FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-28-2012, 01:42 AM
Jonathan Nieder
 
Default Bug#622231: xserver-xorg-input-synaptics: synaptics driver not always used

Hi,

Vincent Lefevre wrote:
> On 2011-05-09 23:24:17 +0200, Vincent Lefevre wrote:

>> So, the differences are:
>>
>> When the bug appeared:
>> [ 15.080771] input: PS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
>>
>> When it doesn't appear:
>> [ 10.991351] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
>> [ 11.009085] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
>
> There are similar problems after a suspend/resume

What kind of machine is this? Please attach full "dmesg" output
from a normal boot and an acpidump.

Is this a regression or did this machine always behave this way?
Does the 2.6.32-based kernel in squeeze exhibit the same symptoms?
(Generally it is supposed to work fine on wheezy/sid.)

How about 3.4.y from experimental (or some other kernel 3.3-rc7 or
newer)? If it exhibits the same bug, please send a summary of
symptoms to linux-input@vger.kernel.org, cc-ing Seth Forshee
<seth.forshee@canonical.com> and either me or this bug log so we can
track it. Hopefully someone upstream will be able to give hints for
finding the difference between the cases where the touchpad is
properly detected and not so (e.g., by adding some printk calls).

Hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20120628014208.GA3372@burratino
 
Old 06-28-2012, 07:55 AM
Vincent Lefevre
 
Default Bug#622231: xserver-xorg-input-synaptics: synaptics driver not always used

On 2012-06-27 20:42:08 -0500, Jonathan Nieder wrote:
> What kind of machine is this?

DELL Latitude E6400

> Please attach full "dmesg" output from a normal boot and an
> acpidump.

Attached.

> Is this a regression or did this machine always behave this way?

The problem apparently appeared with 2.6.37 or 2.6.38, but it's
difficult to know if it was present before since it is a bit
difficult to reproduce it, and I don't often reboot the machine
or put it into sleep.

> Does the 2.6.32-based kernel in squeeze exhibit the same symptoms?
> (Generally it is supposed to work fine on wheezy/sid.)

IIRC, I didn't have this problem with 2.6.29, 2.6.30, 2.6.31 and 2.6.32.
But I don't know whether I did enough reboots or sleep/resume at that
time.

> How about 3.4.y from experimental (or some other kernel 3.3-rc7 or
> newer)? If it exhibits the same bug, please send a summary of
> symptoms to linux-input@vger.kernel.org, cc-ing Seth Forshee
> <seth.forshee@canonical.com> and either me or this bug log so we can
> track it. Hopefully someone upstream will be able to give hints for
> finding the difference between the cases where the touchpad is
> properly detected and not so (e.g., by adding some printk calls).

I'll try to do some tests.

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-2) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Tue Jun 26 07:16:11 UTC 2012
[ 0.000000] Command line: root=/dev/mapper/xvii-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df44d400 (usable)
[ 0.000000] BIOS-e820: 00000000df44f400 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Dell Inc. Latitude E6400 /0K672N, BIOS A12 02/13/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf44d max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df44d000
[ 0.000000] 0000000000 - 00df400000 page 2M
[ 0.000000] 00df400000 - 00df44d000 page 4k
[ 0.000000] kernel direct mapping tables up to df44d000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ df447000-df44d000
[ 0.000000] RAMDISK: 374a4000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb9c0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000df451e00 00064 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: FACP 00000000df451c9c 000F4 (v04 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000df452400 06A2B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000df460c00 00040
[ 0.000000] ACPI: HPET 00000000df451f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ 00000000df460400 00030 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: APIC 00000000df452000 00068 (v01 DELL M09 27D9020D ASL 00000047)
[ 0.000000] ACPI: ASF! 00000000df451c00 0006A (v32 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000df451fc0 0003E (v16 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000df452300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SSDT 00000000df450329 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000df44d
[ 0.000000] 0: 0x00100002 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1045462
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 896133 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129278 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df44d000 - 00000000df450000
[ 0.000000] PM: Registered nosave memory: 00000000df450000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
[ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe60000
[ 0.000000] PM: Registered nosave memory: 00000000ffe60000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100002000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82816 r8192 d23680 u1048576
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029329
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/xvii-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4036084k/4718592k available (3409k kernel code, 536744k absent, 145764k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.867 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.73 BogoMIPS (lpj=9575468)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004050] Security Framework initialized
[ 0.004055] AppArmor: AppArmor disabled by boot time parameter
[ 0.004386] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006460] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008821] Mount-cache hash table entries: 256
[ 0.008958] Initializing cgroup subsys cpuacct
[ 0.008962] Initializing cgroup subsys memory
[ 0.008975] Initializing cgroup subsys devices
[ 0.008978] Initializing cgroup subsys freezer
[ 0.008980] Initializing cgroup subsys net_cls
[ 0.008982] Initializing cgroup subsys blkio
[ 0.008990] Initializing cgroup subsys perf_event
[ 0.009023] CPU: Physical Processor ID: 0
[ 0.009025] CPU: Processor Core ID: 0
[ 0.009027] mce: CPU supports 6 MCE banks
[ 0.009036] CPU0: Thermal monitoring enabled (TM2)
[ 0.009040] using mwait in idle threads.
[ 0.009476] ACPI: Core revision 20110623
[ 0.016478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056608] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 96000
[ 0.148037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148073] Brought up 2 CPUs
[ 0.148076] Total of 2 processors activated (9575.70 BogoMIPS).
[ 0.149852] devtmpfs: initialized
[ 0.152973] print_constraints: dummy:
[ 0.152973] NET: Registered protocol family 16
[ 0.152973] ACPI: bus type pci registered
[ 0.152973] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.152973] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.158651] PCI: Using configuration type 1 for base access
[ 0.158659] dmi type 0xB1 record - unknown flag
[ 0.159274] bio: create slab <bio-0> at 0
[ 0.159274] ACPI: Added _OSI(Module Device)
[ 0.159274] ACPI: Added _OSI(Processor Device)
[ 0.159274] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.159274] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160495] ACPI: EC: Look up EC in DSDT
[ 0.165667] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.171563] ACPI: SSDT 00000000df450995 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 0.171794] ACPI: Dynamic OEM Table Load:
[ 0.171796] ACPI: SSDT (null) 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 0.172132] ACPI: SSDT 00000000df450ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 0.172343] ACPI: Dynamic OEM Table Load:
[ 0.172346] ACPI: SSDT (null) 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 0.172621] ACPI: SSDT 00000000df450c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.172869] ACPI: Dynamic OEM Table Load:
[ 0.172872] ACPI: SSDT (null) 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.172969] ACPI: SSDT 00000000df4513b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.173194] ACPI: Dynamic OEM Table Load:
[ 0.173196] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.172121] ACPI: Interpreter enabled
[ 0.172121] ACPI: (supports S0 S3 S4 S5)
[ 0.172121] ACPI: Using IOAPIC for interrupt routing
[ 0.272518] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.275273] ACPI: No dock devices found.
[ 0.275275] HEST: Table not found.
[ 0.275278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.288620] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.314796] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.314799] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.314801] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.314803] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000dffff]
[ 0.314806] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.314808] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff]
[ 0.314810] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
[ 0.314812] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
[ 0.314815] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
[ 0.314817] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.314819] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
[ 0.314821] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
[ 0.314824] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff]
[ 0.314838] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.314858] DMAR: Forcing write-buffer flush capability
[ 0.314859] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.314883] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.314921] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.314924] pci 0000:00:01.0: PME# disabled
[ 0.314981] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.315005] pci 0000:00:19.0: reg 10: [mem 0xf6fe0000-0xf6ffffff]
[ 0.315017] pci 0000:00:19.0: reg 14: [mem 0xf6fdb000-0xf6fdbfff]
[ 0.315028] pci 0000:00:19.0: reg 18: [io 0xefe0-0xefff]
[ 0.315114] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.315119] pci 0000:00:19.0: PME# disabled
[ 0.315143] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.315198] pci 0000:00:1a.0: reg 20: [io 0x6f60-0x6f7f]
[ 0.315264] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.315319] pci 0000:00:1a.1: reg 20: [io 0x6f80-0x6f9f]
[ 0.315385] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.315440] pci 0000:00:1a.2: reg 20: [io 0x6fa0-0x6fbf]
[ 0.315517] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.315542] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.315649] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.315654] pci 0000:00:1a.7: PME# disabled
[ 0.316049] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.316070] pci 0000:00:1b.0: reg 10: [mem 0xf6fdc000-0xf6fdffff 64bit]
[ 0.316165] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.316169] pci 0000:00:1b.0: PME# disabled
[ 0.316196] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.316296] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.316301] pci 0000:00:1c.0: PME# disabled
[ 0.316331] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.316430] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.316435] pci 0000:00:1c.1: PME# disabled
[ 0.316464] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.316564] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.316569] pci 0000:00:1c.2: PME# disabled
[ 0.316604] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.316659] pci 0000:00:1d.0: reg 20: [io 0x6f00-0x6f1f]
[ 0.316725] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.316780] pci 0000:00:1d.1: reg 20: [io 0x6f20-0x6f3f]
[ 0.316847] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.316902] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 0.316980] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.317004] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.317111] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.317116] pci 0000:00:1d.7: PME# disabled
[ 0.317141] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.317230] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.317394] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
[ 0.317421] pci 0000:00:1f.2: reg 10: [io 0x6e70-0x6e77]
[ 0.317432] pci 0000:00:1f.2: reg 14: [io 0x6e78-0x6e7b]
[ 0.317443] pci 0000:00:1f.2: reg 18: [io 0x6e80-0x6e87]
[ 0.317454] pci 0000:00:1f.2: reg 1c: [io 0x6e88-0x6e8b]
[ 0.317465] pci 0000:00:1f.2: reg 20: [io 0x6ea0-0x6ebf]
[ 0.317476] pci 0000:00:1f.2: reg 24: [mem 0xfed1c800-0xfed1cfff]
[ 0.317543] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.317547] pci 0000:00:1f.2: PME# disabled
[ 0.317571] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.317592] pci 0000:00:1f.3: reg 10: [mem 0xf6fdaf00-0xf6fdafff 64bit]
[ 0.317621] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]
[ 0.317710] pci 0000:01:00.0: [10de:06eb] type 0 class 0x000300
[ 0.317728] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
[ 0.317747] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.317766] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
[ 0.317779] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.317791] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.324038] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.324042] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.324045] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
[ 0.324049] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.324104] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.324229] pci 0000:0c:00.0: [8086:4235] type 0 class 0x000280
[ 0.324272] pci 0000:0c:00.0: reg 10: [mem 0xf1ffe000-0xf1ffffff 64bit]
[ 0.324473] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.324484] pci 0000:0c:00.0: PME# disabled
[ 0.332062] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.332070] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff]
[ 0.332131] pci 0000:00:1c.2: PCI bridge to [bus 0d-0d]
[ 0.332185] pci 0000:03:01.0: [1180:0476] type 2 class 0x000607
[ 0.332207] pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.332241] pci 0000:03:01.0: supports D1 D2
[ 0.332243] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332248] pci 0000:03:01.0: PME# disabled
[ 0.332268] pci 0000:03:01.1: [1180:0832] type 0 class 0x000c00
[ 0.332289] pci 0000:03:01.1: reg 10: [mem 0xf1eff800-0xf1efffff]
[ 0.332378] pci 0000:03:01.1: supports D1 D2
[ 0.332380] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332384] pci 0000:03:01.1: PME# disabled
[ 0.332406] pci 0000:03:01.2: [1180:0822] type 0 class 0x000805
[ 0.332425] pci 0000:03:01.2: reg 10: [mem 0xf1eff700-0xf1eff7ff]
[ 0.332515] pci 0000:03:01.2: supports D1 D2
[ 0.332517] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332521] pci 0000:03:01.2: PME# disabled
[ 0.332587] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.332594] pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1efffff]
[ 0.332602] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.332604] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.332607] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.332609] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
[ 0.332612] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.332614] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
[ 0.332617] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[ 0.332619] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
[ 0.332622] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
[ 0.332624] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.332627] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
[ 0.332629] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
[ 0.332632] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
[ 0.332674] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.332704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.333182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.333227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.333279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.333332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.333388] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.333391] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.333393] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.344222] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
[ 0.344294] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.344366] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.344438] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.344509] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.344582] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.344656] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.344717] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.344865] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.344865] vgaarb: loaded
[ 0.344865] vgaarb: bridge control possible 0000:01:00.0
[ 0.344865] PCI: Using ACPI for IRQ routing
[ 0.346331] PCI: pci_cache_line_size set to 64 bytes
[ 0.346487] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
[ 0.346490] reserve RAM buffer: 00000000df44d400 - 00000000dfffffff
[ 0.346601] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.346607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.346611] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.352093] Switching to clocksource hpet
[ 0.353889] pnp: PnP ACPI init
[ 0.353904] ACPI: bus type pnp registered
[ 0.366610] pnp 00:00: [bus 00-ff]
[ 0.366613] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.366615] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.366617] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.366619] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.366622] pnp 00:00: [mem 0x000d4000-0x000dffff window]
[ 0.366624] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.366626] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
[ 0.366628] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
[ 0.366631] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
[ 0.366633] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
[ 0.366635] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.366637] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
[ 0.366639] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
[ 0.366642] pnp 00:00: [mem 0xffc00000-0xffdfffff window]
[ 0.366709] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.366734] pnp 00:01: [irq 12]
[ 0.366761] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.366777] pnp 00:02: [io 0x0060]
[ 0.366779] pnp 00:02: [io 0x0064]
[ 0.366781] pnp 00:02: [io 0x0062]
[ 0.366783] pnp 00:02: [io 0x0066]
[ 0.366788] pnp 00:02: [irq 1]
[ 0.366813] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.366830] pnp 00:03: [io 0x0070-0x0071]
[ 0.366836] pnp 00:03: [irq 8]
[ 0.366837] pnp 00:03: [io 0x0072-0x0077]
[ 0.366862] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.366879] pnp 00:04: [io 0x0061]
[ 0.366882] pnp 00:04: [io 0x0063]
[ 0.366884] pnp 00:04: [io 0x0065]
[ 0.366885] pnp 00:04: [io 0x0067]
[ 0.366911] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.366927] pnp 00:05: [io 0x002e-0x002f]
[ 0.366929] pnp 00:05: [io 0x0c80-0x0caf]
[ 0.366931] pnp 00:05: [io 0x0cc0-0x0cff]
[ 0.366984] system 00:05: [io 0x0c80-0x0caf] has been reserved
[ 0.366987] system 00:05: [io 0x0cc0-0x0cff] could not be reserved
[ 0.366990] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.367009] pnp 00:06: [dma 4]
[ 0.367011] pnp 00:06: [io 0x0000-0x000f]
[ 0.367013] pnp 00:06: [io 0x0080-0x0085]
[ 0.367014] pnp 00:06: [io 0x0087-0x008f]
[ 0.367016] pnp 00:06: [io 0x00c0-0x00df]
[ 0.367018] pnp 00:06: [io 0x0010-0x001f]
[ 0.367020] pnp 00:06: [io 0x0090-0x0091]
[ 0.367021] pnp 00:06: [io 0x0093-0x009f]
[ 0.367049] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.367065] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.367071] pnp 00:07: [irq 13]
[ 0.367097] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.367137] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.367184] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.367187] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.380643] pnp 00:09: [irq 3]
[ 0.380646] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.380709] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.390711] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.390714] pnp 00:0a: [io 0x0cb0-0x0cbb]
[ 0.390764] system 00:0a: [io 0x0cb0-0x0cbb] has been reserved
[ 0.390767] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.390770] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.393371] pnp 00:0b: [io 0x0900-0x092f]
[ 0.393373] pnp 00:0b: [io 0x0931-0x0933]
[ 0.393376] pnp 00:0b: [io 0x0935-0x097f]
[ 0.393378] pnp 00:0b: [io 0x0092]
[ 0.393379] pnp 00:0b: [io 0x00b2-0x00b3]
[ 0.393381] pnp 00:0b: [io 0x0020-0x0021]
[ 0.393383] pnp 00:0b: [io 0x00a0-0x00a1]
[ 0.393385] pnp 00:0b: [irq 0 disabled]
[ 0.393387] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.393389] pnp 00:0b: [io 0x1000-0x1005]
[ 0.393391] pnp 00:0b: [io 0x1008-0x100f]
[ 0.393459] system 00:0b: [io 0x0900-0x092f] has been reserved
[ 0.393462] system 00:0b: [io 0x0931-0x0933] has been reserved
[ 0.393464] system 00:0b: [io 0x0935-0x097f] has been reserved
[ 0.393467] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.393470] system 00:0b: [io 0x1000-0x1005] has been reserved
[ 0.393472] system 00:0b: [io 0x1008-0x100f] has been reserved
[ 0.393475] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.393492] pnp 00:0c: [io 0xf400-0xf4fe]
[ 0.393494] pnp 00:0c: [io 0x0086]
[ 0.393496] pnp 00:0c: [io 0x1006-0x1007]
[ 0.393497] pnp 00:0c: [io 0x100a-0x1059]
[ 0.393499] pnp 00:0c: [io 0x1060-0x107f]
[ 0.393501] pnp 00:0c: [io 0x1080-0x10bf]
[ 0.393503] pnp 00:0c: [io 0x1100-0x111f]
[ 0.393505] pnp 00:0c: [io 0x1010-0x102f]
[ 0.393506] pnp 00:0c: [io 0x0809]
[ 0.393572] system 00:0c: [io 0xf400-0xf4fe] has been reserved
[ 0.393575] system 00:0c: [io 0x1006-0x1007] has been reserved
[ 0.393578] system 00:0c: [io 0x100a-0x1059] could not be reserved
[ 0.393580] system 00:0c: [io 0x1060-0x107f] has been reserved
[ 0.393583] system 00:0c: [io 0x1080-0x10bf] has been reserved
[ 0.393585] system 00:0c: [io 0x1100-0x111f] has been reserved
[ 0.393588] system 00:0c: [io 0x1010-0x102f] has been reserved
[ 0.393590] system 00:0c: [io 0x0809] has been reserved
[ 0.393593] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.410552] pnp 00:0d: [mem 0x00000000-0x0009efff]
[ 0.410554] pnp 00:0d: [mem 0x0009f000-0x0009ffff]
[ 0.410556] pnp 00:0d: [mem 0x000c0000-0x000d3fff]
[ 0.410558] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.410560] pnp 00:0d: [mem 0x00100000-0xdf44d3ff]
[ 0.410562] pnp 00:0d: [mem 0xdf44d400-0xdfefffff]
[ 0.410564] pnp 00:0d: [mem 0xdff00000-0xdfffffff]
[ 0.410566] pnp 00:0d: [mem 0xffe00000-0xffffffff]
[ 0.410568] pnp 00:0d: [mem 0xffa00000-0xffbfffff]
[ 0.410570] pnp 00:0d: [mem 0xfec00000-0xfec0ffff]
[ 0.410572] pnp 00:0d: [mem 0xfee00000-0xfee0ffff]
[ 0.410574] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.410578] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.410579] pnp 00:0d: [mem 0xfeda0000-0xfeda3fff]
[ 0.410581] pnp 00:0d: [mem 0xfeda4000-0xfeda4fff]
[ 0.410583] pnp 00:0d: [mem 0xfeda5000-0xfeda5fff]
[ 0.410585] pnp 00:0d: [mem 0xfeda6000-0xfeda6fff]
[ 0.410587] pnp 00:0d: [mem 0xfed1c800-0xfed1cfff]
[ 0.410589] pnp 00:0d: [mem 0xfed18000-0xfed1bfff]
[ 0.410591] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.410678] system 00:0d: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.410682] system 00:0d: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.410684] system 00:0d: [mem 0x000c0000-0x000d3fff] could not be reserved
[ 0.410687] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.410690] system 00:0d: [mem 0x00100000-0xdf44d3ff] could not be reserved
[ 0.410693] system 00:0d: [mem 0xdf44d400-0xdfefffff] could not be reserved
[ 0.410696] system 00:0d: [mem 0xdff00000-0xdfffffff] has been reserved
[ 0.410699] system 00:0d: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.410702] system 00:0d: [mem 0xffa00000-0xffbfffff] has been reserved
[ 0.410704] system 00:0d: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.410707] system 00:0d: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.410711] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.410714] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.410716] system 00:0d: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.410719] system 00:0d: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.410722] system 00:0d: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.410724] system 00:0d: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.410727] system 00:0d: [mem 0xfed1c800-0xfed1cfff] has been reserved
[ 0.410730] system 00:0d: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.410732] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.410735] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.410787] pnp: PnP ACPI: found 14 devices
[ 0.410789] ACPI: ACPI bus type pnp unregistered
[ 0.417931] PCI: max bus depth: 2 pci_try_num: 3
[ 0.417984] pci 0000:00:1e.0: BAR 15: can't assign mem pref (size 0x4000000)
[ 0.417988] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.417992] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.417995] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.417999] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.418002] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.418005] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.418009] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0600000-0xf07fffff]
[ 0.418012] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.418015] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.418019] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[ 0.418022] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.418024] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.418028] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
[ 0.418031] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.418035] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.418039] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.418045] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
[ 0.418050] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.418057] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.418060] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.418066] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff]
[ 0.418071] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.418078] pci 0000:00:1c.2: PCI bridge to [bus 0d-0d]
[ 0.418082] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.418088] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.418092] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.418102] pci 0000:03:01.0: BAR 0: assigned [mem 0xfc000000-0xfc000fff]
[ 0.418108] pci 0000:03:01.0: BAR 0: set to [mem 0xfc000000-0xfc000fff] (PCI address [0xfc000000-0xfc000fff])
[ 0.418115] pci 0000:03:01.0: BAR 16: can't assign mem (size 0x4000000)
[ 0.418123] pci 0000:03:01.0: BAR 15: can't assign mem pref (size 0x4000000)
[ 0.418126] pci 0000:03:01.0: BAR 14: assigned [io 0x2000-0x20ff]
[ 0.418128] pci 0000:03:01.0: BAR 13: assigned [io 0x2400-0x24ff]
[ 0.418131] pci 0000:03:01.0: CardBus bridge to [bus 04-07]
[ 0.418133] pci 0000:03:01.0: bridge window [io 0x2400-0x24ff]
[ 0.418137] pci 0000:03:01.0: bridge window [io 0x2000-0x20ff]
[ 0.418142] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[ 0.418145] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.418151] pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1efffff]
[ 0.418172] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.418176] pci 0000:00:01.0: setting latency timer to 64
[ 0.418183] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.418188] pci 0000:00:1c.0: setting latency timer to 64
[ 0.418198] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.418202] pci 0000:00:1c.1: setting latency timer to 64
[ 0.418212] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.418216] pci 0000:00:1c.2: setting latency timer to 64
[ 0.418224] pci 0000:00:1e.0: setting latency timer to 64
[ 0.418234] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.418240] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.418242] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.418244] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.418247] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.418249] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.418251] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
[ 0.418253] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.418255] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.418258] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.418260] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
[ 0.418262] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff]
[ 0.418264] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff]
[ 0.418266] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff]
[ 0.418269] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.418271] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
[ 0.418273] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.418275] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
[ 0.418278] pci_bus 0000:0b: resource 1 [mem 0xf0600000-0xf07fffff]
[ 0.418280] pci_bus 0000:0b: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.418282] pci_bus 0000:0c: resource 0 [io 0x4000-0x4fff]
[ 0.418284] pci_bus 0000:0c: resource 1 [mem 0xf1f00000-0xf1ffffff]
[ 0.418287] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.418289] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.418291] pci_bus 0000:0d: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.418293] pci_bus 0000:0d: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.418296] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.418298] pci_bus 0000:03: resource 1 [mem 0xf1e00000-0xf1efffff]
[ 0.418300] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.418302] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.418304] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.418306] pci_bus 0000:03: resource 7 [mem 0x000d4000-0x000dffff]
[ 0.418309] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.418311] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
[ 0.418313] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.418315] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.418317] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.418319] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff]
[ 0.418322] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff]
[ 0.418324] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff]
[ 0.418326] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff]
[ 0.418328] pci_bus 0000:04: resource 0 [io 0x2400-0x24ff]
[ 0.418330] pci_bus 0000:04: resource 1 [io 0x2000-0x20ff]
[ 0.418389] NET: Registered protocol family 2
[ 0.418532] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.419637] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.423292] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.423767] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.423769] TCP reno registered
[ 0.423780] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.423817] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.423974] NET: Registered protocol family 1
[ 0.424053] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.424075] pci 0000:00:1a.0: PCI INT A disabled
[ 0.424086] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.424106] pci 0000:00:1a.1: PCI INT B disabled
[ 0.424117] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.424137] pci 0000:00:1a.2: PCI INT C disabled
[ 0.424147] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.424179] pci 0000:00:1a.7: PCI INT C disabled
[ 0.424198] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.424218] pci 0000:00:1d.0: PCI INT A disabled
[ 0.424226] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.424245] pci 0000:00:1d.1: PCI INT B disabled
[ 0.424253] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.424273] pci 0000:00:1d.2: PCI INT C disabled
[ 0.424283] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.424305] pci 0000:00:1d.7: PCI INT A disabled
[ 0.424345] pci 0000:01:00.0: Boot video device
[ 0.424383] PCI: CLS 64 bytes, default 64
[ 0.424437] Unpacking initramfs...
[ 0.666826] Freeing initrd memory: 11568k freed
[ 0.671178] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.671184] Placing 64MB software IO TLB between ffff8800db447000 - ffff8800df447000
[ 0.671186] software IO TLB at phys 0xdb447000 - 0xdf447000
[ 0.671681] audit: initializing netlink socket (disabled)
[ 0.671695] type=2000 audit(1340843764.664:1): initialized
[ 0.699262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.719274] VFS: Disk quotas dquot_6.5.2
[ 0.719308] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.719379] msgmni has been set to 7905
[ 0.719555] alg: No test for stdrng (krng)
[ 0.719587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.719590] io scheduler noop registered
[ 0.719592] io scheduler deadline registered
[ 0.719607] io scheduler cfq registered (default)
[ 0.719696] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.719726] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.719778] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.719828] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.719903] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.719952] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.720043] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.720093] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.720193] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.720217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.720219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.720611] intel_idle: does not run on family 6 model 23
[ 0.720640] ERST: Table is not found!
[ 0.720641] GHES: HEST is not enabled!
[ 0.720706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.760461] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.800713] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.812227] Linux agpgart interface v0.103
[ 0.812468] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.813089] i8042: Warning: Keylock active
[ 0.816183] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.816190] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.816320] mousedev: PS/2 mouse device common for all mice
[ 0.816366] rtc_cmos 00:03: RTC can wake from S4
[ 0.816480] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.816510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.816522] cpuidle: using governor ladder
[ 0.816524] cpuidle: using governor menu
[ 0.816713] TCP cubic registered
[ 0.816756] NET: Registered protocol family 10
[ 0.817202] Mobile IPv6
[ 0.817205] NET: Registered protocol family 17
[ 0.817208] Registering the dns_resolver key type
[ 0.817354] PM: Hibernation image not present or could not be loaded.
[ 0.817363] registered taskstats version 1
[ 0.827770] rtc_cmos 00:03: setting system clock to 2012-06-28 00:36:05 UTC (1340843765)
[ 0.827826] Initializing network drop monitor service
[ 0.829126] Freeing unused kernel memory: 572k freed
[ 0.829238] Write protecting the kernel read-only data: 6144k
[ 0.829393] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.831891] Freeing unused kernel memory: 668k freed
[ 0.834544] Freeing unused kernel memory: 684k freed
[ 0.896180] udevd[52]: starting version 175
[ 0.914566] usbcore: registered new interface driver usbfs
[ 0.914597] usbcore: registered new interface driver hub
[ 0.939620] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 0.939623] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 0.939655] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.939666] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.939783] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 0.939954] usbcore: registered new device driver usb
[ 0.940353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.948433] SCSI subsystem initialized
[ 0.955485] sdhci: Secure Digital Host Controller Interface driver
[ 0.955488] sdhci: Copyright(c) Pierre Ossman
[ 0.955722] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 0.955739] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.960476] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.963541] libata version 3.00 loaded.
[ 0.970826] mmc0: no vmmc regulator found
[ 0.971866] Registered led device: mmc0::
[ 0.984834] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[ 0.985159] firewire_ohci 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.998075] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.998078] ACPI: Thermal Zone [THM] (54 C)
[ 1.049062] firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[ 1.136267] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:24:e8:97:5f:73
[ 1.136270] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.136295] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004FF-0FF
[ 1.136329] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.136358] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.136361] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.136386] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.136421] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.140314] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.140330] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.160015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.160054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.160056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160059] usb usb1: Product: EHCI Host Controller
[ 1.160060] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.160062] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.160679] hub 1-0:1.0: USB hub found
[ 1.160685] hub 1-0:1.0: 6 ports detected
[ 1.160771] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.160780] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.160784] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.160791] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.160827] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.160861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.160864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160866] usb usb2: Product: UHCI Host Controller
[ 1.160867] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.160869] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.160960] hub 2-0:1.0: USB hub found
[ 1.160964] hub 2-0:1.0: 2 ports detected
[ 1.161030] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.161037] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.161040] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.161050] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 1.161084] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.161116] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.161119] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161121] usb usb3: Product: UHCI Host Controller
[ 1.161122] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.161124] usb usb3: SerialNumber: 0000:00:1a.1
[ 1.161261] hub 3-0:1.0: USB hub found
[ 1.161265] hub 3-0:1.0: 2 ports detected
[ 1.161332] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.161340] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.161343] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.161350] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 1.161375] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.161409] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.161411] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161413] usb usb4: Product: UHCI Host Controller
[ 1.161415] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.161417] usb usb4: SerialNumber: 0000:00:1a.2
[ 1.162008] hub 4-0:1.0: USB hub found
[ 1.162012] hub 4-0:1.0: 2 ports detected
[ 1.162084] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.162092] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.162095] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.162103] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.162129] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.162162] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.162165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162167] usb usb5: Product: UHCI Host Controller
[ 1.162168] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.162170] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.162306] hub 5-0:1.0: USB hub found
[ 1.162310] hub 5-0:1.0: 2 ports detected
[ 1.162376] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.162384] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.162387] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.162394] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.162419] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.162452] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.162454] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162456] usb usb6: Product: UHCI Host Controller
[ 1.162458] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.162460] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.163081] hub 6-0:1.0: USB hub found
[ 1.163085] hub 6-0:1.0: 2 ports detected
[ 1.163154] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.163162] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.163165] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.163174] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.163199] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.163232] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.163235] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.163237] usb usb7: Product: UHCI Host Controller
[ 1.163238] usb usb7: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[ 1.163240] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.163868] hub 7-0:1.0: USB hub found
[ 1.163872] hub 7-0:1.0: 2 ports detected
[ 1.165244] ahci 0000:00:1f.2: version 3.0
[ 1.165256] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.165310] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.165356] ahci: SSS flag set, parallel bus scan disabled
[ 1.165393] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[ 1.165397] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.165402] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.188619] scsi0 : ahci
[ 1.188723] scsi1 : ahci
[ 1.188788] scsi2 : ahci
[ 1.188856] scsi3 : ahci
[ 1.188923] scsi4 : ahci
[ 1.189006] scsi5 : ahci
[ 1.189237] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 45
[ 1.189241] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 45
[ 1.189243] ata3: DUMMY
[ 1.189245] ata4: DUMMY
[ 1.189248] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 45
[ 1.189251] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 45
[ 1.189307] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.189336] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.189341] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.189354] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 1.189387] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.193259] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.193265] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.208018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.208039] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.208042] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.208044] usb usb8: Product: EHCI Host Controller
[ 1.208046] usb usb8: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.208048] usb usb8: SerialNumber: 0000:00:1d.7
[ 1.208652] hub 8-0:1.0: USB hub found
[ 1.208657] hub 8-0:1.0: 6 ports detected
[ 1.548093] firewire_core: created device fw0: GUID 384fc00023cea890, S400
[ 1.668015] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.668019] Switching to clocksource tsc
[ 1.680015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.681673] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[ 1.681676] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.683344] ata1.00: configured for UDMA/133
[ 1.683451] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[ 1.692011] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 1.865628] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
[ 1.865631] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.865633] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
[ 1.865635] usb 1-6: Manufacturer: CN0TX5937248794R05C7
[ 2.108008] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.172015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.185859] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D300, max UDMA/100
[ 2.185862] ata2.00: applying bridge limits
[ 2.199469] ata2.00: configured for UDMA/100
[ 2.201173] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633A D300 PQ: 0 ANSI: 5
[ 2.285866] usb 2-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.285869] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.285871] usb 2-1: Product: BCM2046B1
[ 2.285873] usb 2-1: Manufacturer: Broadcom
[ 2.288901] hub 2-1:1.0: USB hub found
[ 2.290868] hub 2-1:1.0: 3 ports detected
[ 2.520018] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.532007] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.711413] usb 4-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 2.711416] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.711418] usb 4-1: Product: 5880
[ 2.711420] usb 4-1: Manufacturer: Broadcom Corp
[ 2.711421] usb 4-1: SerialNumber: 0123456789ABCD
[ 2.711496] usb 4-1: config 0 descriptor??
[ 2.797867] usb 2-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.840016] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.846279] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.846329] sd 0:0:0:0: [sda] Write Protect is off
[ 2.846332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.846353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.849253] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.849256] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.849355] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.879743] sda: sda1 sda2
[ 2.879982] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.919870] usb 2-1.1: New USB device found, idVendor=413c, idProduct=8157
[ 2.919874] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.928086] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 2.928142] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[ 2.928155] usbcore: registered new interface driver usbhid
[ 2.928156] usbhid: USB HID core driver
[ 2.997873] usb 2-1.2: new full-speed USB device number 4 using uhci_hcd
[ 3.121869] usb 2-1.2: New USB device found, idVendor=413c, idProduct=8158
[ 3.121873] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.130133] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[ 3.130205] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[ 3.183702] device-mapper: uevent: version 1.0.3
[ 3.183759] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 8.591241] fstype: sending ioctl 540f to a partition!
[ 8.699486] PM: Starting manual resume from disk
[ 8.699489] PM: Hibernation image partition 254:2 present
[ 8.699491] PM: Looking for hibernation image.
[ 8.699656] PM: Image not found (code -22)
[ 8.699657] PM: Hibernation image not present or could not be loaded.
[ 8.741458] kjournald starting. Commit interval 5 seconds
[ 8.741525] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 11.474065] udevd[427]: starting version 175
[ 11.989589] wmi: Mapper loaded
[ 11.990527] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.010790] ACPI: Lid Switch [LID]
[ 12.010865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.010870] ACPI: Power Button [PBTN]
[ 12.010928] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 12.010931] ACPI: Sleep Button [SBTN]
[ 12.011007] ACPI: Requesting acpi_cpufreq
[ 12.030467] Monitor-Mwait will be used to enter C-1 state
[ 12.031607] Monitor-Mwait will be used to enter C-2 state
[ 12.039890] acpi device:36: registered as cooling_device0
[ 12.040595] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6
[ 12.040602] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 12.040739] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.042054] Monitor-Mwait will be used to enter C-3 state
[ 12.042064] Marking TSC unstable due to TSC halts in idle
[ 12.042076] ACPI: acpi_idle registered with cpuidle
[ 12.045073] Switching to clocksource hpet
[ 12.070395] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.107785] ACPI: Battery Slot [BAT0] (battery present)
[ 12.107854] ACPI: AC Adapter [AC] (on-line)
[ 12.107977] ACPI: Battery Slot [BAT1] (battery absent)
[ 12.136745] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.193412] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0233]
[ 12.193438] yenta_cardbus 0000:03:01.0: CardBus bridge to [bus 04-07]
[ 12.193441] yenta_cardbus 0000:03:01.0: bridge window [io 0x2400-0x24ff]
[ 12.193446] yenta_cardbus 0000:03:01.0: bridge window [io 0x2000-0x20ff]
[ 12.193451] yenta_cardbus 0000:03:01.0: bridge window [mem 0xf0c00000-0xf0ffffff]
[ 12.193455] yenta_cardbus 0000:03:01.0: bridge window [mem 0xf1000000-0xf13fffff]
[ 12.195217] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 12.276982] iTCO_vendor_support: vendor-support=0
[ 12.278482] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 12.278579] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 12.279132] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.320851] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 12.320855] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 12.320859] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 12.320867] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 12.320870] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf1e00000-0xf1efffff]
[ 12.320873] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf1e00000-0xf1efffff: excluding 0xf1ef0000-0xf1efffff
[ 12.336226] cfg80211: Calling CRDA to update world regulatory domain
[ 12.563032] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 12.563069] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 12.563102] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 12.662714] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 12.677857] [drm] Initialized drm 1.1.0 20060810
[ 12.733846] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.733860] nouveau 0000:01:00.0: setting latency timer to 64
[ 12.735178] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298580a2)
[ 12.739580] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 12.843560] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 12.843564] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 12.843567] [drm] nouveau 0000:01:00.0: Bios version 62.98.3c.00
[ 12.843570] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 12.843573] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 12.843576] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 12.843578] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 12.843580] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022386 0f200010
[ 12.843582] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00020010
[ 12.843584] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 040333a6 0f200010
[ 12.843587] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04033312 00020010
[ 12.843589] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[ 12.843591] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 12.843594] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41 idx 0 tag 0xff
[ 12.843597] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 12.843599] [drm] nouveau 0000:01:00.0: 2: 0x00005246: type 0x46 idx 2 tag 0x07
[ 12.843602] [drm] nouveau 0000:01:00.0: 3: 0x0000a346: type 0x46 idx 3 tag 0x08
[ 12.843612] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD601
[ 12.868945] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD9B3
[ 12.875274] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE259
[ 12.875291] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE34B
[ 12.876396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE557
[ 12.876401] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE5BC
[ 12.896253] [drm] nouveau 0000:01:00.0: 0xE5BC: Condition still not met after 20ms, skipping following opcodes
[ 12.924636] [drm] nouveau 0000:01:00.0: 4 available performance level(s)
[ 1
 
Old 08-20-2012, 12:43 AM
Vincent Lefevre
 
Default Bug#622231: xserver-xorg-input-synaptics: synaptics driver not always used

On 2012-06-28 09:55:44 +0200, Vincent Lefevre wrote:
> On 2012-06-27 20:42:08 -0500, Jonathan Nieder wrote:
> > How about 3.4.y from experimental (or some other kernel 3.3-rc7 or
> > newer)? If it exhibits the same bug, please send a summary of
> > symptoms to linux-input@vger.kernel.org, cc-ing Seth Forshee
> > <seth.forshee@canonical.com> and either me or this bug log so we can
> > track it. Hopefully someone upstream will be able to give hints for
> > finding the difference between the cases where the touchpad is
> > properly detected and not so (e.g., by adding some printk calls).
>
> I'll try to do some tests.

I tried, but couldn't reproduce the bug, IIRC, even with 3.2.21-3
and 3.2.23-1, since the beginning of July. This is a period where
I intensively used the touchpad, and did about 20 reboots and lots
of suspend/resume. If the bug is still there, it's surprising that
I haven't noticed it.

Note: I don't know whether this is related, but there is an
inconsistency in keyboard detection too:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=633849#41

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon)


--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120820004328.GD15370@xvii.vinc17.org">http://lists.debian.org/20120820004328.GD15370@xvii.vinc17.org
 

Thread Tools




All times are GMT. The time now is 12:06 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org