FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 12-24-2011, 05:17 PM
pol kh
 
Default Bug#653179: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity

Package: linux-2.6
Version: 3.1.5-1
Severity: normal

Dear Maintainer,

I can't manage WoW option on Ralink 5390 wi-fi card on my HP Pavilion dv6-6030er. Running Debian GNU/Linux testing+unstable. Notebook is switching on sometimes with wi-fi activity. In Win7 WoW can be switched off, but in GNU/Linux I can't do this. Also I can't switch WoW or WOL option off in BIOS, because this options are locked by vendor. I'm afaid of using cracked BIOS version with advanced menu available.

Some info:



$ lspci | grep Ralink
04:00.0 Network controller: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]



# ifconfig
eth0 Link encap:Ethernet HWaddr 68:b5:99:df:af:b0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:45 Base address:0x4000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2024 errors:0 dropped:0 overruns:0 frame:0
TX packets:2024 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:126000 (123.0 KiB) TX bytes:126000 (123.0 KiB)

wlan0 Link encap:Ethernet HWaddr 90:00:4e:65:8a:5a
inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::9200:4eff:fe65:8a5a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:161529 errors:0 dropped:0 overruns:0 frame:0
TX packets:120128 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:159220810 (151.8 MiB) TX bytes:19366763 (18.4 MiB)



# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bgn ESSID:"TP-LINK"
Mode:Managed Frequency:2.412 GHz Access Point: F4:EC:38:A5:7A:18
Bit Rate=58.5 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementn
Link Quality=70/70 Signal level=-35 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:40 Invalid misc:626 Missed beacon:0



# ethtool wlan0
Settings for wlan0:
Link detected: yes



# ethtool -s wlan0 wol d
Cannot get current wake-on-lan settings: Operation not supported
not setting wol



-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-7) ) #1 SMP Sun Dec 11 20:36:41 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=da760c42-f97a-4703-b0d7-0f25f4dbd8e7 ro quiet

** Tainted: PCO (5121)
* Proprietary module has been loaded.
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 4.489639] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.556130] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[ 4.556275] Registered led device: hp::hddprotect
[ 4.556285] hp_accel: driver loaded
[ 4.672083] kvm: Nested Virtualization enabled
[ 4.672086] kvm: Nested Paging enabled
[ 4.830710] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 5.105730] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.188647] loop: module loaded
[ 5.947960] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 5.980088] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.001960] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.028660] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.171038] RPC: Registered named UNIX socket transport module.
[ 7.171041] RPC: Registered udp transport module.
[ 7.171042] RPC: Registered tcp transport module.
[ 7.171044] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.241515] FS-Cache: Loaded
[ 7.260282] FS-Cache: Netfs 'nfs' registered for caching
[ 7.274563] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.751427] fuse init (API version 7.17)
[ 9.310007] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 10.467534] r8169 0000:03:00.0: eth0: link down
[ 10.468445] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.535481] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[ 10.573206] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.910443] vgaarb: this pci device is not a vga device
[ 12.910455] vgaarb: this pci device is not a vga device
[ 12.910463] vgaarb: this pci device is not a vga device
[ 12.910471] vgaarb: this pci device is not a vga device
[ 12.910480] vgaarb: this pci device is not a vga device
[ 12.910488] vgaarb: this pci device is not a vga device
[ 12.910496] vgaarb: this pci device is not a vga device
[ 12.910504] vgaarb: this pci device is not a vga device
[ 12.910512] vgaarb: this pci device is not a vga device
[ 12.910520] vgaarb: this pci device is not a vga device
[ 12.910528] vgaarb: this pci device is not a vga device
[ 12.910537] vgaarb: this pci device is not a vga device
[ 12.910545] vgaarb: this pci device is not a vga device
[ 12.910553] vgaarb: this pci device is not a vga device
[ 12.910561] vgaarb: this pci device is not a vga device
[ 12.910569] vgaarb: this pci device is not a vga device
[ 12.910576] vgaarb: this pci device is not a vga device
[ 12.910584] vgaarb: this pci device is not a vga device
[ 12.910592] vgaarb: this pci device is not a vga device
[ 12.910600] vgaarb: this pci device is not a vga device
[ 12.910608] vgaarb: this pci device is not a vga device
[ 12.910616] vgaarb: this pci device is not a vga device
[ 12.910624] vgaarb: this pci device is not a vga device
[ 12.910642] vgaarb: this pci device is not a vga device
[ 12.910659] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=nonew ns=none
[ 12.910674] vgaarb: this pci device is not a vga device
[ 12.910685] vgaarb: this pci device is not a vga device
[ 12.910696] vgaarb: this pci device is not a vga device
[ 12.910707] vgaarb: this pci device is not a vga device
[ 12.964707] [fglrx] ATIF platform detected with notification ID: 0x81
[ 13.072811] lp: driver loaded but no devices found
[ 13.089727] ppdev: user-space parallel port driver
[ 13.740810] wlan0: authenticate with f4:ec:38:a5:7a:18 (try 1)
[ 13.742322] wlan0: authenticated
[ 13.742690] wlan0: associate with f4:ec:38:a5:7a:18 (try 1)
[ 13.746657] wlan0: RX AssocResp from f4:ec:38:a5:7a:18 (capab=0x431 status=0 aid=1)
[ 13.746661] wlan0: associated
[ 13.761105] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.207792] powernow-k8: Found 1 AMD Phenom(tm) II N660 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[ 14.312430] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 14.312433] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 14.312435] powernow-k8: 2 : pstate 2 (2000 MHz)
[ 14.312436] powernow-k8: 3 : pstate 3 (1500 MHz)
[ 14.312437] powernow-k8: 4 : pstate 4 (800 MHz)
[ 14.536625] [fglrx] Could not enable MSI; System prevented initialization
[ 14.538118] [fglrx] Firegl kernel thread PID: 1818
[ 14.538288] [fglrx] Firegl kernel thread PID: 1819
[ 14.538489] [fglrx] Firegl kernel thread PID: 1820
[ 14.538672] [fglrx] IRQ 18 Enabled
[ 14.637767] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X
[ 14.639223] [fglrx] Firegl kernel thread PID: 1821
[ 14.639408] [fglrx] Firegl kernel thread PID: 1822
[ 14.639600] [fglrx] Firegl kernel thread PID: 1823
[ 14.639814] [fglrx] IRQ 49 Enabled
[ 16.171917] [fglrx] Gart USWC size:1280 M.
[ 16.171920] [fglrx] Gart cacheable size:508 M.
[ 16.171925] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.171927] [fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000
[ 16.171929] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 16.189491] [fglrx] Gart USWC size:1279 M.
[ 16.189494] [fglrx] Gart cacheable size:508 M.
[ 16.189498] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.189500] [fglrx] Reserved FB block: Unshared offset:fbfa000, size:401000
[ 16.189502] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 23.920153] wlan0: no IPv6 routers present
[ 29.824575] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 30.122106] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 30.351189] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 30.428435] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 30.740795] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 5029.620009] CE: hpet increased min_delta_ns to 20113 nsec
[25900.871739] [fglrx:__mc_heap_map_to_gart_space] *ERROR* The area of memory has already been mapped
[25900.871749] [fglrx:MCIL_MapToGartSpace] *ERROR* Could not map memory into GART space!
[26762.625906] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17

** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dv6 Notebook PC
product_version: 0596100000244710000010100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.21
board_vendor: Hewlett-Packard
board_name: 164B
board_version: 06.1F

** Loaded modules:
powernow_k8
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
parport_pc
ppdev
lp
parport
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
kvm_amd
kvm
snd_hda_codec_hdmi
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
sp5100_tco
i2c_piix4
snd_seq_midi_event
uvcvideo
videodev
media
v4l2_compat_ioctl32
snd_seq
cryptd
aes_x86_64
aes_generic
snd_timer
ecb
hp_wmi
snd_seq_device
fglrx(P)
joydev
btusb
psmouse
sparse_keymap
snd
bluetooth
i2c_core
usbhid
arc4
rt2800pci
rt2800lib
crc_ccitt
rt2x00pci
rt2x00lib
soundcore
snd_page_alloc
edac_core
mac80211
cfg80211
rfkill
hp_accel
lis3lv02d
eeprom_93cx6
shpchp
rts_pstor(C)
k10temp
evdev
input_polldev
hid
edac_mce_amd
serio_raw
pcspkr
pci_hotplug
wmi
video
ac
battery
power_supply
button
processor
ext4
mbcache
jbd2
crc16
sd_mod
sr_mod
cdrom
crc_t10dif
xhci_hcd
ohci_hcd
r8169
mii
thermal
thermal_sys
ahci
libahci
libata
ehci_hcd
scsi_mod
usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 68:b5:99:df:af:b0 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 90:00:4e:65:8a:5a brd ff:ff:ff:ff:ff:ff
inet 192.168.1.103/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::9200:4eff:fe65:8a5a/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 125500 2014 0 0 0 0 0 0 125500 2014 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 159003548 161095 0 0 0 0 0 0 19274952 119662 0 0 0 0 0 0

*** Protocol statistics:
Ip:
158367 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
153393 incoming packets delivered
120106 requests sent out
Icmp:
9 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 9
150 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 150
IcmpMsg:
InType3: 9
OutType3: 150
Tcp:
6048 active connections openings
18 passive connection openings
851 failed connection attempts
210 connection resets received
8 connections established
143294 segments received
110336 segments send out
349 segments retransmited
157 bad segments received.
1541 resets sent
Udp:
9152 packets received
150 packets to unknown port received.
0 packet receive errors
8939 packets sent
UdpLite:
TcpExt:
158 packets pruned from receive queue because of socket buffer overrun
2273 TCP sockets finished time wait in fast timer
3067 delayed acks sent
2 delayed acks further delayed because of locked socket
Quick ack mode was activated 670 times
89195 packet headers predicted
14261 acknowledgments not containing data payload received
2175 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using time stamp
1 congestion windows fully recovered without slow start
1 congestion windows partially recovered using Hoe heuristic
104 congestion windows recovered without slow start after partial ack
1 timeouts after reno fast retransmit
4 timeouts after SACK recovery
1 timeouts in loss state
4 fast retransmits
2 retransmits in slow start
267 other TCP timeouts
5015 packets collapsed in receive queue due to low socket buffer
547 DSACKs sent for old packets
24 DSACKs received
61 connections reset due to unexpected data
130 connections reset due to early user close
15 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 6
TCPSpuriousRTOs: 1
TCPSackShiftFallback: 134
TCPBacklogDrop: 17
IpExt:
InMcastPkts: 1120
OutMcastPkts: 404
InBcastPkts: 264
OutBcastPkts: 184
InOctets: 156775640
OutOctets: 15280955
InMcastOctets: 36679
OutMcastOctets: 16655
InBcastOctets: 49177
OutBcastOctets: 38633


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Advanced Micro Devices [AMD] Device [1022:1234]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0500000-f06fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:03.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 1) [1022:960b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0400000-f04fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f0300000-f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: f0100000-f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 5038 [size=8]
Region 1: I/O ports at 504c [size=4]
Region 2: I/O ports at 5030 [size=8]
Region 3: I/O ports at 5048 [size=4]
Region 4: I/O ports at 5010 [size=16]
Region 5: Memory at f070a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:12.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0708000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0707000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0706000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:16.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0705000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0704000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880M [Mobility Radeon HD 4200 Series] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at f0600000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at f0500000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci

01:05.1 Audio device [0403]: ATI Technologies Inc RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f0610000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Whistler [AMD Radeon HD 6600M Series] [1002:6741] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0400000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at f0420000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169

04:00.0 Network controller [0280]: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] [1814:539f]
Subsystem: Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless card [103c:1637]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci

05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts_pstor

06:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:164b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 064e:e258 Suyin Corp.
Bus 004 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 007 Device 002: ID 148f:2000 Ralink Technology, Corp.
Bus 007 Device 003: ID 138a:0018 Validity Sensors, Inc.


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3

Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>

Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink 0.34
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 330371324750671@web88.yandex.ru">http://lists.debian.org/330371324750671@web88.yandex.ru
 
Old 12-24-2011, 07:40 PM
Jonathan Nieder
 
Default Bug#653179: linux-image-3.1.0-1-amd64: Can't switch off WoW option of RT5390 wi-fi card, notebook wakes on wi-fi activity

retitle 653179 rt2800pci: missing ethtool wol command (ability to enable/disable wake-on-wlan)
severity 653179 wishlist
tags 653179 + upstream
quit

pol kh wrote:

> $ lspci | grep Ralink
> 04:00.0 Network controller: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]
[...]
> # ethtool -s wlan0 wol d
> Cannot get current wake-on-lan settings: Operation not supported
> not setting wol
[...]
> [ 10.535481] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[...]
> 04:00.0 Network controller [0280]: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] [1814:539f]
> Subsystem: Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless card [103c:1637]
[...]
> Kernel driver in use: rt2800pci

Thanks.

I'm surprised that wake-on-wlan is enabled by default for you --- is
that a BIOS setting?

In any event, the rt2800pci driver does not know how to handle the
wake-on-wlan bit, and that is a deficiency relative to the Windows
driver. I'd recommend getting in touch with the upstream developers
at users@rt2x00.serialmonkey.com to work on implementing it. Please
cc either me or this bug log when doing so so we can track it. They
may ask you to read registers set by the Windows driver or to test
patches. Once a patch has been accepted upstream, we can apply it.

Hope that helps,
Jonathan



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20111224204044.GG25883@elie.Belkin">http://lists.debian.org/20111224204044.GG25883@elie.Belkin
 

Thread Tools




All times are GMT. The time now is 03:17 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org