Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#685360: Acknowledgement (AMD SB 750 + Logitech USB keyboard broken and system unbootable with Linux 3.2 (regression from 2.6.38)) (http://www.linux-archive.org/debian-kernel/696007-bug-685360-acknowledgement-amd-sb-750-logitech-usb-keyboard-broken-system-unbootable-linux-3-2-regression-2-6-38-a.html)

Josip Rodin 08-20-2012 04:26 PM

Bug#685360: Acknowledgement (AMD SB 750 + Logitech USB keyboard broken and system unbootable with Linux 3.2 (regression from 2.6.38))
 
Well, this is silly. It appears I just wasn't patient enough - the Debian
kernel does boot, but it hangs between these two output lines:

Aug 20 18:14:52 pork kernel: [ 1.215573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 20 18:14:52 pork kernel: [ 1.396558] Linux agpgart interface v0.103

It stands at the Serial line for a good minute or so, and then it magically
continues. Curiously enough, the timers don't seem to notice this.

I'm attaching the full dmesg.

After booting, the only keyboard-related side-effect I saw was that my
keyboard reverted from Croatian to English, so I had to run 'setxkbmap hr'
manually to fix that.

I'll try to bisect this now with my config.

--
2. That which causes joy or happiness.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
[ 0.000000] BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 2767W4K/2767W4K, BIOS 7UET79WW (3.09 ) 10/13/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f6490] f6490
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 37b30000 - 37d90000
[ 0.000000] Allocated new RAMDISK: 3779e000 - 379fd6a7
[ 0.000000] Move RAMDISK from 0000000037b30000 - 0000000037d8f6a6 to 3779e000 - 379fd6a6
[ 0.000000] ACPI: RSDP 000f6450 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bfd49b7a 0009C (v01 LENOVO TP-7U 00003090 LTP 00000000)
[ 0.000000] ACPI: FACP bfd49d00 000F4 (v03 LENOVO TP-7U 00003090 LNVO 00000001)
[ 0.000000] ACPI: DSDT bfd4a10e 0FAC1 (v01 LENOVO TP-7U 00003090 MSFT 03000000)
[ 0.000000] ACPI: FACS bfd8e000 00040
[ 0.000000] ACPI: SSDT bfd49eb4 0025A (v01 LENOVO TP-7U 00003090 MSFT 03000000)
[ 0.000000] ACPI: ECDT bfd59bcf 00052 (v01 LENOVO TP-7U 00003090 LNVO 00000001)
[ 0.000000] ACPI: APIC bfd59c21 00078 (v01 LENOVO TP-7U 00003090 LNVO 00000001)
[ 0.000000] ACPI: MCFG bfd59c99 0003C (v01 LENOVO TP-7U 00003090 LNVO 00000001)
[ 0.000000] ACPI: HPET bfd59cd5 00038 (v01 LENOVO TP-7U 00003090 LNVO 00000001)
[ 0.000000] ACPI: SLIC bfd59dc2 00176 (v01 LENOVO TP-7U 00003090 LTP 00000000)
[ 0.000000] ACPI: BOOT bfd59f38 00028 (v01 LENOVO TP-7U 00003090 LTP 00000001)
[ 0.000000] ACPI: ASF! bfd59f60 000A0 (v16 LENOVO TP-7U 00003090 PTL 00000001)
[ 0.000000] ACPI: SSDT bfd8d1fa 00568 (v01 LENOVO TP-7U 00003090 INTL 20050513)
[ 0.000000] ACPI: TCPA bfb07000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR bfb06000 000D8 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4166MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf8a1
[ 0.000000] 0: 0x000bf8a7 -> 0x000bf9b7
[ 0.000000] 0: 0x000bfa0f -> 0x000bfac6
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1030647
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f501d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8333 pages used for memmap
[ 0.000000] HighMem zone: 794590 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f4e00000 s33024 r0 d24320 u524288
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1020534
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=7db5f03b-e570-4cfe-a30d-03d1892a6a0a ro resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0013c000)
[ 0.000000] Memory: 4073364k/5177344k available (2841k kernel code, 49224k reserved, 1372k data, 412k init, 3211692k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c65ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c65ac (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4806000 soft=f4808000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2260.873 MHz processor.
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.74 BogoMIPS (lpj=9043492)
[ 0.004120] pid_max: default: 32768 minimum: 301
[ 0.004213] Security Framework initialized
[ 0.004277] AppArmor: AppArmor disabled by boot time parameter
[ 0.004351] Mount-cache hash table entries: 512
[ 0.004523] Initializing cgroup subsys cpuacct
[ 0.004586] Initializing cgroup subsys memory
[ 0.004651] Initializing cgroup subsys devices
[ 0.004711] Initializing cgroup subsys freezer
[ 0.004770] Initializing cgroup subsys net_cls
[ 0.004829] Initializing cgroup subsys blkio
[ 0.004893] Initializing cgroup subsys perf_event
[ 0.004974] Disabled fast string operations
[ 0.005035] CPU: Physical Processor ID: 0
[ 0.005094] CPU: Processor Core ID: 0
[ 0.005152] mce: CPU supports 6 MCE banks
[ 0.005216] CPU0: Thermal monitoring enabled (TM2)
[ 0.005278] using mwait in idle threads.
[ 0.005742] ACPI: Core revision 20110623
[ 0.016049] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058194] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f48f2000 soft=f48f4000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.152035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152248] Brought up 2 CPUs
[ 0.152310] Total of 2 processors activated (9043.72 BogoMIPS).
[ 0.154283] devtmpfs: initialized
[ 0.154283] PM: Registering ACPI NVS region at bfac6000 (45056 bytes)
[ 0.154283] PM: Registering ACPI NVS region at bfad8000 (16384 bytes)
[ 0.154283] PM: Registering ACPI NVS region at bfadf000 (159744 bytes)
[ 0.154283] PM: Registering ACPI NVS region at bfd0f000 (589824 bytes)
[ 0.154283] print_constraints: dummy:
[ 0.154283] NET: Registered protocol family 16
[ 0.154283] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.154283] ACPI: bus type pci registered
[ 0.156083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.156154] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.156217] PCI: Using MMCONFIG for extended config space
[ 0.156280] PCI: Using configuration type 1 for base access
[ 0.156946] bio: create slab <bio-0> at 0
[ 0.156946] ACPI: Added _OSI(Module Device)
[ 0.156946] ACPI: Added _OSI(Processor Device)
[ 0.156946] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156946] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.156946] ACPI: Added _OSI(Linux)
[ 0.161028] ACPI: EC: EC description table is found, configuring boot EC
[ 0.167723] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.184492] ACPI: SSDT bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.185087] ACPI: Dynamic OEM Table Load:
[ 0.185256] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.185582] ACPI: SSDT bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.186211] ACPI: Dynamic OEM Table Load:
[ 0.186380] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.208267] ACPI: SSDT bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.208882] ACPI: Dynamic OEM Table Load:
[ 0.209051] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.220108] ACPI: SSDT bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.220702] ACPI: Dynamic OEM Table Load:
[ 0.220871] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.236181] ACPI: Interpreter enabled
[ 0.236247] ACPI: (supports S0 S3 S4 S5)
[ 0.236537] ACPI: Using IOAPIC for interrupt routing
[ 0.248055] ACPI: Power Resource [PUBS] (on)
[ 0.256822] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.256680] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.256744] HEST: Table not found.
[ 0.256807] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.257139] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.257261] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.257325] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.257390] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.257459] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.257529] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.257598] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.257678] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.257723] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.257765] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.257768] pci 0000:00:01.0: PME# disabled
[ 0.257787] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.257804] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
[ 0.257855] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.257859] pci 0000:00:03.0: PME# disabled
[ 0.257878] pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700
[ 0.257892] pci 0000:00:03.3: reg 10: [io 0x1828-0x182f]
[ 0.257899] pci 0000:00:03.3: reg 14: [mem 0xfc224000-0xfc224fff]
[ 0.258009] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.258034] pci 0000:00:19.0: reg 10: [mem 0xfc200000-0xfc21ffff]
[ 0.258046] pci 0000:00:19.0: reg 14: [mem 0xfc225000-0xfc225fff]
[ 0.258058] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.258148] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.258153] pci 0000:00:19.0: PME# disabled
[ 0.258179] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.258236] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.258306] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.258364] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.258433] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.258490] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.258571] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.260032] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
[ 0.260146] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.260151] pci 0000:00:1a.7: PME# disabled
[ 0.260184] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.260205] pci 0000:00:1b.0: reg 10: [mem 0xfc220000-0xfc223fff 64bit]
[ 0.260304] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.260309] pci 0000:00:1b.0: PME# disabled
[ 0.260338] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.260443] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.260448] pci 0000:00:1c.0: PME# disabled
[ 0.260479] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.260583] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.260588] pci 0000:00:1c.1: PME# disabled
[ 0.260621] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.260726] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.260731] pci 0000:00:1c.3: PME# disabled
[ 0.260762] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.260866] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260871] pci 0000:00:1c.4: PME# disabled
[ 0.260906] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.260964] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.261033] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.261090] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.261161] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.261218] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.261299] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.261325] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
[ 0.261438] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.261443] pci 0000:00:1d.7: PME# disabled
[ 0.261469] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.261562] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.261733] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.261761] pci 0000:00:1f.2: reg 10: [io 0x1c40-0x1c47]
[ 0.261773] pci 0000:00:1f.2: reg 14: [io 0x1834-0x1837]
[ 0.261784] pci 0000:00:1f.2: reg 18: [io 0x1838-0x183f]
[ 0.261796] pci 0000:00:1f.2: reg 1c: [io 0x1830-0x1833]
[ 0.261807] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.261819] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
[ 0.261890] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.261894] pci 0000:00:1f.2: PME# disabled
[ 0.261918] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.261940] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
[ 0.261970] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.262050] pci 0000:01:00.0: [1002:95c4] type 0 class 0x000300
[ 0.262066] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.262077] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.262088] pci 0000:01:00.0: reg 18: [mem 0xcfff0000-0xcfffffff]
[ 0.262126] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.262176] pci 0000:01:00.0: supports D1 D2
[ 0.262204] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.262268] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.262272] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff]
[ 0.262276] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.262335] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.262526] pci 0000:03:00.0: [8086:4236] type 0 class 0x000280
[ 0.262570] pci 0000:03:00.0: reg 10: [mem 0xf4200000-0xf4201fff 64bit]
[ 0.262776] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.262787] pci 0000:03:00.0: PME# disabled
[ 0.262883] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.262952] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.263016] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.263082] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.263087] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.263095] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.263154] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.263220] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.263225] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.263233] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.263280] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.263308] pci 0000:15:00.0: reg 10: [mem 0xf4300000-0xf4300fff]
[ 0.263351] pci 0000:15:00.0: supports D1 D2
[ 0.263353] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263359] pci 0000:15:00.0: PME# disabled
[ 0.263384] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
[ 0.263410] pci 0000:15:00.1: reg 10: [mem 0xf4301000-0xf43017ff]
[ 0.263528] pci 0000:15:00.1: supports D1 D2
[ 0.263530] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263536] pci 0000:15:00.1: PME# disabled
[ 0.263616] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.263683] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.263688] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.263696] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.263699] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.263702] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.263704] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.263707] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.263710] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.263713] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.263798] pci_bus 0000:00: on NUMA node 0
[ 0.263801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.263960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.263994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.264042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.264080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.264117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.264422] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.264900] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.270756] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.271339] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.271921] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.272506] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.273087] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.273668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.274249] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.274829] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.275575] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.275575] vgaarb: loaded
[ 0.275575] vgaarb: bridge control possible 0000:01:00.0
[ 0.275575] PCI: Using ACPI for IRQ routing
[ 0.278089] PCI: pci_cache_line_size set to 64 bytes
[ 0.278199] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.278202] reserve RAM buffer: 00000000bf8a1000 - 00000000bfffffff
[ 0.278207] reserve RAM buffer: 00000000bf9b7000 - 00000000bfffffff
[ 0.278213] reserve RAM buffer: 00000000bfac6000 - 00000000bfffffff
[ 0.278217] reserve RAM buffer: 00000000bfe00000 - 00000000bfffffff
[ 0.278328] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.278391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.278678] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.284160] Switching to clocksource hpet
[ 0.285697] pnp: PnP ACPI init
[ 0.285763] ACPI: bus type pnp registered
[ 0.306239] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.306242] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.306244] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.306246] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.306248] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.306250] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.306253] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.306255] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.306257] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.306259] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.306261] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.306263] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.306266] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.306268] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.306270] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.306272] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.306274] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.306341] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.306400] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.306458] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.306516] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.306574] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.306632] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.306690] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.306749] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.306807] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.306865] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.306923] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.306981] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.307039] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.307097] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.307155] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.307213] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.307234] pnp 00:01: [bus 00-ff]
[ 0.307236] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.307239] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.307241] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.307243] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.307246] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.307248] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.307250] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.307254] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.307256] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.307258] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.307260] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.307263] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.307265] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.307267] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.307270] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.307272] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.307274] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.307276] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.307330] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.327468] pnp 00:02: [io 0x0010-0x001f]
[ 0.327471] pnp 00:02: [io 0x0090-0x009f]
[ 0.327473] pnp 00:02: [io 0x0024-0x0025]
[ 0.327475] pnp 00:02: [io 0x0028-0x0029]
[ 0.327477] pnp 00:02: [io 0x002c-0x002d]
[ 0.327479] pnp 00:02: [io 0x0030-0x0031]
[ 0.327481] pnp 00:02: [io 0x0034-0x0035]
[ 0.327483] pnp 00:02: [io 0x0038-0x0039]
[ 0.327485] pnp 00:02: [io 0x003c-0x003d]
[ 0.327487] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.327489] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.327491] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.327493] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.327495] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.327496] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.327498] pnp 00:02: [io 0x0050-0x0053]
[ 0.327500] pnp 00:02: [io 0x0072-0x0077]
[ 0.327502] pnp 00:02: [io 0x002e-0x002f]
[ 0.327504] pnp 00:02: [io 0x1000-0x107f]
[ 0.327506] pnp 00:02: [io 0x1180-0x11ff]
[ 0.327508] pnp 00:02: [io 0x0800-0x080f]
[ 0.327510] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.327512] pnp 00:02: [io 0x1600-0x167f]
[ 0.327514] pnp 00:02: [io 0x1680-0x169f]
[ 0.327517] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.327519] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.327521] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.327523] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.327525] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.327527] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.327615] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.327673] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.327730] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.327788] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.327845] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.327902] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.327960] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.328028] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.328086] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.328144] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.328202] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.328260] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.328318] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328356] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.328387] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.328397] pnp 00:04: [io 0x0000-0x000f]
[ 0.328399] pnp 00:04: [io 0x0080-0x008f]
[ 0.328401] pnp 00:04: [io 0x00c0-0x00df]
[ 0.328403] pnp 00:04: [dma 4]
[ 0.328434] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.328445] pnp 00:05: [io 0x0061]
[ 0.328475] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.328484] pnp 00:06: [io 0x00f0]
[ 0.328492] pnp 00:06: [irq 13]
[ 0.328524] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.328533] pnp 00:07: [io 0x0070-0x0071]
[ 0.328539] pnp 00:07: [irq 8]
[ 0.328569] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.328578] pnp 00:08: [io 0x0060]
[ 0.328580] pnp 00:08: [io 0x0064]
[ 0.328585] pnp 00:08: [irq 1]
[ 0.328616] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.328628] pnp 00:09: [irq 12]
[ 0.328662] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.348839] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.348891] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.349406] pnp: PnP ACPI: found 11 devices
[ 0.349462] ACPI: ACPI bus type pnp unregistered
[ 0.349518] PnPBIOS: Disabled by ACPI PNP
[ 0.386810] PCI: max bus depth: 2 pci_try_num: 3
[ 0.386870] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.386936] pci 0000:00:1c.1: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.386994] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.387053] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.387117] pci 0000:00:1c.0: BAR 13: assigned [io 0xa000-0xafff]
[ 0.387175] pci 0000:01:00.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref]
[ 0.387237] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.387293] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.387351] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff]
[ 0.387409] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.387474] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.387531] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff]
[ 0.387591] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.387650] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.387718] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.387775] pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff]
[ 0.387835] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.387895] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.387963] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.388036] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.388096] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.388156] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.388224] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.388281] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.388342] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.388401] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.388472] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.388529] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.388592] pci 0000:15:00.0: BAR 14: assigned [io 0x5000-0x50ff]
[ 0.388649] pci 0000:15:00.0: BAR 13: assigned [io 0x5400-0x54ff]
[ 0.388705] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.388761] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff]
[ 0.388821] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff]
[ 0.388881] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.388946] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.389007] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.389064] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.389125] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.389185] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.389262] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.389320] pci 0000:00:01.0: setting latency timer to 64
[ 0.389330] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.389389] pci 0000:00:1c.0: setting latency timer to 64
[ 0.389400] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.389459] pci 0000:00:1c.1: setting latency timer to 64
[ 0.389469] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.389529] pci 0000:00:1c.3: setting latency timer to 64
[ 0.389536] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.389595] pci 0000:00:1c.4: setting latency timer to 64
[ 0.389603] pci 0000:00:1e.0: setting latency timer to 64
[ 0.389611] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.389672] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.389675] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.389677] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.389679] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.389682] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.389684] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.389686] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.389689] pci_bus 0000:01: resource 1 [mem 0xcff00000-0xcfffffff]
[ 0.389691] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.389694] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.389696] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.389699] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.389701] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.389703] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf42fffff]
[ 0.389706] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.389708] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.389710] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.389713] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.389715] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
[ 0.389718] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.389720] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.389723] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff]
[ 0.389725] pci_bus 0000:15: resource 1 [mem 0xf4300000-0xf7ffffff]
[ 0.389727] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.389730] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.389732] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.389734] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.389737] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.389739] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.389741] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.389744] pci_bus 0000:16: resource 0 [io 0x5400-0x54ff]
[ 0.389746] pci_bus 0000:16: resource 1 [io 0x5000-0x50ff]
[ 0.389748] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.389751] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.389801] NET: Registered protocol family 2
[ 0.389916] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.390214] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.390596] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.390811] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.390867] TCP reno registered
[ 0.390922] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.390984] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.391115] NET: Registered protocol family 1
[ 0.391191] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.391248] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.391307] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.391382] pci 0000:00:1a.0: PCI INT A disabled
[ 0.393583] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.393657] pci 0000:00:1a.1: PCI INT B disabled
[ 0.393716] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.393773] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.393836] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.393911] pci 0000:00:1a.2: PCI INT C disabled
[ 0.393972] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.394030] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.394090] pci 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.394170] pci 0000:00:1a.7: PCI INT D disabled
[ 0.394242] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.394298] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.394357] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.394432] pci 0000:00:1d.0: PCI INT A disabled
[ 0.394496] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.394570] pci 0000:00:1d.1: PCI INT B disabled
[ 0.394634] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.394709] pci 0000:00:1d.2: PCI INT C disabled
[ 0.394770] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.394829] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.394892] pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.394965] pci 0000:00:1d.7: PCI INT D disabled
[ 0.395034] pci 0000:01:00.0: Boot video device
[ 0.395049] PCI: CLS 64 bytes, default 64
[ 0.395088] Unpacking initramfs...
[ 0.455842] Freeing initrd memory: 2432k freed
[ 0.456837] Simple Boot Flag at 0x35 set to 0x1
[ 0.457331] audit: initializing netlink socket (disabled)
[ 0.457398] type=2000 audit(1336843072.452:1): initialized
[ 0.475960] highmem bounce pool size: 64 pages
[ 0.476031] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487120] VFS: Disk quotas dquot_6.5.2
[ 0.487213] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.487340] msgmni has been set to 1687
[ 0.487563] alg: No test for stdrng (krng)
[ 0.487648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.487711] io scheduler noop registered
[ 0.487765] io scheduler deadline registered
[ 0.487832] io scheduler cfq registered (default)
[ 0.487980] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.488026] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.488122] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.488175] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.488293] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.488346] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.488466] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.488519] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.488638] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.488690] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.488827] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.488885] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.488943] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.488967] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.489026] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.489048] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.489105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.489164] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.489186] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.489246] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.489268] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.489327] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.489350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.489477] pciehp: Using ACPI for slot detection.
[ 0.489567] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[ 0.489653] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.489668] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.489725] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.490179] intel_idle: MWAIT substates: 0x3122220
[ 0.490181] intel_idle: does not run on family 6 model 23
[ 0.490210] ERST: Table is not found!
[ 0.490264] GHES: HEST is not enabled!
[ 0.490330] isapnp: Scanning for PnP cards...
[ 0.844447] isapnp: No Plug & Play device found
[ 0.844569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.852178] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.872413] 0000:00:03.3: ttyS0 at I/O 0x1828 (irq = 17) is a 16550A
[ 0.884184] Linux agpgart interface v0.103
[ 0.884582] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.892823] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.892883] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.893075] mousedev: PS/2 mouse device common for all mice
[ 0.893184] rtc_cmos 00:07: RTC can wake from S4
[ 0.893358] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.893442] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.893508] cpuidle: using governor ladder
[ 0.893563] cpuidle: using governor menu
[ 0.893800] TCP cubic registered
[ 0.893891] NET: Registered protocol family 10
[ 0.894414] Mobile IPv6
[ 0.894469] NET: Registered protocol family 17
[ 0.894535] Registering the dns_resolver key type
[ 0.894604] Using IPI No-Shortcut mode
[ 0.894773] PM: Checking hibernation image partition /dev/sda6
[ 0.898086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.905092] PM: Hibernation image not present or could not be loaded.
[ 0.905101] registered taskstats version 1
[ 0.911072] rtc_cmos 00:07: setting system clock to 2012-05-12 17:17:53 UTC (1336843073)
[ 0.911221] Initializing network drop monitor service
[ 0.911376] Freeing unused kernel memory: 412k freed
[ 0.911575] Write protecting the kernel text: 2844k
[ 0.911663] Write protecting the kernel read-only data: 1112k
[ 0.911718] NX-protecting the kernel data: 3300k
[ 0.924674] udevd[48]: starting version 175
[ 0.965338] SCSI subsystem initialized
[ 0.997711] libata version 3.00 loaded.
[ 0.998422] ahci 0000:00:1f.2: version 3.0
[ 0.998437] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.998552] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.998615] ahci: SSS flag set, parallel bus scan disabled
[ 0.998699] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.998768] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.998836] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.999520] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.999581] ACPI: Thermal Zone [THM0] (75 C)
[ 1.000631] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.000692] ACPI: Thermal Zone [THM1] (72 C)
[ 1.002739] scsi0 : ahci
[ 1.003666] scsi1 : ahci
[ 1.003805] scsi2 : ahci
[ 1.003934] scsi3 : ahci
[ 1.004406] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 45
[ 1.004474] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 45
[ 1.004539] ata3: DUMMY
[ 1.004594] ata4: DUMMY
[ 1.324030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.325148] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.325152] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.325407] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.325411] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.326563] ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133
[ 1.326621] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.327882] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.327886] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.328143] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.328147] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.329299] ata1.00: configured for UDMA/133
[ 1.329479] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5
[ 1.456022] Refined TSC clocksource calibration: 2260.999 MHz.
[ 1.456080] Switching to clocksource tsc
[ 1.648018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.650527] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.651607] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.651611] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.652735] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100
[ 1.655704] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.656796] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.656800] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.657894] ata2.00: configured for UDMA/100
[ 1.660279] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0 PQ: 0 ANSI: 5
[ 1.664649] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 1.664769] sd 0:0:0:0: [sda] Write Protect is off
[ 1.664827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.664851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.723610] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.724083] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.455815] PM: Starting manual resume from disk
[ 2.455877] PM: Hibernation image partition 8:6 present
[ 2.455879] PM: Looking for hibernation image.
[ 2.456050] PM: Image not found (code -22)
[ 2.456051] PM: Hibernation image not present or could not be loaded.
[ 2.475397] kjournald starting. Commit interval 5 seconds
[ 2.475415] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 4.253544] udevd[289]: starting version 175
[ 4.791767] Monitor-Mwait will be used to enter C-1 state
[ 4.791789] Monitor-Mwait will be used to enter C-2 state
[ 4.791809] Monitor-Mwait will be used to enter C-3 state
[ 4.791814] Marking TSC unstable due to TSC halts in idle
[ 4.791886] ACPI: acpi_idle registered with cpuidle
[ 4.792149] Switching to clocksource hpet
[ 4.933208] wmi: Mapper loaded
[ 5.009617] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 5.009678] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 5.009765] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.009835] e1000e 0000:00:19.0: setting latency timer to 64
[ 5.009969] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 5.162202] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 5.162431] ACPI: Lid Switch [LID]
[ 5.162542] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.164764] ACPI: Sleep Button [SLPB]
[ 5.164897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.164965] ACPI: Power Button [PWRF]
[ 5.180389] acpi device:08: registered as cooling_device2
[ 5.180540] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/LNXVIDEO:01/input/input4
[ 5.180607] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 5.202381] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:97:55:f8
[ 5.202447] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.202530] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 5.204035] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 5.204093] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 5.223221] usbcore: registered new interface driver usbfs
[ 5.223312] usbcore: registered new interface driver hub
[ 5.223415] usbcore: registered new device driver usb
[ 5.249551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.249635] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 5.249695] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 5.249759] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.249836] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.249840] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.249917] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.250008] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.253943] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 5.253963] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 5.272040] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.272138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.272197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.272260] usb usb1: Product: EHCI Host Controller
[ 5.272315] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 5.272371] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.272558] hub 1-0:1.0: USB hub found
[ 5.272620] hub 1-0:1.0: 6 ports detected
[ 5.272767] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.272829] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.272893] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.272971] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.272974] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.273038] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.273128] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.277077] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.277096] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 5.281677] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.292072] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.292179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.292236] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.292299] usb usb2: Product: EHCI Host Controller
[ 5.292354] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 5.292410] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.292586] hub 2-0:1.0: USB hub found
[ 5.292646] hub 2-0:1.0: 6 ports detected
[ 5.435084] ACPI: Battery Slot [BAT0] (battery present)
[ 5.520404] ACPI: AC Adapter [AC] (on-line)
[ 5.558533] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.558630] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 5.558688] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 5.558751] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.558819] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.558823] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.558888] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.558990] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 5.559083] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.559143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.559206] usb usb3: Product: UHCI Host Controller
[ 5.559261] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.559319] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.559492] hub 3-0:1.0: USB hub found
[ 5.559553] hub 3-0:1.0: 2 ports detected
[ 5.559685] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.559749] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.559752] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.559813] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.559908] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 5.559995] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.560071] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.560140] usb usb4: Product: UHCI Host Controller
[ 5.560195] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.560251] usb usb4: SerialNumber: 0000:00:1a.1
[ 5.560419] hub 4-0:1.0: USB hub found
[ 5.560479] hub 4-0:1.0: 2 ports detected
[ 5.560598] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 5.560656] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 5.560716] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5.560779] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.560782] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.560843] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.560939] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 5.561026] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.561084] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.561146] usb usb5: Product: UHCI Host Controller
[ 5.561201] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.561258] usb usb5: SerialNumber: 0000:00:1a.2
[ 5.561425] hub 5-0:1.0: USB hub found
[ 5.561484] hub 5-0:1.0: 2 ports detected
[ 5.561606] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.561664] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.561724] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.561787] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.561790] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.561850] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.561946] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 5.562034] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.562091] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.562154] usb usb6: Product: UHCI Host Controller
[ 5.562209] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.562265] usb usb6: SerialNumber: 0000:00:1d.0
[ 5.562431] hub 6-0:1.0: USB hub found
[ 5.562491] hub 6-0:1.0: 2 ports detected
[ 5.562618] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.562682] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.562685] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.562747] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.562842] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 5.562928] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.562985] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.563048] usb usb7: Product: UHCI Host Controller
[ 5.563103] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.563159] usb usb7: SerialNumber: 0000:00:1d.1
[ 5.563323] hub 7-0:1.0: USB hub found
[ 5.563382] hub 7-0:1.0: 2 ports detected
[ 5.563502] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.563565] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.563568] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.563629] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.563724] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 5.563809] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.563866] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.563929] usb usb8: Product: UHCI Host Controller
[ 5.563984] usb usb8: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 5.564063] usb usb8: SerialNumber: 0000:00:1d.2
[ 5.564228] hub 8-0:1.0: USB hub found
[ 5.564287] hub 8-0:1.0: 2 ports detected
[ 5.644909] Non-volatile memory driver v1.3
[ 5.668605] cfg80211: Calling CRDA to update world regulatory domain
[ 5.702282] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 5.702345] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.702402] thinkpad_acpi: ThinkPad BIOS 7UET79WW (3.09 ), EC 7VHT15WW-1.05
[ 5.702462] thinkpad_acpi: Lenovo ThinkPad T400, model 2767W4K
[ 5.726742] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.727058] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 5.727286] thinkpad_acpi: radio switch found; radios are enabled
[ 5.728822] thinkpad_acpi: tpacpi_rfk_hook_set_block: request to change radio state to unblocked
[ 5.729730] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 5.730352] thinkpad_acpi: tpacpi_rfk_hook_set_block: request to change radio state to unblocked
[ 5.732515] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 5.733096] Registered led device: tpacpi::thinklight
[ 5.733189] Registered led device: tpacpi::power
[ 5.733283] Registered led device: tpacpi::standby
[ 5.733533] Registered led device: tpacpi::thinkvantage
[ 5.735654] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.735795] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.737956] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 5.738466] thinkpad_acpi: tpacpi_rfk_hook_set_block: request to change radio state to unblocked
[ 5.739367] thinkpad_acpi: tpacpi_rfk_hook_set_block: request to change radio state to unblocked
[ 5.771841] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 5.771903] Copyright(c) 2003-2011 Intel Corporation
[ 5.772022] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.772086] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 5.772110] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 5.772165] iwlwifi 0000:03:00.0: pci_resource_base = f82d4000
[ 5.772221] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[ 5.772353] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
[ 5.772393] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[ 5.772509] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 5.791639] iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 5.791695] iwlwifi 0000:03:00.0: Device SKU: 0Xf0
[ 5.791984] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 5.792149] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[ 5.812065] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 5.824546] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 5.952823] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 5.952885] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 5.952945] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff]
[ 5.955175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[ 5.978062] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4300000-0xf7ffffff]
[ 5.978127] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4300000-0xf7ffffff: excluding 0xf4300000-0xf46cffff
[ 5.978338] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 5.978402] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff
[ 6.016714] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 6.016773] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.016831] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 6.016893] usb 2-4: Manufacturer: Ericsson
[ 6.016948] usb 2-4: SerialNumber: 3541430202471020
[ 6.066806] iTCO_vendor_support: vendor-support=0
[ 6.088722] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.088878] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 6.089247] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.117308] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.189830] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 6.190255] Registered led device: phy0-led
[ 6.284056] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 6.292158] firewire_core: created device fw0: GUID 00016c00006e56cd, S400
[ 6.309016] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 6.311175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 6.312140] pcmcia_socket pcmcia_socket

Josip Rodin 08-20-2012 04:27 PM

Bug#685360: Acknowledgement (AMD SB 750 + Logitech USB keyboard broken and system unbootable with Linux 3.2 (regression from 2.6.38))
 
On Mon, Aug 20, 2012 at 06:26:42PM +0200, Josip Rodin wrote:
> I'm attaching the full dmesg.

Sorry, wrong dmesg. This one.

--
2. That which causes joy or happiness.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.20-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jun 29 20:42:29 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=18515dea-973e-473b-bddf-74d1cb58e15a ro root=/dev/md0 reboot=warm
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-790XTA-UD4/GA-790XTA-UD4, BIOS F1 11/16/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF80000000 write-back
[ 0.000000] 5 base 000180000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 0001A0000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f45a0] f45a0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ cfede000-cfee0000
[ 0.000000] RAMDISK: 375c6000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f5fb0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee30c0 06E92 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: SSDT 00000000cfeea040 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfeea900 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfeea940 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfeea980 0039A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfee9f80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [00000001afffb000 - 00000001afffffff]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8801a9600000-ffff8801aebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572463
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801afc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548266
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=18515dea-973e-473b-bddf-74d1cb58e15a ro root=/dev/md0 reboot=warm
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 9144000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 6050776k/7077888k available (3517k kernel code, 788036k absent, 239076k reserved, 3216k data, 612k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.302 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.60 BogoMIPS (lpj=12053208)
[ 0.008079] pid_max: default: 32768 minimum: 301
[ 0.008153] Security Framework initialized
[ 0.008193] AppArmor: AppArmor disabled by boot time parameter
[ 0.008741] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014607] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016064] Mount-cache hash table entries: 256
[ 0.016196] Initializing cgroup subsys cpuacct
[ 0.016236] Initializing cgroup subsys memory
[ 0.016282] Initializing cgroup subsys devices
[ 0.016321] Initializing cgroup subsys freezer
[ 0.016358] Initializing cgroup subsys net_cls
[ 0.016395] Initializing cgroup subsys blkio
[ 0.016436] Initializing cgroup subsys perf_event
[ 0.016494] tseg: 00cff00000
[ 0.016496] CPU: Physical Processor ID: 0
[ 0.016533] CPU: Processor Core ID: 0
[ 0.016570] mce: CPU supports 6 MCE banks
[ 0.016613] using AMD E400 aware idle routine
[ 0.017274] ACPI: Core revision 20110623
[ 0.020627] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063428] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152022] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152018] System has AMD C1E enabled
[ 0.152034] Switch to broadcast mode on CPU1
[ 0.152209] #2
[ 0.152243] smpboot cpu 2: start_ip = 9a000
[ 0.244032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244025] Switch to broadcast mode on CPU2
[ 0.244177] #3 Ok.
[ 0.244213] smpboot cpu 3: start_ip = 9a000
[ 0.336043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336034] Switch to broadcast mode on CPU3
[ 0.336128] Brought up 4 CPUs
[ 0.336165] Total of 4 processors activated (24106.53 BogoMIPS).
[ 0.340127] Switch to broadcast mode on CPU0
[ 0.340170] devtmpfs: initialized
[ 0.345589] PM: Registering ACPI NVS region at cfee0000 (12288 bytes)
[ 0.345589] print_constraints: dummy:
[ 0.345589] NET: Registered protocol family 16
[ 0.345589] node 0 link 0: io port [9000, ffff]
[ 0.345589] TOM: 00000000d0000000 aka 3328M
[ 0.345589] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.345589] node 0 link 0: mmio [a0000, bffff]
[ 0.345589] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.345589] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.345589] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
[ 0.345589] TOM2: 00000001b0000000 aka 6912M
[ 0.345589] bus: [00, 06] on node 0 link 0
[ 0.345589] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.345589] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.345589] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.345589] bus: 00 index 3 [mem 0xe0700000-0xffffffff]
[ 0.345589] bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
[ 0.345589] bus: 00 index 5 [mem 0x1b0000000-0xfcffffffff]
[ 0.345589] Extended Config Space enabled on 1 nodes
[ 0.345589] ACPI: bus type pci registered
[ 0.345589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.345589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.363909] PCI: Using configuration type 1 for base access
[ 0.364467] bio: create slab <bio-0> at 0
[ 0.364467] ACPI: Added _OSI(Module Device)
[ 0.364467] ACPI: Added _OSI(Processor Device)
[ 0.364467] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.364467] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.364651] ACPI: EC: Look up EC in DSDT
[ 0.369626] ACPI: Interpreter enabled
[ 0.369666] ACPI: (supports S0 S3 S4 S5)
[ 0.369848] ACPI: Using IOAPIC for interrupt routing
[ 0.477800] ACPI: No dock devices found.
[ 0.477838] HEST: Table not found.
[ 0.477876] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.477962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.478102] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.478140] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.478178] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.478219] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.478260] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.478310] pci 0000:00:00.0: [1002:5958] type 0 class 0x000600
[ 0.478319] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.478352] pci 0000:00:03.0: [1002:5979] type 1 class 0x000604
[ 0.478380] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.478383] pci 0000:00:03.0: PME# disabled
[ 0.478395] pci 0000:00:05.0: [1002:597b] type 1 class 0x000604
[ 0.478421] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.478423] pci 0000:00:05.0: PME# disabled
[ 0.478435] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
[ 0.478460] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.478462] pci 0000:00:06.0: PME# disabled
[ 0.478473] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.478499] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.478501] pci 0000:00:07.0: PME# disabled
[ 0.478514] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.478540] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.478542] pci 0000:00:0a.0: PME# disabled
[ 0.478566] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.478584] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.478593] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.478602] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.478611] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.478619] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.478629] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.478648] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.478728] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.478740] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.478802] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.478814] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.478880] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.478898] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.478976] pci 0000:00:12.2: supports D1 D2
[ 0.478978] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.478981] pci 0000:00:12.2: PME# disabled
[ 0.479001] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.479014] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.479076] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.479088] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.479155] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.479172] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.479250] pci 0000:00:13.2: supports D1 D2
[ 0.479252] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.479255] pci 0000:00:13.2: PME# disabled
[ 0.479278] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.479373] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.479388] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.479397] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.479406] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.479415] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.479424] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.479479] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.479498] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.479561] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.479564] pci 0000:00:14.2: PME# disabled
[ 0.479577] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.479648] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.479688] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.479701] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.479764] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.479777] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.479788] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.479799] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.479812] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.479854] pci 0000:01:00.0: [1002:68be] type 0 class 0x000300
[ 0.479866] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.479875] pci 0000:01:00.0: reg 18: [mem 0xfdfc0000-0xfdfdffff 64bit]
[ 0.479881] pci 0000:01:00.0: reg 20: [io 0xae00-0xaeff]
[ 0.479892] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.480036] pci 0000:01:00.0: supports D1 D2
[ 0.480054] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.480065] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.480113] pci 0000:01:00.1: supports D1 D2
[ 0.488038] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.488077] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.488079] pci 0000:00:03.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.488083] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.488117] pci 0000:02:00.0: [1b4b:91a3] type 0 class 0x000101
[ 0.488131] pci 0000:02:00.0: reg 10: [io 0xef00-0xef07]
[ 0.488141] pci 0000:02:00.0: reg 14: [io 0xee00-0xee03]
[ 0.488150] pci 0000:02:00.0: reg 18: [io 0xed00-0xed07]
[ 0.488160] pci 0000:02:00.0: reg 1c: [io 0xec00-0xec03]
[ 0.488170] pci 0000:02:00.0: reg 20: [io 0xeb00-0xeb0f]
[ 0.488180] pci 0000:02:00.0: reg 24: [mem 0xfdeff000-0xfdeff7ff]
[ 0.488190] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.488237] pci 0000:02:00.0: PME# supported from D3hot
[ 0.488240] pci 0000:02:00.0: PME# disabled
[ 0.496039] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.496078] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.496080] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.496083] pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.496115] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.496178] pci 0000:03:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[ 0.496224] pci 0000:03:00.0: PME# supported from D3hot
[ 0.496228] pci 0000:03:00.0: PME# disabled
[ 0.496249] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.496267] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.496277] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
[ 0.496287] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.496297] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.496307] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.496367] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.499131] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.499170] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.499173] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.499176] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.499206] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.499220] pci 0000:04:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit]
[ 0.499284] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.499287] pci 0000:04:00.0: PME# disabled
[ 0.504038] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.504077] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.504080] pci 0000:00:07.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.504083] pci 0000:00:07.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.504114] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.504126] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.504145] pci 0000:05:00.0: reg 18: [mem 0xfd5ff000-0xfd5fffff 64bit pref]
[ 0.504157] pci 0000:05:00.0: reg 20: [mem 0xfd5f8000-0xfd5fbfff 64bit pref]
[ 0.504166] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.504209] pci 0000:05:00.0: supports D1 D2
[ 0.504210] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.504214] pci 0000:05:00.0: PME# disabled
[ 0.512039] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.512079] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.512081] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.512084] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.512128] pci 0000:06:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.512149] pci 0000:06:0e.0: reg 10: [mem 0xfd7ff000-0xfd7ff7ff]
[ 0.512161] pci 0000:06:0e.0: reg 14: [mem 0xfd7f8000-0xfd7fbfff]
[ 0.512249] pci 0000:06:0e.0: supports D1 D2
[ 0.512251] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.512255] pci 0000:06:0e.0: PME# disabled
[ 0.512287] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.512327] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.512331] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.512335] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.512337] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.512340] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.512342] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.512344] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.512346] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.512360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.512598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.512673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
[ 0.512702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.512729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.512756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.512785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.512814] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.512853] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.512894] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.523823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.524266] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.524694] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.525121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.525549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.525976] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.526404] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.526831] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.528056] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.528100] vgaarb: loaded
[ 0.528136] vgaarb: bridge control possible 0000:01:00.0
[ 0.528201] PCI: Using ACPI for IRQ routing
[ 0.536504] PCI: pci_cache_line_size set to 64 bytes
[ 0.536510] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.536631] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.536634] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.536724] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.536925] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.539000] Switching to clocksource hpet
[ 0.539062] pnp: PnP ACPI init
[ 0.539062] ACPI: bus type pnp registered
[ 0.539062] pnp 00:00: [bus 00-ff]
[ 0.539062] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.539062] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.539062] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.539062] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.539062] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.539062] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.539062] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.539062] pnp 00:01: [io 0x0010-0x001f]
[ 0.539062] pnp 00:01: [io 0x0022-0x003f]
[ 0.539062] pnp 00:01: [io 0x0044-0x005f]
[ 0.539062] pnp 00:01: [io 0x0062-0x0063]
[ 0.539062] pnp 00:01: [io 0x0065-0x006f]
[ 0.539062] pnp 00:01: [io 0x0074-0x007f]
[ 0.539062] pnp 00:01: [io 0x0091-0x0093]
[ 0.539062] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.539062] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.539062] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.539062] pnp 00:01: [io 0x0220-0x0225]
[ 0.539062] pnp 00:01: [io 0x0290-0x0294]
[ 0.539062] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.539062] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.539062] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.539062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.539062] pnp 00:02: [io 0x4100-0x411f]
[ 0.539062] pnp 00:02: [io 0x0228-0x022f]
[ 0.539062] pnp 00:02: [io 0x040b]
[ 0.539062] pnp 00:02: [io 0x04d6]
[ 0.539062] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.539062] pnp 00:02: [io 0x0c14]
[ 0.539062] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.539062] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.539062] pnp 00:02: [io 0x0c6f]
[ 0.539062] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.539062] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.539062] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.539062] pnp 00:02: [io 0x4000-0x40fe]
[ 0.539062] pnp 00:02: [io 0x4210-0x4217]
[ 0.539062] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.539062] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.539062] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.539062] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.539062] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.539062] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.539062] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.539062] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.539062] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.539062] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.539062] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.539062] system 00:02: [io 0x040b] has been reserved
[ 0.539062] system 00:02: [io 0x04d6] has been reserved
[ 0.539062] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.539062] system 00:02: [io 0x0c14] has been reserved
[ 0.539062] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.539062] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.539062] system 00:02: [io 0x0c6f] has been reserved
[ 0.539062] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.539062] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.539077] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.539115] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.539153] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.539191] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.539229] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.539268] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.539306] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.539348] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.539428] pnp 00:03: [dma 4]
[ 0.539429] pnp 00:03: [io 0x0000-0x000f]
[ 0.539431] pnp 00:03: [io 0x0080-0x0090]
[ 0.539432] pnp 00:03: [io 0x0094-0x009f]
[ 0.539434] pnp 00:03: [io 0x00c0-0x00df]
[ 0.539457] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.539482] pnp 00:04: [irq 0 disabled]
[ 0.539492] pnp 00:04: [irq 8]
[ 0.539494] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.539518] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.539539] pnp 00:05: [io 0x0070-0x0073]
[ 0.539562] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.539568] pnp 00:06: [io 0x0061]
[ 0.539590] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.539597] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.539604] pnp 00:07: [irq 13]
[ 0.539627] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.539806] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.539850] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.539889] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.539989] pnp 00:09: [mem 0x000d3000-0x000d3fff]
[ 0.539991] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 0.539993] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.539994] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.539996] pnp 00:09: [mem 0xcfee0000-0xcfefffff]
[ 0.540014] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.540016] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.540018] pnp 00:09: [mem 0x00100000-0xcfedffff]
[ 0.540020] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.540021] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.540024] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.540028] pnp 00:09: disabling [mem 0x000d3000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540071] pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540114] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540157] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540200] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540243] pnp 00:09: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.540336] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.540375] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.540413] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.540452] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.540490] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.540529] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.540546] pnp: PnP ACPI: found 10 devices
[ 0.540583] ACPI: ACPI bus type pnp unregistered
[ 0.547645] PCI: max bus depth: 1 pci_try_num: 2
[ 0.547667] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.547709] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.547747] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.547786] pci 0000:00:03.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.547824] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.547867] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.547908] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.547946] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.547984] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.548039] pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.548082] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.548120] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.548159] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.548197] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.548239] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.548277] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.548316] pci 0000:00:07.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.548355] pci 0000:00:07.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.548397] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd500000-0xfd51ffff pref]
[ 0.548438] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.548476] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.548515] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.548553] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.548596] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[ 0.548634] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.548675] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.548715] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.548771] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.548811] pci 0000:00:03.0: setting latency timer to 64
[ 0.548820] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.548858] pci 0000:00:05.0: setting latency timer to 64
[ 0.548867] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548906] pci 0000:00:06.0: setting latency timer to 64
[ 0.548909] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.548947] pci 0000:00:07.0: setting latency timer to 64
[ 0.548951] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548989] pci 0000:00:0a.0: setting latency timer to 64
[ 0.548995] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.548997] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.548999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.549001] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.549002] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.549004] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.549006] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.549008] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.549010] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.549011] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.549013] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.549015] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.549017] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.549019] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.549021] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.549023] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.549024] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.549026] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.549028] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.549030] pci_bus 0000:05: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.549032] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.549034] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.549035] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff pref]
[ 0.549037] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.549039] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.549041] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.549042] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.549044] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.549146] NET: Registered protocol family 2
[ 0.549361] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.550473] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.553321] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.553714] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.553752] TCP reno registered
[ 0.553800] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.554095] NET: Registered protocol family 1
[ 0.554173] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.636137] pci 0000:00:12.0: PCI INT A disabled
[ 0.636179] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.720148] pci 0000:00:12.1: PCI INT A disabled
[ 0.720191] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.720252] pci 0000:00:12.2: PCI INT B disabled
[ 0.720293] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.804146] pci 0000:00:13.0: PCI INT A disabled
[ 0.804188] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.888136] pci 0000:00:13.1: PCI INT A disabled
[ 0.888179] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.888239] pci 0000:00:13.2: PCI INT B disabled
[ 0.888291] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.972131] pci 0000:00:14.5: PCI INT C disabled
[ 0.972180] pci 0000:01:00.0: Boot video device
[ 0.972195] pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.972257] pci 0000:04:00.0: PCI INT A disabled
[ 0.972300] PCI: CLS 64 bytes, default 64
[ 0.972349] Unpacking initramfs...
[ 1.159479] Freeing initrd memory: 10408k freed
[ 1.163928] PCI-DMA: Disabling AGP.
[ 1.164067] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.164105] PCI-DMA: using GART IOMMU.
[ 1.164143] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.167546] IBS: LVT offset 1 assigned
[ 1.167602] perf: AMD IBS detected (0x0000001f)
[ 1.167821] audit: initializing netlink socket (disabled)
[ 1.167871] type=2000 audit(1345486164.160:1): initialized
[ 1.189035] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.213762] VFS: Disk quotas dquot_6.5.2
[ 1.213832] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.213930] msgmni has been set to 11967
[ 1.214165] alg: No test for stdrng (krng)
[ 1.214237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.214279] io scheduler noop registered
[ 1.214316] io scheduler deadline registered
[ 1.214377] io scheduler cfq registered (default)
[ 1.214551] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.214578] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[ 1.214676] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.214696] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.214779] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.214796] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 1.214874] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.214891] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 1.214973] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.214989] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 1.215054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.215111] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.215149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.215425] ERST: Table is not found!
[ 1.215462] GHES: HEST is not enabled!
[ 1.215573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.396558] Linux agpgart interface v0.103
[ 1.396683] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.397281] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.397322] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.397491] mousedev: PS/2 mouse device common for all mice
[ 1.397566] rtc_cmos 00:05: RTC can wake from S4
[ 1.397715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.397790] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.397839] cpuidle: using governor ladder
[ 1.397876] cpuidle: using governor menu
[ 1.398072] TCP cubic registered
[ 1.398180] NET: Registered protocol family 10
[ 1.398597] Mobile IPv6
[ 1.398635] NET: Registered protocol family 17
[ 1.398673] Registering the dns_resolver key type
[ 1.398844] PM: Hibernation image not present or could not be loaded.
[ 1.398852] registered taskstats version 1
[ 1.411485] rtc_cmos 00:05: setting system clock to 2012-08-20 18:14:24 UTC (1345486464)
[ 1.411560] Initializing network drop monitor service
[ 1.412506] Freeing unused kernel memory: 612k freed
[ 1.412654] Write protecting the kernel read-only data: 6144k
[ 1.414517] Freeing unused kernel memory: 560k freed
[ 1.416939] Freeing unused kernel memory: 720k freed
[ 1.427804] udev[95]: starting version 164
[ 1.441029] SCSI subsystem initialized
[ 1.442983] usbcore: registered new interface driver usbfs
[ 1.443040] usbcore: registered new interface driver hub
[ 1.449294] libata version 3.00 loaded.
[ 1.449378] usbcore: registered new device driver usb
[ 1.449907] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.449970] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.450035] r8169 0000:05:00.0: setting latency timer to 64
[ 1.450076] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 1.450410] r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc90000c1e000, 6c:f0:49:50:02:8b, XID 083000c0 IRQ 45
[ 1.450454] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.451103] ahci 0000:00:11.0: version 3.0
[ 1.451123] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.451259] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.451301] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.451866] firewire_ohci 0000:06:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.451951] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.452166] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 1.452169] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.452228] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.452390] xhci_hcd 0000:04:00.0: irq 19, io mem 0xfdafe000
[ 1.452542] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.452549] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 1.452555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.452558] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1.452563] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 1.452566] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1.452758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.452799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452841] usb usb1: Product: xHCI Host Controller
[ 1.452880] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 xhci_hcd
[ 1.452919] usb usb1: SerialNumber: 0000:04:00.0
[ 1.453096] xHCI xhci_add_endpoint called for root hub
[ 1.453098] xHCI xhci_check_bandwidth called for root hub
[ 1.453202] hub 1-0:1.0: USB hub found
[ 1.453247] hub 1-0:1.0: 2 ports detected
[ 1.453341] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.453382] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.455728] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.455767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455812] usb usb2: Product: xHCI Host Controller
[ 1.455849] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 xhci_hcd
[ 1.455887] usb usb2: SerialNumber: 0000:04:00.0
[ 1.455937] scsi0 : ahci
[ 1.456135] xHCI xhci_add_endpoint called for root hub
[ 1.456137] xHCI xhci_check_bandwidth called for root hub
[ 1.456160] hub 2-0:1.0: USB hub found
[ 1.456206] hub 2-0:1.0: 2 ports detected
[ 1.456292] scsi1 : ahci
[ 1.456400] scsi2 : ahci
[ 1.456504] scsi3 : ahci
[ 1.456629] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.456672] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.456714] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.456755] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.456852] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.456939] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.457009] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.457056] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.457116] ehci_hcd 0000:00:12.2: debug port 1
[ 1.457175] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.457226] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.457305] ahci 0000:02:00.0: irq 51 for MSI/MSI-X
[ 1.457318] ahci 0000:02:00.0: controller can do FBS, turning on CAP_FBS
[ 1.468163] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.468215] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.468267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.468312] usb usb3: Product: EHCI Host Controller
[ 1.468351] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[ 1.468389] usb usb3: SerialNumber: 0000:00:12.2
[ 1.468514] hub 3-0:1.0: USB hub found
[ 1.468553] hub 3-0:1.0: 6 ports detected
[ 1.468703] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.468752] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.468794] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.468839] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.468897] ehci_hcd 0000:00:13.2: debug port 1
[ 1.468951] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.476227] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
[ 1.476269] ahci 0000:02:00.0: flags: 64bit ncq fbs pio
[ 1.476309] ahci 0000:02:00.0: setting latency timer to 64
[ 1.477346] scsi4 : ahci
[ 1.477450] scsi5 : ahci
[ 1.477551] scsi6 : ahci
[ 1.477651] scsi7 : ahci
[ 1.477752] scsi8 : ahci
[ 1.477851] scsi9 : ahci
[ 1.477951] scsi10 : ahci
[ 1.478050] scsi11 : ahci
[ 1.478129] ata5: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff100 irq 51
[ 1.478172] ata6: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff180 irq 51
[ 1.478214] ata7: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff200 irq 51
[ 1.478256] ata8: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff280 irq 51
[ 1.478298] ata9: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff300 irq 51
[ 1.478340] ata10: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff380 irq 51
[ 1.478382] ata11: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff400 irq 51
[ 1.478424] ata12: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff480 irq 51
[ 1.478534] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.480165] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.480214] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.480253] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480293] usb usb4: Product: EHCI Host Controller
[ 1.480331] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[ 1.480368] usb usb4: SerialNumber: 0000:00:13.2
[ 1.480497] hub 4-0:1.0: USB hub found
[ 1.480537] hub 4-0:1.0: 6 ports detected
[ 1.496160] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.496202] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.496243] ahci 0000:03:00.0: setting latency timer to 64
[ 1.496529] scsi12 : ahci
[ 1.496632] scsi13 : ahci
[ 1.496712] ata13: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
[ 1.496755] ata14: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
[ 1.508216] firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.546583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.546687] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.546739] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.546783] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.546851] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.549372] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.549415] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.549476] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.549726] scsi14 : pata_jmicron
[ 1.549831] scsi15 : pata_jmicron
[ 1.549906] ata15: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 19
[ 1.549949] ata16: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 19
[ 1.604155] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.604195] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604236] usb usb5: Product: OHCI Host Controller
[ 1.604273] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.604311] usb usb5: SerialNumber: 0000:00:12.0
[ 1.604451] hub 5-0:1.0: USB hub found
[ 1.604493] hub 5-0:1.0: 3 ports detected
[ 1.604652] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.604704] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.604747] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 6
[ 1.607514] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.664112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.664151] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.664191] usb usb6: Product: OHCI Host Controller
[ 1.664229] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.664267] usb usb6: SerialNumber: 0000:00:12.1
[ 1.664405] hub 6-0:1.0: USB hub found
[ 1.664446] hub 6-0:1.0: 3 ports detected
[ 1.664605] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.664654] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.664696] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.664748] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.724136] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.724175] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724215] usb usb7: Product: OHCI Host Controller
[ 1.724253] usb usb7: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.724291] usb usb7: SerialNumber: 0000:00:13.0
[ 1.724416] hub 7-0:1.0: USB hub found
[ 1.724457] hub 7-0:1.0: 3 ports detected
[ 1.724610] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.724659] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.724701] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 8
[ 1.724753] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.776182] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.776274] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.784134] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.784172] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.784213] usb usb8: Product: OHCI Host Controller
[ 1.784250] usb usb8: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.784288] usb usb8: SerialNumber: 0000:00:13.1
[ 1.784417] hub 8-0:1.0: USB hub found
[ 1.784459] hub 8-0:1.0: 3 ports detected
[ 1.784618] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.784667] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.784709] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 1.784762] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.800162] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.800228] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.800295] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.800369] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.804156] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.808187] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.808259] ata12: SATA link up <unknown> (SStatus FFFFFF93 SControl 300)
[ 1.808524] ata12.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.808953] ata12.00: configured for UDMA/66
[ 1.812163] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.820169] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.820253] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.844137] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.844176] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.844216] usb usb9: Product: OHCI Host Controller
[ 1.844254] usb usb9: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ohci_hcd
[ 1.844292] usb usb9: SerialNumber: 0000:00:14.5
[ 1.844426] hub 9-0:1.0: USB hub found
[ 1.844467] hub 9-0:1.0: 2 ports detected
[ 1.844640] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.844980] scsi16 : pata_atiixp
[ 1.845085] scsi17 : pata_atiixp
[ 1.845560] ata17: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.845599] ata18: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.948159] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.952164] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.967601] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
[ 1.967641] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 1), AA
[ 1.968895] ata1.00: configured for UDMA/133
[ 1.969055] scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5
[ 1.990655] ata2.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
[ 1.990695] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.000149] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 2.015274] ata17.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 2.015332] firewire_core: created device fw0: GUID 00593df8006cf049, S400
[ 2.032552] ata17.00: configured for UDMA/33
[ 2.048965] ata2.00: configured for UDMA/133
[ 2.049106] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 2.049514] scsi 11:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 2.050667] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.050698] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.050798] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.050847] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.050878] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.050899] sd 0:0:0:0: [sda] Write Protect is off
[ 2.050902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.050936] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.097949] sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
[ 2.098485] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.128682] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.129196] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.164137] Switching to clocksource tsc
[ 2.168252] usb 5-1: New USB device found, idVendor=046d, idProduct=c51b
[ 2.168291] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.168329] usb 5-1: Product: USB Receiver
[ 2.168366] usb 5-1: Manufacturer: Logitech
[ 2.216700] scsi 16:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 2.224066] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.224168] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.224241] scsi 11:0:0:0: Attached scsi generic sg2 type 3
[ 2.224336] sr 16:0:0:0: Attached scsi generic sg3 type 5
[ 2.225207] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.225249] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.225391] sr 16:0:0:0: Attached scsi CD-ROM sr0
[ 2.464125] usb 5-2: new full-speed USB device number 3 using ohci_hcd
[ 2.637258] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.637298] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.637337] usb 5-2: Product: USB Receiver
[ 2.637374] usb 5-2: Manufacturer: Logitech
[ 2.648483] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/input/input0
[ 2.648590] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 2.654336] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 2.654480] usbcore: registered new interface driver usbhid
[ 2.654518] usbhid: USB HID core driver
[ 2.818190] md: raid1 personality registered for level 1
[ 2.826227] mdadm: sending ioctl 1261 to a partition!
[ 2.826268] mdadm: sending ioctl 1261 to a partition!
[ 2.826648] mdadm: sending ioctl 1261 to a partition!
[ 2.826686] mdadm: sending ioctl 1261 to a partition!
[ 2.827106] mdadm: sending ioctl 1261 to a partition!
[ 2.827143] mdadm: sending ioctl 1261 to a partition!
[ 2.827422] mdadm: sending ioctl 1261 to a partition!
[ 2.827459] mdadm: sending ioctl 1261 to a partition!
[ 2.827714] mdadm: sending ioctl 800c0910 to a partition!
[ 2.827752] mdadm: sending ioctl 800c0910 to a partition!
[ 2.916607] md: md0 stopped.
[ 2.917318] md: bind<sdb2>
[ 2.917491] md: bind<sda2>
[ 2.918365] bio: create slab <bio-1> at 1
[ 2.918464] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.918517] md0: detected capacity change from 0 to 5132451840
[ 2.919255] md0:
[ 2.977124] md: md2 stopped.
[ 2.977807] md: bind<sdb5>
[ 2.977967] md: bind<sda5>
[ 2.978841] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.978895] md2: detected capacity change from 0 to 20505493504
[ 2.980082] md2: unknown partition table
[ 3.102580] kjournald starting. Commit interval 5 seconds
[ 3.102591] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 4.718357] udev[465]: starting version 164
[ 5.336603] wmi: Mapper loaded
[ 5.534341] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.545844] ACPI: processor limited to max C-state 1
[ 5.631813] MCE: In-kernel MCE decoding enabled.
[ 5.634334] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
[ 5.643537] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0005/input/input2
[ 5.643640] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:12.0-2:1
[ 5.645547] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0005/input/input3
[ 5.645647] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:12.0-2:2
[ 5.651225] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.651298] ACPI: Power Button [PWRB]
[ 5.651388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.651451] ACPI: Power Button [PWRF]
[ 5.914377] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 5.914422] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.937433] EDAC MC: Ver: 2.1.0
[ 5.945100] AMD64 EDAC driver v3.4.0
[ 5.945177] EDAC amd64: DRAM ECC disabled.
[ 5.945221] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.945222] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.945223] (Note that use of the override may cause unknown side effects.)
[ 5.952063] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.952160] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 6.045674] [drm] Initialized drm 1.1.0 20060810
[ 6.182947] [drm] radeon kernel modesetting enabled.
[ 6.183080] radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.183123] radeon 0000:01:00.0: setting latency timer to 64
[ 6.183262] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x1458:0x21E9).
[ 6.183327] [drm] register mmio base: 0xFDFC0000
[ 6.183364] [drm] register mmio size: 131072
[ 6.185681] ATOM BIOS: GV
[ 6.185737] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 6.185779] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 6.190103] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 6.190143] [drm] RAM width 128bits DDR
[ 6.190242] [TTM] Zone kernel: Available graphics memory: 3064514 kiB.
[ 6.190279] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 6.190317] [TTM] Initializing pool allocator.
[ 6.190381] [drm] radeon: 1024M of VRAM memory ready
[ 6.190419] [drm] radeon: 512M of GTT memory ready.
[ 6.190469] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.190506] [drm] Driver supports precise vblank timestamp query.
[ 6.190577] radeon 0000:01:00.0: irq 52 for MSI/MSI-X
[ 6.190582] radeon 0000:01:00.0: radeon: using MSI.
[ 6.190647] [drm] radeon: irq initialized.
[ 6.190686] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.191326] [drm] Loading JUNIPER Microcode
[ 6.239068] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.239200] radeon 0000:01:00.0: WB enabled
[ 6.255314] [drm] ring test succeeded in 1 usecs
[ 6.255429] [drm] radeon: ib pool ready.
[ 6.255515] [drm] ib test succeeded in 0 usecs
[ 6.255835] [drm] Radeon Display Connectors
[ 6.255875] [drm] Connector 0:
[ 6.255911] [drm] HDMI-A
[ 6.255948] [drm] HPD5
[ 6.255985] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.256037] [drm] Encoders:
[ 6.256074] [drm] DFP1: INTERNAL_UNIPHY2
[ 6.256111] [drm] Connector 1:
[ 6.256147] [drm] DVI-D
[ 6.256183] [drm] HPD1
[ 6.256220] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.256260] [drm] Encoders:
[ 6.256296] [drm] DFP2: INTERNAL_UNIPHY1
[ 6.256333] [drm] Connector 2:
[ 6.256369] [drm] DVI-I
[ 6.256405] [drm] HPD6
[ 6.256442] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 6.256482] [drm] Encoders:
[ 6.256519] [drm] DFP3: INTERNAL_UNIPHY
[ 6.256555] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.256592] [drm] Connector 3:
[ 6.256628] [drm] VGA
[ 6.256665] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 6.256705] [drm] Encode

Josip Rodin 09-11-2012 10:46 PM

Bug#685360: Acknowledgement (AMD SB 750 + Logitech USB keyboard broken and system unbootable with Linux 3.2 (regression from 2.6.38))
 
Control: retitle -1 AMD SB 750 + Logitech USB keyboard brokenness with Linux 3.2 (regression from 3.1)

On Mon, Aug 20, 2012 at 06:26:42PM +0200, Josip Rodin wrote:
> I'll try to bisect this now with my config.

It looks like it's definitely in some way related with the introduction of
CONFIG_HID_LOGITECH_DJ in 3.2+, because 3.1.0 works fine...

--
2. That which causes joy or happiness.


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120911224629.GA32282@entuzijast.net">http://lists.debian.org/20120911224629.GA32282@entuzijast.net

Josip Rodin 09-12-2012 12:59 AM

Bug#685360: Acknowledgement (AMD SB 750 + Logitech USB keyboard broken and system unbootable with Linux 3.2 (regression from 2.6.38))
 
On Wed, Sep 12, 2012 at 12:46:29AM +0200, Josip Rodin wrote:
> On Mon, Aug 20, 2012 at 06:26:42PM +0200, Josip Rodin wrote:
> > I'll try to bisect this now with my config.
>
> It looks like it's definitely in some way related with the introduction of
> CONFIG_HID_LOGITECH_DJ in 3.2+, because 3.1.0 works fine...

The dmesg difference between 3.1.0 (working) and 3.2.0 (broken) is a bit
confusing - on one USB port, there's no change, but on the other the new
module reports a failure (this output is with hid.debug=1 and is a bit fuzzy
because of random harmless changes like spelling fixes or device indices
5 vs 3):

-usb 2-5: new high speed USB device number 2 using ehci_hcd
-usb 5-1: new low speed USB device number 2 using ohci_hcd
+usb 2-5: new high-speed USB device number 2 using ehci_hcd
+usb 3-1: new low-speed USB device number 2 using ohci_hcd
drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 0
-input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/input/input3
+input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3
generic-usb 0003:046D:C51B.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input
drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 1
drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0110 wIndex=0x0001 wLength=7
generic-usb 0003:046D:C51B.0002: claimed by neither input, hiddev nor hidraw
-usb 5-2: new full speed USB device number 3 using ohci_hcd
+usb 3-2: new full-speed USB device number 3 using ohci_hcd
drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 0
-drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Set_Report wValue=0x0200 wIndex=0x0000 wLength=1
-input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/input/input4
-generic-usb 0003:046D:C52B.0003: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/in
+drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 0
+drivers/hid/hid-logitech-dj.c: logi_dj_probe: ignoring ifnum 0
drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 1
-input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.1/input/input5
-generic-usb 0003:046D:C52B.0004: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input
+drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 1
+drivers/hid/hid-logitech-dj.c: logi_dj_probe: ignoring ifnum 1
drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 2
+drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 2
drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0110 wIndex=0x0002 wLength=7
drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0111 wIndex=0x0002 wLength=20
drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0120 wIndex=0x0002 wLength=15
drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0121 wIndex=0x0002 wLength=32
-generic-usb 0003:046D:C52B.0005: claimed by neither input, hiddev nor hidraw
-usb 2-5: reset high speed USB device number 2 using ehci_hcd
+logitech-djreceiver 0003:046D:C52B.0005: claimed by neither input, hiddev nor hidraw
+logitech-djreceiver 0003:046D:C52B.0005: logi_dj_probe:hid_hw_start returned error:-19

Now where did the devices 0003:046D:C52B.000[34] go with the new kernel?
Are they the ones that logi_dj_probe sees as 0 and 1?

The code says:

/* Ignore interfaces 0 and 1, they will not carry any data, dont create
* any hid_device for them */
if (intf->cur_altsetting->desc.bInterfaceNumber !=
LOGITECH_DJ_INTERFACE_NUMBER) {
dbg_hid("%s: ignoring ifnum %d
", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
return -ENODEV;
}

Well, that probably explains it. But why does it do that?

lsusb -v says the following about the hardware:

Bus 005 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc52b Unifying Receiver
bcdDevice 12.01
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 4 RQR12.01_B0019
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 148
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 98
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Device Status: 0x0000
(Bus Powered)

Maybe my "unifying" receiver isn't actually working as such a complex
device, and this state needs to be detected somehow?

--
2. That which causes joy or happiness.


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120912005910.GA31996@entuzijast.net">http://lists.debian.org/20120912005910.GA31996@entuzijast.net


All times are GMT. The time now is 07:41 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.