Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#667446: linux-image-3.2.0-2-orion5x: leds-gpio fails on MV2120 (http://www.linux-archive.org/debian-kernel/652459-bug-667446-linux-image-3-2-0-2-orion5x-leds-gpio-fails-mv2120.html)

Henry von Tresckow 01-01-1970 01:00 AM

Bug#667446: linux-image-3.2.0-2-orion5x: leds-gpio fails on MV2120
 
Package: linux-2.6
Version: 3.2.12-1
Severity: normal

During Bootup, the leds-gpio initalization fails with the following error message:

leds-gpio: probe of leds-gpio failed with error -22

Only the power led stays lit. The /sys/class/leds directory is also empty.






-- Package-specific info:
** Version:
Linux version 3.2.0-2-orion5x (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 Thu Mar 22 03:54:01 UTC 2012

** Command line:
console=ttyS0,115200 root=/dev/md0 ro BOOT_MODE=normal runintime=13000 serialNo=CN68110K3H

** Not tainted

** Kernel log:
[ 12.680997] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
[ 12.688480] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
[ 12.695918] rtc-pcf8563 0-0051: retrieved date/time is not valid.
[ 12.702508] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 12.709626] Registered led device: mv2120:blue:health
[ 12.709882] Registered led device: mv2120:red:health
[ 12.710120] Registered led device: mv2120:led:bright
[ 12.710357] Registered led device: mv2120:led:dimmed
[ 12.710627] Registered led device: mv2120:red:sata0
[ 12.711476] leds-gpio: probe of leds-gpio failed with error -22
[ 12.719263] TCP cubic registered
[ 12.722558] NET: Registered protocol family 17
[ 12.727025] Registering the dns_resolver key type
[ 12.731875] VFP support v0.3: not present
[ 12.736937] registered taskstats version 1
[ 12.742752] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
[ 12.750141] rtc-pcf8563 0-0051: retrieved date/time is not valid.
[ 12.756267] rtc-pcf8563 0-0051: hctosys: invalid date/time
[ 12.761913] Initializing network drop monitor service
[ 12.768620] Freeing init memory: 140K
[ 12.985733] udevd[48]: starting version 175
[ 13.539871] SCSI subsystem initialized
[ 13.721327] libata version 3.00 loaded.
[ 13.726336] sata_mv sata_mv.0: version 1.28
[ 13.727399] sata_mv sata_mv.0: slots 32 ports 2
[ 13.789925] scsi0 : sata_mv
[ 13.799135] scsi1 : sata_mv
[ 13.806608] ata1: SATA max UDMA/133 irq 29
[ 13.810714] ata2: SATA max UDMA/133 irq 29
[ 14.321015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 14.361032] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 14.366604] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 14.431043] ata1.00: configured for UDMA/133
[ 14.436116] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 14.790967] ata2: SATA link down (SStatus 0 SControl 300)
[ 14.856637] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 14.867542] sd 0:0:0:0: [sda] Write Protect is off
[ 14.872401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.872733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.919769] sda: sda1 sda2 < sda5 >
[ 14.928971] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.475178] device-mapper: uevent: version 1.0.3
[ 15.484779] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 16.608932] kjournald starting. Commit interval 5 seconds
[ 16.614579] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 18.521715] udevd[194]: starting version 175
[ 19.241204] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 19.342251] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 19.349269] mv643xx_eth smi: probed
[ 19.514333] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:0a:e4:87:6e:27
[ 19.614814] usbcore: registered new interface driver usbfs
[ 19.620510] usbcore: registered new interface driver hub
[ 19.729908] usbcore: registered new device driver usb
[ 19.737956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.990610] alg: hash: Test 6 failed for mv-hmac-sha1
[ 19.995751] 00000000: 9a 5e 0d 81 ff f1 0b 69 3b 73 88 c8 d6 c9 13 d9
[ 20.002231] 00000010: 06 e3 53 3e
[ 20.054468] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 20.059848] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 20.141104] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[ 20.165456] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 20.189432] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.196295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.203549] usb usb1: Product: Marvell Orion EHCI
[ 20.208251] usb usb1: Manufacturer: Linux 3.2.0-2-orion5x ehci_hcd
[ 20.214460] usb usb1: SerialNumber: orion-ehci.0
[ 20.371115] hub 1-0:1.0: USB hub found
[ 20.406404] hub 1-0:1.0: 1 port detected
[ 20.421073] orion-ehci orion-ehci.1: Marvell Orion EHCI
[ 20.426391] orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
[ 20.521091] orion-ehci orion-ehci.1: irq 12, io mem 0xf10a0000
[ 20.571057] orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
[ 20.577137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.583997] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.591251] usb usb2: Product: Marvell Orion EHCI
[ 20.595953] usb usb2: Manufacturer: Linux 3.2.0-2-orion5x ehci_hcd
[ 20.602162] usb usb2: SerialNumber: orion-ehci.1
[ 20.685094] hub 2-0:1.0: USB hub found
[ 20.688893] hub 2-0:1.0: 1 port detected
[ 21.863824] EXT3-fs (dm-0): using internal journal
[ 22.151724] loop: module loaded
[ 26.396101] Adding 368636k swap on /dev/mapper/Beaker-swap_1. Priority:-1 extents:1 across:368636k
[ 27.204282] kjournald starting. Commit interval 5 seconds
[ 27.215081] EXT3-fs (dm-2): using internal journal
[ 27.219893] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 28.553095] NET: Registered protocol family 10
[ 29.112582] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.466637] RPC: Registered named UNIX socket transport module.
[ 29.472621] RPC: Registered udp transport module.
[ 29.477316] RPC: Registered tcp transport module.
[ 29.482046] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.556829] FS-Cache: Loaded
[ 29.671758] FS-Cache: Netfs 'nfs' registered for caching
[ 29.741971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 30.904374] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 30.914446] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.590965] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 41.690952] eth0: no IPv6 routers present
[ 43.064706] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 43.074614] NFSD: starting 90-second grace period

** Model information
Processor : Feroceon rev 0 (v5l)
Hardware : HP Media Vault mv2120
Revision : 0000

** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ipv6
ext2
loop
evdev
hmac
ehci_hcd
sha1_generic
usbcore
mv_cesa
usb_common
aes_generic
mv643xx_eth
gpio_keys
inet_lro
ext3
mbcache
jbd
dm_mod
sd_mod
crc_t10dif
sata_mv
libata
scsi_mod

** PCI devices:

** Sound cards:

-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: armel (armv5tel)

Kernel: Linux 3.2.0-2-orion5x
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-2-orion5x depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.101
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2

Versions of packages linux-image-3.2.0-2-orion5x recommends:
ii firmware-linux-free 3
ii uboot-mkimage 2011.12-2

Versions of packages linux-image-3.2.0-2-orion5x suggests:
pn fdutils <none>
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-2-orion5x is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-2-orion5x/postinst/missing-firmware-3.2.0-2-orion5x:
linux-image-3.2.0-2-orion5x/prerm/removing-running-kernel-3.2.0-2-orion5x: true
linux-image-3.2.0-2-orion5x/postinst/depmod-error-initrd-3.2.0-2-orion5x: false
linux-image-3.2.0-2-orion5x/postinst/ignoring-ramdisk:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 19700101015340.1901.23154.reportbug@Beaker.localne t">http://lists.debian.org/19700101015340.1901.23154.reportbug@Beaker.localne t


All times are GMT. The time now is 06:57 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.