FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 04-12-2008, 03:14 AM
Bill Iglesias
 
Default Bug#475629: linux-image-2.6.24-1-686: ext3 corrupted when log files fill up disk

Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: critical
Justification: breaks the whole system

I first reported the following bug to samba: see https://bugzilla.samba.org/show_bug.cgi?id=5386

This is a copy of what I submitted:
I am using GNOME (2.22.0 Debian) and I used the Network Settings GUI to change
my IP address from 192.168.0.100 to 192.168.1.100. I do not believe I changed
anything else, including the gateway address. I was attempting to communicate
with a network device I had connected to my LAN. I was sharing some files with
a Windows XP computer on the network.
I believe the above was the cause. A few moments later I noticed that the
system was very slow and that the hard drive was continually active.
Eventually I ran out of space. I noticed that many log files had become very
large and I found the following repetitive entries (1000s of them):
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
....
....
....
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239)
reload_interfaces: No subnets to listen to. Waiting..
[2008/04/10 22:06:52, 0]
nsswitch/winbindd_cache.c:initialize_winbindd_cache(2222)
initialize_winbindd_cache: clearing cache and re-creating with version number
1

I hope this helps to find the problem. Some of the log files which were very
large were samba.log, daemon.log, syslog, log.nmbd.

-------- End of Samba report ----------
What I did not report to samba was the fact that the ext3 drive which was mounted at the root (/) became
corrupted. At the end of this report you will see entries from the kernel log for hda6 which is
mounted on /home. THese are similar to what I experienced on hda3. I could not start X as the
font files were corrupted and I had to reinstall them. I suspect there may be other files which I have
yet to find which are corrupted; although all seems to be working for now. When I ran fsck on /dev/hda3 to fix
the problems there were 100s of errors similar to the log below. Then after that it began reporting many
errors about inode - something to the effect that it was reporting 2, but only finding 1. Sorry, I did not
write down the errors. There were 100s and 100s of them (I just kept pressing the space bar) to overwrite.
There is a possibility that this was caused by the fact that once
the disk began to run out of space because of the log files, I could not get a response from the computer but the
disks remained active. I then powered down the machine while it was running. The reason I report
this is because I would have assumed that the ext3 system with journaling would have been able to pick
up from this type of problem.



-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC 2008

** Command line:
root=/dev/hda3 ro

** Not tainted

** Kernel log:
EXT3-fs error (device hda6) in ext3_new_inode: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294975, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
EXT3-fs error (device hda6) in ext3_new_inode: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 23595078
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830
EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 34080830
EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549

** Loaded modules:
Module Size Used by
binfmt_misc 11240 1
ppdev 8804 0
lp 11076 0
ipv6 240836 27
xt_limit 2656 8
xt_tcpudp 3136 55
ipt_LOG 5952 8
ipt_MASQUERADE 3776 0
ipt_TOS 2240 5
ipt_REJECT 4480 1
nf_conntrack_irc 6776 0
nf_conntrack_ftp 8896 0
xt_state 2464 6
iptable_nat 6916 0
nf_nat 18316 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 17352 8 iptable_nat
nf_conntrack 62272 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,x t_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle 2784 1
iptable_filter 2976 1
ip_tables 13188 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 14244 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS, ipt_REJECT,xt_state,iptable_nat,ip_tables
nls_iso8859_1 4128 1
nls_cp437 5792 1
vfat 12224 1
fat 48764 1 vfat
dm_snapshot 16964 0
dm_mirror 21600 0
dm_mod 55812 2 dm_snapshot,dm_mirror
psmouse 36464 0
3c509 12148 0
snd_hda_intel 275264 3
snd_pcm_oss 38272 0
snd_pcm 71780 3 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 15296 1 snd_pcm_oss
snd_seq_dummy 3780 0
snd_seq_oss 29472 0
snd_seq_midi 8160 0
snd_rawmidi 22624 1 snd_seq_midi
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21092 3 snd_pcm,snd_seq
snd_seq_device 7820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 48612 13 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
button 8432 0
soundcore 7552 1 snd
parport_pc 33668 1
parport 34280 3 ppdev,lp,parport_pc
i2c_nforce2 6464 0
snd_page_alloc 10056 2 snd_hda_intel,snd_pcm
i2c_core 22432 1 i2c_nforce2
evdev 11104 3
pcspkr 3200 0
rtc 13052 0
ext3 122888 2
jbd 43732 1 ext3
mbcache 8288 1 ext3
ide_cd 36224 0
cdrom 32512 1 ide_cd
ide_disk 15648 5
sata_nv 25000 0
usbhid 28096 1
hid 34272 1 usbhid
ata_generic 7428 0
amd74xx 8752 0 [permanent]
ehci_hcd 32524 0
ohci_hcd 21988 0
libata 144464 2 sata_nv,ata_generic
scsi_mod 141164 1 libata
generic 4388 0 [permanent]
ide_core 108292 4 ide_cd,ide_disk,amd74xx,generic
skge 39184 0
usbcore 132940 5 usbhid,ehci_hcd,ohci_hcd
thermal 16028 0
processor 36520 1 thermal
fan 4772 0

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation Unknown device [10de:0070] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8189]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:007f] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0075] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:006f] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:00b4] (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 RAM memory [0500]: nVidia Corporation Unknown device [10de:0076] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:0078] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0079] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:007a] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:007b] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.5 RAM memory [0500]: nVidia Corporation Unknown device [10de:007c] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.6 RAM memory [0500]: nVidia Corporation Unknown device [10de:007d] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:04.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:05.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:06.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:07.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5100 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81bc]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d5006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d5007000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at d5005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d3000000-d4ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:818f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7100 GS [10de:016a] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Unknown device [3842:c412]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at d2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb

06:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at b000 [size=256]
Expansion ROM at d3000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy
ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i

-- debconf information:
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 08:20 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org