Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#684352: Wifi kill switch always on unless ACPI=off is used (http://www.linux-archive.org/debian-kernel/692107-bug-684352-wifi-kill-switch-always-unless-acpi-off-used.html)

David Smith 08-09-2012 03:19 AM

Bug#684352: Wifi kill switch always on unless ACPI=off is used
 
Package: linux-image-3.2.0-3-686-pae
Version: 3.2.21-3
Architecture: i386

Hardware: 6-year old laptop with Pentium-M CPU and Intel 2200 wireless.


This is a problem that just started happening after I updated to Wheezy.


When I boot my PC with the default Debian kernel for Wheezy and the ipw2x00 firmware package, I get a message saying my wireless killswitch is on. Pressing the "Wifi" button on my laptop and rebooting gives the same results.* I pressed the "Wifi" button and it doesn't light up like it did in "Squeeze" or "Lenny".* The button stays dark.


When I boot the kernel with ACPI=off, the "Wifi" button immediately starts slowly blinking right after grub indicating that the Wifi is on and waiting for me to specify a wireless network.* When it gets to my Desktop, I am easily able to connect to a Wifi network.*** I've tried half a dozen times to get Wifi working without having to use ACPI=off, but it just doesn't work anymore unless I use ACPI=off everytime I boot.




david@Miho:~$ dmesg | grep ipw
[*** 2.941208] libipw: 802.11 data/management/control stack, git-1.1.13
[*** 2.941211] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>

[*** 2.955322] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[*** 2.955325] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[*** 3.194528] ipw2200 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[*** 3.194550] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[*** 3.729545] ipw2200: Radio Frequency Kill Switch is On:
[*** 3.740907] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)

[** 11.992040] ipw2200: Failed to send POWER_MODE: Command timed out.

The above is the results I get in the log.* It says the Kill Switch is ON, but I know for a fact that it is not as I can just reboot and choose ACPI=off and it will work just fine.



david@Miho:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04)

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)

00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon Mobility X700 (PCIE)
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller

06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller

06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
david@Miho:~$


david@Miho:~$ dpkg -l | grep ipw
ii* firmware-ipw2x00**************************** 0.36*************************** Binary firmware for Intel Pro Wireless 2100, 2200 and 2915


david@Miho:/mnt/320GB/home/david$ dpkg -l | grep linux-image
ii* linux-image-3.2.0-3-686-pae***************** 3.2.21-3*********************** Linux 3.2 for modern PCs



Please excuse me if this is a firmware-ipw2x00 bug instead of a kernel bug, I really don't know where to put this.* Since setting ACPI=off in the boot options fixes it, I'm assuming it's a kernel bug.

Ben Hutchings 08-12-2012 10:11 PM

Bug#684352: Wifi kill switch always on unless ACPI=off is used
 
On Wed, 2012-08-08 at 23:19 -0400, David Smith wrote:
> Package: linux-image-3.2.0-3-686-pae
> Version: 3.2.21-3
> Architecture: i386
>
> Hardware: 6-year old laptop with Pentium-M CPU and Intel 2200
> wireless.
>
>
> This is a problem that just started happening after I updated to
> Wheezy.
>
> When I boot my PC with the default Debian kernel for Wheezy and the
> ipw2x00 firmware package, I get a message saying my wireless
> killswitch is on. Pressing the "Wifi" button on my laptop and
> rebooting gives the same results. I pressed the "Wifi" button and it
> doesn't light up like it did in "Squeeze" or "Lenny". The button
> stays dark.
>
> When I boot the kernel with ACPI=off, the "Wifi" button immediately
> starts slowly blinking right after grub indicating that the Wifi is on
> and waiting for me to specify a wireless network. When it gets to my
> Desktop, I am easily able to connect to a Wifi network. I've tried
> half a dozen times to get Wifi working without having to use ACPI=off,
> but it just doesn't work anymore unless I use ACPI=off everytime I
> boot.
[...]

Please provide the full boot messages (/var/log/dmesg) from the old and
new kernel versions.

Ben.

--
Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.

David Smith 08-14-2012 03:57 AM

Bug#684352: Wifi kill switch always on unless ACPI=off is used
 
Before, in Debian Lenny, the wireless button worked to turn the wireless on and off.** Now the wireless button doesn't seem to do anything and if I choose to boot with ACPI=off it seems to force the wireless to be enabled and without ACPI=off thee wireless is disabled.


Debian Wheezy dmesg with ACPI=off (Wireless button shows wireless is on and pressing the wireless button does not turn wireless on or off. Wireless works)

Miho:/home/david# dmesg
[*** 0.000000] Initializing cgroup subsys cpuset

[*** 0.000000] Initializing cgroup subsys cpu
[*** 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012

[*** 0.000000] Disabled fast string operations
[*** 0.000000] BIOS-provided physical RAM map:
[*** 0.000000]* BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[*** 0.000000]* BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[*** 0.000000]* BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[*** 0.000000]* BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[*** 0.000000]* BIOS-e820: 000000007fee0000 - 000000007feeb000 (ACPI data)

[*** 0.000000]* BIOS-e820: 000000007feeb000 - 000000007ff00000 (ACPI NVS)
[*** 0.000000]* BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)

[*** 0.000000]* BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

[*** 0.000000] NX (Execute Disable) protection: active
[*** 0.000000] DMI present.
[*** 0.000000] DMI: Hewlett-Packard Pavilion dv4000 (x123xx#ABA)/309E, BIOS F.15 05/24/2006
[*** 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[*** 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[*** 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[*** 0.000000] MTRR default type: uncachable
[*** 0.000000] MTRR fixed ranges enabled:

[*** 0.000000]** 00000-9FFFF write-back
[*** 0.000000]** A0000-BFFFF uncachable
[*** 0.000000]** C0000-CFFFF write-protect
[*** 0.000000]** D0000-E3FFF uncachable
[*** 0.000000]** E4000-FFFFF write-protect

[*** 0.000000] MTRR variable ranges enabled:
[*** 0.000000]** 0 base 000000000 mask F80000000 write-back
[*** 0.000000]** 1 base 07FF00000 mask FFFF00000 uncachable
[*** 0.000000]** 2 disabled
[*** 0.000000]** 3 disabled

[*** 0.000000]** 4 disabled
[*** 0.000000]** 5 disabled
[*** 0.000000]** 6 disabled
[*** 0.000000]** 7 disabled
[*** 0.000000] PAT not supported by CPU.
[*** 0.000000] initial memory mapped : 0 - 01a00000

[*** 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[*** 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[*** 0.000000]* 0000000000 - 0000200000 page 4k
[*** 0.000000]* 0000200000 - 0037800000 page 2M

[*** 0.000000]* 0037800000 - 00379fe000 page 4k
[*** 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[*** 0.000000] RAMDISK: 36714000 - 37382000
[*** 0.000000] 1156MB HIGHMEM available.

[*** 0.000000] 889MB LOWMEM available.
[*** 0.000000]** mapped low ram: 0 - 379fe000
[*** 0.000000]** low ram: 0 - 379fe000
[*** 0.000000] Zone PFN ranges:
[*** 0.000000]** DMA***** 0x00000010 -> 0x00001000

[*** 0.000000]** Normal** 0x00001000 -> 0x000379fe
[*** 0.000000]** HighMem* 0x000379fe -> 0x0007fee0
[*** 0.000000] Movable zone start PFN for each node
[*** 0.000000] early_node_map[2] active PFN ranges

[*** 0.000000]**** 0: 0x00000010 -> 0x0000009f
[*** 0.000000]**** 0: 0x00000100 -> 0x0007fee0
[*** 0.000000] On node 0 totalpages: 523887
[*** 0.000000] free_area_init_node: node 0, pgdat c140d640, node_mem_map f5714200

[*** 0.000000]** DMA zone: 32 pages used for memmap
[*** 0.000000]** DMA zone: 0 pages reserved
[*** 0.000000]** DMA zone: 3951 pages, LIFO batch:0
[*** 0.000000]** Normal zone: 1748 pages used for memmap
[*** 0.000000]** Normal zone: 221994 pages, LIFO batch:31

[*** 0.000000]** HighMem zone: 2314 pages used for memmap
[*** 0.000000]** HighMem zone: 293848 pages, LIFO batch:31
[*** 0.000000] Using APIC driver default
[*** 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org

[*** 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[*** 0.000000] Found and enabled local APIC!
[*** 0.000000] nr_irqs_gsi: 16
[*** 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[*** 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[*** 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[*** 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)

[*** 0.000000] Booting paravirtualized kernel on bare hardware
[*** 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[*** 0.000000] PERCPU: Embedded 14 pages/cpu @f79e3000 s33280 r0 d24064 u57344

[*** 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[*** 0.000000] pcpu-alloc: [0] 0
[*** 0.000000] Built 1 zonelists in Zone order, mobility grouping on.* Total pages: 519793
[*** 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=7397b469-cdfc-4e8a-ae54-294d980fefb4 ro quiet libata.noacpi=1 noapic libata.force=UDMA/100 acpi=off

[*** 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[*** 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[*** 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[*** 0.000000] Initializing CPU#0
[*** 0.000000] Initializing HighMem for node 0 (000379fe:0007fee0)
[*** 0.000000] Memory: 2060324k/2096000k available (2836k kernel code, 35224k reserved, 1343k data, 412k init, 1184648k highmem)

[*** 0.000000] virtual kernel memory layout:
[*** 0.000000]**** fixmap* : 0xffd36000 - 0xfffff000** (2852 kB)
[*** 0.000000]**** pkmap** : 0xffa00000 - 0xffc00000** (2048 kB)
[*** 0.000000]**** vmalloc : 0xf81fe000 - 0xff9fe000** ( 120 MB)

[*** 0.000000]**** lowmem* : 0xc0000000 - 0xf79fe000** ( 889 MB)
[*** 0.000000]****** .init : 0xc1415000 - 0xc147c000** ( 412 kB)
[*** 0.000000]****** .data : 0xc12c50ec - 0xc1414f00** (1343 kB)
[*** 0.000000]****** .text : 0xc1000000 - 0xc12c50ec** (2836 kB)

[*** 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[*** 0.000000] Hierarchical RCU implementation.
[*** 0.000000]* RCU dyntick-idle grace-period acceleration is enabled.
[*** 0.000000] NR_IRQS:2304 nr_irqs:256 16

[*** 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[*** 0.000000] Console: colour VGA+ 80x25
[*** 0.000000] console [tty0] enabled
[*** 0.000000] Fast TSC calibration using PIT
[*** 0.000000] Detected 1995.738 MHz processor.

[*** 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.47 BogoMIPS (lpj=7982952)
[*** 0.008008] pid_max: default: 32768 minimum: 301
[*** 0.008056] Security Framework initialized

[*** 0.008065] AppArmor: AppArmor disabled by boot time parameter
[*** 0.008082] Mount-cache hash table entries: 512
[*** 0.008241] Initializing cgroup subsys cpuacct
[*** 0.008248] Initializing cgroup subsys memory

[*** 0.008258] Initializing cgroup subsys devices
[*** 0.008261] Initializing cgroup subsys freezer
[*** 0.008264] Initializing cgroup subsys net_cls
[*** 0.008266] Initializing cgroup subsys blkio
[*** 0.008275] Initializing cgroup subsys perf_event

[*** 0.008306] Disabled fast string operations
[*** 0.008316] mce: CPU supports 5 MCE banks
[*** 0.008325] CPU0: Thermal monitoring enabled (TM2)
[*** 0.008388] SMP alternatives: switching to UP code
[*** 0.012384] Freeing SMP alternatives: 8k freed

[*** 0.012444] weird, boot CPU (#0) not listed by the BIOS.
[*** 0.012446] SMP motherboard not detected.
[*** 0.012451] Enabling APIC mode:* Flat.* Using 0 I/O APICs
[*** 0.120021] SMP disabled
[*** 0.120023] Performance Events: p6 PMU driver.

[*** 0.120029] ... version:*************** 0
[*** 0.120031] ... bit width:************* 32
[*** 0.120033] ... generic registers:***** 2
[*** 0.120035] ... value mask:************ 00000000ffffffff
[*** 0.120037] ... max period:************ 000000007fffffff

[*** 0.120039] ... fixed-purpose events:** 0
[*** 0.120041] ... event mask:************ 0000000000000003
[*** 0.120264] NMI watchdog enabled, takes one hw-pmu counter.
[*** 0.120291] Brought up 1 CPUs
[*** 0.120293] Total of 1 processors activated (3991.47 BogoMIPS).

[*** 0.120465] devtmpfs: initialized
[*** 0.120659] PM: Registering ACPI NVS region at 7feeb000 (86016 bytes)
[*** 0.120850] print_constraints: dummy:
[*** 0.120908] NET: Registered protocol family 16
[*** 0.121504] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.

[*** 0.121509] PCI: PCI BIOS revision 2.10 entry at 0xfd860, last bus=7
[*** 0.121511] PCI: Using configuration type 1 for base access
[*** 0.122217] bio: create slab <bio-0> at 0
[*** 0.122283] ACPI: Interpreter disabled.

[*** 0.122356] vgaarb: loaded
[*** 0.122396] PCI: Probing PCI hardware
[*** 0.122399] PCI: Probing PCI hardware (bus 00)
[*** 0.122443] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[*** 0.122488] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604

[*** 0.122528] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[*** 0.122533] pci 0000:00:01.0: PME# disabled
[*** 0.122586] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[*** 0.122686] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[*** 0.122691] pci 0000:00:1c.0: PME# disabled
[*** 0.122723] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[*** 0.122778] pci 0000:00:1d.0: reg 20: [io* 0x1800-0x181f]
[*** 0.122818] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03

[*** 0.122870] pci 0000:00:1d.1: reg 20: [io* 0x1820-0x183f]
[*** 0.122911] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[*** 0.122963] pci 0000:00:1d.2: reg 20: [io* 0x1840-0x185f]
[*** 0.123003] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03

[*** 0.123055] pci 0000:00:1d.3: reg 20: [io* 0x1860-0x187f]
[*** 0.123106] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[*** 0.123129] pci 0000:00:1d.7: reg 10: [mem 0xc8000000-0xc80003ff]
[*** 0.123227] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[*** 0.123233] pci 0000:00:1d.7: PME# disabled
[*** 0.123255] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[*** 0.123345] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
[*** 0.123365] pci 0000:00:1e.2: reg 10: [io* 0x1c00-0x1cff]

[*** 0.123376] pci 0000:00:1e.2: reg 14: [io* 0x1880-0x18bf]
[*** 0.123388] pci 0000:00:1e.2: reg 18: [mem 0xc8000800-0xc80009ff]
[*** 0.123400] pci 0000:00:1e.2: reg 1c: [mem 0xc8000400-0xc80004ff]
[*** 0.123459] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold

[*** 0.123464] pci 0000:00:1e.2: PME# disabled
[*** 0.123484] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
[*** 0.123503] pci 0000:00:1e.3: reg 10: [io* 0x2400-0x24ff]
[*** 0.123515] pci 0000:00:1e.3: reg 14: [io* 0x2000-0x207f]

[*** 0.123593] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[*** 0.123598] pci 0000:00:1e.3: PME# disabled
[*** 0.123621] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[*** 0.123733] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000

[*** 0.123742] pci 0000:00:1f.0: quirk: [io* 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[*** 0.123749] pci 0000:00:1f.0: quirk: [io* 0x1180-0x11bf] claimed by ICH6 GPIO
[*** 0.123774] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101

[*** 0.123790] pci 0000:00:1f.1: reg 10: [io* 0x0000-0x0007]
[*** 0.123802] pci 0000:00:1f.1: reg 14: [io* 0x0000-0x0003]
[*** 0.123814] pci 0000:00:1f.1: reg 18: [io* 0x0000-0x0007]
[*** 0.123825] pci 0000:00:1f.1: reg 1c: [io* 0x0000-0x0003]

[*** 0.123837] pci 0000:00:1f.1: reg 20: [io* 0x18c0-0x18cf]
[*** 0.123883] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[*** 0.123952] pci 0000:00:1f.3: reg 20: [io* 0x18e0-0x18ff]
[*** 0.124026] pci 0000:01:00.0: [1002:5653] type 0 class 0x000300

[*** 0.124037] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[*** 0.124045] pci 0000:01:00.0: reg 14: [io* 0x3000-0x30ff]
[*** 0.124053] pci 0000:01:00.0: reg 18: [mem 0xc8100000-0xc810ffff]
[*** 0.124077] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[*** 0.124106] pci 0000:01:00.0: supports D1 D2
[*** 0.124115] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.* You can enable it with 'pcie_aspm=force'
[*** 0.124124] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[*** 0.124128] pci 0000:00:01.0:** bridge window [io* 0x3000-0x3fff]
[*** 0.124132] pci 0000:00:01.0:** bridge window [mem 0xc8100000-0xc81fffff]
[*** 0.124136] pci 0000:00:01.0:** bridge window [mem 0xd0000000-0xd7ffffff pref]

[*** 0.124192] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[*** 0.124257] pci 0000:06:05.0: [8086:4220] type 0 class 0x000280
[*** 0.124285] pci 0000:06:05.0: reg 10: [mem 0xc8206000-0xc8206fff]
[*** 0.124411] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold

[*** 0.124417] pci 0000:06:05.0: PME# disabled
[*** 0.124443] pci 0000:06:06.0: [104c:8031] type 2 class 0x000607
[*** 0.124471] pci 0000:06:06.0: reg 10: [mem 0xc8207000-0xc8207fff]
[*** 0.124514] pci 0000:06:06.0: supports D1 D2

[*** 0.124517] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[*** 0.124524] pci 0000:06:06.0: PME# disabled
[*** 0.124552] pci 0000:06:06.2: [104c:8032] type 0 class 0x000c00
[*** 0.124579] pci 0000:06:06.2: reg 10: [mem 0xc8208000-0xc82087ff]

[*** 0.124596] pci 0000:06:06.2: reg 14: [mem 0xc8200000-0xc8203fff]
[*** 0.124708] pci 0000:06:06.2: supports D1 D2
[*** 0.124711] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
[*** 0.124717] pci 0000:06:06.2: PME# disabled

[*** 0.124743] pci 0000:06:06.3: [104c:8033] type 0 class 0x000180
[*** 0.124770] pci 0000:06:06.3: reg 10: [mem 0xc8204000-0xc8205fff]
[*** 0.124892] pci 0000:06:06.3: supports D1 D2
[*** 0.124894] pci 0000:06:06.3: PME# supported from D0 D1 D2 D3hot

[*** 0.124901] pci 0000:06:06.3: PME# disabled
[*** 0.124927] pci 0000:06:06.4: [104c:8034] type 0 class 0x000805
[*** 0.124955] pci 0000:06:06.4: reg 10: [mem 0xc8209000-0xc82090ff]
[*** 0.124971] pci 0000:06:06.4: reg 14: [mem 0xc8208c00-0xc8208cff]

[*** 0.124987] pci 0000:06:06.4: reg 18: [mem 0xc8208800-0xc82088ff]
[*** 0.125082] pci 0000:06:06.4: supports D1 D2
[*** 0.125084] pci 0000:06:06.4: PME# supported from D0 D1 D2 D3hot
[*** 0.125091] pci 0000:06:06.4: PME# disabled

[*** 0.125122] pci 0000:06:07.0: [10ec:8139] type 0 class 0x000200
[*** 0.125149] pci 0000:06:07.0: reg 10: [io* 0x4000-0x40ff]
[*** 0.125166] pci 0000:06:07.0: reg 14: [mem 0xc8209400-0xc82094ff]
[*** 0.125275] pci 0000:06:07.0: supports D1 D2

[*** 0.125278] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
[*** 0.125284] pci 0000:06:07.0: PME# disabled
[*** 0.125337] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[*** 0.125342] pci 0000:00:1e.0:** bridge window [io* 0x4000-0x4fff]

[*** 0.125347] pci 0000:00:1e.0:** bridge window [mem 0xc8200000-0xc82fffff]
[*** 0.125356] pci 0000:00:1e.0:** bridge window [io* 0x0000-0xffff] (subtractive decode)
[*** 0.125359] pci 0000:00:1e.0:** bridge window [mem 0x00000000-0xffffffff] (subtractive decode)

[*** 0.125414] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[*** 0.125898] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[*** 0.126465] PCI: pci_cache_line_size set to 64 bytes

[*** 0.126552] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[*** 0.126555] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
[*** 0.126795] hpet clockevent registered
[*** 0.126801] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[*** 0.126808] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[*** 0.126813] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[*** 0.132048] Switching to clocksource hpet
[*** 0.134010] pnp: PnP ACPI: disabled
[*** 0.134015] PnPBIOS: Scanning system for PnP BIOS support...

[*** 0.134034] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7790
[*** 0.134037] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfeb, dseg 0x400
[*** 0.134113] pnp 00:00: [io* 0x04d0-0x04d1]
[*** 0.134116] pnp 00:00: [io* 0x1000-0x105f]

[*** 0.134119] pnp 00:00: [io* 0x1060-0x107f]
[*** 0.134121] pnp 00:00: [io* 0x1180-0x11bf]
[*** 0.134124] pnp 00:00: [mem 0xfffffffffec00000-0xfffffffffec003ff]
[*** 0.134127] pnp 00:00: [mem 0xfffffffffec10000-0xfffffffffec17fff]

[*** 0.134130] pnp 00:00: [mem 0xfffffffffec18000-0xfffffffffec1ffff]
[*** 0.134133] pnp 00:00: [mem 0xfffffffffec20000-0xfffffffffec27fff]
[*** 0.134136] pnp 00:00: [mem 0xfffffffffec28000-0xfffffffffec2ffff]
[*** 0.134139] pnp 00:00: [mem 0xfffffffffed00000-0xfffffffffed033ff]

[*** 0.134142] pnp 00:00: [mem 0xfffffffffed20000-0xfffffffffed8ffff]
[*** 0.134145] pnp 00:00: [mem 0xfffffffff0008000-0xfffffffff000bfff]
[*** 0.134166] pnp 00:00: disabling [io* 0x1000-0x105f] because it overlaps 0000:00:1f.0 BAR 13 [io* 0x1000-0x107f]

[*** 0.134170] pnp 00:00: disabling [io* 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io* 0x1000-0x107f]
[*** 0.134212] system 00:00: [io* 0x04d0-0x04d1] has been reserved
[*** 0.134216] system 00:00: [io* 0x1180-0x11bf] has been reserved

[*** 0.134220] system 00:00: [mem 0xfffffffffec00000-0xfffffffffec003ff] could not be reserved
[*** 0.134224] system 00:00: [mem 0xfffffffffec10000-0xfffffffffec17fff] could not be reserved
[*** 0.134227] system 00:00: [mem 0xfffffffffec18000-0xfffffffffec1ffff] could not be reserved

[*** 0.134231] system 00:00: [mem 0xfffffffffec20000-0xfffffffffec27fff] could not be reserved
[*** 0.134235] system 00:00: [mem 0xfffffffffec28000-0xfffffffffec2ffff] could not be reserved
[*** 0.134239] system 00:00: [mem 0xfffffffffed00000-0xfffffffffed033ff] could not be reserved

[*** 0.134243] system 00:00: [mem 0xfffffffffed20000-0xfffffffffed8ffff] could not be reserved
[*** 0.134247] system 00:00: [mem 0xfffffffff0008000-0xfffffffff000bfff] could not be reserved
[*** 0.134252] system 00:00: Plug and Play BIOS device, IDs PNP0c02 (active)

[*** 0.134260] pnp 00:01: [io* 0x0010-0x001f]
[*** 0.134262] pnp 00:01: [io* 0x0024-0x0025]
[*** 0.134265] pnp 00:01: [io* 0x0028-0x0029]
[*** 0.134267] pnp 00:01: [io* 0x002c-0x002d]
[*** 0.134270] pnp 00:01: [io* 0x0030-0x0031]

[*** 0.134272] pnp 00:01: [io* 0x0034-0x0035]
[*** 0.134275] pnp 00:01: [io* 0x0038-0x0039]
[*** 0.134277] pnp 00:01: [io* 0x003c-0x003d]
[*** 0.134279] pnp 00:01: [io* 0x004e-0x004f]
[*** 0.134282] pnp 00:01: [io* 0x0050-0x0053]

[*** 0.134284] pnp 00:01: [io* 0x0062]
[*** 0.134286] pnp 00:01: [io* 0x0066]
[*** 0.134289] pnp 00:01: [io* 0x0072-0x0073]
[*** 0.134291] pnp 00:01: [io* 0x0074-0x0075]
[*** 0.134294] pnp 00:01: [io* 0x0076-0x0077]

[*** 0.134296] pnp 00:01: [io* 0x0080]
[*** 0.134298] pnp 00:01: [io* 0x0090-0x0091]
[*** 0.134302] pnp 00:01: [io* 0x0092]
[*** 0.134304] pnp 00:01: [io* 0x0093-0x009f]
[*** 0.134307] pnp 00:01: [io* 0x00a4-0x00a5]

[*** 0.134309] pnp 00:01: [io* 0x00a8-0x00a9]
[*** 0.134312] pnp 00:01: [io* 0x00ac-0x00ad]
[*** 0.134314] pnp 00:01: [io* 0x00b0-0x00b1]
[*** 0.134316] pnp 00:01: [io* 0x00b2-0x00b3]
[*** 0.134319] pnp 00:01: [io* 0x00b4-0x00b5]

[*** 0.134321] pnp 00:01: [io* 0x00b8-0x00b9]
[*** 0.134324] pnp 00:01: [io* 0x00bc-0x00bd]
[*** 0.134326] pnp 00:01: [mem 0xffffffffffc00000-0xffffffffffffffff]
[*** 0.134329] pnp 00:01: [mem 0xffffffffe0000000-0xffffffffefffffff]

[*** 0.134332] pnp 00:01: [mem 0xfffffffff0000000-0xfffffffff0003fff]
[*** 0.134335] pnp 00:01: [mem 0xfffffffff0004000-0xfffffffff0004fff]
[*** 0.134338] pnp 00:01: [mem 0xfffffffff0005000-0xfffffffff0005fff]
[*** 0.134418] system 00:01: [mem 0xffffffffffc00000-0xffffffffffffffff] could not be reserved

[*** 0.134422] system 00:01: [mem 0xffffffffe0000000-0xffffffffefffffff] could not be reserved
[*** 0.134426] system 00:01: [mem 0xfffffffff0000000-0xfffffffff0003fff] could not be reserved
[*** 0.134430] system 00:01: [mem 0xfffffffff0004000-0xfffffffff0004fff] could not be reserved

[*** 0.134434] system 00:01: [mem 0xfffffffff0005000-0xfffffffff0005fff] could not be reserved
[*** 0.134438] system 00:01: Plug and Play BIOS device, IDs PNP0c02 (active)
[*** 0.134445] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]

[*** 0.134448] pnp 00:02: [mem 0x000e4000-0x000fffff]
[*** 0.134451] pnp 00:02: [mem 0x00100000-0x7fefffff]
[*** 0.134488] system 00:02: Plug and Play BIOS device, IDs PNP0c01 (disabled)
[*** 0.134495] pnp 00:03: [io* 0x0000-0x000f]

[*** 0.134498] pnp 00:03: [io* 0x0081-0x008f]
[*** 0.134500] pnp 00:03: [io* 0x00c0-0x00df]
[*** 0.134503] pnp 00:03: [dma 4]
[*** 0.134526] pnp 00:03: Plug and Play BIOS device, IDs PNP0200 (active)
[*** 0.134532] pnp 00:04: [io* 0x0020-0x0021]

[*** 0.134535] pnp 00:04: [io* 0x00a0-0x00a1]
[*** 0.134537] pnp 00:04: [irq 2]
[*** 0.134559] pnp 00:04: Plug and Play BIOS device, IDs PNP0000 (active)
[*** 0.134565] pnp 00:05: [io* 0x0040-0x0043]
[*** 0.134567] pnp 00:05: [irq 0]

[*** 0.134590] pnp 00:05: Plug and Play BIOS device, IDs PNP0100 (active)
[*** 0.134597] pnp 00:06: [io* 0x0070-0x0071]
[*** 0.134599] pnp 00:06: [irq 8]
[*** 0.134621] pnp 00:06: Plug and Play BIOS device, IDs PNP0b00 (active)

[*** 0.134628] pnp 00:07: [io* 0x0060]
[*** 0.134630] pnp 00:07: [io* 0x0064]
[*** 0.134632] pnp 00:07: [irq 1]
[*** 0.134653] pnp 00:07: Plug and Play BIOS device, IDs PNP0303 (active)
[*** 0.134660] pnp 00:08: [io* 0x00f0-0x00ff]

[*** 0.134662] pnp 00:08: [irq 13]
[*** 0.134685] pnp 00:08: Plug and Play BIOS device, IDs PNP0c04 (active)
[*** 0.134691] pnp 00:09: [io* 0x0061]
[*** 0.134712] pnp 00:09: Plug and Play BIOS device, IDs PNP0800 (active)

[*** 0.134719] pnp 00:0a: [mem 0x000dc000-0x000dffff]
[*** 0.134758] system 00:0a: [mem 0x000dc000-0x000dffff] could not be reserved
[*** 0.134762] system 00:0a: Plug and Play BIOS device, IDs PNP0c02 (active)
[*** 0.134769] pnp 00:0b: [mem 0x000e0000-0x000e3fff]

[*** 0.134805] system 00:0b: [mem 0x000e0000-0x000e3fff] could not be reserved
[*** 0.134808] system 00:0b: Plug and Play BIOS device, IDs PNP0c02 (active)
[*** 0.134815] pnp 00:0c: [io* 0x0cf8-0x0cff]
[*** 0.134836] pnp 00:0c: Plug and Play BIOS device, IDs PNP0a03 (active)

[*** 0.134844] pnp 00:0d: [mem 0xffffffffff000000-0xffffffffffffffff]
[*** 0.134868] pnp 00:0d: Plug and Play BIOS device, IDs INT0800 (active)
[*** 0.134912] pnp 00:0e: [mem 0x000ce200-0x000ce7ff]
[*** 0.134914] pnp 00:0e: [mem 0x000cf800-0x000cffff]

[*** 0.134952] system 00:0e: [mem 0x000ce200-0x000ce7ff] has been reserved
[*** 0.134955] system 00:0e: [mem 0x000cf800-0x000cffff] has been reserved
[*** 0.134959] system 00:0e: Plug and Play BIOS device, IDs PNP0c02 (active)

[*** 0.135088] pnp 00:0f: [irq 12]
[*** 0.135114] pnp 00:0f: Plug and Play BIOS device, IDs PNP0f13 (active)
[*** 0.135119] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[*** 0.137269] PCI: max bus depth: 2 pci_try_num: 3

[*** 0.137310] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[*** 0.137315] pci 0000:00:1c.0: BAR 14: assigned [mem 0x84000000-0x841fffff]
[*** 0.137319] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]

[*** 0.137325] pci 0000:00:1c.0: BAR 13: assigned [io* 0x5000-0x5fff]
[*** 0.137329] pci 0000:01:00.0: BAR 6: assigned [mem 0xc8120000-0xc813ffff pref]
[*** 0.137333] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[*** 0.137336] pci 0000:00:01.0:** bridge window [io* 0x3000-0x3fff]

[*** 0.137341] pci 0000:00:01.0:** bridge window [mem 0xc8100000-0xc81fffff]
[*** 0.137345] pci 0000:00:01.0:** bridge window [mem 0xd0000000-0xd7ffffff pref]
[*** 0.137350] pci 0000:00:1c.0: PCI bridge to [bus 02-02]

[*** 0.137353] pci 0000:00:1c.0:** bridge window [io* 0x5000-0x5fff]
[*** 0.137360] pci 0000:00:1c.0:** bridge window [mem 0x84000000-0x841fffff]
[*** 0.137366] pci 0000:00:1c.0:** bridge window [mem 0x84200000-0x843fffff 64bit pref]

[*** 0.137378] pci 0000:06:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[*** 0.137381] pci 0000:06:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[*** 0.137385] pci 0000:06:06.0: BAR 14: assigned [io* 0x4400-0x44ff]

[*** 0.137388] pci 0000:06:06.0: BAR 13: assigned [io* 0x4800-0x48ff]
[*** 0.137391] pci 0000:06:06.0: CardBus bridge to [bus 07-0a]
[*** 0.137394] pci 0000:06:06.0:** bridge window [io* 0x4800-0x48ff]
[*** 0.137399] pci 0000:06:06.0:** bridge window [io* 0x4400-0x44ff]

[*** 0.137406] pci 0000:06:06.0:** bridge window [mem 0x80000000-0x83ffffff pref]
[*** 0.137413] pci 0000:06:06.0:** bridge window [mem 0x88000000-0x8bffffff]
[*** 0.137419] pci 0000:00:1e.0: PCI bridge to [bus 06-07]

[*** 0.137423] pci 0000:00:1e.0:** bridge window [io* 0x4000-0x4fff]
[*** 0.137430] pci 0000:00:1e.0:** bridge window [mem 0xc8200000-0xc82fffff]
[*** 0.137435] pci 0000:00:1e.0:** bridge window [mem 0x80000000-0x83ffffff pref]

[*** 0.137450] pci 0000:00:01.0: setting latency timer to 64
[*** 0.137461] pci 0000:00:1c.0: setting latency timer to 64
[*** 0.137470] pci 0000:00:1e.0: setting latency timer to 64
[*** 0.137487] pci 0000:06:06.0: setting latency timer to 64

[*** 0.137492] pci_bus 0000:00: resource 0 [io* 0x0000-0xffff]
[*** 0.137495] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[*** 0.137498] pci_bus 0000:01: resource 0 [io* 0x3000-0x3fff]
[*** 0.137501] pci_bus 0000:01: resource 1 [mem 0xc8100000-0xc81fffff]

[*** 0.137504] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[*** 0.137506] pci_bus 0000:02: resource 0 [io* 0x5000-0x5fff]
[*** 0.137509] pci_bus 0000:02: resource 1 [mem 0x84000000-0x841fffff]
[*** 0.137512] pci_bus 0000:02: resource 2 [mem 0x84200000-0x843fffff 64bit pref]

[*** 0.137516] pci_bus 0000:06: resource 0 [io* 0x4000-0x4fff]
[*** 0.137518] pci_bus 0000:06: resource 1 [mem 0xc8200000-0xc82fffff]
[*** 0.137521] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[*** 0.137524] pci_bus 0000:06: resource 4 [io* 0x0000-0xffff]

[*** 0.137527] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[*** 0.137530] pci_bus 0000:07: resource 0 [io* 0x4800-0x48ff]
[*** 0.137533] pci_bus 0000:07: resource 1 [io* 0x4400-0x44ff]
[*** 0.137536] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]

[*** 0.137538] pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
[*** 0.137580] NET: Registered protocol family 2
[*** 0.137649] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[*** 0.137896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[*** 0.138888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[*** 0.139517] TCP: Hash tables configured (established 131072 bind 65536)
[*** 0.139520] TCP reno registered
[*** 0.139525] UDP hash table entries: 512 (order: 2, 16384 bytes)

[*** 0.139548] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[*** 0.139695] NET: Registered protocol family 1
[*** 0.139875] pci 0000:01:00.0: Boot video device
[*** 0.139900] PCI: CLS 32 bytes, default 64

[*** 0.139987] Unpacking initramfs...
[*** 0.561570] Freeing initrd memory: 12728k freed
[*** 0.572305] audit: initializing netlink socket (disabled)
[*** 0.572322] type=2000 audit(1344915690.572:1): initialized

[*** 0.597459] highmem bounce pool size: 64 pages
[*** 0.597467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[*** 0.609567] VFS: Disk quotas dquot_6.5.2
[*** 0.609606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[*** 0.609687] msgmni has been set to 1735
[*** 0.609856] alg: No test for stdrng (krng)
[*** 0.609885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[*** 0.609889] io scheduler noop registered

[*** 0.609891] io scheduler deadline registered
[*** 0.609898] io scheduler cfq registered (default)
[*** 0.610020] pcieport 0000:00:1c.0: setting latency timer to 64
[*** 0.610078] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X

[*** 0.610191] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[*** 0.610232] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2660 ss_vid 103c ss_did 309d
[*** 0.610274] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded

[*** 0.610283] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[*** 0.610285] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[*** 0.610378] intel_idle: does not run on family 6 model 13
[*** 0.610416] isapnp: Scanning for PnP cards...

[*** 0.964584] isapnp: No Plug & Play device found
[*** 0.964650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[*** 0.965237] Linux agpgart interface v0.103
[*** 0.965538] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12

[*** 0.970203] i8042: Detected active multiplexing controller, rev 1.1
[*** 0.973626] serio: i8042 KBD port at 0x60,0x64 irq 1
[*** 0.973633] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[*** 0.973668] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[*** 0.973700] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[*** 0.973729] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[*** 0.973853] mousedev: PS/2 mouse device common for all mice
[*** 0.974000] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0

[*** 0.974025] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[*** 0.974038] cpuidle: using governor ladder
[*** 0.974040] cpuidle: using governor menu
[*** 0.974246] TCP cubic registered
[*** 0.974269] NET: Registered protocol family 10

[*** 0.974766] Mobile IPv6
[*** 0.974770] NET: Registered protocol family 17
[*** 0.974774] Registering the dns_resolver key type
[*** 0.974796] Using IPI No-Shortcut mode
[*** 0.974891] PM: Hibernation image not present or could not be loaded.

[*** 0.974900] registered taskstats version 1
[*** 0.981448] rtc_cmos 00:06: setting system clock to 2012-08-14 03:41:32 UTC (1344915692)
[*** 0.981503] Initializing network drop monitor service
[*** 0.981628] Freeing unused kernel memory: 412k freed

[*** 0.981822] Write protecting the kernel text: 2840k
[*** 0.981856] Write protecting the kernel read-only data: 1088k
[*** 0.981858] NX-protecting the kernel data: 3304k
[*** 0.995418] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[*** 0.995677] udevd[45]: starting version 175
[*** 1.019655] usbcore: registered new interface driver usbfs
[*** 1.019687] usbcore: registered new interface driver hub
[*** 1.061852] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

[*** 1.061881] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[*** 1.062288] 8139too: 8139too Fast Ethernet driver 0.9.28
[*** 1.063620] 8139too 0000:06:07.0: eth0: RealTek RTL8139 at 0x4000, 00:16:d3:92:ec:f6, IRQ 11

[*** 1.066651] sdhci: Secure Digital Host Controller Interface driver
[*** 1.066654] sdhci: Copyright(c) Pierre Ossman
[*** 1.066927] sdhci-pci 0000:06:06.4: SDHCI controller found [104c:8034] (rev 0)
[*** 1.066981] mmc0: no vmmc regulator found

[*** 1.067015] Registered led device: mmc0::
[*** 1.071861] SCSI subsystem initialized
[*** 1.097658] usbcore: registered new device driver usb
[*** 1.098172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[*** 1.098224] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[*** 1.098229] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[*** 1.098256] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[*** 1.098287] ehci_hcd 0000:00:1d.7: debug port 1

[*** 1.102191] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[*** 1.116062] mmc0: SDHCI controller on PCI [0000:06:06.4] using PIO
[*** 1.116104] mmc1: no vmmc regulator found
[*** 1.116143] Registered led device: mmc1::

[*** 1.117265] uhci_hcd: USB Universal Host Controller Interface driver
[*** 1.117300] mmc1: SDHCI controller on PCI [0000:06:06.4] using PIO
[*** 1.117321] mmc2: no vmmc regulator found
[*** 1.117350] Registered led device: mmc2::

[*** 1.123858] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8000000
[*** 1.130585] mmc2: SDHCI controller on PCI [0000:06:06.4] using PIO
[*** 1.133524] libata version 3.00 loaded.
[*** 1.139503] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[*** 1.139567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[*** 1.139571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[*** 1.139574] usb usb1: Product: EHCI Host Controller

[*** 1.139576] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[*** 1.139579] usb usb1: SerialNumber: 0000:00:1d.7
[*** 1.140152] hub 1-0:1.0: USB hub found
[*** 1.140158] hub 1-0:1.0: 8 ports detected

[*** 1.140274] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[*** 1.140279] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[*** 1.140288] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[*** 1.140317] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800

[*** 1.140353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[*** 1.140356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[*** 1.140359] usb usb2: Product: UHCI Host Controller

[*** 1.140361] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[*** 1.140364] usb usb2: SerialNumber: 0000:00:1d.0
[*** 1.140472] hub 2-0:1.0: USB hub found
[*** 1.140477] hub 2-0:1.0: 2 ports detected

[*** 1.140555] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[*** 1.140559] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[*** 1.140567] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[*** 1.140597] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820

[*** 1.140631] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[*** 1.140634] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[*** 1.140637] usb usb3: Product: UHCI Host Controller

[*** 1.140639] usb usb3: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[*** 1.140642] usb usb3: SerialNumber: 0000:00:1d.1
[*** 1.140752] hub 3-0:1.0: USB hub found
[*** 1.140756] hub 3-0:1.0: 2 ports detected

[*** 1.140832] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[*** 1.140836] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[*** 1.140845] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[*** 1.140871] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840

[*** 1.140906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[*** 1.140909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[*** 1.140912] usb usb4: Product: UHCI Host Controller

[*** 1.140914] usb usb4: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[*** 1.140917] usb usb4: SerialNumber: 0000:00:1d.2
[*** 1.141033] hub 4-0:1.0: USB hub found
[*** 1.141037] hub 4-0:1.0: 2 ports detected

[*** 1.141113] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[*** 1.141117] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[*** 1.141124] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[*** 1.141150] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001860

[*** 1.141185] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[*** 1.141188] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[*** 1.141191] usb usb5: Product: UHCI Host Controller

[*** 1.141193] usb usb5: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[*** 1.141196] usb usb5: SerialNumber: 0000:00:1d.3
[*** 1.141302] hub 5-0:1.0: USB hub found
[*** 1.141306] hub 5-0:1.0: 2 ports detected

[*** 1.141639] ata_piix 0000:00:1f.1: version 2.13
[*** 1.141686] ata_piix 0000:00:1f.1: setting latency timer to 64
[*** 1.145636] scsi0 : ata_piix
[*** 1.151514] scsi1 : ata_piix
[*** 1.151585] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14

[*** 1.151589] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[*** 1.162670] ata2: port disabled--ignoring
[*** 1.184095] firewire_ohci: Added fw-ohci device 0000:06:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2

[*** 1.328527] ata1.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[*** 1.328531] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/1)
[*** 1.355779] ata1.01: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100

[*** 1.355783] ata1.01: 625142448 sectors, multi 16: LBA48
[*** 1.355789] ata1.00: FORCE: xfer_mask set to udma/100
[*** 1.355792] ata1.01: FORCE: xfer_mask set to udma/100
[*** 1.369315] ata1.00: configured for UDMA/100

[*** 1.385012] ata1.01: configured for UDMA/100
[*** 1.385140] scsi 0:0:0:0: Direct-Access**** ATA***** INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[*** 1.385456] scsi 0:0:1:0: Direct-Access**** ATA***** WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5

[*** 1.392657] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[*** 1.394138] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[*** 1.394211] sd 0:0:0:0: [sda] Write Protect is off

[*** 1.394214] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[*** 1.394238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[*** 1.395001] sd 0:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[*** 1.395054] sd 0:0:1:0: [sdb] Write Protect is off
[*** 1.395057] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[*** 1.395080] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[*** 1.395450]* sda: sda1
[*** 1.430298]* sdb: sdb1 sdb2 < sdb5 >
[*** 1.430503] sd 0:0:0:0: [sda] Attached SCSI disk
[*** 1.430823] sd 0:0:1:0: [sdb] Attached SCSI disk
[*** 1.568025] Refined TSC clocksource calibration: 1995.596 MHz.

[*** 1.568032] Switching to clocksource tsc
[*** 1.592497] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[*** 1.636012] usb 2-2: new low-speed USB device number 2 using uhci_hcd

[*** 1.684098] firewire_core: created device fw0: GUID 07e40a0093985009, S400
[*** 1.792469] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[*** 1.814383] usb 2-2: New USB device found, idVendor=03f0, idProduct=041d

[*** 1.814386] usb 2-2: New USB device strings: Mfr=6, Product=1, SerialNumber=0
[*** 1.814389] usb 2-2: Product: HP USB Travel Mouse
[*** 1.814392] usb 2-2: Manufacturer: Hewlett-Packard
[*** 1.833794] input: Hewlett-Packard HP USB Travel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1

[*** 1.833939] generic-usb 0003:03F0:041D.0001: input,hidraw0: USB HID v1.10 Mouse [Hewlett-Packard HP USB Travel Mouse] on usb-0000:00:1d.0-2/input0
[*** 1.834094] usbcore: registered new interface driver usbhid
[*** 1.834097] usbhid: USB HID core driver

[*** 1.992460] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[*** 2.234475] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[*** 2.286520] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6

[*** 2.286572] ata1.00: BMDMA stat 0x65
[*** 2.286618] ata1.00: failed command: READ DMA
[*** 2.286667] ata1.00: cmd c8/00:90:40:a2:0a/00:00:00:00:00/e0 tag 0 dma 73728 in
[*** 2.286668]********* res 51/84:0f:c1:a2:0a/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)

[*** 2.286760] ata1.00: status: { DRDY ERR }
[*** 2.286804] ata1.00: error: { ICRC ABRT }
[*** 2.286893] ata1: soft resetting link
[*** 2.480520] ata1.00: FORCE: xfer_mask set to udma/100
[*** 2.480523] ata1.01: FORCE: xfer_mask set to udma/100

[*** 2.496399] ata1.00: configured for UDMA/100
[*** 2.505254] ata1.01: configured for UDMA/100
[*** 2.505262] ata1: EH complete
[*** 2.735628] udevd[251]: starting version 175
[*** 2.886195] intel_rng: FWH not detected

[*** 2.889613] iTCO_vendor_support: vendor-support=0
[*** 2.894001] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[*** 2.894099] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[*** 2.894162] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[*** 2.894604] input: PC Speaker as /devices/platform/pcspkr/input/input2
[*** 2.961484] yenta_cardbus 0000:06:06.0: CardBus bridge found [103c:309d]
[*** 2.961510] yenta_cardbus 0000:06:06.0: Enabling burst memory read transactions

[*** 2.961516] yenta_cardbus 0000:06:06.0: Using CSCINT to route CSC interrupts to PCI
[*** 2.961519] yenta_cardbus 0000:06:06.0: Routing CardBus interrupts to PCI
[*** 2.961526] yenta_cardbus 0000:06:06.0: TI: mfunc 0x01aa1b02, devctl 0x64

[*** 2.982554] [drm] Initialized drm 1.1.0 20060810
[*** 2.995530] cfg80211: Calling CRDA to update world regulatory domain
[*** 3.007848] lib80211: common routines for IEEE802.11 drivers
[*** 3.007851] lib80211_crypt: registered algorithm 'NULL'

[*** 3.009772] libipw: 802.11 data/management/control stack, git-1.1.13
[*** 3.009775] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>

[*** 3.015988] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[*** 3.015992] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[*** 3.101875] [drm] radeon kernel modesetting enabled.
[*** 3.101969] radeon 0000:01:00.0: setting latency timer to 64

[*** 3.102205] [drm] initializing kernel modesetting (RV410 0x1002:0x5653 0x103C:0x309E).
[*** 3.102226] [drm] register mmio base: 0xC8100000
[*** 3.102228] [drm] register mmio size: 65536
[*** 3.102413] ATOM BIOS: HP

[*** 3.102435] [drm] Generation 2 PCI interface, using max accessible memory
[*** 3.102441] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[*** 3.102445] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF

[*** 3.102465] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[*** 3.102467] [drm] Driver supports precise vblank timestamp query.
[*** 3.102507] radeon 0000:01:00.0: irq 17 for MSI/MSI-X
[*** 3.102513] radeon 0000:01:00.0: radeon: using MSI.

[*** 3.102537] [drm] radeon: irq initialized.
[*** 3.103252] [drm] Detected VRAM RAM=128M, BAR=128M
[*** 3.103255] [drm] RAM width 128bits DDR
[*** 3.104439] [TTM] Zone* kernel: Available graphics memory: 444412 kiB.

[*** 3.104442] [TTM] Zone highmem: Available graphics memory: 1036736 kiB.
[*** 3.104444] [TTM] Initializing pool allocator.
[*** 3.104469] [drm] radeon: 128M of VRAM memory ready
[*** 3.104472] [drm] radeon: 512M of GTT memory ready.

[*** 3.104488] [drm] GART: num cpu pages 131072, num gpu pages 131072
[*** 3.106918] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[*** 3.106928] [drm] radeon: 2 quad pipes, 1 z pipes initialized.

[*** 3.106957] radeon 0000:01:00.0: WB enabled
[*** 3.107636] [drm] Loading R400 Microcode
[*** 3.176479] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[*** 3.192879] yenta_cardbus 0000:06:06.0: ISA IRQ mask 0x02f8, PCI irq 10

[*** 3.192884] yenta_cardbus 0000:06:06.0: Socket status: 30000006
[*** 3.192889] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[*** 3.192899] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [io* 0x4000-0x4fff]

[*** 3.192903] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff
[*** 3.198761] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0xc8200000-0xc82fffff]

[*** 3.198766] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8200000-0xc82fffff: excluding 0xc8200000-0xc820ffff
[*** 3.198785] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]

[*** 3.198789] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[*** 3.199903] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[*** 3.245845] [drm] radeon: ring at 0x00000000B0001000

[*** 3.245866] [drm] ring test succeeded in 1 usecs
[*** 3.246001] [drm] radeon: ib pool ready.
[*** 3.246751] [drm] ib test succeeded in 0 usecs
[*** 3.247041] [drm] Radeon Display Connectors
[*** 3.247044] [drm] Connector 0:

[*** 3.247045] [drm]** VGA
[*** 3.247048] [drm]** DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[*** 3.247050] [drm]** Encoders:
[*** 3.247052] [drm]**** CRT1: INTERNAL_DAC1
[*** 3.247054] [drm] Connector 1:

[*** 3.247055] [drm]** LVDS
[*** 3.247058] [drm]** DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[*** 3.247060] [drm]** Encoders:
[*** 3.247061] [drm]**** LCD1: INTERNAL_LVDS
[*** 3.247063] [drm] Connector 2:

[*** 3.247065] [drm]** S-video
[*** 3.247066] [drm]** Encoders:
[*** 3.247068] [drm]**** TV1: INTERNAL_DAC2
[*** 3.247083] [drm] radeon: power management initialized
[*** 3.545209] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.

[*** 3.672649] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x377
[*** 3.674479] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7

[*** 3.675248] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[*** 3.675880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[*** 3.750564] cfg80211: World regulatory domain updated:

[*** 3.750567] cfg80211:**** (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[*** 3.750571] cfg80211:**** (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[*** 3.750574] cfg80211:**** (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[*** 3.750578] cfg80211:**** (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[*** 3.750581] cfg80211:**** (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[*** 3.750584] cfg80211:**** (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[*** 3.757822]* clean.
[*** 3.757868] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[*** 3.757902] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.

[*** 3.757936] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[*** 3.757968] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[*** 3.764634] cfg80211: failed to add phy80211 symlink to netdev!

[*** 3.764849] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[*** 3.776519] snd_intel8x0m 0000:00:1e.3: setting latency timer to 64
[*** 3.784804] snd_intel8x0 0000:00:1e.2: setting latency timer to 64

[*** 3.874625] [drm] fb mappable at 0xD00C0000
[*** 3.874629] [drm] vram apper at 0xD0000000
[*** 3.874631] [drm] size 4096000
[*** 3.874632] [drm] fb depth is 24
[*** 3.874634] [drm]*** pitch is 5120
[*** 3.874751] fbcon: radeondrmfb (fb0) is primary device

[*** 4.414835] Console: switching to colour frame buffer device 160x50
[*** 4.420449] fb0: radeondrmfb frame buffer device
[*** 4.420451] drm: registered panic notifier
[*** 4.420866] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0

[*** 4.800013] intel8x0_measure_ac97_clock: measured 55459 usecs (2672 samples)
[*** 4.800016] intel8x0: clocking to 48000
[*** 4.904625] Adding 2650688k swap on /dev/sdb5.* Priority:-1 extents:1 across:2650688k

[*** 4.917452] EXT4-fs (sda1): re-mounted. Opts: (null)
[*** 4.957068] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[*** 4.968149] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input3

[*** 4.986361] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input4
[*** 4.999300] loop: module loaded
[*** 5.926362] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro

[*** 6.194631] RPC: Registered named UNIX socket transport module.
[*** 6.194635] RPC: Registered udp transport module.
[*** 6.194637] RPC: Registered tcp transport module.
[*** 6.194639] RPC: Registered tcp NFSv4.1 backchannel transport module.

[*** 6.202882] FS-Cache: Loaded
[*** 6.219785] FS-Cache: Netfs 'nfs' registered for caching
[*** 6.228590] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[*** 6.932183] 8139too 0000:06:07.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1



Debian Wheezy dmesg (Wireless button shows wireless is off and pressing the button does not turn wireless on or off. Wireless doesn't work)

[*** 0.000000] Initializing cgroup subsys cpuset
[*** 0.000000] Initializing cgroup subsys cpu

[*** 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012

[*** 0.000000] Disabled fast string operations
[*** 0.000000] BIOS-provided physical RAM map:
[*** 0.000000]* BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[*** 0.000000]* BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[*** 0.000000]* BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[*** 0.000000]* BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[*** 0.000000]* BIOS-e820: 000000007fee0000 - 000000007feeb000 (ACPI data)

[*** 0.000000]* BIOS-e820: 000000007feeb000 - 000000007ff00000 (ACPI NVS)
[*** 0.000000]* BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)

[*** 0.000000]* BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[*** 0.000000]* BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

[*** 0.000000] NX (Execute Disable) protection: active
[*** 0.000000] DMI present.
[*** 0.000000] DMI: Hewlett-Packard Pavilion dv4000 (x123xx#ABA)/309E, BIOS F.15 05/24/2006
[*** 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[*** 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[*** 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[*** 0.000000] MTRR default type: uncachable
[*** 0.000000] MTRR fixed ranges enabled:

[*** 0.000000]** 00000-9FFFF write-back
[*** 0.000000]** A0000-BFFFF uncachable
[*** 0.000000]** C0000-CFFFF write-protect
[*** 0.000000]** D0000-E3FFF uncachable
[*** 0.000000]** E4000-FFFFF write-protect

[*** 0.000000] MTRR variable ranges enabled:
[*** 0.000000]** 0 base 000000000 mask F80000000 write-back
[*** 0.000000]** 1 base 07FF00000 mask FFFF00000 uncachable
[*** 0.000000]** 2 disabled
[*** 0.000000]** 3 disabled

[*** 0.000000]** 4 disabled
[*** 0.000000]** 5 disabled
[*** 0.000000]** 6 disabled
[*** 0.000000]** 7 disabled
[*** 0.000000] PAT not supported by CPU.
[*** 0.000000] initial memory mapped : 0 - 01a00000

[*** 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[*** 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[*** 0.000000]* 0000000000 - 0000200000 page 4k
[*** 0.000000]* 0000200000 - 0037800000 page 2M

[*** 0.000000]* 0037800000 - 00379fe000 page 4k
[*** 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[*** 0.000000] RAMDISK: 36714000 - 37382000
[*** 0.000000] ACPI: RSDP 000f76a0 00014 (v00 HP*** )

[*** 0.000000] ACPI: RSDT 7fee51c1 00044 (v01 HP**** 309E**** 06040000* LTP 00000000)
[*** 0.000000] ACPI: FACP 7feeae88 00074 (v01 HP**** 309E**** 06040000 LOHR 0000005F)
[*** 0.000000] ACPI: DSDT 7fee5a66 05422 (v01 HP**** 309E**** 06040000 MSFT 0100000E)

[*** 0.000000] ACPI: FACS 7fefbfc0 00040
[*** 0.000000] ACPI: APIC 7feeaefc 00068 (v01 HP**** 309E**** 06040000 LOHR 0000005F)
[*** 0.000000] ACPI: BOOT 7feeafd8 00028 (v01 HP**** 309E**** 06040000* LTP 00000001)

[*** 0.000000] ACPI: MCFG 7feeaf9c 0003C (v01 HP**** 309E**** 06040000 LOHR 0000005F)
[*** 0.000000] ACPI: SSDT 7fee561d 00277 (v01 HP**** 309E**** 00003000 INTL 20030224)
[*** 0.000000] ACPI: SSDT 7fee5445 001D8 (v01 HP**** 309E**** 00003001 INTL 20030224)

[*** 0.000000] ACPI: SSDT 7fee5331 00114 (v01 HP**** 309E**** 00003000 INTL 20030224)
[*** 0.000000] ACPI: SSDT 7fee5205 0012C (v01 HP**** 309E**** 00000001 INTL 20030224)
[*** 0.000000] ACPI: Local APIC address 0xfee00000

[*** 0.000000] 1156MB HIGHMEM available.
[*** 0.000000] 889MB LOWMEM available.
[*** 0.000000]** mapped low ram: 0 - 379fe000
[*** 0.000000]** low ram: 0 - 379fe000
[*** 0.000000] Zone PFN ranges:
[*** 0.000000]** DMA***** 0x00000010 -> 0x00001000

[*** 0.000000]** Normal** 0x00001000 -> 0x000379fe
[*** 0.000000]** HighMem* 0x000379fe -> 0x0007fee0
[*** 0.000000] Movable zone start PFN for each node
[*** 0.000000] early_node_map[2] active PFN ranges

[*** 0.000000]**** 0: 0x00000010 -> 0x0000009f
[*** 0.000000]**** 0: 0x00000100 -> 0x0007fee0
[*** 0.000000] On node 0 totalpages: 523887
[*** 0.000000] free_area_init_node: node 0, pgdat c140d640, node_mem_map f5714200

[*** 0.000000]** DMA zone: 32 pages used for memmap
[*** 0.000000]** DMA zone: 0 pages reserved
[*** 0.000000]** DMA zone: 3951 pages, LIFO batch:0
[*** 0.000000]** Normal zone: 1748 pages used for memmap
[*** 0.000000]** Normal zone: 221994 pages, LIFO batch:31

[*** 0.000000]** HighMem zone: 2314 pages used for memmap
[*** 0.000000]** HighMem zone: 293848 pages, LIFO batch:31
[*** 0.000000] Using APIC driver default
[*** 0.000000] ACPI: PM-Timer IO Port: 0x1008
[*** 0.000000] ACPI: Local APIC address 0xfee00000

[*** 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[*** 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[*** 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[*** 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[*** 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[*** 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[*** 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[*** 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[*** 0.000000] ACPI: IRQ0 used by override.
[*** 0.000000] ACPI: IRQ2 used by override.
[*** 0.000000] ACPI: IRQ9 used by override.
[*** 0.000000] Using ACPI (MADT) for SMP configuration information

[*** 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[*** 0.000000] nr_irqs_gsi: 40
[*** 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[*** 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000

[*** 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[*** 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[*** 0.000000] Booting paravirtualized kernel on bare hardware

[*** 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[*** 0.000000] PERCPU: Embedded 14 pages/cpu @f79d5000 s33280 r0 d24064 u57344
[*** 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096

[*** 0.000000] pcpu-alloc: [0] 0 [0] 1
[*** 0.000000] Built 1 zonelists in Zone order, mobility grouping on.* Total pages: 519793
[*** 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=7397b469-cdfc-4e8a-ae54-294d980fefb4 ro quiet

[*** 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[*** 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[*** 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[*** 0.000000] Initializing CPU#0
[*** 0.000000] Initializing HighMem for node 0 (000379fe:0007fee0)
[*** 0.000000] Memory: 2060268k/2096000k available (2836k kernel code, 35280k reserved, 1343k data, 412k init, 1184648k highmem)

[*** 0.000000] virtual kernel memory layout:
[*** 0.000000]**** fixmap* : 0xffd36000 - 0xfffff000** (2852 kB)
[*** 0.000000]**** pkmap** : 0xffa00000 - 0xffc00000** (2048 kB)
[*** 0.000000]**** vmalloc : 0xf81fe000 - 0xff9fe000** ( 120 MB)

[*** 0.000000]**** lowmem* : 0xc0000000 - 0xf79fe000** ( 889 MB)
[*** 0.000000]****** .init : 0xc1415000 - 0xc147c000** ( 412 kB)
[*** 0.000000]****** .data : 0xc12c50ec - 0xc1414f00** (1343 kB)
[*** 0.000000]****** .text : 0xc1000000 - 0xc12c50ec** (2836 kB)

[*** 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[*** 0.000000] Hierarchical RCU implementation.
[*** 0.000000]* RCU dyntick-idle grace-period acceleration is enabled.
[*** 0.000000] NR_IRQS:2304 nr_irqs:512 16

[*** 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[*** 0.000000] Console: colour VGA+ 80x25
[*** 0.000000] console [tty0] enabled
[*** 0.000000] Fast TSC calibration using PIT
[*** 0.000000] Detected 1995.689 MHz processor.

[*** 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.37 BogoMIPS (lpj=7982756)
[*** 0.008009] pid_max: default: 32768 minimum: 301
[*** 0.008058] Security Framework initialized

[*** 0.008068] AppArmor: AppArmor disabled by boot time parameter
[*** 0.008087] Mount-cache hash table entries: 512
[*** 0.008250] Initializing cgroup subsys cpuacct
[*** 0.008257] Initializing cgroup subsys memory

[*** 0.008268] Initializing cgroup subsys devices
[*** 0.008271] Initializing cgroup subsys freezer
[*** 0.008273] Initializing cgroup subsys net_cls
[*** 0.008276] Initializing cgroup subsys blkio
[*** 0.008284] Initializing cgroup subsys perf_event

[*** 0.008316] Disabled fast string operations
[*** 0.008326] mce: CPU supports 5 MCE banks
[*** 0.008337] CPU0: Thermal monitoring enabled (TM2)
[*** 0.008401] SMP alternatives: switching to UP code
[*** 0.011453] ACPI: Core revision 20110623

[*** 0.016071] Enabling APIC mode:* Flat.* Using 1 I/O APICs
[*** 0.016515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[*** 0.057014] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[*** 0.060003] Performance Events: p6 PMU driver.

[*** 0.060003] ... version:*************** 0
[*** 0.060003] ... bit width:************* 32
[*** 0.060003] ... generic registers:***** 2
[*** 0.060003] ... value mask:************ 00000000ffffffff
[*** 0.060003] ... max period:************ 000000007fffffff

[*** 0.060003] ... fixed-purpose events:** 0
[*** 0.060003] ... event mask:************ 0000000000000003
[*** 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[*** 0.060003] Brought up 1 CPUs
[*** 0.060003] Total of 1 processors activated (3991.37 BogoMIPS).

[*** 0.060003] devtmpfs: initialized
[*** 0.060003] PM: Registering ACPI NVS region at 7feeb000 (86016 bytes)
[*** 0.060003] print_constraints: dummy:
[*** 0.060003] NET: Registered protocol family 16
[*** 0.060003] ACPI: bus type pci registered

[*** 0.060003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[*** 0.060003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[*** 0.060003] PCI: Using MMCONFIG for extended config space

[*** 0.060003] PCI: Using configuration type 1 for base access
[*** 0.060003] bio: create slab <bio-0> at 0
[*** 0.060003] ACPI: Added _OSI(Module Device)
[*** 0.060003] ACPI: Added _OSI(Processor Device)

[*** 0.060003] ACPI: Added _OSI(3.0 _SCP Extensions)
[*** 0.060003] ACPI: Added _OSI(Processor Aggregator Device)
[*** 0.060017] ACPI: EC: Look up EC in DSDT
[*** 0.061985] ACPI: Interpreter enabled
[*** 0.061998] ACPI: (supports S0 S3 S4 S5)

[*** 0.062020] ACPI: Using IOAPIC for interrupt routing
[*** 0.068551] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = "">[*** 0.068666] ACPI: No dock devices found.
[*** 0.068668] HEST: Table not found.

[*** 0.068674] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[*** 0.069017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[*** 0.069702] pci_root PNP0A08:00: host bridge window [io* 0x0000-0x0cf7] (ignored)

[*** 0.069706] pci_root PNP0A08:00: host bridge window [io* 0x0d00-0xffff] (ignored)
[*** 0.069709] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[*** 0.069713] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)

[*** 0.069716] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[*** 0.069719] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[*** 0.069723] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)

[*** 0.069735] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[*** 0.069780] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604
[*** 0.069820] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[*** 0.069824] pci 0000:00:01.0: PME# disabled

[*** 0.069879] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[*** 0.069979] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[*** 0.069985] pci 0000:00:1c.0: PME# disabled
[*** 0.070019] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03

[*** 0.070072] pci 0000:00:1d.0: reg 20: [io* 0x1800-0x181f]
[*** 0.070112] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[*** 0.072010] pci 0000:00:1d.1: reg 20: [io* 0x1820-0x183f]
[*** 0.072050] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03

[*** 0.072103] pci 0000:00:1d.2: reg 20: [io* 0x1840-0x185f]
[*** 0.072144] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[*** 0.072197] pci 0000:00:1d.3: reg 20: [io* 0x1860-0x187f]
[*** 0.072247] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03

[*** 0.072270] pci 0000:00:1d.7: reg 10: [mem 0xc8000000-0xc80003ff]
[*** 0.072368] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[*** 0.072373] pci 0000:00:1d.7: PME# disabled
[*** 0.072396] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604

[*** 0.072483] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
[*** 0.072503] pci 0000:00:1e.2: reg 10: [io* 0x1c00-0x1cff]
[*** 0.072515] pci 0000:00:1e.2: reg 14: [io* 0x1880-0x18bf]
[*** 0.072527] pci 0000:00:1e.2: reg 18: [mem 0xc8000800-0xc80009ff]

[*** 0.072538] pci 0000:00:1e.2: reg 1c: [mem 0xc8000400-0xc80004ff]
[*** 0.072597] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[*** 0.072602] pci 0000:00:1e.2: PME# disabled
[*** 0.072622] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703

[*** 0.072642] pci 0000:00:1e.3: reg 10: [io* 0x2400-0x24ff]
[*** 0.072654] pci 0000:00:1e.3: reg 14: [io* 0x2000-0x207f]
[*** 0.072730] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[*** 0.072735] pci 0000:00:1e.3: PME# disabled

[*** 0.072757] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[*** 0.072860] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[*** 0.072869] pci 0000:00:1f.0: quirk: [io* 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO

[*** 0.072876] pci 0000:00:1f.0: quirk: [io* 0x1180-0x11bf] claimed by ICH6 GPIO
[*** 0.072901] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[*** 0.072918] pci 0000:00:1f.1: reg 10: [io* 0x0000-0x0007]
[*** 0.072929] pci 0000:00:1f.1: reg 14: [io* 0x0000-0x0003]

[*** 0.072941] pci 0000:00:1f.1: reg 18: [io* 0x0000-0x0007]
[*** 0.072953] pci 0000:00:1f.1: reg 1c: [io* 0x0000-0x0003]
[*** 0.072964] pci 0000:00:1f.1: reg 20: [io* 0x18c0-0x18cf]
[*** 0.073009] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05

[*** 0.073078] pci 0000:00:1f.3: reg 20: [io* 0x18e0-0x18ff]
[*** 0.073159] pci 0000:01:00.0: [1002:5653] type 0 class 0x000300
[*** 0.073170] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[*** 0.073178] pci 0000:01:00.0: reg 14: [io* 0x3000-0x30ff]

[*** 0.073186] pci 0000:01:00.0: reg 18: [mem 0xc8100000-0xc810ffff]
[*** 0.073210] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[*** 0.073239] pci 0000:01:00.0: supports D1 D2
[*** 0.073249] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.* You can enable it with 'pcie_aspm=force'

[*** 0.073258] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[*** 0.073262] pci 0000:00:01.0:** bridge window [io* 0x3000-0x3fff]
[*** 0.073265] pci 0000:00:01.0:** bridge window [mem 0xc8100000-0xc81fffff]
[*** 0.073269] pci 0000:00:01.0:** bridge window [mem 0xd0000000-0xd7ffffff pref]

[*** 0.073325] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[*** 0.073391] pci 0000:06:05.0: [8086:4220] type 0 class 0x000280
[*** 0.073419] pci 0000:06:05.0: reg 10: [mem 0xc8206000-0xc8206fff]
[*** 0.073545] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold

[*** 0.073551] pci 0000:06:05.0: PME# disabled
[*** 0.073577] pci 0000:06:06.0: [104c:8031] type 2 class 0x000607
[*** 0.073606] pci 0000:06:06.0: reg 10: [mem 0xc8207000-0xc8207fff]
[*** 0.073649] pci 0000:06:06.0: supports D1 D2

[*** 0.073652] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[*** 0.073658] pci 0000:06:06.0: PME# disabled
[*** 0.073686] pci 0000:06:06.2: [104c:8032] type 0 class 0x000c00
[*** 0.073713] pci 0000:06:06.2: reg 10: [mem 0xc8208000-0xc82087ff]

[*** 0.073731] pci 0000:06:06.2: reg 14: [mem 0xc8200000-0xc8203fff]
[*** 0.073844] pci 0000:06:06.2: supports D1 D2
[*** 0.073847] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
[*** 0.073853] pci 0000:06:06.2: PME# disabled

[*** 0.073879] pci 0000:06:06.3: [104c:8033] type 0 class 0x000180
[*** 0.073906] pci 0000:06:06.3: reg 10: [mem 0xc8204000-0xc8205fff]
[*** 0.074029] pci 0000:06:06.3: supports D1 D2
[*** 0.074032] pci 0000:06:06.3: PME# supported from D0 D1 D2 D3hot

[*** 0.074038] pci 0000:06:06.3: PME# disabled
[*** 0.074063] pci 0000:06:06.4: [104c:8034] type 0 class 0x000805
[*** 0.074090] pci 0000:06:06.4: reg 10: [mem 0xc8209000-0xc82090ff]
[*** 0.074106] pci 0000:06:06.4: reg 14: [mem 0xc8208c00-0xc8208cff]

[*** 0.074124] pci 0000:06:06.4: reg 18: [mem 0xc8208800-0xc82088ff]
[*** 0.074221] pci 0000:06:06.4: supports D1 D2
[*** 0.074223] pci 0000:06:06.4: PME# supported from D0 D1 D2 D3hot
[*** 0.074230] pci 0000:06:06.4: PME# disabled

[*** 0.074261] pci 0000:06:07.0: [10ec:8139] type 0 class 0x000200
[*** 0.074289] pci 0000:06:07.0: reg 10: [io* 0x

David Smith 08-14-2012 04:17 AM

Bug#684352: Wifi kill switch always on unless ACPI=off is used
 
With acpi=off

Miho:/home/david# rfkill list all
0: phy0: Wireless LAN
******* Soft blocked: no
******* Hard blocked: no
*******
*******
Without using acpi=off

Miho:/home/david# rfkill list all

0: hp-wifi: Wireless LAN
******* Soft blocked: yes
******* Hard blocked: no
1: phy0: Wireless LAN
******* Soft blocked: yes
******* Hard blocked: yes
Miho:/home/david#

This where it says the wireless is hard blocked, which is incorrect as I can just do this with software...


Miho:/home/david# rfkill unblock all
Miho:/home/david# rfkill list all
0: hp-wifi: Wireless LAN
******* Soft blocked: no
******* Hard blocked: no
1: phy0: Wireless LAN
******* Soft blocked: no
******* Hard blocked: no


Then it shows that it is not hard blocked.

*******
*
After that, the wireless now seems to be working.* I press the hardware switch to disable the wireless and then I get...

Miho:/home/david# rfkill list all

0: hp-wifi: Wireless LAN
******* Soft blocked: no
******* Hard blocked: yes
1: phy0: Wireless LAN
******* Soft blocked: no
******* Hard blocked: yes
Miho:/home/david#


Which is correct as expected... Aside from the fact that it appears I have two wireless devices when I do not.


1) The problem seems to be that every time the PC is started for the first time, rfkill says the wireless is both hardware and software blocked, but really it is just software blocked.
2) rfkill seems to suggest I have two wireless LAN network cards, this is incorrect.* One of my wireless LAN connections disappears when I boot with ACPI=off, the wireless is not hardware or software blocked, and the

wireless works.


All times are GMT. The time now is 05:08 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.