FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-13-2008, 06:44 PM
Gerard Robin
 
Default Bug#481110: linux-image-2.6.25-1-amd64: my machine freezes definitively when I use mutt in CM

Package: linux-image-2.6.25-1-amd64
Version: 2.6.25-1
Severity: critical
Justification: breaks unrelated software

mutt works perfectly with kernel 2.6.22 amd64 (package debian) in CM and with xwindow
but when I use mutt with kernel 2.6.25-1-amd64 (package debian) it
freezes definitively my box in CM.
The problem doesn't occur with xwindow.


-- Package-specific info:
** Version:
Linux version 2.6.25-1-amd64 (Debian 2.6.25-1) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 25 14:38:55 UTC 2008

** Command line:
root=/dev/sda6 ro

** Tainted: P (1)

** Kernel log:
[ 11.117448] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 11.117492] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 11.117535] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 11.117579] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 11.117622] wifi0: Use hw queue 8 for CAB traffic
[ 11.117665] wifi0: Use hw queue 9 for beacons
[ 11.457041] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 11.146378] wifi0: Atheros 5212: mem=0xc0200000, irq=22
[ 11.490082] input: SynPS/2 Synaptics TouchPad as /class/input/input10
[ 12.174026] hda: UDMA/33 mode selected
[ 12.181456] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 12.181647] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[ 12.181794] ide: failed opcode was: 0xef
[ 12.882038] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k
[ 19.098316] loop: module loaded
[ 19.174639] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00)
[ 18.756714] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 18.756714] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 19.227653] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.228693] radeonfb: Retrieved PLL infos from BIOS
[ 19.228693] radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz
[ 19.228703] radeonfb: PLL min 20000 max 40000
[ 19.980441] Non-DDC laptop panel detected
[ 20.096449] i2c-adapter i2c-3: unable to read EDID block.
[ 20.280461] i2c-adapter i2c-3: unable to read EDID block.
[ 20.464472] i2c-adapter i2c-3: unable to read EDID block.
[ 20.917221] radeonfb: Monitor 1 type LCD found
[ 20.917221] radeonfb: Monitor 2 type no found
[ 20.917221] radeonfb: panel ID string: QDS
[ 20.917221] radeonfb: detected LVDS panel size from BIOS: 1280x800
[ 20.917221] radeondb: BIOS provided dividers will be used
[ 20.917221] Console: switching to colour frame buffer device 160x50
[ 20.948799] radeonfb (0000:01:05.0): ATI Radeon Yu
[ 21.118049] device-mapper: uevent: version 1.0.3
[ 21.118812] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 33.671132] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[ 33.671138] ReiserFS: sda8: using ordered data mode
[ 33.683596] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 33.683596] ReiserFS: sda8: checking transaction log (sda8)
[ 33.746845] ReiserFS: sda8: Using r5 hash to sort names
[ 33.785690] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 33.786252] ReiserFS: sda7: using ordered data mode
[ 33.787245] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 33.789692] ReiserFS: sda7: checking transaction log (sda7)
[ 33.858091] ReiserFS: sda7: Using r5 hash to sort names
[ 33.885152] ReiserFS: sda9: found reiserfs format "3.6" with standard journal
[ 33.885807] ReiserFS: sda9: using ordered data mode
[ 33.886877] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 33.889686] ReiserFS: sda9: checking transaction log (sda9)
[ 33.955134] ReiserFS: sda9: Using r5 hash to sort names
[ 36.297718] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 54.878409] pnp: the driver 'parport_pc' has been registered
[ 54.879033] lp: driver loaded but no devices found
[ 50.436995] ppdev: user-space parallel port driver
[ 55.423471] Clocksource tsc unstable (delta = -250005582 ns)
[ 58.766947] NET: Registered protocol family 10
[ 58.770164] lo: Disabled Privacy Extensions
[ 57.845795] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 67.290857] Bluetooth: Core ver 2.11
[ 67.291981] NET: Registered protocol family 31
[ 67.294069] Bluetooth: HCI device and connection manager initialized
[ 67.294447] Bluetooth: HCI socket layer initialized
[ 67.411859] Bluetooth: L2CAP ver 2.9
[ 67.412195] Bluetooth: L2CAP socket layer initialized
[ 67.424020] Bluetooth: RFCOMM socket layer initialized
[ 67.424379] Bluetooth: RFCOMM TTY layer initialized
[ 67.424701] Bluetooth: RFCOMM ver 1.8
[ 69.954211] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 69.954592] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[ 69.954957] ide: failed opcode was: 0xef
[ 70.241691] ath0: no IPv6 routers present
[ 75.838726] eth0: no IPv6 routers present
[ 110.690725] CPU0 attaching NULL sched-domain.
[ 110.690737] CPU1 attaching NULL sched-domain.
[ 110.710020] CPU0 attaching sched-domain:
[ 110.710020] domain 0: span 00000003
[ 110.710020] groups: 00000001 00000002
[ 110.710020] domain 1: span 00000003
[ 110.710020] groups: 00000003
[ 110.710020] domain 2: span 00000003
[ 110.710020] groups: 00000003
[ 110.710020] CPU1 attaching sched-domain:
[ 110.710020] domain 0: span 00000003
[ 110.710020] groups: 00000002 00000001
[ 110.710020] domain 1: span 00000003
[ 110.710020] groups: 00000003
[ 110.710020] domain 2: span 00000003
[ 110.710020] groups: 00000003
[ 392.555652] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 392.555660] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 392.663804] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[ 392.663811] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 393.077723] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 393.077723] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 393.153798] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[ 393.153798] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 393.631431] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 393.631431] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 393.720490] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[ 393.720490] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.

** Loaded modules:
Module Size Used by
binfmt_misc 17164 1
rfcomm 46112 0
l2cap 29696 5 rfcomm
bluetooth 65444 4 rfcomm,l2cap
ipv6 294248 24
ppdev 13832 0
parport_pc 34344 0
lp 17540 0
parport 44848 3 ppdev,parport_pc,lp
cpufreq_powersave 6272 0
cpufreq_stats 10528 0
cpufreq_ondemand 13712 1
cpufreq_conservative 13320 0
wlan_tkip 16256 1
wlan_ccmp 12672 1
dm_snapshot 22472 0
dm_mirror 31748 0
dm_mod 68536 2 dm_snapshot,dm_mirror
radeonfb 108480 1
fb_ddc 7168 1 radeonfb
i2c_algo_bit 11012 1 radeonfb
powernow_k8 19076 1
freq_table 9728 3 cpufreq_stats,cpufreq_ondemand,powernow_k8
cpufreq_userspace 9092 0
loop 23044 0
joydev 17664 0
wlan_scan_sta 18176 1
ath_rate_sample 17280 1
pcmcia 45080 0
firmware_class 14976 1 pcmcia
snd_hda_intel 414296 1
ath_pci 99376 0
yenta_socket 31500 1
rsrc_nonstatic 16128 1 yenta_socket
wlan 205856 6 wlan_tkip,wlan_ccmp,wlan_scan_sta,ath_rate_sample, ath_pci
snd_pcm_oss 46752 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
sdhci 22796 0
pcmcia_core 46500 3 pcmcia,yenta_socket,rsrc_nonstatic
ath_hal 222576 3 ath_rate_sample,ath_pci
snd_timer 29328 1 snd_pcm
psmouse 45724 0
mmc_core 56416 1 sdhci
serio_raw 11652 0
pcspkr 7808 0
snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
soundcore 13088 1 snd
i2c_piix4 13964 0
i2c_core 30752 4 radeonfb,fb_ddc,i2c_algo_bit,i2c_piix4
k8temp 10624 0
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
video 27412 0
output 8704 1 video
battery 14208 0
container 9600 0
ac 9344 0
button 13856 0
shpchp 38300 0
pci_hotplug 35512 1 shpchp
acer_wmi 17224 0
wmi 13120 1 acer_wmi
evdev 17408 7
led_class 10248 1 acer_wmi
reiserfs 224384 4
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
sd_mod 33728 6
atiixp 8836 0 [permanent]
ide_pci_generic 9476 0 [permanent]
8139cp 28544 0
ide_core 138160 3 ide_cd_mod,atiixp,ide_pci_generic
usbhid 49632 0
hid 44736 1 usbhid
ff_memless 10248 1 usbhid
8139too 33280 0
mii 10240 2 8139cp,8139too
ata_generic 13572 0
sata_sil 17160 5
ehci_hcd 40076 0
libata 165808 2 ata_generic,sata_sil
scsi_mod 170360 2 sd_mod,libata
ohci_hcd 28164 0
dock 16288 1 libata
thermal 26656 0
processor 49388 2 powernow_k8,thermal
fan 10760 0

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp

00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8434 [size=4]
Region 2: I/O ports at 8438 [size=8]
Region 3: I/O ports at 8430 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil, ata_generic, ide-pci-generic

00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 83)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 82 [Master PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
Kernel modules: ata_generic, atiixp, ide-pci-generic

00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 88000000-8bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] [1002:5975]
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
Kernel modules: radeonfb

06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c0210000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

06:02.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)
Subsystem: AMBIT Microsystem Corp. Device [1468:0418]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k

06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0211000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0210400 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>

06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at c0210800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci

06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0210c00 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>

06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:009f]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at c0210100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci



-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.ISO-8859-1, LC_CTYPE=fr_FR.ISO-8859-1 (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.25-1-amd64 recommends no packages.

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-1-amd64/postinst/bootloader-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/abort-install-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/depmod-error-initrd-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/lilo-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/bootloader-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/overwriting-modules-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/prerm/removing-running-kernel-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-1-amd64/preinst/initrd-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/depmod-error-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/failed-to-move-modules-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-system-map-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-1-amd64/prerm/would-invalidate-boot-loader-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/bootloader-test-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/abort-overwrite-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/create-kimage-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/old-dir-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/elilo-initrd-2.6.25-1-amd64: true


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-14-2008, 07:40 AM
maximilian attems
 
Default Bug#481110: linux-image-2.6.25-1-amd64: my machine freezes definitively when I use mutt in CM

On Tue, May 13, 2008 at 08:44:57PM +0200, Gerard Robin wrote:
> Package: linux-image-2.6.25-1-amd64
> Version: 2.6.25-1
> Severity: critical
> Justification: breaks unrelated software
>
> mutt works perfectly with kernel 2.6.22 amd64 (package debian) in CM and with xwindow
> but when I use mutt with kernel 2.6.25-1-amd64 (package debian) it
> freezes definitively my box in CM.
> The problem doesn't occur with xwindow.

you have to show some evidence, can't reproduce your trouble.
using mutt here on any kernel greater with 2.6.22 works perfectly.

what do you mean by "freeze"?
send in while opening mutt the output of
vmstat 1

also learn to set proper severities.

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 02:48 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org