FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-08-2008, 08:42 PM
Carl Fink
 
Default Bug#480225: bmc43xx driver module not installed

Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-6
Severity: normal

I'm trying to set up my laptop which uses the Broadcom BCM4328 WiFi chip.
However, the current kernel does not ship with the necessary module (as
2.6.18 did), meaning
that to use this hardware I will need to compile my own kernel. Please add
this module to future versions.

-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-6) (waldi@debian.org) (gcc
version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 18
23:08:22 UTC 2008

** Command line:
root=/dev/sda5 ro noapic nolapic

** Not tainted

** Kernel log:
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
input: Video Bus as /class/input/input7
ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: PC Speaker as /class/input/input9
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
ricoh-mmc: Controller is now disabled.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:07:05.1[b] -> Link [LNK2] -> GSI 11 (level, low) ->
IRQ 11
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support
it.
mmc0: SDHCI at 0xb8000800 irq 11 DMA
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [LAZA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:10.1 to 64
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input10
Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k
EXT3 FS on sda5, internal journal
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
dm-devel@redhat.com
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean.
Will not be able to remount read-write. Mount in Windows.
NTFS-fs warning (device sda1): load_system_files(): Windows is hibernated.
Will not be able to remount read-write. Run chkdsk.
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors
(2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x16
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -300009051 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
eth1: no IPv6 routers present
irq 7: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.24-1-amd64 #1

Call Trace:
<IRQ> [<ffffffff8026d4bb>] __report_bad_irq+0x30/0x72
[<ffffffff8026d70c>] note_interrupt+0x20f/0x253
[<ffffffff8026e1e8>] handle_level_irq+0xac/0xe8
[<ffffffff8020ede4>] do_IRQ+0x6c/0xd4
[<ffffffff8020c341>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff880061c8>] rocessor:acpi_safe_halt+0x28/0x39
[<ffffffff88006240>] rocessor:acpi_idle_enter_c1+0x67/0x70
[<ffffffff8039cf3c>] cpuidle_idle_call+0x74/0xa8
[<ffffffff8039cec8>] cpuidle_idle_call+0x0/0xa8
[<ffffffff8020b16a>] cpu_idle+0x90/0xbb

handlers:
[<ffffffff80384123>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #7
NTFS-fs error (device sda1): ntfs_ucstonls(): Unicode name contains
characters that cannot be converted to character set iso8859-1. You might
want to try to use the mount option nls=utf8.
NTFS-fs warning (device sda1): ntfs_filldir(): Skipping unrepresentable
inode 0x12011.
NTFS-fs error (device sda1): ntfs_ucstonls(): Unicode name contains
characters that cannot be converted to character set iso8859-1. You might
want to try to use the mount option nls=utf8.
NTFS-fs warning (device sda1): ntfs_filldir(): Skipping unrepresentable
inode 0x12003.
NTFS-fs error (device sda1): ntfs_ucstonls(): Unicode name contains
characters that cannot be converted to character set iso8859-1. You might
want to try to use the mount option nls=utf8.
NTFS-fs warning (device sda1): ntfs_filldir(): Skipping unrepresentable
inode 0x12033.
NTFS-fs error (device sda1): ntfs_ucstonls(): Unicode name contains
characters that cannot be converted to character set iso8859-1. You might
want to try to use the mount option nls=utf8.
NTFS-fs warning (device sda1): ntfs_filldir(): Skipping unrepresentable
inode 0x12008.
NTFS-fs error (device sda1): ntfs_ucstonls(): Unicode name contains
characters that cannot be converted to character set iso8859-1. You might
want to try to use the mount option nls=utf8.
NTFS-fs warning (device sda1): ntfs_filldir(): Skipping unrepresentable
inode 0x12013.
printk: 2 messages suppressed.
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Inode is not in use!
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Failed with error
code -5. Marking corrupt inode 0x124f1 as bad. Run chkdsk.
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Inode is not in use!
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Failed with error
code -5. Marking corrupt inode 0xc3fc as bad. Run chkdsk.
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Inode is not in use!
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Failed with error
code -5. Marking corrupt inode 0x156d2 as bad. Run chkdsk.
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Inode is not in use!
NTFS-fs error (device sda1): ntfs_read_locked_inode(): Failed with error
code -5. Marking corrupt inode 0x156d4 as bad. Run chkdsk.

** Loaded modules:
Module Size Used by
binfmt_misc 17292 1
rfcomm 46240 0
l2cap 29568 5 rfcomm
bluetooth 65956 4 rfcomm,l2cap
ipv6 286248 14
ppdev 13832 0
parport_pc 42408 0
lp 17476 0
parport 44812 3 ppdev,parport_pc,lp
ipt_MASQUERADE 8448 1
iptable_nat 12036 1
nf_nat 25644 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 24208 2 iptable_nat
nf_conntrack 77936 4
ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv 4
ip_tables 25576 1 iptable_nat
x_tables 24712 3 ipt_MASQUERADE,iptable_nat,ip_tables
powernow_k8 18464 1
cpufreq_userspace 9604 0
cpufreq_powersave 6272 0
cpufreq_ondemand 13712 1
cpufreq_stats 10528 0
freq_table 9728 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 13320 0
ntfs 197216 1
nls_iso8859_1 9728 2
nls_cp437 11392 1
vfat 17920 1
fat 58288 1 vfat
dm_snapshot 21960 0
dm_mirror 27008 0
dm_mod 67832 2 dm_snapshot,dm_mirror
b43 120616 0
ssb 39428 1 b43
rfkill 12816 1 b43
pcmcia 45720 2 b43,ssb
firmware_class 15104 2 b43,pcmcia
mac80211 132236 1 b43
cfg80211 19856 1 mac80211
led_class 10120 1 b43
input_polldev 9872 1 b43
pcmcia_core 46500 2 b43,pcmcia
firewire_sbp2 20624 0
loop 22788 0
joydev 17536 0
snd_hda_intel 362024 0
snd_pcm_oss 46624 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 89352 2 snd_hda_intel,snd_pcm_oss
snd_timer 28552 1 snd_pcm
psmouse 45724 0
sdhci 23172 0
snd 65896 5
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
ricoh_mmc 8192 0
pcspkr 7808 0
serio_raw 11908 0
k8temp 10496 0
mmc_core 58760 1 sdhci
soundcore 13216 1 snd
snd_page_alloc 15248 2 snd_hda_intel,snd_pcm
i2c_nforce2 11136 0
i2c_core 29824 1 i2c_nforce2
video 25620 0
output 8704 1 video
battery 19976 0
ac 11400 0
button 13984 0
evdev 17024 8
ext3 139024 1
jbd 55976 1 ext3
mbcache 13952 1 ext3
ide_cd 44704 0
cdrom 39464 1 ide_cd
sd_mod 33536 5
generic 9732 0 [permanent]
usbhid 35168 0
hid 41792 1 usbhid
amd74xx 14360 0 [permanent]
ide_core 144920 3 ide_cd,generic,amd74xx
sata_nv 33032 4
ata_generic 13060 0
firewire_ohci 24192 0
firewire_core 49472 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
ehci_hcd 39692 0
forcedeth 54540 0
libata 162736 2 sata_nv,ata_generic
scsi_mod 170296 3 firewire_sbp2,sd_mod,libata
ohci_hcd 28164 0
thermal 22688 0
processor 45032 4 powernow_k8,thermal
fan 9864 0

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0]
(rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0
[10de:02fa] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1
[10de:02fe] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5
[10de:02f8] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4
[10de:02f9] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff]
(rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3
[10de:027f] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2
[10de:027e] (rev a2)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge
[10de:02fc] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b4000000-b5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge
[10de:02fd] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: b6000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Geforce
6150 Go] [10de:0244] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270]
(rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260]
(rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1d00 [size=128]

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev
a3)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026d] (rev a3) (prog-if 10)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026e] (rev a3) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev
f1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 3080 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, generic

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 30c0 [size=8]
Region 1: I/O ports at 30b4 [size=4]
Region 2: I/O ports at 30b8 [size=8]
Region 3: I/O ports at 30b0 [size=4]
Region 4: I/O ports at 3090 [size=16]
Region 5: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, generic

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f]
(rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: b8000000-b80fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller
[10de:0269] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30e0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

03:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:1366]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at b6000000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at d0200000 (64-bit, prefetchable) [size=1M]
Capabilities: <access denied>

07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b8000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci

07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b8000c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc

07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f



-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (600, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.24-1-amd64 recommends no packages.

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 12:51 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org