FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-13-2008, 09:52 AM
Heinrich Hiemesch
 
Default Bug#466525: linux-image-2.6.22-3-486: Kernel oops NULL pointer dereference at virtual address 0x68 on AMD Geode

Package: linux-image-2.6.22-3-486
Version: 2.6.22-6.lenny1
Followup-For: Bug #466525

There is no information about the bug in any of the logs on the computer. I
made a photo of the screen before reboot and uploaded it to
http://img241.imagevenue.com/img.php?image=72042_R0011983_122_492lo.JPG
Otherwise too much to type and may be typematic errors.

-- Package-specific info:
** Version:
Linux version 2.6.22-3-486 (Debian 2.6.22-6.lenny1) (sf@debian.org) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 Sun Feb 10 19:36:16 UTC 2008

** Not tainted

** Kernel log:
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0d.0 to 64
eth0: VIA Rhine III (Management Adapter) at 0x1fc00, 00:0d:b9:0c:fa:cc, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 0021.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
libata version 2.21 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hdaMA, hdbio
Probing IDE interface ide0...
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
hda: TRANSCEND, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.4[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hda: max request size: 128KiB
hda: 7962192 sectors (4076 MB) w/1KiB Cache, CHS=7899/16/63, UDMA(33)
hda: hda1 hda2 < hda5 >
ACPI: PCI Interrupt 0000:00:0f.5[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0f.5 to 64
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new high speed USB device using ehci_hcd and address 2
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 2-4: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 221458
EXT3-fs: hda1: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:01.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
geode-aes: GEODE AES engine enabled.
cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
Real Time Clock Driver v1.12ac
AMD Geode RNG detected
input: PC Speaker as /class/input/input1
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-pctv-400e-01.fw'
usbcore: registered new interface driver dvb_usb_ttusb2
usb 2-4: USB disconnect, address 2
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
Adding 224868k swap on /dev/hda5. Priority:-1 extents:1 across:224868k
EXT3 FS on hda1, internal journal
usb 2-4: new high speed USB device using ehci_hcd and address 3
usb 2-4: configuration #1 chosen from 1 choice
dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle 400e DVB-S USB2.0).
DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully initialized and connected.
loop: module loaded
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: AC Adapter [AC] (on-line)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present

** Loaded modules:
Module Size Used by
ppdev 8708 0
lp 10948 0
button 7952 0
ac 5252 0
battery 10116 0
ipv6 224932 16
loop 16260 0
lnbp21 2304 1
tda826x 3716 1
tda10086 9092 1
dvb_usb_ttusb2 7168 10
dvb_usb 19852 1 dvb_usb_ttusb2
dvb_core 73512 1 dvb_usb
firmware_class 9472 1 dvb_usb
dvb_pll 14212 1 dvb_usb
parport_pc 33444 1
parport 32968 3 ppdev,lp,parport_pc
i2c_core 23440 5 lnbp21,tda826x,tda10086,dvb_usb,dvb_pll
psmouse 35728 0
pcspkr 2944 0
geode_rng 2432 0
serio_raw 6660 0
rtc 12568 0
cs5535_gpio 5108 0
geode_aes 6020 0
blkcipher 6020 1 geode_aes
evdev 9472 0
ext3 118408 1
jbd 49832 1 ext3
ide_disk 16384 3
ehci_hcd 30476 0
ohci_hcd 19588 0
amd74xx 13596 0 [permanent]
generic 4868 0 [permanent]
ide_core 112040 3 ide_disk,amd74xx,generic
ata_generic 7684 0
usbcore 123544 5 dvb_usb_ttusb2,dvb_usb,ehci_hcd,ohci_hcd
libata 116208 1 ata_generic
scsi_mod 136844 1 libata
via_rhine 23176 0
mii 5376 1 via_rhine
thermal 13448 0
processor 23984 1 thermal
fan 4868 0

** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 31)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: I/O ports at ac1c [size=4]
Region 1: I/O ports at 9e00 [size=8]

00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD] Geode LX Video [1022:2081] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices [AMD] Geode LX Video [1022:2081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at effec000 (32-bit, non-prefetchable) [size=16K]
Region 3: Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
Region 4: Memory at efff8000 (32-bit, non-prefetchable) [size=16K]

00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: Geode LX AES
Kernel modules: geode-rng, geode-aes

00:0d.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
Subsystem: VIA Technologies, Inc. Unknown device [1106:0106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
Kernel modules: via-rhine

00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090]
Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 6100 [size=256]
Region 2: I/O ports at 6200 [size=64]
Region 3: I/O ports at 1000 [size=32]
Region 4: I/O ports at 9d00 [size=128]
Region 5: I/O ports at 9c00 [size=64]
Kernel modules: cs5535_gpio

00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)

Kernel: Linux 2.6.22-3-486
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-3-486 depends on:
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.22-3-486 recommends no packages.

-- debconf information:
linux-image-2.6.22-3-486/postinst/depmod-error-2.6.22-3-486: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-3-486/preinst/abort-overwrite-2.6.22-3-486:
linux-image-2.6.22-3-486/prerm/would-invalidate-boot-loader-2.6.22-3-486: true
linux-image-2.6.22-3-486/prerm/removing-running-kernel-2.6.22-3-486: true
linux-image-2.6.22-3-486/preinst/lilo-has-ramdisk:
linux-image-2.6.22-3-486/postinst/old-system-map-link-2.6.22-3-486: true
linux-image-2.6.22-3-486/preinst/bootloader-initrd-2.6.22-3-486: true
linux-image-2.6.22-3-486/preinst/lilo-initrd-2.6.22-3-486: true
linux-image-2.6.22-3-486/preinst/initrd-2.6.22-3-486:
linux-image-2.6.22-3-486/postinst/bootloader-test-error-2.6.22-3-486:
* linux-image-2.6.22-3-486/preinst/already-running-this-2.6.22-3-486:
linux-image-2.6.22-3-486/postinst/old-initrd-link-2.6.22-3-486: true
linux-image-2.6.22-3-486/preinst/elilo-initrd-2.6.22-3-486: true
linux-image-2.6.22-3-486/postinst/old-dir-initrd-link-2.6.22-3-486: true
linux-image-2.6.22-3-486/postinst/bootloader-error-2.6.22-3-486:
linux-image-2.6.22-3-486/preinst/failed-to-move-modules-2.6.22-3-486:
linux-image-2.6.22-3-486/preinst/abort-install-2.6.22-3-486:
linux-image-2.6.22-3-486/preinst/overwriting-modules-2.6.22-3-486: true
linux-image-2.6.22-3-486/postinst/create-kimage-link-2.6.22-3-486: true
linux-image-2.6.22-3-486/postinst/kimage-is-a-directory:
linux-image-2.6.22-3-486/postinst/depmod-error-initrd-2.6.22-3-486: false



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 05-13-2008, 12:36 PM
maximilian attems
 
Default Bug#466525: linux-image-2.6.22-3-486: Kernel oops NULL pointer dereference at virtual address 0x68 on AMD Geode

On Tue, May 13, 2008 at 11:52:31AM +0200, Heinrich Hiemesch wrote:
> Package: linux-image-2.6.22-3-486
> Version: 2.6.22-6.lenny1
> Followup-For: Bug #466525
>
> There is no information about the bug in any of the logs on the computer. I
> made a photo of the screen before reboot and uploaded it to
> http://img241.imagevenue.com/img.php?image=72042_R0011983_122_492lo.JPG
> Otherwise too much to type and may be typematic errors.
>

outdated image, there is no longer a 2.6.22 in lenny,
please upgrade to recent and see if you can still reproduce.


thanks

--
maks



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 06:25 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org