Package: src:linux
Version: 3.2.23-1
Severity: normal


Hello,

When compiling a big .deb package, my machine started to heat quite a lot, and
after these messages throttling down [trying to?], it was shut down abruptly.
Kernel log retrieved from the previous boot.

Regards.


-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012

** Not tainted

** Kernel log:
[... Cut from before the shut down ...]
Oct 8 18:55:00 lugh kernel: [ 20.895863] eth0: no IPv6 routers present
Oct 8 20:15:52 lugh kernel: [ 4866.848215] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848219] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848223] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848227] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848230] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848233] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.849183] CPU1: Core temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849186] CPU3: Core temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849189] CPU2: Package temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849191] CPU0: Package temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849193] CPU3: Package temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849196] CPU1: Package temperature/speed normal
Oct 8 20:19:36 lugh kernel: [ 5090.303889] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
Oct 8 20:19:36 lugh kernel: [ 5090.303901] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303912] ACPI Error: Method parse/execution failed [ECRB] (Node ffff880129e7af60), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303918] ACPI Error: Method parse/execution failed [ECG5] (Node ffff880129e7ae48), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303924] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880129e7b790), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303935] ACPI Exception: AE_TIME, Error reading AC Adapter state (20110623/ac-118)
Oct 8 20:19:37 lugh kernel: [ 5090.803218] ACPI: EC: input buffer is not empty, aborting transaction
Oct 8 20:19:37 lugh kernel: [ 5090.803225] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
Oct 8 20:19:37 lugh kernel: [ 5090.803238] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803250] ACPI Error: Method parse/execution failed [ECBT] (Node ffff880129e7afb0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803258] ACPI Error: Method parse/execution failed [ECG2] (Node ffff880129e7aec0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803265] ACPI Error: Method parse/execution failed [ECG6] (Node ffff880129e7add0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803272] ACPI Error: Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff880129e7b628), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803285] ACPI Exception: AE_TIME, Evaluating _BST (20110623/battery-455)
Oct 8 20:20:14 lugh kernel: imklog 5.8.11, log source = /proc/kmsg started.
[...]

** Model information
sys_vendor: Dell Inc.
product_name: Latitude E5520
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 03PH4G
board_version: A01

** Loaded modules:
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
uinput
fuse
snd_hda_codec_hdmi
snd_hda_codec_idt
joydev
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
coretemp
crc32c_intel
snd_seq
psmouse
dell_laptop
ghash_clmulni_intel
dell_wmi
arc4
sparse_keymap
aesni_intel
aes_x86_64
aes_generic
cryptd
dcdbas
evdev
serio_raw
iwlwifi
i915
snd_seq_device
battery
parport_pc
parport
snd_timer
i2c_i801
mac80211
drm_kms_helper
snd
video
drm
i2c_algo_bit
i2c_core
wmi
iTCO_wdt
acpi_cpufreq
cfg80211
iTCO_vendor_support
mperf
ac
power_supply
soundcore
rfkill
button
processor
ext4
crc16
jbd2
mbcache
microcode
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ahci
libahci
firewire_ohci
libata
firewire_core
crc_itu_t
sdhci_pci
sdhci
mmc_core
thermal
thermal_sys
ehci_hcd
scsi_mod
tg3
libphy
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e1c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3d80000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e3d50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e3d40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: e3c00000-e3cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: e3100000-e3afffff
Prefetchable memory behind bridge: 00000000e1100000-00000000e1afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: e3b00000-e3bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=11, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: e2000000-e30fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e3d30000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 42
Region 0: I/O ports at 70b0 [size=8]
Region 1: I/O ports at 70a0 [size=4]
Region 2: I/O ports at 7090 [size=8]
Region 3: I/O ports at 7080 [size=4]
Region 4: I/O ports at 7060 [size=32]
Region 5: Memory at e3d20000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e3d10000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 7040 [size=32]

02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0082] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e3c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi

09:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host Controller [1217:13f7] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e3b30000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

09:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD controller [1217:8321] (rev 05) (prog-if 01)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at e3b20000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

09:00.2 Mass storage controller [0180]: O2 Micro, Inc. O2 Flash Memory Card [1217:8331] (rev 05)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e3b10000 (32-bit, non-prefetchable) [size=1K]
Region 2: Memory at e3b00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

0a:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e2010000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at e2000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1bcf:280b Sunplus Innovation Technology Inc.


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.108
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2

Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1

Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20121008193843.3205.93511.reportbug@lugh.itsari.or g">http://lists.debian.org/20121008193843.3205.93511.reportbug@lugh.itsari.or g