FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 04-04-2012, 10:46 PM
Steven Sciame
 
Default Bug#667567: linux: When connecting to external monitor, screen is "jerky" as soon as X loads.

Package: linux-2.6
Version: 2.6.32-41squeeze2
Severity: normal
File: linux


Whenever I connect to an external monitor, the image "jerks" around and
flickers as soon as X starts to load. The pre-boot looks fine including
picking a kernel to load. As soon as X loads is where the trouble starts.

If I use a different kernel, 2.6.38 (compiled from kernel.org) then the
problem goes away. This only happens with the "stock" kernel (2.6.32-5-686)


-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 26 05:20:33 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c12d7448-3eb9-4c84-b82b-442573f5ac9e ro quiet

** Not tainted

** Kernel log:
[ 5.784176] ACPI: Battery Slot [BAT0] (battery present)
[ 5.784304] ACPI: WMI: Mapper loaded
[ 5.786326] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 5.786501] ACPI: Lid Switch [LID0]
[ 5.786595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 5.786639] ACPI: Power Button [PWRB]
[ 5.786750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.786786] ACPI: Power Button [PWRF]
[ 5.874096] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 5.909873] intel_rng: FWH not detected
[ 5.953273] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.356830] [drm] Initialized drm 1.1.0 20060810
[ 6.432581] yenta_cardbus 0000:02:05.0: CardBus bridge found [103c:3084]
[ 6.432603] yenta_cardbus 0000:02:05.0: Using CSCINT to route CSC interrupts to PCI
[ 6.432607] yenta_cardbus 0000:02:05.0: Routing CardBus interrupts to PCI
[ 6.432612] yenta_cardbus 0000:02:05.0: TI: mfunc 0x01111112, devctl 0x64
[ 6.563489] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 6.563497] i915 0000:00:02.0: setting latency timer to 64
[ 6.573198] [drm] set up 31M of stolen space
[ 6.711428] [drm] initialized overlay support
[ 6.962455] yenta_cardbus 0000:02:05.0: ISA IRQ mask 0x00d8, PCI irq 11
[ 6.962461] yenta_cardbus 0000:02:05.0: Socket status: 30000006
[ 6.962467] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 6.962482] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 6.962487] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 6.962856] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 6.962860] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[ 7.639745] cfg80211: Using static regulatory domain info
[ 7.639750] cfg80211: Regulatory domain: US
[ 7.639752] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.639757] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.639762] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.639766] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.639770] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.639775] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.639779] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.640236] cfg80211: Calling CRDA for country: US
[ 7.715811] Console: switching to colour frame buffer device 128x48
[ 7.723763] fb0: inteldrmfb frame buffer device
[ 7.723767] registered panic notifier
[ 7.749061] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.859278] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 7.907109] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.909215] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 7.909930] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.910522] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.911298] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.292355] phy0: Selected rate control algorithm 'minstrel'
[ 8.293451] Registered led device: b43-phy0::tx
[ 8.293475] Registered led device: b43-phy0::rx
[ 8.293503] Registered led device: b43-phy0::radio
[ 8.293613] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 8.360861] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.360900] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 8.680050] intel8x0_measure_ac97_clock: measured 54172 usecs (2610 samples)
[ 8.680054] intel8x0: clocking to 48000
[ 8.681050] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.681073] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 9.036074] MC'97 0 converters and GPIO not ready (0x1)
[ 9.906136] Adding 1413680k swap on /dev/sda5. Priority:-1 extents:1 across:1413680k
[ 10.079794] EXT3 FS on sda1, internal journal
[ 10.245012] loop: module loaded
[ 12.077260] fuse init (API version 7.13)
[ 13.416855] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 14.728245] eth0: link down
[ 14.728342] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.756051] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 14.988933] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 15.099228] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 15.125271] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 15.288056] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 15.340971] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.302786] apm: BIOS not found.
[ 18.831250] Bluetooth: Core ver 2.15
[ 18.831352] NET: Registered protocol family 31
[ 18.831355] Bluetooth: HCI device and connection manager initialized
[ 18.831360] Bluetooth: HCI socket layer initialized
[ 18.887146] Bluetooth: L2CAP ver 2.14
[ 18.887151] Bluetooth: L2CAP socket layer initialized
[ 18.942511] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.942518] Bluetooth: BNEP filters: protocol multicast
[ 19.030343] Bridge firewalling registered
[ 19.037053] Bluetooth: RFCOMM TTY layer initialized
[ 19.037061] Bluetooth: RFCOMM socket layer initialized
[ 19.037065] Bluetooth: RFCOMM ver 1.11
[ 19.133716] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.133721] Bluetooth: SCO socket layer initialized
[ 21.411653] lp: driver loaded but no devices found
[ 21.772196] ppdev: user-space parallel port driver
[ 98.294826] wlan0: direct probe to AP 00:26:50:b4:e1:81 (try 1)
[ 98.296473] wlan0: direct probe responded
[ 98.296480] wlan0: authenticate with AP 00:26:50:b4:e1:81 (try 1)
[ 98.298184] wlan0: authenticated
[ 98.298217] wlan0: associate with AP 00:26:50:b4:e1:81 (try 1)
[ 98.496064] wlan0: associate with AP 00:26:50:b4:e1:81 (try 2)
[ 98.500841] wlan0: RX AssocResp from 00:26:50:b4:e1:81 (capab=0x31 status=0 aid=1)
[ 98.500848] wlan0: associated
[ 98.501308] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 98.501389] cfg80211: Calling CRDA for country: US
[ 108.800047] wlan0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module Size Used by
cpufreq_stats 1997 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
rfcomm 25131 0
bridge 32895 0
stp 996 1 bridge
bnep 7384 2
l2cap 21721 6 rfcomm,bnep
crc16 1027 1 l2cap
bluetooth 36251 6 sco,rfcomm,bnep,l2cap
binfmt_misc 4875 1
uinput 4796 1
fuse 44064 1
loop 9733 0
snd_intel8x0m 8100 0
snd_intel8x0 19595 3
snd_ac97_codec 79200 2 snd_intel8x0m,snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
arc4 974 2
snd_pcm 47226 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
ecb 1405 2
snd_seq 35327 0
b43 132415 0
mac80211 122874 1 b43
snd_timer 12270 2 snd_pcm,snd_seq
cfg80211 86965 2 b43,mac80211
snd_seq_device 3673 1 snd_seq
rfkill 10196 4 bluetooth,cfg80211
i915 222702 2
drm_kms_helper 18533 1 i915
yenta_socket 16403 1
rsrc_nonstatic 7057 1 yenta_socket
led_class 1757 1 b43
drm 111849 3 i915,drm_kms_helper
snd 34387 13 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm, snd_seq,snd_timer,snd_seq_device
i2c_algo_bit 3493 1 i915
shpchp 21200 0
i2c_i801 6462 0
joydev 6739 0
soundcore 3450 1 snd
i2c_core 12751 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
video 14605 1 i915
rng_core 2178 1 b43
snd_page_alloc 4977 3 snd_intel8x0m,snd_intel8x0,snd_pcm
processor 26259 1
button 3598 1 i915
evdev 5609 19
pcspkr 1207 0
output 1204 1 video
wmi 3575 0
pci_hotplug 18545 1 shpchp
battery 3782 0
ac 1640 0
container 1833 0
psmouse 44777 0
serio_raw 2916 0
ext3 94020 1
jbd 32197 1 ext3
mbcache 3762 1 ext3
sg 19905 0
sr_mod 10770 0
cdrom 26435 1 sr_mod
sd_mod 25945 3
crc_t10dif 1012 1 sd_mod
ssb 33578 1 b43
ata_generic 2247 0
uhci_hcd 15989 0
mmc_core 38277 2 b43,ssb
8139too 14849 0
ata_piix 17704 2
pcmcia 16194 2 b43,ssb
8139cp 13285 0
libata 115649 2 ata_generic,ata_piix
thermal 9206 0
ehci_hcd 28449 0
mii 2714 2 8139too,8139cp
pcmcia_core 20414 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
scsi_mod 104765 4 sg,sr_mod,sd_mod,libata
usbcore 99125 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:c0:9f:50:0d:09 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:90:4b:95:ee:25 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.101/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::290:4bff:fe95:ee25/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 8e:d4:78:9a:55:f6 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 27449 130 0 0 0 0 0 0 27449 130 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 25809 252 0 0 0 0 0 0 20776 149 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
147 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
146 incoming packets delivered
153 requests sent out
4 outgoing packets dropped
Icmp:
12 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 12
12 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 12
IcmpMsg:
InType3: 12
OutType3: 12
Tcp:
6 active connections openings
0 passive connection openings
4 failed connection attempts
0 connection resets received
1 connections established
20 segments received
20 segments send out
0 segments retransmited
0 bad segments received.
4 resets sent
Udp:
105 packets received
12 packets to unknown port received.
0 packet receive errors
123 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
5 packet headers predicted
3 acknowledgments not containing data payload received
IpExt:
InMcastPkts: 15
OutMcastPkts: 17
InBcastPkts: 19
OutBcastPkts: 18
InOctets: 25272
OutOctets: 14501
InMcastOctets: 2931
OutMcastOctets: 3011
InBcastOctets: 3244
OutBcastOctets: 2916


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 20000000-23ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 24000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at e0202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too

02:05.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

02:06.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Hewlett-Packard Company Broadcom 802.11b/g WLAN [103c:12f8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41squeeze2 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-41squeeze2 Binary firmware for various driver
ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120404224638.2098.13291.reportbug@debtop">http://lists.debian.org/20120404224638.2098.13291.reportbug@debtop
 

Thread Tools




All times are GMT. The time now is 09:22 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org