FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-31-2012, 06:25 AM
Gedalya
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On 5/31/2012 1:59 AM, Jonathan Nieder wrote:

Hi,

Gedalya wrote:


Tried removing the nvidia stuff and booting up with nouveau.

[...]

Total system hang as soon as xorg starts. No response from keyboard,
mouse, no response on the network (no ping, no ARP response)

[...]

Using an Nvidia GeForce GT 520.

Do I understand correctly that the system works fine until X starts
(e.g., if you use the "text" kernel command line option)?

Yes. As long as X doesn't start it seems rock solid.

Does X with
the fbdev driver work? (You can test by putting the following in
/etc/X11/xorg.conf.)

Section "Device"
Identifier "geforce"
Driver "fbdev"
EndSection


Yes. This does work. BTW driver "vesa" hangs the same.


Does starting X with the nouveau driver work if you do not start a
GNOME session? (You can test by running "startx xterm" if the xinit
package is installed.)


Interesting. Still working on this one. startx was complaining something
about xorg.conf so I just renamed it, and then it started up. Pretty
frozen at this point, no keyboard, only reset button helps, but I do get
network response - there is ping, initial ssh response but nothing more,
can't actually log in.



Thanks for a clear report.

Hope that helps,
Jonathan





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4FC70EC3.7040401@gedalya.net">http://lists.debian.org/4FC70EC3.7040401@gedalya.net
 
Old 05-31-2012, 06:31 AM
Jonathan Nieder
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

Gedalya wrote:
> On 5/31/2012 1:59 AM, Jonathan Nieder wrote:

>> Does starting X with the nouveau driver work if you do not start a
>> GNOME session? (You can test by running "startx xterm" if the xinit
>> package is installed.)
>
> Interesting. Still working on this one. startx was complaining
> something about xorg.conf so I just renamed it, and then it started
> up. Pretty frozen at this point, no keyboard, only reset button
> helps, but I do get network response - there is ping, initial ssh
> response but nothing more, can't actually log in.

Hm. Might be possible to get a log with netconsole[1].

[1] http://www.kernel.org/doc/Documentation/networking/netconsole.txt
http://blog.mraw.org/2010/11/08/Debugging_using_netconsole/



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120531063143.GD1447@burratino">http://lists.debian.org/20120531063143.GD1447@burratino
 
Old 05-31-2012, 06:36 AM
Gedalya
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On 5/31/2012 2:31 AM, Jonathan Nieder wrote:

Gedalya wrote:

On 5/31/2012 1:59 AM, Jonathan Nieder wrote:

Does starting X with the nouveau driver work if you do not start a
GNOME session? (You can test by running "startx xterm" if the xinit
package is installed.)

Interesting. Still working on this one. startx was complaining
something about xorg.conf so I just renamed it, and then it started
up. Pretty frozen at this point, no keyboard, only reset button
helps, but I do get network response - there is ping, initial ssh
response but nothing more, can't actually log in.

Hm. Might be possible to get a log with netconsole[1].

[1] http://www.kernel.org/doc/Documentation/networking/netconsole.txt
http://blog.mraw.org/2010/11/08/Debugging_using_netconsole/


Tried this again and this time I got a total hang again.

Then I got it to work with the config file so I first tried fbdev and it
worked, then when I switched to nouveau I got again this situation that
it's pretty much hung but with ping.


SSH does respond with failed authentication when it's the wrong
password, but no successful login is possible.


I'm gonna study netconsole now, let's see if I can figure it out.




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4FC7117D.9040407@gedalya.net">http://lists.debian.org/4FC7117D.9040407@gedalya.net
 
Old 05-31-2012, 09:15 PM
Julien Cristau
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On Thu, May 31, 2012 at 00:59:46 -0500, Jonathan Nieder wrote:

> (You can test by running "startx xterm" if the xinit
> package is installed.)
>
You mean "startx /usr/bin/xterm".

Cheers,
Julien



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120531211540.GL31090@radis.cristau.org">http://lists.debian.org/20120531211540.GL31090@radis.cristau.org
 
Old 05-31-2012, 09:15 PM
Julien Cristau
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On Thu, May 31, 2012 at 00:59:46 -0500, Jonathan Nieder wrote:

> (You can test by running "startx xterm" if the xinit
> package is installed.)
>
You mean "startx /usr/bin/xterm".

Cheers,
Julien



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120531211540.GL31090@radis.cristau.org">http://lists.debian.org/20120531211540.GL31090@radis.cristau.org
 
Old 06-01-2012, 03:13 AM
Gedalya
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On 5/31/2012 2:31 AM, Jonathan Nieder wrote:

Hm. Might be possible to get a log with netconsole[1].

[1]http://www.kernel.org/doc/Documentation/networking/netconsole.txt
http://blog.mraw.org/2010/11/08/Debugging_using_netconsole/


Now tried running startx /usr/bin/xterm with nouveau,

[ 82.427553] [drm] nouveau 0000:01:00.0: PDISP: DCB for 6/0xbad00103
not found
[ 82.428536] [drm] nouveau 0000:01:00.0: PDISP: DCB for 0/0xbad00103
not found
[ 82.429483] [drm] nouveau 0000:01:00.0: Table 0x0103 not found for
0/2, using first


I kept a previously opened ssh connection.
When starting X, the screen went black, but didn't totally lock up until
I killed the X process from SSH. No further netconsole output, the
machine went totally dead.


Rebooted, this time tried to start gdm3. This time we got some juice.

[ 84.538008] [drm] nouveau 0000:01:00.0: PDISP: DCB for 6/0xbad00103
not found
[ 84.538990] [drm] nouveau 0000:01:00.0: PDISP: DCB for 0/0xbad00103
not found
[ 84.539937] [drm] nouveau 0000:01:00.0: Table 0x0103 not found for
0/2, using first
[ 85.216875] BUG: unable to handle kernel paging request at
ffff8800f1d5f100
[ 85.216940] IP: [<ffffffffa0473eb8>] evo_wait.constprop.13+0x3f/0xaa
[nouveau]

[ 85.216991] PGD 1606063 PUD 1fffc067 PMD 0
[ 85.217020] Oops: 0002 [#1] SMP
[ 85.217045] CPU 2
[ 85.217057] Modules linked in: usb_storage uas netconsole configfs
nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 loop
firewire_sbp2 tpm_infineon nouveau mxm_wmi snd_hda_codec_hdmi wmi video
snd_usb_audio snd_usbmidi_lib uvcvideo snd_rawmidi snd_hda_codec_realtek
ttm snd_seq_device drm_kms_helper videodev iTCO_wdt iTCO_vendor_support
parport_pc parport psmouse pcspkr serio_raw drm i2c_algo_bit i2c_i801
snd_hda_intel v4l2_compat_ioctl32 snd_hda_codec snd_hwdep snd_pcm
snd_page_alloc media button processor tpm_tis tpm i2c_core tpm_bios
evdev snd_timer snd soundcore thermal_sys ext4 crc16 jbd2 mbcache dm_mod
raid1 md_mod sd_mod crc_t10dif sr_mod cdrom ata_generic usbhid hid
pata_jmicron firewire_ohci firewire_core crc_itu_t uhci_hcd r8169 mii
ahci libahci libata scsi_mod ehci_hcd usbcore usb_common [last unloaded:
scsi_wait_scan]

[ 85.217816]
[ 85.217826] Pid: 2605, comm: Xorg Not tainted 3.2.0-2-amd64 #1
Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P
[ 85.217885] RIP: 0010:[<ffffffffa0473eb8>] [<ffffffffa0473eb8>]
evo_wait.constprop.13+0x3f/0xaa [nouveau]

[ 85.217942] RSP: 0018:ffff88021be35cd8 EFLAGS: 00010212
[ 85.217969] RAX: ffff88003705f000 RBX: ffff88021cdc7000 RCX:
00000000ffffffff
[ 85.218003] RDX: 000000002eb40040 RSI: 0000000000640000 RDI:
ffff88021cdc7000
[ 85.218037] RBP: ffff88021b66bac0 R08: 00000000ffffffff R09:
ffffffff8168d880
[ 85.218071] R10: 00000000ffffffea R11: 00000000ffffffea R12:
000000002eb40050
[ 85.218105] R13: ffff88021b859001 R14: ffff88021db4cbc0 R15:
ffff88021dc03c00
[ 85.218140] FS: 00007fbf30962880(0000) GS:ffff880227d00000(0000)
knlGS:0000000000000000

[ 85.218178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 85.218207] CR2: ffff8800f1d5f100 CR3: 000000021dac7000 CR4:
00000000000406e0
[ 85.218241] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 85.218275] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 85.218310] Process Xorg (pid: 2605, threadinfo ffff88021be34000,
task ffff88021ddb35d0)

[ 85.218348] Stack:
[ 85.218359] ffff88021b859000 ffff88021cdc7000 ffff88021cdc7001
ffffffffa0474303
[ 85.218406] ffff88021b859001 ffff88021b859000 0000000000000000
ffff88021cdc7020
[ 85.218451] ffff88021b859001 ffffffffa04746f4 00000000c01c64a3
ffff88021be35df0

[ 85.218497] Call Trace:
[ 85.218519] [<ffffffffa0474303>] ? nvd0_crtc_cursor_show+0x21/0xf8
[nouveau]
[ 85.218562] [<ffffffffa04746f4>] ? nvd0_crtc_cursor_set+0xd5/0xf1
[nouveau]
[ 85.218602] [<ffffffffa029ad7c>] ? drm_mode_cursor_ioctl+0xe5/0x13d
[drm]

[ 85.218703] [<ffffffffa028f61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 85.218738] [<ffffffffa029ac97>] ? drm_mode_setcrtc+0x376/0x376 [drm]
[ 85.218772] [<ffffffff8134c42d>] ? do_page_fault+0x2fc/0x337
[ 85.218802] [<ffffffff81106605>] ? do_vfs_ioctl+0x459/0x49a
[ 85.218831] [<ffffffff81106691>] ? sys_ioctl+0x4b/0x72
[ 85.218859] [<ffffffff8134e452>] ? system_call_fastpath+0x16/0x1b
[ 85.218888] Code: 89 fb 48 8b a8 08 0f 00 00 e8 06 f4 ff ff 89 c2 c1
ea 02 41 01 d4 41 81 fc ff 03 00 00 76 66 48 8b 45 10 be 00 00 64 00 48
89 df <c7> 04 90 00 00 00 20 31 d2 e8 ed f3 ff ff 45 31 c0 83 c9 ff ba
[ 85.219253] RIP [<ffffffffa0473eb8>] evo_wait.constprop.13+0x3f/0xaa
[nouveau]

[ 85.219299] RSP <ffff88021be35cd8>
[ 85.219316] CR2: ffff8800f1d5f100


Tried pinging the machine at this point and netconsole printed this:

[ 240.648014] INFO: task kworker/2:1:30 blocked for more than 120 seconds.
[ 240.648064] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 240.648122] kworker/2:1 D ffff880227d13540 0 30 2
0x00000000
[ 240.648192] ffff88021ef4f020 0000000000000046 0000000000000000
ffff88021ed39610
[ 240.648272] 0000000000013540 ffff88021ef53fd8 ffff88021ef53fd8
ffff88021ef4f020
[ 240.648351] 0000000000000002 000000011ed55bc0 00000000ffff3323
ffff88021cdc73a0

[ 240.648429] Call Trace:
[ 240.648449] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 240.648486] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 240.648527] [<ffffffffa030616f>] ? output_poll_execute+0x3f/0x169
[drm_kms_helper]

[ 240.648576] [<ffffffff810397ec>] ? finish_task_switch+0x88/0xba
[ 240.648609] [<ffffffffa0306130>] ?
drm_helper_mode_fill_fb_struct+0x21/0x21 [drm_kms_helper]

[ 240.648659] [<ffffffff8105ae01>] ? process_one_work+0x163/0x284
[ 240.648697] [<ffffffff8105bdc9>] ? worker_thread+0xc2/0x145
[ 240.648737] [<ffffffff8105bd07>] ? manage_workers.isra.23+0x15b/0x15b
[ 240.648772] [<ffffffff8105ef05>] ? kthread+0x76/0x7e
[ 240.648807] [<ffffffff813505b4>] ? kernel_thread_helper+0x4/0x10
[ 240.648845] [<ffffffff8105ee8f>] ? kthread_worker_fn+0x139/0x139
[ 240.648886] [<ffffffff813505b0>] ? gs_change+0x13/0x13
[ 240.651131] INFO: task Xorg:2605 blocked for more than 120 seconds.
[ 240.653380] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 240.655625] Xorg D ffff88021ddb35d0 0 2605 2603
0x00400004
[ 240.657913] ffff88021ddb35d0 0000000000000082 0000000000000400
ffff88021d535810
[ 240.660340] 0000000000013540 ffff88021be35fd8 ffff88021be35fd8
ffff88021ddb35d0
[ 240.662599] ffff88021cdc73a0 ffffffffffffff02 ffffffff8104007e
ffff88021cdc73a0

[ 240.664845] Call Trace:
[ 240.666991] [<ffffffff8104007e>] ? mutex_spin_on_owner+0x20/0x39
[ 240.669127] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 240.671213] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 240.673242] [<ffffffffa0304641>] ?
drm_fb_helper_pan_display+0x2f/0x9c [drm_kms_helper]

[ 240.675291] [<ffffffff811d7752>] ? fb_pan_display+0xd4/0x10b
[ 240.677321] [<ffffffff811e3b4c>] ? bit_update_start+0x16/0x32
[ 240.679315] [<ffffffff811e189f>] ? fbcon_switch+0x343/0x3c5
[ 240.681283] [<ffffffff81234bb2>] ? redraw_screen+0xe5/0x171
[ 240.683234] [<ffffffff811e0f5b>] ? fbcon_blank+0x183/0x1c7
[ 240.685188] [<ffffffff810470e5>] ? console_unlock+0x1b3/0x1e8
[ 240.687135] [<ffffffff81070685>] ? arch_local_irq_save+0x11/0x17
[ 240.689083] [<ffffffff813494a4>] ? _raw_spin_lock_irqsave+0x9/0x25
[ 240.691023] [<ffffffff81051fbe>] ? lock_timer_base.isra.29+0x23/0x47
[ 240.692961] [<ffffffff8105227a>] ? __mod_timer+0x139/0x14b
[ 240.694863] [<ffffffff81236282>] ? do_unblank_screen+0xeb/0x144
[ 240.696763] [<ffffffff811b2766>] ? bust_spinlocks+0x12/0x34
[ 240.698644] [<ffffffff8134a250>] ? oops_end+0x33/0xb6
[ 240.700542] [<ffffffff813426cd>] ? no_context+0x1ff/0x20e
[ 240.702416] [<ffffffff81341fc4>] ? pmd_offset+0x16/0x35
[ 240.704266] [<ffffffff8134c2d9>] ? do_page_fault+0x1a8/0x337
[ 240.706090] [<ffffffff8102ef56>] ? change_page_attr_set_clr+0x151/0x31e
[ 240.707920] [<ffffffff811a96cc>] ? ioremap_page_range+0x23c/0x2a0
[ 240.709762] [<ffffffff81349a35>] ? page_fault+0x25/0x30
[ 240.711589] [<ffffffffa0473eb8>] ? evo_wait.constprop.13+0x3f/0xaa
[nouveau]
[ 240.713424] [<ffffffffa0473e9b>] ? evo_wait.constprop.13+0x22/0xaa
[nouveau]
[ 240.715244] [<ffffffffa0474303>] ? nvd0_crtc_cursor_show+0x21/0xf8
[nouveau]
[ 240.717064] [<ffffffffa04746f4>] ? nvd0_crtc_cursor_set+0xd5/0xf1
[nouveau]
[ 240.718868] [<ffffffffa029ad7c>] ? drm_mode_cursor_ioctl+0xe5/0x13d
[drm]

[ 240.720673] [<ffffffffa028f61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 240.722473] [<ffffffffa029ac97>] ? drm_mode_setcrtc+0x376/0x376 [drm]
[ 240.724297] [<ffffffff8134c42d>] ? do_page_fault+0x2fc/0x337
[ 240.726115] [<ffffffff81106605>] ? do_vfs_ioctl+0x459/0x49a
[ 240.727918] [<ffffffff81106691>] ? sys_ioctl+0x4b/0x72
[ 240.729656] [<ffffffff8134e452>] ? system_call_fastpath+0x16/0x1b

My ssh connection is still open and working.
Strange. Yesterday it was going totally dead every time without fail.

kill xorg (not successful):

[ 360.728013] INFO: task kworker/2:1:30 blocked for more than 120 seconds.
[ 360.729687] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 360.731355] kworker/2:1 D ffff880227d13540 0 30 2
0x00000000
[ 360.733069] ffff88021ef4f020 0000000000000046 0000000000000000
ffff88021ed39610
[ 360.734874] 0000000000013540 ffff88021ef53fd8 ffff88021ef53fd8
ffff88021ef4f020
[ 360.736607] 0000000000000002 000000011ed55bc0 00000000ffff3323
ffff88021cdc73a0

[ 360.738328] Call Trace:
[ 360.739977] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 360.741660] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 360.743333] [<ffffffffa030616f>] ? output_poll_execute+0x3f/0x169
[drm_kms_helper]

[ 360.745013] [<ffffffff810397ec>] ? finish_task_switch+0x88/0xba
[ 360.746681] [<ffffffffa0306130>] ?
drm_helper_mode_fill_fb_struct+0x21/0x21 [drm_kms_helper]

[ 360.748359] [<ffffffff8105ae01>] ? process_one_work+0x163/0x284
[ 360.750032] [<ffffffff8105bdc9>] ? worker_thread+0xc2/0x145
[ 360.751692] [<ffffffff8105bd07>] ? manage_workers.isra.23+0x15b/0x15b
[ 360.753362] [<ffffffff8105ef05>] ? kthread+0x76/0x7e
[ 360.755004] [<ffffffff813505b4>] ? kernel_thread_helper+0x4/0x10
[ 360.756651] [<ffffffff8105ee8f>] ? kthread_worker_fn+0x139/0x139
[ 360.758294] [<ffffffff813505b0>] ? gs_change+0x13/0x13
[ 360.759936] INFO: task Xorg:2605 blocked for more than 120 seconds.
[ 360.761600] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 360.763280] Xorg D ffff88021ddb35d0 0 2605 2603
0x00400004
[ 360.765005] ffff88021ddb35d0 0000000000000082 0000000000000400
ffff88021d535810
[ 360.766732] 0000000000013540 ffff88021be35fd8 ffff88021be35fd8
ffff88021ddb35d0
[ 360.768478] ffff88021cdc73a0 ffffffffffffff02 ffffffff8104007e
ffff88021cdc73a0

[ 360.770194] Call Trace:
[ 360.771859] [<ffffffff8104007e>] ? mutex_spin_on_owner+0x20/0x39
[ 360.773549] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 360.775223] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 360.776882] [<ffffffffa0304641>] ?
drm_fb_helper_pan_display+0x2f/0x9c [drm_kms_helper]

[ 360.778555] [<ffffffff811d7752>] ? fb_pan_display+0xd4/0x10b
[ 360.780239] [<ffffffff811e3b4c>] ? bit_update_start+0x16/0x32
[ 360.781912] [<ffffffff811e189f>] ? fbcon_switch+0x343/0x3c5
[ 360.783556] [<ffffffff81234bb2>] ? redraw_screen+0xe5/0x171
[ 360.785198] [<ffffffff811e0f5b>] ? fbcon_blank+0x183/0x1c7
[ 360.786835] [<ffffffff810470e5>] ? console_unlock+0x1b3/0x1e8
[ 360.788492] [<ffffffff81070685>] ? arch_local_irq_save+0x11/0x17
[ 360.790143] [<ffffffff813494a4>] ? _raw_spin_lock_irqsave+0x9/0x25
[ 360.791781] [<ffffffff81051fbe>] ? lock_timer_base.isra.29+0x23/0x47
[ 360.793436] [<ffffffff8105227a>] ? __mod_timer+0x139/0x14b
[ 360.795079] [<ffffffff81236282>] ? do_unblank_screen+0xeb/0x144
[ 360.796743] [<ffffffff811b2766>] ? bust_spinlocks+0x12/0x34
[ 360.798398] [<ffffffff8134a250>] ? oops_end+0x33/0xb6
[ 360.800052] [<ffffffff813426cd>] ? no_context+0x1ff/0x20e
[ 360.801696] [<ffffffff81341fc4>] ? pmd_offset+0x16/0x35
[ 360.803334] [<ffffffff8134c2d9>] ? do_page_fault+0x1a8/0x337
[ 360.804986] [<ffffffff8102ef56>] ? change_page_attr_set_clr+0x151/0x31e
[ 360.806634] [<ffffffff811a96cc>] ? ioremap_page_range+0x23c/0x2a0
[ 360.808287] [<ffffffff81349a35>] ? page_fault+0x25/0x30
[ 360.809957] [<ffffffffa0473eb8>] ? evo_wait.constprop.13+0x3f/0xaa
[nouveau]
[ 360.811613] [<ffffffffa0473e9b>] ? evo_wait.constprop.13+0x22/0xaa
[nouveau]
[ 360.813276] [<ffffffffa0474303>] ? nvd0_crtc_cursor_show+0x21/0xf8
[nouveau]
[ 360.814928] [<ffffffffa04746f4>] ? nvd0_crtc_cursor_set+0xd5/0xf1
[nouveau]
[ 360.816582] [<ffffffffa029ad7c>] ? drm_mode_cursor_ioctl+0xe5/0x13d
[drm]

[ 360.818236] [<ffffffffa028f61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 360.819889] [<ffffffffa029ac97>] ? drm_mode_setcrtc+0x376/0x376 [drm]
[ 360.821573] [<ffffffff8134c42d>] ? do_page_fault+0x2fc/0x337
[ 360.823232] [<ffffffff81106605>] ? do_vfs_ioctl+0x459/0x49a
[ 360.824886] [<ffffffff81106691>] ? sys_ioctl+0x4b/0x72
[ 360.826528] [<ffffffff8134e452>] ? system_call_fastpath+0x16/0x1b

kill -9 xorg: nothing happens.

kill gdm3: nothing happens.

kill -9 gdm3:

[ 480.828015] INFO: task kworker/2:1:30 blocked for more than 120 seconds.
[ 480.829688] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 480.831357] kworker/2:1 D ffff880227d13540 0 30 2
0x00000000
[ 480.833093] ffff88021ef4f020 0000000000000046 0000000000000000
ffff88021ed39610
[ 480.834924] 0000000000013540 ffff88021ef53fd8 ffff88021ef53fd8
ffff88021ef4f020
[ 480.836679] 0000000000000002 000000011ed55bc0 00000000ffff3323
ffff88021cdc73a0

[ 480.838415] Call Trace:
[ 480.840098] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 480.841780] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 480.843457] [<ffffffffa030616f>] ? output_poll_execute+0x3f/0x169
[drm_kms_helper]

[ 480.845135] [<ffffffff810397ec>] ? finish_task_switch+0x88/0xba
[ 480.846801] [<ffffffffa0306130>] ?
drm_helper_mode_fill_fb_struct+0x21/0x21 [drm_kms_helper]

[ 480.848486] [<ffffffff8105ae01>] ? process_one_work+0x163/0x284
[ 480.850165] [<ffffffff8105bdc9>] ? worker_thread+0xc2/0x145
[ 480.851832] [<ffffffff8105bd07>] ? manage_workers.isra.23+0x15b/0x15b
[ 480.853509] [<ffffffff8105ef05>] ? kthread+0x76/0x7e
[ 480.855155] [<ffffffff813505b4>] ? kernel_thread_helper+0x4/0x10
[ 480.856808] [<ffffffff8105ee8f>] ? kthread_worker_fn+0x139/0x139
[ 480.858456] [<ffffffff813505b0>] ? gs_change+0x13/0x13
[ 480.860122] INFO: task Xorg:2605 blocked for more than 120 seconds.
[ 480.861780] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 480.863450] Xorg D ffff88021ddb35d0 0 2605 1
0x00400004
[ 480.865180] ffff88021ddb35d0 0000000000000082 0000000000000400
ffff88021d535810
[ 480.866909] 0000000000013540 ffff88021be35fd8 ffff88021be35fd8
ffff88021ddb35d0
[ 480.868657] ffff88021cdc73a0 ffffffffffffff02 ffffffff8104007e
ffff88021cdc73a0

[ 480.870378] Call Trace:
[ 480.872063] [<ffffffff8104007e>] ? mutex_spin_on_owner+0x20/0x39
[ 480.873748] [<ffffffff81348a8f>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 480.875415] [<ffffffff8134897d>] ? mutex_lock+0x1a/0x2d
[ 480.877083] [<ffffffffa0304641>] ?
drm_fb_helper_pan_display+0x2f/0x9c [drm_kms_helper]

[ 480.878764] [<ffffffff811d7752>] ? fb_pan_display+0xd4/0x10b
[ 480.880457] [<ffffffff811e3b4c>] ? bit_update_start+0x16/0x32
[ 480.882138] [<ffffffff811e189f>] ? fbcon_switch+0x343/0x3c5
[ 480.883791] [<ffffffff81234bb2>] ? redraw_screen+0xe5/0x171
[ 480.885444] [<ffffffff811e0f5b>] ? fbcon_blank+0x183/0x1c7
[ 480.887091] [<ffffffff810470e5>] ? console_unlock+0x1b3/0x1e8
[ 480.888756] [<ffffffff81070685>] ? arch_local_irq_save+0x11/0x17
[ 480.890414] [<ffffffff813494a4>] ? _raw_spin_lock_irqsave+0x9/0x25
[ 480.892076] [<ffffffff81051fbe>] ? lock_timer_base.isra.29+0x23/0x47
[ 480.893735] [<ffffffff8105227a>] ? __mod_timer+0x139/0x14b
[ 480.895388] [<ffffffff81236282>] ? do_unblank_screen+0xeb/0x144
[ 480.897060] [<ffffffff811b2766>] ? bust_spinlocks+0x12/0x34
[ 480.898719] [<ffffffff8134a250>] ? oops_end+0x33/0xb6
[ 480.900376] [<ffffffff813426cd>] ? no_context+0x1ff/0x20e
[ 480.902023] [<ffffffff81341fc4>] ? pmd_offset+0x16/0x35
[ 480.903671] [<ffffffff8134c2d9>] ? do_page_fault+0x1a8/0x337
[ 480.905328] [<ffffffff8102ef56>] ? change_page_attr_set_clr+0x151/0x31e
[ 480.906984] [<ffffffff811a96cc>] ? ioremap_page_range+0x23c/0x2a0
[ 480.908643] [<ffffffff81349a35>] ? page_fault+0x25/0x30
[ 480.910317] [<ffffffffa0473eb8>] ? evo_wait.constprop.13+0x3f/0xaa
[nouveau]
[ 480.911984] [<ffffffffa0473e9b>] ? evo_wait.constprop.13+0x22/0xaa
[nouveau]
[ 480.913653] [<ffffffffa0474303>] ? nvd0_crtc_cursor_show+0x21/0xf8
[nouveau]
[ 480.915311] [<ffffffffa04746f4>] ? nvd0_crtc_cursor_set+0xd5/0xf1
[nouveau]
[ 480.916963] [<ffffffffa029ad7c>] ? drm_mode_cursor_ioctl+0xe5/0x13d
[drm]

[ 480.918631] [<ffffffffa028f61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 480.920311] [<ffffffffa029ac97>] ? drm_mode_setcrtc+0x376/0x376 [drm]
[ 480.921987] [<ffffffff8134c42d>] ? do_page_fault+0x2fc/0x337
[ 480.923639] [<ffffffff81106605>] ? do_vfs_ioctl+0x459/0x49a
[ 480.925295] [<ffffffff81106691>] ? sys_ioctl+0x4b/0x72
[ 480.926938] [<ffffffff8134e452>] ? system_call_fastpath+0x16/0x1b

Still can't kill xorg.
reboot. init 6 actually did it.

renamed xorg.conf, starting gdm3 without a config file (as is the case
by default)


[ 97.134358] BUG: unable to handle kernel paging request at
ffff8800f1d43100
[ 97.134403] IP: [<ffffffffa038aeb8>] evo_wait.constprop.13+0x3f/0xaa
[nouveau]

[ 97.134453] PGD 1606063 PUD 1fffc067 PMD 0
[ 97.134482] Oops: 0002 [#1] SMP
[ 97.134507] CPU 3
[ 97.134518] Modules linked in: usb_storage uas netconsole configfs
nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 loop
firewire_sbp2 tpm_infineon snd_hda_codec_hdmi snd_hda_codec_realtek
snd_hda_intel snd_hda_codec uvcvideo nouveau videodev mxm_wmi wmi video
ttm drm_kms_helper drm snd_usb_audio snd_usbmidi_lib snd_rawmidi
snd_seq_device snd_hwdep v4l2_compat_ioctl32 snd_pcm snd_page_alloc
i2c_algo_bit iTCO_wdt media i2c_i801 i2c_core snd_timer
iTCO_vendor_support tpm_tis parport_pc parport snd processor button
psmouse tpm tpm_bios evdev pcspkr serio_raw soundcore thermal_sys ext4
crc16 jbd2 mbcache dm_mod raid1 md_mod sr_mod cdrom usbhid hid sd_mod
crc_t10dif ata_generic pata_jmicron firewire_ohci firewire_core
crc_itu_t ahci libahci uhci_hcd libata scsi_mod ehci_hcd r8169 mii
usbcore usb_common [last unloaded: scsi_wait_scan]

[ 97.135278]
[ 97.135288] Pid: 2593, comm: Xorg Not tainted 3.2.0-2-amd64 #1
Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P
[ 97.135346] RIP: 0010:[<ffffffffa038aeb8>] [<ffffffffa038aeb8>]
evo_wait.constprop.13+0x3f/0xaa [nouveau]

[ 97.135404] RSP: 0018:ffff88021bd15cd8 EFLAGS: 00010212
[ 97.135430] RAX: ffff880037043000 RBX: ffff88021de81800 RCX:
00000000ffffffff
[ 97.135465] RDX: 000000002eb40040 RSI: 0000000000640000 RDI:
ffff88021de81800
[ 97.135499] RBP: ffff88021bbfeb40 R08: 00000000ffffffff R09:
ffffffff8168d880
[ 97.135533] R10: 00000000ffffffea R11: 00000000ffffffea R12:
000000002eb40050
[ 97.135567] R13: ffff88021bd5c001 R14: ffff88021ba5c140 R15:
ffff88021be66400
[ 97.135602] FS: 00007fbf14f9f880(0000) GS:ffff880227d80000(0000)
knlGS:0000000000000000

[ 97.135641] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.135669] CR2: ffff8800f1d43100 CR3: 000000021b687000 CR4:
00000000000406e0
[ 97.135703] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 97.135737] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 97.135772] Process Xorg (pid: 2593, threadinfo ffff88021bd14000,
task ffff88021b7081c0)

[ 97.135810] Stack:
[ 97.135822] ffff88021bd5c000 ffff88021de81800 ffff88021de81801
ffffffffa038b303
[ 97.135868] ffff88021bd5c001 ffff88021bd5c000 0000000000000000
ffff88021de81820
[ 97.135913] ffff88021bd5c001 ffffffffa038b6f4 00000000c01c64a3
ffff88021bd15df0

[ 97.135959] Call Trace:
[ 97.135981] [<ffffffffa038b303>] ? nvd0_crtc_cursor_show+0x21/0xf8
[nouveau]
[ 97.136012] [<ffffffffa038b6f4>] ? nvd0_crtc_cursor_set+0xd5/0xf1
[nouveau]
[ 97.136012] [<ffffffffa0316d7c>] ? drm_mode_cursor_ioctl+0xe5/0x13d
[drm]

[ 97.136012] [<ffffffffa030b61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 97.136012] [<ffffffffa0316c97>] ? drm_mode_setcrtc+0x376/0x376 [drm]
[ 97.136012] [<ffffffff8134c42d>] ? do_page_fault+0x2fc/0x337
[ 97.136012] [<ffffffff81106605>] ? do_vfs_ioctl+0x459/0x49a
[ 97.136012] [<ffffffff81106691>] ? sys_ioctl+0x4b/0x72
[ 97.136012] [<ffffffff8134e452>] ? system_call_fastpath+0x16/0x1b
[ 97.136012] Code: 89 fb 48 8b a8 08 0f 00 00 e8 06 f4 ff ff 89 c2 c1
ea 02 41 01 d4 41 81 fc ff 03 00 00 76 66 48 8b 45 10 be 00 00 64 00 48
89 df <c7> 04 90 00 00 00 20 31 d2 e8 ed f3 ff ff 45 31 c0 83 c9 ff ba
[ 97.136012] RIP [<ffffffffa038aeb8>] evo_wait.constprop.13+0x3f/0xaa
[nouveau]

[ 97.136012] RSP <ffff88021bd15cd8>
[ 97.136012] CR2: ffff8800f1d43100

keboard totally dead. ping works. my ssh connection still works.
well, for some reason I seem to be unable to reproduce yesterday's total
hang.






--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4FC8334A.3060508@gedalya.net">http://lists.debian.org/4FC8334A.3060508@gedalya.net
 
Old 06-01-2012, 05:57 AM
Jonathan Nieder
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

Gedalya wrote:

> Now tried running startx /usr/bin/xterm with nouveau,
>
> [ 82.427553] [drm] nouveau 0000:01:00.0: PDISP: DCB for
> 6/0xbad00103 not found
> [ 82.428536] [drm] nouveau 0000:01:00.0: PDISP: DCB for
> 0/0xbad00103 not found
> [ 82.429483] [drm] nouveau 0000:01:00.0: Table 0x0103 not found
> for 0/2, using first
>
> I kept a previously opened ssh connection.
> When starting X, the screen went black, but didn't totally lock up
> until I killed the X process from SSH. No further netconsole output,
> the machine went totally dead.

Worrisome. Can you send a full kernel log from booting and doing
this, including the boot-up sequence? Please send it as an attachment
if possible so the log doesn't get corrupted in transit (e.g. by line
wrapping).

Thanks,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120601055746.GC28116@burratino">http://lists.debian.org/20120601055746.GC28116@burratino
 
Old 06-01-2012, 06:23 AM
Gedalya
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

Worrisome. Can you send a full kernel log from booting and doing
this, including the boot-up sequence? Please send it as an attachment
if possible so the log doesn't get corrupted in transit (e.g. by line
wrapping).

Thanks,
Jonathan

Here.


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.18-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Mon May 21 17:45:41 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=8256ffa7-efca-4f5b-8d1c-411dc3ac075e ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000d7eb0000 - 00000000d7ee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7ee2000 - 00000000d7ef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d7ef0000 - 00000000d7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e8000000 - 00000000ec000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000228000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F9 04/16/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x228000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 230000000 mask FF0000000 uncachable
[ 0.000000] 6 base 228000000 mask FF8000000 uncachable
[ 0.000000] 7 base 0D7F00000 mask FFFF00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d7f00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xd7eb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f57a0] f57a0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d7eb0000
[ 0.000000] 0000000000 - 00d7e00000 page 2M
[ 0.000000] 00d7e00000 - 00d7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to d7eb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000228000000
[ 0.000000] 0100000000 - 0228000000 page 2M
[ 0.000000] kernel direct mapping tables up to 228000000 @ d7ea6000-d7eb0000
[ 0.000000] RAMDISK: 36a4a000 - 3751d000
[ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000d7ee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000d7ee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000d7ee2180 050A9 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000d7eb0000 00040
[ 0.000000] ACPI: EUDS 00000000d7ee79c0 00500 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: HPET 00000000d7ee7880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000d7ee7900 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TCPA 00000000d7ee7980 00032 (v01 HTC HTCACPI 42302E31 GBTU 00000000)
[ 0.000000] ACPI: APIC 00000000d7ee7280 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000d7ee87f0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000228000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000228000000
[ 0.000000] NODE_DATA [0000000227ffb000 - 0000000227ffffff]
[ 0.000000] [ffffea0000000000-ffffea00079fffff] PMD -> [ffff88021f600000-ffff8802267fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00228000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000d7eb0
[ 0.000000] 0: 0x00100000 -> 0x00228000
[ 0.000000] On node 0 totalpages: 2096702
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 866024 pages, LIFO batch:31
[ 0.000000] Normal zone: 16576 pages used for memmap
[ 0.000000] Normal zone: 1195840 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d7eb0000 - 00000000d7ee2000
[ 0.000000] PM: Registered nosave memory: 00000000d7ee2000 - 00000000d7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000d7ef0000 - 00000000d7f00000
[ 0.000000] PM: Registered nosave memory: 00000000d7f00000 - 00000000e8000000
[ 0.000000] PM: Registered nosave memory: 00000000e8000000 - 00000000ec000000
[ 0.000000] PM: Registered nosave memory: 00000000ec000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at ec000000 (gap: ec000000:12c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880227c00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065785
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=8256ffa7-efca-4f5b-8d1c-411dc3ac075e ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8183948k/9043968k available (3403k kernel code, 657160k absent, 202860k reserved, 3329k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2832.892 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5665.78 BogoMIPS (lpj=11331568)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004042] Security Framework initialized
[ 0.004046] AppArmor: AppArmor disabled by boot time parameter
[ 0.004596] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009440] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010904] Mount-cache hash table entries: 256
[ 0.011017] Initializing cgroup subsys cpuacct
[ 0.011022] Initializing cgroup subsys memory
[ 0.011033] Initializing cgroup subsys devices
[ 0.011036] Initializing cgroup subsys freezer
[ 0.011037] Initializing cgroup subsys net_cls
[ 0.011039] Initializing cgroup subsys blkio
[ 0.011045] Initializing cgroup subsys perf_event
[ 0.011072] CPU: Physical Processor ID: 0
[ 0.011073] CPU: Processor Core ID: 0
[ 0.011075] mce: CPU supports 6 MCE banks
[ 0.011082] CPU0: Thermal monitoring enabled (TM2)
[ 0.011085] using mwait in idle threads.
[ 0.011456] ACPI: Core revision 20110623
[ 0.014447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054143] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
[ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 99000
[ 0.144024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144125] #2
[ 0.144126] smpboot cpu 2: start_ip = 99000
[ 0.236041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236159] #3 Ok.
[ 0.236161] smpboot cpu 3: start_ip = 99000
[ 0.328035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.328056] Brought up 4 CPUs
[ 0.328058] Total of 4 processors activated (22663.68 BogoMIPS).
[ 0.332187] devtmpfs: initialized
[ 0.336445] PM: Registering ACPI NVS region at d7eb0000 (204800 bytes)
[ 0.336445] print_constraints: dummy:
[ 0.336445] NET: Registered protocol family 16
[ 0.336445] ACPI: bus type pci registered
[ 0.336445] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe8000000-0xebffffff] (base 0xe8000000)
[ 0.336445] PCI: MMCONFIG at [mem 0xe8000000-0xebffffff] reserved in E820
[ 0.341249] PCI: Using configuration type 1 for base access
[ 0.341820] bio: create slab <bio-0> at 0
[ 0.341820] ACPI: Added _OSI(Module Device)
[ 0.341820] ACPI: Added _OSI(Processor Device)
[ 0.341820] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341820] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.341820] ACPI: EC: Look up EC in DSDT
[ 0.346048] ACPI: SSDT 00000000d7ee7f10 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.346186] ACPI: Dynamic OEM Table Load:
[ 0.346189] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.346314] ACPI: SSDT 00000000d7ee83d0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.346445] ACPI: Dynamic OEM Table Load:
[ 0.346447] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.346575] ACPI: SSDT 00000000d7ee8530 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.346705] ACPI: Dynamic OEM Table Load:
[ 0.346708] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.346835] ACPI: SSDT 00000000d7ee8690 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.346966] ACPI: Dynamic OEM Table Load:
[ 0.346968] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.347106] ACPI: Interpreter enabled
[ 0.347110] ACPI: (supports S0 S3 S4 S5)
[ 0.347127] ACPI: Using IOAPIC for interrupt routing
[ 0.351116] ACPI: No dock devices found.
[ 0.351118] HEST: Table not found.
[ 0.351121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.351168] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.351272] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.351274] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.351276] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.351278] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.351279] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.351281] pci_root PNP0A03:00: host bridge window [mem 0xd7f00000-0xfebfffff]
[ 0.351291] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.351323] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.351351] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.351353] pci 0000:00:01.0: PME# disabled
[ 0.351383] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.351418] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
[ 0.351460] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.351494] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
[ 0.351536] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.351571] pci 0000:00:1a.2: reg 20: [io 0xe200-0xe21f]
[ 0.351616] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.351630] pci 0000:00:1a.7: reg 10: [mem 0xf1405000-0xf14053ff]
[ 0.351705] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.351717] pci 0000:00:1b.0: reg 10: [mem 0xf1400000-0xf1403fff 64bit]
[ 0.351770] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.351773] pci 0000:00:1b.0: PME# disabled
[ 0.351791] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.351856] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.351859] pci 0000:00:1c.0: PME# disabled
[ 0.351878] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.351933] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.351936] pci 0000:00:1c.3: PME# disabled
[ 0.351953] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.352026] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.352029] pci 0000:00:1c.4: PME# disabled
[ 0.352047] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.352102] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.352105] pci 0000:00:1c.5: PME# disabled
[ 0.352124] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.352158] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.352200] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.352235] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.352276] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.352311] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.352357] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.352371] pci 0000:00:1d.7: reg 10: [mem 0xf1404000-0xf14043ff]
[ 0.352441] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.352492] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.352561] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.352564] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.352567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[ 0.352608] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 0.352622] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.352629] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.352635] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.352641] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.352647] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.352654] pci 0000:00:1f.2: reg 24: [mem 0xf1406000-0xf14067ff]
[ 0.352690] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.352693] pci 0000:00:1f.2: PME# disabled
[ 0.352706] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.352718] pci 0000:00:1f.3: reg 10: [mem 0xf1407000-0xf14070ff 64bit]
[ 0.352735] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.352783] pci 0000:01:00.0: [10de:1040] type 0 class 0x000300
[ 0.352791] pci 0000:01:00.0: reg 10: [mem 0xec000000-0xecffffff]
[ 0.352800] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.352808] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.352814] pci 0000:01:00.0: reg 24: [io 0xa000-0xa07f]
[ 0.352820] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.352866] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
[ 0.352874] pci 0000:01:00.1: reg 10: [mem 0xee000000-0xee003fff]
[ 0.352948] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.352951] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.352953] pci 0000:00:01.0: bridge window [mem 0xec000000-0xeeffffff]
[ 0.352956] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.352987] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.353040] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.353117] pci 0000:03:00.0: reg 24: [mem 0xf1100000-0xf1101fff]
[ 0.353173] pci 0000:03:00.0: PME# supported from D3hot
[ 0.353178] pci 0000:03:00.0: PME# disabled
[ 0.353204] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.353225] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
[ 0.353237] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
[ 0.353249] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
[ 0.353261] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
[ 0.353273] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
[ 0.353347] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.353358] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.353362] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.353365] pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.353415] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.353429] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.353454] pci 0000:04:00.0: reg 18: [mem 0xf1010000-0xf1010fff 64bit pref]
[ 0.353470] pci 0000:04:00.0: reg 20: [mem 0xf1000000-0xf100ffff 64bit pref]
[ 0.353481] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.353537] pci 0000:04:00.0: supports D1 D2
[ 0.353539] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353543] pci 0000:04:00.0: PME# disabled
[ 0.360036] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.360040] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.360044] pci 0000:00:1c.4: bridge window [mem 0xef000000-0xefffffff]
[ 0.360050] pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.360105] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.360121] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.360148] pci 0000:05:00.0: reg 18: [mem 0xf1210000-0xf1210fff 64bit pref]
[ 0.360166] pci 0000:05:00.0: reg 20: [mem 0xf1200000-0xf120ffff 64bit pref]
[ 0.360178] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.360242] pci 0000:05:00.0: supports D1 D2
[ 0.360244] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360248] pci 0000:05:00.0: PME# disabled
[ 0.368036] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.368040] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.368044] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.368049] pci 0000:00:1c.5: bridge window [mem 0xf1200000-0xf12fffff 64bit pref]
[ 0.368089] pci 0000:06:07.0: [104c:8024] type 0 class 0x000c00
[ 0.368106] pci 0000:06:07.0: reg 10: [mem 0xf1304000-0xf13047ff]
[ 0.368116] pci 0000:06:07.0: reg 14: [mem 0xf1300000-0xf1303fff]
[ 0.368180] pci 0000:06:07.0: supports D1 D2
[ 0.368182] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.368186] pci 0000:06:07.0: PME# disabled
[ 0.368224] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.368228] pci 0000:00:1e.0: bridge window [mem 0xf1300000-0xf13fffff]
[ 0.368233] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.368235] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.368237] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.368239] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.368241] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.368243] pci 0000:00:1e.0: bridge window [mem 0xd7f00000-0xfebfffff] (subtractive decode)
[ 0.368263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.368395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.368432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.368473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.368505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.368536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.368637] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.368639] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.368641] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.378536] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.378578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.378618] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.378660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.378700] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.378741] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.378783] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.378824] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.378909] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.378909] vgaarb: loaded
[ 0.378909] vgaarb: bridge control possible 0000:01:00.0
[ 0.378909] PCI: Using ACPI for IRQ routing
[ 0.380109] PCI: pci_cache_line_size set to 64 bytes
[ 0.380187] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.380189] reserve RAM buffer: 00000000d7eb0000 - 00000000d7ffffff
[ 0.380274] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.380278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.380282] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.391811] Switching to clocksource hpet
[ 0.391811] pnp: PnP ACPI init
[ 0.391811] ACPI: bus type pnp registered
[ 0.391811] pnp 00:00: [bus 00-3f]
[ 0.391811] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.391811] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.391811] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.391811] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.391811] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.391811] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.391811] pnp 00:00: [mem 0xd7f00000-0xfebfffff window]
[ 0.391811] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.391811] pnp 00:01: [io 0x0010-0x001f]
[ 0.391811] pnp 00:01: [io 0x0022-0x003f]
[ 0.391811] pnp 00:01: [io 0x0044-0x004d]
[ 0.391811] pnp 00:01: [io 0x0050-0x005f]
[ 0.391811] pnp 00:01: [io 0x0062-0x0063]
[ 0.391811] pnp 00:01: [io 0x0065-0x006f]
[ 0.391811] pnp 00:01: [io 0x0074-0x007f]
[ 0.391811] pnp 00:01: [io 0x0091-0x0093]
[ 0.391811] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.391811] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.391811] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.391811] pnp 00:01: [io 0x0290-0x029f]
[ 0.391811] pnp 00:01: [io 0x0800-0x0805]
[ 0.391811] pnp 00:01: [io 0x0290-0x0294]
[ 0.391811] pnp 00:01: [io 0x0880-0x088f]
[ 0.391811] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.391811] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.391811] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.391811] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.391811] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.391811] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391811] pnp 00:02: [dma 4]
[ 0.391811] pnp 00:02: [io 0x0000-0x000f]
[ 0.391811] pnp 00:02: [io 0x0080-0x0090]
[ 0.391811] pnp 00:02: [io 0x0094-0x009f]
[ 0.391811] pnp 00:02: [io 0x00c0-0x00df]
[ 0.391811] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.391811] pnp 00:03: [irq 0 disabled]
[ 0.391811] pnp 00:03: [irq 8]
[ 0.391811] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.391811] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.391811] pnp 00:04: [io 0x0070-0x0073]
[ 0.391811] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.391811] pnp 00:05: [io 0x0061]
[ 0.391811] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.391811] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.391811] pnp 00:06: [irq 13]
[ 0.391811] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.391811] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.391811] pnp 00:07: [irq 4]
[ 0.391811] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.391811] pnp 00:08: [io 0x0378-0x037f]
[ 0.391811] pnp 00:08: [irq 7]
[ 0.391811] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.391811] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[ 0.391811] pnp 00:09: [io 0x004e-0x004f]
[ 0.391811] pnp 00:09: [io 0x4700-0x470b]
[ 0.391811] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.391811] pnp 00:0a: [io 0x0400-0x04cf]
[ 0.391811] pnp 00:0a: [io 0x04d2-0x04ff]
[ 0.391811] system 00:0a: [io 0x0400-0x04cf] has been reserved
[ 0.391811] system 00:0a: [io 0x04d2-0x04ff] has been reserved
[ 0.391811] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391811] pnp 00:0b: [mem 0xe8000000-0xebffffff]
[ 0.391811] system 00:0b: [mem 0xe8000000-0xebffffff] has been reserved
[ 0.391811] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391811] pnp 00:0c: [mem 0x000d5000-0x000d7fff]
[ 0.391811] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.391811] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.391811] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.391811] pnp 00:0c: [mem 0xd7eb0000-0xd7efffff]
[ 0.391811] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.391811] pnp 00:0c: [mem 0x00100000-0xd7eaffff]
[ 0.391811] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.391811] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[ 0.391811] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.391811] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.391811] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.391811] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.391811] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.391811] system 00:0c: [mem 0x000d5000-0x000d7fff] has been reserved
[ 0.391811] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.391811] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.391811] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.391811] system 00:0c: [mem 0xd7eb0000-0xd7efffff] could not be reserved
[ 0.391811] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.391811] system 00:0c: [mem 0x00100000-0xd7eaffff] could not be reserved
[ 0.391811] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.391811] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.391811] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.391811] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.391811] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.391811] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.391811] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.391811] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.391811] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.391811] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.391811] pnp: PnP ACPI: found 14 devices
[ 0.391811] ACPI: ACPI bus type pnp unregistered
[ 0.399684] PCI: max bus depth: 1 pci_try_num: 2
[ 0.399717] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf1500000-0xf16fffff 64bit pref]
[ 0.399721] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf1700000-0xf18fffff]
[ 0.399724] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf1900000-0xf1afffff 64bit pref]
[ 0.399727] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.399730] pci 0000:01:00.0: BAR 6: assigned [mem 0xe2000000-0xe207ffff pref]
[ 0.399732] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.399734] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.399737] pci 0000:00:01.0: bridge window [mem 0xec000000-0xeeffffff]
[ 0.399739] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.399743] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.399745] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.399749] pci 0000:00:1c.0: bridge window [mem 0xf1700000-0xf18fffff]
[ 0.399752] pci 0000:00:1c.0: bridge window [mem 0xf1900000-0xf1afffff 64bit pref]
[ 0.399757] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.399759] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.399762] pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.399766] pci 0000:00:1c.3: bridge window [mem 0xf1500000-0xf16fffff 64bit pref]
[ 0.399771] pci 0000:04:00.0: BAR 6: assigned [mem 0xf1020000-0xf102ffff pref]
[ 0.399773] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.399775] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.399779] pci 0000:00:1c.4: bridge window [mem 0xef000000-0xefffffff]
[ 0.399782] pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.399787] pci 0000:05:00.0: BAR 6: assigned [mem 0xf1220000-0xf122ffff pref]
[ 0.399789] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.399791] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.399795] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.399798] pci 0000:00:1c.5: bridge window [mem 0xf1200000-0xf12fffff 64bit pref]
[ 0.399803] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.399807] pci 0000:00:1e.0: bridge window [mem 0xf1300000-0xf13fffff]
[ 0.399819] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399822] pci 0000:00:01.0: setting latency timer to 64
[ 0.399826] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399829] pci 0000:00:1c.0: setting latency timer to 64
[ 0.399837] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.399840] pci 0000:00:1c.3: setting latency timer to 64
[ 0.399844] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399847] pci 0000:00:1c.4: setting latency timer to 64
[ 0.399854] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.399857] pci 0000:00:1c.5: setting latency timer to 64
[ 0.399862] pci 0000:00:1e.0: setting latency timer to 64
[ 0.399864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.399866] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.399868] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.399870] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.399871] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.399873] pci_bus 0000:00: resource 9 [mem 0xd7f00000-0xfebfffff]
[ 0.399875] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.399877] pci_bus 0000:01: resource 1 [mem 0xec000000-0xeeffffff]
[ 0.399878] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.399880] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.399882] pci_bus 0000:02: resource 1 [mem 0xf1700000-0xf18fffff]
[ 0.399884] pci_bus 0000:02: resource 2 [mem 0xf1900000-0xf1afffff 64bit pref]
[ 0.399886] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.399887] pci_bus 0000:03: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.399889] pci_bus 0000:03: resource 2 [mem 0xf1500000-0xf16fffff 64bit pref]
[ 0.399891] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.399893] pci_bus 0000:04: resource 1 [mem 0xef000000-0xefffffff]
[ 0.399895] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.399896] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.399898] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf0ffffff]
[ 0.399900] pci_bus 0000:05: resource 2 [mem 0xf1200000-0xf12fffff 64bit pref]
[ 0.399902] pci_bus 0000:06: resource 1 [mem 0xf1300000-0xf13fffff]
[ 0.399904] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.399905] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.399907] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.399909] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.399910] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.399912] pci_bus 0000:06: resource 9 [mem 0xd7f00000-0xfebfffff]
[ 0.400014] NET: Registered protocol family 2
[ 0.400230] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.401287] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.403805] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.404188] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.404191] TCP reno registered
[ 0.404208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.404264] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.404457] NET: Registered protocol family 1
[ 0.404482] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.404497] pci 0000:00:1a.0: PCI INT A disabled
[ 0.404511] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.404525] pci 0000:00:1a.1: PCI INT B disabled
[ 0.404534] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.404548] pci 0000:00:1a.2: PCI INT C disabled
[ 0.404555] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.420022] pci 0000:00:1a.7: PCI INT C disabled
[ 0.420047] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.420062] pci 0000:00:1d.0: PCI INT A disabled
[ 0.420070] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.420085] pci 0000:00:1d.1: PCI INT B disabled
[ 0.420092] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.420107] pci 0000:00:1d.2: PCI INT C disabled
[ 0.420116] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.436019] pci 0000:00:1d.7: PCI INT A disabled
[ 0.436044] pci 0000:01:00.0: Boot video device
[ 0.436068] PCI: CLS 32 bytes, default 64
[ 0.436130] Unpacking initramfs...
[ 0.631927] Freeing initrd memory: 11084k freed
[ 0.634869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.634874] Placing 64MB software IO TLB between ffff8800d3ea6000 - ffff8800d7ea6000
[ 0.634876] software IO TLB at phys 0xd3ea6000 - 0xd7ea6000
[ 0.635444] audit: initializing netlink socket (disabled)
[ 0.635462] type=2000 audit(1338531027.628:1): initialized
[ 0.663213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.697580] VFS: Disk quotas dquot_6.5.2
[ 0.697622] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.697695] msgmni has been set to 16005
[ 0.697957] alg: No test for stdrng (krng)
[ 0.698015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.698018] io scheduler noop registered
[ 0.698019] io scheduler deadline registered
[ 0.698052] io scheduler cfq registered (default)
[ 0.698151] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.698174] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.698215] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.698244] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.698290] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.698319] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.698367] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.698395] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.698443] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.698471] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.698540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.698562] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.698563] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.698846] intel_idle: MWAIT substates: 0x22220
[ 0.698847] intel_idle: does not run on family 6 model 23
[ 0.698867] ERST: Table is not found!
[ 0.698869] GHES: HEST is not enabled!
[ 0.698937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.719250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.872559] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.908269] Linux agpgart interface v0.103
[ 0.908482] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.908851] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.908859] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.909024] mousedev: PS/2 mouse device common for all mice
[ 0.909074] rtc_cmos 00:04: RTC can wake from S4
[ 0.909164] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.909185] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.909196] cpuidle: using governor ladder
[ 0.909197] cpuidle: using governor menu
[ 0.909381] TCP cubic registered
[ 0.909475] NET: Registered protocol family 10
[ 0.909898] Mobile IPv6
[ 0.909901] NET: Registered protocol family 17
[ 0.909904] Registering the dns_resolver key type
[ 0.910006] PM: Hibernation image not present or could not be loaded.
[ 0.910016] registered taskstats version 1
[ 0.927362] rtc_cmos 00:04: setting system clock to 2012-06-01 06:10:28 UTC (1338531028)
[ 0.927398] Initializing network drop monitor service
[ 0.928520] Freeing unused kernel memory: 568k freed
[ 0.928606] Write protecting the kernel read-only data: 6144k
[ 0.930772] Freeing unused kernel memory: 676k freed
[ 0.932962] Freeing unused kernel memory: 668k freed
[ 0.944141] udevd[59]: starting version 175
[ 0.954621] usbcore: registered new interface driver usbfs
[ 0.954641] usbcore: registered new interface driver hub
[ 0.962843] usbcore: registered new device driver usb
[ 0.963262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.963302] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.963327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.963330] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.963352] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.966547] SCSI subsystem initialized
[ 0.967286] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.967305] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf1405000
[ 0.975396] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.975416] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.975442] r8169 0000:04:00.0: setting latency timer to 64
[ 0.975493] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.975864] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000c74000, 00:24:1d:2f:33:0b, XID 1c4000c0 IRQ 45
[ 0.975867] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 0.975887] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.975901] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.975921] r8169 0000:05:00.0: setting latency timer to 64
[ 0.975969] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 0.976356] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xffffc90000c76000, 00:1f:d0:81:6f:cb, XID 1c4000c0 IRQ 46
[ 0.976359] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 0.979791] libata version 3.00 loaded.
[ 0.982701] firewire_ohci 0000:06:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.984829] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.988023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.988046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.988048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.988050] usb usb1: Product: EHCI Host Controller
[ 0.988052] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 0.988053] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.988183] hub 1-0:1.0: USB hub found
[ 0.988187] hub 1-0:1.0: 6 ports detected
[ 0.988289] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.988305] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.988308] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.988316] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.992223] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.992241] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf1404000
[ 0.992261] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.992288] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.992550] scsi0 : pata_jmicron
[ 0.992640] scsi1 : pata_jmicron
[ 0.993087] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 0.993089] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 1.008031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.008049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.008052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008055] usb usb2: Product: EHCI Host Controller
[ 1.008057] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.008059] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.008173] hub 2-0:1.0: USB hub found
[ 1.008176] hub 2-0:1.0: 6 ports detected
[ 1.008261] ahci 0000:00:1f.2: version 3.0
[ 1.008269] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.008310] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 1.008345] ahci: SSS flag set, parallel bus scan disabled
[ 1.008374] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.008377] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 1.008381] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.040065] firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.048665] scsi2 : ahci
[ 1.048763] scsi3 : ahci
[ 1.048852] scsi4 : ahci
[ 1.048928] scsi5 : ahci
[ 1.049020] scsi6 : ahci
[ 1.049110] scsi7 : ahci
[ 1.049266] ata3: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406100 irq 47
[ 1.049268] ata4: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406180 irq 47
[ 1.049271] ata5: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406200 irq 47
[ 1.049273] ata6: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406280 irq 47
[ 1.049275] ata7: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406300 irq 47
[ 1.049277] ata8: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406380 irq 47
[ 1.049314] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.049318] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.049326] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.049329] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.049336] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.049367] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 1.049398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.049400] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049401] usb usb3: Product: UHCI Host Controller
[ 1.049403] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.049404] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.049510] hub 3-0:1.0: USB hub found
[ 1.049514] hub 3-0:1.0: 2 ports detected
[ 1.049582] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.049587] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.049590] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.049595] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.049623] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 1.049649] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.049651] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049653] usb usb4: Product: UHCI Host Controller
[ 1.049654] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.049655] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.049751] hub 4-0:1.0: USB hub found
[ 1.049755] hub 4-0:1.0: 2 ports detected
[ 1.049843] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.049848] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.049851] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.049858] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.049878] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
[ 1.049907] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.049909] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049911] usb usb5: Product: UHCI Host Controller
[ 1.049912] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.049913] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.049996] hub 5-0:1.0: USB hub found
[ 1.050000] hub 5-0:1.0: 2 ports detected
[ 1.050059] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.050065] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.050067] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.050075] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.050096] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 1.050126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050128] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050130] usb usb6: Product: UHCI Host Controller
[ 1.050131] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.050133] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.050222] hub 6-0:1.0: USB hub found
[ 1.050225] hub 6-0:1.0: 2 ports detected
[ 1.050281] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.050287] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.050290] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.050295] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.050322] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 1.050351] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050353] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050354] usb usb7: Product: UHCI Host Controller
[ 1.050356] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.050357] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.050483] hub 7-0:1.0: USB hub found
[ 1.050486] hub 7-0:1.0: 2 ports detected
[ 1.050540] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.050546] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.050548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.050555] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.050576] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 1.050604] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050606] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050607] usb usb8: Product: UHCI Host Controller
[ 1.050609] usb usb8: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.050610] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.050749] hub 8-0:1.0: USB hub found
[ 1.050752] hub 8-0:1.0: 2 ports detected
[ 1.064039] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.064044] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.064049] ahci 0000:03:00.0: setting latency timer to 64
[ 1.064386] scsi8 : ahci
[ 1.064640] scsi9 : ahci
[ 1.064741] ata9: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100100 irq 19
[ 1.064744] ata10: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100180 irq 19
[ 1.320018] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.384029] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.384060] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.540020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540092] firewire_core: created device fw0: GUID 0044edda0000241d, S400
[ 1.542120] ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 1.542123] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.544586] ata3.00: configured for UDMA/133
[ 1.544711] scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
[ 1.580669] usb 2-4: New USB device found, idVendor=046d, idProduct=0990
[ 1.580672] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.580675] usb 2-4: SerialNumber: A6BEA356
[ 1.632016] Refined TSC clocksource calibration: 2833.010 MHz.
[ 1.632021] Switching to clocksource tsc
[ 1.988018] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 2.036014] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.171607] usb 8-1: New USB device found, idVendor=046d, idProduct=c049
[ 2.171610] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.171613] usb 8-1: Product: USB Gaming Mouse
[ 2.171615] usb 8-1: Manufacturer: Logitech
[ 2.206828] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input0
[ 2.206938] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0
[ 2.210713] generic-usb 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1
[ 2.210736] usbcore: registered new interface driver usbhid
[ 2.210738] usbhid: USB HID core driver
[ 2.416009] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.455707] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 2.455710] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.461123] ata4.00: configured for UDMA/133
[ 2.461224] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 2.592610] usb 8-2: New USB device found, idVendor=046d, idProduct=c315
[ 2.592613] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.592616] usb 8-2: Product: Logitech USB Keyboard
[ 2.592618] usb 8-2: Manufacturer: Logitech
[ 2.609804] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input1
[ 2.609868] generic-usb 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 2.952015] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.397349] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 3.397352] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.404460] ata5.00: configured for UDMA/133
[ 3.404552] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 3.896011] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.901656] ata6.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 3.901659] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.907336] ata6.00: configured for UDMA/133
[ 3.907444] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 4.396011] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.399637] ata7.00: ATAPI: PIONEER BD-RW BDR-207D, 1.20, max UDMA/100
[ 4.403459] ata7.00: configured for UDMA/100
[ 4.413476] scsi 6:0:0:0: CD-ROM PIONEER BD-RW BDR-207D 1.20 PQ: 0 ANSI: 5
[ 4.904012] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.906455] ata8.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
[ 4.907313] ata8.00: configured for UDMA/100
[ 4.909227] scsi 7:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
[ 4.915480] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.915521] sd 2:0:0:0: [sda] Write Protect is off
[ 4.915523] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.915540] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.915785] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.915788] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 4.915787] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.915789] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 4.915833] sd 3:0:0:0: [sdb] Write Protect is off
[ 4.915835] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.915832] sd 4:0:0:0: [sdc] Write Protect is off
[ 4.915838] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.915858] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.915866] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.916088] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.916132] sd 5:0:0:0: [sdd] Write Protect is off
[ 4.916134] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.916154] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.931399] sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[ 4.931402] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.931526] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 4.937072] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.937223] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 4.939608] sdd: sdd1
[ 4.939826] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 4.960395] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 4.960880] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.968823] sdb: sdb1
[ 4.969006] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.977796] sdc: sdc1
[ 4.978021] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 5.783044] md: raid1 personality registered for level 1
[ 5.838993] mdadm: sending ioctl 800c0910 to a partition!
[ 5.838996] mdadm: sending ioctl 800c0910 to a partition!
[ 5.839001] mdadm: sending ioctl 1261 to a partition!
[ 5.839003] mdadm: sending ioctl 1261 to a partition!
[ 5.839228] mdadm: sending ioctl 800c0910 to a partition!
[ 5.839231] mdadm: sending ioctl 800c0910 to a partition!
[ 5.839234] mdadm: sending ioctl 1261 to a partition!
[ 5.839236] mdadm: sending ioctl 1261 to a partition!
[ 5.839514] mdadm: sending ioctl 800c0910 to a partition!
[ 5.839516] mdadm: sending ioctl 800c0910 to a partition!
[ 5.841975] md: md0 stopped.
[ 5.842447] md: bind<sdb1>
[ 5.842564] md: bind<sdc1>
[ 5.843434] bio: create slab <bio-1> at 1
[ 5.843525] md/raid1:md0: active with 2 out of 2 mirrors
[ 5.843545] md0: detected capacity change from 0 to 2000396680192
[ 5.845213] md0: unknown partition table
[ 5.846386] device-mapper: uevent: version 1.0.3
[ 5.846441] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 6.029011] PM: Starting manual resume from disk
[ 6.029013] PM: Hibernation image partition 8:5 present
[ 6.029015] PM: Looking for hibernation image.
[ 6.029337] PM: Image not found (code -22)
[ 6.029339] PM: Hibernation image not present or could not be loaded.
[ 6.050282] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.298004] udevd[376]: starting version 175
[ 7.673990] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.673995] ACPI: Power Button [PWRB]
[ 7.674053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.674056] ACPI: Power Button [PWRF]
[ 7.761193] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.807596] Marking TSC unstable due to TSC halts in idle
[ 7.807603] ACPI: acpi_idle registered with cpuidle
[ 7.807702] Switching to clocksource hpet
[ 7.879289] iTCO_vendor_support: vendor-support=0
[ 7.911070] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[ 7.938714] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.008669] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.008735] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 8.009017] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.175739] Linux media interface: v0.10
[ 8.245824] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.308181] [drm] Initialized drm 1.1.0 20060810
[ 8.332470] wmi: Mapper loaded
[ 8.384522] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.384526] nouveau 0000:01:00.0: setting latency timer to 64
[ 8.385433] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d9000a1)
[ 8.388080] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 8.462655] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 8.462658] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 8.462660] [drm] nouveau 0000:01:00.0: Bios version 75.19.1b.00
[ 8.462662] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 8.462663] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 8.462665] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[ 8.462667] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 8.462669] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011362 00020010
[ 8.462670] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04022310 00000000
[ 8.462673] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 8.462675] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 8.462677] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
[ 8.462679] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff
[ 8.462683] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x72B1
[ 8.468536] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.468571] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 8.468590] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.505064] Linux video capture interface: v2.00
[ 8.507168] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 8.512450] [drm] nouveau 0000:01:00.0: 0x78BC: Condition still not met after 20ms, skipping following opcodes
[ 8.512462] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7925
[ 8.519307] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x890E
[ 8.519309] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x890F
[ 8.519354] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8A00
[ 8.519356] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8A65
[ 8.522124] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input5
[ 8.522179] usbcore: registered new interface driver uvcvideo
[ 8.522180] USB Video Class driver (1.1.1)
[ 8.539201] [drm] nouveau 0000:01:00.0: 0x726F: Condition still not met after 20ms, skipping following opcodes
[ 8.558283] [drm] nouveau 0000:01:00.0: 2 available performance level(s)
[ 8.558286] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz timing 3 voltage 900mV
[ 8.558290] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 600MHz timing 4 voltage 1040mV
[ 8.558397] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz voltage 900mV
[ 8.560454] [TTM] Zone kernel: Available graphics memory: 4098472 kiB.
[ 8.560459] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 8.560460] [TTM] Initializing pool allocator.
[ 8.560469] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[ 8.560474] mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
[ 8.560484] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 8.563149] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.563150] [drm] No driver support for vblank timestamp query.
[ 8.568079] tpm_tis 00:09: Adjusting TPM timeout parameters.
[ 8.648302] hda_codec: ALC889A: BIOS auto-probing.
[ 8.658037] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.905030] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0xe0000, bo ffff88021bdf2c00
[ 8.906404] fbcon: nouveaufb (fb0) is primary device
[ 8.921566] Console: switching to colour frame buffer device 160x64
[ 8.925467] fb0: nouveaufb frame buffer device
[ 8.925469] drm: registered panic notifier
[ 8.925473] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 8.925520] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.925540] hda_intel: Disabling MSI
[ 8.925594] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 9.244675] usbcore: registered new interface driver snd-usb-audio
[ 9.332056] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.332109] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.360015] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 9.392013] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.408089] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[ 9.408195] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
[ 10.319998] Adding 7815584k swap on /dev/sda5. Priority:-1 extents:1 across:7815584k
[ 10.330156] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.595079] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.689714] loop: module loaded
[ 11.101511] scsi_verify_blk_ioctl: 110 callbacks suppressed
[ 11.101513] mdadm: sending ioctl 1261 to a partition!
[ 11.101515] mdadm: sending ioctl 1261 to a partition!
[ 12.242853] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.274247] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.522602] r8169 0000:05:00.0: eth1: link down
[ 12.522609] r8169 0000:05:00.0: eth1: link down
[ 12.523408] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.017092] RPC: Registered named UNIX socket transport module.
[ 13.017094] RPC: Registered udp transport module.
[ 13.017096] RPC: Registered tcp transport module.
[ 13.017097] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.053059] FS-Cache: Loaded
[ 13.084121] FS-Cache: Netfs 'nfs' registered for caching
[ 13.098040] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.024810] r8169 0000:05:00.0: eth1: link up
[ 15.025633] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.008024] eth1: no IPv6 routers present
[ 81.750382] netconsole: local port 6665
[ 81.750409] netconsole: local IP 0.0.0.0
[ 81.750430] netconsole: interface 'eth1'
[ 81.750451] net
 
Old 06-01-2012, 06:44 AM
Gedalya
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

On 6/1/2012 1:57 AM, Jonathan Nieder wrote:

Worrisome. Can you send a full kernel log from booting and doing
this, including the boot-up sequence? Please send it as an attachment
if possible so the log doesn't get corrupted in transit (e.g. by line
wrapping).


Saved the log from partedmagic too just in case it can help. Looks like
the ring buffer here is too small to keep the earliest boot messages.



root@PartedMagic:~# uname -a
Linux PartedMagic 3.3.6-pmagic #1 SMP Sat May 12 20:01:06 CDT 2012 i686 Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz GenuineIntel GNU/Linux

[ 0.303349] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.303669] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.303988] pci_bus 0000:06: resource 9 [mem 0xd7f00000-0xfebfffff]
[ 0.304334] NET: Registered protocol family 2
[ 0.304677] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.305082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.305904] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.306367] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.306688] TCP reno registered
[ 0.306995] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.307335] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.307692] NET: Registered protocol family 1
[ 0.308104] RPC: Registered named UNIX socket transport module.
[ 0.308422] RPC: Registered udp transport module.
[ 0.308735] RPC: Registered tcp transport module.
[ 0.309061] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.331043] pci 0000:01:00.0: Boot video device
[ 0.331379] PCI: CLS 32 bytes, default 64
[ 0.331725] Trying to unpack rootfs image as initramfs...
[ 0.440926] Freeing initrd memory: 38420k freed
[ 0.453397] audit: initializing netlink socket (disabled)
[ 0.453728] type=2000 audit(1338532572.452:1): initialized
[ 0.454640] highmem bounce pool size: 64 pages
[ 0.459860] VFS: Disk quotas dquot_6.5.2
[ 0.460287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.460734] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.461297] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.461618] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.462329] aufs 3.3-20120402
[ 0.462635] msgmni has been set to 1421
[ 0.466088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.466666] io scheduler noop registered
[ 0.466973] io scheduler deadline registered
[ 0.467307] io scheduler cfq registered (default)
[ 0.467989] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.468433] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.468869] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.469337] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.469768] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.470411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.471043] isapnp: Scanning for PnP cards...
[ 0.826975] isapnp: No Plug & Play device found
[ 0.833490] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.098144] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.119600] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.123779] brd: module loaded
[ 1.180634] loop: module loaded
[ 1.181738] Loading iSCSI transport class v2.0-870.
[ 1.183443] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.184214] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.184545] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.185132] mousedev: PS/2 mouse device common for all mice
[ 1.185756] EISA: Probing bus 0 at eisa.0
[ 1.186106] EISA: Cannot allocate resource for mainboard
[ 1.186420] Cannot allocate resource for EISA slot 1
[ 1.186733] Cannot allocate resource for EISA slot 2
[ 1.187058] Cannot allocate resource for EISA slot 3
[ 1.187370] Cannot allocate resource for EISA slot 4
[ 1.187681] Cannot allocate resource for EISA slot 5
[ 1.187992] Cannot allocate resource for EISA slot 6
[ 1.188325] Cannot allocate resource for EISA slot 7
[ 1.188637] Cannot allocate resource for EISA slot 8
[ 1.188948] EISA: Detected 0 cards.
[ 1.189275] cpuidle: using governor ladder
[ 1.189583] cpuidle: using governor menu
[ 1.190029] TCP cubic registered
[ 1.190334] Initializing XFRM netlink socket
[ 1.190646] NET: Registered protocol family 17
[ 1.191120] Registering the dns_resolver key type
[ 1.191450] Using IPI No-Shortcut mode
[ 1.299537] registered taskstats version 1
[ 1.300194] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.300612] Freeing unused kernel memory: 556k freed
[ 1.301106] Write protecting the kernel text: 3548k
[ 1.301451] Write protecting the kernel read-only data: 1340k
[ 1.454034] Refined TSC clocksource calibration: 2833.010 MHz.
[ 1.454039] Switching to clocksource tsc
[ 1.527281] ------------[ cut here ]------------
[ 1.527289] WARNING: at arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2d/0x85()
[ 1.527291] Hardware name: EP45-UD3P
[ 1.527292] empty IPI mask
[ 1.527294] Modules linked in:
[ 1.527299] Pid: 1609, comm: blkid Not tainted 3.3.6-pmagic #1
[ 1.527301] Call Trace:
[ 1.527305] [<c1027abe>] warn_slowpath_common+0x68/0x7d
[ 1.527308] [<c1018b53>] ? default_send_IPI_mask_logical+0x2d/0x85
[ 1.527311] [<c1027b46>] warn_slowpath_fmt+0x2b/0x2f
[ 1.527315] [<c1018b53>] default_send_IPI_mask_logical+0x2d/0x85
[ 1.527318] [<c101747a>] native_send_call_func_ipi+0x4a/0x4e
[ 1.527322] [<c10637d8>] smp_call_function_many+0x182/0x1ac
[ 1.527326] [<c10e94c3>] ? buffer_cpu_notify+0x5f/0x5f
[ 1.527328] [<c10e94c3>] ? buffer_cpu_notify+0x5f/0x5f
[ 1.527332] [<c1063821>] smp_call_function+0x1f/0x23
[ 1.527334] [<c106383a>] on_each_cpu+0x15/0x38
[ 1.527337] [<c10e9055>] invalidate_bh_lrus+0x19/0x1b
[ 1.527339] [<c10ed950>] kill_bdev+0x1a/0x28
[ 1.527343] [<c10ee439>] __blkdev_put+0x62/0x10c
[ 1.527345] [<c1047280>] ? should_resched+0x8/0x22
[ 1.527349] [<c10ee5c0>] blkdev_put+0xdd/0xe3
[ 1.527352] [<c10ee5e5>] blkdev_close+0x1f/0x21
[ 1.527355] [<c10ca6aa>] fput+0xdf/0x164
[ 1.527359] [<c10c7e2a>] filp_close+0x5c/0x66
[ 1.527361] [<c10c83bd>] sys_close+0x6d/0xa0
[ 1.527365] [<c137436c>] syscall_call+0x7/0xb
[ 1.527369] [<c1370000>] ? pcpu_dump_alloc_info+0x4f/0x1d9
[ 1.527372] ---[ end trace e763ce896ce2d360 ]---
[ 1.933077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.933119] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.933123] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.933402] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.937297] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.937345] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf1405000
[ 1.943012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.943030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.943032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.943034] usb usb1: Product: EHCI Host Controller
[ 1.943036] usb usb1: Manufacturer: Linux 3.3.6-pmagic ehci_hcd
[ 1.943038] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.943213] hub 1-0:1.0: USB hub found
[ 1.943220] hub 1-0:1.0: 6 ports detected
[ 1.943373] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.943376] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.943498] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.947398] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.948094] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf1404000
[ 1.954017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.954037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.954040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.954046] usb usb2: Product: EHCI Host Controller
[ 1.954048] usb usb2: Manufacturer: Linux 3.3.6-pmagic ehci_hcd
[ 1.954050] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.954201] hub 2-0:1.0: USB hub found
[ 1.954205] hub 2-0:1.0: 6 ports detected
[ 1.968055] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.968064] ACPI: Power Button [PWRB]
[ 1.968159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.968163] ACPI: Power Button [PWRF]
[ 1.968289] ahci 0000:00:1f.2: version 3.0
[ 1.968331] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.968380] ahci: SSS flag set, parallel bus scan disabled
[ 1.968411] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.968414] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 1.968418] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.979429] scsi0 : ahci
[ 1.979502] scsi1 : ahci
[ 1.979577] scsi2 : ahci
[ 1.979646] scsi3 : ahci
[ 1.979702] scsi4 : ahci
[ 1.979757] scsi5 : ahci
[ 1.979891] ata1: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406100 irq 45
[ 1.979895] ata2: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406180 irq 45
[ 1.979897] ata3: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406200 irq 45
[ 1.979900] ata4: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406280 irq 45
[ 1.979902] ata5: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406300 irq 45
[ 1.979905] ata6: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406380 irq 45
[ 1.990038] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.990042] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.990283] scsi6 : ahci
[ 1.990341] scsi7 : ahci
[ 1.990417] ata7: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100100 irq 19
[ 1.990420] ata8: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100180 irq 19
[ 2.046207] Linux agpgart interface v0.103
[ 2.168216] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.168251] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.168254] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.168434] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.168467] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 2.168494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.168496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.168499] usb usb3: Product: UHCI Host Controller
[ 2.168500] usb usb3: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.168502] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.168593] hub 3-0:1.0: USB hub found
[ 2.168597] hub 3-0:1.0: 2 ports detected
[ 2.168708] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.168712] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.168753] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.168787] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 2.168817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.168819] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.168821] usb usb4: Product: UHCI Host Controller
[ 2.168823] usb usb4: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.168825] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.168951] hub 4-0:1.0: USB hub found
[ 2.168955] hub 4-0:1.0: 2 ports detected
[ 2.169098] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.169101] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.169163] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.169185] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
[ 2.169210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.169212] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.169214] usb usb5: Product: UHCI Host Controller
[ 2.169216] usb usb5: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.169218] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.169329] hub 5-0:1.0: USB hub found
[ 2.169333] hub 5-0:1.0: 2 ports detected
[ 2.169462] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.169465] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.169501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.169523] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 2.169553] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.169555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.169557] usb usb6: Product: UHCI Host Controller
[ 2.169559] usb usb6: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.169561] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.169641] hub 6-0:1.0: USB hub found
[ 2.169644] hub 6-0:1.0: 2 ports detected
[ 2.169806] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.169809] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.169871] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.169898] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 2.169924] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.169926] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.169928] usb usb7: Product: UHCI Host Controller
[ 2.169930] usb usb7: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.169932] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.170081] hub 7-0:1.0: USB hub found
[ 2.170085] hub 7-0:1.0: 2 ports detected
[ 2.170196] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.170199] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.170260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.170281] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 2.170306] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.170308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.170310] usb usb8: Product: UHCI Host Controller
[ 2.170312] usb usb8: Manufacturer: Linux 3.3.6-pmagic uhci_hcd
[ 2.170313] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.170450] hub 8-0:1.0: USB hub found
[ 2.170454] hub 8-0:1.0: 2 ports detected
[ 2.205219] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.205774] scsi8 : pata_jmicron
[ 2.205904] scsi9 : pata_jmicron
[ 2.206475] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 2.206478] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 2.256012] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.295029] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.295062] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.367324] rtc_cmos 00:04: RTC can wake from S4
[ 2.367433] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.367457] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.372631] usb 2-2: New USB device found, idVendor=0930, idProduct=6545
[ 2.372634] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.372637] usb 2-2: Product: DataTraveler 108
[ 2.372638] usb 2-2: Manufacturer: Kingston
[ 2.372640] usb 2-2: SerialNumber: 00187D1174B5EB30A0009E7C
[ 2.439020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.441096] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 2.441099] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.443570] ata1.00: configured for UDMA/133
[ 2.443671] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
[ 2.443869] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.443920] sd 0:0:0:0: [sda] Write Protect is off
[ 2.443922] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.443941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.447801] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.447886] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 2.448076] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xefb60000, 00:24:1d:2f:33:0b, XID 1c4000c0 IRQ 46
[ 2.448079] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 2.448094] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.448157] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 2.448309] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xefb62000, 00:1f:d0:81:6f:cb, XID 1c4000c0 IRQ 47
[ 2.448312] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 2.450862] wmi: Mapper loaded
[ 2.474017] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 2.489200] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.489688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.605432] Initializing USB Mass Storage driver...
[ 2.606079] scsi10 : usb-storage 2-2:1.0
[ 2.606146] usbcore: registered new interface driver usb-storage
[ 2.606148] USB Mass Storage support registered.
[ 2.647307] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.718636] usb 2-4: New USB device found, idVendor=046d, idProduct=0990
[ 2.718639] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 2.718641] usb 2-4: SerialNumber: A6BEA356
[ 2.722445] Marking TSC unstable due to TSC halts in idle
[ 2.722451] ACPI: acpi_idle registered with cpuidle
[ 2.722975] Switching to clocksource hpet
[ 2.907021] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.160020] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 3.322958] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 3.322963] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.328386] ata2.00: configured for UDMA/133
[ 3.328512] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 3.328679] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.328682] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.328723] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.328726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.328744] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.328925] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.331314] usb 8-1: New USB device found, idVendor=046d, idProduct=c049
[ 3.331318] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.331321] usb 8-1: Product: USB Gaming Mouse
[ 3.331323] usb 8-1: Manufacturer: Logitech
[ 3.391532] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 3.391608] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0
[ 3.395402] generic-usb 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1
[ 3.395424] usbcore: registered new interface driver usbhid
[ 3.395425] usbhid: USB HID core driver
[ 3.448168] sdb: sdb1
[ 3.448411] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.543027] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 3.608934] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS
[ 3.609130] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 3.609771] sd 10:0:0:0: [sdc] 7826688 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 3.610273] sd 10:0:0:0: [sdc] Write Protect is off
[ 3.610277] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.610768] sd 10:0:0:0: [sdc] No Caching mode page present
[ 3.610770] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 3.613891] sd 10:0:0:0: [sdc] No Caching mode page present
[ 3.613893] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 3.614666] sdc: sdc1
[ 3.616770] sd 10:0:0:0: [sdc] No Caching mode page present
[ 3.616773] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 3.616776] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 3.705314] usb 8-2: New USB device found, idVendor=046d, idProduct=c315
[ 3.705318] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.705321] usb 8-2: Product: Logitech USB Keyboard
[ 3.705324] usb 8-2: Manufacturer: Logitech
[ 3.722526] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 3.722630] generic-usb 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 3.789021] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.223508] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 4.223512] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.230621] ata3.00: configured for UDMA/133
[ 4.230736] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 4.230882] sd 2:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.230885] sd 2:0:0:0: [sdd] 4096-byte physical blocks
[ 4.230925] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 4.230929] sd 2:0:0:0: [sdd] Write Protect is off
[ 4.230932] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.230951] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.339958] sdd: sdd1
[ 4.340210] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 4.692037] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.697698] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 4.697703] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.703406] ata4.00: configured for UDMA/133
[ 4.703506] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 4.703644] sd 3:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.703686] sd 3:0:0:0: [sde] Write Protect is off
[ 4.703688] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.703707] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.703876] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 4.728837] sde: sde1
[ 4.729055] sd 3:0:0:0: [sde] Attached SCSI disk
[ 5.164038] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.167646] ata5.00: ATAPI: PIONEER BD-RW BDR-207D, 1.20, max UDMA/100
[ 5.171463] ata5.00: configured for UDMA/100
[ 5.192572] scsi 4:0:0:0: CD-ROM PIONEER BD-RW BDR-207D 1.20 PQ: 0 ANSI: 5
[ 5.213551] sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[ 5.213555] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.213705] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 5.213781] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 5.673034] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.675486] ata6.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
[ 5.676339] ata6.00: configured for UDMA/100
[ 5.679531] scsi 5:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
[ 5.682880] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.683043] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 5.683118] sr 5:0:0:0: Attached scsi generic sg6 type 5
[ 5.884847] usbcore: registered new interface driver uas
[ 5.988265] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[ 6.000061] firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 6.210061] skipping empty audio interface (v1)
[ 6.210069] snd-usb-audio: probe of 2-4:1.0 failed with error -5
[ 6.210079] skipping empty audio interface (v1)
[ 6.210083] snd-usb-audio: probe of 2-4:1.1 failed with error -5
[ 6.281595] ppdev: user-space parallel port driver
[ 6.310674] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 6.322552] hda_codec: ALC889A: BIOS auto-probing.
[ 6.331633] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 6.331703] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 6.331762] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 6.331823] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 6.331884] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 6.331940] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 6.331995] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 6.332124] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.332355] hda_intel: Disabling MSI
[ 6.339549] [drm] Initialized drm 1.1.0 20060810
[ 6.501132] firewire_core: created device fw0: GUID 0044edda0000241d, S400
[ 6.540015] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 6.543014] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.543096] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
[ 6.543169] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13
[ 6.545087] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d9000a1)
[ 6.545091] [drm] nouveau 0000:01:00.0: acceleration disabled by default, pass noaccel=0 to force enable
[ 6.547815] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 6.553275] usbcore: registered new interface driver snd-usb-audio
[ 6.593908] Linux video capture interface: v2.00
[ 6.623329] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 6.623333] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 6.623335] [drm] nouveau 0000:01:00.0: Bios version 75.19.1b.00
[ 6.623338] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 6.624448] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 6.624451] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 6.624453] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000000
[ 6.624455] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[ 6.624458] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011362 00020010
[ 6.624459] [drm] nouveau 0000:01:00.0: DCB outp 03: 04022310 00000000
[ 6.624461] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[ 6.624464] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161
[ 6.624466] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200
[ 6.624471] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x72B1
[ 6.630712] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 6.645801] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input14
[ 6.645934] usbcore: registered new interface driver uvcvideo
[ 6.645936] USB Video Class driver (1.1.1)
[ 6.674634] [drm] nouveau 0000:01:00.0: 0x78BC: Condition still not met after 20ms, skipping following opcodes
[ 6.674647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7925
[ 6.681550] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x890E
[ 6.681552] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x890F
[ 6.681598] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8A00
[ 6.681600] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8A65
[ 6.701604] [drm] nouveau 0000:01:00.0: 0x726F: Condition still not met after 20ms, skipping following opcodes
[ 6.702369] [drm] nouveau 0000:01:00.0: 2 available performance level(s)
[ 6.702373] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz timing 3 voltage 900mV
[ 6.702376] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 600MHz timing 4 voltage 1040mV
[ 6.702466] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz voltage 900mV
[ 6.704823] [TTM] Zone kernel: Available graphics memory: 364160 kiB.
[ 6.704825] [TTM] Zone highmem: Available graphics memory: 1747940 kiB.
[ 6.704826] [TTM] Initializing pool allocator.
[ 6.704835] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[ 6.704841] mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
[ 6.704852] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 6.707293] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.707295] [drm] No driver support for vblank timestamp query.
[ 6.785165] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0xe0000, bo ee6a1400
[ 6.785241] fbcon: nouveaufb (fb0) is primary device
[ 6.847105] [drm] nouveau 0000:01:00.0: EvoCh: chid 0 mthd 0x0708 data 0x31ec6000 0x00004708 0x00002000
[ 6.870292] Console: switching to colour frame buffer device 160x64
[ 6.875932] fb0: nouveaufb frame buffer device
[ 6.875933] drm: registered panic notifier
[ 6.875937] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 8.074070] tpm_tis 00:09: Adjusting TPM timeout parameters.
[ 8.872097] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.872152] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.036912] SQUASHFS error: Can't find a SQUASHFS superblock on sdc
[ 10.043785] VFS: Can't find a romfs filesystem on dev sdc.
[ 16.009347] aufs test_add:261:mount[2546]: uid/gid/perm /branches/fmu 0/0/0755, 0/0/01777
[ 16.009352] aufs test_add:261:mount[2546]: uid/gid/perm /branches/sqfs 0/0/0755, 0/0/01777
[ 18.104858] mdadm: sending ioctl 1261 to a partition!
[ 18.104863] mdadm: sending ioctl 1261 to a partition!
[ 18.104869] mdadm: sending ioctl 1261 to a partition!
[ 18.104875] mdadm: sending ioctl 1261 to a partition!
[ 18.105000] mdadm: sending ioctl 1261 to a partition!
[ 18.105014] mdadm: sending ioctl 1261 to a partition!
[ 18.105021] mdadm: sending ioctl 1261 to a partition!
[ 18.105029] mdadm: sending ioctl 1261 to a partition!
[ 18.105136] mdadm: sending ioctl 1261 to a partition!
[ 18.105140] mdadm: sending ioctl 1261 to a partition!
[ 18.579398] fuse init (API version 7.18)
[ 18.842813] device-mapper: uevent: version 1.0.3
[ 18.843010] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 19.315147] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 23.866337] dmeventd (4000): /proc/4000/oom_adj is deprecated, please use /proc/4000/oom_score_adj instead.
[ 27.942720] scsi_verify_blk_ioctl: 38 callbacks suppressed
[ 27.942723] disktype: sending ioctl 5305 to a partition!
[ 27.942725] disktype: sending ioctl 5305 to a partition!
[ 28.933426] Bluetooth: Core ver 2.16
[ 28.933443] NET: Registered protocol family 31
[ 28.933444] Bluetooth: HCI device and connection manager initialized
[ 28.933480] Bluetooth: HCI socket layer initialized
[ 28.933482] Bluetooth: L2CAP socket layer initialized
[ 28.933486] Bluetooth: SCO socket layer initialized
[ 29.069861] Bluetooth: RFCOMM TTY layer initialized
[ 29.069865] Bluetooth: RFCOMM socket layer initialized
[ 29.069867] Bluetooth: RFCOMM ver 1.11
[ 29.355319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.355322] Bluetooth: BNEP filters: protocol multicast
[ 29.441656] NET: Registered protocol family 10
[ 29.485117] Bridge firewalling registered
[ 39.015846] r8169 0000:04:00.0: eth0: link down
[ 39.015955] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.510721] r8169 0000:05:00.0: eth1: link down
[ 49.510728] r8169 0000:05:00.0: eth1: link down
[ 49.510840] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 51.898257] r8169 0000:05:00.0: eth1: link up
[ 51.898385] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 62.418007] eth1: no IPv6 routers present
[ 163.452872] console [netcon0] enabled
[ 163.454596] netconsole: network logging started
[ 197.293619] [drm] nouveau 0000:01:00.0: PDISP: DCB for 6/0xbad00103 not found
[ 197.293619] [drm] nouveau 0000:01:00.0: PDISP: DCB for 0/0xbad00103 not found
[ 197.293619] [drm] nouveau 0000:01:00.0: Table 0x0103 not found for 0/2, using first
[ 199.320529] BUG: unable to handle kernel paging request at a8916100
[ 199.320608] IP: [<f01adde9>] nv50_display_flip_next+0x54c/0x1c60 [nouveau]
[ 199.320673] *pde = 00000000
[ 199.320698] Oops: 0002 [#1] SMP
[ 199.320730] Modules linked in: netconsole bridge ipv6 stp llc bnep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss rfcomm bluetooth rfkill nfsd exportfs dm_mod fuse vfat fat tpm_infineon uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi nouveau ttm drm_kms_helper drm snd_hda_codec_realtek snd_hda_intel snd_hda_codec ppdev mxm_wmi snd_usb_audio parport_pc ata_generic psmouse video pata_acpi snd_pcm tpm_tis intel_agp firewire_ohci tpm intel_gtt uas usbhid hid snd_hwdep snd_usbmidi_lib snd_rawmidi snd_seq_device processor mac_hid sg usb_storage thermal_sys evdev tpm_bios wmi r8169 parport rtc_cmos hwmon firewire_core mii pata_jmicron uhci_hcd i2c_i801 serio_raw snd_timer agpgart snd ahci button libahci ehci_hcd soundcore snd_page_alloc
[ 199.321010]
[ 199.321010] Pid: 5211, comm: Xorg Tainted: G W 3.3.6-pmagic #1 Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P
[ 199.321010] EIP: 0060:[<f01adde9>] EFLAGS: 00213246 CPU: 2
[ 199.321010] EIP is at nv50_display_flip_next+0x54c/0x1c60 [nouveau]
[ 199.321010] EAX: edc16000 EBX: 00000002 ECX: 00000000 EDX: 2eb40040
[ 199.321010] ESI: ee250400 EDI: ee6bfb00 EBP: eddabd58 ESP: eddabd44
[ 199.321010] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 199.321010] Process Xorg (pid: 5211, ti=eddaa000 task=e974ee80 task.ti=eddaa000)
[ 199.321010] Stack:
[ 199.321010] 00000008 00642000 ee6bfb28 ee2bc000 00000000 eddabd68 f01af547 ee2bc000
[ 199.321010] 00000000 eddabd80 f01afb80 00000000 eddabe3c ee6a1c7c f01ba6e8 eddabe10
[ 199.321010] f00afe3f ee6a1c7c 00000002 0000000c f00970e1 f009a8bc ee2be004 c11b6d07
[ 199.321010] Call Trace:
[ 199.321010] [<f01af547>] nvd0_display_flip_stop+0x31/0x294 [nouveau]
[ 199.321010] [<f01afb80>] nvd0_display_flip_next+0x3d6/0x970 [nouveau]
[ 199.321010] [<f00afe3f>] drm_crtc_helper_set_config+0x68e/0x847 [drm_kms_helper]
[ 199.321010] [<c11b6d07>] ? vsnprintf+0x20f/0x266
[ 199.321010] [<f00887f2>] drm_mode_setcrtc+0x29d/0x2d6 [drm]
[ 199.321010] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm]
[ 199.321010] [<f007df2a>] drm_ioctl+0x270/0x32f [drm]
[ 199.321010] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm]
[ 199.321010] [<c1059149>] ? timekeeping_get_ns+0x10/0x47
[ 199.321010] [<f007dcba>] ? drm_getsarea+0x112/0x112 [drm]
[ 199.321010] [<c10d528c>] vfs_ioctl+0x20/0x2a
[ 199.321010] [<c10d5c40>] do_vfs_ioctl+0x404/0x442
[ 199.321010] [<c105e660>] ? clockevents_program_event+0xee/0x10b
[ 199.321010] [<c105f4db>] ? tick_program_event+0x24/0x29
[ 199.321010] [<c1041a30>] ? hrtimer_interrupt+0x11d/0x1ac
[ 199.321010] [<c10ca5e3>] ? fput+0x18/0x164
[ 199.321010] [<c10d5cbc>] sys_ioctl+0x3e/0x62
[ 199.321010] [<c137436c>] syscall_call+0x7/0xb
[ 199.321010] Code: 0c 89 c2 89 45 f0 89 f0 89 4d ec e8 9c ff ff ff 8b 4d ec 89 c2 c1 ea 02 01 d1 81 f9 ff 03 00 00 76 66 6b c3 14 31 c9 8b 44 07 10 <c7> 04 90 00 00 00 20 8b 55 f0 89 f0 e8 85 ff ff ff 89 d8 ba 00
[ 199.321010] EIP: [<f01adde9>] nv50_display_flip_next+0x54c/0x1c60 [nouveau] SS:ESP 0068:eddabd44
[ 199.321010] CR2: 00000000a8916100
[ 360.454032] INFO: task kworker/1:1:343 blocked for more than 120 seconds.
[ 360.454103] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.454172] kworker/1:1 D ea0a7180 0 343 2 0x00000000
[ 360.454232] ea2b1edc 00000046 c15919c0 ea0a7180 c15919c0 c104e36a c15919c0 00000000
[ 360.454373] ea2b1f08 ea2ac400 eaf459c0 4e575a10 00000002 00000000 00000400 00989680
[ 360.454515] c15919c0 00989680 ea2ac434 00000030 4e575a10 00000002 eaf459c0 eaf41c40
[ 360.454660] Call Trace:
[ 360.454700] [<c104e36a>] ? load_balance+0x53/0x4db
[ 360.454742] [<c101e7f6>] ? default_spin_lock_flags+0x8/0xe
[ 360.454786] [<c13739fe>] schedule+0x4e/0x50
[ 360.454819] [<c1372e2e>] __mutex_lock_common.isra.6+0x12b/0x145
[ 360.454873] [<c1372ebb>] __mutex_lock_slowpath+0x12/0x14
[ 360.454922] [<c1372c72>] mutex_lock+0x1d/0x2a
[ 360.454965] [<f00aee14>] ? drm_format_num_planes+0x87/0x1ac [drm_kms_helper]
[ 360.455030] [<f00aee3f>] drm_format_num_planes+0xb2/0x1ac [drm_kms_helper]
[ 360.455082] [<c103233b>] ? add_timer+0x17/0x19
[ 360.455117] [<c1063b7b>] ? do_raw_spin_lock+0x8/0xb
[ 360.455162] [<c103ab31>] process_one_work+0x10a/0x238
[ 360.455202] [<f00aee14>] ? drm_format_num_planes+0x87/0x1ac [drm_kms_helper]
[ 360.457773] [<c103ae77>] worker_thread+0xbb/0x150
[ 360.460361] [<c103adbc>] ? rescuer_thread+0x137/0x137
[ 360.462918] [<c103e2eb>] kthread+0x6c/0x71
[ 360.465485] [<c103e27f>] ? flush_kthread_worker+0x79/0x79
[ 360.467984] [<c13757be>] kernel_thread_helper+0x6/0x10
[ 360.470453] INFO: task Xorg:5211 blocked for more than 120 seconds.
[ 360.472846] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.475219] Xorg D c107d0ef 0 5211 4613 0x00400004
[ 360.477571] eddab9a0 00203082 eddab944 c107d0ef c15919c0 00000000 c15919c0 00000000
[ 360.479945] c102cd61 e974ee80 c1018122 ee250648 e974ee80 eddab9a8 c1374d4d ee250648
[ 360.482344] e974ee80 e974ee80 e974ee80 00000002 eddab9a8 00000000 e974007b ee63007b
[ 360.484737] Call Trace:
[ 360.486975] [<c107d0ef>] ? rcu_irq_exit+0x66/0x6b
[ 360.489235] [<c102cd61>] ? irq_exit+0x85/0x87
[ 360.491466] [<c1018122>] ? smp_apic_timer_interrupt+0x63/0x71
[ 360.493725] [<c1374d4d>] ? apic_timer_interrupt+0x31/0x38
[ 360.495964] [<c13739fe>] schedule+0x4e/0x50
[ 360.498193] [<c1372e2e>] __mutex_lock_common.isra.6+0x12b/0x145
[ 360.500416] [<c1372ebb>] __mutex_lock_slowpath+0x12/0x14
[ 360.502611] [<c1372c72>] mutex_lock+0x1d/0x2a
[ 360.504790] [<f00ad4f3>] drm_fb_helper_pan_display+0x2b/0x9a [drm_kms_helper]
[ 360.507010] [<c11dbbaf>] fb_pan_display+0xe2/0x11d
[ 360.509198] [<c11e7b35>] bit_update_start+0x1a/0x36
[ 360.511383] [<c11e5caf>] fbcon_switch+0x3a1/0x418
[ 360.513561] [<c122b1e8>] redraw_screen+0xc4/0x155
[ 360.515722] [<c11e6f7f>] fbcon_blank+0x1cb/0x216
[ 360.517865] [<c101e7f6>] ? default_spin_lock_flags+0x8/0xe
[ 360.520039] [<c13740b8>] ? _raw_spin_unlock_irqrestore+0x17/0x1a
[ 360.522195] [<c13740b8>] ? _raw_spin_unlock_irqrestore+0x17/0x1a
[ 360.524334] [<c1028281>] ? console_unlock+0x1ac/0x1b4
[ 360.526485] [<c1028696>] ? vprintk+0x323/0x354
[ 360.528623] [<c122c704>] do_unblank_screen+0xd4/0x139
[ 360.530755] [<c122c778>] unblank_screen+0xf/0x11
[ 360.532886] [<c11b941f>] bust_spinlocks+0x13/0x28
[ 360.535043] [<c10053f4>] oops_end+0x15/0x85
[ 360.537170] [<c136ed2a>] no_context+0x15b/0x165
[ 360.539293] [<c136ee2f>] __bad_area_nosemaphore+0xfb/0x105
[ 360.541435] [<c136eff5>] bad_area+0x3a/0x40
[ 360.543585] [<c101efaa>] do_page_fault+0x1a2/0x318
[ 360.545727] [<c104e36a>] ? load_balance+0x53/0x4db
[ 360.547880] [<c101ee08>] ? vmalloc_sync_all+0x98/0x98
[ 360.549961] [<c1374f7b>] error_code+0x67/0x6c
[ 360.551983] [<f01adde9>] ? nv50_display_flip_next+0x54c/0x1c60 [nouveau]
[ 360.553969] [<f01af547>] nvd0_display_flip_stop+0x31/0x294 [nouveau]
[ 360.555938] [<f01afb80>] nvd0_display_flip_next+0x3d6/0x970 [nouveau]
[ 360.557904] [<f00afe3f>] drm_crtc_helper_set_config+0x68e/0x847 [drm_kms_helper]
[ 360.559874] [<c11b6d07>] ? vsnprintf+0x20f/0x266
[ 360.561809] [<f00887f2>] drm_mode_setcrtc+0x29d/0x2d6 [drm]
[ 360.563755] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm]
[ 360.565678] [<f007df2a>] drm_ioctl+0x270/0x32f [drm]
[ 360.567603] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm]
[ 360.569506] [<c1059149>] ? timekeeping_get_ns+0x10/0x47
[ 360.571416] [<f007dcba>] ? drm_getsarea+0x112/0x112 [drm]
[ 360.573324] [<c10d528c>] vfs_ioctl+0x20/0x2a
[ 360.575226] [<c10d5c40>] do_vfs_ioctl+0x404/0x442
[ 360.577124] [<c105e660>] ? clockevents_program_event+0xee/0x10b
[ 360.579036] [<c105f4db>] ? tick_program_event+0x24/0x29
[ 360.580939] [<c1041a30>] ? hrtimer_interrupt+0x11d/0x1ac
[ 360.582852] [<c10ca5e3>] ? fput+0x18/0x164
[ 360.584729] [<c10d5cbc>] sys_ioctl+0x3e/0x62
[ 360.586599] [<c137436c>] syscall_call+0x7/0xb
 
Old 06-01-2012, 06:47 AM
Jonathan Nieder
 
Default Bug#675302: nouveau: hard lockup when gdm3 starts

Gedalya wrote:

> Here.

Perfect, thanks much.

Ok, one more test and we should take this upstream: can you reproduce
this with a 3.3.y or newer kernel from experimental?

If so, please report this at <http://bugs.freedesktop.org/>, product
Xorg, component Driver/nouveau (yes, that's where they track their
kernel bugs, too), and let us know the bug number so we can track it.

http://nouveau.freedesktop.org/wiki/Bugs has more advice. xterm uses
2d, GNOME 3 uses some 3d features.

Hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120601064714.GD28116@burratino">http://lists.debian.org/20120601064714.GD28116@burratino
 

Thread Tools




All times are GMT. The time now is 07:45 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org