FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-10-2012, 10:50 AM
Johannes Kolb
 
Default Bug#663332: linux-image-3.2.0-1-686-pae: xorg fails to start after kernel upgrade

Package: linux-2.6
Version: 3.2.6-1
Severity: important

After the update to kernel version 3.2.0 the system fails to detect the
soundcard (snd_hda_intel) and framebuffer (i915) and X.org fails to
start.

Comparing with the previous kernel version 3.1.0 I found several missing
modules. But even if I load these modules (which works without errors),
X.org still doesn't want to start.

Any ideas, where to look for the error? I already checked syslog and
dmesg and could not find anything special, besides the missing

| [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

which normally appears right after the bluetooth initialization. The
X.org logfile is also not very helpful, it just says
"(EE) No devices detected" after trying to load the i810 driver.


The graphic hardware in question is the onboard device in a
Samsung NC10 netbook. (lspci says, it is a "Intel Coprporation Mobile
945GME Express Integrated Graphics Controller (rev 03)")

Find below a diff between "lsmod" output on a good (3.1.0) kernel and
the bad (3.2.0) kernel. I would be glad to help finding the problem.

Thanks in advance,

Johannes


--- erg.good.mod 2012-03-10 12:13:49.000000000 +0100
+++ erg.bad.mod 2012-03-10 12:13:39.000000000 +0100
@@ -1,87 +1,38 @@
-ac 12552 0
acpi_cpufreq 12807 1
-aes_generic 32970 1 aes_i586
-aes_i586 16608 1
-arc4 12418 2
ata_generic 12439 0
-ath 17114 1 ath5k
-ath5k 115246 0
-battery 12957 0
binfmt_misc 12813 1
bnep 17288 2
-btusb 17278 1
-button 12817 1 i915
-cfg80211 113073 3 ath5k,ath,mac80211
cpufreq_conservative 12987 0
cpufreq_powersave 12422 0
cpufreq_stats 12762 0
cpufreq_userspace 12520 0
crc16 12327 1 bluetooth
crc_t10dif 12332 1 sd_mod
-cryptd 14125 0
-drm 129839 3 i915,drm_kms_helper
-drm_kms_helper 22699 1 i915
-ecb 12649 1
ehci_hcd 35509 0
-evdev 17225 28
fan 12594 0
-i2c_algo_bit 12713 1 i915
-i2c_core 19116 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_ i801
-i2c_i801 12670 0
-i915 303824 2
-iTCO_vendor_support 12632 1 iTCO_wdt
-iTCO_wdt 16945 0
-joydev 17010 0
lp 12797 0
-mac80211 166082 1 ath5k
mbcache 12897 1 ext3
-media 13692 2 uvcvideo,videodev
Module Size Used by
mperf 12421 1 acpi_cpufreq
parport 31254 3 parport_pc,ppdev,lp
parport_pc 22036 0
-pcspkr 12515 0
-power_supply 13283 2 ac,battery
ppdev 12651 0
-psmouse 46143 0
-rng_core 12580 0
-samsung_laptop 12660 0
sd_mod 35425 3
-serio_raw 12738 0
-snd 38551 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device
-snd_hda_codec 58526 2 snd_hda_codec_realtek,snd_hda_intel
-snd_hda_codec_realtek 196816 1
-snd_hda_intel 21725 0
-snd_hrtimer 12540 1
-snd_hwdep 12943 1 snd_hda_codec
-snd_mixer_oss 17668 1 snd_pcm_oss
-snd_page_alloc 12867 2 snd_hda_intel,snd_pcm
-snd_pcm 53258 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
-snd_pcm_oss 36181 0
-snd_rawmidi 18376 1 snd_seq_midi
-snd_seq 39487 3 snd_seq_midi,snd_seq_midi_event
-snd_seq_device 13016 3 snd_seq_midi,snd_rawmidi,snd_seq
-snd_seq_midi 12744 0
-snd_seq_midi_event 13124 1 snd_seq_midi
-snd_timer 22356 3 snd_hrtimer,snd_pcm,snd_seq
-soundcore 12921 1 snd
thermal 13103 0
uhci_hcd 22337 0
-uvcvideo 56932 0
-video 17412 1 i915
-videodev 61627 1 uvcvideo


-- Package-specific info:
** Version:
Linux version 3.2.0-1-686-pae (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 SMP Fri Feb 17 06:27:21 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-686-pae root=UUID=8b6ce2c8-a8f1-44b7-bb24-0edb0d468b28 ro

** Not tainted

** Kernel log:
[ 1.562191] usb usb5: Manufacturer: Linux 3.2.0-1-686-pae uhci_hcd
[ 1.562280] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.565962] hub 5-0:1.0: USB hub found
[ 1.566066] hub 5-0:1.0: 2 ports detected
[ 1.617142] SCSI subsystem initialized
[ 1.637088] libata version 3.00 loaded.
[ 1.638377] ata_piix 0000:00:1f.2: version 2.13
[ 1.638418] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.638525] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.792169] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.793459] scsi0 : ata_piix
[ 1.793885] scsi1 : ata_piix
[ 1.795639] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.795727] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.796541] ata2: port disabled--ignoring
[ 1.936162] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[ 1.991585] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.991691] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.005562] ata1.00: configured for UDMA/133
[ 2.006031] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 2.019177] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.019541] sd 0:0:0:0: [sda] Write Protect is off
[ 2.019639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.019769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.046825] sda: sda1 sda2 sda3 sda4
[ 2.048323] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.103285] usb 1-8: New USB device found, idVendor=174f, idProduct=5933
[ 2.103390] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.103485] usb 1-8: Product: USB Camera Device
[ 2.103570] usb 1-8: Manufacturer: Syntek
[ 2.103654] usb 1-8: SerialNumber: STK00001
[ 2.376160] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.550818] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2151
[ 2.550924] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.551020] usb 3-2: Product: BCM2046 Bluetooth Device
[ 2.551115] usb 3-2: Manufacturer: Broadcom Corp
[ 2.551191] usb 3-2: SerialNumber: 0C6076E2140D
[ 2.712412] device-mapper: uevent: version 1.0.3
[ 2.712977] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.775531] PM: Starting manual resume from disk
[ 2.775634] PM: Hibernation image partition 8:2 present
[ 2.775638] PM: Looking for hibernation image.
[ 2.776056] PM: Image not found (code -22)
[ 2.776061] PM: Hibernation image not present or could not be loaded.
[ 2.785031] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.785042] PM: Basic memory bitmaps created
[ 2.797636] PM: Basic memory bitmaps freed
[ 2.880789] kjournald starting. Commit interval 5 seconds
[ 2.881094] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 7.164399] Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k
[ 7.501300] EXT3-fs (sda3): using internal journal
[ 12.684157] fuse init (API version 7.17)
[ 25.008172] Bluetooth: Core ver 2.16
[ 25.008299] NET: Registered protocol family 31
[ 25.008376] Bluetooth: HCI device and connection manager initialized
[ 25.008458] Bluetooth: HCI socket layer initialized
[ 25.008535] Bluetooth: L2CAP socket layer initialized
[ 25.008620] Bluetooth: SCO socket layer initialized
[ 25.040838] Bluetooth: RFCOMM TTY layer initialized
[ 25.040932] Bluetooth: RFCOMM socket layer initialized
[ 25.041011] Bluetooth: RFCOMM ver 1.11
[ 25.336690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.336776] Bluetooth: BNEP filters: protocol multicast
[ 33.951411] lp: driver loaded but no devices found
[ 33.960756] ppdev: user-space parallel port driver
[ 44.443026] inputlircd[1556]: segfault at dfacce44 ip 0804978d sp bfacca10 error 7 in inputlircd[8048000+4000]
[ 150.748486] sky2 0000:03:00.0: eth0: enabling interface
[ 150.749777] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 152.223037] sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 152.223871] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 162.592080] eth0: no IPv6 routers present
[ 673.898695] acpi device:04: registered as cooling_device3
[ 673.899046] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 673.899162] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 673.944347] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 673.944524] ACPI: Lid Switch [LID0]
[ 673.944755] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 673.944865] ACPI: Power Button [PWRB]
[ 673.945093] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 673.945201] ACPI: Sleep Button [SLPB]
[ 673.945429] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 673.945534] ACPI: Power Button [PWRF]
[ 674.043128] [drm] Initialized drm 1.1.0 20060810
[ 674.199999] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 674.200145] i915 0000:00:02.0: setting latency timer to 64
[ 674.277675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 674.277776] [drm] Driver supports precise vblank timestamp query.
[ 674.278097] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 674.610616] [drm] initialized overlay support
[ 674.633309] fbcon: inteldrmfb (fb0) is primary device
[ 675.023855] Console: switching to colour frame buffer device 128x37
[ 675.041481] fb0: inteldrmfb frame buffer device
[ 675.041486] drm: registered panic notifier
[ 675.041767] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 714.938914] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 714.942736] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 714.942800] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 715.000701] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 715.007799] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 715.011621] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

** Model information
not available

** Loaded modules:
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
snd_seq_device
snd
soundcore
snd_page_alloc
i915
drm_kms_helper
drm
i2c_algo_bit
button
i2c_core
video
acpi_cpufreq
processor
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
crc16
binfmt_misc
uinput
fuse
ext3
jbd
mbcache
dm_mod
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
thermal
uhci_hcd
fan
thermal_sys
sky2
ehci_hcd
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f0340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]

00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]

00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]

00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]

00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1810 [size=16]
Capabilities: <access denied>

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 18a0 [size=32]

02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 13)
Subsystem: Samsung Electronics Co Ltd Device [144d:ca00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a5c:2151 Broadcom Corp. Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 174f:5933 Syntek
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.100
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.2.0-1-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-27

Versions of packages linux-image-3.2.0-1-686-pae suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-1-686-pae/postinst/missing-firmware-3.2.0-1-686-pae:
linux-image-3.2.0-1-686-pae/prerm/removing-running-kernel-3.2.0-1-686-pae: true
linux-image-3.2.0-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-686-pae/postinst/depmod-error-initrd-3.2.0-1-686-pae: false



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120310115041.GA26985@graograman.kolb.regensburg" >http://lists.debian.org/20120310115041.GA26985@graograman.kolb.regensburg
 
Old 03-18-2012, 11:00 AM
Goga
 
Default Bug#663332: linux-image-3.2.0-1-686-pae: xorg fails to start after kernel upgrade

Package: linux-2.6
Followup-For: Bug #663332



I tried to downgrade the initramfs-tools to 0.98.8 version with my 3.2.0-2-686-pae linux-image (3.2.10-1)X, but id didn't help me. I couldn't start X with radeon/vesa
drivers.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120318120015.3940.89409.reportbug@localhost.loca ldomain">http://lists.debian.org/20120318120015.3940.89409.reportbug@localhost.loca ldomain
 
Old 03-19-2012, 03:21 PM
Goga
 
Default Bug#663332: linux-image-3.2.0-1-686-pae: xorg fails to start after kernel upgrade

Package: initramfs-tools
Followup-For: Bug #663332



-- Package-specific info:
-- initramfs sizes
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.17-2-686
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.18-1-686
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.18-2-686
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.22-2-686
-rw-r--r-- 1 root root 4.7M Feb 1 2008 /boot/initrd.img-2.6.22-2-686.bak
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.26-1-686
-rw-r--r-- 1 root root 5.6M Oct 11 2008 /boot/initrd.img-2.6.26-1-686.bak
-rw-r--r-- 1 root root 2.5M Mar 18 14:35 /boot/initrd.img-2.6.27.1-custom-default1
-rw-r--r-- 1 root root 5.5M Oct 10 20:03 /boot/initrd.img-2.6.29-1-686
-rw-r--r-- 1 root root 2.5M Mar 13 14:42 /boot/initrd.img-2.6.29-1-686_new
-rw-r--r-- 1 root root 4.5M Apr 9 2006 /boot/initrd.img-2.6.8-2-686
-- /proc/cmdline
root=UUID=43a7c076-41d1-41af-be22-9a969a2afcf2 ro

-- /proc/filesystems
ext3
fuseblk

-- lsmod
Module Size Used by
dm_snapshot 32036 0
dm_mirror 17376 0
dm_region_hash 13235 1 dm_mirror
dm_log 13309 2 dm_region_hash,dm_mirror
dm_mod 57278 3 dm_log,dm_mirror,dm_snapshot
fuse 52153 1
snd_wavefront 26625 0
snd_cs4236 26487 0
radeon 570912 1
snd_intel8x0 22372 0
snd_opl3_lib 13141 2 snd_cs4236,snd_wavefront
snd_hwdep 12943 2 snd_opl3_lib,snd_wavefront
snd_ac97_codec 84201 1 snd_intel8x0
snd_wss_lib 22493 2 snd_cs4236,snd_wavefront
snd_pcm_oss 36181 0
snd_mixer_oss 17668 1 snd_pcm_oss
snd_pcm 53390 5 snd_pcm_oss,snd_wss_lib,snd_ac97_codec,snd_intel8x 0,snd_cs4236
ttm 42997 1 radeon
snd_mpu401 12633 0
snd_mpu401_uart 13299 3 snd_mpu401,snd_cs4236,snd_wavefront
snd_page_alloc 12867 3 snd_pcm,snd_wss_lib,snd_intel8x0
snd_seq_midi 12744 0
drm_kms_helper 22699 1 radeon
snd_seq_midi_event 13124 1 snd_seq_midi
drm 134178 3 drm_kms_helper,ttm,radeon
snd_rawmidi 18376 3 snd_seq_midi,snd_mpu401_uart,snd_wavefront
snd_seq 39487 2 snd_seq_midi_event,snd_seq_midi
power_supply 13283 1 radeon
i2c_algo_bit 12713 1 radeon
i2c_i801 12670 0
psmouse 54927 0
snd_seq_device 13016 4 snd_seq,snd_rawmidi,snd_seq_midi,snd_opl3_lib
iTCO_wdt 16945 0
i2c_core 19116 5 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,radeon
ns558 12431 0
snd_timer 22356 4 snd_seq,snd_pcm,snd_wss_lib,snd_opl3_lib
snd 42691 16 snd_timer,snd_seq_device,snd_seq,snd_rawmidi,snd_m pu401_uart,snd_mpu401,snd_pcm,snd_mixer_oss,snd_pc m_oss,snd_wss_lib,snd_ac97_codec,snd_hwdep,snd_opl 3_lib,snd_intel8x0,snd_cs4236,snd_wavefront
shpchp 26717 0
iTCO_vendor_support 12632 1 iTCO_wdt
gameport 13375 2 ns558
serio_raw 12803 0
evdev 17225 4
soundcore 12921 1 snd
ac97_bus 12462 1 snd_ac97_codec
parport_pc 22036 0
parport 31254 1 parport_pc
pcspkr 12515 0
button 12817 0
mperf 12421 0
processor 27483 0
speedstep_lib 12574 0
cpufreq_userspace 12520 0
cpufreq_stats 12762 0
cpufreq_conservative 12987 0
cpufreq_powersave 12422 0
ext3 138190 3
mbcache 12897 1 ext3
jbd 51377 1 ext3
usbhid 31523 0
hid 60120 1 usbhid
sd_mod 35425 7
crc_t10dif 12332 1 sd_mod
sr_mod 17468 0
cdrom 34813 1 sr_mod
ata_generic 12439 0
floppy 48121 0
uhci_hcd 22337 0
8139too 22028 0
ata_piix 21175 5
ehci_hcd 35509 0
libata 124981 2 ata_piix,ata_generic
thermal 13103 0
fan 12594 0
thermal_sys 17752 3 fan,thermal,processor
8139cp 22245 0
mii 12595 2 8139cp,8139too
usbcore 104352 4 ehci_hcd,uhci_hcd,usbhid
scsi_mod 135194 3 libata,sr_mod,sd_mod
usb_common 12338 1 usbcore

-- /etc/initramfs-tools/modules

-- /etc/kernel-img.conf
do_symlinks = yes
relative_links = yes
do_bootloader = no
do_bootfloppy = no
do_initrd = yes
link_in_boot = no

-- /etc/initramfs-tools/initramfs.conf
MODULES=most
BUSYBOX=y
KEYMAP=n
COMPRESS=gzip
BOOT=local
DEVICE=
NFSROOT=auto

-- /etc/initramfs-tools/update-initramfs.conf
update_initramfs=yes
backup_initramfs=no

-- mkinitramfs hooks
/etc/initramfs-tools/hooks/:

/usr/share/initramfs-tools/hooks:
busybox
dmsetup
fuse
keymap
klibc
kmod
ntfs_3g
thermal
udev


-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages initramfs-tools depends on:
ii cpio 2.11-7
ii klibc-utils 2.0~rc3-1
ii module-init-tools 6-2
ii udev 175-3.1

Versions of packages initramfs-tools recommends:
ii busybox 1:1.19.3-5

Versions of packages initramfs-tools suggests:
ii bash-completion 1:1.99-3

-- no debconf information




I have /sys and /proc in my system. Seems I have other problem

ls -a
...
block
bus
class
dev
devices
firmware
fs
hypervisor
kernel
module
power



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120319162118.1555.7867.reportbug@localhost.local domain">http://lists.debian.org/20120319162118.1555.7867.reportbug@localhost.local domain
 

Thread Tools




All times are GMT. The time now is 01:53 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org