Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h (http://www.linux-archive.org/debian-kernel/697642-bug-685864-linux-image-3-2-0-3-amd64-commande-halt-halt-p-shutdown-reboot-system-cm-gigabyte-z77x-ud5h.html)

novice 08-25-2012 03:25 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
Package: src:linux
Version: 3.2.23-1
Severity: important


Use root :
command:

halt
halt -p
shutdown (all paramettre tested)

result:
reboot,

source.list

deb http://debian.ethz.ch/debian testing main contrib non-free
deb-src http://debian.ethz.ch/debian testing main contrib non-free

deb http://debian.ethz.ch/debian/ wheezy-updates main contrib non-free
deb-src http://debian.ethz.ch/debian/ wheezy-updates main contrib non-free

deb http://security.debian.org/ wheezy/updates main contrib non-free
deb-src http://security.debian.org/ wheezy/updates main contrib non-free




# lsmod
Module Size Used by
iptable_nat 12928 0
nf_nat 18242 1 iptable_nat
xt_owner 12423 0
iptable_mangle 12536 0
xt_limit 12638 0
xt_length 12460 0
nf_conntrack_ipv4 14078 3 nf_nat,iptable_nat
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
xt_state 12503 0
nf_conntrack 52720 4 xt_state,nf_conntrack_ipv4,nf_nat,iptable_nat
xt_multiport 12548 0
xt_iprange 12504 0
xt_comment 12427 0
ip6table_filter 12540 0
ip6_tables 22175 1 ip6table_filter
iptable_filter 12536 0
ip_tables 22042 3 iptable_filter,iptable_mangle,iptable_nat
ipt_ULOG 16833 1
x_tables 19073 14
ipt_ULOG,ip_tables,iptable_filter,ip6_tables,ip6ta ble_filter,xt_comment,xt_iprange,xt_multiport,xt_s tate,xt_length,xt_limit,iptable_mangle,xt_owner,ip table_nat
parport_pc 22364 0
ppdev 12763 0
lp 17149 0
parport 31858 3 lp,ppdev,parport_pc
nfsd 211858 2
nfs 312243 0
nfs_acl 12511 2 nfs,nfsd
auth_rpcgss 37143 2 nfs,nfsd
fscache 36739 1 nfs
lockd 67328 2 nfs,nfsd
sunrpc 173671 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
loop 22641 0
firewire_sbp2 17993 0
snd_usb_audio 84836 2
snd_usbmidi_lib 23420 1 snd_usb_audio
snd_seq_midi 12848 0
snd_seq_midi_event 13316 1 snd_seq_midi
snd_rawmidi 23060 2 snd_seq_midi,snd_usbmidi_lib
uinput 17440 2
snd_hda_codec_hdmi 30783 5
snd_hda_codec_realtek 188797 1
joydev 17266 0
usbhid 36379 0
hid 81288 1 usbhid
nvidia 10823460 41
coretemp 12898 0
crc32c_intel 12747 0
ghash_clmulni_intel 13133 0
snd_hda_intel 26345 3
snd_hda_codec 78031 3
snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_ hdmi
mxm_wmi 12473 0
snd_hwdep 13186 2 snd_hda_codec,snd_usb_audio
evdev 17562 24
snd_pcm 63900 4
snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd _usb_audio
aesni_intel 50667 0
snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
snd_seq 45093 2 snd_seq_midi_event,snd_seq_midi
aes_x86_64 16796 1 aesni_intel
snd_seq_device 13176 3 snd_seq,snd_rawmidi,snd_seq_midi
aes_generic 33026 2 aes_x86_64,aesni_intel
snd_timer 22917 2 snd_seq,snd_pcm
cryptd 14517 2 aesni_intel,ghash_clmulni_intel
i2c_i801 16870 0
psmouse 64455 0
iTCO_wdt 17081 0
serio_raw 12931 0
pcspkr 12579 0
snd 52850 22
snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep ,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek ,snd_hda_codec_hdmi,snd_rawmidi,snd_usbmidi_lib,sn d_usb_audio
i2c_core 23876 2 i2c_i801,nvidia
iTCO_vendor_support 12704 1 iTCO_wdt
soundcore 13065 1 snd
acpi_cpufreq 12935 0
mperf 12453 1 acpi_cpufreq
wmi 13243 1 mxm_wmi
video 17628 0
processor 28157 1 acpi_cpufreq
button 12937 0
ext4 350411 3
crc16 12343 1 ext4
jbd2 62015 1 ext4
mbcache 13065 1 ext4
sr_mod 21899 0
cdrom 35401 1 sr_mod
sd_mod 36136 5
crc_t10dif 12348 1 sd_mod
ahci 24997 4
firewire_ohci 35772 0
libahci 22860 1 ahci
firewire_core 48407 2 firewire_ohci,firewire_sbp2
crc_itu_t 12347 1 firewire_core
libata 140589 2 libahci,ahci
scsi_mod 162372 4 libata,sd_mod,sr_mod,firewire_sbp2
atl1c 32217 0
ehci_hcd 40215 0
e1000e 120822 0
xhci_hcd 73170 0
thermal 17383 0
fan 12674 0
thermal_sys 18040 4 fan,thermal,processor,video
usbcore 128498 7
xhci_hcd,ehci_hcd,usbhid,snd_usbmidi_lib,snd_usb_a udio
usb_common 12354 1 usbcore



-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=79c5c74d-1b80-4fb0-93d4-840c563af818 ro quiet

** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 3.984689] usb 3-1.2.1.4: Product: USB2.0 Hub
[ 3.985192] hub 3-1.2.1.4:1.0: USB hub found
[ 3.985514] hub 3-1.2.1.4:1.0: 4 ports detected
[ 4.009291] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.2/3-1.2.1.2:1.0/input/input3
[ 4.009408] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1a.0-1.2.1.2/input0
[ 4.013319] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.2/3-1.2.1.2:1.1/input/input4
[ 4.013581] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1a.0-1.2.1.2/input1
[ 4.013590] usbcore: registered new interface driver usbhid
[ 4.013591] usbhid: USB HID core driver
[ 4.058464] usb 3-1.2.1.1.1: new low-speed USB device number 10 using ehci_hcd
[ 4.156361] usb 3-1.2.1.1.1: New USB device found, idVendor=046d, idProduct=c226
[ 4.156366] usb 3-1.2.1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.156368] usb 3-1.2.1.1.1: Product: G15 Gaming Keyboard
[ 4.160190] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.1/3-1.2.1.1.1:1.0/input/input5
[ 4.160318] generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1.1.1/input0
[ 4.166395] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.1/3-1.2.1.1.1:1.1/input/input6
[ 4.166578] generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1.1.1/input1
[ 4.214669] hda_codec: ALC898: BIOS auto-probing.
[ 4.225827] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 4.226010] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 4.226205] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.226324] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.226679] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.226883] snd_hda_intel 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.226886] hda_intel: Disabling MSI
[ 4.226981] snd_hda_intel 0000:07:00.1: setting latency timer to 64
[ 4.238304] usb 3-1.2.1.1.4: new full-speed USB device number 11 using ehci_hcd
[ 4.333617] usb 3-1.2.1.1.4: New USB device found, idVendor=046d, idProduct=c227
[ 4.333622] usb 3-1.2.1.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.333624] usb 3-1.2.1.1.4: Product: G15 GamePanel LCD
[ 4.352622] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.4/3-1.2.1.1.4:1.0/input/input10
[ 4.352947] generic-usb 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.0-1.2.1.1.4/input0
[ 4.426114] usb 3-1.2.1.4.3: new full-speed USB device number 12 using ehci_hcd
[ 4.520933] usb 3-1.2.1.4.3: New USB device found, idVendor=03f0, idProduct=6104
[ 4.520938] usb 3-1.2.1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.520941] usb 3-1.2.1.4.3: Product: deskjet 5600
[ 4.520943] usb 3-1.2.1.4.3: Manufacturer: hp
[ 4.520945] usb 3-1.2.1.4.3: SerialNumber: MY36M2K30R89
[ 4.594040] usb 3-1.2.1.4.4: new full-speed USB device number 13 using ehci_hcd
[ 4.692157] usb 3-1.2.1.4.4: New USB device found, idVendor=046d, idProduct=0a0b
[ 4.692162] usb 3-1.2.1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.692165] usb 3-1.2.1.4.4: Product: Logitech USB Headset
[ 4.692167] usb 3-1.2.1.4.4: Manufacturer: Logitech
[ 4.694943] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.4/3-1.2.1.4.4/3-1.2.1.4.4:1.3/input/input11
[ 4.695206] generic-usb 0003:046D:0A0B.0006: input,hidraw5: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.0-1.2.1.4.4/input3
[ 4.717544] usbcore: registered new interface driver snd-usb-audio
[ 5.033241] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.065212] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.097160] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.129147] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.145205] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input12
[ 5.145421] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input13
[ 5.145610] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input14
[ 5.145792] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input15
[ 8.281785] input: G15 Extra Keys as /devices/virtual/input/input16
[ 8.522280] Adding 932860k swap on /dev/sda7. Priority:-1 extents:1 across:932860k SS
[ 8.538573] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.585238] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.606610] loop: module loaded
[ 9.614132] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.622244] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.899033] RPC: Registered named UNIX socket transport module.
[ 9.899037] RPC: Registered udp transport module.
[ 9.899039] RPC: Registered tcp transport module.
[ 9.899041] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.904735] FS-Cache: Loaded
[ 9.913149] FS-Cache: Netfs 'nfs' registered for caching
[ 9.918804] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.325750] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 10.618105] e1000e 0000:00:19.0: PME# enabled
[ 11.119183] lp: driver loaded but no devices found
[ 11.122348] ppdev: user-space parallel port driver
[ 14.336170] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf6500000-0xf651ffff] (PCI address [0xf6500000-0xf651ffff])
[ 14.336179] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf6536000-0xf6536fff] (PCI address [0xf6536000-0xf6536fff])
[ 14.336185] e1000e 0000:00:19.0: BAR 2: set to [io 0xf000-0xf01f] (PCI address [0xf000-0xf01f])
[ 14.336201] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 14.336221] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 14.336266] e1000e 0000:00:19.0: PME# disabled
[ 14.387058] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.480199] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.535998] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.536619] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.539136] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.548298] atl1c 0000:05:00.0: irq 48 for MSI/MSI-X
[ 14.567981] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.632926] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.789067] e1000e 0000:00:19.0: PCI INT A disabled
[ 15.789080] e1000e 0000:00:19.0: PME# enabled
[ 17.437107] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf6500000-0xf651ffff] (PCI address [0xf6500000-0xf651ffff])
[ 17.437115] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf6536000-0xf6536fff] (PCI address [0xf6536000-0xf6536fff])
[ 17.437121] e1000e 0000:00:19.0: BAR 2: set to [io 0xf000-0xf01f] (PCI address [0xf000-0xf01f])
[ 17.437137] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 17.437159] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 17.437188] e1000e 0000:00:19.0: PME# disabled
[ 17.437259] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 21.111178] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 21.111625] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 31.998890] eth1: no IPv6 routers present
[ 459.452059] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 470.347806] eth1: no IPv6 routers present

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F4
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z77X-UD5H
board_version: x.x

** Loaded modules:
iptable_nat
nf_nat
xt_owner
iptable_mangle
xt_limit
xt_length
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
xt_multiport
xt_iprange
xt_comment
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ipt_ULOG
x_tables
parport_pc
ppdev
lp
parport
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
firewire_sbp2
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
uinput
snd_hda_codec_hdmi
snd_hda_codec_realtek
joydev
usbhid
hid
nvidia(P)
coretemp
crc32c_intel
ghash_clmulni_intel
snd_hda_intel
snd_hda_codec
mxm_wmi
snd_hwdep
evdev
snd_pcm
aesni_intel
snd_page_alloc
snd_seq
aes_x86_64
snd_seq_device
aes_generic
snd_timer
cryptd
i2c_i801
psmouse
iTCO_wdt
serio_raw
pcspkr
snd
i2c_core
iTCO_vendor_support
soundcore
acpi_cpufreq
mperf
wmi
video
processor
button
ext4
crc16
jbd2
mbcache
sr_mod
cdrom
sd_mod
crc_t10dif
ahci
firewire_ohci
libahci
firewire_core
crc_itu_t
libata
scsi_mod
atl1c
ehci_hcd
e1000e
xhci_hcd
thermal
fan
thermal_sys
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f60fffff
Prefetchable memory behind bridge: 00000000e8000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f6520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Giga-byte Technology Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f6535000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f6500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6536000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6537000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Giga-byte Technology Device [1458:a072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6400000-f64fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6300000-f63fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6200000-f62fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f6100000-f61fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6538000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f040 [size=32]
Region 5: Memory at f653b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f653a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f020 [size=32]

02:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at e040 [size=8]
Region 1: I/O ports at e030 [size=4]
Region 2: I/O ports at e020 [size=8]
Region 3: I/O ports at e010 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at f6410000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f6400000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci

03:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 30) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6300000-f63fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

04:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-7VT600-1394 Motherboard [1458:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f6300000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at c000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c

06:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at b040 [size=8]
Region 1: I/O ports at b030 [size=4]
Region 2: I/O ports at b020 [size=8]
Region 3: I/O ports at b010 [size=4]
Region 4: I/O ports at b000 [size=16]
Region 5: Memory at f6110000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f6100000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci

07:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF104 [GeForce GTX 460] [10de:0e22] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:34fc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia

07:00.1 Audio device [0403]: NVIDIA Corporation GF104 High Definition Audio Controller [10de:0beb] (rev a1)
Subsystem: Giga-byte Technology Device [1458:34fc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 2109:0810
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 2109:0810
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 004: ID 2109:0810
Bus 003 Device 005: ID 2109:0810
Bus 003 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 007: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub
Bus 003 Device 008: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 003 Device 009: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 003 Device 010: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard
Bus 003 Device 011: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard
Bus 003 Device 012: ID 03f0:6104 Hewlett-Packard DeskJet 5650c
Bus 003 Device 013: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2

Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1

Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20120825152527.15186.28520.reportbug@debian

Geert Stappers 08-25-2012 05:12 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
On Sat, Aug 25, 2012 at 05:25:27PM +0200, novice wrote:
>
> halt
> halt -p
> shutdown (all paramettre tested)
>
> result:
> reboot,
>

My first impression is that ACPI ( http://en.wikipedia.org/wiki/Acpi )
is not working ...

>
> # lsmod
> Module Size Used by
> iptable_nat 12928 0
Used by zero other modules

> nf_nat 18242 1 iptable_nat
Used by 1 other module, it's name is listed

> xt_owner 12423 0
> iptable_mangle 12536 0
> xt_limit 12638 0
> xt_length 12460 0
> nf_conntrack_ipv4 14078 3 nf_nat,iptable_nat
3 and all three are named/enumerated

> nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
> xt_state 12503 0
> nf_conntrack 52720 4 xt_state,nf_conntrack_ipv4,nf_nat,iptable_nat
> xt_multiport 12548 0
> xt_iprange 12504 0
> xt_comment 12427 0
> ip6table_filter 12540 0
> ip6_tables 22175 1 ip6table_filter
> iptable_filter 12536 0
> ip_tables 22042 3 iptable_filter,iptable_mangle,iptable_nat
> ipt_ULOG 16833 1
> x_tables 19073 14 ipt_ULOG,ip_tables,iptable_filter,ip6_tables,ip6ta ble_filter,xt_comment,xt_iprange,xt_multiport,xt_s tate,xt_length,xt_limit,iptable_mangle,xt_owner,ip table_nat
14 and all fourteen are listed

> parport_pc 22364 0
> ppdev 12763 0
> lp 17149 0
> parport 31858 3 lp,ppdev,parport_pc
> nfsd 211858 2
> nfs 312243 0
> nfs_acl 12511 2 nfs,nfsd
> auth_rpcgss 37143 2 nfs,nfsd
> fscache 36739 1 nfs
> lockd 67328 2 nfs,nfsd
> sunrpc 173671 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
> loop 22641 0
> firewire_sbp2 17993 0
> snd_usb_audio 84836 2
> snd_usbmidi_lib 23420 1 snd_usb_audio
> snd_seq_midi 12848 0
> snd_seq_midi_event 13316 1 snd_seq_midi
> snd_rawmidi 23060 2 snd_seq_midi,snd_usbmidi_lib
> uinput 17440 2
> snd_hda_codec_hdmi 30783 5
> snd_hda_codec_realtek 188797 1
> joydev 17266 0
> usbhid 36379 0
> hid 81288 1 usbhid
> nvidia 10823460 41
41 and NON of the *fourty-one* is listed, notice the big size

> coretemp 12898 0
> crc32c_intel 12747 0
> ghash_clmulni_intel 13133 0
> snd_hda_intel 26345 3
> snd_hda_codec 78031 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_ hdmi
> mxm_wmi 12473 0
> snd_hwdep 13186 2 snd_hda_codec,snd_usb_audio
> evdev 17562 24
24 modules for http://en.wikipedia.org/wiki/Evdev

> snd_pcm 63900 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd _usb_audio
> aesni_intel 50667 0
> snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
> snd_seq 45093 2 snd_seq_midi_event,snd_seq_midi
> aes_x86_64 16796 1 aesni_intel
> snd_seq_device 13176 3 snd_seq,snd_rawmidi,snd_seq_midi
> aes_generic 33026 2 aes_x86_64,aesni_intel
> snd_timer 22917 2 snd_seq,snd_pcm
> cryptd 14517 2 aesni_intel,ghash_clmulni_intel
> i2c_i801 16870 0
> psmouse 64455 0
> iTCO_wdt 17081 0
> serio_raw 12931 0
> pcspkr 12579 0
> snd 52850 22 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep ,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek ,snd_hda_codec_hdmi,snd_rawmidi,snd_usbmidi_lib,sn d_usb_audio
22 modules and probably all twentytwo listed

> i2c_core 23876 2 i2c_i801,nvidia
> iTCO_vendor_support 12704 1 iTCO_wdt
> soundcore 13065 1 snd
> acpi_cpufreq 12935 0

Found an acpi related module


> mperf 12453 1 acpi_cpufreq
> wmi 13243 1 mxm_wmi
> video 17628 0
> processor 28157 1 acpi_cpufreq
> button 12937 0
> ext4 350411 3
> crc16 12343 1 ext4
> jbd2 62015 1 ext4
> mbcache 13065 1 ext4
> sr_mod 21899 0
> cdrom 35401 1 sr_mod
> sd_mod 36136 5
> crc_t10dif 12348 1 sd_mod
> ahci 24997 4
> firewire_ohci 35772 0
> libahci 22860 1 ahci
> firewire_core 48407 2 firewire_ohci,firewire_sbp2
> crc_itu_t 12347 1 firewire_core
> libata 140589 2 libahci,ahci
> scsi_mod 162372 4 libata,sd_mod,sr_mod,firewire_sbp2
> atl1c 32217 0
> ehci_hcd 40215 0
> e1000e 120822 0
> xhci_hcd 73170 0
> thermal 17383 0
> fan 12674 0
> thermal_sys 18040 4 fan,thermal,processor,video
> usbcore 128498 7 xhci_hcd,ehci_hcd,usbhid,snd_usbmidi_lib,snd_usb_a udio
> usb_common 12354 1 usbcore
>
>
>
> -- Package-specific info:
> ** Version:
> Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=79c5c74d-1b80-4fb0-93d4-840c563af818 ro quiet
>
> ** Tainted: PO (4097)
> * Proprietary module has been loaded.
> * Out-of-tree module has been loaded.
Those _could be_ the cullprit.

>
> ** Kernel log:
> [ 3.984689] usb 3-1.2.1.4: Product: USB2.0 Hub

Where are the earlier messages?


> [ 3.985192] hub 3-1.2.1.4:1.0: USB hub found
> [ 3.985514] hub 3-1.2.1.4:1.0: 4 ports detected
> [ 4.009291] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.2/3-1.2.1.2:1.0/input/input3
> [ 4.009408] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1a.0-1.2.1.2/input0
> [ 4.013319] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.2/3-1.2.1.2:1.1/input/input4
> [ 4.013581] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1a.0-1.2.1.2/input1
> [ 4.013590] usbcore: registered new interface driver usbhid
> [ 4.013591] usbhid: USB HID core driver
> [ 4.058464] usb 3-1.2.1.1.1: new low-speed USB device number 10 using ehci_hcd
> [ 4.156361] usb 3-1.2.1.1.1: New USB device found, idVendor=046d, idProduct=c226
> [ 4.156366] usb 3-1.2.1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 4.156368] usb 3-1.2.1.1.1: Product: G15 Gaming Keyboard
> [ 4.160190] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.1/3-1.2.1.1.1:1.0/input/input5
> [ 4.160318] generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1.1.1/input0
> [ 4.166395] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.1/3-1.2.1.1.1:1.1/input/input6
> [ 4.166578] generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1.1.1/input1
> [ 4.214669] hda_codec: ALC898: BIOS auto-probing.
> [ 4.225827] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
> [ 4.226010] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
> [ 4.226205] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 4.226324] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 4.226679] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 4.226883] snd_hda_intel 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 4.226886] hda_intel: Disabling MSI
> [ 4.226981] snd_hda_intel 0000:07:00.1: setting latency timer to 64
> [ 4.238304] usb 3-1.2.1.1.4: new full-speed USB device number 11 using ehci_hcd
> [ 4.333617] usb 3-1.2.1.1.4: New USB device found, idVendor=046d, idProduct=c227
> [ 4.333622] usb 3-1.2.1.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 4.333624] usb 3-1.2.1.1.4: Product: G15 GamePanel LCD
> [ 4.352622] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.1/3-1.2.1.1.4/3-1.2.1.1.4:1.0/input/input10
> [ 4.352947] generic-usb 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.0-1.2.1.1.4/input0
> [ 4.426114] usb 3-1.2.1.4.3: new full-speed USB device number 12 using ehci_hcd
> [ 4.520933] usb 3-1.2.1.4.3: New USB device found, idVendor=03f0, idProduct=6104
> [ 4.520938] usb 3-1.2.1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 4.520941] usb 3-1.2.1.4.3: Product: deskjet 5600
> [ 4.520943] usb 3-1.2.1.4.3: Manufacturer: hp
> [ 4.520945] usb 3-1.2.1.4.3: SerialNumber: MY36M2K30R89
> [ 4.594040] usb 3-1.2.1.4.4: new full-speed USB device number 13 using ehci_hcd
> [ 4.692157] usb 3-1.2.1.4.4: New USB device found, idVendor=046d, idProduct=0a0b
> [ 4.692162] usb 3-1.2.1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.692165] usb 3-1.2.1.4.4: Product: Logitech USB Headset
> [ 4.692167] usb 3-1.2.1.4.4: Manufacturer: Logitech
> [ 4.694943] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1.4/3-1.2.1.4.4/3-1.2.1.4.4:1.3/input/input11
> [ 4.695206] generic-usb 0003:046D:0A0B.0006: input,hidraw5: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.0-1.2.1.4.4/input3
> [ 4.717544] usbcore: registered new interface driver snd-usb-audio
> [ 5.033241] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
> [ 5.065212] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
> [ 5.097160] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
> [ 5.129147] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
> [ 5.145205] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input12
> [ 5.145421] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input13
> [ 5.145610] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input14
> [ 5.145792] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:07:00.1/sound/card1/input15
> [ 8.281785] input: G15 Extra Keys as /devices/virtual/input/input16
> [ 8.522280] Adding 932860k swap on /dev/sda7. Priority:-1 extents:1 across:932860k SS
> [ 8.538573] EXT4-fs (sda1): re-mounted. Opts: (null)
> [ 8.585238] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
> [ 8.606610] loop: module loaded
> [ 9.614132] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> [ 9.622244] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
> [ 9.899033] RPC: Registered named UNIX socket transport module.
> [ 9.899037] RPC: Registered udp transport module.
> [ 9.899039] RPC: Registered tcp transport module.
> [ 9.899041] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 9.904735] FS-Cache: Loaded
> [ 9.913149] FS-Cache: Netfs 'nfs' registered for caching
> [ 9.918804] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 10.325750] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
> [ 10.618105] e1000e 0000:00:19.0: PME# enabled
> [ 11.119183] lp: driver loaded but no devices found
> [ 11.122348] ppdev: user-space parallel port driver
> [ 14.336170] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf6500000-0xf651ffff] (PCI address [0xf6500000-0xf651ffff])
> [ 14.336179] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf6536000-0xf6536fff] (PCI address [0xf6536000-0xf6536fff])
> [ 14.336185] e1000e 0000:00:19.0: BAR 2: set to [io 0xf000-0xf01f] (PCI address [0xf000-0xf01f])
> [ 14.336201] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> [ 14.336221] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
> [ 14.336266] e1000e 0000:00:19.0: PME# disabled
> [ 14.387058] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 14.480199] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
> [ 14.535998] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
> [ 14.536619] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 14.539136] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 14.548298] atl1c 0000:05:00.0: irq 48 for MSI/MSI-X
> [ 14.567981] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 14.632926] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 15.789067] e1000e 0000:00:19.0: PCI INT A disabled
> [ 15.789080] e1000e 0000:00:19.0: PME# enabled
> [ 17.437107] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf6500000-0xf651ffff] (PCI address [0xf6500000-0xf651ffff])
> [ 17.437115] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf6536000-0xf6536fff] (PCI address [0xf6536000-0xf6536fff])
> [ 17.437121] e1000e 0000:00:19.0: BAR 2: set to [io 0xf000-0xf01f] (PCI address [0xf000-0xf01f])
> [ 17.437137] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> [ 17.437159] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
> [ 17.437188] e1000e 0000:00:19.0: PME# disabled
> [ 17.437259] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
> [ 21.111178] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 21.111625] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 31.998890] eth1: no IPv6 routers present
> [ 459.452059] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 470.347806] eth1: no IPv6 routers present
>
> ** Model information
> sys_vendor: Gigabyte Technology Co., Ltd.
> product_name: To be filled by O.E.M.
> product_version: To be filled by O.E.M.
> chassis_vendor: Gigabyte Technology Co., Ltd.
> chassis_version: To Be Filled By O.E.M.
> bios_vendor: American Megatrends Inc.
> bios_version: F4
> board_vendor: Gigabyte Technology Co., Ltd.
> board_name: Z77X-UD5H
> board_version: x.x
>
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
> 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
> 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
> 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
> 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
> 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
> 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) (prog-if 01 [Subtractive decode])
> 00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
> 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) (prog-if 00 [Normal decode])
> 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
> 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
> 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0])
>
> 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
> Subsystem: Giga-byte Technology Device [1458:5001]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at f653a000 (64-bit, non-prefetchable) [size=256]
> Region 4: I/O ports at f020 [size=32]
>
> 02:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
> 03:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 30) (prog-if 01 [Subtractive decode])
> 04:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
> 05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
> 06:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
> 07:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF104 [GeForce GTX 460] [10de:0e22] (rev a1) (prog-if 00 [VGA controller])
> Kernel driver in use: nvidia

As far as I known is there "nouveau" the open source driver voor Nvidia.


> 07:00.1 Audio device [0403]: NVIDIA Corporation GF104 High Definition Audio Controller [10de:0beb] (rev a1)
>
>
> ** USB devices:
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 002: ID 2109:0810

According my web search an USB 3 device

> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 003: ID 2109:0810
> Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 003 Device 004: ID 2109:0810
> Bus 003 Device 005: ID 2109:0810
> Bus 003 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 003 Device 007: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub
> Bus 003 Device 008: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
> Bus 003 Device 009: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
> Bus 003 Device 010: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard
> Bus 003 Device 011: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard
> Bus 003 Device 012: ID 03f0:6104 Hewlett-Packard DeskJet 5650c
> Bus 003 Device 013: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB
>
>


My two cents
Cheers
Geert Stappers
--
> And is there a policy on top-posting vs. bottom-posting?
Yes.


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120825171228.GR22413@gpm.stappers.nl">http://lists.debian.org/20120825171228.GR22413@gpm.stappers.nl

Ben Hutchings 08-26-2012 12:49 AM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
On Sat, 2012-08-25 at 17:25 +0200, novice wrote:
> Package: src:linux
> Version: 3.2.23-1

What was the last version where you could halt successfully?

> Severity: important
>
>
> Use root :
> command:
>
> halt
> halt -p
> shutdown (all paramettre tested)
>
> result:
> reboot,

Is the system booted through BIOS or UEFI? (There is a known bug like
this when using UEFI.)

[...]
> ** Tainted: PO (4097)
> * Proprietary module has been loaded.
> * Out-of-tree module has been loaded.
[...]
> ** Loaded modules:
[...]
> nvidia(P)
[...]

Does this happen if you use nouveau instead of nvidia?

Ben.

--
Ben Hutchings
Experience is what causes a person to make new mistakes instead of old ones.

Ben Hutchings 08-27-2012 10:51 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
-------- Forwarded Message --------
From: novice <gavotte@panthere-noire.com>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
Date: Sun, 26 Aug 2012 12:33:38 +0200

Le 26. 08. 12 02:49, Ben Hutchings a écrit :
> On Sat, 2012-08-25 at 17:25 +0200, novice wrote:
> > Package: src:linux
> > Version: 3.2.23-1
> What was the last version where you could halt successfully?
>
> > Severity: important
> >
> >
> > Use root :
> > command:
> >
> > halt
> > halt -p
> > shutdown (all paramettre tested)
> >
> > result:
> > reboot,
> Is the system booted through BIOS or UEFI? (There is a known bug like
> this when using UEFI.)
UFEI not available

Bios: 08/26/2012: bios id 8A01AG0E
option approaching:
Pci Rom priority: 2 value
Legacy Rom
EFI compatible Rom

2 value = reboot

> [...]
> > ** Tainted: PO (4097)
> > * Proprietary module has been loaded.
> > * Out-of-tree module has been loaded.
> [...]
> > ** Loaded modules:
> [...]
> > nvidia(P)
> [...]
>
> Does this happen if you use nouveau instead of nvidia?
>
> Ben.
nvidia , im tested , and console only , close kde, or use mode rescue in
grub (tty1)
result [while now restart]


thank you for your answer


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1346107862.20840.62.camel@deadeye.wl.decadent.org. uk">http://lists.debian.org/1346107862.20840.62.camel@deadeye.wl.decadent.org. uk

Ben Hutchings 08-27-2012 11:49 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
[Please reply to all, including the address 685864@bugs.debian.org]

On Sun, 2012-08-26 at 12:33 +0200, novice wrote:
> Le 26. 08. 12 02:49, Ben Hutchings a écrit :
> > On Sat, 2012-08-25 at 17:25 +0200, novice wrote:
> > > Package: src:linux
> > > Version: 3.2.23-1
> > What was the last version where you could halt successfully?
> >
> > > Severity: important
> > >
> > >
> > > Use root :
> > > command:
> > >
> > > halt
> > > halt -p
> > > shutdown (all paramettre tested)
> > >
> > > result:
> > > reboot,
> > Is the system booted through BIOS or UEFI? (There is a known bug like
> > this when using UEFI.)
> UFEI not available
>
> Bios: 08/26/2012: bios id 8A01AG0E
> option approaching:
> Pci Rom priority: 2 value
> Legacy Rom
> EFI compatible Rom
>
> 2 value = reboot

Do you mean that you tried both values for that option?

> > [...]
> > > ** Tainted: PO (4097)
> > > * Proprietary module has been loaded.
> > > * Out-of-tree module has been loaded.
> > [...]
> > > ** Loaded modules:
> > [...]
> > > nvidia(P)
> > [...]
> >
> > Does this happen if you use nouveau instead of nvidia?
> >
> > Ben.
> nvidia , im tested , and console only , close kde, or use mode rescue
> in grub (tty1)
> result [while now restart]

I don't understand what you're saying. I want you to try this:

1. Uninstall the nvidia driver (or somehow stop it from loading)
2. Reboot
3. Run 'shutdown'

Ben.

--
Ben Hutchings
One of the nice things about standards is that there are so many of them.

Ben Hutchings 08-28-2012 05:11 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
-------- Forwarded Message --------
From: novice <gavotte@panthere-noire.com>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
Date: Tue, 28 Aug 2012 03:06:46 +0200

Le 28. 08. 12 01:49, Ben Hutchings a écrit :
> [Please reply to all, including the address 685864@bugs.debian.org]
>
> On Sun, 2012-08-26 at 12:33 +0200, novice wrote:
> > Le 26. 08. 12 02:49, Ben Hutchings a écrit :
> > > On Sat, 2012-08-25 at 17:25 +0200, novice wrote:
> > > > Package: src:linux
> > > > Version: 3.2.23-1
> > > What was the last version where you could halt successfully?
> > >
> > > > Severity: important
> > > >
> > > >
> > > > Use root :
> > > > command:
> > > >
> > > > halt
> > > > halt -p
> > > > shutdown (all paramettre tested)
> > > >
> > > > result:
> > > > reboot,
> > > Is the system booted through BIOS or UEFI? (There is a known bug like
> > > this when using UEFI.)
> > UFEI not available
> >
> > Bios: 08/26/2012: bios id 8A01AG0E
> > option approaching:
> > Pci Rom priority: 2 value
> > Legacy Rom
> > EFI compatible Rom
> >
> > 2 value = reboot
> Do you mean that you tried both values for that option?
yes
>
> > > [...]
> > > > ** Tainted: PO (4097)
> > > > * Proprietary module has been loaded.
> > > > * Out-of-tree module has been loaded.
> > > [...]
> > > > ** Loaded modules:
> > > [...]
> > > > nvidia(P)
> > > [...]
> > >
> > > Does this happen if you use nouveau instead of nvidia?
> > >
> > > Ben.
> > nvidia , im tested , and console only , close kde, or use mode rescue
> > in grub (tty1)
> > result [while now restart]
> I don't understand what you're saying. I want you to try this:
>
> 1. Uninstall the nvidia driver (or somehow stop it from loading)
yes . I also tested
modprobe -r nvidia

> 2. Reboot
reboot .
> 3. Run 'shutdown'
>
> Ben.

use: shutdown -h nows
result reboot.



thank you for your patience


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 1346173919.15747.30.camel@deadeye.wl.decadent.org. uk">http://lists.debian.org/1346173919.15747.30.camel@deadeye.wl.decadent.org. uk

Geert Stappers 08-28-2012 07:59 PM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
[Please reply to all, including the address 685864@bugs.debian.org]

vrom: novice <gavotte@panthere-noire.com>
Date: Tue, 28 Aug 2012 03:06:46 +0200
> >
> > 1. Uninstall the nvidia driver (or somehow stop it from loading)
> yes . I also tested
> modprobe -r nvidia

`modprobe -r nvidia` removes the nvidia kernel module from memory.
It is the undo of `modprobe nvidia`, which loads it in memory.

BUT: modprode is MORE then just load and unload, there is also
programcode from the kernel module executed. During "load" there
is initialization done.

The request is uninstall the nvidia module. To remove it from disk.
With the effect to stop it from loading and executing init code.


> > 2. Reboot
> reboot .

That reboot is to clear initialiastion the nvidia driver could have done.

> > 3. Run 'shutdown'
> >
> > Ben.
>
> use: shutdown -h nows
> result reboot.
>

That is the reason for this ticket :-/


> thank you for your patience
>

This E-mail is / was about telling that "uninstall" is
more then `modprobe -r modulename`


Groeten
Geert Stappers
--
> And is there a policy on top-posting vs. bottom-posting?
Yes.


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120828195929.GW22413@gpm.stappers.nl">http://lists.debian.org/20120828195929.GW22413@gpm.stappers.nl

novice 08-29-2012 10:23 AM
Bug#685864: linux-image-3.2.0-3-amd64: Commande halt or halt -p and shutdown = reboot system. Cm :gigabyte z77x-ud5h
 
Le 28. 08. 12 21:59, Geert Stappers a écrit*:

[Please reply to all, including the address 685864@bugs.debian.org]

vrom: novice <gavotte@panthere-noire.com>
Date: Tue, 28 Aug 2012 03:06:46 +0200




1. Uninstall the nvidia driver (or somehow stop it from loading)


yes . I also tested
modprobe -r nvidia



`modprobe -r nvidia` removes the nvidia kernel module from memory.
It is the undo of `modprobe nvidia`, which loads it in memory.

BUT: modprode is MORE then just load and unload, there is also
programcode from the kernel module executed. During "load" there
is initialization done.

The request is uninstall the nvidia module. To remove it from disk.
With the effect to stop it from loading and executing init code.





2. Reboot


reboot .



That reboot is to clear initialiastion the nvidia driver could have done.




3. Run 'shutdown'

Ben.



use: shutdown -h nows
result reboot.




That is the reason for this ticket :-/




thank you for your patience




This E-mail is / was about telling that "uninstall" is
more then `modprobe -r modulename`


Groeten
Geert Stappers


Hello



all nvidia removed. and tested kernel linux-image-3.5-trunk-amd64 :
result is reboot :(




I'll
try to rebuild the kernel.
disable the vesa
video driver except



si ça marche , je vous tient aux courant


All times are GMT. The time now is 11:24 PM.

VBulletin, Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.