.24, I had to run alsaconf fixed sound. Then
> I came back again to 2.6.25, only to have the problem repeat. Running
> alsaconf yet again seems to have fixed it.

so it is fixed on your box?

hmm the bug report lacks info about an eventual kernel failure.
anything in dmesg around that time.

> ** Tainted: P (1)

right try without it, sorry but with nvidia blob tainting
the kernel is no longer supported.

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 06-01-2008, 07:33 AM
Shai Berger
 
Default Bug#483664: linux-image-2.6.25-2-686: sound only works when one virtual X console in use

On Friday 30 May 2008, maximilian attems wrote:
> On Fri, May 30, 2008 at 02:17:51PM +0300, Shai Berger wrote:
> >
> > When I went back to 2.6.24, I had to run alsaconf fixed sound. Then
> > I came back again to 2.6.25, only to have the problem repeat. Running
> > alsaconf yet again seems to have fixed it.
>
> so it is fixed on your box?
>

I may need to rephrase the problem: There's a difference between 2.6.24 and
2.6.25, which made the upgrade non-smooth with respect to sound on my system.

> hmm the bug report lacks info about an eventual kernel failure.
> anything in dmesg around that time.
>

No, there were no kernel failures reported.

> > ** Tainted: P (1)
>
> right try without it, sorry but with nvidia blob tainting
> the kernel is no longer supported.

While I realize the problem the nvidia blob presents, this is a sad position
to take. Installing software from the Debian repository with module-assistant
made my kernel bug reports uninteresting?

I would try without the nvidia blob, but it's too much of a bother (because it
also requires a different X configuration). As you said, the sound problem is
solved on my system; the bug was filed in hope of improving the upgrade
experience for others.

Have fun,
Shai.




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 02:45 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org