Bug#689268: Intel HD 4000 (Ivy Bridge) graphics freeze - Page 2

10-02-2012, 12:02 AM

Per Foreby <per@foreby.se> writes:
> On 2012-10-02 00:45, Bjørn Mork wrote:
>
>> I believe the bug is in the dmesg utility. It should shift all values
>> by one. Setting "dmesg -n debug" will currently log all messages with a
>> level *higher* than debug.
>
> You're probably right about the bug. I don't know what the four values
> in /proc/sys/kernel/printk are, but the first value was 7, not 8:
>
> # cat /proc/sys/kernel/printk
> 7 4 1 7
> # echo 8 > /proc/sys/kernel/printk
> # cat /proc/sys/kernel/printk
> 8 4 1 7

>From Documentation/sysctl/kernel.txt :
<quote>

printk:

The four values in printk denote: console_loglevel,
default_message_loglevel, minimum_console_loglevel and
default_console_loglevel respectively.

These values influence printk() behavior when printing or
logging error messages. See 'man 2 syslog' for more info on
the different loglevels.

- console_loglevel: messages with a higher priority than
this will be printed to the console
- default_message_loglevel: messages without an explicit priority
will be printed with this priority
- minimum_console_loglevel: minimum (highest) value to which
console_loglevel can be set
- default_console_loglevel: default value for console_loglevel

</quote>

> However, this did not affect the remote logging, so I'm back to the
> remote syslog approach.

Odd. Then there are other issues I don't understand here.

But the dmesg bug is quite obvious, so I sent off a fix upstream. The
bug was introduced with the support for level names in July 2011.

Bjørn

>
> /Per

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87wqz9spvc.fsf@nemi.mork.no">http://lists.debian.org/87wqz9spvc.fsf@nemi.mork.no

10-05-2012, 12:25 AM

Per Foreby wrote:

> I just had a freeze, the first one sinc sunday. Actually while browsing your
> comment

>
> Jonathan: netconsole didn't log anything interesting.

Thanks. Even the absence of output can be interesting; do you have the log
from that boot and freeze?

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20121005002541.GB12355@elie.Belkin

10-05-2012, 11:49 AM

Am 05.10.2012 02:25, schrieb Jonathan Nieder:
> Per Foreby wrote:
>
>> I just had a freeze, the first one sinc sunday. Actually while browsing your
>> comment

>>
>> Jonathan: netconsole didn't log anything interesting.
>
> Thanks. Even the absence of output can be interesting; do you have the log
> from that boot and freeze?
>

Here you get my /var/log/messages extract of the time
the PC was booted up (Sept. 27 12:58H)

until the hard crash happened just before 17:46h.

when I succeeded to hard reset the beginning of the boot process is
still included.

I did have another few crashes on Sept. 28 when searching for a
solution, but after the change in BIOS (agp aperture = 256MB) no more
crashes happended.

File is called "messages.before-crash".

If you need other logs, please let me know.

Good luck,
Ingo
Sep 27 12:53:35 tux shutdown[9720]: shutting down for system reboot
==========
booting up
==========

Sep 27 12:58:26 tux kernel: imklog 5.8.11, log source = /proc/kmsg started.
Sep 27 12:58:26 tux rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2385" x-info="http://www.rsyslog.com"] start
Sep 27 12:58:26 tux kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 27 12:58:26 tux kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 27 12:58:26 tux kernel: [ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
Sep 27 12:58:26 tux kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda2 ro enable_mtrr_cleanup
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000040005000 - 00000000d9e6d000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000d9e6d000 - 00000000da299000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da299000 - 00000000da2a5000 (ACPI data)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da2a5000 - 00000000da301000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da301000 - 00000000da306000 (ACPI data)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da306000 - 00000000da389000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da389000 - 00000000da41b000 (ACPI NVS)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da41b000 - 00000000da6af000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da6af000 - 00000000da6b0000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da6b0000 - 00000000da6f3000 (ACPI NVS)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000da6f3000 - 00000000db000000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Sep 27 12:58:26 tux kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000021f600000 (usable)
Sep 27 12:58:26 tux kernel: [ 0.000000] NX (Execute Disable) protection: active
Sep 27 12:58:26 tux kernel: [ 0.000000] DMI 2.7 present.
Sep 27 12:58:26 tux kernel: [ 0.000000] No AGP bridge found
Sep 27 12:58:26 tux kernel: [ 0.000000] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
Sep 27 12:58:26 tux kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 27 12:58:26 tux kernel: [ 0.000000] total RAM covered: 8110M
Sep 27 12:58:26 tux kernel: [ 0.000000] Found optimal setting for mtrr clean up
Sep 27 12:58:26 tux kernel: [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
Sep 27 12:58:26 tux kernel: [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
Sep 27 12:58:26 tux kernel: [ 0.000000] found SMP MP-table at [ffff8800000fd6b0] fd6b0
Sep 27 12:58:26 tux kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
Sep 27 12:58:26 tux kernel: [ 0.000000] init_memory_mapping: 0000000100000000-000000021f600000
Sep 27 12:58:26 tux kernel: [ 0.000000] RAMDISK: 36c14000 - 37602000
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 INTEL)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: XSDT 00000000da299070 00064 (v01 INTEL DH77EB 0000004B AMI 00010013)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: FACP 00000000da2a2fd0 000F4 (v04 INTEL DH77EB 0000004B AMI 00010013)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: DSDT 00000000da299168 09E68 (v02 INTEL DH77EB 00000075 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: FACS 00000000da419f80 00040
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: APIC 00000000da2a30c8 00072 (v03 INTEL DH77EB 0000004B AMI 00010013)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: FPDT 00000000da2a3140 00044 (v01 INTEL DH77EB 0000004B AMI 00010013)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: MCFG 00000000da2a3188 0003C (v01 INTEL DH77EB 0000004B MSFT 00000097)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: HPET 00000000da2a31c8 00038 (v01 INTEL DH77EB 0000004B AMI. 00000005)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: SSDT 00000000da2a3200 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: SSDT 00000000da2a3570 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: SSDT 00000000da2a3f20 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.000000] No NUMA configuration found
Sep 27 12:58:26 tux kernel: [ 0.000000] Faking a node at 0000000000000000-000000021f600000
Sep 27 12:58:26 tux kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000021f600000
Sep 27 12:58:26 tux kernel: [ 0.000000] NODE_DATA [000000021f5fb000 - 000000021f5fffff]
Sep 27 12:58:26 tux kernel: [ 0.000000] Zone PFN ranges:
Sep 27 12:58:26 tux kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Sep 27 12:58:26 tux kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Sep 27 12:58:26 tux kernel: [ 0.000000] Normal 0x00100000 -> 0x0021f600
Sep 27 12:58:26 tux kernel: [ 0.000000] Movable zone start PFN for each node
Sep 27 12:58:26 tux kernel: [ 0.000000] early_node_map[8] active PFN ranges
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009d
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x00000100 -> 0x00020000
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x00020200 -> 0x00040004
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x00040005 -> 0x000d9e6d
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x000da306 -> 0x000da389
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x000da6af -> 0x000da6b0
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x000da6f3 -> 0x000db000
Sep 27 12:58:26 tux kernel: [ 0.000000] 0: 0x00100000 -> 0x0021f600
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 27 12:58:26 tux kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 27 12:58:26 tux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Sep 27 12:58:26 tux kernel: [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Sep 27 12:58:26 tux kernel: [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000d9e6d000 - 00000000da299000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da299000 - 00000000da2a5000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da2a5000 - 00000000da301000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da301000 - 00000000da306000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da389000 - 00000000da41b000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da41b000 - 00000000da6af000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000da6b0000 - 00000000da6f3000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
Sep 27 12:58:26 tux kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Sep 27 12:58:26 tux kernel: [ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Sep 27 12:58:26 tux kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Sep 27 12:58:26 tux kernel: [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Sep 27 12:58:26 tux kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f200000 s82816 r8192 d23680 u524288
Sep 27 12:58:26 tux kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041000
Sep 27 12:58:26 tux kernel: [ 0.000000] Policy zone: Normal
Sep 27 12:58:26 tux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda2 ro enable_mtrr_cleanup
Sep 27 12:58:26 tux kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 27 12:58:26 tux kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Sep 27 12:58:26 tux kernel: [ 0.000000] Checking aperture...
Sep 27 12:58:26 tux kernel: [ 0.000000] No AGP bridge found
Sep 27 12:58:26 tux kernel: [ 0.000000] Memory: 8083788k/8902656k available (3409k kernel code, 616920k absent, 201948k reserved, 3324k data, 572k init)
Sep 27 12:58:26 tux kernel: [ 0.000000] Hierarchical RCU implementation.
Sep 27 12:58:26 tux kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Sep 27 12:58:26 tux kernel: [ 0.000000] NR_IRQS:33024 nr_irqs:712 16
Sep 27 12:58:26 tux kernel: [ 0.000000] Extended CMOS year: 2000
Sep 27 12:58:26 tux kernel: [ 0.000000] Console: colour VGA+ 80x25
Sep 27 12:58:26 tux kernel: [ 0.000000] console [tty0] enabled
Sep 27 12:58:26 tux kernel: [ 0.000000] Fast TSC calibration using PIT
Sep 27 12:58:26 tux kernel: [ 0.004000] Detected 3400.372 MHz processor.
Sep 27 12:58:26 tux kernel: [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.74 BogoMIPS (lpj=13601488)
Sep 27 12:58:26 tux kernel: [ 0.000114] pid_max: default: 32768 minimum: 301
Sep 27 12:58:26 tux kernel: [ 0.000194] Security Framework initialized
Sep 27 12:58:26 tux kernel: [ 0.000251] AppArmor: AppArmor disabled by boot time parameter
Sep 27 12:58:26 tux kernel: [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Sep 27 12:58:26 tux kernel: [ 0.002333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Sep 27 12:58:26 tux kernel: [ 0.003034] Mount-cache hash table entries: 256
Sep 27 12:58:26 tux kernel: [ 0.003160] Initializing cgroup subsys cpuacct
Sep 27 12:58:26 tux kernel: [ 0.003221] Initializing cgroup subsys memory
Sep 27 12:58:26 tux kernel: [ 0.003284] Initializing cgroup subsys devices
Sep 27 12:58:26 tux kernel: [ 0.003344] Initializing cgroup subsys freezer
Sep 27 12:58:26 tux kernel: [ 0.003401] Initializing cgroup subsys net_cls
Sep 27 12:58:26 tux kernel: [ 0.003454] Initializing cgroup subsys blkio
Sep 27 12:58:26 tux kernel: [ 0.003514] Initializing cgroup subsys perf_event
Sep 27 12:58:26 tux kernel: [ 0.003588] CPU: Physical Processor ID: 0
Sep 27 12:58:26 tux kernel: [ 0.003646] CPU: Processor Core ID: 0
Sep 27 12:58:26 tux kernel: [ 0.003963] mce: CPU supports 9 MCE banks
Sep 27 12:58:26 tux kernel: [ 0.004029] CPU0: Thermal monitoring enabled (TM1)
Sep 27 12:58:26 tux kernel: [ 0.004086] using mwait in idle threads.
Sep 27 12:58:26 tux kernel: [ 0.004455] ACPI: Core revision 20110623
Sep 27 12:58:26 tux kernel: [ 0.010906] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 27 12:58:26 tux kernel: [ 0.050626] CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09
Sep 27 12:58:26 tux kernel: [ 0.156189] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
Sep 27 12:58:26 tux kernel: [ 0.156373] ... version: 3
Sep 27 12:58:26 tux kernel: [ 0.156429] ... bit width: 48
Sep 27 12:58:26 tux kernel: [ 0.156483] ... generic registers: 8
Sep 27 12:58:26 tux kernel: [ 0.156539] ... value mask: 0000ffffffffffff
Sep 27 12:58:26 tux kernel: [ 0.156593] ... max period: 000000007fffffff
Sep 27 12:58:26 tux kernel: [ 0.156651] ... fixed-purpose events: 3
Sep 27 12:58:26 tux kernel: [ 0.156707] ... event mask: 00000007000000ff
Sep 27 12:58:26 tux kernel: [ 0.156841] NMI watchdog enabled, takes one hw-pmu counter.
Sep 27 12:58:26 tux kernel: [ 0.156966] Booting Node 0, Processors #1
Sep 27 12:58:26 tux kernel: [ 0.244145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Sep 27 12:58:26 tux kernel: [ 0.244147] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Sep 27 12:58:26 tux kernel: [ 0.264468] NMI watchdog enabled, takes one hw-pmu counter.
Sep 27 12:58:26 tux kernel: [ 0.264714] #2
Sep 27 12:58:26 tux kernel: [ 0.372475] NMI watchdog enabled, takes one hw-pmu counter.
Sep 27 12:58:26 tux kernel: [ 0.372600] #3 Ok.
Sep 27 12:58:26 tux kernel: [ 0.480417] NMI watchdog enabled, takes one hw-pmu counter.
Sep 27 12:58:26 tux kernel: [ 0.480498] Brought up 4 CPUs
Sep 27 12:58:26 tux kernel: [ 0.480552] Total of 4 processors activated (27200.04 BogoMIPS).
Sep 27 12:58:26 tux kernel: [ 0.483107] devtmpfs: initialized
Sep 27 12:58:26 tux kernel: [ 0.485207] PM: Registering ACPI NVS region at da389000 (598016 bytes)
Sep 27 12:58:26 tux kernel: [ 0.485284] PM: Registering ACPI NVS region at da6b0000 (274432 bytes)
Sep 27 12:58:26 tux kernel: [ 0.486622] print_constraints: dummy:
Sep 27 12:58:26 tux kernel: [ 0.486718] NET: Registered protocol family 16
Sep 27 12:58:26 tux kernel: [ 0.486837] ACPI: bus type pci registered
Sep 27 12:58:26 tux kernel: [ 0.486939] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Sep 27 12:58:26 tux kernel: [ 0.487009] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Sep 27 12:58:26 tux kernel: [ 0.493342] PCI: Using configuration type 1 for base access
Sep 27 12:58:26 tux kernel: [ 0.493904] bio: create slab <bio-0> at 0
Sep 27 12:58:26 tux kernel: [ 0.494019] ACPI: Added _OSI(Module Device)
Sep 27 12:58:26 tux kernel: [ 0.494075] ACPI: Added _OSI(Processor Device)
Sep 27 12:58:26 tux kernel: [ 0.494132] ACPI: Added _OSI(3.0 _SCP Extensions)
Sep 27 12:58:26 tux kernel: [ 0.494188] ACPI: Added _OSI(Processor Aggregator Device)
Sep 27 12:58:26 tux kernel: [ 0.496192] ACPI: Executed 1 blocks of module-level executable AML code
Sep 27 12:58:26 tux kernel: [ 0.508316] ACPI: SSDT 00000000da2ae018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.508703] ACPI: Dynamic OEM Table Load:
Sep 27 12:58:26 tux kernel: [ 0.508834] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.520183] ACPI: SSDT 00000000da2afa98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.520593] ACPI: Dynamic OEM Table Load:
Sep 27 12:58:26 tux kernel: [ 0.520725] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.532063] ACPI: SSDT 00000000da2b0c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.532439] ACPI: Dynamic OEM Table Load:
Sep 27 12:58:26 tux kernel: [ 0.532571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Sep 27 12:58:26 tux kernel: [ 0.544467] ACPI: Interpreter enabled
Sep 27 12:58:26 tux kernel: [ 0.544526] ACPI: (supports S0 S3 S4 S5)
Sep 27 12:58:26 tux kernel: [ 0.544749] ACPI: Using IOAPIC for interrupt routing
Sep 27 12:58:26 tux kernel: [ 0.549663] ACPI: Power Resource [FN00] (off)
Sep 27 12:58:26 tux kernel: [ 0.549780] ACPI: Power Resource [FN01] (off)
Sep 27 12:58:26 tux kernel: [ 0.549897] ACPI: Power Resource [FN02] (off)
Sep 27 12:58:26 tux kernel: [ 0.550011] ACPI: Power Resource [FN03] (off)
Sep 27 12:58:26 tux kernel: [ 0.550123] ACPI: Power Resource [FN04] (off)
Sep 27 12:58:26 tux kernel: [ 0.550471] ACPI: No dock devices found.
Sep 27 12:58:26 tux kernel: [ 0.550528] HEST: Table not found.
Sep 27 12:58:26 tux kernel: [ 0.550584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Sep 27 12:58:26 tux kernel: [ 0.550904] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Sep 27 12:58:26 tux kernel: [ 0.551338] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
Sep 27 12:58:26 tux kernel: [ 0.551398] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Sep 27 12:58:26 tux kernel: [ 0.551457] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Sep 27 12:58:26 tux kernel: [ 0.551523] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
Sep 27 12:58:26 tux kernel: [ 0.551592] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
Sep 27 12:58:26 tux kernel: [ 0.551662] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
Sep 27 12:58:26 tux kernel: [ 0.551732] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
Sep 27 12:58:26 tux kernel: [ 0.551798] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
Sep 27 12:58:26 tux kernel: [ 0.551866] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
Sep 27 12:58:26 tux kernel: [ 0.551932] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
Sep 27 12:58:26 tux kernel: [ 0.553298] pci0000:00: Requesting ACPI _OSC control (0x1d)
Sep 27 12:58:26 tux kernel: [ 0.553518] pci0000:00: ACPI _OSC control (0x18) granted
Sep 27 12:58:26 tux kernel: [ 0.556316] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.556827] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Sep 27 12:58:26 tux kernel: [ 0.557423] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.557936] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.558444] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.558955] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Sep 27 12:58:26 tux kernel: [ 0.559551] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.560065] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Sep 27 12:58:26 tux kernel: [ 0.560599] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
Sep 27 12:58:26 tux kernel: [ 0.560672] vgaarb: loaded
Sep 27 12:58:26 tux kernel: [ 0.560724] vgaarb: bridge control possible 0000:00:02.0
Sep 27 12:58:26 tux kernel: [ 0.560800] PCI: Using ACPI for IRQ routing
Sep 27 12:58:26 tux kernel: [ 0.562438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Sep 27 12:58:26 tux kernel: [ 0.562836] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Sep 27 12:58:26 tux kernel: [ 0.564904] Switching to clocksource hpet
Sep 27 12:58:26 tux kernel: [ 0.566148] pnp: PnP ACPI init
Sep 27 12:58:26 tux kernel: [ 0.566214] ACPI: bus type pnp registered
Sep 27 12:58:26 tux kernel: [ 0.566551] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.566781] system 00:05: [io 0x0680-0x069f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.566842] system 00:05: [io 0x1000-0x100f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.566899] system 00:05: [io 0xffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.566957] system 00:05: [io 0xffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567015] system 00:05: [io 0x0400-0x0453] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567074] system 00:05: [io 0x0458-0x047f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567129] system 00:05: [io 0x0500-0x057f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567188] system 00:05: [io 0x164e-0x164f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567312] system 00:07: [io 0x0454-0x0457] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567435] system 00:08: [io 0x0a00-0x0a0f] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.567885] system 00:0a: [io 0x04d0-0x04d1] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568234] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568300] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568361] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568419] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568479] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568535] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568591] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568647] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568705] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.568763] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
Sep 27 12:58:26 tux kernel: [ 0.568823] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.569040] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.569102] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
Sep 27 12:58:26 tux kernel: [ 0.569176] pnp: PnP ACPI: found 14 devices
Sep 27 12:58:26 tux kernel: [ 0.569232] ACPI: ACPI bus type pnp unregistered
Sep 27 12:58:26 tux kernel: [ 0.575543] NET: Registered protocol family 2
Sep 27 12:58:26 tux kernel: [ 0.575747] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 27 12:58:26 tux kernel: [ 0.576470] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Sep 27 12:58:26 tux kernel: [ 0.577486] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 27 12:58:26 tux kernel: [ 0.577656] TCP: Hash tables configured (established 524288 bind 65536)
Sep 27 12:58:26 tux kernel: [ 0.577719] TCP reno registered
Sep 27 12:58:26 tux kernel: [ 0.577782] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Sep 27 12:58:26 tux kernel: [ 0.577867] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Sep 27 12:58:26 tux kernel: [ 0.578014] NET: Registered protocol family 1
Sep 27 12:58:26 tux kernel: [ 0.578092] pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 27 12:58:26 tux kernel: [ 0.578190] pci 0000:00:14.0: PCI INT A disabled
Sep 27 12:58:26 tux kernel: [ 0.578253] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 27 12:58:26 tux kernel: [ 0.596950] pci 0000:00:1a.0: PCI INT A disabled
Sep 27 12:58:26 tux kernel: [ 0.597026] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Sep 27 12:58:26 tux kernel: [ 0.616935] pci 0000:00:1d.0: PCI INT A disabled
Sep 27 12:58:26 tux kernel: [ 0.617040] Unpacking initramfs...
Sep 27 12:58:26 tux kernel: [ 0.752905] Freeing initrd memory: 10168k freed
Sep 27 12:58:26 tux kernel: [ 0.753716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Sep 27 12:58:26 tux kernel: [ 0.753780] Placing 64MB software IO TLB between ffff8800d5e6d000 - ffff8800d9e6d000
Sep 27 12:58:26 tux kernel: [ 0.753848] software IO TLB at phys 0xd5e6d000 - 0xd9e6d000
Sep 27 12:58:26 tux kernel: [ 0.754274] audit: initializing netlink socket (disabled)
Sep 27 12:58:26 tux kernel: [ 0.754335] type=2000 audit(1348743491.600:1): initialized
Sep 27 12:58:26 tux kernel: [ 0.770972] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 27 12:58:26 tux kernel: [ 0.785318] VFS: Disk quotas dquot_6.5.2
Sep 27 12:58:26 tux kernel: [ 0.785401] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 27 12:58:26 tux kernel: [ 0.785517] msgmni has been set to 15808
Sep 27 12:58:26 tux kernel: [ 0.785685] alg: No test for stdrng (krng)
Sep 27 12:58:26 tux kernel: [ 0.785766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep 27 12:58:26 tux kernel: [ 0.785839] io scheduler noop registered
Sep 27 12:58:26 tux kernel: [ 0.785893] io scheduler deadline registered
Sep 27 12:58:26 tux kernel: [ 0.785964] io scheduler cfq registered (default)
Sep 27 12:58:26 tux kernel: [ 0.786078] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 27 12:58:26 tux kernel: [ 0.786148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep 27 12:58:26 tux kernel: [ 0.786211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Sep 27 12:58:26 tux kernel: [ 0.786526] ERST: Table is not found!
Sep 27 12:58:26 tux kernel: [ 0.786582] GHES: HEST is not enabled!
Sep 27 12:58:26 tux kernel: [ 0.786678] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep 27 12:58:26 tux kernel: [ 0.807127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 27 12:58:26 tux kernel: [ 0.949316] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 27 12:58:26 tux kernel: [ 0.996911] Linux agpgart interface v0.103
Sep 27 12:58:26 tux kernel: [ 0.997012] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
Sep 27 12:58:26 tux kernel: [ 0.997141] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Sep 27 12:58:26 tux kernel: [ 0.997853] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
Sep 27 12:58:26 tux kernel: [ 0.998010] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Sep 27 12:58:26 tux kernel: [ 0.998151] i8042: PNP: No PS/2 controller found. Probing ports directly.
Sep 27 12:58:26 tux kernel: [ 0.999238] mousedev: PS/2 mouse device common for all mice
Sep 27 12:58:26 tux kernel: [ 0.999327] rtc_cmos 00:06: RTC can wake from S4
Sep 27 12:58:26 tux kernel: [ 0.999484] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Sep 27 12:58:26 tux kernel: [ 0.999573] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Sep 27 12:58:26 tux kernel: [ 0.999637] cpuidle: using governor ladder
Sep 27 12:58:26 tux kernel: [ 0.999694] cpuidle: using governor menu
Sep 27 12:58:26 tux kernel: [ 0.999850] TCP cubic registered
Sep 27 12:58:26 tux kernel: [ 0.999952] NET: Registered protocol family 10
Sep 27 12:58:26 tux kernel: [ 1.000278] Mobile IPv6
Sep 27 12:58:26 tux kernel: [ 1.000334] NET: Registered protocol family 17
Sep 27 12:58:26 tux kernel: [ 1.000388] Registering the dns_resolver key type
Sep 27 12:58:26 tux kernel: [ 1.000530] registered taskstats version 1
Sep 27 12:58:26 tux kernel: [ 1.007780] rtc_cmos 00:06: setting system clock to 2012-09-27 10:58:12 UTC (1348743492)
Sep 27 12:58:26 tux kernel: [ 1.007900] Initializing network drop monitor service
Sep 27 12:58:26 tux kernel: [ 1.008603] Freeing unused kernel memory: 572k freed
Sep 27 12:58:26 tux kernel: [ 1.008717] Write protecting the kernel read-only data: 6144k
Sep 27 12:58:26 tux kernel: [ 1.010141] Freeing unused kernel memory: 668k freed
Sep 27 12:58:26 tux kernel: [ 1.011602] Freeing unused kernel memory: 684k freed
Sep 27 12:58:26 tux kernel: [ 1.025611] usbcore: registered new interface driver usbfs
Sep 27 12:58:26 tux kernel: [ 1.025689] usbcore: registered new interface driver hub
Sep 27 12:58:26 tux kernel: [ 1.030267] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
Sep 27 12:58:26 tux kernel: [ 1.030329] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
Sep 27 12:58:26 tux kernel: [ 1.030416] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 27 12:58:26 tux kernel: [ 1.032417] SCSI subsystem initialized
Sep 27 12:58:26 tux kernel: [ 1.033498] usbcore: registered new device driver usb
Sep 27 12:58:26 tux kernel: [ 1.033808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 27 12:58:26 tux kernel: [ 1.044964] ACPI: Fan [FAN0] (off)
Sep 27 12:58:26 tux kernel: [ 1.045127] ACPI: Fan [FAN1] (off)
Sep 27 12:58:26 tux kernel: [ 1.045203] ACPI: Fan [FAN2] (off)
Sep 27 12:58:26 tux kernel: [ 1.045285] ACPI: Fan [FAN3] (off)
Sep 27 12:58:26 tux kernel: [ 1.045362] ACPI: Fan [FAN4] (off)
Sep 27 12:58:26 tux kernel: [ 1.072854] thermal LNXTHERM:00: registered as thermal_zone0
Sep 27 12:58:26 tux kernel: [ 1.072918] ACPI: Thermal Zone [TZ00] (28 C)
Sep 27 12:58:26 tux kernel: [ 1.073074] thermal LNXTHERM:01: registered as thermal_zone1
Sep 27 12:58:26 tux kernel: [ 1.073141] ACPI: Thermal Zone [TZ01] (30 C)
Sep 27 12:58:26 tux kernel: [ 1.340651] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:83:64:41
Sep 27 12:58:26 tux kernel: [ 1.340724] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Sep 27 12:58:26 tux kernel: [ 1.340820] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Sep 27 12:58:26 tux kernel: [ 1.340902] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 27 12:58:26 tux kernel: [ 1.340995] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.341065] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Sep 27 12:58:26 tux kernel: [ 1.341166] ehci_hcd 0000:00:1a.0: debug port 2
Sep 27 12:58:26 tux kernel: [ 1.345106] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c38000
Sep 27 12:58:26 tux kernel: [ 1.360499] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Sep 27 12:58:26 tux kernel: [ 1.360580] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sep 27 12:58:26 tux kernel: [ 1.360641] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 27 12:58:26 tux kernel: [ 1.360710] usb usb1: Product: EHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.360767] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
Sep 27 12:58:26 tux kernel: [ 1.360826] usb usb1: SerialNumber: 0000:00:1a.0
Sep 27 12:58:26 tux kernel: [ 1.360950] hub 1-0:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 1.361009] hub 1-0:1.0: 2 ports detected
Sep 27 12:58:26 tux kernel: [ 1.361104] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Sep 27 12:58:26 tux kernel: [ 1.361179] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.361240] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep 27 12:58:26 tux kernel: [ 1.361332] ehci_hcd 0000:00:1d.0: debug port 2
Sep 27 12:58:26 tux kernel: [ 1.365295] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c37000
Sep 27 12:58:26 tux kernel: [ 1.380496] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Sep 27 12:58:26 tux kernel: [ 1.380572] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Sep 27 12:58:26 tux kernel: [ 1.380633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 27 12:58:26 tux kernel: [ 1.380703] usb usb2: Product: EHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.380759] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
Sep 27 12:58:26 tux kernel: [ 1.380815] usb usb2: SerialNumber: 0000:00:1d.0
Sep 27 12:58:26 tux kernel: [ 1.380932] hub 2-0:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 1.380988] hub 2-0:1.0: 2 ports detected
Sep 27 12:58:26 tux kernel: [ 1.381097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sep 27 12:58:26 tux kernel: [ 1.381218] ahci: SSS flag set, parallel bus scan disabled
Sep 27 12:58:26 tux kernel: [ 1.396524] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode
Sep 27 12:58:26 tux kernel: [ 1.396597] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
Sep 27 12:58:26 tux kernel: [ 1.420767] scsi0 : ahci
Sep 27 12:58:26 tux kernel: [ 1.420897] scsi1 : ahci
Sep 27 12:58:26 tux kernel: [ 1.420988] scsi2 : ahci
Sep 27 12:58:26 tux kernel: [ 1.421077] scsi3 : ahci
Sep 27 12:58:26 tux kernel: [ 1.421167] scsi4 : ahci
Sep 27 12:58:26 tux kernel: [ 1.421258] scsi5 : ahci
Sep 27 12:58:26 tux kernel: [ 1.421482] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 41
Sep 27 12:58:26 tux kernel: [ 1.421553] ata2: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36180 irq 41
Sep 27 12:58:26 tux kernel: [ 1.421623] ata3: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36200 irq 41
Sep 27 12:58:26 tux kernel: [ 1.421692] ata4: DUMMY
Sep 27 12:58:26 tux kernel: [ 1.421744] ata5: DUMMY
Sep 27 12:58:26 tux kernel: [ 1.421798] ata6: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36380 irq 41
Sep 27 12:58:26 tux kernel: [ 1.421884] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 27 12:58:26 tux kernel: [ 1.421993] xhci_hcd 0000:00:14.0: xHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.422053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Sep 27 12:58:26 tux kernel: [ 1.422208] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7c20000
Sep 27 12:58:26 tux kernel: [ 1.422394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Sep 27 12:58:26 tux kernel: [ 1.422455] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 27 12:58:26 tux kernel: [ 1.422525] usb usb3: Product: xHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.422582] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
Sep 27 12:58:26 tux kernel: [ 1.422638] usb usb3: SerialNumber: 0000:00:14.0
Sep 27 12:58:26 tux kernel: [ 1.422762] hub 3-0:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 1.422824] hub 3-0:1.0: 4 ports detected
Sep 27 12:58:26 tux kernel: [ 1.422917] xhci_hcd 0000:00:14.0: xHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.422976] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Sep 27 12:58:26 tux kernel: [ 1.423056] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Sep 27 12:58:26 tux kernel: [ 1.423118] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 27 12:58:26 tux kernel: [ 1.423186] usb usb4: Product: xHCI Host Controller
Sep 27 12:58:26 tux kernel: [ 1.423244] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
Sep 27 12:58:26 tux kernel: [ 1.423303] usb usb4: SerialNumber: 0000:00:14.0
Sep 27 12:58:26 tux kernel: [ 1.423416] hub 4-0:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 1.423478] hub 4-0:1.0: 4 ports detected
Sep 27 12:58:26 tux kernel: [ 1.672315] usb 1-1: new high-speed USB device number 2 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 1.740285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep 27 12:58:26 tux kernel: [ 1.741693] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 1.741780] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 1.752008] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
Sep 27 12:58:26 tux kernel: [ 1.752086] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Sep 27 12:58:26 tux kernel: [ 1.752268] Refined TSC clocksource calibration: 3400.033 MHz.
Sep 27 12:58:26 tux kernel: [ 1.752343] Switching to clocksource tsc
Sep 27 12:58:26 tux kernel: [ 1.761575] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 1.761662] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 1.771997] ata1.00: configured for UDMA/133
Sep 27 12:58:26 tux kernel: [ 1.772138] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
Sep 27 12:58:26 tux kernel: [ 1.804575] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
Sep 27 12:58:26 tux kernel: [ 1.804645] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 1.804842] hub 1-1:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 1.804944] hub 1-1:1.0: 6 ports detected
Sep 27 12:58:26 tux kernel: [ 1.916172] usb 2-1: new high-speed USB device number 2 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 2.048432] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
Sep 27 12:58:26 tux kernel: [ 2.048502] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 2.048697] hub 2-1:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 2.048804] hub 2-1:1.0: 8 ports detected
Sep 27 12:58:26 tux kernel: [ 2.092074] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep 27 12:58:26 tux kernel: [ 2.093283] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 2.093363] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 2.094487] ata2.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OAA10, max UDMA/133
Sep 27 12:58:26 tux kernel: [ 2.094561] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Sep 27 12:58:26 tux kernel: [ 2.095794] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 2.095875] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 2.096998] ata2.00: configured for UDMA/133
Sep 27 12:58:26 tux kernel: [ 2.097103] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
Sep 27 12:58:26 tux kernel: [ 2.120144] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 2.247566] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=1004
Sep 27 12:58:26 tux kernel: [ 2.247636] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 27 12:58:26 tux kernel: [ 2.247697] usb 1-1.1: Product: DeskJet 970C
Sep 27 12:58:26 tux kernel: [ 2.247749] usb 1-1.1: Manufacturer: Hewlett-Packard
Sep 27 12:58:26 tux kernel: [ 2.247799] usb 1-1.1: SerialNumber: MY07K1D0G5JQ
Sep 27 12:58:26 tux kernel: [ 2.320026] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 2.413595] usb 1-1.3: New USB device found, idVendor=eb1a, idProduct=51b2
Sep 27 12:58:26 tux kernel: [ 2.413666] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
Sep 27 12:58:26 tux kernel: [ 2.413728] usb 1-1.3: Product: MediaTV Pro
Sep 27 12:58:26 tux kernel: [ 2.413778] usb 1-1.3: Manufacturer: Sundtek
Sep 27 12:58:26 tux kernel: [ 2.413828] usb 1-1.3: SerialNumber: U120820070038
Sep 27 12:58:26 tux kernel: [ 2.415896] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 27 12:58:26 tux kernel: [ 2.418511] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 2.418593] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 2.420704] ata3.00: ATAPI: TEAC DV-W5000S, 1.0P, max UDMA/100
Sep 27 12:58:26 tux kernel: [ 2.423687] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep 27 12:58:26 tux kernel: [ 2.423767] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep 27 12:58:26 tux kernel: [ 2.425833] ata3.00: configured for UDMA/100
Sep 27 12:58:26 tux kernel: [ 2.483930] usb 1-1.5: new low-speed USB device number 5 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 2.488562] scsi 2:0:0:0: CD-ROM TEAC DV-W5000S 1.0P PQ: 0 ANSI: 5
Sep 27 12:58:26 tux kernel: [ 2.673566] usb 1-1.5: New USB device found, idVendor=051d, idProduct=0002
Sep 27 12:58:26 tux kernel: [ 2.673637] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Sep 27 12:58:26 tux kernel: [ 2.673700] usb 1-1.5: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
Sep 27 12:58:26 tux kernel: [ 2.673753] usb 1-1.5: Manufacturer: American Power Conversion
Sep 27 12:58:26 tux kernel: [ 2.673804] usb 1-1.5: SerialNumber: 4B0745P24329
Sep 27 12:58:26 tux kernel: [ 2.751773] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 2.807662] ata6: SATA link down (SStatus 0 SControl 300)
Sep 27 12:58:26 tux kernel: [ 2.809677] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Sep 27 12:58:26 tux kernel: [ 2.809768] sd 0:0:0:0: [sda] Write Protect is off
Sep 27 12:58:26 tux kernel: [ 2.809821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 27 12:58:26 tux kernel: [ 2.811214] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Sep 27 12:58:26 tux kernel: [ 2.811316] sd 1:0:0:0: [sdb] Write Protect is off
Sep 27 12:58:26 tux kernel: [ 2.811377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 27 12:58:26 tux kernel: [ 2.812341] sda: sda1 sda2 sda3 sda4 < sda5 >
Sep 27 12:58:26 tux kernel: [ 2.812586] sd 0:0:0:0: [sda] Attached SCSI disk
Sep 27 12:58:26 tux kernel: [ 2.816172] sdb: sdb1
Sep 27 12:58:26 tux kernel: [ 2.816335] sd 1:0:0:0: [sdb] Attached SCSI disk
Sep 27 12:58:26 tux kernel: [ 2.817197] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep 27 12:58:26 tux kernel: [ 2.817263] sd 1:0:0:0: Attached scsi generic sg1 type 0
Sep 27 12:58:26 tux kernel: [ 2.817326] sr 2:0:0:0: Attached scsi generic sg2 type 5
Sep 27 12:58:26 tux kernel: [ 2.842128] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Sep 27 12:58:26 tux kernel: [ 2.842175] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 27 12:58:26 tux kernel: [ 2.843975] usb 1-1.6: New USB device found, idVendor=04b4, idProduct=6560
Sep 27 12:58:26 tux kernel: [ 2.844035] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 2.844241] hub 1-1.6:1.0: USB hub found
Sep 27 12:58:26 tux kernel: [ 2.844337] hub 1-1.6:1.0: 4 ports detected
Sep 27 12:58:26 tux kernel: [ 2.915676] usb 2-1.5: new low-speed USB device number 3 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 3.016994] usb 2-1.5: New USB device found, idVendor=046a, idProduct=0011
Sep 27 12:58:26 tux kernel: [ 3.017060] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 3.087577] usb 2-1.6: new low-speed USB device number 4 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 3.185265] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c03d
Sep 27 12:58:26 tux kernel: [ 3.185331] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 3.185387] usb 2-1.6: Product: USB-PS/2 Optical Mouse
Sep 27 12:58:26 tux kernel: [ 3.185432] usb 2-1.6: Manufacturer: Logitech
Sep 27 12:58:26 tux kernel: [ 3.255476] usb 2-1.8: new low-speed USB device number 5 using ehci_hcd
Sep 27 12:58:26 tux kernel: [ 3.352541] usb 2-1.8: New USB device found, idVendor=046d, idProduct=c404
Sep 27 12:58:26 tux kernel: [ 3.352607] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 27 12:58:26 tux kernel: [ 3.352663] usb 2-1.8: Product: Trackball
Sep 27 12:58:26 tux kernel: [ 3.352705] usb 2-1.8: Manufacturer: Logitech
Sep 27 12:58:26 tux kernel: [ 4.322680] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.0-1.5/input0
Sep 27 12:58:26 tux kernel: [ 4.331706] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input0
Sep 27 12:58:26 tux kernel: [ 4.331798] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1.5/input0
Sep 27 12:58:26 tux kernel: [ 4.334933] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input1
Sep 27 12:58:26 tux kernel: [ 4.335039] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
Sep 27 12:58:26 tux kernel: [ 4.339330] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
Sep 27 12:58:26 tux kernel: [ 4.339432] generic-usb 0003:046D:C404.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-1.8/input0
Sep 27 12:58:26 tux kernel: [ 4.339505] usbcore: registered new interface driver usbhid
Sep 27 12:58:26 tux kernel: [ 4.339554] usbhid: USB HID core driver
Sep 27 12:58:26 tux kernel: [ 4.867715] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Sep 27 12:58:26 tux kernel: [ 5.141767] ACPI: Requesting acpi_cpufreq
Sep 27 12:58:26 tux kernel: [ 5.141900] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Sep 27 12:58:26 tux kernel: [ 5.141979] ACPI: Power Button [PWRB]
Sep 27 12:58:26 tux kernel: [ 5.157302] wmi: Mapper loaded
Sep 27 12:58:26 tux kernel: [ 5.157363] iTCO_vendor_support: vendor-support=0
Sep 27 12:58:26 tux kernel: [ 5.158603] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
Sep 27 12:58:26 tux kernel: [ 5.158704] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
Sep 27 12:58:26 tux kernel: [ 5.158813] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 27 12:58:26 tux kernel: [ 5.159233] [drm] Initialized drm 1.1.0 20060810
Sep 27 12:58:26 tux kernel: [ 5.160536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Sep 27 12:58:26 tux kernel: [ 5.160597] ACPI: Power Button [PWRF]
Sep 27 12:58:26 tux kernel: [ 5.174833] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Sep 27 12:58:26 tux kernel: [ 5.177443] input: PC Speaker as /devices/platform/pcspkr/input/input5
Sep 27 12:58:26 tux kernel: [ 5.184870] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Sep 27 12:58:26 tux kernel: [ 5.224092] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Sep 27 12:58:26 tux kernel: [ 5.228997] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Sep 27 12:58:26 tux kernel: [ 5.229162] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep 27 12:58:26 tux kernel: [ 5.229221] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
Sep 27 12:58:26 tux kernel: [ 5.229281] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 27 12:58:26 tux kernel: [ 5.229365] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 27 12:58:26 tux kernel: [ 5.261170] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Sep 27 12:58:26 tux kernel: [ 5.261230] [drm] Driver supports precise vblank timestamp query.
Sep 27 12:58:26 tux kernel: [ 5.261614] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
Sep 27 12:58:26 tux kernel: [ 5.737520] fbcon: inteldrmfb (fb0) is primary device
Sep 27 12:58:26 tux kernel: [ 5.925663] Console: switching to colour frame buffer device 240x67
Sep 27 12:58:26 tux kernel: [ 5.936343] fb0: inteldrmfb frame buffer device
Sep 27 12:58:26 tux kernel: [ 5.936345] drm: registered panic notifier
Sep 27 12:58:26 tux kernel: [ 5.966420] acpi device:4a: registered as cooling_device9
Sep 27 12:58:26 tux kernel: [ 5.966723] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
Sep 27 12:58:26 tux kernel: [ 5.966889] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Sep 27 12:58:26 tux kernel: [ 5.967002] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep 27 12:58:26 tux kernel: [ 6.380650] EXT4-fs (sda2): re-mounted. Opts: (null)
Sep 27 12:58:26 tux kernel: [ 6.419433] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Sep 27 12:58:26 tux kernel: [ 6.447190] loop: module loaded
Sep 27 12:58:26 tux kernel: [ 6.458129] w83627ehf: Found NCT6775F chip at 0xa00
Sep 27 12:58:26 tux kernel: [ 6.464459] fuse init (API version 7.17)
Sep 27 12:58:26 tux kernel: [ 7.003391] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
Sep 27 12:58:26 tux kernel: [ 7.373948] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 27 12:58:26 tux kernel: [ 8.943180] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Sep 27 12:58:26 tux kernel: [ 8.943251] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Sep 27 12:58:26 tux kernel: [ 8.944065] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sep 27 12:58:26 tux kernel: [ 14.447601] RPC: Registered named UNIX socket transport module.
Sep 27 12:58:26 tux kernel: [ 14.447659] RPC: Registered udp transport module.
Sep 27 12:58:26 tux kernel: [ 14.447701] RPC: Registered tcp transport module.
Sep 27 12:58:26 tux kernel: [ 14.450621] RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 27 12:58:26 tux kernel: [ 14.458601] FS-Cache: Loaded
Sep 27 12:58:26 tux kernel: [ 14.468914] FS-Cache: Netfs 'nfs' registered for caching
Sep 27 12:58:26 tux kernel: [ 14.476785] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 27 12:58:26 tux kernel: [ 14.877112] thinkpad_ec: no ThinkPad embedded controller!
Sep 27 12:58:26 tux kernel: [ 14.884295] vboxdrv: fAsync=0 offMin=0x173 offMax=0xb7e
Sep 27 12:58:26 tux kernel: [ 14.885620] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Sep 27 12:58:26 tux kernel: [ 14.904329] vboxpci: IOMMU not found (not registered)
Sep 27 12:58:26 tux kernel: [ 14.999134] lp: driver loaded but no devices found
Sep 27 12:58:26 tux kernel: [ 15.003883] ppdev: user-space parallel port driver
Sep 27 12:58:31 tux kernel: [ 19.655702] input: Sundtek Ltd. Remote Control as /devices/virtual/input/input9
Sep 27 16:01:24 tux kernel: [10986.591612] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
Sep 27 16:01:29 tux kernel: [10991.674143] device eth0 entered promiscuous mode

================================================== ============
shortly before 17:46 the crash happened, power up to 87 watts.
Then I rebooted after pressing hard reset for ~ 10-20 sec.
================================================== ============

Sep 27 17:46:58 tux kernel: imklog 5.8.11, log source = /proc/kmsg started.
Sep 27 17:46:58 tux rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2394" x-info="http://www.rsyslog.com"] start
Sep 27 17:46:58 tux kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 27 17:46:58 tux kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 27 17:46:58 tux kernel: [ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
Sep 27 17:46:58 tux kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda2 ro enable_mtrr_cleanup
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000040005000 - 00000000d9e6d000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000d9e6d000 - 00000000da299000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da299000 - 00000000da2a5000 (ACPI data)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da2a5000 - 00000000da301000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da301000 - 00000000da306000 (ACPI data)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da306000 - 00000000da389000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da389000 - 00000000da41b000 (ACPI NVS)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da41b000 - 00000000da6af000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da6af000 - 00000000da6b0000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da6b0000 - 00000000da6f3000 (ACPI NVS)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000da6f3000 - 00000000db000000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Sep 27 17:46:58 tux kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000021f600000 (usable)
Sep 27 17:46:58 tux kernel: [ 0.000000] NX (Execute Disable) protection: active
Sep 27 17:46:58 tux kernel: [ 0.000000] DMI 2.7 present.
.........

10-05-2012, 04:50 PM

Javier Cantero wrote:

> If it helps, I am using now linux-image-3.5-trunk-amd64
> (3.5.2-1~experimental.1) kernel with no freezes since the change.

That's good to hear. Per, Ingo, does that work around trouble on
your machines, too?

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20121005165056.GB15867@elie.Belkin

10-05-2012, 09:40 PM

On 2012-10-05 02:25, Jonathan Nieder wrote:

Per Foreby wrote:

I just had a freeze, the first one sinc sunday. Actually while browsing your
comment

Jonathan: netconsole didn't log anything interesting.

Thanks. Even the absence of output can be interesting; do you have the log
from that boot and freeze?

I have attached the dmesg from the last boot before the freeze, and the
debug log from the last hour before the freeze.

/Per
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=/dev/md0 ro netconsole=@/,514@192.168.201.1/ drm.debug=0xe
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d8fc6000 (usable)
[ 0.000000] BIOS-e820: 00000000d8fc6000 - 00000000d8fc9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d8fc9000 - 00000000d8fcd000 (usable)
[ 0.000000] BIOS-e820: 00000000d8fcd000 - 00000000d95d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000d95d4000 - 00000000d9828000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9828000 - 00000000d9835000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d9835000 - 00000000d9854000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9854000 - 00000000d9859000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d9859000 - 00000000d989c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d989c000 - 00000000d9cac000 (usable)
[ 0.000000] BIOS-e820: 00000000d9cac000 - 00000000d9ff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff4000 - 00000000da000000 (usable)
[ 0.000000] BIOS-e820: 00000000db000000 - 00000000df200000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000081fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LE, BIOS 0316 02/14/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x81fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 800000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 81FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd60] fcd60
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000da000000
[ 0.000000] 0000000000 - 00da000000 page 2M
[ 0.000000] kernel direct mapping tables up to da000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000081fe00000
[ 0.000000] 0100000000 - 081fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 81fe00000 @ d9c8a000-d9cac000
[ 0.000000] RAMDISK: 36a14000 - 37502000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000d9828070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d98327f0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000d9828168 0A683 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d9852f80 00040
[ 0.000000] ACPI: APIC 00000000d98328e8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000d9832980 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d98329c0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d98329f8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d9832d68 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d9833718 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000d98341b0 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000081fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000081fe00000
[ 0.000000] NODE_DATA [000000081fdfb000 - 000000081fdfffff]
[ 0.000000] [ffffea0000000000-ffffea001c7fffff] PMD -> [ffff8807ff400000-ffff88081b5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0081fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d8fc6
[ 0.000000] 0: 0x000d8fc9 -> 0x000d8fcd
[ 0.000000] 0: 0x000d989c -> 0x000d9cac
[ 0.000000] 0: 0x000d9ff4 -> 0x000da000
[ 0.000000] 0: 0x00100000 -> 0x0081fe00
[ 0.000000] On node 0 totalpages: 8359794
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 870941 pages, LIFO batch:31
[ 0.000000] Normal zone: 102137 pages used for memmap
[ 0.000000] Normal zone: 7368455 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d8fc6000 - 00000000d8fc9000
[ 0.000000] PM: Registered nosave memory: 00000000d8fcd000 - 00000000d95d4000
[ 0.000000] PM: Registered nosave memory: 00000000d95d4000 - 00000000d9828000
[ 0.000000] PM: Registered nosave memory: 00000000d9828000 - 00000000d9835000
[ 0.000000] PM: Registered nosave memory: 00000000d9835000 - 00000000d9854000
[ 0.000000] PM: Registered nosave memory: 00000000d9854000 - 00000000d9859000
[ 0.000000] PM: Registered nosave memory: 00000000d9859000 - 00000000d989c000
[ 0.000000] PM: Registered nosave memory: 00000000d9cac000 - 00000000d9ff4000
[ 0.000000] PM: Registered nosave memory: 00000000da000000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000df200000
[ 0.000000] PM: Registered nosave memory: 00000000df200000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at df200000 (gap: df200000:18e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88081fa00000 s82816 r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8243316
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=/dev/md0 ro netconsole=@/,514@192.168.201.1/ drm.debug=0xe
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32891584k/34076672k available (3409k kernel code, 637496k absent, 547592k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3410.143 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.28 BogoMIPS (lpj=13640572)
[ 0.000113] pid_max: default: 32768 minimum: 301
[ 0.000189] Security Framework initialized
[ 0.000241] AppArmor: AppArmor disabled by boot time parameter
[ 0.002093] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.008177] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010789] Mount-cache hash table entries: 256
[ 0.010920] Initializing cgroup subsys cpuacct
[ 0.010973] Initializing cgroup subsys memory
[ 0.011029] Initializing cgroup subsys devices
[ 0.011081] Initializing cgroup subsys freezer
[ 0.011131] Initializing cgroup subsys net_cls
[ 0.011183] Initializing cgroup subsys blkio
[ 0.011237] Initializing cgroup subsys perf_event
[ 0.011308] CPU: Physical Processor ID: 0
[ 0.011358] CPU: Processor Core ID: 0
[ 0.011411] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011411] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011775] mce: CPU supports 9 MCE banks
[ 0.011834] CPU0: Thermal monitoring enabled (TM1)
[ 0.011889] using mwait in idle threads.
[ 0.012258] ACPI: Core revision 20110623
[ 0.080962] DMAR: Host address width 36
[ 0.081013] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.081069] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.081133] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.081188] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f010da
[ 0.081252] DMAR: RMRR base: 0x000000d954b000 end: 0x000000d9567fff
[ 0.081306] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.081428] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.081480] HPET id 0 under DRHD base 0xfed91000
[ 0.081650] Enabled IRQ remapping in x2apic mode
[ 0.081701] Enabling x2apic
[ 0.081749] Enabled x2apic
[ 0.081802] Switched APIC routing to cluster x2apic.
[ 0.082263] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121960] CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
[ 0.227850] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.228024] ... version: 3
[ 0.229281] ... bit width: 48
[ 0.229331] ... generic registers: 4
[ 0.229381] ... value mask: 0000ffffffffffff
[ 0.229434] ... max period: 000000007fffffff
[ 0.229485] ... fixed-purpose events: 3
[ 0.229535] ... event mask: 000000070000000f
[ 0.229697] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.229818] Booting Node 0, Processors #1
[ 0.229896] smpboot cpu 1: start_ip = 98000
[ 0.340144] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.340268] #2
[ 0.340306] smpboot cpu 2: start_ip = 98000
[ 0.447970] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.448096] #3
[ 0.448135] smpboot cpu 3: start_ip = 98000
[ 0.555897] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.556019] #4
[ 0.556057] smpboot cpu 4: start_ip = 98000
[ 0.663768] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.663898] #5
[ 0.663937] smpboot cpu 5: start_ip = 98000
[ 0.771701] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.771826] #6
[ 0.771864] smpboot cpu 6: start_ip = 98000
[ 0.879530] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.879654] #7 Ok.
[ 0.879702] smpboot cpu 7: start_ip = 98000
[ 0.987518] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.987592] Brought up 8 CPUs
[ 0.987641] Total of 8 processors activated (54559.57 BogoMIPS).
[ 0.994170] devtmpfs: initialized
[ 0.997301] PM: Registering ACPI NVS region at d95d4000 (2441216 bytes)
[ 0.997414] PM: Registering ACPI NVS region at d9835000 (126976 bytes)
[ 0.997470] PM: Registering ACPI NVS region at d9859000 (274432 bytes)
[ 0.997626] print_constraints: dummy:
[ 0.997718] NET: Registered protocol family 16
[ 0.997829] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.997893] ACPI: bus type pci registered
[ 0.997987] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.998054] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 1.004436] PCI: Using configuration type 1 for base access
[ 1.005360] bio: create slab <bio-0> at 0
[ 1.005476] ACPI: Added _OSI(Module Device)
[ 1.005527] ACPI: Added _OSI(Processor Device)
[ 1.005578] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.005629] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.006555] ACPI: EC: Look up EC in DSDT
[ 1.007384] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.019414] ACPI: SSDT 00000000d9581018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.019776] ACPI: Dynamic OEM Table Load:
[ 1.019898] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.031277] ACPI: SSDT 00000000d9582a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.031665] ACPI: Dynamic OEM Table Load:
[ 1.031786] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.043155] ACPI: SSDT 00000000d9583c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.043509] ACPI: Dynamic OEM Table Load:
[ 1.043631] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.056070] ACPI: Interpreter enabled
[ 1.056123] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.056369] ACPI: Using IOAPIC for interrupt routing
[ 1.060633] ACPI: Power Resource [FN00] (off)
[ 1.060742] ACPI: Power Resource [FN01] (off)
[ 1.060848] ACPI: Power Resource [FN02] (off)
[ 1.060954] ACPI: Power Resource [FN03] (off)
[ 1.061060] ACPI: Power Resource [FN04] (off)
[ 1.061310] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 1.061481] ACPI: No dock devices found.
[ 1.061532] HEST: Table not found.
[ 1.061582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.061877] \_SB_.PCI0:_OSC invalid UUID
[ 1.061878] _OSC request data:1 8 1f
[ 1.061881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.062303] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.062357] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.062412] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.062475] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.062539] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.062602] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.062666] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.062729] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.062793] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.062856] pci_root PNP0A08:00: host bridge window [mem 0xdf200000-0xfeafffff]
[ 1.062927] pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
[ 1.062953] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
[ 1.062975] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.062977] pci 0000:00:01.0: PME# disabled
[ 1.062991] pci 0000:00:02.0: [8086:0162] type 0 class 0x000300
[ 1.062998] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.063002] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.063005] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.063048] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[ 1.063067] pci 0000:00:14.0: reg 10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 1.063132] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.063135] pci 0000:00:14.0: PME# disabled
[ 1.063153] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[ 1.063173] pci 0000:00:16.0: reg 10: [mem 0xf7e16000-0xf7e1600f 64bit]
[ 1.063242] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.063245] pci 0000:00:16.0: PME# disabled
[ 1.063272] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[ 1.063291] pci 0000:00:1a.0: reg 10: [mem 0xf7e14000-0xf7e143ff]
[ 1.063374] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.063378] pci 0000:00:1a.0: PME# disabled
[ 1.063402] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[ 1.063529] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.063532] pci 0000:00:1c.0: PME# disabled
[ 1.063563] pci 0000:00:1c.4: [8086:1e18] type 1 class 0x000604
[ 1.063634] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.063637] pci 0000:00:1c.4: PME# disabled
[ 1.063657] pci 0000:00:1c.5: [8086:244e] type 1 class 0x000604
[ 1.063729] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.063732] pci 0000:00:1c.5: PME# disabled
[ 1.063752] pci 0000:00:1c.6: [8086:1e1c] type 1 class 0x000604
[ 1.063823] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.063826] pci 0000:00:1c.6: PME# disabled
[ 1.063846] pci 0000:00:1c.7: [8086:1e1e] type 1 class 0x000604
[ 1.063918] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.063921] pci 0000:00:1c.7: PME# disabled
[ 1.063945] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[ 1.063963] pci 0000:00:1d.0: reg 10: [mem 0xf7e13000-0xf7e133ff]
[ 1.064046] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.064050] pci 0000:00:1d.0: PME# disabled
[ 1.064070] pci 0000:00:1f.0: [8086:1e44] type 0 class 0x000601
[ 1.064184] pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
[ 1.064200] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.064206] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.064213] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.064219] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.064226] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.064232] pci 0000:00:1f.2: reg 24: [mem 0xf7e12000-0xf7e127ff]
[ 1.064271] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.064274] pci 0000:00:1f.2: PME# disabled
[ 1.064288] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[ 1.064301] pci 0000:00:1f.3: reg 10: [mem 0xf7e11000-0xf7e110ff 64bit]
[ 1.064319] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.064356] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.064479] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.064604] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 1.064622] pci 0000:03:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.064655] pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 1.064675] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 1.064763] pci 0000:03:00.0: supports D1 D2
[ 1.064764] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.064768] pci 0000:03:00.0: PME# disabled
[ 1.071028] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 1.071099] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 1.071106] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.071160] pci 0000:04:00.0: [1b21:1080] type 1 class 0x000604
[ 1.071275] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 1.071332] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 1.071339] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.071340] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.071341] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.071343] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.071344] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.071346] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.071348] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.071350] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.071351] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.071352] pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[ 1.071407] pci 0000:05:00.0: [1274:5880] type 0 class 0x000401
[ 1.071437] pci 0000:05:00.0: reg 10: [io 0xd000-0xd03f]
[ 1.071577] pci 0000:05:00.0: supports D2
[ 1.071655] pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 1.071717] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
[ 1.071730] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 1.071732] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.071733] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.071734] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.071736] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.071737] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.071738] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.071740] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.071741] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.071742] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.071744] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.071745] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.071746] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.071748] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[ 1.071816] pci 0000:06:00.0: [1b4b:9120] type 0 class 0x000106
[ 1.071832] pci 0000:06:00.0: reg 10: [io 0xc090-0xc097]
[ 1.071844] pci 0000:06:00.0: reg 14: [io 0xc080-0xc083]
[ 1.071855] pci 0000:06:00.0: reg 18: [io 0xc070-0xc077]
[ 1.071867] pci 0000:06:00.0: reg 1c: [io 0xc060-0xc063]
[ 1.071878] pci 0000:06:00.0: reg 20: [io 0xc050-0xc05f]
[ 1.071889] pci 0000:06:00.0: reg 24: [mem 0xf7d15000-0xf7d157ff]
[ 1.071901] pci 0000:06:00.0: reg 30: [mem 0xf7d00000-0xf7d0ffff pref]
[ 1.071957] pci 0000:06:00.0: PME# supported from D3hot
[ 1.071961] pci 0000:06:00.0: PME# disabled
[ 1.079015] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[ 1.079087] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 1.079090] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.079159] pci 0000:07:00.0: [1b21:1042] type 0 class 0x000c03
[ 1.079186] pci 0000:07:00.0: reg 10: [mem 0xf7c00000-0xf7c07fff 64bit]
[ 1.079327] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 1.079331] pci 0000:07:00.0: PME# disabled
[ 1.087008] pci 0000:00:1c.7: PCI bridge to [bus 07-07]
[ 1.087081] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.087111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.087220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.087251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.087278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.087307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.P9PE._PRT]
[ 1.087355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.087388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 1.087415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.087492] \_SB_.PCI0:_OSC invalid UUID
[ 1.087493] _OSC request data:1 1f 1f
[ 1.087495] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.087582] \_SB_.PCI0:_OSC invalid UUID
[ 1.087582] _OSC request data:1 0 1d
[ 1.087585] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.087649] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.090807] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.091291] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.091770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.092248] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.092727] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.093286] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.093762] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.094321] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.094827] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 1.094896] vgaarb: loaded
[ 1.094945] vgaarb: bridge control possible 0000:00:02.0
[ 1.095020] PCI: Using ACPI for IRQ routing
[ 1.096397] PCI: pci_cache_line_size set to 64 bytes
[ 1.096460] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.096461] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.096463] reserve RAM buffer: 00000000d8fc6000 - 00000000dbffffff
[ 1.096466] reserve RAM buffer: 00000000d8fcd000 - 00000000dbffffff
[ 1.096468] reserve RAM buffer: 00000000d9cac000 - 00000000dbffffff
[ 1.096470] reserve RAM buffer: 00000000da000000 - 00000000dbffffff
[ 1.096471] reserve RAM buffer: 000000081fe00000 - 000000081fffffff
[ 1.096544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.096920] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.098984] Switching to clocksource hpet
[ 1.100271] pnp: PnP ACPI init
[ 1.100328] ACPI: bus type pnp registered
[ 1.100568] pnp 00:00: [bus 00-3e]
[ 1.100570] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.100571] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.100572] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.100573] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.100575] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.100576] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.100577] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.100578] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.100579] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.100580] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.100581] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.100582] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.100584] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.100585] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.100586] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.100588] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.100589] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.100590] pnp 00:00: [mem 0xdf200000-0xfeafffff window]
[ 1.100591] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.100623] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.100637] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.100661] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.100716] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.100724] pnp 00:02: [io 0x0000-0x001f]
[ 1.100725] pnp 00:02: [io 0x0081-0x0091]
[ 1.100726] pnp 00:02: [io 0x0093-0x009f]
[ 1.100727] pnp 00:02: [io 0x00c0-0x00df]
[ 1.100728] pnp 00:02: [dma 4]
[ 1.100742] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.100747] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.100761] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.100814] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.100828] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.100836] pnp 00:05: [io 0x002e-0x002f]
[ 1.100837] pnp 00:05: [io 0x004e-0x004f]
[ 1.100838] pnp 00:05: [io 0x0061]
[ 1.100839] pnp 00:05: [io 0x0063]
[ 1.100840] pnp 00:05: [io 0x0065]
[ 1.100841] pnp 00:05: [io 0x0067]
[ 1.100842] pnp 00:05: [io 0x0070]
[ 1.100842] pnp 00:05: [io 0x0080]
[ 1.100843] pnp 00:05: [io 0x0092]
[ 1.100844] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.100845] pnp 00:05: [io 0x0680-0x069f]
[ 1.100846] pnp 00:05: [io 0x0200-0x020f]
[ 1.100847] pnp 00:05: [io 0xffff]
[ 1.100848] pnp 00:05: [io 0xffff]
[ 1.100849] pnp 00:05: [io 0x0400-0x0453]
[ 1.100851] pnp 00:05: [io 0x0458-0x047f]
[ 1.100852] pnp 00:05: [io 0x0500-0x057f]
[ 1.100853] pnp 00:05: [io 0x164e-0x164f]
[ 1.100881] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.100935] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.100989] system 00:05: [io 0xffff] has been reserved
[ 1.101041] system 00:05: [io 0xffff] has been reserved
[ 1.101094] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.101147] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.101200] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.101253] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.101307] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.101313] pnp 00:06: [io 0x0070-0x0077]
[ 1.101320] pnp 00:06: [irq 8]
[ 1.101335] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.101353] pnp 00:07: [io 0x0454-0x0457]
[ 1.101377] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.101431] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.101474] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.101475] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.101476] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.101478] pnp 00:08: [io 0x0290-0x029f]
[ 1.101479] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.101505] system 00:08: [io 0x0290-0x029f] has been reserved
[ 1.101558] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.101573] pnp 00:09: [io 0x0010-0x001f]
[ 1.101574] pnp 00:09: [io 0x0022-0x003f]
[ 1.101575] pnp 00:09: [io 0x0044-0x005f]
[ 1.101576] pnp 00:09: [io 0x0062-0x0063]
[ 1.101577] pnp 00:09: [io 0x0065-0x006f]
[ 1.101578] pnp 00:09: [io 0x0072-0x007f]
[ 1.101579] pnp 00:09: [io 0x0080]
[ 1.101580] pnp 00:09: [io 0x0084-0x0086]
[ 1.101581] pnp 00:09: [io 0x0088]
[ 1.101582] pnp 00:09: [io 0x008c-0x008e]
[ 1.101583] pnp 00:09: [io 0x0090-0x009f]
[ 1.101584] pnp 00:09: [io 0x00a2-0x00bf]
[ 1.101585] pnp 00:09: [io 0x00e0-0x00ef]
[ 1.101586] pnp 00:09: [io 0x04d0-0x04d1]
[ 1.101613] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.101667] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.101672] pnp 00:0a: [io 0x00f0-0x00ff]
[ 1.101677] pnp 00:0a: [irq 13]
[ 1.101692] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.101872] pnp 00:0b: [io 0x03f8-0x03ff]
[ 1.101877] pnp 00:0b: [irq 4]
[ 1.101878] pnp 00:0b: [dma 0 disabled]
[ 1.101917] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.102058] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.102059] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.102060] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.102061] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.102062] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.102063] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.102064] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.102065] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.102066] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.102067] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.102068] pnp 00:0c: [mem 0xdf200000-0xdf200fff]
[ 1.102107] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.102161] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.102215] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.102269] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.102324] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.102378] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.102432] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.102486] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.102540] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.102594] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.102649] system 00:0c: [mem 0xdf200000-0xdf200fff] has been reserved
[ 1.102703] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.102800] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.102801] pnp 00:0d: [mem 0x40004000-0x40004fff]
[ 1.102838] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.102892] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[ 1.102946] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.102961] pnp: PnP ACPI: found 14 devices
[ 1.103017] ACPI: ACPI bus type pnp unregistered
[ 1.108958] PCI: max bus depth: 2 pci_try_num: 3
[ 1.109013] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf300000-0xdf4fffff]
[ 1.109069] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf500000-0xdf6fffff 64bit pref]
[ 1.109135] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.109188] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.109243] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.109296] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.109354] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf4fffff]
[ 1.109410] pci 0000:00:1c.0: bridge window [mem 0xdf500000-0xdf6fffff 64bit pref]
[ 1.109481] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 1.109533] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 1.109591] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.109659] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 1.109713] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
[ 1.109783] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 1.109836] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 1.109897] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[ 1.109950] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 1.110006] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.110066] pci 0000:00:1c.7: PCI bridge to [bus 07-07]
[ 1.110121] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.110187] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.110242] pci 0000:00:01.0: setting latency timer to 64
[ 1.110247] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.110304] pci 0000:00:1c.0: setting latency timer to 64
[ 1.110308] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.110364] pci 0000:00:1c.4: setting latency timer to 64
[ 1.110371] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.110427] pci 0000:00:1c.5: setting latency timer to 64
[ 1.110431] pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.110489] pci 0000:04:00.0: setting latency timer to 64
[ 1.110497] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.110552] pci 0000:00:1c.6: setting latency timer to 64
[ 1.110559] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.110615] pci 0000:00:1c.7: setting latency timer to 64
[ 1.110617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.110619] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.110620] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.110621] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.110622] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.110623] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.110624] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.110626] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.110627] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.110628] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 1.110629] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.110630] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf4fffff]
[ 1.110632] pci_bus 0000:02: resource 2 [mem 0xdf500000-0xdf6fffff 64bit pref]
[ 1.110633] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.110634] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.110635] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.110636] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.110637] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.110639] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.110640] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.110641] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.110642] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.110643] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.110644] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.110645] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.110647] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
[ 1.110648] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 1.110649] pci_bus 0000:05: resource 4 [io 0xd000-0xdfff]
[ 1.110650] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
[ 1.110651] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
[ 1.110652] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[ 1.110653] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 1.110655] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 1.110656] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 1.110657] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 1.110658] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 1.110659] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 1.110660] pci_bus 0000:05: resource 17 [mem 0xdf200000-0xfeafffff]
[ 1.110662] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 1.110663] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.110664] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 1.110740] NET: Registered protocol family 2
[ 1.111067] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.113087] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.114107] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.114275] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.114330] TCP reno registered
[ 1.114410] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.114550] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.114748] NET: Registered protocol family 1
[ 1.114807] pci 0000:00:02.0: Boot video device
[ 1.114814] pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.114907] pci 0000:00:14.0: PCI INT A disabled
[ 1.114970] pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.134980] pci 0000:00:1a.0: PCI INT A disabled
[ 1.135061] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.154953] pci 0000:00:1d.0: PCI INT A disabled
[ 1.155043] pci 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.155131] pci 0000:07:00.0: PCI INT A disabled
[ 1.155185] PCI: CLS 64 bytes, default 64
[ 1.155215] Unpacking initramfs...
[ 1.302646] Freeing initrd memory: 11192k freed
[ 1.303517] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.303572] Placing 64MB software IO TLB between ffff8800d4fc6000 - ffff8800d8fc6000
[ 1.303636] software IO TLB at phys 0xd4fc6000 - 0xd8fc6000
[ 1.304197] audit: initializing netlink socket (disabled)
[ 1.304257] type=2000 audit(1349123819.028:1): initialized
[ 1.343495] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.403100] VFS: Disk quotas dquot_6.5.2
[ 1.403180] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.403292] msgmni has been set to 32768
[ 1.403463] alg: No test for stdrng (krng)
[ 1.403542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.403607] io scheduler noop registered
[ 1.403657] io scheduler deadline registered
[ 1.403731] io scheduler cfq registered (default)
[ 1.403846] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.403866] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.404091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.404157] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.404211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.404513] intel_idle: does not run on family 6 model 58
[ 1.404530] ERST: Table is not found!
[ 1.404580] GHES: HEST is not enabled!
[ 1.404667] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.425091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.607105] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.654662] Linux agpgart interface v0.103
[ 1.654765] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.654890] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.655990] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.656146] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.656298] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.658479] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.658535] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.658669] mousedev: PS/2 mouse device common for all mice
[ 1.658753] rtc_cmos 00:06: RTC can wake from S4
[ 1.658894] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.658969] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.659032] cpuidle: using governor ladder
[ 1.659083] cpuidle: using governor menu
[ 1.659240] TCP cubic registered
[ 1.659358] NET: Registered protocol family 10
[ 1.659698] Mobile IPv6
[ 1.659748] NET: Registered protocol family 17
[ 1.659800] Registering the dns_resolver key type
[ 1.659926] PM: Hibernation image not present or could not be loaded.
[ 1.659933] registered taskstats version 1
[ 1.690001] rtc_cmos 00:06: setting system clock to 2012-10-01 20:36:59 UTC (1349123819)
[ 1.690116] Initializing network drop monitor service
[ 1.690826] Freeing unused kernel memory: 572k freed
[ 1.690928] Write protecting the kernel read-only data: 6144k
[ 1.692350] Freeing unused kernel memory: 668k freed
[ 1.693802] Freeing unused kernel memory: 684k freed
[ 1.700117] udevd[72]: starting version 175
[ 1.708805] ACPI: Fan [FAN0] (off)
[ 1.708896] ACPI: Fan [FAN1] (off)
[ 1.709159] ACPI: Fan [FAN2] (off)
[ 1.709243] ACPI: Fan [FAN3] (off)
[ 1.709328] ACPI: Fan [FAN4] (off)
[ 1.709424] usbcore: registered new interface driver usbfs
[ 1.709498] usbcore: registered new interface driver hub
[ 1.710669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.710742] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.710838] r8169 0000:03:00.0: setting latency timer to 64
[ 1.710923] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.711216] usbcore: registered new device driver usb
[ 1.711267] r8169 0000:03:00.0: eth0: RTL8168f/8111f at 0xffffc9000304e000, c8:60:00:c1:5b:fc, XID 08000800 IRQ 43
[ 1.711269] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.712077] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.712271] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.712274] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.712455] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.712816] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.712832] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7e00000
[ 1.712899] xhci_hcd 0000:00:14.0: Failed to enable MSI-X
[ 1.713102] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 1.713144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.713203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.713270] usb usb1: Product: xHCI Host Controller
[ 1.713326] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.713383] usb usb1: SerialNumber: 0000:00:14.0
[ 1.713584] xHCI xhci_add_endpoint called for root hub
[ 1.713585] SCSI subsystem initialized
[ 1.713641] xHCI xhci_check_bandwidth called for root hub
[ 1.713671] hub 1-0:1.0: USB hub found
[ 1.713730] hub 1-0:1.0: 4 ports detected
[ 1.713929] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.713989] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.714072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.714130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.714198] usb usb2: Product: xHCI Host Controller
[ 1.714253] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.714309] usb usb2: SerialNumber: 0000:00:14.0
[ 1.714540] xHCI xhci_add_endpoint called for root hub
[ 1.714542] xHCI xhci_check_bandwidth called for root hub
[ 1.714567] hub 2-0:1.0: USB hub found
[ 1.714625] hub 2-0:1.0: 4 ports detected
[ 1.715076] libata version 3.00 loaded.
[ 1.738748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.742638] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.742695] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.742851] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.742907] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.746448] ahci 0000:00:1f.2: version 3.0
[ 1.746457] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.746461] xhci_hcd 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.746587] xhci_hcd 0000:07:00.0: setting latency timer to 64
[ 1.746591] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.746627] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.746666] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[ 1.746696] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.746698] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.746701] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.778681] scsi0 : ahci
[ 1.778869] scsi1 : ahci
[ 1.779012] scsi2 : ahci
[ 1.779153] scsi3 : ahci
[ 1.779299] scsi4 : ahci
[ 1.779439] scsi5 : ahci
[ 1.779718] ata1: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12100 irq 45
[ 1.779848] ata2: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12180 irq 45
[ 1.779979] ata3: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12200 irq 45
[ 1.780109] ata4: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12280 irq 45
[ 1.780240] ata5: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12300 irq 45
[ 1.780368] ata6: DUMMY
[ 1.780481] ahci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.780485] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.780511] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.780517] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.780524] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 1.780564] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.781737] ahci 0000:06:00.0: irq 46 for MSI/MSI-X
[ 1.781859] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.782168] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.782491] ahci 0000:06:00.0: setting latency timer to 64
[ 1.782736] scsi6 : ahci
[ 1.782970] scsi7 : ahci
[ 1.783186] ata7: SATA max UDMA/133 abar m2048@0xf7d15000 port 0xf7d15100 irq 46
[ 1.783496] ata8: SATA max UDMA/133 abar m2048@0xf7d15000 port 0xf7d15180 irq 46
[ 1.784442] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.784452] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7e14000
[ 1.798347] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.798459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.798563] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.798690] usb usb4: Product: EHCI Host Controller
[ 1.798788] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.798889] usb usb4: SerialNumber: 0000:00:1a.0
[ 1.799053] hub 4-0:1.0: USB hub found
[ 1.799151] hub 4-0:1.0: 2 ports detected
[ 1.799290] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.799409] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.799411] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.799513] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.799665] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.803649] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.803652] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e13000
[ 1.807953] xhci_hcd 0000:07:00.0: irq 19, io mem 0xf7c00000
[ 1.808055] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 1.808059] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 1.808063] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 1.808066] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 1.808069] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 1.808073] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 1.808076] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 1.808080] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 1.808177] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.808231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.808295] usb usb3: Product: xHCI Host Controller
[ 1.809556] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.809608] usb usb3: SerialNumber: 0000:07:00.0
[ 1.809705] xHCI xhci_add_endpoint called for root hub
[ 1.809706] xHCI xhci_check_bandwidth called for root hub
[ 1.809725] hub 3-0:1.0: USB hub found
[ 1.809781] hub 3-0:1.0: 2 ports detected
[ 1.809870] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.809925] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 1.810010] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.810074] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.810138] usb usb6: Product: xHCI Host Controller
[ 1.810189] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.810242] usb usb6: SerialNumber: 0000:07:00.0
[ 1.810361] xHCI xhci_add_endpoint called for root hub
[ 1.810362] xHCI xhci_check_bandwidth called for root hub
[ 1.810378] hub 6-0:1.0: USB hub found
[ 1.810435] hub 6-0:1.0: 2 ports detected
[ 1.818322] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.818403] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.818457] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.818521] usb usb5: Product: EHCI Host Controller
[ 1.818573] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.818625] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.818735] hub 5-0:1.0: USB hub found
[ 1.818788] hub 5-0:1.0: 2 ports detected
[ 2.026118] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 2.046110] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.047097] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.047805] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.047885] usb 1-2: New USB device found, idVendor=046d, idProduct=c31c
[ 2.047939] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.047994] usb 1-2: Product: USB Keyboard
[ 2.048044] usb 1-2: Manufacturer: Logitech
[ 2.048138] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.048206] usb 1-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.049428] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.050427] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.051426] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.098053] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.098137] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.098206] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.098276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.098344] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.098779] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.098965] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88081bcb7498), AE_NOT_FOUND (20110623/psparse-536)
[ 2.099184] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 2.099471] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.099657] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88081bcb7600), AE_NOT_FOUND (20110623/psparse-536)
[ 2.099895] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.100076] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88081bcb7678), AE_NOT_FOUND (20110623/psparse-536)
[ 2.100313] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.100492] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88081bcb7498), AE_NOT_FOUND (20110623/psparse-536)
[ 2.100715] ata5.00: configured for UDMA/100
[ 2.100823] ata2.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 2.100898] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.100968] ata1.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 2.101026] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.102043] ata8: SATA link down (SStatus 0 SControl 330)
[ 2.102142] ata7: SATA link down (SStatus 0 SControl 330)
[ 2.102343] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.102529] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88081bcb7600), AE_NOT_FOUND (20110623/psparse-536)
[ 2.102769] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.102945] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88081bcb7678), AE_NOT_FOUND (20110623/psparse-536)
[ 2.103212] ata2.00: configured for UDMA/133
[ 2.103336] ata1.00: configured for UDMA/133
[ 2.103428] ACPI Error: [DSSP]
[ 2.103486] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.103621] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.103707] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.103810] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88081bcb7510), AE_NOT_FOUND (20110623/psparse-536)
[ 2.104162] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 2.104217] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.105307] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.105493] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bcb7588), AE_NOT_FOUND (20110623/psparse-536)
[ 2.106335] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 2.106409] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.109558] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.109744] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88081bcb7510), AE_NOT_FOUND (20110623/psparse-536)
[ 2.110524] ata4.00: configured for UDMA/133
[ 2.113415] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.113602] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bcb7588), AE_NOT_FOUND (20110623/psparse-536)
[ 2.114178] ata3.00: configured for UDMA/133
[ 2.114285] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 2.114461] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 2.115084] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 2.115414] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.115417] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.115420] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.115423] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 2.115474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.115479] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.115481] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.115483] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.115484] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.115502] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.115504] sd 0:0:0:0: [sda] Write Protect is off
[ 2.115506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.115509] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.115519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.116112] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 2.116230] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.116283] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.116304] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.124260] sda: sda1 sda2 sda3
[ 2.124480] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.126757] sdb: sdb1 sdb2 sdb3
[ 2.126992] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.131172] sdc: sdc1
[ 2.131362] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.134868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.134947] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.135020] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.135092] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.135165] scsi 4:0:0:0: Attached scsi generic sg4 type 5
[ 2.161995] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 2.294223] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.294297] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.294487] hub 4-1:1.0: USB hub found
[ 2.294591] hub 4-1:1.0: 6 ports detected
[ 2.301847] Refined TSC clocksource calibration: 3410.013 MHz.
[ 2.301918] Switching to clocksource tsc
[ 2.461676] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.477836] xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
[ 2.477945] xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
[ 2.478049] xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
[ 2.478124] usb 3-2: New USB device found, idVendor=04b8, idProduct=012c
[ 2.478179] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.478233] usb 3-2: Product: EPSON Scanner
[ 2.478283] usb 3-2: Manufacturer: EPSON
[ 2.478374] usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.478441] usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.513865] sdd: sdd1
[ 2.514062] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.516428] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.516494] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.516640] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.518973] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input0
[ 2.519069] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-2/input0
[ 2.523800] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.524115] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.524481] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[ 2.524711] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input1
[ 2.526013] generic-usb 0003:046D:

10-05-2012, 09:51 PM

On 2012-10-05 18:50, Jonathan Nieder wrote:

Javier Cantero wrote:

If it helps, I am using now linux-image-3.5-trunk-amd64
(3.5.2-1~experimental.1) kernel with no freezes since the change.

That's good to hear. Per, Ingo, does that work around trouble on
your machines, too?

I hade two freezes last saturday, and two the day after. The next freeze
was yesterday (five days later). So testing different options isn't that
easy.

So far I'm running whith the default wheezy kernel but with the iGPU
memory set to 256 MB. My plan was to run with this setting, and if I had
another crash, try the experimental kernel.

But let me know if you'd rather have me reset the video memory to the
default 64 MB and try the 3.5 kernel.

Btw, my mobo is is an Asus P8Z77-V LE.

/Per

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 506F564D.1090804@foreby.se">http://lists.debian.org/506F564D.1090804@foreby.se

10-05-2012, 09:53 PM

Per Foreby wrote:

> So far I'm running whith the default wheezy kernel but with the iGPU memory
> set to 256 MB. My plan was to run with this setting, and if I had another
> crash, try the experimental kernel.

That seems like a good plan.

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20121005215332.GA18879@elie.Belkin

10-06-2012, 02:29 AM

On 2012-10-05 23:53, Jonathan Nieder wrote:

Per Foreby wrote:

So far I'm running whith the default wheezy kernel but with the iGPU memory
set to 256 MB. My plan was to run with this setting, and if I had another
crash, try the experimental kernel.

That seems like a good plan.

New freeze. Last entry in the debug log was more than 10 minutes before
the freeze.

Now running 3.5-trunk-amd64 #1 SMP Debian 3.5.5-1~experimental.1 (still
with 256 MB iGPU Memory).

/Per

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 506F9798.80008@foreby.se">http://lists.debian.org/506F9798.80008@foreby.se

10-06-2012, 10:04 AM

Am 05.10.2012 23:53, schrieb Jonathan Nieder:
> Per Foreby wrote:
>
>> So far I'm running whith the default wheezy kernel but with the iGPU memory
>> set to 256 MB. My plan was to run with this setting, and if I had another
>> crash, try the experimental kernel.
>
> That seems like a good plan.
>

With me all is still fine since 1 week, however that does not mean its
fixed. I am right now trying to stress my machine with high memory loads
and graphics to verify the workaround.

So far we have only 2 common things in all cases:

a) it happens when browsing with iceweasel - Javier can you also
confirm this?

b) appears to be hardware/BIOS dependent and we all have > 4GiB RAM
installed.

There obviously is different memory allocvation/interpretation,
depending from where you gather the information:

physical RAM installed
8GiB = 8.192MiB = 8.388.608 kiB

cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
reg01: base=0x200000000 ( 8192MB), size= 512MB, count=1: write-back
reg02: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
reg03: base=0x0dc000000 ( 3520MB), size= 64MB, count=1: uncachable
reg04: base=0x0db800000 ( 3512MB), size= 8MB, count=1: uncachable
reg05: base=0x21f800000 ( 8696MB), size= 8MB, count=1: uncachable
reg06: base=0x21f600000 ( 8694MB), size= 2MB, count=1: uncachable

cat /proc/meminfo
MemTotal: 8095128 kB
MemFree: 7543424 kB
Buffers: 37428 kB
Cached: 285136 kB
SwapCached: 0 kB
Active: 178696 kB
Inactive: 280040 kB
Active(anon): 136512 kB
Inactive(anon): 68272 kB
Active(file): 42184 kB
Inactive(file): 211768 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 28 kB
Writeback: 0 kB
AnonPages: 136164 kB
Mapped: 58996 kB
Shmem: 68620 kB
Slab: 37120 kB
SReclaimable: 16488 kB
SUnreclaim: 20632 kB
KernelStack: 2096 kB
PageTables: 16172 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 4047564 kB
Committed_AS: 712296 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 367656 kB
VmallocChunk: 34359368791 kB
HardwareCorrupted: 0 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 49152 kB
DirectMap2M: 8247296 kB

It would also be interesting whether Javier
gets a mtrr with write-combining with the new kernel and
whether BIOS settings for videoRAM are respected by the i915 module.

Ingo

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 5070021A.4030401@gmx.net">http://lists.debian.org/5070021A.4030401@gmx.net

10-06-2012, 11:03 AM

Ingo wrote:

With me all is still fine since 1 week, however that does not mean its
fixed. I am right now trying to stress my machine with high memory loads
and graphics to verify the workaround.

I have also tried the stress tactics, but it doesn't seem to have
anything to do with load.

a) it happens when browsing with iceweasel - Javier can you also
confirm this?

Not iceweasel in my case. I like my browsers bleading edge, so I use the
64-bit version of vanilla firefox. And my freezes have happened on
various mouse or kbd input, not only klicking a link in the web browser
(see my original bug report).

/Per

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 50701002.1040204@foreby.se">http://lists.debian.org/50701002.1040204@foreby.se