Package: linux-2.6
Version: 2.6.32-35squeeze2
Severity: normal


enabling ksm by echo 1 > /sys/kernel/mm/ksm/run has no effect
full_scans are always 0, no increment in any of the other variables



-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:23:16 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=49a2baa4-c4fb-4b25-a847-da38aabf6eb4 ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[1888762.816160] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00
[1888762.816185] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
[1888762.816188] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[1888762.816195] ata1.00: status: { DRDY }
[1888762.816207] ata1: hard resetting link
[1888763.136059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[1888763.160243] ata1.00: configured for UDMA/100
[1888763.165702] ata1: EH complete
[1888793.816223] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[1888793.816236] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00
[1888793.816260] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
[1888793.816264] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[1888793.816270] ata1.00: status: { DRDY }
[1888793.816284] ata1: hard resetting link
[1888794.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[1888794.160243] ata1.00: configured for UDMA/100
[1888794.160859] ata1: EH complete
[1888824.816182] ata1.00: limiting speed to UDMA/66:PIO4
[1888824.816192] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[1888824.816202] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00
[1888824.816226] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
[1888824.816230] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[1888824.816236] ata1.00: status: { DRDY }
[1888824.816249] ata1: hard resetting link
[1888825.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[1888825.160243] ata1.00: configured for UDMA/66
[1888825.160812] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[1888825.160820] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
[1888825.160827] Descriptor sense data with sense descriptors (in hex):
[1888825.160831] 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00
[1888825.160845] 00 08 00 00 a0 40
[1888825.160853] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information
[1888825.160860] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00
[1888825.160874] end_request: I/O error, dev sr0, sector 33129740
[1888825.160907] ata1: EH complete
[1888855.816222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[1888855.816235] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 05 2c 00 00 01 00
[1888855.816259] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
[1888855.816263] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[1888855.816269] ata1.00: status: { DRDY }
[1888855.816283] ata1: hard resetting link
[1888856.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[1888856.160244] ata1.00: configured for UDMA/66
[1888856.160811] ata1: EH complete
[1898559.432027] usb 1-6: new high speed USB device using ehci_hcd and address 4
[1898560.344047] hub 1-0:1.0: unable to enumerate USB device on port 6
[1898560.716021] usb 4-2: new full speed USB device using ohci_hcd and address 2
[1898560.918991] usb 4-2: not running at top speed; connect to a high speed hub
[1898560.942991] usb 4-2: New USB device found, idVendor=1949, idProduct=0004
[1898560.942998] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1898560.943004] usb 4-2: Product: Amazon Kindle
[1898560.943008] usb 4-2: Manufacturer: Amazon
[1898560.943012] usb 4-2: SerialNumber: B008D0A112830JDV
[1898560.944961] usb 4-2: configuration #1 chosen from 1 choice
[1898561.378518] Initializing USB Mass Storage driver...
[1898561.378723] scsi7 : SCSI emulation for USB Mass Storage devices
[1898561.378972] usbcore: registered new interface driver usb-storage
[1898561.378979] USB Mass Storage support registered.
[1898561.382766] usb-storage: device found at 2
[1898561.382772] usb-storage: waiting for device to settle before scanning
[1898566.382615] usb-storage: device scan complete
[1898566.389592] scsi 7:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
[1898566.392415] sd 7:0:0:0: Attached scsi generic sg5 type 0
[1898566.416569] sd 7:0:0:0: [sdc] 6410688 512-byte logical blocks: (3.28 GB/3.05 GiB)
[1898566.534602] sd 7:0:0:0: [sdc] Write Protect is off
[1898566.534611] sd 7:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[1898566.534616] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[1898566.662540] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[1898566.662551] sdc: sdc1
[1898566.802563] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[1898566.802575] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[1898658.694107] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[1898678.752197] usb 4-2: USB disconnect, address 2
[1898785.692024] usb 1-6: new high speed USB device using ehci_hcd and address 5
[1898786.496041] hub 1-0:1.0: unable to enumerate USB device on port 6
[1898786.868033] usb 4-2: new full speed USB device using ohci_hcd and address 3
[1898787.070992] usb 4-2: not running at top speed; connect to a high speed hub
[1898787.094992] usb 4-2: New USB device found, idVendor=1949, idProduct=0004
[1898787.094999] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1898787.095004] usb 4-2: Product: Amazon Kindle
[1898787.095008] usb 4-2: Manufacturer: Amazon
[1898787.095012] usb 4-2: SerialNumber: B008D0A112830JDV
[1898787.097064] usb 4-2: configuration #1 chosen from 1 choice
[1898787.107372] scsi8 : SCSI emulation for USB Mass Storage devices
[1898787.109762] usb-storage: device found at 3
[1898787.109768] usb-storage: waiting for device to settle before scanning
[1898792.110652] usb-storage: device scan complete
[1898792.117640] scsi 8:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
[1898792.120418] sd 8:0:0:0: Attached scsi generic sg5 type 0
[1898792.144703] sd 8:0:0:0: [sdc] 6410688 512-byte logical blocks: (3.28 GB/3.05 GiB)
[1898792.254647] sd 8:0:0:0: [sdc] Write Protect is off
[1898792.254657] sd 8:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[1898792.254662] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[1898792.384621] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[1898792.384635] sdc: sdc1
[1898792.554584] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[1898792.554597] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[1898793.624500] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[1898840.434895] usb 4-2: USB disconnect, address 3
[1910603.596222] UDF-fs INFO UDF: Mounting volume 'LinuxUDF', timestamp 2009/09/21 19:22 (1000)

** Model information
sys_vendor:
product_name:
product_version: 1.0
chassis_vendor:
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 080012
board_vendor:
board_name:
board_version: 1.0

** Loaded modules:
Module Size Used by
nls_utf8 1208 0
nls_cp437 5817 0
vfat 7900 0
fat 40070 1 vfat
usb_storage 39961 0
udf 66692 0
crc_itu_t 1307 1 udf
autofs4 20821 4
cpufreq_conservative 5162 1
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
ppdev 5030 0
lp 7462 0
tun 10860 2
sit 8176 0
tunnel4 1973 1 sit
sco 7225 2
bridge 39662 0
stp 1440 1 bridge
bnep 9443 2
l2cap 24752 3 bnep
crc16 1319 1 l2cap
bluetooth 41843 5 sco,bnep,l2cap
rfkill 13060 2 bluetooth
binfmt_misc 6447 1
fuse 50940 1
nfsd 254974 13
exportfs 3186 1 nfsd
nfs 241402 0
lockd 57651 2 nfsd,nfs
fscache 29882 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33492 2 nfsd,nfs
sunrpc 161701 17 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
powernow_k8 10978 0
loop 11799 0
snd_intel8x0 24218 1
snd_ac97_codec 99186 1 snd_intel8x0
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60503 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
nvidia 10670090 28
snd_seq_midi_event 4628 1 snd_seq_midi
i2c_core 15835 1 nvidia
snd_seq 42913 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
parport_pc 18855 1
snd 46542 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_ device
pcspkr 1699 0
evdev 7352 11
psmouse 49937 0
shpchp 26264 0
parport 27954 3 ppdev,lp,parport_pc
edac_core 29261 0
edac_mce_amd 6449 0
soundcore 4598 1 snd
k8temp 3283 0
serio_raw 3752 0
pci_hotplug 21203 1 shpchp
button 4650 0
snd_page_alloc 6265 2 snd_intel8x0,snd_pcm
processor 29951 1 powernow_k8
ext3 106726 3
jbd 37133 1 ext3
mbcache 5050 1 ext3
raid1 18431 2
raid0 5517 1
md_mod 73872 5 raid1,raid0
sg 24085 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29937 8
crc_t10dif 1276 1 sd_mod
usbhid 33324 1
ata_generic 3239 0
hid 63273 1 usbhid
sata_sis 3730 6
ohci_hcd 19359 0
pata_sis 9639 1 sata_sis
sata_via 7944 0
thermal 11674 0
ehci_hcd 32129 0
thermal_sys 11942 2 processor,thermal
sis190 13642 0
mii 3210 1 sis190
libata 133808 4 ata_generic,sata_sis,pata_sis,sata_via
e1000 85581 0
scsi_mod 126565 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 122562 6 usb_storage,usbhid,ohci_hcd,ehci_hcd
nls_base 6377 6 nls_utf8,nls_cp437,vfat,fat,udf,usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host [1039:0761] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64

00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fc000000-febfffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] [1039:0965] (rev 48)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_sis

00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: Elitegroup Computer Systems Device [1019:1880]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at e400 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH

00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fbffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 190 Ethernet Adapter [1039:0190]
Subsystem: Silicon Integrated Systems [SiS] Device [1039:0191]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbffbc00 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: sis190

00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:08.0 IDE interface [0101]: Silicon Integrated Systems [SiS] Device [1039:0183] (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device [1019:0131]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at <unassigned>
Capabilities: <access denied>
Kernel driver in use: sata_sis

00:09.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=128K]
Region 2: Memory at fbf80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at b800 [size=64]
Expansion ROM at fbf40000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000

00:09.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fbf20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at b400 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000

00:0a.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at b000 [size=16]
Region 1: I/O ports at a800 [size=16]
Region 2: I/O ports at a400 [size=16]
Region 3: I/O ports at a000 [size=16]
Region 4: I/O ports at 9800 [size=32]
Region 5: I/O ports at 9400 [size=256]
Expansion ROM at fbfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sata_via

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0463:ffff MGE UPS Systems UPS
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35squeeze2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-35squeeze2 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information excluded



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111004143839.24122.22542.reportbug@localhost">ht tp://lists.debian.org/20111004143839.24122.22542.reportbug@localhost