FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-14-2012, 07:46 AM
Ralf Jung
 
Default Bug#638863: Partially fixed

Hi,

after upgrading to version 3.2.0-1 of the kernel, one of the two error
messages during startup is gone - the corresponding patch by Bjorn Helgaas has
been accepted upstream.
However, the timer error is still present:
$ dmesg | fgrep TCO
[ 11.915459] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.915563] SP5100 TCO timer: mmio address 0xfec000f0 already in use
(I attached the full dmesg log)

Bjorn also wrote patches for these, which I attached as well - however, the
upstream discussion about them just stopped at some point, and/or the patches
got lost while kernel.org was down. I do not know how this is usually handled.

Kind regards,
Ralf
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000acb70000 (usable)
[ 0.000000] BIOS-e820: 00000000acb70000 - 00000000acb80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000acb80000 - 00000000afd4f000 (usable)
[ 0.000000] BIOS-e820: 00000000afd4f000 - 00000000afdcf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afdcf000 - 00000000afecf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afecf000 - 00000000afeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard Compaq 615/308C, BIOS 68GVV Ver. F.0F 12/17/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 5 base 00FFF40000 mask FFFFFF0000 write-protect
[ 0.000000] 6 base 00ACB70000 mask FFFFFF0000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[ 0.000000] 0000000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00aff00000 page 4k
[ 0.000000] kernel direct mapping tables up to aff00000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ afd49000-afd4f000
[ 0.000000] RAMDISK: 36a46000 - 3751b000
[ 0.000000] ACPI: RSDP 00000000000f69a0 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 00000000afefe038 00040 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HP 0944 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 00000000afee2000 17A07 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: FACS 00000000afea1000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: MSCT 00000000afee0000 0004E (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedf000 00038 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afede000 002B4 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: SRAT 00000000afedd000 000A0 (v03 AMD ANT 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000acb70
[ 0.000000] 0: 0x000acb80 -> 0x000afd4f
[ 0.000000] 0: 0x000afeff -> 0x000aff00
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 982223
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 701816 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000acb70000 - 00000000acb80000
[ 0.000000] PM: Registered nosave memory: 00000000afd4f000 - 00000000afdcf000
[ 0.000000] PM: Registered nosave memory: 00000000afdcf000 - 00000000afecf000
[ 0.000000] PM: Registered nosave memory: 00000000afecf000 - 00000000afeff000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb01000
[ 0.000000] PM: Registered nosave memory: 00000000feb01000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964298
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3787484k/5242880k available (3368k kernel code, 1313988k absent, 141408k reserved, 3361k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2199.509 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.01 BogoMIPS (lpj=8798036)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004103] Security Framework initialized
[ 0.004110] AppArmor: AppArmor disabled by boot time parameter
[ 0.004549] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007587] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009600] Mount-cache hash table entries: 256
[ 0.009816] Initializing cgroup subsys cpuacct
[ 0.009823] Initializing cgroup subsys memory
[ 0.009845] Initializing cgroup subsys devices
[ 0.009851] Initializing cgroup subsys freezer
[ 0.009854] Initializing cgroup subsys net_cls
[ 0.009857] Initializing cgroup subsys blkio
[ 0.009911] tseg: 00aff00000
[ 0.009914] CPU: Physical Processor ID: 0
[ 0.009916] CPU: Processor Core ID: 0
[ 0.009919] mce: CPU supports 5 MCE banks
[ 0.010460] ACPI: Core revision 20110623
[ 0.020580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061655] CPU0: AMD Athlon(tm)X2 DualCore QL-66 stepping 01
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152008] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.152008] Measured 27224151 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.152008] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.152039] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152068] Brought up 2 CPUs
[ 0.152071] Total of 2 processors activated (8788.08 BogoMIPS).
[ 0.152691] devtmpfs: initialized
[ 0.156630] PM: Registering ACPI NVS region at acb70000 (65536 bytes)
[ 0.156630] PM: Registering ACPI NVS region at afdcf000 (1048576 bytes)
[ 0.156630] print_constraints: dummy:
[ 0.156630] NET: Registered protocol family 16
[ 0.156630] TOM: 00000000c0000000 aka 3072M
[ 0.156630] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.156630] TOM2: 0000000140000000 aka 5120M
[ 0.156688] Extended Config Space enabled on 0 nodes
[ 0.156704] ACPI: bus type pci registered
[ 0.156813] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156817] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.194011] PCI: Using configuration type 1 for base access
[ 0.194860] bio: create slab <bio-0> at 0
[ 0.194860] ACPI: Added _OSI(Module Device)
[ 0.194860] ACPI: Added _OSI(Processor Device)
[ 0.194860] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194860] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.196687] ACPI: EC: Look up EC in DSDT
[ 0.348086] ACPI: Interpreter enabled
[ 0.348092] ACPI: (supports S0 S3 S4 S5)
[ 0.348125] ACPI: Using IOAPIC for interrupt routing
[ 0.354098] ACPI: Power Resource [APPR] (off)
[ 0.433786] ACPI: Power Resource [PFN0] (off)
[ 0.433867] ACPI: Power Resource [PFN1] (off)
[ 0.433944] ACPI: Power Resource [PFN2] (off)
[ 0.434020] ACPI: Power Resource [PFN3] (off)
[ 0.436038] ACPI: Power Resource [PFN4] (off)
[ 0.436653] ACPI: Power Resource [PFN6] (off)
[ 0.436731] ACPI: Power Resource [PFN7] (off)
[ 0.436808] ACPI: Power Resource [PFN8] (off)
[ 0.436885] ACPI: Power Resource [PFN9] (off)
[ 0.436961] ACPI: Power Resource [PFNA] (off)
[ 0.437013] ACPI: Power Resource [PGF0] (off)
[ 0.437861] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.438229] ACPI: No dock devices found.
[ 0.438232] HEST: Table not found.
[ 0.438237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.438370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.438639] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.438643] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.438646] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.438649] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.438652] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.438654] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.438657] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.438660] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.438663] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.438666] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.438669] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.438671] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.438674] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.438677] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.438680] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.438683] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.438686] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfffdffff]
[ 0.438689] pci_root PNP0A03:00: host bridge window [mem 0xffe00000-0xffffffff]
[ 0.438694] pci_root PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.438702] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[ 0.438708] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.438730] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.438821] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.438918] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[ 0.438975] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.438980] pci 0000:00:04.0: PME# disabled
[ 0.439040] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[ 0.439094] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.439098] pci 0000:00:07.0: PME# disabled
[ 0.439157] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.439217] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.439221] pci 0000:00:09.0: PME# disabled
[ 0.439295] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.439320] pci 0000:00:11.0: reg 10: [io 0x6018-0x601f]
[ 0.439332] pci 0000:00:11.0: reg 14: [io 0x6024-0x6027]
[ 0.439345] pci 0000:00:11.0: reg 18: [io 0x6010-0x6017]
[ 0.439357] pci 0000:00:11.0: reg 1c: [io 0x6020-0x6023]
[ 0.439370] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.439382] pci 0000:00:11.0: reg 24: [mem 0xd4409000-0xd44093ff]
[ 0.439458] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.439475] pci 0000:00:12.0: reg 10: [mem 0xd4408000-0xd4408fff]
[ 0.439559] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.439577] pci 0000:00:12.1: reg 10: [mem 0xd4407000-0xd4407fff]
[ 0.439668] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.439693] pci 0000:00:12.2: reg 10: [mem 0xd4409500-0xd44095ff]
[ 0.439797] pci 0000:00:12.2: supports D1 D2
[ 0.439800] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.439805] pci 0000:00:12.2: PME# disabled
[ 0.439834] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.439852] pci 0000:00:13.0: reg 10: [mem 0xd4406000-0xd4406fff]
[ 0.439937] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.439954] pci 0000:00:13.1: reg 10: [mem 0xd4405000-0xd4405fff]
[ 0.440068] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.440092] pci 0000:00:13.2: reg 10: [mem 0xd4409400-0xd44094ff]
[ 0.440196] pci 0000:00:13.2: supports D1 D2
[ 0.440199] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.440204] pci 0000:00:13.2: PME# disabled
[ 0.440237] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.440368] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.440396] pci 0000:00:14.2: reg 10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.440479] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.440484] pci 0000:00:14.2: PME# disabled
[ 0.440504] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.440603] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.440663] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.440680] pci 0000:00:14.5: reg 10: [mem 0xd4404000-0xd4404fff]
[ 0.440770] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[ 0.440809] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[ 0.440839] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[ 0.440870] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[ 0.440909] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[ 0.441018] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[ 0.441031] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.441039] pci 0000:01:05.0: reg 14: [io 0x5000-0x50ff]
[ 0.441046] pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff]
[ 0.441063] pci 0000:01:05.0: reg 24: [mem 0xd4200000-0xd42fffff]
[ 0.441091] pci 0000:01:05.0: supports D1 D2
[ 0.441173] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.441179] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.441183] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.441188] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.441334] pci 0000:02:00.0: [11ab:4357] type 0 class 0x000200
[ 0.441380] pci 0000:02:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.441394] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.441536] pci 0000:02:00.0: supports D1 D2
[ 0.441538] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.441545] pci 0000:02:00.0: PME# disabled
[ 0.448094] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.448100] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.448104] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 0.448109] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.448147] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.448152] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.448156] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 0.448161] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.448296] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280
[ 0.448318] pci 0000:06:00.0: reg 10: [mem 0xd2000000-0xd2003fff 64bit]
[ 0.448427] pci 0000:06:00.0: supports D1 D2
[ 0.456110] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.456117] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.456226] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[ 0.456232] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.456241] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.456244] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.456247] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.456251] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.456254] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.456257] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.456261] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.456264] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.456267] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.456271] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.456274] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.456277] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.456280] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.456284] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.456287] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.456345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.456438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX0._PRT]
[ 0.456499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.456575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT]
[ 0.456643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.456794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.456833] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.456837] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.456840] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.465629] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465813] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465932] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465991] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.466050] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.466355] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.466355] vgaarb: loaded
[ 0.466355] vgaarb: bridge control possible 0000:01:05.0
[ 0.466355] PCI: Using ACPI for IRQ routing
[ 0.477275] PCI: pci_cache_line_size set to 64 bytes
[ 0.477633] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.477636] reserve RAM buffer: 00000000acb70000 - 00000000afffffff
[ 0.477641] reserve RAM buffer: 00000000afd4f000 - 00000000afffffff
[ 0.477645] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[ 0.477850] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.477856] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.479886] Switching to clocksource hpet
[ 0.482672] pnp: PnP ACPI init
[ 0.482702] ACPI: bus type pnp registered
[ 0.482886] pnp 00:00: [bus 00-ff]
[ 0.482890] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.482893] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.482898] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.482902] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.482905] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.482908] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.482911] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.482913] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.482916] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.482919] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.482922] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.482925] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.482928] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.482931] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.482934] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.482937] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.482940] pnp 00:00: [mem 0xf0000000-0xfffdffff window]
[ 0.482943] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.482946] pnp 00:00: [mem 0xffe00000-0xffffffff]
[ 0.483082] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.483285] pnp 00:01: [io 0x0000-0x000f]
[ 0.483288] pnp 00:01: [io 0x0081-0x008f]
[ 0.483291] pnp 00:01: [io 0x00c0-0x00df]
[ 0.483294] pnp 00:01: [dma 4]
[ 0.483342] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.483354] pnp 00:02: [io 0x00f0-0x00fe]
[ 0.483403] pnp 00:02: [irq 13]
[ 0.483455] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.483467] pnp 00:03: [io 0x0061]
[ 0.483512] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.483572] pnp 00:04: [io 0x0010-0x001f]
[ 0.483575] pnp 00:04: [io 0x002e-0x002f]
[ 0.483577] pnp 00:04: [io 0x004e-0x004f]
[ 0.483580] pnp 00:04: [io 0x0072-0x0073]
[ 0.483583] pnp 00:04: [io 0x0080]
[ 0.483585] pnp 00:04: [io 0x00b0-0x00b1]
[ 0.483589] pnp 00:04: [io 0x0092]
[ 0.483592] pnp 00:04: [io 0x0400-0x04cf]
[ 0.483595] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.483597] pnp 00:04: [io 0x04d6]
[ 0.483600] pnp 00:04: [io 0x0680-0x06ff]
[ 0.483603] pnp 00:04: [io 0x077a]
[ 0.483606] pnp 00:04: [io 0x0c00-0x0c01]
[ 0.483608] pnp 00:04: [io 0x0c14]
[ 0.483611] pnp 00:04: [io 0x0c50-0x0c52]
[ 0.483613] pnp 00:04: [io 0x0c6c]
[ 0.483616] pnp 00:04: [io 0x0c6f]
[ 0.483619] pnp 00:04: [io 0x0cd0-0x0cdb]
[ 0.483621] pnp 00:04: [io 0x0220-0x0227]
[ 0.483624] pnp 00:04: [io 0x0260-0x0273]
[ 0.483627] pnp 00:04: [io 0x0800]
[ 0.483629] pnp 00:04: [io 0x0804]
[ 0.483632] pnp 00:04: [io 0x087f]
[ 0.483635] pnp 00:04: [io 0x0cdc-0x0cdf]
[ 0.483637] pnp 00:04: [io 0x00b8]
[ 0.483640] pnp 00:04: [io 0x0022-0x0023]
[ 0.483643] pnp 00:04: [io 0x0b00-0x0b0f]
[ 0.483645] pnp 00:04: [io 0x0b20-0x0b3f]
[ 0.483648] pnp 00:04: [io 0x0200-0x027f]
[ 0.483767] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.483771] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.483774] system 00:04: [io 0x04d6] has been reserved
[ 0.483778] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.483781] system 00:04: [io 0x077a] has been reserved
[ 0.483784] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.483788] system 00:04: [io 0x0c14] has been reserved
[ 0.483791] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.483794] system 00:04: [io 0x0c6c] has been reserved
[ 0.483797] system 00:04: [io 0x0c6f] has been reserved
[ 0.483801] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.483804] system 00:04: [io 0x0220-0x0227] has been reserved
[ 0.483807] system 00:04: [io 0x0260-0x0273] has been reserved
[ 0.483811] system 00:04: [io 0x0800] has been reserved
[ 0.483814] system 00:04: [io 0x0804] has been reserved
[ 0.483817] system 00:04: [io 0x087f] has been reserved
[ 0.483822] system 00:04: [io 0x0cdc-0x0cdf] has been reserved
[ 0.483826] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.483830] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.483833] system 00:04: [io 0x0200-0x027f] could not be reserved
[ 0.483837] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483893] pnp 00:05: [mem 0x00000000-0x0009ffff]
[ 0.483896] pnp 00:05: [mem 0x000ec000-0x000fffff]
[ 0.483899] pnp 00:05: [mem 0x00100000-0xbfffffff]
[ 0.483902] pnp 00:05: [mem 0xe0000000-0xefffffff]
[ 0.483904] pnp 00:05: [mem 0xfeb00000-0xfeb00fff]
[ 0.483907] pnp 00:05: [mem 0xfec00000-0xfec00fff]
[ 0.483909] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[ 0.483923] pnp 00:05: [mem 0xffe00000-0xffffffff]
[ 0.484045] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.484050] system 00:05: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.484053] system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.484057] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.484061] system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.484064] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.484068] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.484072] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.484075] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.484144] pnp 00:06: [io 0x0070-0x0071]
[ 0.484150] pnp 00:06: [irq 8]
[ 0.484204] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.484326] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.484375] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.484414] pnp 00:08: [io 0x0060]
[ 0.484417] pnp 00:08: [io 0x0064]
[ 0.484456] pnp 00:08: [irq 1]
[ 0.484511] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.484560] pnp 00:09: [irq 12]
[ 0.484614] pnp 00:09: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
[ 0.485596] pnp: PnP ACPI: found 10 devices
[ 0.485599] ACPI: ACPI bus type pnp unregistered
[ 0.494442] PCI: max bus depth: 1 pci_try_num: 2
[ 0.494519] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.494523] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.494528] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.494533] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494539] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.494543] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.494547] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 0.494552] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.494557] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.494561] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.494565] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 0.494570] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.494575] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.494580] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.494587] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[ 0.494625] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.494649] pci 0000:00:01.0: setting latency timer to 64
[ 0.494657] pci 0000:00:04.0: setting latency timer to 64
[ 0.494663] pci 0000:00:07.0: setting latency timer to 64
[ 0.494670] pci 0000:00:09.0: setting latency timer to 64
[ 0.494680] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.494683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.494686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494689] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.494692] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.494695] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.494698] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.494701] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.494704] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.494707] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.494709] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.494712] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.494715] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.494718] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.494721] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.494724] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.494727] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.494730] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494734] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.494736] pci_bus 0000:02: resource 1 [mem 0xd3100000-0xd41fffff]
[ 0.494739] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.494743] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.494746] pci_bus 0000:03: resource 1 [mem 0xd2100000-0xd30fffff]
[ 0.494749] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.494752] pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd20fffff]
[ 0.494755] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff]
[ 0.494758] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7]
[ 0.494761] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff]
[ 0.494764] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494766] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.494769] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.494772] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.494775] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.494778] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.494781] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.494784] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.494787] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.494790] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.494793] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.494796] pci_bus 0000:80: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.494799] pci_bus 0000:80: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.494937] NET: Registered protocol family 2
[ 0.495177] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.497227] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.502421] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.503046] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.503049] TCP reno registered
[ 0.503069] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.503125] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.503390] NET: Registered protocol family 1
[ 0.503407] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.724084] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.780069] pci 0000:01:05.0: Boot video device
[ 0.780158] Unpacking initramfs...
[ 1.096811] Freeing initrd memory: 11092k freed
[ 1.105080] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.105086] Placing 64MB software IO TLB between ffff8800a8b70000 - ffff8800acb70000
[ 1.105089] software IO TLB at phys 0xa8b70000 - 0xacb70000
[ 1.105934] audit: initializing netlink socket (disabled)
[ 1.105952] type=2000 audit(1329208617.104:1): initialized
[ 1.138277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.173077] VFS: Disk quotas dquot_6.5.2
[ 1.173157] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.173296] msgmni has been set to 7419
[ 1.173612] alg: No test for stdrng (krng)
[ 1.173674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.173681] io scheduler noop registered
[ 1.173683] io scheduler deadline registered
[ 1.173744] io scheduler cfq registered (default)
[ 1.173895] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.173946] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.174020] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.174056] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.174130] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.174168] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.174457] ERST: Table is not found!
[ 1.174459] GHES: HEST is not enabled!
[ 1.174600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.220872] Linux agpgart interface v0.103
[ 1.221049] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.222961] i8042: Detected active multiplexing controller, rev 1.1
[ 1.223980] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.224018] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.224064] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.224100] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.224136] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.224360] mousedev: PS/2 mouse device common for all mice
[ 1.224458] rtc_cmos 00:06: RTC can wake from S4
[ 1.224600] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.224632] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.224646] cpuidle: using governor ladder
[ 1.224648] cpuidle: using governor menu
[ 1.224929] TCP cubic registered
[ 1.225038] NET: Registered protocol family 10
[ 1.225667] Mobile IPv6
[ 1.225670] NET: Registered protocol family 17
[ 1.225675] Registering the dns_resolver key type
[ 1.225914] PM: Hibernation image not present or could not be loaded.
[ 1.225928] registered taskstats version 1
[ 1.243731] rtc_cmos 00:06: setting system clock to 2012-02-14 08:36:57 UTC (1329208617)
[ 1.243815] Initializing network drop monitor service
[ 1.245215] Freeing unused kernel memory: 568k freed
[ 1.245527] Write protecting the kernel read-only data: 6144k
[ 1.249032] Freeing unused kernel memory: 712k freed
[ 1.252787] Freeing unused kernel memory: 684k freed
[ 1.263499] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.360412] udevd[52]: starting version 175
[ 1.419722] sky2: driver version 1.30
[ 1.419859] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.419912] sky2 0000:02:00.0: setting latency timer to 64
[ 1.420079] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 1.433590] usbcore: registered new interface driver usbfs
[ 1.433626] usbcore: registered new interface driver hub
[ 1.438761] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.439359] usbcore: registered new device driver usb
[ 1.439443] sky2 0000:02:00.0: eth0: addr d8:d3:85:1c:55:54
[ 1.440292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.440381] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.440411] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.440416] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.440450] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.440502] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.440541] QUIRK: Enable AMD PLL fix
[ 1.440545] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.440603] ehci_hcd 0000:00:12.2: debug port 1
[ 1.440635] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd4409500
[ 1.442004] SCSI subsystem initialized
[ 1.445764] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.445781] b43-pci-bridge 0000:06:00.0: setting latency timer to 64
[ 1.452175] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.452222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.452225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452228] usb usb1: Product: EHCI Host Controller
[ 1.452231] usb usb1: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.452233] usb usb1: SerialNumber: 0000:00:12.2
[ 1.452468] hub 1-0:1.0: USB hub found
[ 1.452477] hub 1-0:1.0: 6 ports detected
[ 1.452676] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.452763] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.452767] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.452781] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.452793] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.452821] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.452837] ehci_hcd 0000:00:13.2: debug port 1
[ 1.452871] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4409400
[ 1.458076] libata version 3.00 loaded.
[ 1.464056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.464129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.464132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464135] usb usb2: Product: EHCI Host Controller
[ 1.464138] usb usb2: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.464140] usb usb2: SerialNumber: 0000:00:13.2
[ 1.464304] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 1.464318] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 1.464326] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 1.464333] hub 2-0:1.0: USB hub found
[ 1.464336] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 1.464345] hub 2-0:1.0: 6 ports detected
[ 1.465511] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.465577] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.465609] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.465614] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.465632] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.465682] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd4408000
[ 1.492401] ACPI: Fan [FAN0] (off)
[ 1.492484] ACPI: Fan [FAN1] (off)
[ 1.492550] ACPI: Fan [FAN2] (off)
[ 1.492616] ACPI: Fan [FAN3] (off)
[ 1.492681] ACPI: Fan [FAN4] (off)
[ 1.492749] ACPI: Fan [FAN6] (off)
[ 1.492812] ACPI: Fan [FAN7] (off)
[ 1.492875] ACPI: Fan [FAN8] (off)
[ 1.492940] ACPI: Fan [FAN9] (off)
[ 1.493003] ACPI: Fan [FANA] (off)
[ 1.493047] ACPI: Fan [FANG] (off)
[ 1.514227] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.514232] ACPI: Thermal Zone [CPUZ] (43 C)
[ 1.515617] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.515620] ACPI: Thermal Zone [GFXZ] (30 C)
[ 1.520787] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 1.524655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.524661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524664] usb usb3: Product: OHCI Host Controller
[ 1.524667] usb usb3: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.524669] usb usb3: SerialNumber: 0000:00:12.0
[ 1.524856] hub 3-0:1.0: USB hub found
[ 1.524899] hub 3-0:1.0: 3 ports detected
[ 1.525006] ahci 0000:00:11.0: version 3.0
[ 1.525074] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.525215] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.525220] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc
[ 1.535537] scsi0 : ahci
[ 1.537780] scsi1 : ahci
[ 1.537968] ata1: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409100 irq 20
[ 1.537973] ata2: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409180 irq 20
[ 1.538109] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.538191] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 1.538196] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.538214] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.538250] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd4407000
[ 1.596107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.596112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.596115] usb usb4: Product: OHCI Host Controller
[ 1.596118] usb usb4: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.596120] usb usb4: SerialNumber: 0000:00:12.1
[ 1.596345] hub 4-0:1.0: USB hub found
[ 1.596354] hub 4-0:1.0: 3 ports detected
[ 1.596512] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.596594] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.596598] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.596610] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.596639] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd4406000
[ 1.656092] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.656098] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656101] usb usb5: Product: OHCI Host Controller
[ 1.656103] usb usb5: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.656106] usb usb5: SerialNumber: 0000:00:13.0
[ 1.656295] hub 5-0:1.0: USB hub found
[ 1.656307] hub 5-0:1.0: 3 ports detected
[ 1.656420] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.656501] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.656505] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.656517] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.656550] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd4405000
[ 1.716065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.716068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.716071] usb usb6: Product: OHCI Host Controller
[ 1.716073] usb usb6: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.716076] usb usb6: SerialNumber: 0000:00:13.1
[ 1.716215] hub 6-0:1.0: USB hub found
[ 1.716223] hub 6-0:1.0: 3 ports detected
[ 1.716355] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.716372] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.716376] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.716385] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.716417] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd4404000
[ 1.764068] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.776063] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.776066] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776069] usb usb7: Product: OHCI Host Controller
[ 1.776072] usb usb7: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.776074] usb usb7: SerialNumber: 0000:00:14.5
[ 1.776214] hub 7-0:1.0: USB hub found
[ 1.776221] hub 7-0:1.0: 2 ports detected
[ 1.860119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.862429] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 1.862433] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.864081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.864760] ata1.00: configured for UDMA/100
[ 1.865057] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 1.877098] ata2.00: ATAPI: hp DVD RW AD-7581S, 4H73, max UDMA/100
[ 1.890673] ata2.00: configured for UDMA/100
[ 1.894227] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7581S 4H73 PQ: 0 ANSI: 5
[ 1.897489] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[ 1.897495] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.898586] hub 1-1:1.0: USB hub found
[ 1.898724] hub 1-1:1.0: 4 ports detected
[ 1.905045] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.905192] sd 0:0:0:0: [sda] Write Protect is off
[ 1.905198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.905247] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.907373] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.907377] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.907528] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.953010] sda: sda1 sda2 sda3 < sda5 >
[ 1.953648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.008091] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.179568] usb 2-2: New USB device found, idVendor=04f2, idProduct=b159
[ 2.179574] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.179578] usb 2-2: Product: CNF8243
[ 2.179580] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.179582] usb 2-2: SerialNumber: SN0001
[ 2.515250] PM: Starting manual resume from disk
[ 2.515257] PM: Hibernation image partition 8:2 present
[ 2.515259] PM: Looking for hibernation image.
[ 2.515661] PM: Image not found (code -22)
[ 2.515667] PM: Hibernation image not present or could not be loaded.
[ 2.521335] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.521343] PM: Marking nosave pages: 00000000acb70000 - 00000000acb80000
[ 2.521347] PM: Marking nosave pages: 00000000afd4f000 - 00000000afeff000
[ 2.521357] PM: Marking nosave pages: 00000000aff00000 - 0000000100000000
[ 2.523000] PM: Basic memory bitmaps created
[ 2.543006] PM: Basic memory bitmaps freed
[ 2.556089] usb 6-3: new full-speed USB device number 2 using ohci_hcd
[ 2.585687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.729113] usb 6-3: New USB device found, idVendor=03f0, idProduct=231d
[ 2.729119] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.729122] usb 6-3: Product: HP Integrated Module
[ 2.729124] usb 6-3: Manufacturer: Broadcom Corp
[ 2.816641] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.935253] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[ 2.935259] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.024745] usb 1-1.3: new low-speed USB device number 4 using ehci_hcd
[ 3.137599] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c069
[ 3.137605] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.137609] usb 1-1.3: Product: USB Laser Mouse
[ 3.137611] usb 1-1.3: Manufacturer: Logitech
[ 10.765548] udevd[334]: starting version 175
[ 11.355338] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 11.355348] ACPI: Sleep Button [SLPB]
[ 11.355430] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 11.355510] ACPI: Lid Switch [LID]
[ 11.355602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.355607] ACPI: Power Button [PWRF]
[ 11.377430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.468379] acpi device:02: registered as cooling_device13
[ 11.468900] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[ 11.468908] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 11.482047] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.482325] ACPI: Battery Slot [BAT0] (battery present)
[ 11.483105] wmi: Mapper loaded
[ 11.490741] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.554372] ACPI: AC Adapter [AC] (on-line)
[ 11.587610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.628608] cfg80211: Calling CRDA to update world regulatory domain
[ 11.792246] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 11.915459] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.915563] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 11.975530] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 12.008443] cfg80211: World regulatory domain updated:
[ 12.008449] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.008453] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.008456] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.008459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.008462] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.008465] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.096567] Disabling lock debugging due to kernel taint
[ 12.096600] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.096969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.097582] Registered led device: b43-phy0::tx
[ 12.097610] Registered led device: b43-phy0::rx
[ 12.097633] Registered led device: b43-phy0::radio
[ 12.097654] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 12.300406] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 12.342772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 12.347624] [fglrx] Maximum main memory to use for locked dma buffers: 3553 MBytes.
[ 12.347723] [fglrx] vendor: 1002 device: 9612 count: 1
[ 12.348375] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 12.348393] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.348399] pci 0000:01:05.0: setting latency timer to 64
[ 12.348914] [fglrx] Kernel PAT support is enabled
[ 12.348944] [fglrx] module loaded - fglrx 8.93.4 [Dec 5 2011] with 1 minors
[ 12.660121] Bluetooth: Core ver 2.16
[ 12.660212] NET: Registered protocol family 31
[ 12.660215] Bluetooth: HCI device and connection manager initialized
[ 12.660220] Bluetooth: HCI socket layer initialized
[ 12.660223] Bluetooth: L2CAP socket layer initialized
[ 12.660236] Bluetooth: SCO socket layer initialized
[ 12.692609] Linux media interface: v0.10
[ 12.714588] Linux video capture interface: v2.00
[ 12.729977] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.828717] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
[ 12.829034] generic-usb 0003:046D:C069.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.3/input0
[ 12.829137] usbcore: registered new interface driver usbhid
[ 12.829140] usbhid: USB HID core driver
[ 12.865410] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
[ 12.865550] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.2-1.2/input0
[ 12.875433] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 12.875973] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input10
[ 12.876173] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.2-1.2/input1
[ 12.924589] usbcore: registered new interface driver btusb
[ 12.933007] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
[ 12.933119] usbcore: registered new interface driver uvcvideo
[ 12.933121] USB Video Class driver (1.1.1)
[ 13.108168] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 13.108181] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 13.108192] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.193014] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 13.208246] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 13.208382] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 13.768215] hp_wmi: Unknown event_id - 0 - 0x0
[ 13.768256] hp_wmi: Unknown event_id - 0 - 0x0
[ 13.853750] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k
[ 13.861168] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 13.955218] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.068983] device-mapper: uevent: version 1.0.3
[ 14.069095] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 34.606981] Intel AES-NI instructions are not detected.
[ 34.678034] padlock_sha: VIA PadLock Hash Engine not detected.
[ 35.189703] loop: module loaded
[ 35.743342] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 36.373508] fuse init (API version 7.17)
[ 37.880468] sky2 0000:02:00.0: eth0: enabling interface
[ 37.881324] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.280138] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 38.681366] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 38.801743] [fglrx] GART Table is not in FRAME_BUFFER range
[ 38.802120] [fglrx] Could not enable MSI; System prevented initialization
[ 38.802750] [fglrx] Firegl kernel thread PID: 1666
[ 38.802912] [fglrx] Firegl kernel thread PID: 1667
[ 38.802987] [fglrx] Firegl kernel thread PID: 1668
[ 38.803154] [fglrx] IRQ 18 Enabled
[ 39.090090] [fglrx] Gart USWC size:1160 M.
[ 39.090096] [fglrx] Gart cacheable size:459 M.
[ 39.090102] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 39.090105] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 39.815371] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 43.781444] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.782311] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.854167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 43.854171] Bluetooth: BNEP filters: protocol multicast
[ 43.883302] Bluetooth: RFCOMM TTY layer initialized
[ 43.883310] Bluetooth: RFCOMM socket layer initialized
[ 43.883313] Bluetooth: RFCOMM ver 1.11
[ 44.137597] lp: driver loaded but no devices found
[ 44.164509] ppdev: user-space parallel port driver
[ 47.690898] powernow-k8: Found 1 AMD Athlon(tm)X2 DualCore QL-66 (2 cpu cores) (version 2.20.00)
[ 47.691164] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 47.691166] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 48.294268] vboxdrv: Found 2 processor cores.
[ 48.294629] vboxdrv: fAsync=1 offMin=0x19f5417 offMax=0x19f5417
[ 48.294782] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 48.294784] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000).
[ 48.621790] vboxpci: IOMMU not found (not registered)
 

Thread Tools




All times are GMT. The time now is 05:11 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org