Package: linux-2.6
Version: 3.3.4-1~experimental.1
Severity: important


Hi,

I have a problem loading KVM:

# lsmod|grep kvm
kvm 240621 0
# modprobe kvm_intel
FATAL: Error inserting kvm_intel (/lib/modules/3.3.0-trunk-686-pae/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
# modprobe kvm_amd
FATAL: Error inserting kvm_amd (/lib/modules/3.3.0-trunk-686-pae/kernel/arch/x86/kvm/kvm-amd.ko): Operation not supported
#


But my CPU should be able to do it:

# egrep '^(flags.*(vmx|svm)|model name)' /proc/cpuinfo
model name : AMD Phenom(tm) II X4 945 Processor
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
model name : AMD Phenom(tm) II X4 945 Processor
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
model name : AMD Phenom(tm) II X4 945 Processor
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
model name : AMD Phenom(tm) II X4 945 Processor
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save



Therefore, KVM runs like a dead snail on my machine.

Didn't try Xen yet...



Kind regards,
--Toni++





-- Package-specific info:
** Version:
Linux version 3.3.0-trunk-686-pae (Debian 3.3.4-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Wed May 2 12:54:40 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-3.3.0-trunk-686-pae root=/dev/mapper/ev0-root ro root=/dev/mapper/ev0-root ro

** Not tainted

** Kernel log:
[ 153.733778] Bluetooth: Core ver 2.16
[ 153.742581] NET: Registered protocol family 31
[ 153.747740] Bluetooth: HCI device and connection manager initialized
[ 153.752916] Bluetooth: HCI socket layer initialized
[ 153.758127] Bluetooth: L2CAP socket layer initialized
[ 153.763195] Bluetooth: SCO socket layer initialized
[ 153.933263] Bluetooth: RFCOMM TTY layer initialized
[ 153.944450] Bluetooth: RFCOMM socket layer initialized
[ 153.952750] Bluetooth: RFCOMM ver 1.11
[ 154.027012] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 154.035306] Bluetooth: BNEP filters: protocol multicast
[ 155.166515] Ebtables v2.0 registered
[ 155.245662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 157.655480] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96)
[ 157.664126] drbd: srcversion: 0D2B62DEDB020A425130935
[ 157.672894] drbd: registered as block device major 147
[ 157.681610] drbd: minor_table @ 0xeb853d40
[14788.207717] tun: Universal TUN/TAP device driver, 1.6
[14788.207726] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[16181.480593] device vnet0 entered promiscuous mode
[16181.488245] br0: port 2(vnet0) entered forwarding state
[16181.488287] br0: port 2(vnet0) entered forwarding state
[16181.601939] br0: port 2(vnet0) entered disabled state
[16181.602978] br0: port 2(vnet0) entered disabled state
[16181.603091] device vnet0 left promiscuous mode
[16181.603098] br0: port 2(vnet0) entered disabled state
[16254.527370] device vnet0 entered promiscuous mode
[16254.528979] br0: port 2(vnet0) entered forwarding state
[16254.528987] br0: port 2(vnet0) entered forwarding state
[16263.552030] br0: port 2(vnet0) entered forwarding state
[16320.995768] br0: port 2(vnet0) entered disabled state
[16320.996868] br0: port 2(vnet0) entered disabled state
[16320.996970] device vnet0 left promiscuous mode
[16320.996978] br0: port 2(vnet0) entered disabled state
[16580.856224] device vnet0 entered promiscuous mode
[16580.871339] br0: port 2(vnet0) entered forwarding state
[16580.871363] br0: port 2(vnet0) entered forwarding state
[16581.002228] br0: port 2(vnet0) entered disabled state
[16581.003222] br0: port 2(vnet0) entered disabled state
[16581.003323] device vnet0 left promiscuous mode
[16581.003330] br0: port 2(vnet0) entered disabled state
[17567.388525] device vnet0 entered promiscuous mode
[17567.389940] br0: port 2(vnet0) entered forwarding state
[17567.389950] br0: port 2(vnet0) entered forwarding state
[17567.590121] br0: port 2(vnet0) entered disabled state
[17567.591368] br0: port 2(vnet0) entered disabled state
[17567.591494] device vnet0 left promiscuous mode
[17567.591501] br0: port 2(vnet0) entered disabled state
[17804.536145] device vnet0 entered promiscuous mode
[17804.552705] br0: port 2(vnet0) entered forwarding state
[17804.552730] br0: port 2(vnet0) entered forwarding state
[17813.568033] br0: port 2(vnet0) entered forwarding state
[17930.258956] br0: port 2(vnet0) entered disabled state
[17930.259965] br0: port 2(vnet0) entered disabled state
[17930.260107] device vnet0 left promiscuous mode
[17930.260115] br0: port 2(vnet0) entered disabled state
[17934.032102] device vnet0 entered promiscuous mode
[17934.044217] br0: port 2(vnet0) entered forwarding state
[17934.044241] br0: port 2(vnet0) entered forwarding state
[17943.072039] br0: port 2(vnet0) entered forwarding state
[18046.631114] br0: port 2(vnet0) entered disabled state
[18046.632213] br0: port 2(vnet0) entered disabled state
[18046.632378] device vnet0 left promiscuous mode
[18046.632386] br0: port 2(vnet0) entered disabled state
[18048.744071] device vnet0 entered promiscuous mode
[18048.748720] br0: port 2(vnet0) entered forwarding state
[18048.748744] br0: port 2(vnet0) entered forwarding state
[18057.760017] br0: port 2(vnet0) entered forwarding state
[18072.876794] br0: port 2(vnet0) entered disabled state
[18072.877911] br0: port 2(vnet0) entered disabled state
[18072.878010] device vnet0 left promiscuous mode
[18072.878018] br0: port 2(vnet0) entered disabled state
[18108.751208] device vnet0 entered promiscuous mode
[18108.752310] br0: port 2(vnet0) entered forwarding state
[18108.752321] br0: port 2(vnet0) entered forwarding state
[18117.760009] br0: port 2(vnet0) entered forwarding state
[20916.731037] br0: port 2(vnet0) entered disabled state
[20916.732093] br0: port 2(vnet0) entered disabled state
[20916.732211] device vnet0 left promiscuous mode
[20916.732219] br0: port 2(vnet0) entered disabled state
[20918.913053] device vnet0 entered promiscuous mode
[20918.916619] br0: port 2(vnet0) entered forwarding state
[20918.916642] br0: port 2(vnet0) entered forwarding state
[20927.936009] br0: port 2(vnet0) entered forwarding state
[20942.963441] br0: port 2(vnet0) entered disabled state
[20942.964509] br0: port 2(vnet0) entered disabled state
[20942.964627] device vnet0 left promiscuous mode
[20942.964634] br0: port 2(vnet0) entered disabled state
[20945.216050] device vnet0 entered promiscuous mode
[20945.219926] br0: port 2(vnet0) entered forwarding state
[20945.219949] br0: port 2(vnet0) entered forwarding state
[20954.240039] br0: port 2(vnet0) entered forwarding state
[21052.623069] kvm: disabled by bios
[21079.382451] kvm: disabled by bios
[21087.836483] kvm: no hardware support
[44288.402984] soffice.bin[1434]: segfault at b31298ac ip b60cd835 sp bf8a8aa0 error 4 in libvclli.so[b5e88000+4ba000]
[46247.706644] kvm: no hardware support
[46250.361237] kvm: disabled by bios
[46258.454833] kvm: disabled by bios
[46261.417072] kvm: no hardware support

** Model information
not available

** Loaded modules:
tun
snd_hrtimer
xt_multiport
binfmt_misc
drbd
lru_cache
cn
ip6table_filter
ip6_tables
ebtable_nat
ebtables
bnep
rfcomm
bluetooth
rfkill
crc16
battery
parport_pc
ppdev
lp
parport
powernow_k8
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
xfrm_user
xfrm4_tunnel
ipcomp
xfrm_ipcomp
esp4
ah4
iptable_filter
ip_tables
x_tables
sit
tunnel4
bridge
stp
deflate
zlib_deflate
ctr
twofish_generic
twofish_i586
twofish_common
camellia
serpent_sse2_i586
lrw
serpent_generic
xts
gf128mul
blowfish_generic
blowfish_common
cast5
des_generic
xcbc
rmd160
sha512_generic
sha1_generic
hmac
crypto_null
af_key
fuse
wacom
loop
kvm
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
radeon
ttm
sp5100_tco
drm_kms_helper
drm
snd_hwdep
i2c_piix4
i2c_algo_bit
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
evdev
asus_atk0110
tpm_tis
tpm
tpm_bios
i2c_core
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
snd_seq_device
pcspkr
snd
soundcore
k10temp
wmi
snd_page_alloc
shpchp
processor
thermal_sys
button
ext3
jbd
mbcache
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
dm_mod
raid1
md_mod
usbhid
hid
power_supply
sg
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
pata_atiixp
ohci_hcd
ehci_hcd
ahci
libahci
libata
usbcore
usb_common
scsi_mod
r8169
mii
e1000e

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: ASUSTeK Computer Inc. RS880 PCI to PCI bridge (int gfx) [1043:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe8f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe8ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:841b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8f6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD 4250] [1002:9715] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at feae0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon

01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at feaf4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=32]
Region 3: Memory at febdc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at feb80000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c03f Logitech, Inc. M-BT85 [UltraX Optical Mouse]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates'), (450, 'testing'), (250, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.3.0-trunk-686-pae (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.3.0-trunk-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.5 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo

Versions of packages linux-image-3.3.0-trunk-686-pae recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
ii libc6-i686 2.11.3-3 Embedded GNU C Library: Shared lib

Versions of packages linux-image-3.3.0-trunk-686-pae suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.3 <none> (no description available)

Versions of packages linux-image-3.3.0-trunk-686-pae is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.35~bpo60+1 Binary firmware for various driver
ii firmware-linux-nonfree 0.35~bpo60+1 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii firmware-realtek 0.28+squeeze1 Binary firmware for Realtek wired
ii xen-hypervisor-4.0-amd64 [ 4.0.1-4 The Xen Hypervisor on AMD64

-- debconf information:
* linux-image-3.3.0-trunk-686-pae/postinst/missing-firmware-3.3.0-trunk-686-pae:
linux-image-3.3.0-trunk-686-pae/prerm/removing-running-kernel-3.3.0-trunk-686-pae: true
linux-image-3.3.0-trunk-686-pae/postinst/depmod-error-initrd-3.3.0-trunk-686-pae: false
linux-image-3.3.0-trunk-686-pae/postinst/ignoring-ramdisk:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120515214216.5552.17821.reportbug@spruce.wiehl.o eko.net">http://lists.debian.org/20120515214216.5552.17821.reportbug@spruce.wiehl.o eko.net