FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-28-2012, 06:46 AM
Arne Nordmark
 
Default Bug#661581: linux-image-3.2.0-0.bpo.1-amd64: Fails to resume from suspend on ASUS P67-M mainboard

Package: linux-2.6
Version: 3.2.4-1~bpo60+1
Severity: normal
Tags: patch

Some newer ASUS mainboards fails to resume from suspend on
Linux. Instead the computer immediately restarts a few times, and then
does a full boot. This has been traced to an ACPI problem, and a symtom
is the kernel messages:


Feb 19 01:13:55 ano1 kernel: [ 0.493066] ACPI Error: [RAMB] Namespace
lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Feb 19 01:13:55 ano1 kernel: [ 0.493070] ACPI Exception:
AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region)
(20110623/nsinit-349)


When applying the commit
<http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=8931d9ea78848b073bf299594f148 b83abde4a5e>
to the current kernel sources from backports, the error messages
disappears, and resume functionality is restored.


It would be nice to have this fix in wheezy.

Thanks
Arne

-- Package-specific info:
** Version:
Linux version 3.2.0-0.bpo.1-amd64 (Debian 3.2.4-1~bpo60+1)
(nordmark@mech.kth.se) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon
Feb 27 11:19:28 CET 2012


** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.1-amd64 root=/dev/mapper/part2-root
ro enable_mtrr_cleanup quiet


** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[29165.078180] pata_jmicron 0000:07:00.1: restoring config space at
offset 0x5 (was 0x1, writing 0xc031)
[29165.078186] pata_jmicron 0000:07:00.1: restoring config space at
offset 0x4 (was 0x1, writing 0xc041)
[29165.078196] pata_jmicron 0000:07:00.1: restoring config space at
offset 0x1 (was 0x100000, writing 0x100005)
[29165.078266] r8169 0000:08:00.0: restoring config space at offset 0x1
(was 0x100007, writing 0x100407)
[29165.078370] xhci_hcd 0000:09:00.0: restoring config space at offset
0x1 (was 0x100006, writing 0x100402)

[29165.078404] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
[29165.078410] xhci_hcd 0000:09:00.0: PME# disabled
[29165.078455] PM: early resume of devices complete after 1.295 msecs
[29165.078565] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23

[29165.078578] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[29165.078594] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22

[29165.078601] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[29165.078626] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[29165.078632] pci 0000:00:1c.4: setting latency timer to 64
[29165.078654] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23

[29165.078660] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[29165.078666] ahci 0000:00:1f.2: setting latency timer to 64
[29165.078669] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
[29165.078690] radeon 0000:01:00.0: setting latency timer to 64
[29165.078692] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17

[29165.078701] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[29165.078732] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[29165.078742] pci 0000:05:00.0: setting latency timer to 64
[29165.078757] ahci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[29165.078771] pata_jmicron 0000:07:00.1: PCI INT B -> GSI 18 (level,
low) -> IRQ 18

[29165.078775] ahci 0000:07:00.0: setting latency timer to 64
[29165.078794] pata_jmicron 0000:07:00.1: setting latency timer to 64
[29165.078811] pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
[29165.078829] r8169 0000:08:00.0: PME# disabled
[29165.078850] snd_hda_intel 0000:01:00.1: irq 56 for MSI/MSI-X
[29165.078884] xhci_hcd 0000:09:00.0: setting latency timer to 64
[29165.078910] usb usb3: root hub lost power or was reset
[29165.078911] usb usb4: root hub lost power or was reset
[29165.079884] parport_pc 00:03: activated
[29165.080717] serial 00:09: activated
[29165.086038] xhci_hcd 0000:09:00.0: irq 49 for MSI/MSI-X
[29165.086048] xhci_hcd 0000:09:00.0: irq 50 for MSI/MSI-X
[29165.086051] xhci_hcd 0000:09:00.0: irq 51 for MSI/MSI-X
[29165.086053] xhci_hcd 0000:09:00.0: irq 52 for MSI/MSI-X
[29165.086056] xhci_hcd 0000:09:00.0: irq 53 for MSI/MSI-X
[29165.093419] [drm] PCIE GART of 512M enabled (table at
0x0000000000040000).

[29165.093474] radeon 0000:01:00.0: WB enabled
[29165.094542] sd 1:0:0:0: [sdb] Starting disk
[29165.094565] sd 2:0:0:0: [sdc] Starting disk
[29165.094567] sd 0:0:0:0: [sda] Starting disk
[29165.117175] r8169 0000:08:00.0: eth0: link down
[29165.139248] [drm] ring test succeeded in 1 usecs
[29165.139265] [drm] ib test succeeded in 0 usecs
[29165.146602] firewire_core: skipped bus generations, destroying all nodes
[29165.398276] ata7: SATA link down (SStatus 0 SControl 300)
[29165.430229] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[29165.483465] ata5.00: configured for UDMA/100
[29165.574272] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
[29165.604232] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880212cbc500
[29165.604237] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8802149f8380
[29165.604246] usb 3-1: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[29165.604250] usb 3-1: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes

[29165.646032] firewire_core: rediscovered device fw0
[29167.657403] r8169 0000:08:00.0: eth0: link up
[29170.453542] ata3: link is slow to respond, please be patient (ready=0)
[29170.461535] ata2: link is slow to respond, please be patient (ready=0)
[29170.473526] ata1: link is slow to respond, please be patient (ready=0)
[29171.468603] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29171.480991] ata2.00: configured for UDMA/133
[29173.214980] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29173.393300] ata1.00: configured for UDMA/133
[29175.097219] ata3: COMRESET failed (errno=-16)
[29176.983471] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29176.999750] ata3.00: configured for UDMA/133
[29177.008884] PM: resume of devices complete after 11941.474 msecs
[29177.008968] PM: Finishing wakeup.
[29177.008969] Restarting tasks ... done.
[29177.036602] r8169 0000:08:00.0: eth0: link down
[29180.181449] r8169 0000:08:00.0: eth0: link up
[29181.123566] nfs4_reclaim_open_state: Lock reclaim failed!

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1501
board_vendor: ASUSTeK Computer INC.
board_name: P8P67-M
board_version: Rev x.0x

** Loaded modules:
openafs(P)
acpi_cpufreq
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
ppdev
lp
bridge
stp
bnep
rfcomm
bluetooth
binfmt_misc
fuse
des_generic
cbc
rpcsec_gss_krb5
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
coretemp
firewire_sbp2
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
radeon
snd_hwdep
snd_pcm
snd_seq
eeepc_wmi
asus_wmi
ttm
sparse_keymap
rfkill
drm_kms_helper
drm
snd_timer
snd_seq_device
i2c_i801
i2c_algo_bit
snd
i2c_core
pci_hotplug
power_supply
usb_storage
soundcore
hid_a4tech
snd_page_alloc
wmi
uas
processor
button
psmouse
evdev
tpm_tis
tpm
tpm_bios
parport_pc
parport
serio_raw
pcspkr
thermal_sys
ext4
mbcache
jbd2
crc16
usbhid
hid
dm_mod
raid10
md_mod
sg
ata_generic
sr_mod
cdrom
sd_mod
crc_t10dif
pata_jmicron
xhci_hcd
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
ehci_hcd
r8169
mii
libata
scsi_mod
usbcore
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000

link/ether f4:6d:04:8f:c1:62 brd ff:ff:ff:ff:ff:ff
inet 130.237.233.218/28 brd 130.237.233.223 scope global eth0
inet6 2001:6b0:1:1e90::40:3/128 scope global
valid_lft forever preferred_lft forever
inet6 fe80::f66d:4ff:fe8f:c162/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 72:58:dc:72:ce:b6 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 115143 1724 0 0 0 0 0 0
115143 1724 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth0: 470016282 490904 0 0 0 0 0 0
381969317 480164 0 9 0 0 0 0


*** Protocol statistics:
Ip:
474641 total packets received
149 with invalid addresses
0 forwarded
0 incoming packets discarded
474492 incoming packets delivered
472998 requests sent out
Icmp:
24 ICMP messages received
1 input ICMP message failed.
ICMP input histogram:
destination unreachable: 2
timeout in transit: 12
echo requests: 9
echo replies: 1
15 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 5
echo request: 1
echo replies: 9
IcmpMsg:
InType0: 1
InType3: 2
InType8: 9
InType11: 12
OutType0: 9
OutType3: 5
OutType8: 1
Tcp:
1558 active connections openings
236 passive connection openings
18 failed connection attempts
206 connection resets received
8 connections established
476235 segments received
464650 segments send out
52 segments retransmited
3 bad segments received.
508 resets sent
Udp:
3125 packets received
5 packets to unknown port received.
0 packet receive errors
13294 packets sent
UdpLite:
TcpExt:
12 resets received for embryonic SYN_RECV sockets
7 packets pruned from receive queue because of socket buffer overrun
506 TCP sockets finished time wait in fast timer
2 time wait sockets recycled by time stamp
3863 delayed acks sent
3 delayed acks further delayed because of locked socket
Quick ack mode was activated 22 times
5205 packets directly queued to recvmsg prequeue.
5840660 bytes directly in process context from backlog
1721305 bytes directly received in process context from prequeue
322034 packet headers predicted
9272 packets header predicted and directly queued to user
4172 acknowledgments not containing data payload received
163311 predicted acknowledgments
15 congestion windows recovered without slow start after partial ack
1 timeouts after SACK recovery
1 retransmits in slow start
30 other TCP timeouts
357 packets collapsed in receive queue due to low socket buffer
7 DSACKs sent for old packets
11 DSACKs received
26 connections reset due to unexpected data
120 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShiftFallback: 8
IpExt:
InMcastPkts: 103
OutMcastPkts: 48
InBcastPkts: 2424
InOctets: 457483387
OutOctets: 373858028
InMcastOctets: 20727
OutMcastOctets: 11959
InBcastOctets: 529799


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM
Controller [8086:0100] (rev 09)

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+ INTx-

Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge PCI Express
Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:16.0 Communication controller [0780]: Intel Corporation Cougar Point
HECI Controller #1 [8086:1c3a] (rev 04)

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+

Latency: 0
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fe708000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe707000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
Definition Audio Controller [8086:1c20] (rev 05)

Subsystem: ASUSTeK Computer Inc. Device [1043:8444]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev b5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR+

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe706000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller
[8086:1c46] (rev 05)

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port
SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at fe705000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller
[8086:1c22] (rev 05)

Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV730XT
[Radeon HD 4670] [1002:9490] (prog-if 00 [VGA controller])

Subsystem: PC Partner Limited Device [174b:e101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe620000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fe600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon

01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: PC Partner Limited R700 Audio Device [Radeon HD 4000 Series]
[174b:aa38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 56
Region 0: Memory at fe630000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

05:00.0 PCI bridge [0604]: Device [1b21:1080] (rev 01) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR+

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

06:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10
[OHCI])

Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe500000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

07:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE
[197b:2361] (rev 10) (prog-if 01 [AHCI 1.0])

Subsystem: ASUSTeK Computer Inc. Device [1043:843f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fe410000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci

07:00.1 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE
controller [197b:0368] (rev 10) (prog-if 85 [Master SecO PriO])

Subsystem: JMicron Technology Corp. Device [197b:1368]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at c040 [size=8]
Region 1: I/O ports at c030 [size=4]
Region 2: I/O ports at c020 [size=8]
Region 3: I/O ports at c010 [size=4]
Region 4: I/O ports at c000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron

08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: I/O ports at b000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169

09:00.0 USB Controller [0c03]: Device [1b21:1042] (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe300000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd


** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 04d9:0022 Holtek Semiconductor, Inc. Portable
Keyboard

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 008: ID 0424:4064 Standard Microsystems Corp. Ultra Fast
Media Reader

Bus 001 Device 007: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 001 Device 006: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 005: ID 0781:b7b9 SanDisk Corp.
Bus 001 Device 004: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an
initramfs

ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux
kernel mo


Versions of packages linux-image-3.2.0-0.bpo.1-amd64 recommends:
ii firmware-linux-free 2.6.32-41 Binary firmware for various
driver


Versions of packages linux-image-3.2.0-0.bpo.1-amd64 suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader,
version

pn linux-doc-3.2 <none> (no description available)

Versions of packages linux-image-3.2.0-0.bpo.1-amd64 is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various
driver

pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information excluded



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4F4C8660.60706@mech.kth.se">http://lists.debian.org/4F4C8660.60706@mech.kth.se
 

Thread Tools




All times are GMT. The time now is 09:11 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org