FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-26-2008, 07:42 AM
"Louis-Maurice De Sousa"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

Package: linux-image-2.6.24-1-686
Version: 2.6.24-7

Hello,

I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
the line :
Running /scripts/init-premount

Some informations on my machine :

orval:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8374 P4X400 Host Controller/AGP Bridge
(rev 82)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
00:0c.0 FireWire (IEEE 1394): NEC Corporation uPD72874 IEEE1394 OHCI 1.1 3-port PHY-
Link Ctrlr (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev
80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890
South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97
Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon 9500
Pro]
01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro]
(Secondary)
************************************************** **************
With 2.6.22 kernel

orval:~# dpkg -s libc6 | grep ^Version
Version: 2.7-10

************************************************** **************
Boot sequence with 2.6.22 kernel

Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3
20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 261936) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261936
early_node_map[1] active PFN ranges
0: 0 -> 261936
On node 0 totalpages: 261936
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 254 pages used for memmap
HighMem zone: 32306 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000FA3A0, 0024 (r2 ACPIAM)
ACPI: XSDT 3FF30100, 003C (r1 A M I OEMXSDT 11000312 MSFT 97)
ACPI: FACP 3FF30290, 00F4 (r3 A M I OEMFACP 11000312 MSFT 97)
ACPI: DSDT 3FF303F0, 3562 (r1 A0017 A0017001 1 INTL 2002026)
ACPI: FACS 3FF40000, 0040
ACPI: APIC 3FF30390, 0052 (r1 A M I OEMAPIC 11000312 MSFT 97)
ACPI: OEMB 3FF40040, 0040 (r1 A M I AMI_OEM 11000312 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
Built 1 zonelists. Total pages: 259890
Kernel command line: root=/dev/hdb5 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2800.301 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033776k/1047744k available (1688k kernel code, 13268k reserved, 653k data,
244k init, 130240k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc034f000 - 0xc038c000 ( 244 kB)
.data : 0xc02a62bf - 0xc03497e4 ( 653 kB)
.text : 0xc0100000 - 0xc02a62bf (1688 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5610.20 BogoMIPS (lpj=11220410)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d
00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000041d 00000000
00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Total of 1 processors activated (5610.20 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: enabled onboard AC97/MC97 devices
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Time: tsc clocksource has been installed.
pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: df100000-df6fffff
PREFETCH window: bf000000-deffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1293k freed
audit: initializing netlink socket (disabled)
audit(1211792938.188:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Bypassing VIA 8237 APIC De-Assert Message
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 244k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: WDC WD800JB-00ETA0, ATA DISK drive
hdb: WDC WD1200JB-00REA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 2.21 loaded.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdb: max request size: 512KiB
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 57
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
eth0: VIA Rhine II at 0x1e400, 00:0e:a6:be:b0:b4, IRQ 17.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected VIA PT800 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Floppy drive(s): fd0 is 1.44M
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000edc0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
FDC 0 is a post-1991 82077
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 18, io base 0x0000ef00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[b] -> GSI 21 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 18, io base 0x0000ef20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[b] -> GSI 21 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 18, io base 0x0000ef40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
firewire_core: IRM has link off, making local node (ffc0) root.
firewire_core: phy config: card 0, new root=ffc0, gap_count=5
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 18, io mem 0xdfe00000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 20
ahc_pci:0:10:0: Host Adapter Bios disabled. Using default SCSI device parameters
firewire_ohci: swap not done yet
firewire_core: created new fw device fw0 (0 config rom retries)
usb 5-8: new high speed USB device using ehci_hcd and address 3
usb 5-8: configuration #1 chosen from 1 choice
hub 5-8:1.0: USB hub found
hub 5-8:1.0: 4 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.1: new full speed USB device using uhci_hcd and address 4
usb 2-1.1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
drivers/media/video/ov511.c: USB OV511+ video device found
drivers/media/video/ov511.c: model: Creative Labs WebCam 3
drivers/media/video/ov511.c: Sensor is an OV7620AE
drivers/media/video/ov511.c: Enabling 511+/7620AE workaround
drivers/media/video/ov511.c: Device at usb-0000:00:10.1-1.1 registered to minor 0
usbcore: registered new interface driver ov511
drivers/media/video/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI interrupt for device 0000:00:11.6 disabled
VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
sata_via 0000:00:0f.0: version 2.2
ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 20 (level, low) -> IRQ 16
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi1 : sata_via
scsi2 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001efe0 ctl 0x0001efae bmdma 0x0001ef90 irq 16
ata2: SATA max UDMA/133 cmd 0x0001efa0 ctl 0x0001efaa bmdma 0x0001ef98 irq 16
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
Adding 3148732k swap on /dev/hdb2. Priority:-1 extents:1 across:3148732k
EXT3 FS on hdb3, internal journal
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
fuse init (API version 7.8)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized radeon 1.27.0 20060524 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
eth0: no IPv6 routers present
CIFS VFS: cifs_mount failed w/return code = -6

************************************************** ************

Thanks for help.

--
Cordialement.

Louis-Maurice De Sousa




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-26-2008, 09:03 AM
maximilian attems
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

hello,

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:

> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-7
>
> Hello,
>
> I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
> the line :
> Running /scripts/init-premount
>

can you please try 2.6.25 from sid installs just fine in testing.
if it doesn't work then please the -486 variant. that be cool?

thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-26-2008, 10:19 AM
"Domschitz Zoltán"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

-- Eredeti üzenet --
Feladó: maximilian attems <max@stro.at>C*mzett: louis-maurice@pi-et-ro.net,482964@bugs.debian.orgMásolat: Elküldve: 11:30Téma: Bug#482964: boot freezes with kernel 2.6.24-1-686

hello,

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:

> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-7
>
> Hello,
>
> I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
> the line :
> Running /scripts/init-premount
>

can you please try 2.6.25 from sid installs just fine in testing.
if it doesn't work then please the -486 variant. that be cool?

thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org





_________________________________________

Megduplázzuk a tétjét! A bet-at-home.com-nál most mindenki 200 EURÓ BÓNUSZT
kassz*roz.

Éljen ezzel a lehetőséggel június 8-ig, mert dupla tét dupla nyereményt jelent!

bet-at-home.com - Játék az élet!
 
Old 05-26-2008, 10:19 AM
"Domschitz Zoltán"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

-- Eredeti üzenet --
Feladó: maximilian attems <max@stro.at>C*mzett: louis-maurice@pi-et-ro.net,482964@bugs.debian.orgMásolat: Elküldve: 11:30Téma: Bug#482964: boot freezes with kernel 2.6.24-1-686

hello,

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:

> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-7
>
> Hello,
>
> I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
> the line :
> Running /scripts/init-premount
>

can you please try 2.6.25 from sid installs just fine in testing.
if it doesn't work then please the -486 variant. that be cool?

thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org





_________________________________________

Megduplázzuk a tétjét! A bet-at-home.com-nál most mindenki 200 EURÓ BÓNUSZT
kassz*roz.

Éljen ezzel a lehetőséggel június 8-ig, mert dupla tét dupla nyereményt jelent!

bet-at-home.com - Játék az élet!
 
Old 05-26-2008, 10:19 AM
"Domschitz Zoltán"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

-- Eredeti üzenet --
Feladó: maximilian attems <max@stro.at>C*mzett: louis-maurice@pi-et-ro.net,482964@bugs.debian.orgMásolat: Elküldve: 11:30Téma: Bug#482964: boot freezes with kernel 2.6.24-1-686

hello,

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:

> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-7
>
> Hello,
>
> I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
> the line :
> Running /scripts/init-premount
>

can you please try 2.6.25 from sid installs just fine in testing.
if it doesn't work then please the -486 variant. that be cool?

thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org





_________________________________________

Megduplázzuk a tétjét! A bet-at-home.com-nál most mindenki 200 EURÓ BÓNUSZT
kassz*roz.

Éljen ezzel a lehetőséggel június 8-ig, mert dupla tét dupla nyereményt jelent!

bet-at-home.com - Játék az élet!
 
Old 05-26-2008, 10:19 AM
"Domschitz Zoltán"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

-- Eredeti üzenet --
Feladó: maximilian attems <max@stro.at>C*mzett: louis-maurice@pi-et-ro.net,482964@bugs.debian.orgMásolat: Elküldve: 11:30Téma: Bug#482964: boot freezes with kernel 2.6.24-1-686

hello,

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:

> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-7
>
> Hello,
>
> I'm still using kernel 2.6.22 on Lenny because since 2.6.23 release boot sequence freezes on
> the line :
> Running /scripts/init-premount
>

can you please try 2.6.25 from sid installs just fine in testing.
if it doesn't work then please the -486 variant. that be cool?

thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org





_________________________________________

Megduplázzuk a tétjét! A bet-at-home.com-nál most mindenki 200 EURÓ BÓNUSZT
kassz*roz.

Éljen ezzel a lehetőséggel június 8-ig, mert dupla tét dupla nyereményt jelent!

bet-at-home.com - Játék az élet!
 
Old 05-26-2008, 12:27 PM
maximilian attems
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

[ please keep bug report on cc, thanks! ]

On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:
> > can you please try 2.6.25 from sid installs just fine in testing.
> Done.
> *****************************
> orval:~# aptitude show linux-image-2.6.25-2-686
> Paquet : linux-image-2.6.25-2-686
> Nouveau: oui
> Etat: installe
> Automatiquement installe: non
> Version : 2.6.25-3
> Priorite : optionnel
> Section : admin
> Responsable : Debian Kernel Team <debian-kernel@lists.debian.org>
> Taille decompressee : 57,3M
> Depend: module-init-tools, initramfs-tools (>= 0.55) | yaird (>=
> 0.0.12-25) |
> linux-initramfs-tool
> Pre-depend: debconf (>= 0.2.17) | debconf-2.0
> Recommande: libc6-i686
> Suggere: linux-doc-2.6.25, grub | lilo
> Est en conflit: initramfs-tools (< 0.55), yaird (< 0.0.12-25)
> Fournit: linux-image, linux-image-2.6, linux-modules-2.6.25-2-686
> Description : Linux 2.6.25 image on PPro/Celeron/PII/PIII/P4
> This package provides the binary image and pre-built loadable modules for
> Linux
> kernel 2.6.25 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
> machines.
> ********************************************
> Same problem. Boot freezes on :
> **********
> Begin : Loading essential drivers
> done
> Begin : Running /scripts/init-premount

okay thanks for quick reaction.
thanks also for ruling out 686 false cpu detection due to 486 testing.

currenly the best guess is that udev is loading one driver that
makes your box freeze.

so please change in /etc/udev/udev.conf the log priority
udev_log="info" and then update initramfs
update-initramfs -u -k <kernelversion>

where kernelversion is the desired uname -r output in that case
2.6.25-2-686

make sure to rechange the udev_log afterwards to err, as this
slows down boot..

what are the last shown messages before freeze?





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-26-2008, 01:55 PM
"Louis-Maurice De Sousa"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

> [ please keep bug report on cc, thanks! ]
>
> On Mon, 26 May 2008, Louis-Maurice De Sousa wrote:
> > > can you please try 2.6.25 from sid installs just fine in
> > > testing.
[...]

>
> okay thanks for quick reaction.

Thanks to you :-)

> thanks also for ruling out 686 false cpu detection due to 486 testing.
>
> currenly the best guess is that udev is loading one driver that
> makes your box freeze.
>
> so please change in /etc/udev/udev.conf the log priority
> udev_log="info" and then update initramfs
> update-initramfs -u -k <kernelversion>
>
> where kernelversion is the desired uname -r output in that case
> 2.6.25-2-686
>
> make sure to rechange the udev_log afterwards to err, as this
> slows down boot..

Done.
But I only see udev logs on kernel 2.6.22-2 boot. It seems freeze occurs before udev starts.

> what are the last shown messages before freeze?

I only noted last 11 lines as I must write them on a paper :-)
I hope it will be enough.

***********************************
[ 1.132979] TCP cubic registered
[ 1.133038] NET: Registered protocol family 1
[ 1.133102] NET: Registered protocol family 17
[ 1.133161] Using IPI No-Shortcut mode
[ 1.133360] registered taskstats version 1
[ 1.133725] Freeing unused kernel memory: 252k freed
Loading please wait...
[ 1.162711] input: AT Translated Set 2 keyboard as /class/input/input0
Begin : Loading essential drivers
done
Begin : Running /scripts/init-premount
***********************************

--
Cordialement.

Louis-Maurice De Sousa




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-26-2008, 02:16 PM
maximilian attems
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

On Mon, May 26, 2008 at 03:55:31PM +0200, Louis-Maurice De Sousa wrote:
> > make sure to rechange the udev_log afterwards to err, as this
> > slows down boot..
>
> Done.
> But I only see udev logs on kernel 2.6.22-2 boot. It seems freeze occurs before udev starts.

okay that is also a nice indication.

please edit by hand
/usr/share/initramfs-tools/scripts/init-premount/thermal

and put below the esac a set -x, like in belows patch

diff --git a/scripts/init-premount/thermal b/scripts/init-premount/thermal
index aa146ec..698fbe7 100755
--- a/scripts/init-premount/thermal
+++ b/scripts/init-premount/thermal
@@ -15,6 +15,8 @@ prereqs)
;;
esac

+set -x
+
case "$DPKG_ARCH" in
# load the right modules
powerpc|ppc64)


then of course regenerate initramfs
update-initramfs -u -k <kernelversion>

> > what are the last shown messages before freeze?
>
> I only noted last 11 lines as I must write them on a paper :-)
> I hope it will be enough.
>
> ***********************************
> [ 1.132979] TCP cubic registered
> [ 1.133038] NET: Registered protocol family 1
> [ 1.133102] NET: Registered protocol family 17
> [ 1.133161] Using IPI No-Shortcut mode
> [ 1.133360] registered taskstats version 1
> [ 1.133725] Freeing unused kernel memory: 252k freed
> Loading please wait...
> [ 1.162711] input: AT Translated Set 2 keyboard as /class/input/input0
> Begin : Loading essential drivers
> done
> Begin : Running /scripts/init-premount
> ***********************************

still a bit in the dark over here, aboves looks fine,
no idea yet what freezes in init-premount but with aboves
debugging output we should know sooner

sunny greetings

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-26-2008, 03:02 PM
"Louis-Maurice De Sousa"
 
Default Bug#482964: boot freezes with kernel 2.6.24-1-686

> On Mon, May 26, 2008 at 03:55:31PM +0200, Louis-Maurice De Sousa
> wrote: > > make sure to rechange the udev_log afterwards to err, as
> this > > slows down boot.. > > Done. > But I only see udev logs on
> kernel 2.6.22-2 boot. It seems freeze occurs before udev starts.
>
> okay that is also a nice indication.
>
> please edit by hand
> /usr/share/initramfs-tools/scripts/init-premount/thermal
>
> and put below the esac a set -x, like in belows patch
>
> diff --git a/scripts/init-premount/thermal
> b/scripts/init-premount/thermal index aa146ec..698fbe7 100755 ---
> a/scripts/init-premount/thermal +++ b/scripts/init-premount/thermal @@
> -15,6 +15,8 @@ prereqs)
> ;;
> esac
>
> +set -x
> +
> case "$DPKG_ARCH" in
> # load the right modules
> powerpc|ppc64)

Done
*******************
case $1 in
# get pre-requisites
prereqs)
prereqs
exit 0
;;
esac
set -x

case "$DPKG_ARCH" in
# load the right modules
powerpc|ppc64)
**********************


>
> then of course regenerate initramfs
> update-initramfs -u -k <kernelversion>
>
> > > what are the last shown messages before freeze?

Two more lines appear :
Begin : Loading essential drivers
done
Begin : Running /scripts/init-premount
+ modprobe fan
+ modprobe thermal

> > I only noted last 11 lines as I must write them on a paper :-)
> > I hope it will be enough.
> >
> > ***********************************
> > [ 1.132979] TCP cubic registered
> > [ 1.133038] NET: Registered protocol family 1
> > [ 1.133102] NET: Registered protocol family 17
> > [ 1.133161] Using IPI No-Shortcut mode
> > [ 1.133360] registered taskstats version 1
> > [ 1.133725] Freeing unused kernel memory: 252k freed
> > Loading please wait...
> > [ 1.162711] input: AT Translated Set 2 keyboard as
> > /class/input/input0 Begin : Loading essential drivers done Begin :
> > Running /scripts/init-premount ***********************************
>
> still a bit in the dark over here, aboves looks fine,
> no idea yet what freezes in init-premount but with aboves
> debugging output we should know sooner
>
> sunny greetings

Not very sunny here near Paris :-)

--
Cordialement.

Louis-Maurice De Sousa




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 06:58 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org