FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-09-2012, 06:44 PM
Jonathan Nieder
 
Default Bug#679545: IA64 (Itanium) Wheezy, doesn't detect DVD drive and NIC, patch proposal

reassign 679545 src:linux
quit

Hi Stephan,

Stephan Schreiber wrote:

> First problem, the build-in IDE/PATA host adapter of the chipset
> isn't detected

Let's start with this part. Please file a new bug if any other issues
exist after it's fixed.

[...]
> The host adapter has the PCI-ID Intel, 24cb.

This adapter is handled by the libata piix driver
(drivers/ata/piix.c):

/* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */
{ 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
{ 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },

[...]
> Please could we include the ide/piix again as a module - just for
> the IA64 architecture?

I think we should not do that, if at all possible. The old IDE
subsystem has a number of problems --- e.g., see

http://www.mail-archive.com/stable@vger.kernel.org/msg15564.html

for a recent report.

Can you get a full kernel log ("dmesg" output) from booting with the
usual Debian kernel (a squeeze, wheezy, or experimental kernel will
do) on the installed system?

Thanks much,
Jonathan


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20120909184446.GA520@mannheim-rule.local
 
Old 09-09-2012, 07:36 PM
Stephan Schreiber
 
Default Bug#679545: IA64 (Itanium) Wheezy, doesn't detect DVD drive and NIC, patch proposal

Hello,

I just installed the unmodified Wheezy kernel
(linux-image-3.2.0-3-mckinley_3.2.23.1_ia64.deb).


The dmesg output is attached.

Kind regards
Stephan Schreiber

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-mckinley (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 09:01:02 UTC 2012
[ 0.000000] EFI v1.10 by INTEL: SALsystab=0x7fe4c8c0 ACPI=0x7ff99000 ACPI 2.0=0x7ff98000 MPS=0x7ff97000 SMBIOS=0xf0000
[ 0.000000] booting generic kernel on platform dig
[ 0.000000] ACPI: RSDP 000000007ff98000 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000007ff98090 00034 (v01 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ACPI: FACP 000000007ff98138 000F4 (v03 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ACPI: DSDT 000000007ff9a000 02937 (v01 Intel SR870BH2 00000000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 000000007ff982e0 00040
[ 0.000000] ACPI: APIC 000000007ff98230 000AE (v01 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe0000001fdd2a000 (18856835 bytes)
[ 0.000000] SAL 3.1: Intel Corp SR870BH2 version 3.0
[ 0.000000] SAL Platform features: BusLock IRQ_Redirection
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xf0
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007ffffe400000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000400 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x00080000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000400 -> 0x0001fe80
[ 0.000000] 0: 0x0001ffa6 -> 0x0001ffd1
[ 0.000000] 0: 0x00060000 -> 0x0007ff84
[ 0.000000] 0: 0x0007ffa0 -> 0x0007ffed
[ 0.000000] On node 0 totalpages: 260732
[ 0.000000] free_area_init_node: node 0, pgdat e000000001900000, node_mem_map a0007ffffe40e000
[ 0.000000] DMA zone: 893 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 128814 pages, LIFO batch:7
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 130129 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s13824 r8192 d240128 u262144 alloc=16*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258943
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sdb5 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between e000000004cb4000 - e000000008cb4000
[ 0.000000] software IO TLB at phys 0x4cb4000 - 0x8cb4000
[ 0.000000] Memory: 4050880k/4140208k available (7801k code, 120832k reserved, 4455k data, 1184k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:1024
[ 0.000000] ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
[ 0.000000] register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
[ 0.000000] CPU 0: base freq=199.463MHz, ITC ratio=15/2, ITC freq=1495.974MHz
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.004000] Calibrating delay loop... 2232.32 BogoMIPS (lpj=4464640)
[ 0.032047] pid_max: default: 32768 minimum: 301
[ 0.032268] Security Framework initialized
[ 0.032319] AppArmor: AppArmor disabled by boot time parameter
[ 0.032557] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.037677] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.040334] Mount-cache hash table entries: 1024
[ 0.041016] Initializing cgroup subsys cpuacct
[ 0.041093] Initializing cgroup subsys memory
[ 0.041408] Initializing cgroup subsys devices
[ 0.041451] Initializing cgroup subsys freezer
[ 0.041492] Initializing cgroup subsys net_cls
[ 0.041536] Initializing cgroup subsys blkio
[ 0.041637] ACPI: Core revision 20110623
[ 0.044248] Boot processor id 0x0/0xc018
[ 0.000000] Fixed BSP b0 value from CPU 1
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff 5 cycles, maxerr 534 cycles)
[ 0.000000] CPU 1: base freq=199.463MHz, ITC ratio=15/2, ITC freq=1495.974MHz
[ 0.050921] Brought up 2 CPUs
[ 0.050963] Total of 2 processors activated (4464.64 BogoMIPS).
[ 0.051837] devtmpfs: initialized
[ 0.052499] DMI 2.3 present.
[ 0.052568] DMI: Intel MP Server /Main Board , BIOS S870BH2A.86B.0178.P06.0405281505 05/28/2004
[ 0.052925] print_constraints: dummy:
[ 0.053157] NET: Registered protocol family 16
[ 0.053359] ACPI: bus type pci registered
[ 0.054868] bio: create slab <bio-0> at 0
[ 0.055206] ACPI: Added _OSI(Module Device)
[ 0.055248] ACPI: Added _OSI(Processor Device)
[ 0.055290] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.055332] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056073] ACPI: EC: Look up EC in DSDT
[ 0.058899] ACPI: Interpreter enabled
[ 0.058938] ACPI: (supports S0 S5)
[ 0.059017] ACPI: Using IOSAPIC for interrupt routing
[ 0.062594] ACPI: No dock devices found.
[ 0.063372] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
[ 0.064822] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000fffff]
[ 0.064887] pci_root PNP0A03:00: host bridge window [mem 0xfa000000-0xfbffffff]
[ 0.064951] pci_root PNP0A03:00: host bridge window [mem 0xff000000-0xffffffff]
[ 0.065015] pci_root PNP0A03:00: host bridge window [mem 0xfec00000-0xfec0ffff]
[ 0.065081] pci_root PNP0A03:00: host bridge window [io 0x0000-0xcfff]
[ 0.065224] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.065270] pci 0000:00:1d.0: reg 20: [io 0xbcc0-0xbcdf]
[ 0.065317] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.065358] pci 0000:00:1d.1: reg 20: [io 0xbce0-0xbcff]
[ 0.065398] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.065442] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[ 0.065516] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[ 0.065530] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.065541] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.065552] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.065563] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.065574] pci 0000:00:1f.1: reg 20: [io 0x1000-0x100f]
[ 0.065585] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.065644] pci 0000:01:01.0: [1002:4752] type 0 class 0x000300
[ 0.065660] pci 0000:01:01.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.065671] pci 0000:01:01.0: reg 14: [io 0xcc00-0xccff]
[ 0.065682] pci 0000:01:01.0: reg 18: [mem 0xfaff0000-0xfaff0fff]
[ 0.065714] pci 0000:01:01.0: reg 30: [mem 0xfafc0000-0xfafdffff pref]
[ 0.065723] pci 0000:01:01.0: Boot video device
[ 0.065746] pci 0000:01:01.0: supports D1 D2
[ 0.065783] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.065829] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.065835] pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfbffffff]
[ 0.065852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.065897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT]
[ 0.065913] ACPI Warning: For \_SB_.PCI0.H2PB._PRT: Return Package has no elements (empty) (20110623/nspredef-463)
[ 0.066033] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.066079] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.066145] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.067534] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 02-04])
[ 0.068914] pci_root PNP0A03:01: host bridge window [mem 0xf9000000-0xf9ffffff]
[ 0.068979] pci_root PNP0A03:01: host bridge window [mem 0xfec10000-0xfec2ffff]
[ 0.069044] pci_root PNP0A03:01: host bridge window [io 0xd000-0xefff]
[ 0.069178] pci 0000:02:1c.0: [8086:1461] type 0 class 0x000800
[ 0.069192] pci 0000:02:1c.0: reg 10: [mem 0xf9bf0000-0xf9bf0fff]
[ 0.069262] pci 0000:02:1d.0: [8086:1460] type 1 class 0x000604
[ 0.069318] pci 0000:02:1e.0: [8086:1461] type 0 class 0x000800
[ 0.069332] pci 0000:02:1e.0: reg 10: [mem 0xf9be0000-0xf9be0fff]
[ 0.069399] pci 0000:02:1f.0: [8086:1460] type 1 class 0x000604
[ 0.069476] pci 0000:03:01.0: [1000:0030] type 0 class 0x000100
[ 0.069496] pci 0000:03:01.0: reg 10: [io 0xd800-0xd8ff]
[ 0.069510] pci 0000:03:01.0: reg 14: [mem 0xf9ed0000-0xf9edffff 64bit]
[ 0.069525] pci 0000:03:01.0: reg 1c: [mem 0xf9ec0000-0xf9ecffff 64bit]
[ 0.069542] pci 0000:03:01.0: reg 30: [mem 0xf9c00000-0xf9cfffff pref]
[ 0.069579] pci 0000:03:01.0: supports D1 D2
[ 0.069610] pci 0000:03:01.1: [1000:0030] type 0 class 0x000100
[ 0.069629] pci 0000:03:01.1: reg 10: [io 0xdc00-0xdcff]
[ 0.069644] pci 0000:03:01.1: reg 14: [mem 0xf9ef0000-0xf9efffff 64bit]
[ 0.069658] pci 0000:03:01.1: reg 1c: [mem 0xf9ee0000-0xf9eeffff 64bit]
[ 0.069676] pci 0000:03:01.1: reg 30: [mem 0xf9d00000-0xf9dfffff pref]
[ 0.069712] pci 0000:03:01.1: supports D1 D2
[ 0.069757] pci 0000:02:1d.0: PCI bridge to [bus 03-03]
[ 0.069802] pci 0000:02:1d.0: bridge window [io 0xd000-0xdfff]
[ 0.069808] pci 0000:02:1d.0: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.069848] pci 0000:04:01.0: [8086:1010] type 0 class 0x000200
[ 0.069870] pci 0000:04:01.0: reg 10: [mem 0xf9fc0000-0xf9fdffff 64bit]
[ 0.069893] pci 0000:04:01.0: reg 20: [io 0xec80-0xecbf]
[ 0.069943] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.069950] pci 0000:04:01.0: PME# disabled
[ 0.069976] pci 0000:04:01.1: [8086:1010] type 0 class 0x000200
[ 0.069997] pci 0000:04:01.1: reg 10: [mem 0xf9fe0000-0xf9ffffff 64bit]
[ 0.070021] pci 0000:04:01.1: reg 20: [io 0xecc0-0xecff]
[ 0.070070] pci 0000:04:01.1: PME# supported from D0 D3hot D3cold
[ 0.070076] pci 0000:04:01.1: PME# disabled
[ 0.070121] pci 0000:02:1f.0: PCI bridge to [bus 04-04]
[ 0.070166] pci 0000:02:1f.0: bridge window [io 0xe000-0xefff]
[ 0.070172] pci 0000:02:1f.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.070196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT]
[ 0.070232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT]
[ 0.070258] pci0000:02: Requesting ACPI _OSC control (0x1d)
[ 0.070304] pci0000:02: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.070369] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.071622] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 05-07])
[ 0.072954] pci_root PNP0A03:02: host bridge window [mem 0xf8000000-0xf8ffffff]
[ 0.073019] pci_root PNP0A03:02: host bridge window [mem 0xfec30000-0xfec4ffff]
[ 0.073171] pci 0000:05:1c.0: [8086:1461] type 0 class 0x000800
[ 0.073186] pci 0000:05:1c.0: reg 10: [mem 0xf8ff0000-0xf8ff0fff]
[ 0.073255] pci 0000:05:1d.0: [8086:1460] type 1 class 0x000604
[ 0.073311] pci 0000:05:1e.0: [8086:1461] type 0 class 0x000800
[ 0.073325] pci 0000:05:1e.0: reg 10: [mem 0xf8fe0000-0xf8fe0fff]
[ 0.073393] pci 0000:05:1f.0: [8086:1460] type 1 class 0x000604
[ 0.073486] pci 0000:05:1d.0: PCI bridge to [bus 06-06]
[ 0.073580] pci 0000:05:1f.0: PCI bridge to [bus 07-07]
[ 0.073645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PA._PRT]
[ 0.073684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PB._PRT]
[ 0.073730] pci0000:05: Requesting ACPI _OSC control (0x1d)
[ 0.073776] pci0000:05: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.073841] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.077548] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.077548] vgaarb: loaded
[ 0.077548] vgaarb: bridge control possible 0000:01:01.0
[ 0.077548] Switching to clocksource itc
[ 0.077548] pnp: PnP ACPI init
[ 0.077548] ACPI: bus type pnp registered
[ 0.077548] pnp 00:00: [bus 00-01]
[ 0.077548] pnp 00:00: [mem 0x000a0000-0x000fffff window]
[ 0.077548] pnp 00:00: [mem 0xfa000000-0xfbffffff window]
[ 0.077548] pnp 00:00: [mem 0xff000000-0xffffffff window]
[ 0.077548] pnp 00:00: [mem 0xfec00000-0xfec0ffff window]
[ 0.077548] pnp 00:00: [io 0x0000-0xcfff window]
[ 0.077548] pnp 00:00: [io 0xffff-0x0000 window]
[ 0.077548] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.077548] pnp 00:01: [io 0x0010-0x001f]
[ 0.077548] pnp 00:01: [io 0x0022-0x002d]
[ 0.077548] pnp 00:01: [io 0x0030-0x003f]
[ 0.077548] pnp 00:01: [io 0x0044-0x005f]
[ 0.077548] pnp 00:01: [io 0x0062-0x0063]
[ 0.077548] pnp 00:01: [io 0x0065-0x006f]
[ 0.077548] pnp 00:01: [io 0x0072-0x007f]
[ 0.077548] pnp 00:01: [io 0x0080]
[ 0.077548] pnp 00:01: [io 0x0084-0x0086]
[ 0.077548] pnp 00:01: [io 0x0088]
[ 0.077548] pnp 00:01: [io 0x008c-0x008e]
[ 0.077548] pnp 00:01: [io 0x0090-0x009f]
[ 0.077548] pnp 00:01: [io 0x00a2-0x00bd]
[ 0.077548] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.077548] pnp 00:01: [io 0x08a0-0x08a3]
[ 0.077548] pnp 00:01: [io 0x0cc0-0x0ccf]
[ 0.077548] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.077548] pnp 00:01: [io 0x0c00-0x0c07]
[ 0.077548] pnp 00:01: [io 0x0000-0xffffffffffffffff disabled]
[ 0.077548] pnp 00:01: [mem 0xfec00000-0xfec0ffff]
[ 0.077548] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.077548] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.077548] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.077548] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.077548] system 00:01: [io 0x0c00-0x0c07] has been reserved
[ 0.077548] system 00:01: [mem 0xfec00000-0xfec0ffff] has been reserved
[ 0.077585] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.077633] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077654] pnp 00:02: [dma 4]
[ 0.077658] pnp 00:02: [io 0x0000-0x000f]
[ 0.077662] pnp 00:02: [io 0x0081-0x0083]
[ 0.077666] pnp 00:02: [io 0x0087]
[ 0.077670] pnp 00:02: [io 0x0089-0x008b]
[ 0.077674] pnp 00:02: [io 0x008f]
[ 0.077678] pnp 00:02: [io 0x00c0-0x00df]
[ 0.077719] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.077738] pnp 00:03: [io 0x0070-0x0071]
[ 0.077743] pnp 00:03: [irq 40]
[ 0.077780] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077795] pnp 00:04: [io 0x0061]
[ 0.077833] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.077880] pnp 00:05: [mem 0xffc00000-0xffffffff]
[ 0.077885] pnp 00:05: [mem 0xff400000-0xff5fffff]
[ 0.077889] pnp 00:05: [mem 0xff000000-0xff1fffff]
[ 0.077927] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.077995] pnp 00:06: [io 0x002e-0x002f]
[ 0.078055] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.078492] pnp 00:07: [irq 42]
[ 0.078496] pnp 00:07: [dma 2]
[ 0.078500] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.078503] pnp 00:07: [io 0x03f7]
[ 0.078613] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.079020] pnp 00:08: [irq 44]
[ 0.079024] pnp 00:08: [dma 0 disabled]
[ 0.079028] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.079033] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.079140] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.079546] pnp 00:09: [irq 45]
[ 0.079550] pnp 00:09: [dma 0 disabled]
[ 0.079554] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.079558] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.079665] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.080372] pnp 00:0a: [bus 02-04]
[ 0.080377] pnp 00:0a: [mem 0xffffffff-0x00000000 window]
[ 0.080381] pnp 00:0a: [mem 0xf9000000-0xf9ffffff window]
[ 0.080386] pnp 00:0a: [mem 0xffffffff-0x00000000 window]
[ 0.080391] pnp 00:0a: [mem 0xfec10000-0xfec2ffff window]
[ 0.080395] pnp 00:0a: [io 0xd000-0xefff window]
[ 0.080399] pnp 00:0a: [io 0xffff-0x0000 window]
[ 0.080443] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.081125] pnp 00:0b: [bus 05-07]
[ 0.081130] pnp 00:0b: [mem 0xffffffff-0x00000000 window]
[ 0.081135] pnp 00:0b: [mem 0xf8000000-0xf8ffffff window]
[ 0.081139] pnp 00:0b: [mem 0xffffffff-0x00000000 window]
[ 0.081144] pnp 00:0b: [mem 0xfec30000-0xfec4ffff window]
[ 0.081148] pnp 00:0b: [io 0xffff-0x0000 window]
[ 0.081153] pnp 00:0b: [io 0xffff-0x0000 window]
[ 0.081198] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.081280] pnp: PnP ACPI: found 12 devices
[ 0.081320] ACPI: ACPI bus type pnp unregistered
[ 0.086321] NET: Registered protocol family 2
[ 0.086582] IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.087979] TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
[ 0.097443] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 0.098734] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.098782] TCP reno registered
[ 0.098828] UDP hash table entries: 2048 (order: 2, 65536 bytes)
[ 0.099007] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
[ 0.099532] NET: Registered protocol family 1
[ 0.099689] GSI 16 (level, low) -> CPU 0 (0xc018) vector 49
[ 0.099738] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 49
[ 0.099800] pci 0000:00:1d.0: PCI INT A disabled
[ 0.099845] GSI 16 (level, low) -> CPU 0 (0xc018) vector 49 unregistered
[ 0.099909] GSI 19 (level, low) -> CPU 1 (0xc618) vector 49
[ 0.099954] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 50
[ 0.100013] pci 0000:00:1d.1: PCI INT B disabled
[ 0.100057] GSI 19 (level, low) -> CPU 1 (0xc618) vector 49 unregistered
[ 0.100164] PCI: CLS 128 bytes, default 128
[ 0.100299] Unpacking initramfs...
[ 0.763473] Freeing initrd memory: 18400kB freed
[ 0.764052] perfmon: version 2.0 IRQ 238
[ 0.764102] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[ 0.764871] perfmon: added sampling format default_format
[ 0.764916] perfmon_default_smpl: default_format v2.0 registered
[ 1.175985] audit: initializing netlink socket (disabled)
[ 1.176049] type=2000 audit(1347225800.171:1): initialized
[ 1.212170] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 1.212740] VFS: Disk quotas dquot_6.5.2
[ 1.214001] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.214298] msgmni has been set to 7947
[ 1.214718] alg: No test for stdrng (krng)
[ 1.214818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.214884] io scheduler noop registered
[ 1.214925] io scheduler deadline registered
[ 1.215014] io scheduler cfq registered (default)
[ 1.215339] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.215431] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.215478] sn_pci_hotplug_init: PROM version does not support hotplug.
[ 1.215736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.215806] ACPI: Power Button [PWRF]
[ 1.217471] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.238392] 00:08: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
[ 1.258969] 00:09: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
[ 1.259228] Linux agpgart interface v0.103
[ 1.259904] mousedev: PS/2 mouse device common for all mice
[ 1.260193] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 1.260666] TCP cubic registered
[ 1.260707] NET: Registered protocol family 17
[ 1.260759] Registering the dns_resolver key type
[ 1.260966] registered taskstats version 1
[ 1.261409] rtc-efi rtc-efi: setting system clock to 2012-09-09 21:23:20 UTC (1347225800)
[ 1.261581] Freeing unused kernel memory: 1184kB freed
[ 1.277891] udevd[47]: starting version 175
[ 1.322754] usbcore: registered new interface driver usbfs
[ 1.322848] usbcore: registered new interface driver hub
[ 1.322940] usbcore: registered new device driver usb
[ 1.323857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.324438] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.324599] GSI 16 (level, low) -> CPU 0 (0xc018) vector 49
[ 1.324652] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 49
[ 1.324713] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.324812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.324927] uhci_hcd 0000:00:1d.0: irq 49, io base 0x0000bcc0
[ 1.325059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.325107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.325170] usb usb1: Product: UHCI Host Controller
[ 1.325213] usb usb1: Manufacturer: Linux 3.2.0-3-mckinley uhci_hcd
[ 1.325258] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.325463] hub 1-0:1.0: USB hub found
[ 1.325508] hub 1-0:1.0: 2 ports detected
[ 1.325635] GSI 19 (level, low) -> CPU 1 (0xc618) vector 50
[ 1.325680] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 50
[ 1.325731] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.325783] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.325873] uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bce0
[ 1.325973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.326021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.326084] usb usb2: Product: UHCI Host Controller
[ 1.326132] usb usb2: Manufacturer: Linux 3.2.0-3-mckinley uhci_hcd
[ 1.326182] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.326339] hub 2-0:1.0: USB hub found
[ 1.326392] hub 2-0:1.0: 2 ports detected
[ 1.338081] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.338131] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.338277] GSI 24 (level, low) -> CPU 0 (0xc018) vector 51
[ 1.338323] e1000 0000:04:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 51
[ 1.400945] SCSI subsystem initialized
[ 1.404017] Fusion MPT base driver 3.04.20
[ 1.404057] Copyright (c) 1999-2008 LSI Corporation
[ 1.406705] Fusion MPT SPI Host driver 3.04.20
[ 1.406877] GSI 48 (level, low) -> CPU 1 (0xc618) vector 52
[ 1.406924] mptspi 0000:03:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 52
[ 1.465516] mptbase: ioc0: Initiating bringup
[ 1.640965] libata version 3.00 loaded.
[ 1.641656] ata_piix 0000:00:1f.1: version 2.13
[ 1.641671] ata_piix 0000:00:1f.1: device not available (can't reserve [mem 0x00000000-0x000003ff])
[ 1.641747] ata_piix: probe of 0000:00:1f.1 failed with error -22
[ 1.654496] e1000 0000:04:01.0: eth0: (PCI-X:133MHz:64-bit) 00:07:e9:23:d5:e8
[ 1.654555] e1000 0000:04:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.654704] GSI 25 (level, low) -> CPU 0 (0xc018) vector 53
[ 1.654749] e1000 0000:04:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 53
[ 1.962412] e1000 0000:04:01.1: eth1: (PCI-X:133MHz:64-bit) 00:07:e9:23:d5:e9
[ 1.962464] e1000 0000:04:01.1: eth1: Intel(R) PRO/1000 Network Connection
[ 2.021457] ioc0: LSI53C1030 C0: Capabilities={Initiator}
[ 2.036648] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 2.224896] usb 1-1: New USB device found, idVendor=046a, idProduct=0011
[ 2.224944] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.272137] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
[ 2.272307] generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1/input0
[ 2.272551] usbcore: registered new interface driver usbhid
[ 2.272594] usbhid: USB HID core driver
[ 2.340856] usb 1-2: new low-speed USB device number 3 using uhci_hcd
[ 2.516840] usb 1-2: New USB device found, idVendor=046d, idProduct=c050
[ 2.516888] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.516936] usb 1-2: Product: USB-PS/2 Optical Mouse
[ 2.516978] usb 1-2: Manufacturer: Logitech
[ 2.533962] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2
[ 2.534196] generic-usb 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.846822] scsi0 : ioc0: LSI53C1030 C0, FwRev=01030a00h, Ports=1, MaxQ=222, IRQ=52
[ 3.219445] GSI 49 (level, low) -> CPU 1 (0xc618) vector 54
[ 3.219491] mptspi 0000:03:01.1: PCI INT B -> GSI 49 (level, low) -> IRQ 54
[ 3.219641] mptbase: ioc1: Initiating bringup
[ 4.752643] ioc1: LSI53C1030 C0: Capabilities={Initiator}
[ 5.586118] scsi1 : ioc1: LSI53C1030 C0, FwRev=01030a00h, Ports=1, MaxQ=222, IRQ=54
[ 5.994635] scsi: waiting for bus probes to complete ...
[ 7.044852] scsi 1:0:0:0: Direct-Access SEAGATE ST3300007LC D704 PQ: 0 ANSI: 3
[ 7.044929] scsi target1:0:0: Beginning Domain Validation
[ 7.058555] scsi target1:0:0: Ending Domain Validation
[ 7.058668] scsi target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 7.081987] scsi 1:0:1:0: Direct-Access SEAGATE ST3300007LC D704 PQ: 0 ANSI: 3
[ 7.082056] scsi target1:0:1: Beginning Domain Validation
[ 7.095767] scsi target1:0:1: Ending Domain Validation
[ 7.095878] scsi target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 8.102547] scsi 1:0:6:0: Processor ESG-SHV SCA HSBP M24 1.0D PQ: 0 ANSI: 2
[ 8.102617] scsi target1:0:6: Beginning Domain Validation
[ 8.114374] scsi target1:0:6: Ending Domain Validation
[ 8.114482] scsi target1:0:6: asynchronous
[ 10.533561] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[ 10.533675] scsi 1:0:1:0: Attached scsi generic sg1 type 0
[ 10.533775] scsi 1:0:6:0: Attached scsi generic sg2 type 3
[ 10.551183] sd 1:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 10.551304] sd 1:0:1:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 10.552709] sd 1:0:0:0: [sda] Write Protect is off
[ 10.552753] sd 1:0:0:0: [sda] Mode Sense: ab 00 10 08
[ 10.552825] sd 1:0:1:0: [sdb] Write Protect is off
[ 10.552867] sd 1:0:1:0: [sdb] Mode Sense: ab 00 10 08
[ 10.554733] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.554876] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.579965] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 10.584606] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 10.587481] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 10.593108] sd 1:0:0:0: [sda] Attached SCSI disk
[ 11.215349] kjournald starting. Commit interval 5 seconds
[ 11.215470] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[ 12.411825] udevd[314]: starting version 175
[ 12.774964] iTCO_vendor_support: vendor-support=0
[ 12.877382] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 12.877535] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 14.553225] Adding 3906224k swap on /dev/sdb2. Priority:-1 extents:1 across:3906224k
[ 14.826368] EXT3-fs (sdb5): using internal journal
[ 14.941850] loop: module loaded
[ 15.869913] NET: Registered protocol family 10
[ 16.122368] RPC: Registered named UNIX socket transport module.
[ 16.122440] RPC: Registered udp transport module.
[ 16.122481] RPC: Registered tcp transport module.
[ 16.122522] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.182858] FS-Cache: Loaded
[ 16.292769] FS-Cache: Netfs 'nfs' registered for caching
[ 16.343027] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.349006] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 16.349927] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.351145] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.889049] Bluetooth: Core ver 2.16
[ 19.889128] NET: Registered protocol family 31
[ 19.889169] Bluetooth: HCI device and connection manager initialized
[ 19.889219] Bluetooth: HCI socket layer initialized
[ 19.889262] Bluetooth: L2CAP socket layer initialized
[ 19.889313] Bluetooth: SCO socket layer initialized
[ 19.936534] Bluetooth: RFCOMM TTY layer initialized
[ 19.936581] Bluetooth: RFCOMM socket layer initialized
[ 19.936623] Bluetooth: RFCOMM ver 1.11
[ 19.974205] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.974249] Bluetooth: BNEP filters: protocol multicast
[ 21.237274] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.236643] eth0: no IPv6 routers present
[ 28.968021] gnome-settings-(2756): floating-point assist fault at ip 200000000e610c22, isr 0000040000000008
[ 29.390806] gnome-settings-(2756): floating-point assist fault at ip 200000000e610c22, isr 0000040000000008
[ 42.179429] gnome-keyring-d(2913): unaligned access to 0x2000000004000bf4, ip=0x4000000000079111
[ 43.365374] gnome-settings-(2983): floating-point assist fault at ip 200000000fbbcc22, isr 0000040000000008
[ 46.887248] gnome-sound-app(3053): floating-point assist fault at ip 200000000310cbe1, isr 0000020000000008
[ 46.887318] gnome-sound-app(3053): floating-point assist fault at ip 200000000310cbe1, isr 0000020000000008
[ 51.616588] gnome-settings-(2983): floating-point assist fault at ip 20000000015cdf52, isr 0000040000000008
[ 51.616942] nm-applet(3055): floating-point assist fault at ip 2000000000a51f52, isr 0000040000000008
[ 83.641864] gnome-panel(3033): floating-point assist fault at ip 2000000002d38be1, isr 0000020000000008
[ 83.641915] gnome-panel(3033): floating-point assist fault at ip 2000000002d38be1, isr 0000020000000008
[ 83.954891] gnome-panel(3033): floating-point assist fault at ip 2000000002d38c22, isr 0000040000000008
[ 83.954937] gnome-panel(3033): floating-point assist fault at ip 2000000002d38c22, isr 0000040000000008
[ 84.057975] gnome-panel(3033): floating-point assist fault at ip 2000000002d38c22, isr 0000040000000008
 
Old 09-09-2012, 07:52 PM
Jonathan Nieder
 
Default Bug#679545: IA64 (Itanium) Wheezy, doesn't detect DVD drive and NIC, patch proposal

found 679545 linux/3.2.23-1
# hardware support
severity 679545 important
quit

Stephan Schreiber wrote:

> I just installed the unmodified Wheezy kernel
> (linux-image-3.2.0-3-mckinley_3.2.23.1_ia64.deb).
>
> The dmesg output is attached.

Thanks for the quick reply. I assume the DVD drive is not usable with
this kernel.

If you have dmesg output from the custom kernel that uses the ide/piix
driver, that will be useful as well for comparison.

Thanks for your patience,
Jonathan


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20120909195249.GC694@mannheim-rule.local
 
Old 09-09-2012, 08:11 PM
Stephan Schreiber
 
Default Bug#679545: IA64 (Itanium) Wheezy, doesn't detect DVD drive and NIC, patch proposal

Here is the dmesg output from a kernel that differs from the previous
one in the enabled piix driver.


Kind regards
Stephan Schreiber

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-mckinley (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Sat Aug 18 20:50:43 UTC 2012
[ 0.000000] EFI v1.10 by INTEL: SALsystab=0x7fe4c8c0 ACPI=0x7ff99000 ACPI 2.0=0x7ff98000 MPS=0x7ff97000 SMBIOS=0xf0000
[ 0.000000] booting generic kernel on platform dig
[ 0.000000] ACPI: RSDP 000000007ff98000 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000007ff98090 00034 (v01 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ACPI: FACP 000000007ff98138 000F4 (v03 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ACPI: DSDT 000000007ff9a000 02937 (v01 Intel SR870BH2 00000000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 000000007ff982e0 00040
[ 0.000000] ACPI: APIC 000000007ff98230 000AE (v01 INTEL SR870BH2 01072002 MSFT 00010013)
[ 0.000000] ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe0000001fdd2a000 (18855198 bytes)
[ 0.000000] SAL 3.1: Intel Corp SR870BH2 version 3.0
[ 0.000000] SAL Platform features: BusLock IRQ_Redirection
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xf0
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007ffffe400000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000400 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x00080000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000400 -> 0x0001fe80
[ 0.000000] 0: 0x0001ffa6 -> 0x0001ffd1
[ 0.000000] 0: 0x00060000 -> 0x0007ff84
[ 0.000000] 0: 0x0007ffa0 -> 0x0007ffed
[ 0.000000] On node 0 totalpages: 260732
[ 0.000000] free_area_init_node: node 0, pgdat e000000001900000, node_mem_map a0007ffffe40e000
[ 0.000000] DMA zone: 893 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 128814 pages, LIFO batch:7
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 130129 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s13824 r8192 d240128 u262144 alloc=16*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258943
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sdb5 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between e000000004cb4000 - e000000008cb4000
[ 0.000000] software IO TLB at phys 0x4cb4000 - 0x8cb4000
[ 0.000000] Memory: 4050880k/4140208k available (7801k code, 120832k reserved, 4455k data, 1200k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:1024
[ 0.000000] ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
[ 0.000000] register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
[ 0.000000] CPU 0: base freq=199.463MHz, ITC ratio=15/2, ITC freq=1495.975MHz
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.004000] Calibrating delay loop... 2232.32 BogoMIPS (lpj=4464640)
[ 0.032047] pid_max: default: 32768 minimum: 301
[ 0.032268] Security Framework initialized
[ 0.032319] AppArmor: AppArmor disabled by boot time parameter
[ 0.032557] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.037677] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.040338] Mount-cache hash table entries: 1024
[ 0.041019] Initializing cgroup subsys cpuacct
[ 0.041096] Initializing cgroup subsys memory
[ 0.041409] Initializing cgroup subsys devices
[ 0.041452] Initializing cgroup subsys freezer
[ 0.041494] Initializing cgroup subsys net_cls
[ 0.041537] Initializing cgroup subsys blkio
[ 0.041638] ACPI: Core revision 20110623
[ 0.044251] Boot processor id 0x0/0xc018
[ 0.000000] Fixed BSP b0 value from CPU 1
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff 5 cycles, maxerr 534 cycles)
[ 0.000000] CPU 1: base freq=199.463MHz, ITC ratio=15/2, ITC freq=1495.975MHz
[ 0.050918] Brought up 2 CPUs
[ 0.050960] Total of 2 processors activated (4464.64 BogoMIPS).
[ 0.051837] devtmpfs: initialized
[ 0.052498] DMI 2.3 present.
[ 0.052566] DMI: Intel MP Server /Main Board , BIOS S870BH2A.86B.0178.P06.0405281505 05/28/2004
[ 0.052923] print_constraints: dummy:
[ 0.053155] NET: Registered protocol family 16
[ 0.053358] ACPI: bus type pci registered
[ 0.054868] bio: create slab <bio-0> at 0
[ 0.055208] ACPI: Added _OSI(Module Device)
[ 0.055250] ACPI: Added _OSI(Processor Device)
[ 0.055291] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.055334] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056076] ACPI: EC: Look up EC in DSDT
[ 0.058902] ACPI: Interpreter enabled
[ 0.058941] ACPI: (supports S0 S5)
[ 0.059020] ACPI: Using IOSAPIC for interrupt routing
[ 0.062601] ACPI: No dock devices found.
[ 0.063381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
[ 0.064834] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000fffff]
[ 0.064898] pci_root PNP0A03:00: host bridge window [mem 0xfa000000-0xfbffffff]
[ 0.064962] pci_root PNP0A03:00: host bridge window [mem 0xff000000-0xffffffff]
[ 0.065026] pci_root PNP0A03:00: host bridge window [mem 0xfec00000-0xfec0ffff]
[ 0.065092] pci_root PNP0A03:00: host bridge window [io 0x0000-0xcfff]
[ 0.065236] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.065281] pci 0000:00:1d.0: reg 20: [io 0xbcc0-0xbcdf]
[ 0.065328] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.065368] pci 0000:00:1d.1: reg 20: [io 0xbce0-0xbcff]
[ 0.065408] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.065453] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[ 0.065527] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[ 0.065541] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.065552] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.065563] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.065574] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.065584] pci 0000:00:1f.1: reg 20: [io 0x1000-0x100f]
[ 0.065595] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.065653] pci 0000:01:01.0: [1002:4752] type 0 class 0x000300
[ 0.065670] pci 0000:01:01.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.065681] pci 0000:01:01.0: reg 14: [io 0xcc00-0xccff]
[ 0.065692] pci 0000:01:01.0: reg 18: [mem 0xfaff0000-0xfaff0fff]
[ 0.065724] pci 0000:01:01.0: reg 30: [mem 0xfafc0000-0xfafdffff pref]
[ 0.065733] pci 0000:01:01.0: Boot video device
[ 0.065755] pci 0000:01:01.0: supports D1 D2
[ 0.065793] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.065838] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.065845] pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfbffffff]
[ 0.065862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.065907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT]
[ 0.065923] ACPI Warning: For \_SB_.PCI0.H2PB._PRT: Return Package has no elements (empty) (20110623/nspredef-463)
[ 0.066043] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.066090] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.066155] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.067546] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 02-04])
[ 0.068927] pci_root PNP0A03:01: host bridge window [mem 0xf9000000-0xf9ffffff]
[ 0.068992] pci_root PNP0A03:01: host bridge window [mem 0xfec10000-0xfec2ffff]
[ 0.069057] pci_root PNP0A03:01: host bridge window [io 0xd000-0xefff]
[ 0.069191] pci 0000:02:1c.0: [8086:1461] type 0 class 0x000800
[ 0.069205] pci 0000:02:1c.0: reg 10: [mem 0xf9bf0000-0xf9bf0fff]
[ 0.069275] pci 0000:02:1d.0: [8086:1460] type 1 class 0x000604
[ 0.069331] pci 0000:02:1e.0: [8086:1461] type 0 class 0x000800
[ 0.069345] pci 0000:02:1e.0: reg 10: [mem 0xf9be0000-0xf9be0fff]
[ 0.069412] pci 0000:02:1f.0: [8086:1460] type 1 class 0x000604
[ 0.069489] pci 0000:03:01.0: [1000:0030] type 0 class 0x000100
[ 0.069509] pci 0000:03:01.0: reg 10: [io 0xd800-0xd8ff]
[ 0.069523] pci 0000:03:01.0: reg 14: [mem 0xf9ed0000-0xf9edffff 64bit]
[ 0.069538] pci 0000:03:01.0: reg 1c: [mem 0xf9ec0000-0xf9ecffff 64bit]
[ 0.069555] pci 0000:03:01.0: reg 30: [mem 0xf9c00000-0xf9cfffff pref]
[ 0.069592] pci 0000:03:01.0: supports D1 D2
[ 0.069623] pci 0000:03:01.1: [1000:0030] type 0 class 0x000100
[ 0.069643] pci 0000:03:01.1: reg 10: [io 0xdc00-0xdcff]
[ 0.069657] pci 0000:03:01.1: reg 14: [mem 0xf9ef0000-0xf9efffff 64bit]
[ 0.069671] pci 0000:03:01.1: reg 1c: [mem 0xf9ee0000-0xf9eeffff 64bit]
[ 0.069689] pci 0000:03:01.1: reg 30: [mem 0xf9d00000-0xf9dfffff pref]
[ 0.069725] pci 0000:03:01.1: supports D1 D2
[ 0.069770] pci 0000:02:1d.0: PCI bridge to [bus 03-03]
[ 0.069815] pci 0000:02:1d.0: bridge window [io 0xd000-0xdfff]
[ 0.069821] pci 0000:02:1d.0: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.069862] pci 0000:04:01.0: [8086:1010] type 0 class 0x000200
[ 0.069883] pci 0000:04:01.0: reg 10: [mem 0xf9fc0000-0xf9fdffff 64bit]
[ 0.069907] pci 0000:04:01.0: reg 20: [io 0xec80-0xecbf]
[ 0.069956] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.069963] pci 0000:04:01.0: PME# disabled
[ 0.069989] pci 0000:04:01.1: [8086:1010] type 0 class 0x000200
[ 0.070010] pci 0000:04:01.1: reg 10: [mem 0xf9fe0000-0xf9ffffff 64bit]
[ 0.070034] pci 0000:04:01.1: reg 20: [io 0xecc0-0xecff]
[ 0.070083] pci 0000:04:01.1: PME# supported from D0 D3hot D3cold
[ 0.070089] pci 0000:04:01.1: PME# disabled
[ 0.070134] pci 0000:02:1f.0: PCI bridge to [bus 04-04]
[ 0.070179] pci 0000:02:1f.0: bridge window [io 0xe000-0xefff]
[ 0.070185] pci 0000:02:1f.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.070209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT]
[ 0.070245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT]
[ 0.070271] pci0000:02: Requesting ACPI _OSC control (0x1d)
[ 0.070316] pci0000:02: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.070382] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.071637] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 05-07])
[ 0.072970] pci_root PNP0A03:02: host bridge window [mem 0xf8000000-0xf8ffffff]
[ 0.073034] pci_root PNP0A03:02: host bridge window [mem 0xfec30000-0xfec4ffff]
[ 0.073187] pci 0000:05:1c.0: [8086:1461] type 0 class 0x000800
[ 0.073201] pci 0000:05:1c.0: reg 10: [mem 0xf8ff0000-0xf8ff0fff]
[ 0.073271] pci 0000:05:1d.0: [8086:1460] type 1 class 0x000604
[ 0.073327] pci 0000:05:1e.0: [8086:1461] type 0 class 0x000800
[ 0.073341] pci 0000:05:1e.0: reg 10: [mem 0xf8fe0000-0xf8fe0fff]
[ 0.073409] pci 0000:05:1f.0: [8086:1460] type 1 class 0x000604
[ 0.073501] pci 0000:05:1d.0: PCI bridge to [bus 06-06]
[ 0.073596] pci 0000:05:1f.0: PCI bridge to [bus 07-07]
[ 0.073660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PA._PRT]
[ 0.073699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PB._PRT]
[ 0.073745] pci0000:05: Requesting ACPI _OSC control (0x1d)
[ 0.073791] pci0000:05: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.073856] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.077567] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.077567] vgaarb: loaded
[ 0.077567] vgaarb: bridge control possible 0000:01:01.0
[ 0.077567] Switching to clocksource itc
[ 0.077568] pnp: PnP ACPI init
[ 0.077568] ACPI: bus type pnp registered
[ 0.077568] pnp 00:00: [bus 00-01]
[ 0.077568] pnp 00:00: [mem 0x000a0000-0x000fffff window]
[ 0.077568] pnp 00:00: [mem 0xfa000000-0xfbffffff window]
[ 0.077568] pnp 00:00: [mem 0xff000000-0xffffffff window]
[ 0.077568] pnp 00:00: [mem 0xfec00000-0xfec0ffff window]
[ 0.077568] pnp 00:00: [io 0x0000-0xcfff window]
[ 0.077568] pnp 00:00: [io 0xffff-0x0000 window]
[ 0.077568] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.077568] pnp 00:01: [io 0x0010-0x001f]
[ 0.077568] pnp 00:01: [io 0x0022-0x002d]
[ 0.077568] pnp 00:01: [io 0x0030-0x003f]
[ 0.077568] pnp 00:01: [io 0x0044-0x005f]
[ 0.077568] pnp 00:01: [io 0x0062-0x0063]
[ 0.077568] pnp 00:01: [io 0x0065-0x006f]
[ 0.077568] pnp 00:01: [io 0x0072-0x007f]
[ 0.077568] pnp 00:01: [io 0x0080]
[ 0.077568] pnp 00:01: [io 0x0084-0x0086]
[ 0.077568] pnp 00:01: [io 0x0088]
[ 0.077568] pnp 00:01: [io 0x008c-0x008e]
[ 0.077568] pnp 00:01: [io 0x0090-0x009f]
[ 0.077568] pnp 00:01: [io 0x00a2-0x00bd]
[ 0.077568] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.077568] pnp 00:01: [io 0x08a0-0x08a3]
[ 0.077568] pnp 00:01: [io 0x0cc0-0x0ccf]
[ 0.077568] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.077568] pnp 00:01: [io 0x0c00-0x0c07]
[ 0.077568] pnp 00:01: [io 0x0000-0xffffffffffffffff disabled]
[ 0.077568] pnp 00:01: [mem 0xfec00000-0xfec0ffff]
[ 0.077568] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.077568] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.077568] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.077568] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.077568] system 00:01: [io 0x0c00-0x0c07] has been reserved
[ 0.077568] system 00:01: [mem 0xfec00000-0xfec0ffff] has been reserved
[ 0.077589] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.077637] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077658] pnp 00:02: [dma 4]
[ 0.077662] pnp 00:02: [io 0x0000-0x000f]
[ 0.077666] pnp 00:02: [io 0x0081-0x0083]
[ 0.077670] pnp 00:02: [io 0x0087]
[ 0.077674] pnp 00:02: [io 0x0089-0x008b]
[ 0.077677] pnp 00:02: [io 0x008f]
[ 0.077681] pnp 00:02: [io 0x00c0-0x00df]
[ 0.077723] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.077742] pnp 00:03: [io 0x0070-0x0071]
[ 0.077746] pnp 00:03: [irq 40]
[ 0.077783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077799] pnp 00:04: [io 0x0061]
[ 0.077837] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.077884] pnp 00:05: [mem 0xffc00000-0xffffffff]
[ 0.077888] pnp 00:05: [mem 0xff400000-0xff5fffff]
[ 0.077893] pnp 00:05: [mem 0xff000000-0xff1fffff]
[ 0.077931] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.077999] pnp 00:06: [io 0x002e-0x002f]
[ 0.078058] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.078496] pnp 00:07: [irq 42]
[ 0.078499] pnp 00:07: [dma 2]
[ 0.078503] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.078507] pnp 00:07: [io 0x03f7]
[ 0.078616] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.079024] pnp 00:08: [irq 44]
[ 0.079028] pnp 00:08: [dma 0 disabled]
[ 0.079032] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.079036] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.079144] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.079549] pnp 00:09: [irq 45]
[ 0.079553] pnp 00:09: [dma 0 disabled]
[ 0.079557] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.079562] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.079669] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.080375] pnp 00:0a: [bus 02-04]
[ 0.080380] pnp 00:0a: [mem 0xffffffff-0x00000000 window]
[ 0.080385] pnp 00:0a: [mem 0xf9000000-0xf9ffffff window]
[ 0.080389] pnp 00:0a: [mem 0xffffffff-0x00000000 window]
[ 0.080394] pnp 00:0a: [mem 0xfec10000-0xfec2ffff window]
[ 0.080398] pnp 00:0a: [io 0xd000-0xefff window]
[ 0.080403] pnp 00:0a: [io 0xffff-0x0000 window]
[ 0.080446] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.081128] pnp 00:0b: [bus 05-07]
[ 0.081133] pnp 00:0b: [mem 0xffffffff-0x00000000 window]
[ 0.081138] pnp 00:0b: [mem 0xf8000000-0xf8ffffff window]
[ 0.081142] pnp 00:0b: [mem 0xffffffff-0x00000000 window]
[ 0.081147] pnp 00:0b: [mem 0xfec30000-0xfec4ffff window]
[ 0.081152] pnp 00:0b: [io 0xffff-0x0000 window]
[ 0.081156] pnp 00:0b: [io 0xffff-0x0000 window]
[ 0.081201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.081283] pnp: PnP ACPI: found 12 devices
[ 0.081324] ACPI: ACPI bus type pnp unregistered
[ 0.086323] NET: Registered protocol family 2
[ 0.086593] IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.087988] TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
[ 0.097456] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 0.098753] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.098801] TCP reno registered
[ 0.098848] UDP hash table entries: 2048 (order: 2, 65536 bytes)
[ 0.099026] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
[ 0.099553] NET: Registered protocol family 1
[ 0.099710] GSI 16 (level, low) -> CPU 0 (0xc018) vector 49
[ 0.099759] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 49
[ 0.099822] pci 0000:00:1d.0: PCI INT A disabled
[ 0.099866] GSI 16 (level, low) -> CPU 0 (0xc018) vector 49 unregistered
[ 0.099931] GSI 19 (level, low) -> CPU 1 (0xc618) vector 49
[ 0.099976] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 50
[ 0.100035] pci 0000:00:1d.1: PCI INT B disabled
[ 0.100078] GSI 19 (level, low) -> CPU 1 (0xc618) vector 49 unregistered
[ 0.100185] PCI: CLS 128 bytes, default 128
[ 0.100321] Unpacking initramfs...
[ 0.763201] Freeing initrd memory: 18400kB freed
[ 0.763780] perfmon: version 2.0 IRQ 238
[ 0.763831] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[ 0.764594] perfmon: added sampling format default_format
[ 0.764640] perfmon_default_smpl: default_format v2.0 registered
[ 1.175709] audit: initializing netlink socket (disabled)
[ 1.175772] type=2000 audit(1347227936.172:1): initialized
[ 1.211895] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 1.212469] VFS: Disk quotas dquot_6.5.2
[ 1.213705] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.214000] msgmni has been set to 7947
[ 1.214420] alg: No test for stdrng (krng)
[ 1.214520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.214586] io scheduler noop registered
[ 1.214626] io scheduler deadline registered
[ 1.214715] io scheduler cfq registered (default)
[ 1.215039] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.215131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.215179] sn_pci_hotplug_init: PROM version does not support hotplug.
[ 1.215437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.215507] ACPI: Power Button [PWRF]
[ 1.215613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.238093] 00:08: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
[ 1.258671] 00:09: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
[ 1.258930] Linux agpgart interface v0.103
[ 1.259606] mousedev: PS/2 mouse device common for all mice
[ 1.259894] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 1.260368] TCP cubic registered
[ 1.260409] NET: Registered protocol family 17
[ 1.260460] Registering the dns_resolver key type
[ 1.260666] registered taskstats version 1
[ 1.261108] rtc-efi rtc-efi: setting system clock to 2012-09-09 21:58:56 UTC (1347227936)
[ 1.261277] Freeing unused kernel memory: 1200kB freed
[ 1.277541] udevd[47]: starting version 175
[ 1.329152] Uniform Multi-Platform E-IDE driver
[ 1.333276] usbcore: registered new interface driver usbfs
[ 1.333377] usbcore: registered new interface driver hub
[ 1.333869] piix 0000:00:1f.1: IDE controller (0x8086:0x24cb rev 0x02)
[ 1.333935] PIIX_IDE 0000:00:1f.1: device not available (can't reserve [mem 0x00000000-0x000003ff])
[ 1.334012] PIIX_IDE 0000:00:1f.1: can't derive routing for PCI INT A
[ 1.334059] piix 0000:00:1f.1: BIOS configuration fixed
[ 1.334134] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.334188] ide0: BM-DMA at 0x1000-0x1007
[ 1.334242] ide1: BM-DMA at 0x1008-0x100f
[ 1.334289] Probing IDE interface ide0...
[ 1.357177] usbcore: registered new device driver usb
[ 1.358326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.358933] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.363868] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.363918] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.364076] GSI 24 (level, low) -> CPU 0 (0xc018) vector 49
[ 1.364122] e1000 0000:04:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 51
[ 1.375640] SCSI subsystem initialized
[ 1.380857] Fusion MPT base driver 3.04.20
[ 1.380898] Copyright (c) 1999-2008 LSI Corporation
[ 1.382839] Fusion MPT SPI Host driver 3.04.20
[ 1.382957] GSI 48 (level, low) -> CPU 1 (0xc618) vector 50
[ 1.383004] mptspi 0000:03:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 52
[ 1.383148] mptbase: ioc0: Initiating bringup
[ 1.670454] e1000 0000:04:01.0: eth0: (PCI-X:133MHz:64-bit) 00:07:e9:23:d5:e8
[ 1.670511] e1000 0000:04:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.670599] GSI 25 (level, low) -> CPU 0 (0xc018) vector 51
[ 1.670645] e1000 0000:04:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 53
[ 1.861437] ioc0: LSI53C1030 C0: Capabilities={Initiator}
[ 1.978403] e1000 0000:04:01.1: eth1: (PCI-X:133MHz:64-bit) 00:07:e9:23:d5:e9
[ 1.978455] e1000 0000:04:01.1: eth1: Intel(R) PRO/1000 Network Connection
[ 2.069599] hda: HL-DT-ST DVDRAM GSA-T40N, ATAPI CD/DVD-ROM drive
[ 2.405516] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.406330] hda: UDMA/33 mode selected
[ 2.406774] Probing IDE interface ide1...
[ 2.694803] scsi0 : ioc0: LSI53C1030 C0, FwRev=01030a00h, Ports=1, MaxQ=222, IRQ=52
[ 2.973494] ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
[ 2.973672] ide1 at 0x170-0x177,0x376 on irq 33
[ 2.984653] GSI 16 (level, low) -> CPU 1 (0xc618) vector 52
[ 2.984699] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 49
[ 2.984756] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.984857] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.984971] uhci_hcd 0000:00:1d.0: irq 49, io base 0x0000bcc0
[ 2.985096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.985144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.985207] usb usb1: Product: UHCI Host Controller
[ 2.985249] usb usb1: Manufacturer: Linux 3.2.0-3-mckinley uhci_hcd
[ 2.985295] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.985771] hub 1-0:1.0: USB hub found
[ 2.985815] hub 1-0:1.0: 2 ports detected
[ 2.985933] GSI 19 (level, low) -> CPU 0 (0xc018) vector 53
[ 2.985978] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 50
[ 2.986029] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.986081] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.986170] uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bce0
[ 2.986271] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.986319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.986382] usb usb2: Product: UHCI Host Controller
[ 2.986424] usb usb2: Manufacturer: Linux 3.2.0-3-mckinley uhci_hcd
[ 2.986469] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.987389] hub 2-0:1.0: USB hub found
[ 2.987432] hub 2-0:1.0: 2 ports detected
[ 2.992372] libata version 3.00 loaded.
[ 2.996925] ide-cd driver 5.00
[ 2.999126] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 2.999276] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.067438] GSI 49 (level, low) -> CPU 1 (0xc618) vector 54
[ 3.067484] mptspi 0000:03:01.1: PCI INT B -> GSI 49 (level, low) -> IRQ 54
[ 3.067623] mptbase: ioc1: Initiating bringup
[ 3.297443] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 3.484997] usb 1-1: New USB device found, idVendor=046a, idProduct=0011
[ 3.485045] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.532223] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
[ 3.532391] generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1/input0
[ 3.532652] usbcore: registered new interface driver usbhid
[ 3.532696] usbhid: USB HID core driver
[ 3.600633] usb 1-2: new low-speed USB device number 3 using uhci_hcd
[ 3.776945] usb 1-2: New USB device found, idVendor=046d, idProduct=c050
[ 3.776992] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.777040] usb 1-2: Product: USB-PS/2 Optical Mouse
[ 3.777082] usb 1-2: Manufacturer: Logitech
[ 3.794067] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2
[ 3.794296] generic-usb 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 4.600627] ioc1: LSI53C1030 C0: Capabilities={Initiator}
[ 5.433980] scsi1 : ioc1: LSI53C1030 C0, FwRev=01030a00h, Ports=1, MaxQ=222, IRQ=54
[ 5.847256] scsi: waiting for bus probes to complete ...
[ 6.893347] scsi 1:0:0:0: Direct-Access SEAGATE ST3300007LC D704 PQ: 0 ANSI: 3
[ 6.893425] scsi target1:0:0: Beginning Domain Validation
[ 6.907043] scsi target1:0:0: Ending Domain Validation
[ 6.907155] scsi target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 6.922721] scsi 1:0:1:0: Direct-Access SEAGATE ST3300007LC D704 PQ: 0 ANSI: 3
[ 6.922791] scsi target1:0:1: Beginning Domain Validation
[ 6.936498] scsi target1:0:1: Ending Domain Validation
[ 6.936609] scsi target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 7.958535] scsi 1:0:6:0: Processor ESG-SHV SCA HSBP M24 1.0D PQ: 0 ANSI: 2
[ 7.958606] scsi target1:0:6: Beginning Domain Validation
[ 7.970363] scsi target1:0:6: Ending Domain Validation
[ 7.970470] scsi target1:0:6: asynchronous
[ 10.389061] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 10.389344] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 10.389467] scsi 1:0:6:0: Attached scsi generic sg2 type 3
[ 10.392569] sd 1:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 10.392699] sd 1:0:1:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 10.394103] sd 1:0:0:0: [sda] Write Protect is off
[ 10.394146] sd 1:0:0:0: [sda] Mode Sense: ab 00 10 08
[ 10.394218] sd 1:0:1:0: [sdb] Write Protect is off
[ 10.394261] sd 1:0:1:0: [sdb] Mode Sense: ab 00 10 08
[ 10.396124] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.396340] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.427167] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 10.428624] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 10.432465] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 10.433364] sd 1:0:0:0: [sda] Attached SCSI disk
[ 11.068552] kjournald starting. Commit interval 5 seconds
[ 11.068643] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[ 12.273591] udevd[311]: starting version 175
[ 12.711242] iTCO_vendor_support: vendor-support=0
[ 12.717146] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 12.717308] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 14.418324] Adding 3906224k swap on /dev/sdb2. Priority:-1 extents:1 across:3906224k
[ 14.703462] EXT3-fs (sdb5): using internal journal
[ 14.822565] loop: module loaded
[ 15.752339] NET: Registered protocol family 10
[ 16.009743] RPC: Registered named UNIX socket transport module.
[ 16.009812] RPC: Registered udp transport module.
[ 16.009853] RPC: Registered tcp transport module.
[ 16.009895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.048504] FS-Cache: Loaded
[ 16.153653] FS-Cache: Netfs 'nfs' registered for caching
[ 16.208215] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.308991] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 16.310640] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.311858] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.351236] Bluetooth: Core ver 2.16
[ 19.351313] NET: Registered protocol family 31
[ 19.351354] Bluetooth: HCI device and connection manager initialized
[ 19.351403] Bluetooth: HCI socket layer initialized
[ 19.351446] Bluetooth: L2CAP socket layer initialized
[ 19.351696] Bluetooth: SCO socket layer initialized
[ 19.420037] Bluetooth: RFCOMM TTY layer initialized
[ 19.420083] Bluetooth: RFCOMM socket layer initialized
[ 19.420125] Bluetooth: RFCOMM ver 1.11
[ 19.458170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.458221] Bluetooth: BNEP filters: protocol multicast
[ 20.718747] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.020629] eth0: no IPv6 routers present
[ 28.821619] gnome-settings-(2761): floating-point assist fault at ip 200000000e610be1, isr 0000020000000008
[ 28.821641] gnome-settings-(2761): floating-point assist fault at ip 200000000e610c22, isr 0000040000000008
[ 29.065793] gdm-simple-gree(2904): floating-point assist fault at ip 2000000002ca4c22, isr 0000040000000008
[ 29.065860] gdm-simple-gree(2904): floating-point assist fault at ip 2000000002ca4c22, isr 0000040000000008
[ 31.208637] gdm-simple-gree(2904): floating-point assist fault at ip 2000000002ca4be1, isr 0000020000000008
[ 38.945479] gnome-keyring-d(2923): unaligned access to 0x60000000000549f4, ip=0x4000000000079111
[ 40.235062] gnome-settings-(2992): floating-point assist fault at ip 200000000fb98c22, isr 0000040000000008
[ 40.235127] gnome-settings-(2992): floating-point assist fault at ip 200000000fb98c22, isr 0000040000000008
[ 43.858331] bluetooth-apple(3075): floating-point assist fault at ip 2000000002788c22, isr 0000040000000008
[ 43.858423] bluetooth-apple(3075): floating-point assist fault at ip 2000000002788c22, isr 0000040000000008
[ 47.711888] gnome-settings-(2992): floating-point assist fault at ip 20000000015cdf52, isr 0000040000000008
[ 53.114959] gnome-panel(3041): floating-point assist fault at ip 2000000002d38be1, isr 0000020000000008
[ 53.115003] gnome-panel(3041): floating-point assist fault at ip 2000000002d38be1, isr 0000020000000008
 

Thread Tools




All times are GMT. The time now is 02:41 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org