Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy (http://www.linux-archive.org/debian-kernel/635661-bug-658401-atheros-ar9285-wi-fi-adapter-not-working-hp-630-notebook-wheezy.html)

Gábor Illés 02-21-2012 06:18 AM

Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy
 
Dear Jonathan,

Thank you for your response.
Here is the lsmod output:

Module Size Used by
pci_stub 12429 1
vboxpci 19066 0
vboxnetadp 13155 0
vboxnetflt 23571 0
vboxdrv 189938 3 vboxpci,vboxnetadp,vboxnetflt
acpi_cpufreq 12935 1
mperf 12453 1 acpi_cpufreq
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
cpufreq_stats 12866 0
cpufreq_powersave 12454 0
parport_pc 22364 0
ppdev 12763 0
lp 17149 0
parport 31858 3 parport_pc,ppdev,lp
bnep 17567 2
rfcomm 33656 0
binfmt_misc 12957 1
uinput 17440 1
nfsd 211858 2
nfs 312062 0
lockd 67328 2 nfsd,nfs
fscache 36739 1 nfs
auth_rpcgss 37143 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 173671 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
fuse 61981 3
loop 22641 0
snd_hda_codec_hdmi 30783 1
uvcvideo 57744 0
videodev 70889 1 uvcvideo
media 18148 2 uvcvideo,videodev
v4l2_compat_ioctl32 16655 1 videodev
ath3k 12671 0
btusb 17502 0
bluetooth 119406 12 bnep,rfcomm,ath3k,btusb
hid_logitech_dj 17247 0
joydev 17266 0
arc4 12458 2
ath9k 73540 0
snd_hda_codec_realtek 188599 1
snd_hda_intel 26345 2
mac80211 192768 1 ath9k
radeon 643235 3
ttm 48725 1 radeon
snd_hda_codec 77994 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel
ath9k_common 12728 1 ath9k
ath9k_hw 322017 2 ath9k,ath9k_common
rts_pstor 261770 0
snd_hwdep 13186 1 snd_hda_codec
drm_kms_helper 27227 1 radeon
drm 167670 5 radeon,ttm,drm_kms_helper
snd_pcm 63900 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq 45093 0
i2c_algo_bit 12841 1 radeon
snd_seq_device 13176 1 snd_seq
video 17628 0
battery 13109 0
i2c_i801 16870 0
hp_wmi 13329 0
i2c_core 23876 6
videodev,radeon,drm_kms_helper,drm,i2c_algo_bit,i2 c_i801
sparse_keymap 12760 1 hp_wmi
ath 21370 3 ath9k,ath9k_common,ath9k_hw
snd_timer 22917 2 snd_pcm,snd_seq
cfg80211 137140 3 ath9k,mac80211,ath
snd 52850 13
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_s eq_device,snd_timer
soundcore 13065 1 snd
iTCO_wdt 17081 0
snd_page_alloc 13003 2 snd_hda_intel,snd_pcm
rfkill 19012 5 bluetooth,hp_wmi,cfg80211
iTCO_vendor_support 12704 1 iTCO_wdt
psmouse 64455 0
pcspkr 12579 0
evdev 17562 19
serio_raw 12931 0
wmi 13243 1 hp_wmi
ac 12624 0
power_supply 13475 3 radeon,battery,ac
processor 28059 1 acpi_cpufreq
button 12937 0
ext4 350557 2
mbcache 13065 1 ext4
jbd2 62015 1 ext4
crc16 12343 2 bluetooth,ext4
usbhid 36379 1 hid_logitech_dj
hid 81288 2 hid_logitech_dj,usbhid
sr_mod 21899 0
sd_mod 36136 5
cdrom 35401 1 sr_mod
crc_t10dif 12348 1 sd_mod
ahci 24997 4
libahci 22860 1 ahci
libata 140589 2 ahci,libahci
scsi_mod 162417 4 rts_pstor,sr_mod,sd_mod,libata
r8169 46980 0
mii 12675 1 r8169
ehci_hcd 40215 0
thermal 17383 0
thermal_sys 18040 3 video,processor,thermal
usbcore 128498 6 uvcvideo,ath3k,btusb,usbhid,ehci_hcd
usb_common 12354 1 usbcore

and the dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1)
(waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun
Feb 5 15:17:15 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64
root=UUID=d5495c56-985b-4b93-ae81-4d1b147b091a ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf63f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf63f000 - 00000000bf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 630 Notebook PC
/3675, BIOS F.32 11/07/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bf639000-bf63f000
[ 0.000000] RAMDISK: 36bd8000 - 375e4000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bf7fe120 00074 (v01 HPQOEM SLIC-MPC
00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 HPQOEM SLIC-MPC
00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bf7eb000 0D88A (v02 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bf76d000 00040
[ 0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bf7ea000 00176 (v01 HPQOEM SLIC-MPC
00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000bf7e6000 00028 (v01 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bf7e3000 00034 (v04 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 00000000bf7e2000 00224 (v01 HP INSYDE
00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e1000 009F1 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880133800000-ffff880136ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf63f
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1013196
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765560 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf63f000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf6bf000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7bf000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82304
r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 995719
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64
root=UUID=d5495c56-985b-4b93-ae81-4d1b147b091a ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909692k/5111808k available (3368k kernel code,
1059024k absent, 143092k reserved, 3361k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2393.870 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4787.74 BogoMIPS (lpj=9575480)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000051] AppArmor: AppArmor disabled by boot time parameter
[ 0.000359] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.001645] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002220] Mount-cache hash table entries: 256
[ 0.002345] Initializing cgroup subsys cpuacct
[ 0.002350] Initializing cgroup subsys memory
[ 0.002362] Initializing cgroup subsys devices
[ 0.002366] Initializing cgroup subsys freezer
[ 0.002367] Initializing cgroup subsys net_cls
[ 0.002370] Initializing cgroup subsys blkio
[ 0.002402] CPU: Physical Processor ID: 0
[ 0.002403] CPU: Processor Core ID: 0
[ 0.002409] mce: CPU supports 9 MCE banks
[ 0.002419] CPU0: Thermal monitoring handled by SMI
[ 0.002427] using mwait in idle threads.
[ 0.002824] ACPI: Core revision 20110623
[ 0.041732] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081346] CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz stepping 05
[ 0.187333] Performance Events: PEBS fmt1+, Westmere events, Intel
PMU driver.
[ 0.187341] ... version: 3
[ 0.187342] ... bit width: 48
[ 0.187343] ... generic registers: 4
[ 0.187345] ... value mask: 0000ffffffffffff
[ 0.187346] ... max period: 000000007fffffff
[ 0.187347] ... fixed-purpose events: 3
[ 0.187349] ... event mask: 000000070000000f
[ 0.187578] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.187692] Booting Node 0, Processors #1
[ 0.187695] smpboot cpu 1: start_ip = 97000
[ 0.275203] CPU1: Thermal monitoring handled by SMI
[ 0.295308] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.295439] #2
[ 0.295441] smpboot cpu 2: start_ip = 97000
[ 0.383011] CPU2: Thermal monitoring handled by SMI
[ 0.403043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.403174] #3
[ 0.403176] smpboot cpu 3: start_ip = 97000
[ 0.490822] CPU3: Thermal monitoring handled by SMI
[ 0.510879] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.510921] Brought up 4 CPUs
[ 0.510923] Total of 4 processors activated (19151.42 BogoMIPS).
[ 0.513498] devtmpfs: initialized
[ 0.517368] PM: Registering ACPI NVS region at bf6bf000 (1048576 bytes)
[ 0.517572] print_constraints: dummy:
[ 0.517634] NET: Registered protocol family 16
[ 0.517734] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.517737] ACPI: bus type pci registered
[ 0.517825] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.517829] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.541146] PCI: Using configuration type 1 for base access
[ 0.541773] bio: create slab <bio-0> at 0
[ 0.541875] ACPI: Added _OSI(Module Device)
[ 0.541877] ACPI: Added _OSI(Processor Device)
[ 0.541879] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.541881] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.543707] ACPI: EC: Look up EC in DSDT
[ 0.545520] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.570745] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.571338] ACPI: SSDT 00000000bf691918 00432 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.571814] ACPI: Dynamic OEM Table Load:
[ 0.571816] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.572030] ACPI: SSDT 00000000bf68f018 00891 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.572477] ACPI: Dynamic OEM Table Load:
[ 0.572480] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.595034] ACPI: SSDT 00000000bf690a98 00303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.595582] ACPI: Dynamic OEM Table Load:
[ 0.595585] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.606812] ACPI: SSDT 00000000bf68ed98 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.607299] ACPI: Dynamic OEM Table Load:
[ 0.607302] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 2.875812] ACPI: Interpreter enabled
[ 2.875817] ACPI: (supports S0 S3 S4 S5)
[ 2.875865] ACPI: Using IOAPIC for interrupt routing
[ 2.912052] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.912244] ACPI: No dock devices found.
[ 2.912246] HEST: Table not found.
[ 2.912249] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 2.912744] \_SB_.PCI0:_OSC invalid UUID
[ 2.912746] _OSC request data:1 8 1f
[ 2.912750] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.913588] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 2.913591] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 2.913593] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 2.913596] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfeafffff]
[ 2.913609] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 2.913626] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU
for graphics
[ 2.913650] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 2.913682] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.913686] pci 0000:00:01.0: PME# disabled
[ 2.913733] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 2.913763] pci 0000:00:16.0: reg 10: [mem 0xd6104000-0xd610400f 64bit]
[ 2.913854] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.913859] pci 0000:00:16.0: PME# disabled
[ 2.913899] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 2.914357] pci 0000:00:1a.0: reg 10: [mem 0xd610a000-0xd610a3ff]
[ 2.917060] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.917065] pci 0000:00:1a.0: PME# disabled
[ 2.917098] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 2.917118] pci 0000:00:1b.0: reg 10: [mem 0xd6100000-0xd6103fff 64bit]
[ 2.917214] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.917219] pci 0000:00:1b.0: PME# disabled
[ 2.917247] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 2.917348] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.917353] pci 0000:00:1c.0: PME# disabled
[ 2.917384] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 2.917483] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.917488] pci 0000:00:1c.2: PME# disabled
[ 2.917519] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 2.917619] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.917624] pci 0000:00:1c.4: PME# disabled
[ 2.917661] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 2.918116] pci 0000:00:1d.0: reg 10: [mem 0xd6109000-0xd61093ff]
[ 2.920814] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.920819] pci 0000:00:1d.0: PME# disabled
[ 2.920845] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 2.920931] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 2.921061] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 2.921088] pci 0000:00:1f.2: reg 10: [io 0x5048-0x504f]
[ 2.921099] pci 0000:00:1f.2: reg 14: [io 0x5054-0x5057]
[ 2.921110] pci 0000:00:1f.2: reg 18: [io 0x5040-0x5047]
[ 2.921121] pci 0000:00:1f.2: reg 1c: [io 0x5050-0x5053]
[ 2.921132] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 2.921144] pci 0000:00:1f.2: reg 24: [mem 0xd6108000-0xd61087ff]
[ 2.921211] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.921216] pci 0000:00:1f.2: PME# disabled
[ 2.921239] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 2.921260] pci 0000:00:1f.3: reg 10: [mem 0xd6106000-0xd61060ff 64bit]
[ 2.921291] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 2.921359] pci 0000:01:00.0: [1002:68e4] type 0 class 0x000300
[ 2.921376] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 2.921390] pci 0000:01:00.0: reg 18: [mem 0xd6000000-0xd601ffff 64bit]
[ 2.921400] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]
[ 2.921417] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 2.921449] pci 0000:01:00.0: supports D1 D2
[ 2.921469] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 2.921483] pci 0000:01:00.1: reg 10: [mem 0xd6020000-0xd6023fff 64bit]
[ 2.921549] pci 0000:01:00.1: supports D1 D2
[ 2.921585] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.921588] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.921591] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd60fffff]
[ 2.921594] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xcfffffff 64bit pref]
[ 2.921724] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 2.921750] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 2.921863] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 2.921933] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 2.922224] pci 0000:02:00.0: supports D1 D2
[ 2.922226] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.922241] pci 0000:02:00.0: PME# disabled
[ 2.922329] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.922334] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 2.922339] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 2.922347] pci 0000:00:1c.0: bridge window [mem
0xd0000000-0xd0ffffff 64bit pref]
[ 2.922442] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 2.922484] pci 0000:03:00.0: reg 10: [mem 0xd4000000-0xd400ffff 64bit]
[ 2.922687] pci 0000:03:00.0: supports D1
[ 2.922689] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 2.922698] pci 0000:03:00.0: PME# disabled
[ 2.922779] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 2.922784] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 2.922789] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd4ffffff]
[ 2.922796] pci 0000:00:1c.2: bridge window [mem
0xd1000000-0xd1ffffff 64bit pref]
[ 2.922933] pci 0000:04:00.0: [10ec:5209] type 0 class 0x00ff00
[ 2.922996] pci 0000:04:00.0: reg 10: [mem 0xd3000000-0xd3000fff]
[ 2.923504] pci 0000:04:00.0: supports D1 D2
[ 2.923506] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 2.923521] pci 0000:04:00.0: PME# disabled
[ 2.923685] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 2.923689] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 2.923694] pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff]
[ 2.923702] pci 0000:00:1c.4: bridge window [mem
0xd2000000-0xd2ffffff 64bit pref]
[ 2.923776] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 2.923790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 2.923793] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 2.923795] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 2.923798] pci 0000:00:1e.0: bridge window [mem
0xc0000000-0xfeafffff] (subtractive decode)
[ 2.923827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.924091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 2.924146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 2.924245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 2.924297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 2.924348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 2.924462] \_SB_.PCI0:_OSC invalid UUID
[ 2.924463] _OSC request data:1 1f 1f
[ 2.924467] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.924510] \_SB_.PCI0:_OSC invalid UUID
[ 2.924512] _OSC request data:1 0 1d
[ 2.924515] pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[ 2.924517] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.928524] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 2.928613] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 2.928634] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 2.928654] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 2.928672] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 2.928689] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 2.928707] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 2.928738] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 2.928741] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 2.928742] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.929024] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 2.929079] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 2.929133] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 2.929187] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 2.929241] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 2.929295] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 2.929349] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 2.929404] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 2.929523] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 2.929529] vgaarb: loaded
[ 2.929530] vgaarb: bridge control possible 0000:01:00.0
[ 2.929567] PCI: Using ACPI for IRQ routing
[ 2.939390] PCI: pci_cache_line_size set to 64 bytes
[ 2.939502] reserve RAM buffer: 000000000009cc00 - 000000000009ffff
[ 2.939504] reserve RAM buffer: 00000000bf63f000 - 00000000bfffffff
[ 2.939507] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 2.939631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.939636] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.941654] Switching to clocksource hpet
[ 2.943532] pnp: PnP ACPI init
[ 2.943548] ACPI: bus type pnp registered
[ 2.943973] pnp 00:00: [bus 00-fe]
[ 2.943976] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.943978] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.943980] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.943983] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.943985] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 2.943987] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 2.943989] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 2.943991] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 2.943993] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 2.943996] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 2.943999] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 2.944001] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 2.944003] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 2.944005] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 2.944007] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 2.944009] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 2.944011] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 2.944013] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[ 2.944072] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 2.944117] pnp 00:01: [io 0x0000-0x001f]
[ 2.944119] pnp 00:01: [io 0x0081-0x0091]
[ 2.944121] pnp 00:01: [io 0x0093-0x009f]
[ 2.944122] pnp 00:01: [io 0x00c0-0x00df]
[ 2.944125] pnp 00:01: [dma 4]
[ 2.944152] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.944162] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.944189] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.944295] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.944326] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.944338] pnp 00:04: [io 0x00f0]
[ 2.944348] pnp 00:04: [irq 13]
[ 2.944375] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.944387] pnp 00:05: [io 0x002e-0x002f]
[ 2.944389] pnp 00:05: [io 0x004e-0x004f]
[ 2.944391] pnp 00:05: [io 0x0061]
[ 2.944392] pnp 00:05: [io 0x0063]
[ 2.944394] pnp 00:05: [io 0x0065]
[ 2.944396] pnp 00:05: [io 0x0067]
[ 2.944397] pnp 00:05: [io 0x0070]
[ 2.944399] pnp 00:05: [io 0x0080]
[ 2.944401] pnp 00:05: [io 0x0092]
[ 2.944402] pnp 00:05: [io 0x00b2-0x00b3]
[ 2.944404] pnp 00:05: [io 0x0680-0x069f]
[ 2.944406] pnp 00:05: [io 0x0800-0x080f]
[ 2.944408] pnp 00:05: [io 0x0810-0x0813]
[ 2.944410] pnp 00:05: [io 0xffff]
[ 2.944412] pnp 00:05: [io 0x0400-0x047f]
[ 2.944414] pnp 00:05: [io 0x0500-0x057f]
[ 2.944416] pnp 00:05: [io 0x164e-0x164f]
[ 2.944428] pnp 00:05: disabling [io 0x164e-0x164f] because it
overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
[ 2.944474] system 00:05: [io 0x0680-0x069f] has been reserved
[ 2.944477] system 00:05: [io 0x0800-0x080f] has been reserved
[ 2.944479] system 00:05: [io 0x0810-0x0813] has been reserved
[ 2.944482] system 00:05: [io 0xffff] has been reserved
[ 2.944485] system 00:05: [io 0x0400-0x047f] has been reserved
[ 2.944487] system 00:05: [io 0x0500-0x057f] has been reserved
[ 2.944490] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.944500] pnp 00:06: [io 0x0070-0x0077]
[ 2.944506] pnp 00:06: [irq 8]
[ 2.944534] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.944546] pnp 00:07: [io 0x0060]
[ 2.944548] pnp 00:07: [io 0x0064]
[ 2.944553] pnp 00:07: [irq 1]
[ 2.944581] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.944594] pnp 00:08: [irq 12]
[ 2.944623] pnp 00:08: Plug and Play ACPI device, IDs SYN1e4b
SYN1e00 SYN0002 PNP0f13 (active)
[ 2.944932] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 2.944934] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 2.944936] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 2.944938] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 2.944940] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 2.944943] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 2.944945] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 2.944947] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 2.944949] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 2.944951] pnp 00:09: [mem 0xd6200000-0xd6200fff]
[ 2.945014] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.945017] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 2.945019] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.945022] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.945025] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.945027] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.945030] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.945033] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.945036] system 00:09: [mem 0xd6200000-0xd6200fff] has been reserved
[ 2.945039] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.965584] pnp 00:0a: [bus ff]
[ 2.965628] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 2.965645] pnp: PnP ACPI: found 11 devices
[ 2.965646] ACPI: ACPI bus type pnp unregistered
[ 2.972817] pci 0000:01:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 2.972826] PCI: max bus depth: 1 pci_try_num: 2
[ 2.972869] pci 0000:01:00.0: BAR 6: assigned [mem
0xd6040000-0xd605ffff pref]
[ 2.972872] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.972874] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.972878] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd60fffff]
[ 2.972881] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xcfffffff 64bit pref]
[ 2.972884] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.972888] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 2.972894] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 2.972899] pci 0000:00:1c.0: bridge window [mem
0xd0000000-0xd0ffffff 64bit pref]
[ 2.972906] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 2.972910] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 2.972916] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd4ffffff]
[ 2.972921] pci 0000:00:1c.2: bridge window [mem
0xd1000000-0xd1ffffff 64bit pref]
[ 2.972929] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 2.972932] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 2.972939] pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff]
[ 2.972943] pci 0000:00:1c.4: bridge window [mem
0xd2000000-0xd2ffffff 64bit pref]
[ 2.972951] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 2.972977] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.972981] pci 0000:00:01.0: setting latency timer to 64
[ 2.972993] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.972998] pci 0000:00:1c.0: setting latency timer to 64
[ 2.973008] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.973012] pci 0000:00:1c.2: setting latency timer to 64
[ 2.973020] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.973025] pci 0000:00:1c.4: setting latency timer to 64
[ 2.973033] pci 0000:00:1e.0: setting latency timer to 64
[ 2.973037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.973039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.973041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.973043] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 2.973045] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 2.973047] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd60fffff]
[ 2.973049] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff
64bit pref]
[ 2.973052] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 2.973054] pci_bus 0000:02: resource 1 [mem 0xd5000000-0xd5ffffff]
[ 2.973056] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff
64bit pref]
[ 2.973058] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 2.973060] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd4ffffff]
[ 2.973062] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff
64bit pref]
[ 2.973064] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 2.973066] pci_bus 0000:04: resource 1 [mem 0xd3000000-0xd3ffffff]
[ 2.973068] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd2ffffff
64bit pref]
[ 2.973070] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 2.973072] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 2.973074] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.973076] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xfeafffff]
[ 2.973158] NET: Registered protocol family 2
[ 2.973309] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 2.974297] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 2.976584] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.976874] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.976876] TCP reno registered
[ 2.976886] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.976913] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.977070] NET: Registered protocol family 1
[ 3.005448] pci 0000:01:00.0: Boot video device
[ 3.005491] PCI: CLS 64 bytes, default 64
[ 3.005540] Unpacking initramfs...
[ 3.216738] Freeing initrd memory: 10288k freed
[ 3.218977] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.218982] Placing 64MB software IO TLB between ffff8800bb639000 -
ffff8800bf639000
[ 3.218984] software IO TLB at phys 0xbb639000 - 0xbf639000
[ 3.219005] Simple Boot Flag at 0x44 set to 0x1
[ 3.219567] audit: initializing netlink socket (disabled)
[ 3.219580] type=2000 audit(1329811464.040:1): initialized
[ 3.240459] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.255732] VFS: Disk quotas dquot_6.5.2
[ 3.255768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.255847] msgmni has been set to 7656
[ 3.256028] alg: No test for stdrng (krng)
[ 3.256069] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 3.256073] io scheduler noop registered
[ 3.256074] io scheduler deadline registered
[ 3.256098] io scheduler cfq registered (default)
[ 3.256199] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.256228] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.256529] intel_idle: MWAIT substates: 0x1120
[ 3.256531] intel_idle: v0.4 model 0x25
[ 3.256532] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.256599] ERST: Table is not found!
[ 3.256600] GHES: HEST is not enabled!
[ 3.256672] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.425191] Linux agpgart interface v0.103
[ 3.425387] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 3.432067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.432074] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.432219] mousedev: PS/2 mouse device common for all mice
[ 3.432272] rtc_cmos 00:06: RTC can wake from S4
[ 3.432397] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.432429] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.432566] cpuidle: using governor ladder
[ 3.432757] cpuidle: using governor menu
[ 3.432937] TCP cubic registered
[ 3.433089] NET: Registered protocol family 10
[ 3.433684] Mobile IPv6
[ 3.433687] NET: Registered protocol family 17
[ 3.433690] Registering the dns_resolver key type
[ 3.433986] PM: Hibernation image not present or could not be loaded.
[ 3.433997] registered taskstats version 1
[ 3.442249] rtc_cmos 00:06: setting system clock to 2012-02-21
08:04:24 UTC (1329811464)
[ 3.442314] Initializing network drop monitor service
[ 3.443559] Freeing unused kernel memory: 568k freed
[ 3.443639] Write protecting the kernel read-only data: 6144k
[ 3.446560] Freeing unused kernel memory: 712k freed
[ 3.449342] Freeing unused kernel memory: 684k freed
[ 3.449939] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.467606] udevd[59]: starting version 175
[ 3.502712] usbcore: registered new interface driver usbfs
[ 3.502745] usbcore: registered new interface driver hub
[ 3.507166] usbcore: registered new device driver usb
[ 3.507729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.507764] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.507790] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.507796] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.507825] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 3.507867] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.511806] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.511831] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd610a000
[ 3.521276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.521316] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.521386] r8169 0000:02:00.0: setting latency timer to 64
[ 3.521595] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 3.522136] r8169 0000:02:00.0: eth0: RTL8168e/8111e at
0xffffc90000660000, 2c:76:8a:dd:eb:a8, XID 0c200000 IRQ 41
[ 3.522141] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 3.523409] SCSI subsystem initialized
[ 3.525844] libata version 3.00 loaded.
[ 3.536564] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.536622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.536628] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.536636] usb usb1: Product: EHCI Host Controller
[ 3.536638] usb usb1: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 3.536640] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.536868] hub 1-0:1.0: USB hub found
[ 3.536874] hub 1-0:1.0: 3 ports detected
[ 3.536975] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.537004] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.537008] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.537017] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 3.537047] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.541002] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.541031] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd6109000
[ 3.552624] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.552627] ACPI: Thermal Zone [TSZ0] (21 C)
[ 3.556623] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.556665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.556672] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.556674] usb usb2: Product: EHCI Host Controller
[ 3.556676] usb usb2: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 3.556678] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.556962] hub 2-0:1.0: USB hub found
[ 3.556970] hub 2-0:1.0: 3 ports detected
[ 3.557058] ahci 0000:00:1f.2: version 3.0
[ 3.557081] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.557150] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 3.557226] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3
Gbps 0x3 impl SATA mode
[ 3.557230] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led
clo pio slum part ems apst
[ 3.557238] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.565273] scsi0 : ahci
[ 3.565503] scsi1 : ahci
[ 3.565677] scsi2 : ahci
[ 3.565834] scsi3 : ahci
[ 3.565937] ata1: SATA max UDMA/133 abar m2048@0xd6108000 port
0xd6108100 irq 42
[ 3.565944] ata2: SATA max UDMA/133 abar m2048@0xd6108000 port
0xd6108180 irq 42
[ 3.565949] ata3: DUMMY
[ 3.565952] ata4: DUMMY
[ 3.592557] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.592561] ACPI: Thermal Zone [TSZ1] (25 C)
[ 3.848030] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.887987] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.888026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.890405] ata1.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
[ 3.890411] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.891752] ata2.00: ATAPI: hp DVDRAM GT31N, NMR0, max UDMA/100
[ 3.892987] ata1.00: configured for UDMA/133
[ 3.893337] scsi 0:0:0:0: Direct-Access ATA WDC
WD5000BPVT-6 01.0 PQ: 0 ANSI: 5
[ 3.895694] ata2.00: configured for UDMA/100
[ 3.898725] scsi 1:0:0:0: CD-ROM hp DVDRAM GT31N
NMR0 PQ: 0 ANSI: 5
[ 3.903029] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 3.903037] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.903380] sd 0:0:0:0: [sda] Write Protect is off
[ 3.903389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.903480] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.906895] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.906902] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.907125] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.974454] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.975467] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.980456] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.980464] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.980896] hub 1-1:1.0: USB hub found
[ 3.981021] hub 1-1:1.0: 6 ports detected
[ 4.091606] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.215374] Refined TSC clocksource calibration: 2394.003 MHz.
[ 4.215384] Switching to clocksource tsc
[ 4.224062] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.224070] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.224594] hub 2-1:1.0: USB hub found
[ 4.224745] hub 2-1:1.0: 8 ports detected
[ 4.295451] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[ 4.387600] usb 1-1.2: New USB device found, idVendor=058f, idProduct=6254
[ 4.387608] usb 1-1.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.388023] hub 1-1.2:1.0: USB hub found
[ 4.388081] hub 1-1.2:1.0: 4 ports detected
[ 4.459164] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[ 4.595420] usb 1-1.3: New USB device found, idVendor=05c8, idProduct=021e
[ 4.595428] usb 1-1.3: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 4.595434] usb 1-1.3: Product: HP Webcam-101
[ 4.595438] usb 1-1.3: Manufacturer: HP Webcam-101
[ 4.595442] usb 1-1.3: SerialNumber: HP Webcam-101
[ 4.670791] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 4.763392] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=311d
[ 4.763400] usb 1-1.4: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.854651] usb 1-1.2.3: new full-speed USB device number 6 using ehci_hcd
[ 4.973352] usb 1-1.2.3: New USB device found, idVendor=03f0, idProduct=1024
[ 4.973360] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=5
[ 4.973366] usb 1-1.2.3: Product: HP USB Smart Card Keyboard
[ 4.973371] usb 1-1.2.3: Manufacturer: Hewlett-Packard Company
[ 4.973375] usb 1-1.2.3: SerialNumber: 08196b25
[ 4.985181] input: Hewlett-Packard Company HP USB Smart Card
Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input1
[ 4.985394] generic-usb 0003:03F0:1024.0001: input,hidraw0: USB HID
v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on
usb-0000:00:1a.0-1.2.3/input0
[ 4.985445] usbcore: registered new interface driver usbhid
[ 4.985450] usbhid: USB HID core driver
[ 5.062051] usb 1-1.2.4: new full-speed USB device number 7 using ehci_hcd
[ 5.173728] usb 1-1.2.4: New USB device found, idVendor=046d, idProduct=c52b
[ 5.173736] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.173741] usb 1-1.2.4: Product: USB Receiver
[ 5.173745] usb 1-1.2.4: Manufacturer: Logitech
[ 5.644668] PM: Starting manual resume from disk
[ 5.644672] PM: Hibernation image partition 8:5 present
[ 5.644673] PM: Looking for hibernation image.
[ 5.644966] PM: Image not found (code -22)
[ 5.644971] PM: Hibernation image not present or could not be loaded.
[ 5.680177] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.595895] udevd[309]: starting version 175
[ 8.393537] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 8.400273] ACPI: Lid Switch [LID]
[ 8.400370] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.400377] ACPI: Power Button [PWRB]
[ 8.400441] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.400445] ACPI: Power Button [PWRF]
[ 8.472105] ACPI: AC Adapter [AC] (on-line)
[ 8.492482] wmi: Mapper loaded
[ 8.545559] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.639830] iTCO_vendor_support: vendor-support=0
[ 8.740597] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.740732] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 8.740894] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.762706] cfg80211: Calling CRDA to update world regulatory domain
[ 8.876619] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 8.881711] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level,
low) -> IRQ 19
[ 8.881717] ACPI: resource 0000:00:1f.3 [io 0x5000-0x501f]
conflicts with ACPI region SMBI [io 0x5000-0x500f]
[ 8.881719] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.931317] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.970130] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 8.970147] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 8.970170] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 8.970556] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 8.970564] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 8.970576] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 8.987311] acpi device:0c: registered as cooling_device4
[ 8.987467] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input7
[ 8.987596] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.029528] [drm] Initialized drm 1.1.0 20060810
[ 9.060906] rts_pstor: module is from the staging directory, the
quality is unknown, you have been warned.
[ 9.061869] Initializing Realtek PCIE storage driver...
[ 9.061908] rts_pstor 0000:04:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 9.061954] Resource length: 0x1000
[ 9.061972] Original address: 0xd3000000, remapped address:
0xffffc90000668000
[ 9.061978] pci->irq = 16
[ 9.061979] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
[ 9.061995] rts_pstor 0000:04:00.0: setting latency timer to 64
[ 9.139976] [drm] radeon kernel modesetting enabled.
[ 9.140066] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 9.140072] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 9.140089] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.140100] radeon 0000:01:00.0: setting latency timer to 64
[ 9.140475] [drm] initializing kernel modesetting (CEDAR
0x1002:0x68E4 0x103C:0x3675).
[ 9.140547] [drm] register mmio base: 0xD6000000
[ 9.140550] [drm] register mmio size: 131072
[ 9.140891] ATOM BIOS: HP
[ 9.141037] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 -
0x000000001FFFFFFF (512M used)
[ 9.141044] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 -
0x000000003FFFFFFF
[ 9.142479] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.142483] [drm] RAM width 64bits DDR
[ 9.142653] [TTM] Zone kernel: Available graphics memory: 1960972 kiB.
[ 9.142655] [TTM] Initializing pool allocator.
[ 9.142691] [drm] radeon: 512M of VRAM memory ready
[ 9.142694] [drm] radeon: 512M of GTT memory ready.
[ 9.142715] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.142718] [drm] Driver supports precise vblank timestamp query.
[ 9.142773] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[ 9.142779] radeon 0000:01:00.0: radeon: using MSI.
[ 9.142844] [drm] radeon: irq initialized.
[ 9.142850] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.143671] [drm] Loading CEDAR Microcode
[ 9.153261] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 9.153336] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9.153365] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.237429] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 9.239102] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.239194] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.262875] scsi4 : SCSI emulation for PCI-Express Mass Storage devices
[ 9.263221] rts_pstor: waiting for device to settle before scanning
[ 9.368129] ath9k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.368153] ath9k 0000:03:00.0: setting latency timer to 64
[ 9.419146] ath: EEPROM regdomain: 0x60
[ 9.419149] ath: EEPROM indicates we should expect a direct regpair map
[ 9.419153] ath: Country alpha2 being used: 00
[ 9.419155] ath: Regpair used: 0x60
[ 9.434667] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 9.434886] radeon 0000:01:00.0: WB enabled
[ 9.442079] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5,
id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 9.451788] [drm] ring test succeeded in 1 usecs
[ 9.452014] [drm] radeon: ib pool ready.
[ 9.452141] [drm] ib test succeeded in 0 usecs
[ 9.452570] [drm] Radeon Display Connectors
[ 9.452572] [drm] Connector 0:
[ 9.452573] [drm] LVDS
[ 9.452577] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568
0x656c 0x656c
[ 9.452579] [drm] Encoders:
[ 9.452580] [drm] LCD1: INTERNAL_UNIPHY
[ 9.452582] [drm] Connector 1:
[ 9.452584] [drm] HDMI-A
[ 9.452585] [drm] HPD1
[ 9.452587] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438
0x643c 0x643c
[ 9.452589] [drm] Encoders:
[ 9.452591] [drm] DFP1: INTERNAL_UNIPHY1
[ 9.452592] [drm] Connector 2:
[ 9.452594] [drm] VGA
[ 9.452596] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0
0x64e4 0x64e4
[ 9.452598] [drm] Encoders:
[ 9.452600] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.452791] [drm] Internal thermal controller without fan control
[ 9.452844] [drm] radeon: power management initialized
[ 9.475106] ieee80211 phy0: Selected rate control algorithm
'ath9k_rate_control'
[ 9.476086] Registered led device: ath9k-phy0
[ 9.476102] ieee80211 phy0: Atheros AR9285 Rev:2
mem=0xffffc900110c0000, irq=18
[ 9.492096] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 9.869375] [drm] fb mappable at 0xC0142000
[ 9.869378] [drm] vram apper at 0xC0000000
[ 9.869379] [drm] size 4325376
[ 9.869380] [drm] fb depth is 24
[ 9.869382] [drm] pitch is 5632
[ 9.869482] fbcon: radeondrmfb (fb0) is primary device
[ 9.888200] WARNING! power/level is deprecated; use power/control instead
[ 9.919140] logitech-djreceiver 0003:046D:C52B.0004:
hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1a.0-1.2.4/input2
[ 9.921310] input: Logitech Unifying Device. Wireless PID:101a as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.2/0003:046D:C52B.0004/input/input12
[ 9.921416] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2:
USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on
usb-0000:00:1a.0-1.2.4:1
[ 10.136739] Bluetooth: Core ver 2.16
[ 10.136771] NET: Registered protocol family 31
[ 10.136776] Bluetooth: HCI device and connection manager initialized
[ 10.136779] Bluetooth: HCI socket layer initialized
[ 10.136780] Bluetooth: L2CAP socket layer initialized
[ 10.136784] Bluetooth: SCO socket layer initialized
[ 10.157958] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.158014] usbcore: registered new interface driver btusb
[ 10.166899] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 10.170880] Bluetooth: Error loading firmware
[ 10.170899] ath3k: probe of 1-1.4:1.0 failed with error -5
[ 10.170967] usbcore: registered new interface driver ath3k
[ 10.258980] Linux media interface: v0.10
[ 10.261098] rts_pstor: device scan complete
[ 10.261371] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S.
1.00 PQ: 0 ANSI: 0 CCS
[ 10.261472] Bad LUN (0:1)
[ 10.261634] Bad target number (1:0)
[ 10.261774] Bad target number (2:0)
[ 10.261910] Bad target number (3:0)
[ 10.262046] Bad target number (4:0)
[ 10.262184] Bad target number (5:0)
[ 10.262319] Bad target number (6:0)
[ 10.262439] Bad target number (7:0)
[ 10.263063] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 10.288347] Linux video capture interface: v2.00
[ 10.325496] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
[ 10.340222] input: HP Webcam-101 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[ 10.340335] usbcore: registered new interface driver uvcvideo
[ 10.340337] USB Video Class driver (1.1.1)
[ 10.535709] cfg80211: World regulatory domain updated:
[ 10.535712] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 10.535715] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 10.535717] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 10.535719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 10.535721] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 10.535723] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 10.660352] Console: switching to colour frame buffer device 170x48
[ 10.664471] fb0: radeondrmfb frame buffer device
[ 10.664472] drm: registered panic notifier
[ 10.664479] [drm] Initialized radeon 2.12.0 20080528 for
0000:01:00.0 on minor 0
[ 10.664561] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 10.664658] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 10.664691] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 10.702591] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.702726] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 12.370221] Adding 3905532k swap on /dev/sda5. Priority:-1
extents:1 across:3905532k
[ 12.375243] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 12.778042] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 12.884200] loop: module loaded
[ 13.889699] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: (null)
[ 14.017171] fuse init (API version 7.17)
[ 15.519997] RPC: Registered named UNIX socket transport module.
[ 15.520005] RPC: Registered udp transport module.
[ 15.520010] RPC: Registered tcp transport module.
[ 15.520014] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.581893] FS-Cache: Loaded
[ 15.619991] FS-Cache: Netfs 'nfs' registered for caching
[ 15.640355] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.000166] r8169 0000:02:00.0: eth0: link down
[ 20.000186] r8169 0000:02:00.0: eth0: link down
[ 20.000549] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.551504] r8169 0000:02:00.0: eth0: link up
[ 21.551895] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.792154] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 25.979517] Bluetooth: RFCOMM TTY layer initialized
[ 25.979523] Bluetooth: RFCOMM socket layer initialized
[ 25.979525] Bluetooth: RFCOMM ver 1.11
[ 26.010216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.010222] Bluetooth: BNEP filters: protocol multicast
[ 26.547312] lp: driver loaded but no devices found
[ 26.650743] ppdev: user-space parallel port driver
[ 31.851776] eth0: no IPv6 routers present
[ 37.244247] Disabling lock debugging due to kernel taint
[ 37.257291] vboxdrv: Found 4 processor cores.
[ 37.257863] vboxdrv: fAsync=0 offMin=0x340 offMax=0x3b70
[ 37.258000] vboxdrv: TSC mode is 'synchronous', kernel timer mode
is 'normal'.
[ 37.258007] vboxdrv: Successfully loaded version 4.1.8_Debian
(interface 0x00190000).
[ 37.407843] vboxpci: IOMMU not found (not registered)
[ 285.115829] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 285.115852] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 285.115885] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 286.713009] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 286.713016] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 286.713027] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 286.924739] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 286.924751] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 286.924767] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 293.226411] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL]
size 160 (bits) (20110623/dsopcode-236)
[ 293.226428] ACPI Error: Method parse/execution failed
[\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)
[ 293.226452] ACPI Error: Method parse/execution failed
[\_SB_.WMID.WMAD] (Node ffff880133284e70), AE_AML_BUFFER_LIMIT
(20110623/psparse-536)

Please notice me if i have missed something, or
you need anything else.

Jonathan Nieder <jrnieder@gmail.com> írta (2012. február 20. 21:43):
> # guessing
> reassign 658401 src:linux-2.6 3.1.8-2
> quit
>
> Hi Gábor,
>
> Holger Levsen wrote:
>> On Donnerstag, 2. Februar 2012, Illés Gábor wrote:
>
>>> I have a fresh install of Wheezy on my new laptop, and noticed that my
>>> Wi-Fi adapter doesn't work. I turned on and off several times the wireless
>>> switch on the laptop's keyboard - no effect. Issued rfkill list command
>>> shows that the switch does not do anything: phy0 is soft and hard blocked
>>> too at all time (the hp-wifi Wireless LAN on the other way is stucked soft
>>> - yes, hard - no state). I have Windows installed on a different
>>> partition, haven't experienced any problem with the adapter.
>
> Thanks. *Please provide full "lsmod" output, and "dmesg" output from
> booting and trying to use wifi.
>
> Hope that helps,
> Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CAHn476SPC5tyOxqJV8ths63NtRZ5o04c1yej+4MmSF=8XPpG0 g@mail.gmail.com">http://lists.debian.org/CAHn476SPC5tyOxqJV8ths63NtRZ5o04c1yej+4MmSF=8XPpG0 g@mail.gmail.com

Gábor Illés 02-21-2012 07:27 AM

Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy
 
Not at all. Please do.



2012.02.21. 8:54, "Jonathan Nieder" <jrnieder@gmail.com> ezt írta:
Gábor Illés wrote:



> Dear Jonathan,

>

> Thank you for your response.

> Here is the lsmod output:



Thanks. *Do you mind if I forward this message to the bug log?

Jonathan Nieder 02-21-2012 07:54 AM

Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy
 
reassign 617202 src:linux-2.6 2.6.37-2
tags 617202 - moreinfo
found 658401 linux-2.6/3.2.4-1
merge 617202 658401
quit

Gábor Illés wrote:
> hp_wmi 13329 0
[...]
> [ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1)
[...]
> [ 0.000000] DMI: Hewlett-Packard HP 630 Notebook PC /3675, BIOS F.32 11/07/2011
[...]
> [ 8.970147] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[...]
> [ 285.115829] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)

Thanks. Mph.

I assume unloading the hp_wmi driver helps?

If so, please report this to <http://bugzilla.kernel.org/>, product
Drivers, component Platform_x86, and let us know the bug number so we
can track it. Be sure to mention:

- steps to reproduce, expected result, actual result, and how the
difference indicates a bug (should be simple in this case)
- which kernel versions you have tested and what happened with each
- full "dmesg" output from booting and reproducing the bug, as an
attachment
- "acpidump" output, as another attachment
- known workarounds if they exist
- any other weird symptoms or observations
- what kind of debugging you can do (e.g., if someone provides a
debugging patch, can you test it?)
- a link to http://bugs.debian.org/658401 for the backstory

Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120221085444.GC25865@burratino">http://lists.debian.org/20120221085444.GC25865@burratino

Gábor Illés 02-21-2012 08:12 AM

Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy
 
Unfortunately it didn't help. I blacklisted the hp_wmi driver, and reboot.
Now I don't have bluetooth (as a matter of fact it hadn't worked
either before - only in windows)
and rfkill list shows only the phy0 interface - still hard blocked.
The wifi switch
on the keyboard still does not do anything.



Jonathan Nieder <jrnieder@gmail.com> írta (2012. február 21. 9:54):
> reassign 617202 src:linux-2.6 2.6.37-2
> tags 617202 - moreinfo
> found 658401 linux-2.6/3.2.4-1
> merge 617202 658401
> quit
>
> Gábor Illés wrote:
>> hp_wmi * * * * * * * * 13329 *0
> [...]
>> [ * *0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1)
> [...]
>> [ * *0.000000] DMI: Hewlett-Packard HP 630 Notebook PC /3675, BIOS F.32 11/07/2011
> [...]
>> [ * *8.970147] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880133284858), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
> [...]
>> [ *285.115829] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
>
> Thanks. *Mph.
>
> I assume unloading the hp_wmi driver helps?
>
> If so, please report this to <http://bugzilla.kernel.org/>, product
> Drivers, component Platform_x86, and let us know the bug number so we
> can track it. *Be sure to mention:
>
> *- steps to reproduce, expected result, actual result, and how the
> * difference indicates a bug (should be simple in this case)
> *- which kernel versions you have tested and what happened with each
> *- full "dmesg" output from booting and reproducing the bug, as an
> * attachment
> *- "acpidump" output, as another attachment
> *- known workarounds if they exist
> *- any other weird symptoms or observations
> *- what kind of debugging you can do (e.g., if someone provides a
> * debugging patch, can you test it?)
> *- a link to http://bugs.debian.org/658401 for the backstory
>
> Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: CAHn476QdF=B-+Lcb_-Mn=w8=9k9XmU4gCEsZVg1dSFD8UYkO-w@mail.gmail.com">http://lists.debian.org/CAHn476QdF=B-+Lcb_-Mn=w8=9k9XmU4gCEsZVg1dSFD8UYkO-w@mail.gmail.com

Jonathan Nieder 02-21-2012 08:35 AM

Bug#658401: Atheros AR9285 Wi-Fi adapter not working on HP 630 notebook with Wheezy
 
unmerge 658401
notfound 617202 linux-2.6/3.1.8-2
notfound 617202 linux-2.6/3.2.4-1
notfound 658401 linux-2.6/2.6.37-2
tags 617202 + moreinfo
quit

Gábor Illés wrote:

> Unfortunately it didn't help. I blacklisted the hp_wmi driver, and reboot.
> Now I don't have bluetooth (as a matter of fact it hadn't worked
> either before - only in windows)
> and rfkill list shows only the phy0 interface - still hard blocked.
> The wifi switch
> on the keyboard still does not do anything.

Ah, ok. Drat. Does that at least help with the soft blocking? I
suppose rfkill list output would be useful for convenient reference.

Anyway, please report this at bugzilla.kernel.org, product Drivers,
component network-wireless, and let us know the bug number so we can
continue this there.



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120221093553.GB26416@burratino">http://lists.debian.org/20120221093553.GB26416@burratino


All times are GMT. The time now is 12:59 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.