FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 08-06-2012, 01:55 PM
Juha Heinanen
 
Default Bug#684049: linux-image-3.2.0-3-amd64: syslog flooded with hci_hcd related messages

Package: src:linux
Version: 3.2.21-3
Severity: normal

Dear Maintainer,

Recently I noticed that syslog is flooded with these kind of messages:

Aug 6 16:43:26 siika kernel: [ 657.856294] ehci_hcd 0000:00:12.2: PME#
enabled
Aug 6 16:43:26 siika kernel: [ 658.324244] ehci_hcd 0000:00:12.2: BAR 0: set
to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
Aug 6 16:43:26 siika kernel: [ 658.324357] ehci_hcd 0000:00:12.2: restoring
config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
Aug 6 16:43:26 siika kernel: [ 658.324419] ehci_hcd 0000:00:12.2: PME#
disabled
Aug 6 16:43:26 siika kernel: [ 658.324445] ehci_hcd 0000:00:12.2: PCI INT B
-> GSI 17 (level, low) -> IRQ 17
Aug 6 16:43:26 siika kernel: [ 658.368211] ehci_hcd 0000:00:13.2: BAR 0: set
to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
Aug 6 16:43:26 siika kernel: [ 658.368347] ehci_hcd 0000:00:13.2: restoring
config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
Aug 6 16:43:26 siika kernel: [ 658.368413] ehci_hcd 0000:00:13.2: PME#
disabled
Aug 6 16:43:26 siika kernel: [ 658.368440] ehci_hcd 0000:00:13.2: PCI INT B
-> GSI 17 (level, low) -> IRQ 17
Aug 6 16:43:26 siika kernel: [ 658.396646] ohci_hcd 0000:00:12.0: PCI INT A
-> GSI 18 (level, low) -> IRQ 18
Aug 6 16:43:27 siika kernel: [ 658.528792] ohci_hcd 0000:00:13.0: PCI INT A
-> GSI 18 (level, low) -> IRQ 18
Aug 6 16:43:29 siika kernel: [ 660.809470] ohci_hcd 0000:00:12.0: PCI INT A
disabled
Aug 6 16:43:29 siika kernel: [ 660.824144] ehci_hcd 0000:00:13.2: PCI INT B
disabled
Aug 6 16:43:29 siika kernel: [ 660.824222] ehci_hcd 0000:00:13.2: PME#
enabled
Aug 6 16:43:29 siika kernel: [ 660.825707] ohci_hcd 0000:00:13.0: PCI INT A
disabled
Aug 6 16:43:31 siika kernel: [ 662.856405] ehci_hcd 0000:00:12.2: PCI INT B
disabled

I have not noticed that something would not work, but the messages are
annoying.

I don't remember seeing them when I started using wheezy in April.



-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=0c009ddc-ed8b-4e55-a799-0cf38e3174a4 ro

** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 813.809296] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 813.824258] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 813.824277] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 813.824513] ehci_hcd 0000:00:13.2: PME# enabled
[ 815.840121] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 815.840178] ehci_hcd 0000:00:12.2: PME# enabled
[ 816.552119] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 816.552171] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 816.552221] ehci_hcd 0000:00:12.2: PME# disabled
[ 816.552240] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 816.596144] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 816.596197] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 816.596244] ehci_hcd 0000:00:13.2: PME# disabled
[ 816.596264] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 816.624407] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 816.760469] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 818.825090] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 818.840193] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 818.840263] ehci_hcd 0000:00:13.2: PME# enabled
[ 818.864301] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 821.024084] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 821.024145] ehci_hcd 0000:00:12.2: PME# enabled
[ 822.012216] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 822.012350] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 822.012415] ehci_hcd 0000:00:12.2: PME# disabled
[ 822.012441] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 822.056297] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 822.056432] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 822.056495] ehci_hcd 0000:00:13.2: PME# disabled
[ 822.056522] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 822.084591] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 822.216637] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 824.825365] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 824.825464] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 824.840255] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 824.840314] ehci_hcd 0000:00:13.2: PME# enabled
[ 826.856210] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 826.856284] ehci_hcd 0000:00:12.2: PME# enabled
[ 827.472241] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 827.472376] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 827.472440] ehci_hcd 0000:00:12.2: PME# disabled
[ 827.472466] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 827.516269] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 827.516403] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 827.516466] ehci_hcd 0000:00:13.2: PME# disabled
[ 827.516492] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 827.544751] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 827.676708] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 829.820241] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 829.824232] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 829.824329] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 829.824343] ehci_hcd 0000:00:13.2: PME# enabled
[ 831.940096] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 831.940166] ehci_hcd 0000:00:12.2: PME# enabled
[ 832.928203] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 832.928269] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 832.928336] ehci_hcd 0000:00:12.2: PME# disabled
[ 832.928362] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 832.972339] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 832.972475] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 832.972539] ehci_hcd 0000:00:13.2: PME# disabled
[ 832.972566] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 833.000748] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 833.132660] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 835.016165] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 835.016242] ehci_hcd 0000:00:13.2: PME# enabled
[ 835.809361] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 835.809451] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 837.840248] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 837.840321] ehci_hcd 0000:00:12.2: PME# enabled
[ 838.384357] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 838.384493] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 838.384558] ehci_hcd 0000:00:12.2: PME# disabled
[ 838.384584] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 838.428195] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 838.428331] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 838.428393] ehci_hcd 0000:00:13.2: PME# disabled
[ 838.428421] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 838.456662] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 838.588511] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 840.809448] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 840.824119] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 840.824193] ehci_hcd 0000:00:13.2: PME# enabled
[ 840.824348] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 842.852210] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 842.852281] ehci_hcd 0000:00:12.2: PME# enabled
[ 843.840222] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf034c000-0xf034c0ff] (PCI address [0xf034c000-0xf034c0ff])
[ 843.840358] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 843.840422] ehci_hcd 0000:00:12.2: PME# disabled
[ 843.840448] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 843.884259] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 843.884395] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 843.884459] ehci_hcd 0000:00:13.2: PME# disabled
[ 843.884486] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 843.912631] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 844.044644] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 845.928156] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 845.928234] ehci_hcd 0000:00:13.2: PME# enabled
[ 846.016273] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 846.808446] ohci_hcd 0000:00:13.0: PCI INT A disabled

** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dm1 Notebook PC
product_version: 0696110000204600000320100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.13
board_vendor: Hewlett-Packard
board_name: 3387
board_version: 36.15

** Loaded modules:
cbc
cryptd
aes_x86_64
aes_generic
ecb
btusb
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
snd_hrtimer
sctp
crc32c
libcrc32c
nfnetlink
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
ip_tables
x_tables
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
fuse
loop
ecryptfs
snd_hda_codec_idt
snd_hda_codec_hdmi
uvcvideo
videodev
v4l2_compat_ioctl32
media
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
lib80211_crypt_tkip
radeon
snd_seq_midi
wl(P)
snd_seq_midi_event
snd_rawmidi
ttm
drm_kms_helper
joydev
snd_seq
drm
psmouse
snd_seq_device
sp5100_tco
hp_wmi
powernow_k8
mperf
i2c_algo_bit
snd_timer
snd
pcspkr
sparse_keymap
i2c_piix4
hp_accel
lis3lv02d
rfkill
soundcore
lib80211
input_polldev
evdev
i2c_core
k10temp
serio_raw
battery
video
processor
wmi
button
ac
power_supply
ext4
crc16
jbd2
mbcache
ums_realtek
usb_storage
uas
sd_mod
crc_t10dif
ohci_hcd
ehci_hcd
ahci
libahci
libata
scsi_mod
r8169
mii
usbcore
usb_common
thermal
thermal_sys

** Network interface configuration:

auto lo
iface lo inet loopback


iface eth0 inet static
address 192.168.1.3
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
up iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE

auto eth0:1
iface eth0:1 inet static
address 192.98.103.10
netmask 255.255.255.0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether ec:9a:74:4b:88:03 brd ff:ff:ff:ff:ff:ff
inet 192.98.103.10/24 brd 192.98.103.255 scope global eth0:1
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether e4:d5:3d:2d:b8:fc brd ff:ff:ff:ff:ff:ff
inet6 fe80::e6d5:3dff:fe2d:b8fc/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 410411 1852 0 0 0 0 0 0 410411 1852 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
1885 total packets received
0 forwarded
0 incoming packets discarded
1885 incoming packets delivered
1887 requests sent out
314 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
71 active connections openings
71 passive connection openings
0 failed connection attempts
0 connection resets received
112 connections established
1852 segments received
1852 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
23 packets received
0 packets to unknown port received.
0 packet receive errors
33 packets sent
UdpLite:
TcpExt:
15 TCP sockets finished time wait in fast timer
59 delayed acks sent
1104 packets directly queued to recvmsg prequeue.
204018 bytes directly received in process context from prequeue
598 packet headers predicted
465 packets header predicted and directly queued to user
158 acknowledgments not containing data payload received
1155 predicted acknowledgments
IpExt:
InMcastPkts: 23
OutMcastPkts: 25
InBcastPkts: 10
OutBcastPkts: 10
InOctets: 413795
OutOctets: 413875
InMcastOctets: 2944
OutMcastOctets: 3024
InBcastOctets: 440
OutBcastOctets: 440


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 14h Processor Root Complex [1022:1510]
Subsystem: Advanced Micro Devices [AMD] Family 14h Processor Root Complex [1022:1510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6320] [1002:9806] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon

00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] [1002:1314]
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at f0344000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Family 14h Processor Root Port [1022:1512] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0400000-f05fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4394] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4118 [size=8]
Region 1: I/O ports at 4124 [size=4]
Region 2: I/O ports at 4110 [size=8]
Region 3: I/O ports at 4120 [size=4]
Region 4: I/O ports at 4100 [size=16]
Region 5: Memory at f034e000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f034d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f034c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f034b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f034a000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0349000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0348000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1795]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl

07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:3387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:d217 Suyin Corp.


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2

Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1

Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.36
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.36
ii firmware-realtek 0.36
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20511.52435.780387.866635@siika.tutpro.com">http://lists.debian.org/20511.52435.780387.866635@siika.tutpro.com
 
Old 08-06-2012, 02:21 PM
Ben Hutchings
 
Default Bug#684049: linux-image-3.2.0-3-amd64: syslog flooded with hci_hcd related messages

On Mon, 2012-08-06 at 16:55 +0300, Juha Heinanen wrote:
> Package: src:linux
> Version: 3.2.21-3
> Severity: normal
>
> Dear Maintainer,
>
> Recently I noticed that syslog is flooded with these kind of messages:
[...]

This is probably the result of run-time power management. It seems very
eager to turn off the USB ports, but I don't think that's actually a
problem.

I do recognise that syslog should not be filled up with this noise,
though. Can you test whether the attached patch fixes this for you?
Instructions for building a patched kernel package are at
<http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s4.2.1>.

Ben.

--
Ben Hutchings
Theory and practice are closer in theory than in practice.
- John Levine, moderator of comp.compilers
 
Old 08-07-2012, 06:05 AM
Juha Heinanen
 
Default Bug#684049: linux-image-3.2.0-3-amd64: syslog flooded with hci_hcd related messages

Ben Hutchings writes:

> I do recognise that syslog should not be filled up with this noise,
> though. Can you test whether the attached patch fixes this for you?
> Instructions for building a patched kernel package are at
> <http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s4.2.1>.

Ben,

Thanks for the patch. I build and installed patched linux-image and
after that I have not seen those syslog messages anymore. So looks like
the patch fixed the issue.

-- Juha


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20512.45098.916182.491915@siika.tutpro.com">http://lists.debian.org/20512.45098.916182.491915@siika.tutpro.com
 

Thread Tools




All times are GMT. The time now is 02:41 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org