FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-02-2012, 12:19 AM
Jonathan Nieder
 
Default Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated

reassign 661861 src:linux-2.6 3.2.6-1
quit

Hi Jonathan,

Jonathan McCrohan wrote:

> Upgrading from Squeeze to Wheezy on a PC Engines Alix 3C2 [1] results in an
> unbootable system.

Thanks for reporting it. Please attach output from "reportbug
--template linux-image-$(uname -r)", so we can get to know your
system. Full boot logs from a working and non-working kernel would
also be helpful.

See http://wiki.debian.org/InitramfsDebug for more hints.

Hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120302011938.GB5248@burratino">http://lists.debian.org/20120302011938.GB5248@burratino
 
Old 03-03-2012, 01:41 PM
Jonathan McCrohan
 
Default Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated

Hi Jonathan,

On 02/03/12 01:19, Jonathan Nieder wrote:
> Thanks for reporting it. Please attach output from "reportbug
> --template linux-image-$(uname -r)", so we can get to know your
> system. Full boot logs from a working and non-working kernel would
> also be helpful.

I seem to have solved this issue by upgrading the BIOS on the system
from v0.98 to v0.99h. It would be nice to find the root cause of the
issue though so that it doesn't catch others out.

I have attached bootlogs from 2.6.32-5-686 and 3.2.0-1-486 under each
BIOS.

Thanks,
Jon


-- Package-specific info:
** Version:
Linux version 3.2.0-1-486 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 Fri Feb 17 05:23:41 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro console=ttyS0,38400n8 quiet

** Not tainted

** Kernel log:
[ 2.612442] isapnp: No Plug & Play device found
[ 2.612725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.612979] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.613307] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 2.614532] ttyS2: detected caps 00000700 should be 00000500
[ 2.614561] 0000:00:0c.0: ttyS2 at I/O 0x1400 (irq = 9) is a 16C950/954
[ 2.615014] ttyS3: detected caps 00000700 should be 00000500
[ 2.615040] 0000:00:0c.0: ttyS3 at I/O 0x1408 (irq = 9) is a 16C950/954
[ 2.615269] Couldn't register serial port 0000:00:0c.0: -28
[ 2.616112] Linux agpgart interface v0.103
[ 2.617373] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.618259] i8042: No controller found
[ 2.621899] mousedev: PS/2 mouse device common for all mice
[ 2.622406] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.622465] rtc0: alarms up to one day, 114 bytes nvram
[ 2.622790] EISA: Probing bus 0 at eisa.0
[ 2.622819] Cannot allocate resource for EISA slot 1
[ 2.622889] Cannot allocate resource for EISA slot 6
[ 2.622930] EISA: Detected 0 cards.
[ 2.622945] cpuidle: using governor ladder
[ 2.622961] cpuidle: using governor menu
[ 2.624663] TCP cubic registered
[ 2.624812] NET: Registered protocol family 10
[ 2.628425] Mobile IPv6
[ 2.628442] NET: Registered protocol family 17
[ 2.628469] Registering the dns_resolver key type
[ 2.628588] Using IPI Shortcut mode
[ 2.629185] PM: Hibernation image not present or could not be loaded.
[ 2.629235] registered taskstats version 1
[ 2.629906] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 14:27:31 UTC (1330784851)
[ 2.630131] Initializing network drop monitor service
[ 2.630694] Freeing unused kernel memory: 444k freed
[ 2.631632] Write protecting the kernel text: 2564k
[ 2.631830] Write protecting the kernel read-only data: 1044k
[ 2.672140] udevd[42]: starting version 175
[ 2.809522] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 2.809622] via-rhine 0000:00:09.0: setting latency timer to 64
[ 2.874803] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10
[ 2.875554] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
[ 2.998112] SCSI subsystem initialized
[ 3.007367] usbcore: registered new interface driver usbfs
[ 3.007494] usbcore: registered new interface driver hub
[ 3.016007] usbcore: registered new device driver usb
[ 3.018806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.018952] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.018976] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.019060] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.053758] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 3.064011] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.064136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.064161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.064181] usb usb1: Product: EHCI Host Controller
[ 3.064200] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 3.064218] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.064955] hub 1-0:1.0: USB hub found
[ 3.064988] hub 1-0:1.0: 4 ports detected
[ 3.084837] libata version 3.00 loaded.
[ 3.086485] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.099038] scsi0 : pata_amd
[ 3.107303] scsi1 : pata_amd
[ 3.107765] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.107790] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.114445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.114594] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 3.114619] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 3.114679] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 3.114752] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 3.199698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.199727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.199747] usb usb2: Product: OHCI Host Controller
[ 3.199766] usb usb2: Manufacturer: Linux 3.2.0-1-486 ohci_hcd
[ 3.199784] usb usb2: SerialNumber: 0000:00:0f.4
[ 3.201000] hub 2-0:1.0: USB hub found
[ 3.201035] hub 2-0:1.0: 4 ports detected
[ 3.247667] Switching to clocksource tsc
[ 3.271952] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 3.271976] ata1.00: 15662304 sectors, multi 0: LBA
[ 3.287846] ata1.00: configured for UDMA/66
[ 3.288316] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 3.289713] ata2: port disabled--ignoring
[ 3.340631] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3.340941] sd 0:0:0:0: [sda] Write Protect is off
[ 3.340966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.341103] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.345063] sda: sda1 sda2
[ 3.347161] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.710364] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.458136] udevd[172]: starting version 175
[ 4.800701] AMD Geode RNG detected
[ 4.973658] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 5.011525] Intel AES-NI instructions are not detected.
[ 5.250333] geode-aes: GEODE AES engine enabled.
[ 5.251256] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 5.251285] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 5.252326] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 5.438030] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
[ 5.438066] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 5.447386] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 5.712233] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.731470] via-rhine 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

** Model information
not available

** Loaded modules:
scx200_acb
cs5535_mfgpt
i2c_core
evdev
ecb
cryptd
pcspkr
aes_i586
aes_generic
cs5535_mfd
geode_aes
geode_rng
rng_core
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
ata_generic
pata_cs5536
ohci_hcd
pata_amd
libata
ehci_hcd
usbcore
scsi_mod
usb_common
via_rhine
mii

** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: I/O ports at ac1c [size=4]

00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: Geode LX AES

00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
Subsystem: VIA Technologies, Inc. Device [1106:0106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine

00:0c.0 Serial controller [0700]: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) [1415:9501] (prog-if 06 [16950])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1400 [size=32]
Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1440 [size=32]
Region 3: Memory at e0080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

00:0c.1 Bridge [0680]: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (Disabled) [1415:9510]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1480 [size=32]
Region 1: Memory at e00c0000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 14c0 [size=32]
Region 3: Memory at e0100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090]
Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 6100 [size=256]
Region 2: I/O ports at 6200 [size=64]
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 9d00 [size=128]
Region 5: I/O ports at 9c00 [size=64]
Kernel driver in use: cs5535-mfd

00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_amd

00:0f.4 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:0f.5 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd


** Sound cards:

-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)

Kernel: Linux 3.2.0-1-486
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-1-486 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.100
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.2.0-1-486 recommends:
ii firmware-linux-free 3

Versions of packages linux-image-3.2.0-1-486 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-1-486 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-1-486/postinst/missing-firmware-3.2.0-1-486:
linux-image-3.2.0-1-486/prerm/removing-running-kernel-3.2.0-1-486: true
linux-image-3.2.0-1-486/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-486/postinst/depmod-error-initrd-3.2.0-1-486: false
GNU GRUB version 1.99-14


+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+

Use the ^ and v keys to select which entry is highlighted.

Press enter to boot the selected OS, 'e' to edit the commands

before booting or 'c' for a command-line.

Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) Loading Linux 2.6.32-5-686 ...

Loading initial ramdisk ...

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 7000-c000
[ 0.000000] RAMDISK: 0f509000 - 0fcf9d49
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] node 0 low ram: 00000000 - 10000000
[ 0.000000] node 0 bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [000f509000 - 000fcf9d49] RAMDISK ==> [000f509000 - 000fcf9d49]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d3000] BRK ==> [00014cd000 - 00014d3000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65440
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d4000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64928
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 245980k/262144k available (2506k kernel code, 15424k reserved, 1326k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272a57 (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.066 MHz processor.
[ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.13 BogoMIPS (lpj=1992264)
[ 0.020063] Security Framework initialized
[ 0.024024] SELinux: Disabled at boot.
[ 0.028034] Mount-cache hash table entries: 512
[ 0.036091] Initializing cgroup subsys ns
[ 0.040017] Initializing cgroup subsys cpuacct
[ 0.044027] Initializing cgroup subsys devices
[ 0.048015] Initializing cgroup subsys freezer
[ 0.052014] Initializing cgroup subsys net_cls
[ 0.056079] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.060017] CPU: L2 Cache: 128K (32 bytes/line)
[ 0.064034] Performance Events: no PMU driver, software events only.
[ 0.072016] Checking 'hlt' instruction... OK.
[ 0.093447] SMP alternatives: switching to UP code
[ 0.112823] Freeing SMP alternatives: 13k freed
[ 0.116208] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.120015] weird, boot CPU (#0) not listed by the BIOS.
[ 0.124011] SMP motherboard not detected.
[ 0.128013] Local APIC not detected. Using dummy APIC emulation.
[ 0.132011] SMP disabled
[ 0.136391] Brought up 1 CPUs
[ 0.140020] Total of 1 processors activated (996.13 BogoMIPS).
[ 0.144060] CPU0 attaching NULL sched-domain.
[ 0.148408] devtmpfs: initialized
[ 0.156865] regulator: core version 0.5
[ 0.160283] NET: Registered protocol family 16
[ 0.165161] PCI: PCI BIOS revision 2.10 entry at 0xfcc2b, last bus=0
[ 0.168017] PCI: Using configuration type 1 for base access
[ 0.177154] bio: create slab <bio-0> at 0
[ 0.180287] ACPI: Interpreter disabled.
[ 0.184233] vgaarb: loaded
[ 0.188287] PCI: Probing PCI hardware
[ 0.192029] PCI: Probing PCI hardware (bus 00)
[ 0.196174] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f]
[ 0.200188] pci 0000:00:01.2: reg 10 32bit mmio: [0xefff4000-0xefff7fff]
[ 0.204196] pci 0000:00:09.0: reg 10 io port: [0x1000-0x10ff]
[ 0.208025] pci 0000:00:09.0: reg 14 32bit mmio: [0xe0000000-0xe00000ff]
[ 0.212069] pci 0000:00:09.0: supports D1 D2
[ 0.216018] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220019] pci 0000:00:09.0: PME# disabled
[ 0.224121] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007]
[ 0.228062] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff]
[ 0.232063] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f]
[ 0.236076] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f]
[ 0.240061] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f]
[ 0.244192] pci 0000:00:0f.2: reg 20 io port: [0xff00-0xff0f]
[ 0.248154] pci 0000:00:0f.3: reg 10 io port: [0xfe00-0xfe7f]
[ 0.252251] pci 0000:00:0f.4: reg 10 32bit mmio: [0xefffe000-0xefffefff]
[ 0.260157] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.264022] pci 0000:00:0f.4: PME# disabled
[ 0.268146] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefffd000-0xefffdfff]
[ 0.272169] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.276021] pci 0000:00:0f.5: PME# disabled
[ 0.284028] Switching to clocksource tsc
[ 0.294496] pnp: PnP ACPI: disabled
[ 0.304985] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.322158] PnPBIOS: PnP BIOS support was not detected.
[ 0.338845] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.355335] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.374038] NET: Registered protocol family 2
[ 0.387646] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.410009] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.431337] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.450863] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.469930] TCP reno registered
[ 0.479704] NET: Registered protocol family 1
[ 0.493163] Unpacking initramfs...
[ 2.179901] Freeing initrd memory: 8131k freed
[ 2.201054] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.224903] audit: initializing netlink socket (disabled)
[ 2.241124] type=2000 audit(1330777853.241:1): initialized
[ 2.288531] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.318067] VFS: Disk quotas dquot_6.5.2
[ 2.330239] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.350229] msgmni has been set to 497
[ 2.362469] alg: No test for stdrng (krng)
[ 2.374897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.397087] io scheduler noop registered
[ 2.408852] io scheduler anticipatory registered
[ 2.422706] io scheduler deadline registered
[ 2.435803] io scheduler cfq registered (default)
[ 2.450571] isapnp: Scanning for PnP cards...
[ 2.476120] Clocksource tsc unstable (delta = 167988998 ns)
[ 2.529776] Switching to clocksource pit
[ 2.848094] isapnp: No Plug & Play device found
[ 2.858353] Linux agpgart interface v0.103
[ 2.863346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.866654] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.870148] PNP: No PS/2 controller found. Probing ports directly.
[ 2.876948] i8042.c: No controller found.
[ 2.881239] mice: PS/2 mouse device common for all mice
[ 2.885267] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.888932] rtc0: alarms up to one day, 114 bytes nvram
[ 2.896164] cpuidle: using governor ladder
[ 2.900467] cpuidle: using governor menu
[ 2.904453] No iBFT detected.
[ 2.911847] TCP cubic registered
[ 2.914568] NET: Registered protocol family 10
[ 2.925444] Mobile IPv6
[ 2.928833] NET: Registered protocol family 17
[ 2.934244] Using IPI No-Shortcut mode
[ 2.938182] PM: Resume from disk failed.
[ 2.941732] registered taskstats version 1
[ 2.946748] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 12:30:56 UTC (1330777856)
[ 2.952069] Initalizing network drop monitor service
[ 2.955791] Freeing unused kernel memory: 380k freed
[ 2.958972] Write protecting the kernel text: 2508k
[ 2.962000] Write protecting the kernel read-only data: 920k
Loading, please wait...
[ 3.002535] <30>udevd[47]: starting version 175
[ 3.584947] usbcore: registered new interface driver usbfs
[ 3.590318] usbcore: registered new interface driver hub
[ 3.595248] usbcore: registered new device driver usb
[ 3.630038] SCSI subsystem initialized
[ 3.657827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.661578] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.667102] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.671079] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.682898] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.868229] ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
[ 3.874963] libata version 3.00 loaded.
[ 3.901043] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.906411] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.910801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.914781] usb usb1: Product: EHCI Host Controller
[ 3.919137] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 3.923122] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.928635] usb usb1: configuration #1 chosen from 1 choice
[ 3.933769] hub 1-0:1.0: USB hub found
[ 3.937379] hub 1-0:1.0: 4 ports detected
[ 3.941405] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.972859] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10.
[ 3.978647] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1.
[ 3.992335] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.000295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.012046] scsi0 : pata_amd
[ 4.013612] scsi1 : pata_amd
[ 4.018863] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 4.023773] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.027746] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.030427] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.035624] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.038098] ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
[ 4.128280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.132666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.138340] usb usb2: Product: OHCI Host Controller
[ 4.142325] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 4.146783] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.150769] usb usb2: configuration #1 chosen from 1 choice
[ 4.154453] hub 2-0:1.0: USB hub found
[ 4.158075] hub 2-0:1.0: 4 ports detected
[ 4.196628] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.201120] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.224593] ata1.00: configured for UDMA/66
[ 4.229612] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.235323] ata2: port disabled. ignoring.
[ 4.342412] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.346430] sd 0:0:0:0: [sda] Write Protect is off
[ 4.349138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.356166] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.360682] sda: sda1 sda2
[ 4.373426] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.954363] EXT4-fs (sda1): mounted filesystem with ordered data mode

INIT: version 2.88 booting

Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 5.703279] <30>udevd[191]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.091930] cs5535_gpio: base=0x6100 mask=0xb003c66 major=252
[ 6.176991] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.208064] AMD Geode RNG detected
[ 6.267461] <30>udevd[208]: renamed network interface eth0 to eth3
[ 6.721512] padlock: VIA PadLock not detected.
[ 6.793388] geode-aes: GEODE AES engine enabled.
[ 7.010304] cs5535audio 0000:00:0f.3: setting latency timer to 64
[ 7.012794] Failure writing to cs5535 codec
[ 7.017502] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.023666] Failure writing to cs5535 codec
[ 7.028410] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.034549] Failure writing to cs5535 codec
[ 7.039289] Failure writing to cs5535 codec
[ 7.043975] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.047845] Failure writing to cs5535 codec
[ 7.050548] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.054418] Failure writing to cs5535 codec
[ 7.057378] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.064285] Failure writing to cs5535 codec
[ 7.067394] Failure writing to cs5535 codec
[ 7.069705] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.076534] Failure writing to cs5535 codec
[ 7.081239] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.087124] Failure writing to cs5535 codec
[ 7.091809] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.095680] Failure writing to cs5535 codec
[ 7.098640] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.102510] Failure writing to cs5535 codec
[ 7.105472] Failure writing to cs5535 codec
[ 7.110158] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.116524] Failure writing to cs5535 codec
[ 7.121224] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.127109] Failure writing to cs5535 codec
[ 7.131798] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.135668] Failure writing to cs5535 codec
[ 7.138629] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.142499] Failure writing to cs5535 codec
[ 7.145460] Failure writing to cs5535 codec
[ 7.150147] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.156587] Failure writing to cs5535 codec
[ 7.161267] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.167150] Failure writing to cs5535 codec
[ 7.171838] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.175708] Failure writing to cs5535 codec
[ 7.178668] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.182538] Failure writing to cs5535 codec
[ 7.185498] Failure writing to cs5535 codec
[ 7.190188] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.196526] Failure writing to cs5535 codec
[ 7.201229] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.207111] Failure writing to cs5535 codec
[ 7.211800] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.215670] Failure writing to cs5535 codec
[ 7.218630] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.222500] Failure writing to cs5535 codec
[ 7.225462] Failure writing to cs5535 codec
[ 7.230150] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.236528] Failure writing to cs5535 codec
[ 7.241217] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.247102] Failure writing to cs5535 codec
[ 7.251788] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.255658] Failure writing to cs5535 codec
[ 7.258619] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.262489] Failure writing to cs5535 codec
[ 7.265449] Failure writing to cs5535 codec
[ 7.270137] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.276530] Failure writing to cs5535 codec
[ 7.281231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.287113] Failure writing to cs5535 codec
[ 7.291802] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.295672] Failure writing to cs5535 codec
[ 7.298633] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.302503] Failure writing to cs5535 codec
[ 7.305465] Failure writing to cs5535 codec
[ 7.310154] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.316532] Failure writing to cs5535 codec
[ 7.321220] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.327104] Failure writing to cs5535 codec
[ 7.331791] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.335661] Failure writing to cs5535 codec
[ 7.338621] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.342491] Failure writing to cs5535 codec
[ 7.345452] Failure writing to cs5535 codec
[ 7.350141] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.356536] Failure writing to cs5535 codec
[ 7.361231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.367118] Failure writing to cs5535 codec
[ 7.371805] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.375675] Failure writing to cs5535 codec
[ 7.378635] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.382505] Failure writing to cs5535 codec
[ 7.385466] Failure writing to cs5535 codec
[ 7.390154] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.396537] Failure writing to cs5535 codec
[ 7.401221] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.407106] Failure writing to cs5535 codec
[ 7.411793] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.415663] Failure writing to cs5535 codec
[ 7.418624] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.422494] Failure writing to cs5535 codec
[ 7.425454] Failure writing to cs5535 codec
[ 7.430141] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.436539] Failure writing to cs5535 codec
[ 7.441235] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.447122] Failure writing to cs5535 codec
[ 7.451805] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.455675] Failure writing to cs5535 codec
[ 7.458638] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.462508] Failure writing to cs5535 codec
[ 7.465468] Failure writing to cs5535 codec
[ 7.470159] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.476543] Failure writing to cs5535 codec
[ 7.481224] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.487108] Failure writing to cs5535 codec
[ 7.491794] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.495664] Failure writing to cs5535 codec
[ 7.498627] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.502497] Failure writing to cs5535 codec
[ 7.505457] Failure writing to cs5535 codec
[ 7.510146] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.516543] Failure writing to cs5535 codec
[ 7.521237] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.527122] Failure writing to cs5535 codec
[ 7.531808] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.535678] Failure writing to cs5535 codec
[ 7.538640] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.542510] Failure writing to cs5535 codec
[ 7.545470] Failure writing to cs5535 codec
[ 7.550161] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.556547] Failure writing to cs5535 codec
[ 7.561253] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.567138] Failure writing to cs5535 codec
[ 7.571823] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.575693] Failure writing to cs5535 codec
[ 7.578655] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.582525] Failure writing to cs5535 codec
[ 7.585487] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.591631] Failure writing to cs5535 codec
[ 7.596318] Failure writing to cs5535 codec
[ 7.600190] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.604548] Failure writing to cs5535 codec
[ 7.609242] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.615125] Failure writing to cs5535 codec
[ 7.619814] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.623684] Failure writing to cs5535 codec
[ 7.626644] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.630515] Failure writing to cs5535 codec
[ 7.633476] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.639622] Failure writing to cs5535 codec
[ 7.644306] Failure writing to cs5535 codec
[ 7.648178] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.652552] Failure writing to cs5535 codec
[ 7.657231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.663125] Failure writing to cs5535 codec
[ 7.667803] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.671673] Failure writing to cs5535 codec
[ 7.674636] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.678506] Failure writing to cs5535 codec
[ 7.681467] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.695341] Failure writing to cs5535 codec
[ 7.700105] Failure writing to cs5535 codec
[ 7.703934] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.708578] Failure writing to cs5535 codec
[ 7.713289] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.719192] Failure writing to cs5535 codec
[ 7.723877] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.727748] Failure writing to cs5535 codec
[ 7.730712] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.734579] Failure writing to cs5535 codec
[ 7.737541] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.743688] Failure writing to cs5535 codec
[ 7.748412] Failure writing to cs5535 codec
[ 7.753114] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.760566] Failure writing to cs5535 codec
[ 7.765246] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.771128] Failure writing to cs5535 codec
[ 7.775819] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.779688] Failure writing to cs5535 codec
[ 7.782650] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.786519] Failure writing to cs5535 codec
[ 7.789482] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.795625] Failure writing to cs5535 codec
[ 7.800312] Failure writing to cs5535 codec
[ 7.804182] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.808562] Failure writing to cs5535 codec
[ 7.813261] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.819146] Failure writing to cs5535 codec
[ 7.823833] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.827702] Failure writing to cs5535 codec
[ 7.830664] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.834535] Failure writing to cs5535 codec
[ 7.837497] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.843640] Failure writing to cs5535 codec
[ 7.848326] Failure writing to cs5535 codec
[ 7.852197] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.856564] Failure writing to cs5535 codec
[ 7.861251] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.867134] Failure writing to cs5535 codec
[ 7.871823] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.875693] Failure writing to cs5535 codec
[ 7.878653] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.882524] Failure writing to cs5535 codec
[ 7.885488] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.891631] Failure writing to cs5535 codec
[ 7.896316] Failure writing to cs5535 codec
[ 7.900188] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.904566] Failure writing to cs5535 codec
[ 7.909265] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.915150] Failure writing to cs5535 codec
[ 7.919839] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.923708] Failure writing to cs5535 codec
[ 7.926670] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.930540] Failure writing to cs5535 codec
[ 7.933502] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.939645] Failure writing to cs5535 codec
[ 7.944331] Failure writing to cs5535 codec
[ 7.948203] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.952570] Failure writing to cs5535 codec
[ 7.957256] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.963140] Failure writing to cs5535 codec
[ 7.967830] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.971699] Failure writing to cs5535 codec
[ 7.974661] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.978531] Failure writing to cs5535 codec
[ 7.981492] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.987636] Failure writing to cs5535 codec
[ 7.992322] Failure writing to cs5535 codec
[ 7.996194] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.000571] Failure writing to cs5535 codec
[ 8.005272] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 8.011157] Failure writing to cs5535 codec
[ 8.015846] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.019715] Failure writing to cs5535 codec
[ 8.022676] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.026546] Failure writing to cs5535 codec
[ 8.029509] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 8.035651] Failure writing to cs5535 codec
[ 8.040338] Failure writing to cs5535 codec
[ 8.044210] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.048574] Failure writing to cs5535 codec
[ 8.053262] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 8.059146] Failure writing to cs5535 codec
[ 8.063836] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.067705] Failure writing to cs5535 codec
[ 8.070692] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.074562] Failure writing to cs5535 codec
[ 8.077525] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 8.084461] Failure writing to cs5535 codec
[ 8.089162] Failure writing to cs5535 codec
[ 8.093850] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.100468] AC'97 0 does not respond - RESET
[ 8.105409] Failure writing to cs5535 codec
[ 8.110096] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.116240] Failure writing to cs5535 codec
[ 8.120111] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.122956] AC'97 0 access is not valid [0xffffffff], removing mixer.
[ 8.126943] mixer failed
[ 8.130282] cs5535audio: probe of 0000:00:0f.3 failed with error -5
done.
Activating swap...done.
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up ALSA...warning: 'alsactl restore' failed with error message 'alsactl: load_state:1686: No soundcards found...'...done.
Setting kernel variables ...done.
Give root password for maintenance
(or type Control-D to continue):
GNU GRUB version 1.99-14


+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+

Use the ^ and v keys to select which entry is highlighted.

Press enter to boot the selected OS, 'e' to edit the commands

before booting or 'c' for a command-line.

Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Loading Linux 3.2.0-1-486 ...

Loading initial ramdisk ...

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-486 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 Fri Feb 17 05:23:41 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 17fc000-1800000
[ 0.000000] RAMDISK: 0f3ed000 - 0fcf3000
[ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65424
[ 0.000000] free_area_init_node: node 0, pgdat c13bf2f8, node_mem_map cfdff200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 245316k/262144k available (2560k kernel code, 16380k reserved, 1306k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13c7000 - 0xc1436000 ( 444 kB)
[ 0.000000] .data : 0xc128032c - 0xc13c6b40 (1306 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128032c (2560 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cec06000 soft=cec08000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.020 MHz processor.
[ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.04 BogoMIPS (lpj=1992080)
[ 0.020014] pid_max: default: 32768 minimum: 301
[ 0.024225] Security Framework initialized
[ 0.028025] AppArmor: AppArmor disabled by boot time parameter
[ 0.032078] Mount-cache hash table entries: 512
[ 0.036406] Initializing cgroup subsys cpuacct
[ 0.040024] Initializing cgroup subsys memory
[ 0.044039] Initializing cgroup subsys devices
[ 0.048017] Initializing cgroup subsys freezer
[ 0.052016] Initializing cgroup subsys net_cls
[ 0.056016] Initializing cgroup subsys blkio
[ 0.060153] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[ 0.073478] Performance Events: no PMU driver, software events only.
[ 0.080384] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.084557] devtmpfs: initialized
[ 0.089497] print_constraints: dummy:
[ 0.092275] NET: Registered protocol family 16
[ 0.096588] EISA bus registered
[ 0.100904] PCI: PCI BIOS revision 2.10 entry at 0xfcc2b, last bus=0
[ 0.104019] PCI: Using configuration type 1 for base access
[ 0.113624] bio: create slab <bio-0> at 0
[ 0.116355] ACPI: Interpreter disabled.
[ 0.120328] vgaarb: loaded
[ 0.124287] PCI: Probing PCI hardware
[ 0.128022] PCI: Probing PCI hardware (bus 00)
[ 0.132255] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[ 0.136050] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
[ 0.140182] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[ 0.144062] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]
[ 0.148245] pci 0000:00:09.0: [1106:3053] type 0 class 0x000200
[ 0.152046] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff]
[ 0.156035] pci 0000:00:09.0: reg 14: [mem 0xe0000000-0xe00000ff]
[ 0.160108] pci 0000:00:09.0: supports D1 D2
[ 0.164027] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168028] pci 0000:00:09.0: PME# disabled
[ 0.172081] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[ 0.176120] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
[ 0.180109] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
[ 0.184111] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
[ 0.188163] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
[ 0.192110] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
[ 0.196154] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[ 0.204093] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]
[ 0.208183] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[ 0.212089] pci 0000:00:0f.3: reg 10: [io 0xfe00-0xfe7f]
[ 0.216325] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[ 0.220098] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]
[ 0.224317] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.228034] pci 0000:00:0f.4: PME# disabled
[ 0.232101] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[ 0.236101] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]
[ 0.240326] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.244036] pci 0000:00:0f.5: PME# disabled
[ 0.250010] PCI: pci_cache_line_size set to 32 bytes
[ 0.252662] Switching to clocksource pit
[ 0.264033] pnp: PnP ACPI: disabled
[ 0.266540] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.271742] PnPBIOS: PnP BIOS support was not detected.
[ 0.288327] PCI: max bus depth: 0 pci_try_num: 1
[ 0.290227] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.294970] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.297988] NET: Registered protocol family 2
[ 0.303373] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.309177] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.310534] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.313993] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.321058] TCP reno registered
[ 0.322502] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.328035] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.331112] NET: Registered protocol family 1
[ 0.336404] PCI: CLS 32 bytes, default 32
[ 0.340723] Unpacking initramfs...
[ 2.387570] Freeing initrd memory: 9240k freed
[ 2.403364] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.407592] audit: initializing netlink socket (disabled)
[ 2.411844] type=2000 audit(1330777889.408:1): initialized
[ 2.565492] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.569109] VFS: Disk quotas dquot_6.5.2
[ 2.573041] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.576875] msgmni hn set to 497
[ 2.580901] alg: No test for stdrng (krng)
[ 2.585325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.587520] io scheduler noop registered
[ 2.591316] io scheduler deadline registered
[ 2.596248] io scheduler cfq registered (default)
[ 2.599606] isapnp: Scanning for PnP cards...
[ 2.960286] isapnp: No Plug & Play device found
[ 2.962161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.973508] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.977453] Linux agpgart interface v0.103
[ 2.978997] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.984250] i8042: No controller found
[ 2.987897] mousedev: PS/2 mouse device common for all mice
[ 2.993117] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.996244] rtc0: alarms up to one day, 114 bytes nvram
[ 3.000237] EISA: Probing bus 0 at eisa.0
[ 3.004290] Cannot allocate resource for EISA slot 1
[ 3.007246] Cannot allocate resource for EISA slot 6
[ 3.010168] EISA: Detected 0 cards.
[ 3.016648] cpuidle: using governor ladder
[ 3.020968] cpuidle: using governor menu
[ 3.026430] TCP cubic registered
[ 3.032267] NET: Registered protocol family 10
[ 3.041330] Mobile IPv6
[ 3.044705] NET: Registered protocol family 17
[ 3.046072] Registering the dns_resolver key type
[ 3.052274] Using IPI Shortcut mode
[ 3.055344] PM: Hibernation image not present or could not be loaded.
[ 3.058709] registered taskstats version 1
[ 3.063594] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 12:31:32 UTC (1330777892)
[ 3.068855] Initializing network drop monitor service
[ 3.072566] Freeing unused kernel memory: 444k freed
[ 3.076347] Write protecting the kernel text: 2564k
[ 3.079185] Write protecting the kernel read-only data: 1044k
Loading, please wait...
[ 3.126244] udevd[42]: starting version 175
[ 3.264725] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.336118] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.401296] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10
[ 3.405081] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.407118] Switching to clocksource tsc
[ 3.464171] SCSI subsystem initialized
[ 3.477234] usbcore: registered new interface driver usbfs
[ 3.585148] usbcore: registered new interface driver hub
[ 3.602746] usbcore: registered new device driver usb
[ 3.621373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.645438] libata version 3.00 loaded.
[ 3.659844] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.677356] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.695684] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.741762] ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
[ 3.769726] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.787076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.807446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.829093] usb usb1: Product: EHCI Host Controller
[ 3.843731] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 3.861227] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.876364] hub 1-0:1.0: USB hub found
[ 3.887649] hub 1-0:1.0: 4 ports detected
[ 3.900048] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.918420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.940346] scsi0 : pata_amd
[ 3.949880] scsi1 : pata_amd
[ 3.959160] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.980061] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.005664] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.023207] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.048711] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.070965] ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
[ 4.173719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.194076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.215727] usb usb2: Product: OHCI Host Controller
[ 4.230366] usb usb2: Manufacturer: Linux 3.2.0-1-486 ohci_hcd
[ 4.247863] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.262907] hub 2-0:1.0: USB hub found
[ 4.274211] hub 2-0:1.0: 4 ports detected
[ 4.318850] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.335311] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.366027] ata1.00: configured for UDMA/66
[ 4.379028] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.404895] ata2: port disabled--ignoring
[ 4.464197] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.488159] sd 0:0:0:0: [sda] Write Protect is off
[ 4.502572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.517873] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.548615] sda: sda1 sda2
[ 4.559157] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.945582] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.966212] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.009881] Clocksource tsc unstable (delta = 148048492 ns)
[ 5.026835] Switching to clocksource pit
[ 5.081190] EXT4-fs (sda1): recovery complete
[ 5.090062] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

INIT: version 2.88 booting

Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 5.853392] udevd[176]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.187205] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 6.193677] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 6.197493] AMD Geode RNG detected
[ 6.280090] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 6.349733] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.415839] udevd[196]: renamed network interface eth0 to eth3
[ 6.495052] Intel AES-NI instructions are not detected.
[ 6.862167] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
GNU GRUB version 1.99-14


+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+

Use the ^ and v keys to select which entry is highlighted.

Press enter to boot the selected OS, 'e' to edit the commands

before booting or 'c' for a command-line.

Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode)
 
Old 03-04-2012, 06:37 AM
Jonathan Nieder
 
Default Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated

Jonathan McCrohan wrote:

> I seem to have solved this issue by upgrading the BIOS on the system
> from v0.98 to v0.99h.

Thanks. Does v0.98d, v0.99g, or v0.99 work, too? (The changelog
entry "Setup: change HDD slave to V (avoid accidental change)" sounds
vaguely promising.)

Jonathan
who hopes the BIOS changelog might have a hint



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120304073729.GH14725@burratino">http://lists.debian.org/20120304073729.GH14725@burratino
 
Old 03-04-2012, 05:17 PM
Jonathan McCrohan
 
Default Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated

On 04/03/12 07:37, Jonathan Nieder wrote:
> Thanks. Does v0.98d, v0.99g, or v0.99 work, too? (The changelog
> entry "Setup: change HDD slave to V (avoid accidental change)" sounds
> vaguely promising.)

I didn't test each intervening version. I have since reinstalled the
machine into its remote location. I will test it again when I get
physical access to it (if the BIOS updater allows downgrades).

I'm also attaching the Alix BIOS changelog referenced in the last post
for completeness.

Jon
How to upgrade the BIOS
-----------------------

1. Use a CF card that boots FreeDOS or similar.

Copy sb.com and alix*.bin to the CF card. Execute sb.com, this will
automatically select the right file and upgrade flash. DO NOT RENAME FILES.

Please see www.pcengines.ch/freedos.htm for details on how to prepare
a bootable FreeDOS CF card.

2. Serial port upgrade

Enter BIOS setup by pressing S during memory test. Then press X to start
transfer, and start a X-Modem 1K (CRC) upload / send in your communication
program. For alix.2* send alix2.upd, for alix.3* send alix3.upd.

Please note that all BIOS setup options are reset to default by the upgrade.

ALIX tinyBIOS revision history
------------------------------

v0.99h pd 081105 Enable banked extensions for CS5536 UARTs.

v0.99g pd 081002 Add support for ALIX.4 board.

v0.99f pd 080919 Experimental: swap INTD and USB interrupt assignment
to avoid Mikrotik conflict between USB and non-existent
secondary IDE...

Experimental: enable HD_EDD, fix drive geometry report.

v0.99e pd 080907 Correct COM2 port setup to I/O 02F8.

v0.99d pd 080618 Enable CS5536 COM2 port for ALIX.6B and ALIX.2D
boards.

v0.99c pd 080222 USB gang power control to enable higher power USB
modification.

v0.99b pd 080111 Add PCI table entry for Commell MP-541
dual LAN miniPCI card.

v0.99 pd 071210 Setup: changed description from Etherboot to PXE boot

v0.98j pd 071206 Setup: add late PCI init option to support
FPGA based miniPCI cards that take a long time
to wake up... (symptom: no interrupt assigned)

v0.98h pd 071203 Change to BIOS controlled PXE module

v0.98g pd 071126 Fix CS5536 serial port flow control

v0.98f pd 071126 Disable audio section

v0.98e pd 071125 Serial console: allow Int 14 init to disable interrupt.
Setup: add UDMA option

v0.98d pd 071115 Setup: change HDD slave to V (avoid accidental change)
Setup: add MFGPT workaround option

v0.98c pd 071113 Alternate version without MFGPT reset

v0.98b pd 071101 Fix UART initialization

v0.98 pd 071031 Skip DLL status check

v0.97 pd 071026 Back to 400 MHz DRAM clock for ALIX.3*2

v0.96 pd 071025 Always do HDD wait if enabled

v0.95 pd 071024 Use 333 MHz DRAM clock for ALIX.3*2

v0.94 pd 071023 Force MFGPT timer reset (undocumented MSR 5140002B per
workaround in AMD Linux driver)

Fixed a bug in PCI BIOS find device function

Auto detect DRAM clock to set correct refresh interval

v0.93 pd 071021 Add port 92 reset support

Setup: add 19200 baud option

v0.92 pd 071003 Add HDD wait option, adds some delay to allow
detection of conventional HDDs.

Disable CS5536 diverse device power management
to avoid MFGPT / interrupt issues.

MFGPT issues: please observe AMD CS5536 data book
section 5.16.3, incorrect initialization sequence
will HANG the system.

v0.90 pd 070925 Remap audio and USB interrupts to offload regular
PCI interrupts.

IRQ7 is no longer directed to the LPC bus, used
as a default interrupt for MFGPT high resolution timer.

Implement BIOS setup. Press S during memory test
to enter.

Add UMB (upper memory block) support.

ALIX / tinyBIOS quirks
----------------------

A20 gate

A20 gate is always "open", prefer performance over support for
broken legacy code.

HDD master / slave

To reduce boot time, slave drives are not detected by default.
Change the option in setup if required.

HDD wait

Hard disk drives need more time to wake up, enable HDD wait in
setup if necessary.

LPT IRQ

IRQ7 is intentionally unmapped to allow use for MFGPT high speed
timer.

PXE boot

Use setup to enable, or press N during memory test to select
network boot for this startup only.

Reboot

Best method to reboot ALIX.2 / ALIX.3 boards is to use either port 92
or the dedicated reset registers in CS5536.

RTC wake-up

One customer reported strange behavior on ALIX.1C, set wake-up
time to 999999 if problems occur.

UMB

To support UMB (upper memory block), unused shadow RAM between
C000 and E000 is left read/writeable.

Open issues
-----------

HDD support

tinyBIOS does not include large HDD support (> about 40 GB) yet.

PCI boot ROMs

Not handled correctly by tinyBIOS.

PCI bridges

tinyBIOS bridge support is questionable, if in doubt send PCI dump +
maybe sample hardware to PC Engines.

VGA

ALIX.1C tinyBIOS does not support video. Use Award BIOS for this.

Flash layout for ALIX pd 070921
---------------------

The layout is controlled by the batch files used to build the BIOS,
for example lx3.bat.

00000 - 0FFFF Config block (only first few bytes used, but the flash device
has 64KB erase blocks)

10000 - 3FFFF unused

40000 - 47FFF unused / video BIOS (future use)

48000 - 5FFFF unused

60000 - 6FFFF PXE BIOS

70000 - 77FFF SMI module

78000 - 78FFF unused, space for runtime copy of config block

79000 - 7FFFF tinyBIOS core

Memory layout for ALIX
----------------------

00000 - 9FFFF RW base 640K RAM

A0000 - BFFFF - unused / VGA memory

C0000 - C7FFF RO unused / video BIOS

C8000 - DFFFF - unused

E0000 - EFFFF RW PXE BIOS

F0000 - F7FFF RW SMI module

F8000 - F8FFF RO runtime copy of config block

F9000 - FFFFF RO tinyBIOS core

PCI Interrupt map
-----------------

Please note that ALIX.2A / ALIX.3A boards have a different mapping, please
ask for specific BIOS images for these boards.

PCI dev AD line Int map Description

00 .. - unused

08 AD11 INTA Geode LX host bridge (crypto)

10..30 12..16 - unused

38 AD17 INTB miniPCI1 secondary device (Commell hack)

40 AD18 - unused

48 AD19 INTB LAN1 (right)

50 AD20 INTC LAN2 (middle)

58 AD21 INTD LAN3 (left)

60 AD22 INTA, INTB miniPCI 1

68 AD23 - unused

70 AD24 INTC, INTD miniPCI2

78 AD25 INTA .. INTD Geode CS5536

80..F8 .. - unused

Interrupt map
-------------

IRQ0 timer
IRQ1 KBD (LPC)
IRQ2 cascade
IRQ3 COM2 serial (LPC)
IRQ4 COM1 serial (internal / LPC)
IRQ5 audio (CS5536)
IRQ6 FDC (LPC)
IRQ7 spare, used for MFGPT high resolution timer

IRQ8 RTC
IRQ9 PCI INTA
IRQ10 PCI INTB
IRQ11 PCI INTC
IRQ12 USB (CS5536)
IRQ13 floating point
IRQ14 IDE HDD
IRQ15 PCI INTD
 
Old 03-05-2012, 12:27 AM
Jonathan Nieder
 
Default Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated

tags 661861 + moreinfo
quit

Jonathan McCrohan wrote:

> I didn't test each intervening version. I have since reinstalled the
> machine into its remote location. I will test it again when I get
> physical access to it (if the BIOS updater allows downgrades).

Sounds good. If you have network access could you attach output from
"reportbug --template linux-image-$(uname -r)" on the working system,
for reference?

Thanks,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120305012710.GA30292@burratino">http://lists.debian.org/20120305012710.GA30292@burratino
 

Thread Tools




All times are GMT. The time now is 03:23 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org