FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-26-2012, 08:42 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Am Montag, 26. März 2012 schrieben Sie:
> found 665881 linux-2.6/3.2.12-1
> quit
>
> Hi Hans,
>
Hi Jonathan,

> Hans wrote:
> > Package: linux-2.6
> > Severity: important
>
> Thanks. Please specify a version number next time.
>
It is 3.2.0-2-amd64.

> [...]
>
> > [ 175.461616] ath5k phy0: gain calibration timeout (2462MHz)
> > [ 175.462671] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>
> Interesting. I'd never seen this message before, but a search of
> the linux-wireless yielded some hits.
>
> No great ideas from me. So:
>
> - please boot without the virtualbox drivers to rule them out as
> a cause
>

I did, but I got no success.

> - does unloading the acer_wmi driver help? (I wouldn't expect it
> to, but it seems worth a check.)
>

No, it does not help.

> - is "rfkill list" output as expected?
>

This is the output:

rfkill list
2: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


Seems ok for me.

> - you mentioned that with some earlier 3.2.y kernel you had similar
> problems, though there was a workaround. May I assume that
> earlier kernels worked fine? Of the kernels listed at
> <http://snapshot.debian.org/package/linux-2.6/>, which is the
> newest version that works without problems?
>

Yes, with kernel 3.1.X everything went fine. I did not downgrade at the moment,
as I need this machine all the time and can not do much experiences during the
day.

> - please file a separate bug for the laptop with different hardware.
>

Yes, I will do, when this problem is fixed and is still on the other machine. I
just wanted to mention it, as it might also be, there is still a problem
besides of ath5k.

> - does this always happen right away or only in some circumstances?
> (e.g., after a suspend/resume)
>

The problem is always happening.

> - can you reproduce this without using wicd? i.e.
>
> install iw and iproute
> stop wicd
> ip link set wlan0 up
> iw dev wlan0 connect -w <SSID> key d:0:<WEP key>
> dhclient wlan0
>
> with
>
> iw event -t
>
> running in another terminal to see if anything interesting happens.
>


Yes, same problem without wicd! My system is configured, that I also can run it
without wicd, but I am using wicd as it is more comfortable. But wicd indeed
is not really necessary.

> Vaguely reminiscent of https://bugzilla.kernel.org/show_bug.cgi?id=16436
> but that bug has a different regression range which makes it not a great
> match. So I look forward to some clues to narrow this down.
>
I checked the bugreport, and yes, those error messages are very similar to
mine, except mine are starting at boot time. So the reason for my bug can not
be powermanagement (I think)

> Hope that helps,
> Jonathan

I hope it, too. )

Hans





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201203262242.58579.hans.ullrich@loop.de">http://lists.debian.org/201203262242.58579.hans.ullrich@loop.de
 
Old 03-26-2012, 08:44 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Am Montag, 26. März 2012 schrieben Sie:
> Hans-J. Ullrich wrote:
> > It is 3.2.0-2-amd64.
>
> Thanks. Did you mean this to be a private reply?
>

Oops, no it was a mistake by me. Sent it again, please don't wonder.
> To save a round-trip: the above is just a part of the package name
> rather than its version number. You can get the version number of
> the installed kernel with
>
> dpkg-query -W linux-image-$(uname -r)

dpkg-query: Warnung: Parsen der Datei »/var/lib/dpkg/available«, nahe Zeile
614272 Paket »cnews«:
Fehler in Versionszeichenkette »cr.g7-40.4«: Versionsnummer beginnt nicht mit
einer Ziffer
linux-image-3.2.0-2-amd64 3.2.12-1


>
> and of the running kernel by looking for the string in parentheses in
>
> cat /proc/version
>
> output.

Sorry!

Hans




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201203262244.59242.hans.ullrich@loop.de">http://lists.debian.org/201203262244.59242.hans.ullrich@loop.de
 
Old 03-26-2012, 09:27 PM
Jonathan Nieder
 
Default Bug#665881: module ath5k is blocking wlan-card

Hans-J. Ullrich wrote:
> Am Montag, 26. März 2012 schrieben Sie:

>> - can you reproduce this without using wicd? i.e.
>>
>> install iw and iproute
>> stop wicd
>> ip link set wlan0 up
>> iw dev wlan0 connect -w <SSID> key d:0:<WEP key>
>> dhclient wlan0
>>
>> with
>>
>> iw event -t
>>
>> running in another terminal to see if anything interesting happens.
>
> Yes, same problem without wicd! My system is configured, that I also can run it
> without wicd, but I am using wicd as it is more comfortable. But wicd indeed
> is not really necessary.

Does the event log say anything interesting?

What's most puzzling to me is that some people started experiencing
similar symptoms with 3.3-rc1 (and the regression range was reliable
and even bisectable). Which is of course newer than the kernel you
are using.

If you can get full "dmesg" output from booting up and triggering the
problem, that would be useful.

Thanks again for the quick response, and sorry for the trouble.
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120326212701.GJ7599@burratino">http://lists.debian.org/20120326212701.GJ7599@burratino
 
Old 03-27-2012, 06:02 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Hi Jonathan,

strange things happen. At the moment it is running, no problems at all. But I
did not change anything. I swear, the last days it did not work. Also the
weired messages in syslog are gone, those

223.597826] ath5k phy0: gain calibration timeout (2412MHz)
[ 224.086320] ath5k phy0: gain calibration timeout (2417MHz)
[ 224.580417] ath5k phy0: gain calibration timeout (2422MHz)

But I think, the bugreport should be left open for some time, as the problem
might come back. Is this ok for you?

As soon this will happen, I will send boot.logs and dmesg from boot. But at
the moment, as long as everything is working, this makes no sense.

Sorry for my late response, but yesterday was late night in Germany and today
I had to work, so I was able to send my answer just now.

Best regrads

Hans




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201203272002.50192.hans.ullrich@loop.de">http://lists.debian.org/201203272002.50192.hans.ullrich@loop.de
 
Old 03-27-2012, 06:14 PM
Jonathan Nieder
 
Default Bug#665881: module ath5k is blocking wlan-card

tags 665881 + unreproducible
quit

Hans-J. Ullrich wrote:

> strange things happen. At the moment it is running, no problems at all. But I
> did not change anything.

Thanks for the update, and no problem. Marking accordingly to save
future investigators some time.

(Maybe the signal strength, which is related to the physical position
of the laptop, changed.)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120327181416.GB26101@burratino">http://lists.debian.org/20120327181416.GB26101@burratino
 
Old 03-28-2012, 05:10 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Hello all,

it seems now, everything is working again. I cannot really explain, why.
However, it looks like the last update did fix the problem. I checked my logs,
and there were two packages updated, which are kernel related. Package "kmod"
was added, and package "module-init-tools" got from version 3.16 to 6.2, which
is a major jump. I suppose, the problem was fixed by one of these two packages,
but I cannot prove it.

Also the problem I mentionened with wicd is gone, too, although wicd was not
changed.

IMO the bug should be closed for now. If the same problem appears again, I
might send a new bugreport.

A great thank you to Jonathan Nieder, who helped me a lot and cared on this
bug. Again I learned new things, hope I can give some time a little back to
other users!

Best regards and thanks for all the help!

Hans







--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201203281910.24754.hans.ullrich@loop.de">http://lists.debian.org/201203281910.24754.hans.ullrich@loop.de
 
Old 03-29-2012, 04:57 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Hi Jonathan,

it is me again! Sorry, but obviously this bug is not gone, and IMO it should
be reopened.

Today I got the same problem again, and could fix it with the already mentioned
power-off-trick.

Below I added two dmesg-logs, one is called "dmesg", which is the troubled
one, the other is called "dmesg-ok.txt", that one is after "power-off and
working" one.

Hope this helps!

Kind regards


Hans
304032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.304043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 35.316030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.316037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 35.316045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 35.444030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 35.516031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 35.516039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 35.516046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.516054] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.516061] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 35.644039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 35.700031] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 35.700039] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 35.700045] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 35.756032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.756046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 35.768031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.768041] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 35.768050] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 35.896033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 35.968029] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 35.968040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 35.968048] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.968058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.968067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 36.100030] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 36.156027] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 36.156035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 36.156054] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 36.212028] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.212042] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 36.224027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.224036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 36.224045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 36.352026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 36.424032] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 36.424040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 36.424046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.424053] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.424061] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 36.552038] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 36.612040] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 36.612047] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 36.612066] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 36.668030] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.668044] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 36.680027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.680036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 36.680044] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 36.808034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 36.884037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 36.884053] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 36.884060] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.884071] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.884080] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.012040] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.068030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.068037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.068057] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 37.124029] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.124044] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 37.136027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.136036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 37.136045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 37.264026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 37.336026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 37.336035] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 37.336042] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.336049] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.336057] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.464027] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.520027] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.520033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.520049] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 37.576048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.576066] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 37.588049] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.588064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 37.588076] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 37.716030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 37.788030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 37.788042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 37.788048] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.788059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.788067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.916039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.972030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.972038] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.972044] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.028044] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.028065] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.040034] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.040044] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.040052] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 38.168030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 38.240031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 38.240040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 38.240046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.240054] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.240062] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 38.368028] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 38.424033] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 38.424040] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 38.424046] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.480032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.480043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.492030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.492037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.492045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 38.620034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 38.692030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 38.692042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 38.692049] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.692059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.692068] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 38.820037] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 38.876030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 38.876037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 38.876043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.932033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.932046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.944030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.944038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.944047] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.072038] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 39.144030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 39.144042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 39.144049] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.144060] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.144070] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 39.272031] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 39.328030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 39.328036] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 39.328042] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 39.384033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.384046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 39.396030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.396038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 39.396045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.524033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 39.596045] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 39.596063] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 39.596070] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.596081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.596090] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 39.724029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 39.780031] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 39.780037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 39.780043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 39.836033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.836046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 39.848030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.848041] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 39.848050] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.976033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.048044] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.048061] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.048070] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.048081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.048090] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 40.176029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 40.232030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 40.232037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 40.232042] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 40.288044] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.288057] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 40.300029] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.300038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 40.300045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 40.428034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.500031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.500039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.500045] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.500053] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.500060] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 40.628036] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 40.684034] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 40.684041] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 40.684047] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 40.740033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.740047] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 40.752031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.752040] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 40.752049] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 40.880031] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.952033] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.952043] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.952050] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.952058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.952067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.080034] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 41.136029] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 41.136037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 41.136043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 41.192035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.192054] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 41.208031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.208042] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 41.208051] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 41.336026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 41.408028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 41.408040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 41.409248] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.409258] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.409266] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.536025] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 41.592037] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 41.592046] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 41.592055] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 41.648027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.648043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 41.660026] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.660035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 41.660043] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 41.788026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 41.860049] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 41.860067] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 41.861263] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.861274] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.861283] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.988027] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.044041] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.044049] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.044058] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 42.100027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.100043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 42.112026] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.112035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 42.112043] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 42.240025] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 42.312028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 42.312037] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 42.313145] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.313153] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.313161] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 42.440026] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.496025] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.496032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.496037] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 42.552027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.552038] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 42.564044] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.564059] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 42.564070] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 42.692025] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 42.764026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 42.764038] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 42.765133] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.765143] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.765151] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 42.892029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.948026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.948033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.948039] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.004027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.004042] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.016241] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.016256] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.016267] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 43.144030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 43.216027] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 43.216039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 43.217079] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.217090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.217099] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 43.344025] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 43.400026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 43.400032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 43.400038] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.456027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.456039] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.468025] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.468033] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.468041] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 43.596044] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 43.668026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 43.668038] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 43.668959] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.668970] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.668978] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 43.800039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 43.860032] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 43.860041] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 43.860061] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.916061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.916081] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.928041] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.928056] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.928081] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.056047] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 44.128088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 44.128107] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 44.129246] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.129258] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.129267] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 44.256055] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 44.312039] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 44.312048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 44.312057] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 44.368076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.368097] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 44.378376] loop: module loaded
[ 44.380590] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.380604] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 44.380615] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.447768] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00)
[ 44.447833] powernow-k8: fid 0xb (1900 MHz), vid 0x11
[ 44.447837] powernow-k8: fid 0xa (1800 MHz), vid 0x12
[ 44.447840] powernow-k8: fid 0x8 (1600 MHz), vid 0x13
[ 44.447843] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 44.508062] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 44.580157] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 44.580178] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 44.581527] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.581540] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.581551] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 44.708595] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 44.764047] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 44.764058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 44.764086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 44.820048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.820072] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 44.832053] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.832069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 44.832082] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.960082] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.032145] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.032185] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.034313] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.034338] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.034359] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 45.160107] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 45.216053] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 45.216072] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 45.216086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 45.272121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.272164] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 45.288044] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.288068] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 45.288091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 45.416091] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.492046] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.492075] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.494299] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.494323] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.494342] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 45.620082] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 45.676051] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 45.676070] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 45.676086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 45.732076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.732116] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 45.744048] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.744070] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 45.744091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 45.872064] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.944066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.944097] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.946371] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.946396] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.946416] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.072065] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 46.128087] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 46.128109] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 46.128127] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 46.184064] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.184100] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 46.196052] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.196075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 46.196096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 46.324070] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 46.396062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 46.396100] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 46.398534] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.398562] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.398582] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.524095] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 46.580066] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 46.580087] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 46.580125] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 46.636066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.636109] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 46.648098] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.648130] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 46.648154] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 46.776076] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 46.848066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 46.848105] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 46.850667] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.850691] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.850710] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.931674] EXT3-fs: barriers not enabled
[ 46.932172] kjournald starting. Commit interval 5 seconds
[ 46.940304] EXT3-fs (dm-0): using internal journal
[ 46.940323] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 46.960565] EXT3-fs: barriers not enabled
[ 46.961035] kjournald starting. Commit interval 5 seconds
[ 46.961584] EXT3-fs (dm-1): using internal journal
[ 46.961599] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 46.974094] EXT3-fs: barriers not enabled
[ 46.974543] kjournald starting. Commit interval 5 seconds
[ 46.975052] EXT3-fs (dm-2): using internal journal
[ 46.975067] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 46.984102] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.040064] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.040085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.040124] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 47.096113] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.096157] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 47.108075] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.108282] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 47.108308] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 47.236092] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 47.313678] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 47.313715] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 47.316381] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.316407] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.316428] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 47.444049] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.500079] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.500098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.500139] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 47.556132] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.556173] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 47.572052] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.572079] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 47.572104] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 47.708080] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 47.780075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 47.780113] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 47.785801] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.785827] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.785847] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 47.916074] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.972109] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.972131] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.972151] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.028097] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.028138] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.040050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.040072] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.040093] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 48.168071] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 48.240057] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 48.240086] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 48.243059] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.243086] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.243106] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 48.368062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 48.424081] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 48.424101] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 48.424139] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.480078] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.480118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.496062] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.496087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.496110] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 48.624100] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 48.696073] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 48.696109] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 48.699123] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.699148] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.699171] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 48.824070] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 48.880060] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 48.880080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 48.880099] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.936118] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.936160] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.952096] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.952128] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.952153] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 49.080070] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 49.152723] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 49.152764] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 49.155922] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.155946] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.155966] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 49.281327] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 49.340092] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 49.340113] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 49.340132] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 49.396169] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.396217] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 49.408197] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.408229] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 49.408254] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 49.536143] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 49.608096] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 49.608115] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 49.610092] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.610104] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.610114] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 49.740066] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 49.796051] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 49.796062] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 49.796087] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 49.804455] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.856035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.856058] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 49.872030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.872042] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 49.872053] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.004062] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 50.076105] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 50.076143] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 50.079792] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.079817] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.079836] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 50.208062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 50.264056] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 50.264074] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 50.264104] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 50.320066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.320103] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 50.332057] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.332079] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 50.332101] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.460049] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 50.532064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 50.532096] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 50.535437] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.535464] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.535485] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 50.664047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 50.720065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 50.720085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 50.720104] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 50.776052] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.776089] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 50.788057] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.788078] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 50.788101] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.972505] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[ 50.975008] wlan0: authenticated
[ 50.975025] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[ 50.978692] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=1)
[ 50.978696] wlan0: associated
[ 50.979356] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 51.000032] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.072049] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.072066] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.073916] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.073927] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.073936] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 51.200081] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 51.256049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 51.256066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 51.256081] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 51.312085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.312119] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 51.324072] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.324098] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 51.324121] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 51.452061] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.524064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.524101] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.527244] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.527269] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.527288] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 51.652063] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 51.708065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 51.708085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 51.708102] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 51.764080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.764113] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 51.776058] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.776081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 51.776103] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 51.904054] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.976060] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.976099] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.979158] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.979184] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.979204] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 52.104072] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 52.160137] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 52.160158] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 52.160178] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 52.216090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.216134] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 52.228050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.228075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 52.228096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 52.356068] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 52.428091] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 52.428130] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 52.431034] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.431061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.431082] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 52.556125] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 52.612055] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 52.612074] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 52.612090] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 52.668062] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.668098] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 52.680046] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.680067] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 52.680090] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 52.808098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 52.880360] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 52.880394] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 52.883187] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.883212] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.883233] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.008061] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.064066] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.064083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.064097] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 53.120083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.120121] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 53.132087] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.132108] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 53.132129] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 53.260098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 53.332098] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 53.332138] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 53.333288] forcedeth 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 53.333536] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 53.335028] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.335284] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.335309] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.335328] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.464073] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.520040] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.520059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.520096] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 53.580098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.580141] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 53.592119] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.592151] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 53.592178] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 53.724090] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 53.796090] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 53.796131] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 53.798789] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.798815] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.798834] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.924070] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.980074] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.980096] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.980140] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.036066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.036108] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.052065] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.052092] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.052115] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 54.180065] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 54.252094] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 54.252133] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 54.256858] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.256883] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.256902] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 54.384100] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 54.440069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 54.440091] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 54.440111] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.496142] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.496185] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.512082] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.512115] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.512141] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 54.640103] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 54.712087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 54.712129] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 54.714599] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.714626] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.714646] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 54.824018] CE: hpet increased min_delta_ns to 11520 nsec
[ 54.840092] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 54.896078] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 54.896098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 54.896141] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.952083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.952124] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.968058] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.968089] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.968113] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 55.096122] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 55.176164] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 55.176204] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 55.178877] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.178903] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.178922] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 55.308087] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 55.364069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 55.364090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 55.364110] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 55.420146] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.420186] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 55.436081] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.436113] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 55.436139] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 55.564098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 55.636109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 55.636147] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 55.636280] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.636306] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.636325] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 55.768107] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 55.824107] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 55.824127] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 55.824170] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 55.884095] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.884137] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 55.896091] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.896114] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 55.896137] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.028052] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 56.100043] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 56.100060] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 56.100133] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.100145] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.100154] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 56.228093] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 56.284080] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 56.284099] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 56.284141] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 56.340087] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.340131] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 56.356083] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.356109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 56.356133] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.488078] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 56.560061] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 56.560101] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 56.562859] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.562883] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.562903] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 56.688047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 56.744026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 56.744033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 56.744052] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 56.804059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.804082] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 56.816046] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.816063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 56.816077] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.948095] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.020087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.020127] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.023265] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.023290] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.023310] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 57.152062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 57.208096] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 57.208118] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 57.208158] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 57.220750] fuse init (API version 7.16)
[ 57.268088] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.268130] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 57.280060] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.280082] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 57.280104] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 57.408059] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.480069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.480102] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.483160] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.483186] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.483207] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 57.608063] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 57.664056] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 57.664075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 57.664089] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 57.724121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.724164] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 57.736115] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.736139] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 57.736160] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 57.864057] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.936081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.936116] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.939678] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.939705] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.939725] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.064086] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 58.120077] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 58.120099] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 58.120120] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 58.176068] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.176110] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 58.188081] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.188109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 58.188133] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 58.317742] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 58.388099] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 58.388118] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 58.390084] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.390095] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.390105] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.516047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 58.572076] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 58.572097] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 58.572117] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 58.628075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.628118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 58.640079] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.640103] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 58.640125] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 58.768096] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 58.840069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 58.840104] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 58.843649] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.843674] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.843694] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.868158] NET: Registered protocol family 23
[ 58.968071] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms s
 
Old 03-29-2012, 08:18 PM
Jonathan Nieder
 
Default Bug#665881: module ath5k is blocking wlan-card

reopen 665881
quit

Hans-J. Ullrich wrote:

> Today I got the same problem again, and could fix it with the already mentioned
> power-off-trick.

Thanks.

[...]
> ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
> hub 1-0:1.0: unable to enumerate USB device on port 6
> hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
> ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
> hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
> hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
> ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
> hub 3-0:1.0: unable to enumerate USB device on port 6
> hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[... etc ...]

Yech. How does the timing of these messages relate to other events
like the connection being dropped? Can you start collecting "iw event
-t" output in case it happens again?

The flood of messages seems to have filled the dmesg buffer,
unfortunately. Do you have a log from the beginning of this storm
(maybe somewhere in /var/log/dmesg*)? Were there any "gain
calibration timeout" messages this time?

I guess I'd also recommend switching to 3.3 from experimental for now,
even though it is rumored to have similar problems that 3.2.y doesn't
have. I don't expect it to work better, but it should make it easier
to get help from upstream.

Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120329201850.GA18784@burratino">http://lists.debian.org/20120329201850.GA18784@burratino
 
Old 03-31-2012, 11:06 AM
Jonathan Nieder
 
Default Bug#665881: module ath5k is blocking wlan-card

tags 665881 + moreinfo
quit

Hans-J. Ullrich wrote:

> So I am attaching several logfiles to this message. Please apologize, it is
> rather big, but I hope it will help.

Thanks. The messages indicate that this is a 2.6.37.y kernel, not from
Debian. Am I misunderstanding?



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120331110613.GD12552@burratino">http://lists.debian.org/20120331110613.GD12552@burratino
 
Old 04-01-2012, 12:37 PM
"Hans-J. Ullrich"
 
Default Bug#665881: module ath5k is blocking wlan-card

Made some new tests!

When the wlan-hardware is set by the kernel, also Windows-XP will not see the
card.

So it is proven: The kernel is setting my wlancard into some mode, which can
only be reset, when I take completely the power off the notebook.

Reinitialisation through a reboot or by reloading the kernel-module does not
work.

Greets

Hans




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201204011437.27078.hans.ullrich@loop.de">http://lists.debian.org/201204011437.27078.hans.ullrich@loop.de
 

Thread Tools




All times are GMT. The time now is 05:18 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org