Bug#480034: linux-image-2.6.25-1-amd64: No sound after suspend-to-ram an wake-up (snd_hda_intel)

05-07-2008, 05:44 PM

Package: linux-image-2.6.25-1-amd64
Version: 2.6.25-1
Severity: normal

After a suspend to ram and a wake up cycle the sound board does not
output any sound.

It worked with linux-image-2.6.24-1-amd64 and does not with
linux-image-2.6.25-1-amd64.

Unloading snd_hda_intel and reloading it makes the sound work again.

Cheers,
--
Arnaud Cornet

-- Package-specific info:
** Version:
Linux version 2.6.25-1-amd64 (Debian 2.6.25-1) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 25 14:38:55 UTC 2008

** Command line:
root=/dev/mapper/main_vg-root_lv ro vga=791

** Not tainted

** Kernel log:
[ 50.999581] ACPI: Preparing to enter system sleep state S3
[ 51.000063] Disabling non-boot CPUs ...
[ 51.000075] CPU0 attaching NULL sched-domain.
[ 51.000078] CPU1 attaching NULL sched-domain.
[ 51.031252] CPU 1 is now offline
[ 51.031255] SMP alternatives: switching to UP code
[ 51.032479] CPU0 attaching sched-domain:
[ 51.032482] domain 0: span 00000001
[ 51.032483] groups: 00000001
[ 51.032652] CPU1 is down
[ 51.032652] Back to C!
[ 51.033116] Force enabled HPET at resume
[ 51.033163] Enabling non-boot CPUs ...
[ 51.033282] CPU0 attaching NULL sched-domain.
[ 51.043337] SMP alternatives: switching to SMP code
[ 51.044247] Booting processor 1/2 APIC 0x1
[ 41.306597] Initializing CPU#1
[ 41.306597] Calibrating delay using timer specific routine.. 4267.94 BogoMIPS (lpj=8535896)
[ 41.306597] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 41.306597] CPU: L2 cache: 2048K
[ 41.306597] CPU 1/1 -> Node 0
[ 41.306597] CPU: Physical Processor ID: 0
[ 41.306597] CPU: Processor Core ID: 1
[ 41.306597] Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 51.135625] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 51.139328] CPU0 attaching sched-domain:
[ 51.139330] domain 0: span 00000003
[ 51.139332] groups: 00000001 00000002
[ 51.139334] domain 1: span 00000003
[ 51.139335] groups: 00000003
[ 51.139338] CPU1 attaching sched-domain:
[ 51.139339] domain 0: span 00000003
[ 51.139340] groups: 00000002 00000001
[ 51.139342] domain 1: span 00000003
[ 51.139344] groups: 00000003
[ 41.306606] microcode: Could not apply microcode to CPU1: sig=0x6f6, pf=0x1, rev=0xcb
[ 41.306606] CPU1 is up
[ 41.306606] ACPI: Unable to turn cooling device [ffff81007f361670] 'off'
[ 41.306606] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
[ 41.306610] Switched to high resolution mode on CPU 1
[ 41.319677] PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing fde80000)
[ 41.319682] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900006)
[ 41.326631] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10b)
[ 41.326645] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing fdff8004)
[ 41.326650] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[ 41.326655] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 41.326673] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 41.326680] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 41.367058] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 41.367064] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 41.367094] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[ 41.367099] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 41.367128] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 41.367133] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 41.367163] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 41.367168] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 41.370618] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[ 41.370621] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 41.370627] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 41.370639] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 105)
[ 41.370655] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing fdfff000)
[ 41.370702] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 41.370748] PM: Writing back config space on device 0000:00:1f.1 at offset 8 (was f001, writing fa01)
[ 41.370764] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 41.374644] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
[ 41.374649] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 41.410628] PM: Writing back config space on device 0000:01:0b.0 at offset f (was 1f170100, writing 1f17010f)
[ 41.410648] PM: Writing back config space on device 0000:01:0b.0 at offset 5 (was 1, writing ec01)
[ 41.410652] PM: Writing back config space on device 0000:01:0b.0 at offset 4 (was 0, writing fddf8000)
[ 41.410656] PM: Writing back config space on device 0000:01:0b.0 at offset 3 (was 0, writing 1710)
[ 41.410661] PM: Writing back config space on device 0000:01:0b.0 at offset 1 (was 2b00000, writing 2b00007)
[ 41.410700] skge eth1: enabling interface
[ 41.413997] pnp: Res cnt 2
[ 41.414636] pnp: res cnt 2
[ 41.414637] pnp: Encode io
[ 41.414638] pnp: Encode irq
[ 41.414924] serial 00:07: activated
[ 41.415161] pnp: Res cnt 2
[ 41.415394] pnp: res cnt 2
[ 41.415396] pnp: Encode io
[ 41.415397] pnp: Encode irq
[ 41.415688] parport_pc 00:08: activated
[ 51.212987] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 51.213501] hda: UDMA/33 mode selected
[ 51.213806] sd 0:0:0:0: [sda] Starting disk
[ 44.222981] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 44.222984] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 44.222987] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 54.023747] ata1.00: configured for UDMA/133
[ 54.027441] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 54.027441] sd 0:0:0:0: [sda] Write Protect is off
[ 54.027441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 54.027441] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 54.027467] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.029764] Restarting tasks ... done.
[ 55.259518] skge eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 65.565823] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 67.115384] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 67.115410] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 67.146129] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...

** Loaded modules:
Module Size Used by
snd_hda_intel 414296 1
binfmt_misc 17164 1
i915 37632 1
drm 99112 2 i915
cpufreq_conservative 13320 2
ppdev 13832 0
lp 17540 0
ac 9344 0
battery 14208 0
microcode 17336 0
firmware_class 14976 1 microcode
ipv6 294248 24
nfs 261232 3
lockd 73904 1 nfs
nfs_acl 8192 1 nfs
sunrpc 206984 15 nfs,lockd,nfs_acl
fuse 53440 3
coretemp 13056 0
it87 31256 0
hwmon_vid 7680 1 it87
eeprom 12560 0
acpi_cpufreq 14096 0
freq_table 9728 1 acpi_cpufreq
firewire_sbp2 22808 0
loop 23044 0
snd_pcm_oss 46752 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
iTCO_wdt 17360 0
snd_timer 29328 1 snd_pcm
snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
rng_core 9864 0
intel_agp 34160 1
soundcore 13088 1 snd
button 13856 0
parport_pc 34344 1
i2c_i801 15260 0
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
parport 44848 3 ppdev,lp,parport_pc
evdev 17408 3
i2c_core 30752 2 eeprom,i2c_i801
pcspkr 7808 0
ext3 139280 3
jbd 55336 1 ext3
mbcache 13956 1 ext3
dm_mirror 31748 0
dm_snapshot 22472 0
dm_mod 68536 10 dm_mirror,dm_snapshot
sd_mod 33728 4
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
ata_piix 28676 3
usbhid 49632 0
hid 44736 1 usbhid
ff_memless 10248 1 usbhid
ata_generic 13572 0
libata 165808 2 ata_piix,ata_generic
scsi_mod 170360 3 firewire_sbp2,sd_mod,libata
dock 16288 1 libata
piix 12808 0 [permanent]
floppy 66984 0
skge 47248 0
ide_pci_generic 9476 0 [permanent]
ide_core 138160 3 ide_cd_mod,piix,ide_pci_generic
firewire_ohci 27908 0
firewire_core 45920 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
ehci_hcd 40076 0
uhci_hcd 29472 0
thermal 26656 0
processor 49388 2 acpi_cpufreq,thermal
fan 10760 0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ff00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fdf80000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2776] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fde80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ide-pci-generic, piix, ata_generic

00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f900 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f700 [size=8]
Region 3: I/O ports at f600 [size=4]
Region 4: I/O ports at f500 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_generic, ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ef00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

01:0b.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 23 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at ec00 [size=256]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge

-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.25-1-amd64 recommends no packages.

-- debconf information:
linux-image-2.6.25-1-amd64/preinst/abort-install-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/overwriting-modules-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/prerm/removing-running-kernel-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-1-amd64/prerm/would-invalidate-boot-loader-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/bootloader-test-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/abort-overwrite-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/create-kimage-link-2.6.25-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-1-amd64/postinst/bootloader-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/depmod-error-initrd-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/lilo-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/bootloader-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-1-amd64/preinst/initrd-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/depmod-error-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/failed-to-move-modules-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-system-map-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/old-dir-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/elilo-initrd-2.6.25-1-amd64: true

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-08-2008, 09:11 AM

reopen 480034
thanks

Please ignore messages with subject: linux-image-2.6.25-1-amd64: Missing
snd-hda-intel module

--
Arnaud Cornet

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 08:32 AM

I'd like to report that I observe the same behaviour on my machine.
With 2.6.24 sound after resume from suspend-to-ram works, while with 2.6.25
there's no output. Applications seem to work just fine, playing the tracks,
but no sound comes out.

I'm not sure how to help debugging this, any pointers welcome.

--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f

Sponsor:
Scopri le tue passioni con Leonardo.it!

Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7614&d=20080509

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 09:02 AM

On Fri, May 09, 2008 at 10:32:29AM +0200, Jack Malmostoso wrote:
> I'd like to report that I observe the same behaviour on my machine.
> With 2.6.24 sound after resume from suspend-to-ram works, while with 2.6.25
> there's no output. Applications seem to work just fine, playing the tracks,
> but no sound comes out.
>
> I'm not sure how to help debugging this, any pointers welcome.

how do you suspend?

did you try:
echo mem > /sys/power/state

if that doesn't work please report upstream in bugzilla.kernel.org
and let us know the bug nr.

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 11:52 AM

Hello Maximilian, thank you for answering.

> how do you suspend?

I just close the lid of the laptop.
Just to complete information:

jack@vasquez:~$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)

> did you try:
> echo mem > /sys/power/state

I did and the machine went properly in sleep. When I woke it up, this is all
I could find in /var/log/messages:

May 9 13:47:38 vasquez kernel: [ 186.601919] PM: Syncing filesystems ...
done.
May 9 13:47:54 vasquez kernel: [ 188.092004] Freezing user space processes
... (elapsed 0.00 seconds) done.
May 9 13:47:54 vasquez kernel: [ 188.092813] Freezing remaining freezable
tasks ... (elapsed 0.00 seconds) done.
May 9 13:47:54 vasquez kernel: [ 188.092974] Suspending console(s)
May 9 13:47:54 vasquez kernel: [ 188.093498] ACPI: PCI interrupt for
device 0000:00:02.0 disabled
May 9 13:47:54 vasquez kernel: [ 192.182003] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
May 9 13:47:54 vasquez kernel: [ 192.182122] sd 0:0:0:0: [sda] Stopping
disk
May 9 13:47:54 vasquez kernel: [ 189.435728] ricoh-mmc: Suspending.
May 9 13:47:54 vasquez kernel: [ 189.435755] ricoh-mmc: Controller is now
re-enabled.
May 9 13:47:54 vasquez kernel: [ 189.435855] ACPI: PCI interrupt for
device 0000:06:01.1 disabled
May 9 13:47:54 vasquez kernel: [ 189.474817] sky2 eth1: disabling
interface
May 9 13:47:54 vasquez kernel: [ 189.506943] ACPI: PCI interrupt for
device 0000:02:00.0 disabled
May 9 13:47:54 vasquez kernel: [ 189.566994] ACPI: PCI interrupt for
device 0000:03:00.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.104859] ACPI: PCI interrupt for
device 0000:00:1d.7 disabled
May 9 13:47:54 vasquez kernel: [ 190.281801] ACPI: PCI interrupt for
device 0000:00:1d.2 disabled
May 9 13:47:54 vasquez kernel: [ 190.281854] ACPI: PCI interrupt for
device 0000:00:1d.1 disabled
May 9 13:47:54 vasquez kernel: [ 190.281907] ACPI: PCI interrupt for
device 0000:00:1d.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.491171] ACPI: PCI interrupt for
device 0000:00:1b.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.667848] ACPI: PCI interrupt for
device 0000:00:1a.7 disabled
May 9 13:47:54 vasquez kernel: [ 190.758960] ACPI: PCI interrupt for
device 0000:00:1a.1 disabled
May 9 13:47:54 vasquez kernel: [ 190.758992] ACPI: PCI interrupt for
device 0000:00:1a.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.762897] ACPI: Preparing to enter
system sleep state S3
May 9 13:47:54 vasquez kernel: [ 190.765106] Disabling non-boot CPUs ...
May 9 13:47:54 vasquez kernel: [ 190.878894] CPU 1 is now offline
May 9 13:47:54 vasquez kernel: [ 190.878900] SMP alternatives: switching
to UP code
May 9 13:47:54 vasquez kernel: [ 190.882813] CPU1 is down
May 9 13:47:54 vasquez kernel: [ 190.882883] Enabling non-boot CPUs ...
May 9 13:47:54 vasquez kernel: [ 190.899022] SMP alternatives: switching
to SMP code
May 9 13:47:54 vasquez kernel: [ 190.900485] Booting processor 1/2 APIC
0x1
May 9 13:47:54 vasquez kernel: [ 194.664936] Initializing CPU#1
May 9 13:47:54 vasquez kernel: [ 194.664936] Calibrating delay using timer
specific routine.. 4389.13 BogoMIPS (lpj=8778263)
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L1 I cache: 32K, L1 D
cache: 32K
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L2 cache: 4096K
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU 1/1 -> Node 0
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Physical Processor ID: 0
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Processor Core ID: 1
May 9 13:47:54 vasquez kernel: [ 194.664936] Intel(R) Core(TM)2 Duo CPU
T7500 @ 2.20GHz stepping 0a
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU1 is up
May 9 13:47:54 vasquez kernel: [ 191.057619] ACPI: PCI Interrupt
0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
May 9 13:47:54 vasquez kernel: [ 191.057675] usb usb3: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.057706] ACPI: PCI Interrupt
0000:00:1a.1[b] -> GSI 17 (level, low) -> IRQ 17
May 9 13:47:54 vasquez kernel: [ 191.057758] usb usb4: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.070907] ACPI: PCI Interrupt
0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 191.086954] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
May 9 13:47:54 vasquez kernel: [ 191.087263] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May 9 13:47:54 vasquez kernel: [ 191.087314] usb usb5: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.087332] ACPI: PCI Interrupt
0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 191.087383] usb usb6: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.087401] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 191.087452] usb usb7: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.102905] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May 9 13:47:54 vasquez kernel: [ 191.103077] ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 192.139041] ACPI: PCI Interrupt
0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 192.163084] ACPI: PCI Interrupt
0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 192.431018] ata2: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 192.431042] ata3: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.183266] sky2 eth1: enabling interface
May 9 13:47:54 vasquez kernel: [ 193.295113] ACPI: PCI Interrupt
0000:06:01.1[b] -> GSI 17 (level, low) -> IRQ 17
May 9 13:47:54 vasquez kernel: [ 193.295138] ricoh-mmc: Resuming.
May 9 13:47:54 vasquez kernel: [ 193.295153] ricoh-mmc: Controller is now
disabled.
May 9 13:47:54 vasquez kernel: [ 193.487075] ata4: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.883091] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.896966] ata1.00: configured for
UDMA/100
May 9 13:47:54 vasquez kernel: [ 193.911174] sd 0:0:0:0: [sda] 312581808
512-byte hardware sectors (160042 MB)
May 9 13:47:54 vasquez kernel: [ 193.911213] sd 0:0:0:0: [sda] Write
Protect is off
May 9 13:47:54 vasquez kernel: [ 193.911282] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 9 13:47:54 vasquez kernel: [ 193.943126] sd 0:0:0:0: [sda] Starting
disk
May 9 13:47:54 vasquez kernel: [ 194.656742] hda: UDMA/33 mode selected
May 9 13:47:54 vasquez kernel: [ 194.672205] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May 9 13:47:54 vasquez kernel: [ 194.676906] sky2 eth1: Link is up at 100
Mbps, full duplex, flow control rx
May 9 13:47:54 vasquez kernel: [ 194.680135] Restarting tasks ... <6>usb
2-6: USB disconnect, address 3
May 9 13:47:54 vasquez kernel: [ 194.873866] done.
May 9 13:47:54 vasquez kernel: [ 194.964158] usb 2-6: new high speed USB
device using ehci_hcd and address 4
May 9 13:47:54 vasquez kernel: [ 195.115518] usb 2-6: configuration #1
chosen from 1 choice
May 9 13:47:54 vasquez kernel: [ 195.116834] usb 2-6: New USB device
found, idVendor=05e3, idProduct=0503
May 9 13:47:54 vasquez kernel: [ 195.116842] usb 2-6: New USB device
strings: Mfr=0, Product=1, SerialNumber=0
May 9 13:47:54 vasquez kernel: [ 195.116846] usb 2-6: Product: USB 2.0 PC
Camera
May 9 13:47:54 vasquez kernel: [ 195.116869] usb 3-1: USB disconnect,
address 2
May 9 13:47:54 vasquez kernel: [ 195.243471] usb 4-2: USB disconnect,
address 2
May 9 13:47:55 vasquez kernel: [ 195.519460] usb 4-2: new low speed USB
device using uhci_hcd and address 3
May 9 13:47:55 vasquez kernel: [ 195.760952] usb 4-2: configuration #1
chosen from 1 choice
May 9 13:47:55 vasquez kernel: [ 195.779452] input: Microsoft Microsoft
3-Button Mouse with IntelliEye(TM) as /class/input/input10
May 9 13:47:55 vasquez kernel: [ 195.838743] input,hidraw0: USB HID v1.10
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1a.1-2
May 9 13:47:55 vasquez kernel: [ 195.838856] usb 4-2: New USB device
found, idVendor=045e, idProduct=0040
May 9 13:47:55 vasquez kernel: [ 195.838860] usb 4-2: New USB device
strings: Mfr=1, Product=3, SerialNumber=0
May 9 13:47:55 vasquez kernel: [ 195.838864] usb 4-2: Product: Microsoft
3-Button Mouse with IntelliEye(TM)
May 9 13:47:55 vasquez kernel: [ 195.838868] usb 4-2: Manufacturer:
Microsoft
May 9 13:47:55 vasquez kernel: [ 195.838914] usb 7-1: USB disconnect,
address 2
May 9 13:47:55 vasquez kernel: [ 196.326301] usb 7-1: new full speed USB
device using uhci_hcd and address 3
May 9 13:47:56 vasquez kernel: [ 196.569375] usb 7-1: configuration #1
chosen from 1 choice
May 9 13:47:56 vasquez kernel: [ 196.576060] usb 7-1: New USB device
found, idVendor=0b05, idProduct=1712
May 9 13:47:56 vasquez kernel: [ 196.576075] usb 7-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=3
May 9 13:47:56 vasquez kernel: [ 196.576083] usb 7-1: SerialNumber:
0194E8-5B-0002
May 9 13:47:56 vasquez kernel: [ 197.057371] usb 3-1: new full speed USB
device using uhci_hcd and address 3
May 9 13:47:56 vasquez kernel: [ 197.235641] usb 3-1: configuration #1
chosen from 1 choice
May 9 13:47:56 vasquez kernel: [ 201.123983] usb 3-1: New USB device
found, idVendor=147e, idProduct=2016
May 9 13:47:56 vasquez kernel: [ 201.123993] usb 3-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
May 9 13:47:56 vasquez kernel: [ 201.123997] usb 3-1: Product: Fingerprint
Sensor
May 9 13:47:56 vasquez kernel: [ 201.124000] usb 3-1: Manufacturer:
TouchStrip

> if that doesn't work please report upstream in bugzilla.kernel.org
> and let us know the bug nr.

I will look for similar bugs there and if I can't find anything I'll report
back here. Thanks!
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f

Sponsor:
VINCI UNA CITROEN C1!
Scopri il nuovo concorso Best Western, gioca e vinci buoni sconto per i tuoi
soggiorni in hotel ? in palio anche una Citroen C1!
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7800&d=20080509

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 12:19 PM

hello jack,

On Fri, May 09, 2008 at 01:52:46PM +0200, Jack Malmostoso wrote:
>
> > how do you suspend?
>
> I just close the lid of the laptop.
> Just to complete information:
>
> jack@vasquez:~$ lspci | grep -i audio
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> Controller (rev 03)

hmm i have 2.6.25-rc1 + git4 running fine on my x61s you could test it
too -> http://photon.itp.tuwien.ac.at/~mattems/

> > did you try:
> > echo mem > /sys/power/state
>
> I did and the machine went properly in sleep. When I woke it up, this is all
> I could find in /var/log/messages:

looks good, just not much seen from the sound card.
i'd guess sound was silent still?

best regards

--
maks

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 10:24 PM

On Fri, 2008-05-09 at 14:19 +0200, maximilian attems wrote:
> hmm i have 2.6.25-rc1 + git4 running fine on my x61s you could test it
> too -> http://photon.itp.tuwien.ac.at/~mattems/

Hello Maximilian,

I did a couple more tests with both your 2.6.26-rc1 and vanilla
2.6.25.2. The latter is compiled using the .config from 2.6.25-1-amd64
from Debian. Additionally, I report the output in /var/log/messages from
2.6.24-1-amd64.

Test metodology:
1) Boot the machine (Asus Z37E running Sid)
2) Start a media player (in my case Banshee)
3) Play a song
4) Pause the song
5) Close the lid to suspend
6) Resume
7) Press play again

2.6.24-1-amd64: sound comes back after the resume.

May 9 23:58:04 vasquez gnome-power-manager: (jack) Suspending computer.
Reason: The lid has been closed on battery power.
May 9 23:58:08 vasquez kernel: sky2 eth1: disabling interface
May 9 23:58:36 vasquez kernel: Syncing filesystems ... done.
May 9 23:58:36 vasquez kernel: Freezing user space processes ...
(elapsed 0.00 seconds) done.
May 9 23:58:36 vasquez kernel: Freezing remaining freezable tasks ...
(elapsed 0.00 seconds) done.
May 9 23:58:36 vasquez kernel: Suspending console(s)
May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Stopping disk
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:06:01.1 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:02:00.0 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1d.7 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1d.2 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1d.1 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1d.0 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1b.0 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1a.7 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1a.1 disabled
May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device
0000:00:1a.0 disabled
May 9 23:58:36 vasquez kernel: Disabling non-boot CPUs ...
May 9 23:58:36 vasquez kernel: CPU 1 is now offline
May 9 23:58:36 vasquez kernel: SMP alternatives: switching to UP code
May 9 23:58:36 vasquez kernel: CPU1 is down
May 9 23:58:36 vasquez kernel: Enabling non-boot CPUs ...
May 9 23:58:36 vasquez kernel: SMP alternatives: switching to SMP code
May 9 23:58:36 vasquez kernel: Booting processor 1/2 APIC 0x1
May 9 23:58:36 vasquez kernel: Initializing CPU#1
May 9 23:58:36 vasquez kernel: Calibrating delay using timer specific
routine.. 4388.84 BogoMIPS (lpj=8777699)
May 9 23:58:36 vasquez kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 9 23:58:36 vasquez kernel: CPU: L2 cache: 4096K
May 9 23:58:36 vasquez kernel: CPU 1/1 -> Node 0
May 9 23:58:36 vasquez kernel: CPU: Physical Processor ID: 0
May 9 23:58:36 vasquez kernel: CPU: Processor Core ID: 1
May 9 23:58:36 vasquez kernel: Intel(R) Core(TM)2 Duo CPU T7500 @
2.20GHz stepping 0a
May 9 23:58:36 vasquez kernel: CPU1 is up
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:02.0[A] ->
GSI 16 (level, low) -> IRQ 16
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] ->
GSI 16 (level, low) -> IRQ 16
May 9 23:58:36 vasquez kernel: usb usb1: root hub lost power or was
reset
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.1[b] ->
GSI 17 (level, low) -> IRQ 17
May 9 23:58:36 vasquez kernel: usb usb2: root hub lost power or was
reset
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] ->
GSI 18 (level, low) -> IRQ 18
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] ->
GSI 21 (level, low) -> IRQ 21
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 23 (level, low) -> IRQ 23
May 9 23:58:36 vasquez kernel: usb usb3: root hub lost power or was
reset
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] ->
GSI 19 (level, low) -> IRQ 19
May 9 23:58:36 vasquez kernel: usb usb4: root hub lost power or was
reset
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 18 (level, low) -> IRQ 18
May 9 23:58:36 vasquez kernel: usb usb5: root hub lost power or was
reset
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 23 (level, low) -> IRQ 23
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] ->
GSI 19 (level, low) -> IRQ 19
May 9 23:58:36 vasquez kernel: Coming out of suspend...
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:02:00.0[A] ->
GSI 19 (level, low) -> IRQ 19
May 9 23:58:36 vasquez kernel: ata2: SATA link down (SStatus 0 SControl
300)
May 9 23:58:36 vasquez kernel: ata3: SATA link down (SStatus 0 SControl
300)
May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:06:01.1[b] ->
GSI 17 (level, low) -> IRQ 17
May 9 23:58:36 vasquez kernel: ata4: SATA link down (SStatus 0 SControl
300)
May 9 23:58:36 vasquez kernel: ata1: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
May 9 23:58:36 vasquez kernel: ata1.00: configured for UDMA/100
May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042 MB)
May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Write Protect is off
May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Starting disk
May 9 23:58:36 vasquez kernel: hda: UDMA/33 mode selected
May 9 23:58:36 vasquez kernel: Restarting tasks ... <6>usb 1-1: USB
disconnect, address 3
May 9 23:58:36 vasquez kernel: done.
May 9 23:58:36 vasquez gnome-power-manager: (jack) Resuming computer
May 9 23:58:36 vasquez kernel: usb 5-1: USB disconnect, address 3
May 9 23:58:37 vasquez kernel: usb 5-1: new full speed USB device using
uhci_hcd and address 4
May 9 23:58:37 vasquez kernel: usb 5-1: configuration #1 chosen from 1
choice
May 9 23:58:37 vasquez kernel: usb 7-6: USB disconnect, address 3
May 9 23:58:38 vasquez kernel: usb 7-6: new high speed USB device using
ehci_hcd and address 4
May 9 23:58:38 vasquez kernel: ADDRCONF(NETDEV_UP): wlan0: link is not
ready
May 9 23:58:38 vasquez kernel: sky2 eth1: enabling interface
May 9 23:58:38 vasquez kernel: ADDRCONF(NETDEV_UP): eth1: link is not
ready
May 9 23:58:38 vasquez kernel: usb 7-6: configuration #1 chosen from 1
choice
May 9 23:58:38 vasquez kernel: usb 1-1: new full speed USB device using
uhci_hcd and address 4
May 9 23:58:38 vasquez kernel: usb 1-1: configuration #1 chosen from 1
choice

2.6.25.2: No sound after resume.

May 10 00:08:33 vasquez gnome-power-manager: (jack) Suspending computer.
Reason: The lid has been closed on battery power.
May 10 00:08:38 vasquez kernel: [ 114.683194] ACPI: PCI interrupt for
device 0000:03:00.0 disabled
May 10 00:08:57 vasquez kernel: [ 114.693236] PM: Syncing
filesystems ... done.
May 10 00:08:57 vasquez kernel: [ 114.694303] Freezing user space
processes ... <6>sky2 eth1: disabling interface
May 10 00:08:57 vasquez kernel: [ 114.708135] (elapsed 0.01 seconds)
done.
May 10 00:08:57 vasquez kernel: [ 114.708141] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
May 10 00:08:57 vasquez kernel: [ 114.708224] Suspending console(s)
May 10 00:08:57 vasquez kernel: [ 114.708729] ACPI: PCI interrupt for
device 0000:00:02.0 disabled
May 10 00:08:57 vasquez kernel: [ 114.773747] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
May 10 00:08:57 vasquez kernel: [ 114.854698] sd 0:0:0:0: [sda]
Stopping disk
May 10 00:08:57 vasquez kernel: [ 118.424057] ricoh-mmc: Suspending.
May 10 00:08:57 vasquez kernel: [ 118.424078] ricoh-mmc: Controller is
now re-enabled.
May 10 00:08:57 vasquez kernel: [ 118.424145] ACPI: PCI interrupt for
device 0000:06:01.1 disabled
May 10 00:08:57 vasquez kernel: [ 118.494410] ACPI: PCI interrupt for
device 0000:02:00.0 disabled
May 10 00:08:57 vasquez kernel: [ 118.589578] ACPI: PCI interrupt for
device 0000:00:1f.1 disabled
May 10 00:08:57 vasquez kernel: [ 118.589700] ACPI: PCI interrupt for
device 0000:00:1d.7 disabled
May 10 00:08:57 vasquez kernel: [ 118.608346] ACPI: PCI interrupt for
device 0000:00:1d.2 disabled
May 10 00:08:57 vasquez kernel: [ 118.608379] ACPI: PCI interrupt for
device 0000:00:1d.1 disabled
May 10 00:08:57 vasquez kernel: [ 118.608411] ACPI: PCI interrupt for
device 0000:00:1d.0 disabled
May 10 00:08:57 vasquez kernel: [ 118.640233] ACPI: PCI interrupt for
device 0000:00:1b.0 disabled
May 10 00:08:57 vasquez kernel: [ 118.656209] ACPI: PCI interrupt for
device 0000:00:1a.7 disabled
May 10 00:08:57 vasquez kernel: [ 118.672164] ACPI: PCI interrupt for
device 0000:00:1a.1 disabled
May 10 00:08:57 vasquez kernel: [ 118.672197] ACPI: PCI interrupt for
device 0000:00:1a.0 disabled
May 10 00:08:57 vasquez kernel: [ 118.676111] ACPI: Preparing to enter
system sleep state S3
May 10 00:08:57 vasquez kernel: [ 118.678263] Disabling non-boot
CPUs ...
May 10 00:08:57 vasquez kernel: [ 116.342593] CPU 1 is now offline
May 10 00:08:57 vasquez kernel: [ 116.342597] SMP alternatives:
switching to UP code
May 10 00:08:57 vasquez kernel: [ 116.344740] CPU1 is down
May 10 00:08:57 vasquez kernel: [ 116.345083] Enabling non-boot
CPUs ...
May 10 00:08:57 vasquez kernel: [ 116.354737] SMP alternatives:
switching to SMP code
May 10 00:08:57 vasquez kernel: [ 116.356121] Booting processor 1/2
APIC 0x1
May 10 00:08:57 vasquez kernel: [ 118.690543] Initializing CPU#1
May 10 00:08:57 vasquez kernel: [ 118.692089] Calibrating delay using
timer specific routine.. 4389.11 BogoMIPS (lpj=8778236)
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: L1 I cache: 32K, L1
D cache: 32K
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: L2 cache: 4096K
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU 1/1 -> Node 0
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: Physical Processor
ID: 0
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: Processor Core ID: 1
May 10 00:08:57 vasquez kernel: [ 118.692089] Intel(R) Core(TM)2 Duo
CPU T7500 @ 2.20GHz stepping 0a
May 10 00:08:57 vasquez kernel: [ 118.692089] CPU1 is up
May 10 00:08:57 vasquez kernel: [ 118.756335] ACPI: PCI Interrupt
0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
May 10 00:08:57 vasquez kernel: [ 118.756391] usb usb1: root hub lost
power or was reset
May 10 00:08:57 vasquez kernel: [ 118.756413] ACPI: PCI Interrupt
0000:00:1a.1[b] -> GSI 17 (level, low) -> IRQ 17
May 10 00:08:57 vasquez kernel: [ 118.756468] usb usb2: root hub lost
power or was reset
May 10 00:08:57 vasquez kernel: [ 118.771323] ACPI: PCI Interrupt
0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
May 10 00:08:57 vasquez kernel: [ 118.787275] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
May 10 00:08:57 vasquez kernel: [ 118.890048] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May 10 00:08:57 vasquez kernel: [ 118.890119] usb usb3: root hub lost
power or was reset
May 10 00:08:57 vasquez kernel: [ 118.890141] ACPI: PCI Interrupt
0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
May 10 00:08:57 vasquez kernel: [ 118.890212] usb usb4: root hub lost
power or was reset
May 10 00:08:57 vasquez kernel: [ 118.890234] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 10 00:08:57 vasquez kernel: [ 118.890307] usb usb5: root hub lost
power or was reset
May 10 00:08:57 vasquez kernel: [ 118.904675] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May 10 00:08:57 vasquez kernel: [ 118.904861] ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(dsopcode-0483): Attempt to CreateField of length zero [20070126]
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA]
(Node ffff81007f360630), AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node ffff81007f360850),
AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.657725] ata6.00: _GTF evaluation
failed (AE 0x3006)
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(dsopcode-0483): Attempt to CreateField of length zero [20070126]
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA]
(Node ffff81007f360630), AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error
(psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.CHN1.DRV1._GTF] (Node ffff81007f3607f0),
AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.657725] ata6.01: _GTF evaluation
failed (AE 0x3006)
May 10 00:08:57 vasquez kernel: [ 116.659530] ACPI Error
(dsopcode-0483): Attempt to CreateField of length zero [20070126]
May 10 00:08:57 vasquez kernel: [ 116.659537] ACPI Error
(psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA]
(Node ffff81007f360630), AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.659588] ACPI Error
(psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node ffff81007f360930),
AE_AML_OPERAND_VALUE
May 10 00:08:57 vasquez kernel: [ 116.659639] ata5.01: _GTF evaluation
failed (AE 0x3006)
May 10 00:08:57 vasquez kernel: [ 116.977678] ata5.00: ACPI cmd
ef/03:42:00:00:00:a0 filtered out
May 10 00:08:57 vasquez kernel: [ 116.977683] ata5.00: ACPI cmd
ef/03:0c:00:00:00:a0 filtered out
May 10 00:08:57 vasquez kernel: [ 117.149302] ata5.00: configured for
UDMA/33
May 10 00:08:57 vasquez kernel: [ 119.958036] ACPI: PCI Interrupt
0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
May 10 00:08:57 vasquez kernel: [ 117.983176] ata2: SATA link down
(SStatus 0 SControl 300)
May 10 00:08:57 vasquez kernel: [ 117.983191] ata3: SATA link down
(SStatus 0 SControl 300)
May 10 00:08:57 vasquez kernel: [ 121.087307] ACPI: PCI Interrupt
0000:06:01.1[b] -> GSI 17 (level, low) -> IRQ 17
May 10 00:08:57 vasquez kernel: [ 121.087327] ricoh-mmc: Resuming.
May 10 00:08:57 vasquez kernel: [ 121.087336] ricoh-mmc: Controller is
now disabled.
May 10 00:08:57 vasquez kernel: [ 119.020945] ata4: SATA link down
(SStatus 0 SControl 300)
May 10 00:08:57 vasquez kernel: [ 119.360606] ata1: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
May 10 00:08:57 vasquez kernel: [ 119.406146] ata1.00: configured for
UDMA/100
May 10 00:08:57 vasquez kernel: [ 119.421488] sd 0:0:0:0: [sda]
312581808 512-byte hardware sectors (160042 MB)
May 10 00:08:57 vasquez kernel: [ 119.421509] sd 0:0:0:0: [sda] Write
Protect is off
May 10 00:08:57 vasquez kernel: [ 119.421544] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 10 00:08:57 vasquez kernel: [ 120.150874] sd 0:0:0:0: [sda]
Starting disk
May 10 00:08:57 vasquez kernel: [ 120.190856] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May 10 00:08:57 vasquez kernel: [ 120.192385] Restarting tasks ...
<6>usb 1-1: USB disconnect, address 3
May 10 00:08:57 vasquez kernel: [ 120.198546] done.
May 10 00:08:57 vasquez kernel: [ 120.322890] usb 5-1: USB disconnect,
address 4
May 10 00:08:58 vasquez kernel: [ 122.937201] ACPI: PCI Interrupt
0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May 10 00:08:58 vasquez kernel: [ 120.794857] usb 5-1: new full speed
USB device using uhci_hcd and address 5
May 10 00:08:58 vasquez kernel: [ 123.151640] ADDRCONF(NETDEV_UP):
wlan0: link is not ready
May 10 00:08:58 vasquez kernel: [ 123.165557] sky2 eth1: enabling
interface
May 10 00:08:58 vasquez kernel: [ 123.169193] ADDRCONF(NETDEV_UP):
eth1: link is not ready
May 10 00:08:58 vasquez kernel: [ 121.039190] usb 5-1: configuration #1
chosen from 1 choice
May 10 00:08:58 vasquez kernel: [ 121.053440] usb 5-1: New USB device
found, idVendor=0b05, idProduct=1712
May 10 00:08:58 vasquez kernel: [ 121.053449] usb 5-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=3
May 10 00:08:58 vasquez kernel: [ 121.053452] usb 5-1: SerialNumber:
0194E8-5B-0002
May 10 00:08:58 vasquez kernel: [ 121.178890] usb 7-6: USB disconnect,
address 3
May 10 00:08:58 vasquez kernel: [ 121.290894] usb 7-6: new high speed
USB device using ehci_hcd and address 4
May 10 00:08:58 vasquez kernel: [ 121.444660] usb 7-6: configuration #1
chosen from 1 choice
May 10 00:08:58 vasquez kernel: [ 121.445340] usb 7-6: New USB device
found, idVendor=05e3, idProduct=0503
May 10 00:08:58 vasquez kernel: [ 121.445349] usb 7-6: New USB device
strings: Mfr=0, Product=1, SerialNumber=0
May 10 00:08:58 vasquez kernel: [ 121.445353] usb 7-6: Product: USB 2.0
PC Camera
May 10 00:08:59 vasquez kernel: [ 121.923572] usb 1-1: new full speed
USB device using uhci_hcd and address 4
May 10 00:08:59 vasquez kernel: [ 122.097351] usb 1-1: configuration #1
chosen from 1 choice
May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: New USB device
found, idVendor=147e, idProduct=2016
May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: Product:
Fingerprint Sensor
May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: Manufacturer:
TouchStrip
May 10 00:09:00 vasquez gnome-power-manager: (jack) Resuming computer

2.6.26-rc1: No sound after resume.

May 10 00:03:54 vasquez gnome-power-manager: (jack) Suspending computer.
Reason: The lid has been closed on battery power.
May 10 00:03:59 vasquez kernel: [17180810.540119] ACPI: PCI interrupt
for device 0000:03:00.0 disabled
May 10 00:03:59 vasquez kernel: [17180810.566171] sky2 eth1: disabling
interface
May 10 00:04:26 vasquez kernel: [17180811.311417] PM: Syncing
filesystems ... done.
May 10 00:04:26 vasquez kernel: [17180812.886830] Freezing user space
processes ... (elapsed 0.00 seconds) done.
May 10 00:04:26 vasquez kernel: [17180812.890656] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
May 10 00:04:26 vasquez kernel: [17180812.890656] Suspending console(s)
May 10 00:04:26 vasquez kernel: [17180812.890656] ACPI: PCI interrupt
for device 0000:00:02.0 disabled
May 10 00:04:26 vasquez kernel: [17180812.906722] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
May 10 00:04:26 vasquez kernel: [17180813.187890] sd 0:0:0:0: [sda]
Stopping disk
May 10 00:04:26 vasquez kernel: [17180814.523805] ricoh-mmc: Suspending.
May 10 00:04:26 vasquez kernel: [17180814.523825] ricoh-mmc: Controller
is now re-enabled.
May 10 00:04:26 vasquez kernel: [17180814.524927] ACPI: PCI interrupt
for device 0000:06:01.1 disabled
May 10 00:04:26 vasquez kernel: [17180814.598986] ACPI: PCI interrupt
for device 0000:02:00.0 disabled
May 10 00:04:26 vasquez kernel: [17180814.695693] ACPI: PCI interrupt
for device 0000:00:1d.7 disabled
May 10 00:04:26 vasquez kernel: [17180814.711569] ACPI: PCI interrupt
for device 0000:00:1d.2 disabled
May 10 00:04:26 vasquez kernel: [17180814.711602] ACPI: PCI interrupt
for device 0000:00:1d.1 disabled
May 10 00:04:26 vasquez kernel: [17180814.711635] ACPI: PCI interrupt
for device 0000:00:1d.0 disabled
May 10 00:04:26 vasquez kernel: [17180814.743421] ACPI: PCI interrupt
for device 0000:00:1b.0 disabled
May 10 00:04:26 vasquez kernel: [17180814.759434] ACPI: PCI interrupt
for device 0000:00:1a.7 disabled
May 10 00:04:26 vasquez kernel: [17180814.775399] ACPI: PCI interrupt
for device 0000:00:1a.1 disabled
May 10 00:04:26 vasquez kernel: [17180814.775432] ACPI: PCI interrupt
for device 0000:00:1a.0 disabled
May 10 00:04:26 vasquez kernel: [17180814.776005] ACPI: Preparing to
enter system sleep state S3
May 10 00:04:26 vasquez kernel: [17180814.776884] Disabling non-boot
CPUs ...
May 10 00:04:26 vasquez kernel: [17180814.892086] CPU 1 is now offline
May 10 00:04:26 vasquez kernel: [17180814.892090] SMP alternatives:
switching to UP code
May 10 00:04:26 vasquez kernel: [17180814.902131] CPU1 is down
May 10 00:04:26 vasquez kernel: [17180814.902131] x86: PAT support
disabled.
May 10 00:04:26 vasquez kernel: [17180814.902890] Enabling non-boot
CPUs ...
May 10 00:04:26 vasquez kernel: [17180814.912805] SMP alternatives:
switching to SMP code
May 10 00:04:26 vasquez kernel: [17180814.923272] Booting processor 1/1
ip 6000
May 10 00:04:26 vasquez kernel: [17180814.932609] Initializing CPU#1
May 10 00:04:26 vasquez kernel: [17180814.932609] Calibrating delay
using timer specific routine.. 4389.10 BogoMIPS (lpj=8778207)
May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: L1 I cache: 32K,
L1 D cache: 32K
May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: L2 cache: 4096K
May 10 00:04:26 vasquez kernel: [17180814.932609] CPU 1/1 -> Node 0
May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: Physical
Processor ID: 0
May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: Processor Core
ID: 1
May 10 00:04:26 vasquez kernel: [17180814.932609] x86: PAT support
disabled.
May 10 00:04:26 vasquez kernel: [17180815.014036] CPU1: Intel(R)
Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
May 10 00:04:26 vasquez kernel: [17180814.932610] CPU1 is up
May 10 00:04:26 vasquez kernel: [17180815.067294] ACPI: EC: non-query
interrupt received, switching to interrupt mode
May 10 00:04:26 vasquez kernel: [17180815.176812] ACPI: PCI Interrupt
0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
May 10 00:04:26 vasquez kernel: [17180815.176868] usb usb1: root hub
lost power or was reset
May 10 00:04:26 vasquez kernel: [17180815.176890] ACPI: PCI Interrupt
0000:00:1a.1[b] -> GSI 17 (level, low) -> IRQ 17
May 10 00:04:26 vasquez kernel: [17180815.176946] usb usb2: root hub
lost power or was reset
May 10 00:04:26 vasquez kernel: [17180815.194665] ACPI: PCI Interrupt
0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
May 10 00:04:26 vasquez kernel: [17180815.210666] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
May 10 00:04:26 vasquez kernel: [17180815.307150] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May 10 00:04:26 vasquez kernel: [17180815.307220] usb usb3: root hub
lost power or was reset
May 10 00:04:26 vasquez kernel: [17180815.307241] ACPI: PCI Interrupt
0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
May 10 00:04:26 vasquez kernel: [17180815.307306] usb usb4: root hub
lost power or was reset
May 10 00:04:26 vasquez kernel: [17180815.307327] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 10 00:04:26 vasquez kernel: [17180815.307392] usb usb5: root hub
lost power or was reset
May 10 00:04:26 vasquez kernel: [17180815.321853] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May 10 00:04:26 vasquez kernel: [17180815.322028] ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
May 10 00:04:26 vasquez kernel: [17180816.375364] ACPI: PCI Interrupt
0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
May 10 00:04:26 vasquez kernel: [17180816.663085] ata3: SATA link down
(SStatus 0 SControl 300)
May 10 00:04:26 vasquez kernel: [17180816.663113] ata2: SATA link down
(SStatus 0 SControl 300)
May 10 00:04:26 vasquez kernel: [17180817.510084] ACPI: PCI Interrupt
0000:06:01.1[b] -> GSI 17 (level, low) -> IRQ 17
May 10 00:04:26 vasquez kernel: [17180817.511104] ricoh-mmc: Resuming.
May 10 00:04:26 vasquez kernel: [17180817.511114] ricoh-mmc: Controller
is now disabled.
May 10 00:04:26 vasquez kernel: [17180817.703842] ata4: SATA link down
(SStatus 0 SControl 300)
May 10 00:04:26 vasquez kernel: [17180818.012259] ata1: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
May 10 00:04:26 vasquez kernel: [17180818.025933] ata1.00: configured
for UDMA/100
May 10 00:04:26 vasquez kernel: [17180818.026008] sd 0:0:0:0: [sda]
312581808 512-byte hardware sectors (160042 MB)
May 10 00:04:26 vasquez kernel: [17180818.026031] sd 0:0:0:0: [sda]
Write Protect is off
May 10 00:04:26 vasquez kernel: [17180818.026069] sd 0:0:0:0: [sda]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 10 00:04:26 vasquez kernel: [17180819.233925] usb 1-1: reset full
speed USB device using uhci_hcd and address 3
May 10 00:04:26 vasquez kernel: [17180819.517932] usb 7-6: reset high
speed USB device using ehci_hcd and address 3
May 10 00:04:26 vasquez kernel: [17180819.789929] usb 5-1: reset full
speed USB device using uhci_hcd and address 3
May 10 00:04:26 vasquez kernel: [17180820.011132] hci_usb 5-1:1.0: no
reset_resume for driver hci_usb?
May 10 00:04:26 vasquez kernel: [17180820.011136] hci_usb 5-1:1.1: no
reset_resume for driver hci_usb?
May 10 00:04:26 vasquez kernel: [17180820.011149] sd 0:0:0:0: [sda]
Starting disk
May 10 00:04:26 vasquez kernel: [17180820.045841] hda: UDMA/33 mode
selected
May 10 00:04:26 vasquez kernel: [17180820.062296] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May 10 00:04:26 vasquez kernel: [17180820.064265] Restarting tasks ...
done.
May 10 00:04:26 vasquez gnome-power-manager: (jack) Resuming computer
May 10 00:04:26 vasquez kernel: [17180820.225064] ACPI: PCI Interrupt
0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May 10 00:04:27 vasquez kernel: [17180820.446423] Registered led device:
iwl-phy0:radio
May 10 00:04:27 vasquez kernel: [17180820.446488] Registered led device:
iwl-phy0:assoc
May 10 00:04:27 vasquez kernel: [17180820.446543] Registered led device:
iwl-phy0:RX
May 10 00:04:27 vasquez kernel: [17180820.446596] Registered led device:
iwl-phy0:TX
May 10 00:04:27 vasquez kernel: [17180820.485614] ADDRCONF(NETDEV_UP):
wlan0: link is not ready
May 10 00:04:27 vasquez kernel: [17180820.592371] sky2 eth1: enabling
interface
May 10 00:04:27 vasquez kernel: [17180820.595992] ADDRCONF(NETDEV_UP):
eth1: link is not ready

Sorry if the message is very long.
I couldn't find any similar reports in bugzilla.kernel.org, if you have
no more ideas I'll report it there too.
Thanks!

--
BOFH excuse #351: PEBKAC (Problem Exists Between Keyboard And Chair)

--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f

Sponsor:
CONCORSO BEST WESTERN
* Gioca e vinci! In palio ogni giorno buoni sconto da 50? per soggiorni in tutto il mondo ed estrazione finale di una Citroen C1
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7802&d=10-5

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-09-2008, 11:15 PM

On Sat, 10 May 2008, Jack Malmostoso wrote:

> Sorry if the message is very long.
> I couldn't find any similar reports in bugzilla.kernel.org, if you have
> no more ideas I'll report it there too.
> Thanks!

yes please file upstream as the regression persists with 2.6.26-rc1.
let us know the upstream bug number so that it can be marked forwarded.
-> bugzilla.kernel.org

(don't forget to attach lspci and dmesg output for upstream devs

thank you

--
maks

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-10-2008, 10:49 AM

Please confirm, (and say in upstream bug) that unloading/reloading the
snd_hda_intel driver makes the sound work again after a suspend-resume
cycle.

(using "rmmod snd_hda_intel" and "modprobe snd_hda_intel")

You need to kill all applications using your soundboard to be able to
rmmod snd_hda_intel.

Thanks,
--
Arnaud Cornet

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

05-10-2008, 12:19 PM

I have filed bug #10662:

http://bugzilla.kernel.org/show_bug.cgi?id=10662

Arnaud: I couldn't find which application was blocking snd_hda_intel so
I didn't add that information to the bug report. If you can, please
comment on the upstream bug.

--
"Jesus died to take our wibbles away, so now we can go to zonk."

--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f

Sponsor:
Motostorm.it vendita online di abbigliamento moto caschi ed accessori delle migliori marche a prezzi scontati
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7846&d=10-5

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org